RESUMO
In pursuit of a sustainable future powered by renewable energy, hydrogen production through water splitting should achieve high energy efficiency with economical materials. Here, we present a nanofluidic electrolyzer that leverages overlapping cathode and anode electric double layers (EDLs) to drive the splitting of pure water. Convective flow is introduced between the nanogap electrodes to suppress the crossover of generated gases. The strong electric field within the overlapping EDLs enhances ion migration and facilitates the dissociation of water molecules. Acidic and basic environments, which are created in situ at the cathode and anode, respectively, enable the use of nonprecious metal catalysts. All these merits allow the reactor to exhibit a current density of 2.8 A·cm-2 at 1.7 V with a nickel anode. This paves the way toward a new type of water electrolyzer that needs no membrane, no supporting electrolyte, and no precious metal catalysts.
RESUMO
Candida albicans, an opportunistic oral pathogen, synergizes with Staphylococcus aureus, allowing bacteria to co-invade and systemically disseminate within the host. Studying human-microbe interactions creates the need for a universal culture medium that supports fungal, bacterial, and human cell culturing, while allowing sensitive analytical approaches such as OMICs and chromatography techniques. In this study, we established a fully defined, customizable adaptation of Dulbecco's modified Eagle medium (DMEM), allowing multi-kingdom culturing of S. aureus, C. albicans, and human oral cell lines, whereas minimal version of DMEM (mDMEM) did not support growth of S. aureus, and neither did supplementation with dextrose, MEM non-essential amino acids, pyruvate, and Glutamax. This new medium composition, designated as "mDMEM-DMP," promoted growth of all tested S. aureus strains. Addition of 25 mM 4-(2-hydroxyethyl)-1-piperazineethanesulfonic acid (HEPES) further improved growth, while higher concentrations did not improve growth any further. Higher concentrations of HEPES did result in prolonged stabilization of medium pH. mDMEM-DMP promoted (hyphal) C. albicans monoculturing and co-culturing on both solid and semi-solid surfaces. In contrast to S. aureus, addition of HEPES reduced C. albicans maximum culture optical density (OD). Finally, only buffered mDMEM-DMP (100 mM HEPES) was successful in maintaining the metabolic activity of human oral Ca9-22 and HO1N1 cell lines for 24 hours. Altogether, our findings show that mDMEM-DMP is a versatile and potent culture medium for both microbial and human cell culturing, providing a customizable platform to study human as well as microbial molecular physiology and putative interactions. IMPORTANCE: Interaction between microbes and the host are in the center of interest both in disease and in health. In order to study the interactions between microbes of different kingdoms and the host, alternative media are required. Synthetic media are useful as they allow addition of specific components. In addition, well-defined media are required if high-resolution analyses such as metabolomics and proteomics are desired. We describe the development of a synthetic medium to study the interactions between C. albicans, S. aureus, and human oral epithelial cells. Our findings show that mDMEM-DMP is a versatile and potent culture medium for both microbial and human cell culturing, providing a customizable platform to study human as well as microbial molecular physiology and putative interactions.
Assuntos
Candida albicans , Meios de Cultura , Células Epiteliais , Staphylococcus aureus , Candida albicans/efeitos dos fármacos , Candida albicans/crescimento & desenvolvimento , Candida albicans/fisiologia , Humanos , Staphylococcus aureus/fisiologia , Staphylococcus aureus/crescimento & desenvolvimento , Staphylococcus aureus/efeitos dos fármacos , Meios de Cultura/química , Células Epiteliais/microbiologia , Linhagem Celular , Boca/microbiologiaRESUMO
As a combination of direct detection and coherent detection technologies, self-coherent detection has the advantages of low cost and optical field recovery ability. However, most of the self-coherent detection techniques are limited to single sideband (SSB) signals. Recently, carrier-assisted differential detection (CADD) has been proposed to realize complex-valued double sideband (DSB) signals, but it requires a high carrier-to-signal power ratio (CSPR) to mitigate the signal-to-signal beat interference (SSBI). Later, a more cost-effective symmetric CADD (S-CADD) has been proposed while the required CSPR is still high. In order to alleviate the high requirements of CSPR, we propose a scheme based on the joint of digital pre-distortion (DPD) at transmitter and clipping at receiver to further improve the S-CADD system performance. This joint processing can not only solve the problem of non-uniform distribution of subcarrier signal-to-noise ratio (SNR) caused by non-ideal transfer function, but also the error propagation problem caused by enhanced SSBI under low CSPR. After the validation of the 64 Gbaud 16-ary quadrature amplitude modulation (16-QAM) orthogonal frequency division multiplexing (OFDM) signal transmitted over 80â km standard single mode fiber (SSMF), the CSPR required by the proposed scheme to reach the 20% soft decision-forward error correction (SD-FEC) and 7% hard decision-forward error correction (HD-FEC) can be reduced by 1.3â dB and 2.8â dB, respectively, with a comparison of the conventional S-CADD. The results show the potential of the proposed scheme in the short-reach optical transmissions.
