Artificial Light-Harvesting System Based on Zinc Porphyrin and Benzimidazole: Construction, Resonance Energy Transfer, and Amplification Strategy for Electrochemiluminescence.

Constructing robust and efficient luminophores is of significant importance in the development of electrochemiluminescence (ECL) amplification strategies. Inspired by the resonance energy transfer in natural light-harvesting systems, we propose a novel ECL amplification system based on ECL resonance energy transfer (ECL-RET), which integrates two luminophores, benzimidazole (BIM) and zinc(II) tetrakis(4-carboxyphenyl)porphine (ZnTCPP), into one framework. Through disassembling and reconstruction processes, numerous BIM surround ZnTCPP in the constructed ZIF-9-ZnTCPP. Combined with the overlapped spectra between the emission of BIM and the absorption of ZnTCPP, the energy of multiple BIM (donor) can be concentrated to a single ZnTCPP (acceptor) to amplify the ECL emission of the acceptor. This work provides a convenient way to design an efficient ECL-RET system, which initiates a brand-new chapter in the development of ECL amplification strategies.

Post-synthetic modification-driven ZIF reconstruction and functionalization for efficient SARS-CoV-2 ECL detection.

The emergence of novel pathogens, as well as their frequent variants, raises the significance of developing superior and versatile sensing materials and techniques. Herein, a post-modified zeolitic imidazolate framework (pm-ZIF) was synthesized by using ZIF-67 as a parent MOF, and zinc(II) meso-tetra (4-carboxyphenyl) porphine (ZnTCPP) as a successive exchange ligand. Due to the preservation of the tetrahedral Co-N4 units from the ZIF precursor and the introduced porphyrin luminophores, this hybrid material pm-ZIF/P(Zn) enables the linear electrochemiluminescence (ECL) signal conversion of the target DNA concentration. An efficient biosensor that can be used to quantitatively detect SARS-CoV-2 was therefore constructed. The linear range of the sensor was 10-12-10-8 M, with a limit of detection (LOD) reaching 158 pM. Compared with the traditional amplification-based methods, the duration time of our method is significantly shortened and the quantitation of the SARS-Cov-2 RdRp gene can be completed within twenty minutes at room temperature.

Rational Design of a Highly Dispersed Fe-N-C Nanosheet with 1,10-Phenanthroline-2,9-Dicarboxylic Acid as a Preorganized Ligand: Boosted Electrochemiluminescence Detection of Tetracycline.

In view of the shortcomings of the current coreactant electrochemiluminescence (ECL) and inspired by natural oxygen (O2) reduction metalloenzymes, a novel ECL amplification strategy was established. A pyrolytic iron- and nitrogen-doped (Fe-N-C) nanosheet rich in singly ionized oxygen vacancy (VO•) defects was rationally designed by destroying the highly saturated coordination with a preorganized ligand 1,10-phenanthroline-2,9-dicarboxylic acid (PDA). Extraordinary catalytic activity for O2 activation was obtained via screening a special pyrolysis temperature using spectroscopic and electrochemical methods. The high-spin ferric centers of highly dispersed FeC nanoclusters and abundant carbon and oxygen vacancy defects fully contributed to the inherent catalytic activity. ECL amplification was achieved by integrating the material with luminol to generate redox-active radicals in situ from dissolved O2 and simultaneously shorten the transferring distance of radicals. Tetracycline (TC), which posed a growing threat to aquatic biodiversity and environmental safety, as a model antibiotic was successfully detected with a detection limit of 3.88 nM (S/N = 3), clarifying a promising application prospect of this new effective ECL amplification strategy in biological analysis and environmental monitoring.

2D Zn-Porphyrin-Based Co(II)-MOF with 2-Methylimidazole Sitting Axially on the Paddle-Wheel Units: An Efficient Electrochemiluminescence Bioassay for SARS-CoV-2.

High electrocatalytic activity with tunable luminescence is crucial for the development of electrochemiluminescence (ECL) luminophores. In this study, a porphyrin-based heterobimetallic 2D metal organic framework (MOF), [(ZnTCPP)Co2(MeIm)] (1), is successfully self-assembled from the zinc(II) tetrakis(4-carboxyphenyl)porphine (ZnTCPP) linker and cobalt(II) ions in the presence of 2-methylimidazole (MeIm) by a facile one-pot reaction in methanol at room temperature. On the basis of the experimental results and the theoretical calculations, the MOF 1 contains paddle-wheel [Co2(-CO2)4] secondary building units (SBUs) axially coordinated by a MeIm ligand, which is very beneficial to the electron transfer between the Co(II) ions and oxygen. Combining the photosensitizers ZnTCPP and the electroactive [Co2(-CO2)4] SBUs, the 2D MOF 1 possesses an excellent ECL performance, and can be used as a novel ECL probe for rapid nonamplified detection of the RdRp gene of SARS-CoV-2 with an extremely low limit of detection (≈30 aM).

Cu(II)-assisted self-assembly of dicyandiamide-derived carbon dots: construction inspired from chemical evolution and its H2O2 sensing application.

In the rapid development of artificial nanomaterials comparable to biological enzymes, we propose herein a novel concept for the construction of functional materials inspired from chemical evolution. To mimic the formation process of the catalytic system for the origin of life, dicyandiamide (DCD) was used as an elemental molecule for the de novo synthesis of an electrocatalyst. DCD was initially condensed with glucose (Glu) to form carbon dots (CDs) via a hydrothermal method. The self-assembly of the DCD-derived CDs was then modulated by introducing copper ions and a controlled pyrolysis process. Carbonization of the self-organized DCD-CDs/Cu at 300 °C in air produced the resultant catalyst (DCD-CDs/Cu-300) with the crystalline properties of a transitional state from an organic to inorganic matter, possessing a well-tuned chemical composition and the enhanced electrochemical signal of H2O2 reduction. Therefore, the DCD-CDs/Cu-300 modified electrode provides satisfactory analytical performance for trace H2O2 quantification with a wider linear range (1.0 × 10-7 to 1.4 × 10-3 M) and low detection limit (6.4 × 10-8 M, S/N = 3). This facile electrocatalyst construction strategy inspired from chemical evolution is expected to pave the way to form a more unified paradigm by integrating nanotechnology.

