Dual-Site Doping in Transition Metal Oxide Cathode Enables High-Voltage Stability of Na-Ion Batteries.

Designing cathode materials that effectively enhancing structural stability under high voltage is paramount for rationally enhancing energy density and safety of Na-ion batteries. This study introduces a novel P2-Na0.73K0.03Ni0.23Li0.1Mn0.67O2 (KLi-NaNMO) cathode through dual-site synergistic doping of K and Li in Na and transition metal (TM) layers. Combining theoretical and experimental studies, this study discovers that Li doping significantly strengthens the orbital overlap of Ni (3d) and O (2p) near the Fermi level, thereby regulates the phase transition and charge compensation processes with synchronized Ni and O redox. The introduction of K further adjusts the ratio of Nae and Naf sites at Na layer with enhanced structural stability and extended lattice space distance, enabling the suppression of TM dissolution, achieving a single-phase transition reaction even at a high voltage of 4.4 V, and improving reaction kinetics. Consequently, KLi-NaNMO exhibits a high capacity (105 and 120 mAh g-1 in the voltage of 2-4.2 V and 2-4.4 V at 0.1 C, respectively) and outstanding cycling performance over 300 cycles under 4.2 and 4.4 V. This work provides a dual-site doping strategy to employ synchronized TM and O redox with improved capacity and high structural stability via electronic and crystal structure modulation.

Association between sleep apnea-specific hypoxic burden and severity of coronary artery disease.

PURPOSE: Sleep apnea-specific hypoxic burden (SASHB) is a polysomnographic metric that comprehensively measures the degree of nocturnal desaturation caused by obstructive sleep apnea. This research was conducted to elucidate the relationship between SASHB and coronary artery disease (CAD) severity. METHODS: We carried out a prospective study of hospitalized patients with CAD of unstable angina who were expected to undergo invasive coronary angiography at Beijing Anzhen Hospital from February to September 2023. SASHB values were calculated using a self-programmed C + + program. Multivariable logistic regression analysis was applied to identify the association between SASHB and the prevalence of severe CAD, documented by the Gensini Score, and the SYNTAX (Synergy between Percutaneous Coronary Intervention With Taxus and Cardiac Surgery) Score. RESULTS: This study enrolled 137 patients with a median age of 59 years, 96 (70.1%) of whom were male. A total of 125 (91.2%) patients had coronary stenosis of ≥ 50% in at least one location. Patients with a high SASHB of ≥ 18% min/h had a significantly higher Gensini Score (32.0 vs. 18.5, P = 0.002) and SYNTAX Score (14.0 vs. 7.0, P = 0.002) than those with a low SASHB. After adjusting for multiple covariates, a high SASHB was significantly associated with the prevalence of severe CAD, determined by a Gensini Score ≥ 21 (OR 2.67, P = 0.008) or a SYNTAX Score > 22 (OR 4.03, P = 0.016). CONCLUSION: Our findings revealed a robust and independent association between SASHB and CAD severity in patients with unstable angina, highlighting the potential value of SASHB as a predictor of risk and a target for interventions aimed at preventing cardiovascular diseases. TRIAL REGISTRATION: Chinese Clinical Trial Registry No. ChiCTR2300067991 on February 2, 2023.

Graphene-Enhanced UV-C LEDs.

Light-emitting diodes in the UV-C spectral range (UV-C LEDs) can potentially replace bulky and toxic mercury lamps in a wide range of applications including sterilization and water purification. Several obstacles still limit the efficiencies of UV-C LEDs. Devices in flip-chip geometry suffer from a huge difference in the work functions between the p-AlGaN and high-reflective Al mirrors, whereas the absence of UV-C transparent current spreading layers limits the development of UV-C LEDs in standard geometry. Here it is demonstrated that transfer-free graphene implemented directly onto the p-AlGaN top layer by a plasma enhanced chemical vapor deposition approach enables highly efficient 275 nm UV-C LEDs in both, flip-chip and standard geometry. In flip-chip geometry, the graphene acts as a contact interlayer between the Al-mirror and the p-AlGaN enabling an external quantum efficiency (EQE) of 9.5% and a wall-plug efficiency (WPE) of 5.5% at 8 V. Graphene combined with a ≈1 nm NiOx support layer allows a turn-on voltage <5 V. In standard geometry graphene acts as a current spreading layer on a length scale up to 1 mm. These top-emitting devices exhibit a EQE of 2.1% at 8.7 V and a WPE of 1.1%.

Inoculation of chromium-tolerant bacterium LBA108 to enhance resistance in radish (Raphanus sativus L.) and combined remediation of chromium-contaminated soil.

Cr(VI) has been a carcinogen for organisms and a hazard to human health throughout the food chain. To explore a cost-effective and efficient method for removing Cr(VI), a Cr-resistant strain named LBA108 was isolated from the soil of a molybdenum-lead mining area. It was identified as Microbacterium through biochemical tests and 16S rDNA sequence analysis. Following 48 hours of incubation in LB culture medium containing 60 mg L-1 Cr(VI), the LBA108 strain exhibited reduction and adsorption rates for Cr(VI) at 96.64% and 15.86%, respectively. The removal mechanism was subsequently confirmed through Fourier-transform infrared spectroscopy, X-ray photoelectron spectroscopy and X-ray diffraction analysis. In an experimental setup, radish seedlings were cultivated as test crops under varying levels of Cr stress (ranging from 0 to 7 mg L-1) in a hydroponic experiment. With the inoculation of the LBA108 strain, the fresh weight of radish seedlings increased by 2.05 times and plant length increased by 34.5% under 7 mg L-1 Cr stress. In addition, the plant produced more antioxidant enzymes/enhanced antioxidant enzyme activities such as superoxide dismutase and catalase to prevent oxidative stress. Under Cr stress (6 mg L-1), the accumulation of Cr in rhizomes of radish seedlings increased compared to the control group by 91.44%, while the absorption of Cr by leaves decreased by 52.10%. These findings suggest that the LBA108 strain possesses bioremediation capabilities as a microbial-phytoremediation option for Cr-contaminated soil.

Growth of millimeter-sized 2D metal iodide crystals induced by ion-specific preference at water-air interfaces.

Conventional liquid-phase methods lack precise control in synthesizing and processing materials with macroscopic sizes and atomic thicknesses. Water interfaces are ubiquitous and unique in catalyzing many chemical reactions. However, investigations on two-dimensional (2D) materials related to water interfaces remain limited. Here we report the growth of millimeter-sized 2D PbI2 single crystals at the water-air interface. The growth mechanism is based on an inherent ion-specific preference, i.e. iodine and lead ions tend to remain at the water-air interface and in bulk water, respectively. The spontaneous accumulation and in-plane arrangement within the 2D crystal of iodide ions at the water-air interface leads to the unique crystallization of PbI2 as well as other metal iodides. In particular, PbI2 crystals can be customized to specific thicknesses and further transformed into millimeter-sized mono- to few-layer perovskites. Additionally, we have developed water-based techniques, including water-soaking, spin-coating, water-etching, and water-flow-assisted transfer to recycle, thin, pattern, and position PbI2, and subsequently, perovskites. Our water-interface mediated synthesis and processing methods represents a significant advancement in achieving simple, cost-effective, and energy-efficient production of functional materials and their integrated devices.