RESUMO
The multi-eigenvalue multiplexing-based discrete spectrum-modulated nonlinear frequency-division multiplexing (DS-NFDM) system with higher-order modulation format has been demonstrated experimentally. After designing the coefficients of the eigenvalue set and the constellation point distribution of 16-amplitude phase shift keying (16-APSK), the realizations of 14-, 30-, and 46-eigenvalue multiplexed DS-NFDM signals have been implemented. The results show that 46-eigenvalue and 30-eigenvalue multiplexed DS-NFDM signals can transmit 50â km and 400â km over a nonzero dispersion-shifted fiber (NZDSF) under soft-decision forward error correction (SD-FEC) threshold of 2.4E-2, respectively. This demonstration shows for the first time, to the best of our knowledge, the record for multiplexed eigenvalue number and data rate of the multiple-eigenvalue-based DS-NFDM system.
RESUMO
Aiming to further improve the spectral efficiency (SE) of a continuous spectrum modulated nonlinear frequency division multiplexing (CS-NFDM) system, we propose a novel ,to the best of our knowledge, multiple-signal-joint-processing (MSJP)-based guard interval (GI) shortening method. In this method, multiple NFDM time-domain signals are jointly processed as a whole to carry out nonlinear Fourier transform and inverse nonlinear Fourier transform (NFT-INFT) operations. These operations can fuse the multiple NFDM time-domain signals together, which is equivalent to the corresponding inverse process of a fiber transmission. Experimental results show that the normalized SE of the proposed method can reach 0.99 when approaching the limit value of 1 and obtain a 2.33â dB Q2-factor improvement compared with the pre-dispersion compensation (PDC) method under the same GI of 0.03â ns in an 80â km SSMF transmission of a 46â GHz signal bandwidth. Furthermore, in comparison with the PDC method, the proposed method can achieve 32.86% normalized SE improvement in the 1120â km SSMF transmission of 32â GHz signal bandwidth under the SD-FEC of 2.4E-2.
RESUMO
We propose a high-speed multimode fiber short-reach optical interconnect system based on a Kramers-Kronig (KK) field reconstruction with the mode division multiplexing (MDM) and polarization division multiplexing (PDM) technology. In this work, the LP01, LP21a, LP21b, and LP02 modes are selected as independent channels to carry information. The demonstration achieved the 800â Gb/s net data rate per wavelength with a bit-rate-distance-product (BDP) of 8â Tb/s·km. To the best of our knowledge, this is the highest experimental record of a single wavelength BDP over the SMMF with KK detection. In addition, we discuss the system performance after all multiple-input multiple-output (MIMO) and partial MIMO processing and give guidance on the trade-off between system performance and computational resource.
RESUMO
Pyrrole-based polymers (PBPs), a type of fascinating functional polymers, play a crucial role in materials science. However, efficient synthetic strategies of PBPs with diverse structures are mainly focused on conjugated polypyrroles and still remain challenging. Herein, an atom and step economy protocol is described to access various 2,4-disubstituted PBPs by in situ formation of pyrrole core structure via copper-catalyzed [3+2] polycycloaddition of dialkynones and diisocyanoacetates. A series of PBPs is prepared with high molecular weight (Mw up to 18 200 Da) and moderate to good yield (up to 87%), which possesses a fluorescent emission located in the green to yellow light region. Blending the PBPs with polyvinyl alcohol, the stretchable composite films exhibit a significant strengthening of the mechanical properties (tensile stress up to 59 MPa, elongation at break >400%) and an unprecedented stress-responsive luminescence enhancement that over fourfold fluorescent emission intensity is maintained upon stretching up to 100%. On the basis of computational studies, the unique photophysical and mechanical properties are attributed to the substitution of carbonyl chromophores on the pyrrole unit.