Postmodulation of the Metal-Organic Framework Precursor toward the Vacancy-Rich CuxO Transducer for Sensitivity Boost: Synthesis, Catalysis, and H2O2 Sensing.

Metal-organic frameworks (MOFs) act as versatile coordinators for the subsequent synthesis of high-performance catalysts by providing dispersed metal-ion distribution, initial coordination condition, dopant atom ratios, and so on. In this work, a crystalline MOF trans-[Cu(NO3)2(Him)4] was synthesized as the novel precursor of a redox-alternating CuxO electrochemical catalyst. Through simple temperature modulation, the gradual transformation toward a highly active nanocomposite was characterized to ascertain the signal enhancing mechanism in H2O2 reduction. Owing to the proprietary structure of the transducer material and its ensuing high activity, a proof-of-principle sensor was able to provide an amplified sensitivity of 2330 µA mM-1 cm-2. The facile one-pot preparation and intrinsic nonenzymatic nature also suggests its wide potentials in medical settings.

Multi-tailoring of a modified MOF-derived CuxO electrochemical transducer for enhanced hydrogen peroxide sensing.

Reasonable control of the redox states within the catalytic units together with the interconnection degrees of the substrate is of great significance in the modulation of a well-performing transducer. Herein, a novel carbon black (CB)-modified copper metal-organic framework nanomaterial (CB@Cu-MOF) prepared at room temperature was utilized as a precursor to synthesize mixed-valent copper-oxide composite catalysts (NC/CuxO-T). By tuning the carbonization process of the precursor at different temperatures (T = 100 °C, 200 °C, 300 °C and 400 °C), the different ratio configurations of the redox-alternated CuxO portions were successfully controlled with the simultaneous effective tailoring of the defect abundance in the N-doped carbon substrate. As a result, an optimized NC/CuxO-300 electrochemical H2O2 sensor was able to present a low detection limit (0.26 µM) and decent linear ranges (0.02-1.79 mM and 2.29-9.29 mM). Our strategy using easily available initial materials with mild preparation conditions is expected to promote the practical application of the star materials in laboratories.

Enhanced Electrochemiluminescence of Porphyrin-Based Metal-Organic Frameworks Controlled via Coordination Modulation.

Precise control over the composition, morphology, and size of porphyrin-based metal-organic frameworks is challenging, but the extension of these hybrid materials will enable the creation of novel electrochemiluminescence (ECL) emitters. The coordination of various entities is made from Zn2+ ions and meso-tetra(4-carboxyphenyl)porphine (TCPP), modulated by both solvent and bathophenanthrolinedisulfonic acid disodium salt (BPS) as capping agent, resulting in limited crystal growth of Zn-TCPP in DMF/H2O (v/v, 1:1) and the formation of nanoscale TCPP-Zn-BPS. The role of BPS is also evaluated using Zn-TCPP and BPS-Zn-TCPP as controls, prepared in the absence of BPS and different coordinating sequences of ligands, respectively. The newly obtained TCPP-Zn-BPS exhibits a variety of different morphologies, as well as spectral and optoelectronic properties. The ECL behavior of TCPP-Zn-BPS is investigated by using H2O2 as co-reactant. The amplification of ECL is further studied by ECL spectroscopies and cyclic voltammetry, with the corresponding mechanism proposed.

Zirconium-Based Porphyrinic Metal-Organic Framework (PCN-222): Enhanced Photoelectrochemical Response and Its Application for Label-Free Phosphoprotein Detection.

A simple and rapid photoelectrochemical (PEC) sensor was developed for the label-free detection of a phosphoprotein (α-casein) based on a zirconium based porphyrinic metal-organic framework (MOF), PCN-222, which exhibited an enhanced photocurrent response toward dopamine under the O2-saturated aqueous media. In this work, in terms of PEC measurements and cyclic voltammetry, the PEC behaviors of PCN-222 in aqueous media were thoroughly investigated for the first time. Additionally, in the virtue of the steric hindrance effect from the coordination of the phosphate groups and inorganic Zr-O clusters as binding sites in PCN-222, this biosensor showed high sensitivity for detecting α-casein and the limit of detection (LOD) was estimated to be 0.13 µg mL-1. Moreover, the proposed method provides a promising platform for clinic diagnostic and therapeutics.

The alternative strategy for designing covalent drugs through kinetic effects of pi-stacking on the self-assembled nanoparticles: a model study with antibiotics.

It is still a huge challenge to find a new strategy for rationally designing covalent drugs because most of them are discovered by serendipity. Considering that the effect of covalent drugs is closely associated with the kinetics of the reaction between drug molecule and its target protein, here we first demonstrate an example of the kinetic effect of pi-stacking of drug molecules on covalent antimicrobial drug design. When PEGylated 7-aminocephalosporanic acid (PEG-ACA) is used as a substrate drug, pi-stacking of  the ACA group via the self-assembly of PEG-ACA on the surface of gold nanoparticles (i.e. Au@ACA) exhibits antibacterial activity against E. coli fourfold higher than a PEG-ACA monomer does. The reason can be reasonably attributed to the kinetic rate enhancement for the covalent reaction between Au@ACA and penicillin binding proteins. We believe that the self-assembly of functional groups onto the surface of gold nanoparticles represents a new strategy for covalent drug design.