[The indication of bone scan for patients with newly diagnosed prostate cancer].

OBJECTIVE: To investigate the indication of bone scan for patients with newly diagnosed prostate cancer. METHODS: The clinical data of continual 95 patients with newly diagnosed prostate cancer was involved between January 2006 and December 2010. The relationship between age, PSA, Gleason scores, clinical stage and positive bone scans was respectively compared. RESULTS: The 33 patients (34.7%) with positive bone scans and 62 patients (65.3%) with negative bone scans. The mean age was (74±7) years and (76±7) years respectively in 2 groups respectively. PSA was (70.7±38.1) ng/ml and (28.4±27.2) ng/ml respectively, the difference was significant (t=-5.499, P=0.000). Clinical stage had positive correlation with positive bone scan, the OR value was 4.684. If the Gleason score>7, the sensitivity, specificity, positive predictive value and negative predictive value of positive bone scan was 64%, 63%, 48% and 77% respectively. If PSA>50 ng/ml, sensitivity, specificity, positive predictive value and negative predictive value was 67%, 86%, 71% and 83% respectively. If Clinical stage>T2, sensitivity, specificity, positive predictive value and negative predictive value was 82%, 81%, 69% and 89% respectively. CONCLUSIONS: For patients with PSA≤10 ng/ml or simultaneously PSA≤50 ng/ml and Gleason score≤7 and clinical stage≤T2, bone scan is not necessary. Patients with newly diagnosed prostate cancer and PSA>50 ng/ml or Gleason score>7 or clinical stage>T2 should undergo bone scan.

Mental health outcomes among patients from Fangcang shelter hospitals exposed to coronavirus disease 2019: An observational cross-sectional study.

BACKGROUND: The coronavirus disease 2019 (COVID-19) is not only attacking physical health, but it is also increasing psychological suffering. This study aimed to observe the impact of the COVID-19 pandemic on mental health outcomes among patients with mild to moderate illness in Fangcang shelter hospitals. METHODS: We conducted an observational, cross-sectional study of 129 patients with mild to moderate illness from Jiangxia Fangcang shelter hospitals in Wuhan, China. The participants were assessed by quantifying their symptoms of depression, anxiety, insomnia, and stressful life events and analyzing potential risk factors associated with these symptoms. Using correlation analysis, we examined associations between exposure to COVID-19 and subsequent psychological distress in response to the outbreak. RESULTS: In total, 49.6% of participants had depressive or anxiety symptoms. The depressive and anxiety symptoms were highly related to sleep disturbances and hypochondriasis (all r > 0.50, P < 0.01). The impact of the event was positively related to depressive symptoms, anxiety symptoms, sleep disturbances, hypochondriasis and life events (all r > 0.35, P < 0.01) but was negatively related to psychological resilience (r = -0.41, P < 0.01). The presence of the COVID-19 infection in this setting was associated with increased anxiety, depression and stress levels, and decreased sleep quality, and seriously affected patients' quality of life as well as adversely affecting the course and prognosis of physical diseases. CONCLUSION: The sleep quality, anxiety, and depression of COVID-19 patients in Fangcang shelter hospitals were significantly related to the impact of the epidemic.

Weighted Gene Coexpression Network Analysis Reveals Essential Genes and Pathways in Bipolar Disorder.

Bipolar disorder (BD) is a major and highly heritable mental illness with severe psychosocial impairment, but its etiology and pathogenesis remains unclear. This study aimed to identify the essential pathways and genes involved in BD using weighted gene coexpression network analysis (WGCNA), a bioinformatic method studying the relationships between genes and phenotypes. Using two available BD gene expression datasets (GSE5388, GSE5389), we constructed a gene coexpression network and identified modules related to BD. The analyses of Gene Ontology and Kyoto Encyclopedia of Genes and Genomes pathways were performed to explore functional enrichment of the candidate modules. A protein-protein interaction (PPI) network was further constructed to identify the potential hub genes. Ten coexpression modules were identified from the top 5,000 genes in 77 samples and three modules were significantly associated with BD, which were involved in several biological processes (e.g., the actin filament-based process) and pathways (e.g., MAPK signaling). Four genes (NOTCH1, POMC, NGF, and DRD2) were identified as candidate hub genes by PPI analysis and CytoHubba. Finally, we carried out validation analyses in a separate dataset, GSE12649, and verified NOTCH1 as a hub gene and the involvement of several biological processes such as actin filament-based process and axon development. Taken together, our findings revealed several candidate pathways and genes (NOTCH1) in the pathogenesis of BD and call for further investigation for their potential research values in BD diagnosis and treatment.

[Measuring and analyzing infrared spectrum of periodically polarized lithium niobate].

The present paper reports theoretical and experimental research on the tunable output characteristics of periodically polarized lithium niobate. We made six equal distance crystal grating sections, with each distance being 0.5 mm and the polarization period range of 29.0-31.5 mm. Especially, at room temperature, the signal-wavelength tunable output in the range of 1 449.7-1 665.0 nm and idle-wavelength tunable output in the range of 3 989.2-2 946.0 nm were achieved by LD end-pumped Nd : YVO4 laser with Q-switch in sound-wave. The lowest excitation threshold was 108.0 mW, while the highest excitation threshold was 149.2 mW. When the pump power was 649 mW, the highest gained signal-wave output was 118.5 mW and its conversion efficiency was 18.26%. Meanwhile, the idle-wave output was 46.6 mW and its conversion efficiency was 7.18%. These parameters approached the practicality level.

[Research of image spectrometer using linear variable interference filter].