Assuntos
Cobre , Polímeros , Pirróis , Pirróis/química , Cobre/química , Catálise , Polímeros/química , Polímeros/síntese química , Estrutura Molecular , Reação de CicloadiçãoRESUMO
Development and fabrication of a novel gas sensor with superb performance are crucial for enabling real-time monitoring of ethylene (C2H4) and formaldehyde (H2CO) emissions from industrial manufacture. Herein, first-principles calculations and AIMD simulations were carried out to investigate the effect of the Fe-M dimer on the adsorption of C2H4 and H2CO on metal dimer phthalocyanine (FeMPc, M = Ti-Zn) monolayers, and the electronic structures and sensing properties of the above adsorption systems were systematically discussed. The results show that the FeMPc (M = Ti, V, Cr, Mn) monolayers interact with C2H4 and H2CO by chemisorption except for the FeMnPc/H2CO system, while the other adsorption systems are all characterized by physisorption. Interestingly, the adsorption strength of C2H4 and H2CO can be effectively regulated by the bimetallic synergy of the Fe-M dimer. Moreover, the FeCrPc and FeMnPc monolayers exhibit excellent sensitivity towards C2H4 and H2CO, and have short recovery time (4.69 ms-2.31 s) for these gases at room temperature due to the effective surface diffusion at 300 K. Consequently, the FeCrPc and FeMnPc materials can be utilized as high-performance, reusable gas sensors for detecting C2H4 and H2CO, and have promising applications in monitoring the release of ethylene and formaldehyde from industrial processes.
RESUMO
The development of site-selective functionalization of N-heteroarenes is highly desirable in streamlined synthesis. In this context, direct amination of pyridines stands as an important synthetic methodology, with particular emphasis on accessing 4-aminopyridines, a versatile pharmacophore in medicinal chemistry. Herein, we report a reaction manifold for the C4-selective amination of pyridines by employing nucleophilic substitution of hydrogen (SNH). Through 4-pyridyl pyridinium salt intermediates, 4-aminopyridine products are obtained in reaction with aqueous ammonia without intermediate isolation. The notable regioselectivity was achieved by the electronic tuning of the external pyridine reagents along with the maximization of polarizability in the proton elimination stage. Further mechanistic investigations provided a guiding principle for the selective C-H pyridination of additional N-heteroarenes, presenting a strategic avenue for installation of diverse functional groups.
RESUMO
OBJECTIVE: This study aimed to investigate whether Functional Electrical Stimulation (FES) and Transcranial Direct Current Stimulation (tDCS) enhanced the effect of Occupational Therapy (OT) on post-stroke limb functional recovery and quality of life, using direct and network meta-analysis. METHODS: A computerized search was conducted in databases such as Medline, Web of Science, Embase, CNKI (China National Knowledge Infrastructure), Wanfang Data, and VIP Information for prospective randomized controlled trials on OT, FES, and tDCS for improving post-stroke limb motor function and quality of life, with the search cutoff date of July 1, 2023. RESULTS: Following the screening process, a total of 8 research articles were incorporated, encompassing 358 participants. Among these, 177 individuals underwent OT exclusively, while 181 individuals underwent a combined regimen of OT alongside electromagnetic therapy. In terms of the intervention methods, the control group received OT treatment only, while the experimental group employed tDCS in 5 studies and FES in 3 studies. Within these investigations, Fugl-Meyer Assessment (FMA) scores were reported in 8 studies. The aggregated mean difference (MD) for FMA scores was 5.08 (95% CI: 2.46, 7.71), with a specific MD of 2.77 (95% CI: 1.46, 4.09) for the tDCS subgroup and 9.04 (95% CI: 5.34, 12.73) for the FES subgroup. Notably, FES combined with OT exhibited significant advantages in enhancing FMA scores when compared to the combination of tDCS and OT. Furthermore, four studies provided data on modified Barthel Index (MBI) scores, yielding a collective MD of 7.20 (95% CI: 4.44, 9.95). CONCLUSION: In patients with stroke, both FES combined with OT and tDCS combined with OT exhibit substantial enhancements in limb function and quality of life compared to OT alone. Notably, FES combined with OT yields superior clinical benefits when compared to the amalgamation of tDCS and OT.
