Effect of polymethyl methacrylate on in situ patterning of perovskite quantum dots by inkjet printing.

The preparation of perovskite quantum dots (PQDs) using an in situ inkjet printing method is beneficial for improving the problems of aggregation and photoluminescence (PL) quenching during long-term storage. However, the stability of PQDs prepared using this method is still not ideal, and the morphology of in situ-printed patterns needs to be optimized. To address these problems, this study introduced polymethyl methacrylate (PMMA) into the process of in situ inkjet printing of PQDs and explored the effect of PMMA on the in situ patterning effect of PQDs. The results showed that using a mixed precursor solution containing a small amount of PMMA as the printing ink can slow down the shrinkage process of ink droplets and improve the uniformity of film formation. As the printing substrate, PMMA provided a suitable high-viscosity environment for the in situ growth of PQDs. This could effectively suppress the coffee ring effect. In addition, the interaction between the C=O=C group in PMMA and metal ion Pb2+ in the CsPbBr3 precursor molecules was favourable to enhancing the density of PQDs. The prepared PMMA-coated CsPbBr3 quantum dots (QDs) pattern had high stability and could maintain at 90.08% PL intensity after 1 week of exposure to air.

Effect of Polyhexamethylene Biguanide in Combination with Undecylenamidopropyl Betaine or PslG on Biofilm Clearance.

Hospital-acquired infection is a great challenge for clinical treatment due to pathogens' biofilm formation and their antibiotic resistance. Here, we investigate the effect of antiseptic agent polyhexamethylene biguanide (PHMB) and undecylenamidopropyl betaine (UB) against biofilms of four pathogens that are often found in hospitals, including Gram-negative bacteria Pseudomonas aeruginosa and Escherichia coli, Gram-positive bacteria Staphylococcus aureus, and pathogenic fungus, Candida albicans. We show that 0.02% PHMB, which is 10-fold lower than the concentration of commercial products, has a strong inhibitory effect on the growth, initial attachment, and biofilm formation of all tested pathogens. PHMB can also disrupt the preformed biofilms of these pathogens. In contrast, 0.1% UB exhibits a mild inhibitory effect on biofilm formation of the four pathogens. This concentration inhibits the growth of S. aureus and C. albicans yet has no growth effect on P. aeruginosa or E. coli. UB only slightly enhances the anti-biofilm efficacy of PHMB on P. aeruginosa biofilms. However, pretreatment with PslG, a glycosyl hydrolase that can efficiently inhibit and disrupt P. aeruginosa biofilm, highly enhances the clearance effect of PHMB on P. aeruginosa biofilms. Meanwhile, PslG can also disassemble the preformed biofilms of the other three pathogens within 30 min to a similar extent as UB treatment for 24 h.

Phosphine-Based Covalent Organic Framework for the Controlled Synthesis of Broad-Scope Ultrafine Nanoparticles.

In this work, a phosphine-based covalent organic framework (Phos-COF-1) is successfully synthesized and employed as a template for the confined growth of broad-scope nanoparticles (NPs). Ascribed to the ordered distribution of phosphine coordination sites in the well-defined pores, various stable and well-dispersed ultrafine metal NPs including Pd, Pt, Au, and bimetallic PdAuNPs with narrow size distributions are successfully prepared as determined by transmission electron microscopy, X-ray photoelectron spectroscopy, inductively coupled plasma, and powder X-ray diffraction analyses. It is also demonstrated that the as-prepared Phos-COF-1-supported ultrafine NPs exhibit excellent catalytic activities and recyclability toward the Suzuki-Miyaura coupling reaction, reduction of nitro-phenol and 1-bromo-4-nitrobenzene, and even tandem coupling and reduction of p-nitroiodobenzene. This work will open many new possibilities for preparing COF-supported ultrafine NPs with good dispersity and stability for a broad range of applications.

[Construction of mono/di-rhamnolipid ratios-manipulable strains and characterization of their corresponding surfactants' activity].

Rhamnolipids (RLs) have emerged as one of the most promising classes of biosurfactants. The ratio of mono-RL to di-RL plays a significant role in determining its performance. Therefore, strains whose production of mono-RL and di-RL are manuplable, have advantage on applications in various scenarios. In this study, we developed a rhlC deletion mutant strain in Pseudomonas aeruginosa PAO1, which produced primarily mono-RL. Subsequently, we generated two complemented strains by integrating the arabinose-induced PBAD-rhlC gene, either directly into the chromosomes or expressing it on plasmids. Our results indicate that the ratio of mono-RL to di-RL synthesized by the complemented strain gradually decreased as the concentration of arabinose (the inducer) increased. Consequently, there was a decrease in emulsification ability and an increase in surface tension and critical micelle concentration (CMC) of the corresponding rhamnolipids. The complemented strains without inducer can produce a small amount of di-rhamnolipids, which enhanced the surfactant properties. Notably, the rhamnolipids induced by 0.10% arabinose exhibited the most potent antibacterial effect.