In the present work we have designed a small-size portable imaging spectrometer using linear variable interference filter, with CCD camera as picture sensor, and micromotion stage to bring along interference filter which scan across every pixel of CCD array. The difference column pixel in the picture which we get at every step is monocolour partial image under different wavelength, with the step by step, these column monocolour pixels change the wavelength. And finally we reassembled these images and get the whole monocolour image with different wavelength. The interval of sweep step length decided by the required spectrum resolution and the required wavelength interval of different pictures. The experiment demonstrated the resolution of this spectrometer is about 16 nm, but that major reason of the limiting resolution is the band width of the linear variable interference filter. The spatial resolution of the instrument ultimately decided by CCD, filter and imaging lens. This spectrometer has some characters such as compact structure, higher spatial resolution, higher spectrum resolution, higher scan rate and so on. Furthermore, an application of this instrument in distinguishing from camouflage have been showed.

[Calculation of spectroscopic properties of Tm:YVO4 crystals].

Sigma and pi polarized absorption spectra of Tm:YVO4 crystal have been measured at room temperature. Considering the difference of the sigma and pi polarized absorption spectra and the changing of the refractive index with different wavelengths, we calculate the intensity parameters of Tm3+ in crystal YVO4 which are omega 2 = 1.9416 x 10(-20) (cm2), omega 4 = 0.1568 x 10(-20) (cm2), omega 6 = 0.3963 x 10(-20) (cm2) by Judd-Ofelt theory. The spectra characteristic parameters, such as radiative transition rates, luminescence branching ratio, total radiative lifetime and integral cross-section are also calculated. The results show that the spontaneous rate of the transition 1D2-->3F4 is much higher than that of the transition 1D2 to other levels.

Effect of Si-Miao-Yong-An on the stability of atherosclerotic plaque in a diet-induced rabbit model.

ETHNOPHARMACOLOGICAL RELEVANCE: Si-Miao-Yong-An (Trade name: Mai-Luo-Ning), a Chinese herbal formulation comprising Flos Lonicerae Japonicae, Radix Scrophulariae Ningpoensis, Radix Angelicae Sinensis and Radix Glycyrrhizae Uralensis, has been used in treating ischemic cardiovascular and cerebrovascular diseases for many years. Clinical and experimental studies have shown that Si-Miao-Yong-An can inhibit the inflammatory response and antagonize the blood clotting process. AIM OF THE STUDY: To investigate the effect of Si-Miao-Yong-An on atherosclerotic plaque stability in rabbit model. MATERIALS AND METHODS: Seventy male rabbits were divided into four groups. Rabbits in the normal group were fed with normal diet, while rabbits in model group and drug treatment groups were fed with high cholesterol diet, underwent BSA-induced immunologic injury and balloon-induced mechanical injury. After atherosclerotic rabbits were treated with simvastatin or Si-Miao-Yong-An for 16 weeks, blood and aorta in four groups were collected for analysis. RESULTS: Si-Miao-Yong-An reduced the level of triglycerides (TG) and low-density lipoprotein cholesterol (LDL-C) in blood after treatment for 16 weeks. Compared with model group, Si-Miao-Yong-An decreased the content of many inflammatory cytokines in blood and plaque. Morphological analysis of abdominal aorta showed that Si-Miao-Yong-An increased fibrous cap thickness and smooth muscle cells, reduced lipid core area and macrophages, and contributed to inhibit matrix degradation and inflammatory response. CONCLUSION: In this study, we provided evidence for that Si-Miao-Yong-An could promote the stability of atherosclerotic plaque in the rabbit model, indicating that this medicine was a reasonable drug treating cardiovascular diseases in clinical.

Comparison of the solutions from a novel variational method with numerical results for the study of beam propagation in a Kerr medium with nonlinear absorption.

We present results from a novel variational method for the study of beam propagation in a Kerr medium with nonlinear absorption. This new method combines the variational method and a nonlinear absorption equation and gives a concise expression for the combination. The results obtained with this method show good quantitative agreement with numerical solutions obtained with the finite-difference method. It is shown that the variational method takes much less time than a numerical simulation with the finite-difference method for analysis of beam propagation in a thick medium with nonlinear absorption and nonlinear refraction. The new method makes detailed analysis of beam propagation in a Kerr medium with nonlinear absorption very simple and fast.

Variational analysis of z scan of thick medium with an elliptic Gaussian beam.

By variational approach, we analyze the characteristics of beam propagation through a cubic optical nonlinear medium using a laser beam that has a transverse elliptic Gaussian profile. The analytic solution to the normalized transmittance at the center of the far field as a function of medium position and the beam characteristics is obtained and compared with the numerical simulation, which is realized by a combination of algorithms. We also analyze the peak-valley transmittance difference as a function of medium length, ellipticity, and a stigmatism. The relationship between peak-valley normalized transmittance difference of the z-scan trace and aperture size or the slit width are obtained. Meanwhile, the comparison of z-scan characteristics with an elliptic Gaussian beam with those using a circular symmetric Gaussian beam is made.

Narrow-linewidth widely tunable hybrid Q-switched double-clad fiber laser.

A laser-diode-pumped Yb-doped double-clad fiber laser operating in a hybrid Q-switched regime has been demonstrated. With pulsed pump light and stimulated Brillouin scattering of the gain fiber as the Q-switching mechanisms, the laser generated nanosecond pulses with a stable repetition rate. A single-pulse energy of as much as 143.1 microJ with a peak power of 28.6 kW was obtained. Use of an external-cavity diffraction grating in the Littman configuration permitted tuning of the laser wavelength over a 15.7-THz range from 1080 to 1140 nm, and a linewidth of 0.04 nm over the whole tuning range was achieved.