RESUMO
This paper proposes a composite sliding mode control (SMC) to optimize the tracking performance and the anti-disturbance performance of permanent magnet synchronous machine (PMSM) speed regulation systems. The differential term in the control law can magnify the measurement noise, resulting in more discontinuity. To filter out the high frequency noise and make the control law smoother, the first-order differentiator (FOD) is employed to estimate the speed error and its derivative. Since the feedforward compensation can improve the robustness of the system, a disturbance observer (DOB) based on the sliding mode observer (SMO) is designed to reinforce the dynamic performance under disturbance variation. Under the effect of the feedforward compensation, chattering can be further weakened by decreasing the switching gain appropriately. Finally, the effectiveness of the proposed methods is confirmed by various experimental results.
RESUMO
Using the linear approach to design a controller is still prevalent. The state feedback control (SFC) is applied in this paper to improve the dynamic response of permanent magnet synchronous machine (PMSM) speed regulation systems. First, a third-order augmented system is constructed for the reason that a higher-order system has better disturbance rejection. It can be found through analysis and comparison that the order of the proposed speed controller is increased. The parameters of SFC are selected by utilizing the linear quadratic regulator (LQR), and the influence of matrix Q on dynamic performance is detailed through the Bode diagram. Additionally, considering parametric uncertainties and unmodeled dynamics, a disturbance observer (DOB) using the Luenberger observer is designed to further boost anti-disturbance performance. Finally, plenty of experimental results verify the effectiveness of the proposed methods.
RESUMO
Carbonyl compounds have a profound role in atmospheric chemistry, which can cause the formation of ozone and secondary organic aerosols. On-road vehicle emissions are an important source of carbonyl compounds, but systematic knowledge of real-world emission characteristics is still scarce. In this study, a total of 181 on-road vehicles of 16 types in Beijing and Zhengzhou, China, were tested using portable emission measurement system under real-world driving conditions. The total carbonyl compound emission factors of gasoline vehicles, diesel vehicles, motorcycles, and agricultural transport vehicles were 24.9 ± 11.4 mg/km, 42.5 ± 21.5 mg/km, 20.4 ± 6.8 mg/km, and 78.3 ± 34.3 mg/km, respectively. Vehicles fueled with E10 ethanol gasoline had significantly higher carbonyl compound emission factors compared to E0 gasoline vehicles. It was observed that the continuous tightening of emission standards has effectively reduced the emissions of carbonyl compounds from on-road vehicles. The carbonyl compound emission factors on highways were 1.3-1.9 times lower than those on general roads. The total carbonyl compound emissions from on-road vehicles in Beijing and Zhengzhou in 2019 were estimated to be 3.5 kt and 3.1 kt, with corresponding ozone formation potentials of 24.4 kt and 21.4 kt, respectively. Formaldehyde, acetaldehyde, propionaldehyde and acetone were the most significant contributors to total carbonyl compound emissions, and among them, formaldehyde, acetaldehyde and propionaldehyde were the main contributors to total ozone formation potential. Our results provide updated and supplementary information on on-road vehicle emission factors for carbonyl compounds and can facilitate the improvement of emission inventories and help in the development of control strategies to improve air quality.
RESUMO
Lithium-sulfur (Li-S) batteries have high theoretical energy density and are regarded as a promising candidate for next-generation energy storage systems. However, their practical applications are hindered by the slow kinetics of sulfur conversion and polysulfide shuttling. In particular, large-scale pouch cells show much poor cyclability. Here, we develop a high-efficiency catalyst of V-doped CoSe2 by studying the binary CoSe2-VSe2 system and confirming its effectiveness in accelerating polysulfide conversion. The coin cell tests reveal an initial capacity of 1414 mAh g-1 at 0.1 C and 1049 mAh g-1 at 1 C and demonstrate 1000 times cyclability with a decaying rate of 0.05% per cycle. Furthermore, the assembly and construction of pouch cells were optimized with monolithic three-dimensional (3D) electrodes and a multistacking strategy. Specifically, a 3D metallic scaffold (3MS) was developed to host V-doped CoSe2 nanowires and sulfur. In addition, Janus microspheres of C@TiO2 were synthesized to capture polar polysulfides with their polar part of TiO2 and adsorb nonpolar sulfur with their nonpolar part of carbon. By integrating with 3MS, C@TiO2 microspheres can block all ion channels of 3MS and only allow Li ions in and out. These integral designs and monolithic structures enable multistacking pouch cells with high cyclability. A high-loading pouch cell was demonstrated with a total capacity of 700 mAh. The cell can be cycled for 70 times with a capacity retention of 65.7%. In brief, this work provides an integral strategy of catalyst design and overall 3D assembly for practical Li-S batteries in a large pouch cell format.