Dual functions: A coumarin-chalcone conjugate inhibits cyclic-di-GMP and quorum-sensing signaling to reduce biofilm formation and virulence of pathogens.

Antibiotic resistance or tolerance of pathogens is one of the most serious global public health threats. Bacteria in biofilms show extreme tolerance to almost all antibiotic classes. Thus, use of antibiofilm drugs without bacterial-killing effects is one of the strategies to combat antibiotic tolerance. In this study, we discovered a coumarin-chalcone conjugate C9, which can inhibit the biofilm formation of three common pathogens that cause nosocomial infections, namely, Pseudomonas aeruginosa, Staphylococcus aureus, and Escherichia coli, with the best antibiofilm activity against P. aeruginosa. Further investigations indicate that C9 decreases the synthesis of the key biofilm matrix exopolysaccharide Psl and bacterial second messenger cyclic-di-GMP. Meanwhile, C9 can interfere with the regulation of the quorum sensing (QS) system to reduce the virulence of P. aeruginosa. C9 treatment enhances the sensitivity of biofilm to several antibiotics and reduces the survival rate of P. aeruginosa under starvation or oxidative stress conditions, indicating its excellent potential for use as an antibiofilm-forming and anti-QS drug.

Amphiphilic Nano-Swords for Direct Penetration and Eradication of Pathogenic Bacterial Biofilms.

Bacterial biofilms are major causes of persistent and recurrent infections and implant failures. Biofilms are formable by most clinically important pathogens worldwide, such as Staphylococcus aureus, Pseudomonas aeruginosa, and Escherichia coli, causing recalcitrance to standard antibiotic therapy or anti-biofilm strategies due to amphiphilic impermeable extracellular polymeric substances (EPS) and the presence of resistant and persistent bacteria within the biofilm matrix. Herein, we report our design of an oligoamidine-based amphiphilic "nano-sword" with high structural compacity and rigidity. Its rigid, amphiphilic structure ensures effective penetration into EPS, and the membrane-DNA dual-targeting mechanism exerts strong bactericidal effect on the dormant bacterial persisters within biofilms. The potency of this oligoamidine is shown in two distinct modes of application: it may be used as a coating agent for polycaprolactone to fully inhibit surface biofilm growth in an implant-site mimicking micro-environment; meanwhile, it cures model mice of biofilm infections in various ex vivo and in vivo studies.

Integrated Comparative Genomic Analysis and Phenotypic Profiling of Pseudomonas aeruginosa Isolates From Crude Oil.

Pseudomonas aeruginosa is an environmental microorganism that can thrive in diverse ecological niches including plants, animals, water, soil, and crude oil. It also one of the microorganism widely used in tertiary recovery of crude oil and bioremediation. However, the genomic information regarding the mechanisms of survival and adapation of this bacterium in crude oil is still limited. In this study, three Pseudomonads strains (named as IMP66, IMP67, and IMP68) isolated from crude oil were taken for whole-genome sequencing by using a hybridized PacBio and Illumina approach. The phylogeny analysis showed that the three strains were all P. aeruginosa species and clustered in clade 1, the group with PAO1 as a representitive. Subsequent comparative genomic analysis revealed a high degree of individual genomic plasticity, with a probable alkane degradation genomic island, one type I-F CRISPR-Cas system and several prophages integrated into their genomes. Nine genes encoding alkane hydroxylases (AHs) homologs were found in each strain, which might enable these strains to degrade alkane in crude oil. P. aeruginosa can produce rhamnolipids (RLs) biosurfactant to emulsify oil, which enables their survival in crude oil enviroments. Our previous report showed that IMP67 and IMP68 were high RLs producers, while IMP66 produced little RLs. Genomic analysis suggested that their RLs yield was not likely due to differences at genetic level. We then further analyzed the quorum sensing (QS) signal molecules that regulate RLs synthesis. IMP67 and IMP68 produced more N-acyl-homoserine lactones (AHLs) signal molecules than that of PAO1 and IMP66, which could explain their high RLs yield. This study provides evidence for adaptation of P. aeruginosa in crude oil and proposes the potential application of IMP67 and IMP68 in microbial-enhanced oil recovery and bioremediation.