RESUMO
ß-Elemene, an important component of the volatile oil of Atractylodis macrocephala, has been widely utilized as an antitumor drug for over 20 years. However, the germacrene A synthase (GAS) genes responsible for the biosynthesis of ß-elemene in A. macrocephala were previously unidentified. In this study, two new AmGASs were identified from the A. macrocephala transcriptome, demonstrating their capability to convert farnesyl pyrophosphate into germacrene A, which subsequently synthesizes ß-elemene through Cope rearrangement. Additionally, two highly catalytic AmGAS1 mutations, I307A and E392A, resulted in a 2.23-fold and 1.57-fold increase in ß-elemene synthesis, respectively. Furthermore, precursor supply and fed-batch strategies were employed to enhance the precursor supply, resulting in ß-elemene yields of 7.3 mg/L and 33.3 mg/L, respectively. These findings identify a promising candidate GAS for ß-elemene biosynthesis and lay the foundation for further functional studies on terpene synthases in A. macrocephala.
Assuntos
Sesquiterpenos de Germacrano , Sesquiterpenos , Sesquiterpenos/metabolismo , Sesquiterpenos/química , Sesquiterpenos de Germacrano/metabolismo , Alquil e Aril Transferases/metabolismo , Alquil e Aril Transferases/genética , Proteínas de Plantas/genética , Proteínas de Plantas/metabolismo , Fosfatos de Poli-Isoprenil/metabolismo , Atractylodes/metabolismo , Atractylodes/química , Atractylodes/genética , Vias Biossintéticas , TranscriptomaRESUMO
The RNA-Seq technology was used to screen the key genes that affect the early development of the testes of Duroc × Landrace × Yorkshire piglets, to determine the regulatory pathway and provide reference for subsequent reproductive performance research, breeding, and other production practices. This study selected 14-day-old Duroc × Landrace × Yorkshire piglets as the trial animals. Testes from piglets with similar weights and no pathological changes were divided into small testis (ST) and large testis (LT) groups, and the RNA-Seq screening of differentially expressed genes (DEGs) was performed to find candidate genes and regulatory pathways related to early testicular development. The results show that 570 DEGs were found in the ST and LT groups, with 281 upregulated and 289 downregulated. The DEGs were mainly enriched on 47 gene ontology (GO) functional items. The Kyoto encyclopedia of genes and genotypes (KEGG) enrichment analysis found that there were 44 significantly enriched KEGG signal pathways, and the regulation of testicular development mainly focused on the arachidonic acid metabolism, Wnt signaling pathway and GnRH secretion pathways. The PTGES, SFRP1, SPP1, PLA2G4E, KCNJ5, PTGS2, and HCN1 genes were found to be as closely related to the testicular development of these Duroc × Landrace × Yorkshire piglets, and the differential gene expression was consistent with the real-time quantitative reverse transcription PCR (real-time qRT-PCR) validation results. This study was validated by high-throughput sequencing analysis and real-time qRT-PCR, and showed that the PTGES, SFRP1, SPP1, PLA2G4E, KCNJ5, PTGS2, and HCN1 genes may be involved in the regulation of germ cell development, spermatogenesis and semen traits. These should be further studied as candidate genes for early testicular development and reproductive trait regulation in boars.
RESUMO
HFO-1234yf (2,3,3,3-tetrafluoropropene) is being used as refrigerant to replace HFC-134a (1,1,1,2-tetrafluoroethane), a potent greenhouse gas, in mobile air conditioners. However, the environmental impacts of HFO-1234yf, which is quickly and almost completely transformed to the persistent and phytotoxic trifluoroacetic acid (TFA), is of great concern. Here, we used the nested-grid chemical transport model, GEOS-Chem, to assess the fate and environmental impacts of HFO-1234yf emissions from mobile air conditioners in East Asia. With total emissions of 30.3 Gg yr-1, the annual mean concentrations of HFO-1234yf in China, Japan, and South Korea were 4.00, 3.23, and 5.54 pptv (parts per trillion volume), respectively, and the annual deposition fluxes (dry plus wet) of TFA in these regions were 0.35, 0.48, and 0.53 kg km-2 yr-1, dominated by wet deposition. About 14 %, 13 % and 11 % of HFO-1234yf emissions were deposited as TFA in China, Japan and South Korea, respectively, i.e. a large portion of TFA was deposited in areas outside of the emission boundary regions. The TFA characteristics in Japan and South Korea was significantly influenced by emission from China, which contributions ranged from 43 % to 94 % for the TFA concentrations and 44 % to 98 % for the TFA depositions across the four seasons. This suggests that the influence of neighboring emission sources cannot be ignored when assessing the impact of HFO-1234yf emissions in individual countries.
RESUMO
Purpose: Type 2 diabetes mellitus (T2DM) is associated with reduced insulin uptake and glucose metabolic capacity. Potentilla discolor Bunge (PDB) has been used to treat T2DM; however, the fundamental biological mechanisms remain unclear. This study aimed to understand the active ingredients, potential targets, and underlying mechanisms through which PDB treats T2DM. Methods: Components and action targets were predicted using network pharmacology and molecular docking analyses. PDB extracts were prepared and validated through pharmacological intervention in a Cg>InRK1409A diabetes Drosophila model. Network pharmacology and molecular docking analyses were used to identify the key components and core targets of PDB in the treatment of T2DM, which were subsequently verified in animal experiments. Results: Network pharmacology analysis revealed five effective compounds made up of 107 T2DM-related therapeutic targets and seven protein-protein interaction network core molecules. Molecular docking results showed that quercetin has a strong preference for interleukin-1 beta (IL1B), IL6, RAC-alpha serine/threonine-protein kinase 1 (AKT1), and cellular tumor antigen p53; kaempferol exhibited superior binding to tumor necrosis factor and AKT1; ß-sitosterol demonstrated pronounced binding to Caspase-3 (CASP3). High-performance liquid chromatography data quantified quercetin, kaempferol, and ß-sitosterol at proportions of 0.030%, 0.025%, and 0.076%, respectively. The animal experiments revealed that PDB had no effect on the development, viability, or fertility of Drosophila and it ameliorated glycolipid metabolism disorders in the diabetes Cg>InRK1409A fly. Furthermore, PDB improved the body size and weight of Drosophila, suggesting its potential to alleviate insulin resistance. Moreover, PDB improved Akt phosphorylation and suppressed CASP3 activity to improve insulin resistance in Drosophila with T2DM. Conclusion: Our findings suggest that PDB ameliorates diabetes metabolism disorders in the fly model by enhancing Akt activity and suppressing CASP3 expression. This will facilitate the development of key drug targets and a potential therapeutic strategy for the clinical treatment of T2DM and related metabolic diseases.
Assuntos
Diabetes Mellitus Tipo 2 , Resistência à Insulina , Potentilla , Animais , Diabetes Mellitus Tipo 2/tratamento farmacológico , Caspase 3 , Quempferóis , Drosophila , Simulação de Acoplamento Molecular , Farmacologia em Rede , Proteínas Proto-Oncogênicas c-akt , QuercetinaRESUMO
Out-of-hospital cardiac arrest is a major public health problem worldwide due to its high burden and poor outcomes. Despite progress in treatment, patient outcomes remain unsatisfactory, particularly in low-resource settings. The establishment of a registry is the first step towards gaining a comprehensive understanding of prevailing local conditions and identifying potential opportunities for improving patient survival. Here, we provide a narrative review of the BASeline Investigation of Out-of-hospital Cardiac Arrest (BASIC-OHCA), the first national OHCA registry in China, to introduce its development history, current state, challenges and future directions. We aim to enhance cross-cultural understanding by providing insights from China, while also serving as a reference for the implementation of large-scale registries in low-resource settings.