Liquid-embedded (bio)printing of alginate-free, standalone, ultrafine, and ultrathin-walled cannular structures.

While there has been considerable success in the three-dimensional bioprinting of relatively large standalone filamentous tissues, the fabrication of solid fibers with ultrafine diameters or those cannular featuring ultrathin walls remains a particular challenge. Here, an enabling strategy for (bio)printing of solid and hollow fibers whose size ranges could be facilely adjusted across a broad spectrum, is reported, using an aqueous two-phase embedded (bio)printing approach combined with specially designed cross-linking and extrusion methods. The generation of standalone, alginate-free aqueous architectures using this aqueous two-phase strategy allowed freeform patterning of aqueous bioinks, such as those composed of gelatin methacryloyl, within the immiscible aqueous support bath of poly(ethylene oxide). Our (bio)printing strategy revealed the fabrication of standalone solid or cannular structures with diameters as small as approximately 3 or 40 µm, respectively, and wall thicknesses of hollow conduits down to as thin as <5 µm. With cellular functions also demonstrated, we anticipate the methodology to serve as a platform that may satisfy the needs for the different types of potential biomedical and other applications in the future, especially those pertaining to cannular tissues of ultrasmall diameters and ultrathin walls used toward regenerative medicine and tissue model engineering.

Microstructure-Driven Self-Transport and Convection of Water on Membrane Surface for Ultra-Fast, Highly Sensitive, Low-Cost Lateral-Flow Assays.

Lateral-flow assay (LFA) is one of the most commonly used detection technologies, in which the chromatographic membranes are currently used as the lateral-flow membrane (e.g., nitrocellulose membrane, NC Mem). However, several disadvantages of existing chromatographic membranes limit the performance of LFA, including relatively low flow velocity of sample solution and relatively more residuals of sample on membrane, which increase detection time and detection noise. Herein, a surface structure membrane (SS Mem) is proposed, which enables fast self-transport of water with a convection manner and realizes low residuals of sample on membrane surface after the flow. On SS Mem, the flow velocity of water is 7.1-fold higher, and the residuals of sample are decreased by 60-67%, comparing those in NC Mem. SS Mem is used as lateral-flow membrane to prepare lateral-flow strips of nanogold LFA and fluorescence LFA for rapid detection of SARS CoV-2 nucleocapsid protein. These LFAs require 210 s per detection, with limits of detection of 3.98 pg mL-1 and 53.3 fg mL-1, sensitivity of 96.5%, and specificity of 90%. The results suggest that SS Mem enables ultrafast, highly sensitive lateral-flow immunoassays and shows great potential as a new type of lateral-flow membrane to broaden the application of LFA.

Well-Tailored Norbornene-Based Fluorinated Copolymers toward Modulating Icephobicity and Mechanical Robustness.

Well-tailored construction of icephobic surfaces with mechanical robustness and investigation of the structure-property relationships at the molecular level are highly desirable. Herein, a series of norbornene-based fluorinated polyolefin copolymers (FPOR-x) with varying norbornenyl dodecafluoroheptyl ester (NDFHE) molar fractions (0-100 mol %) were well-designed and fabricated via living ring-opening metathesis polymerization (ROMP) employing NDFHE and norbornenyl pentafluorophenyl ester (NPFPE) as the soft and hard segments, respectively. The mechanical and icephobic properties of the fluorinated copolymers can be regulated by adjusting the soft NDFHE contents. As a result, the well-designed norbornene-based copolymers exhibited a wide range of tunable mechanical properties, including tensile strength ranging from 0.2 to 26.4 MPa, elastic modulus ranging from 0.6 to 593.7 MPa, and breaking elongations ranging from 5718.7% to 3.7%, correlating with the proportion of soft NDFHE content. Furthermore, the synergistic interplay between soft and hard segments, particularly the hardness in the majority and softness in the minority or vice versa, could achieve a significant difference in the local modulus and enhance the propagations of cracks within the three-phase regions (soft regions/hard regions/ice), ultimately leading to a significant reduction in ice shear strength. Notably, FPOR-25% with a tensile strength of 12.0 MPa and an elastic modulus of 227.5 MPa exhibited a remarkably low ice shear strength of 57.7 kPa. This study not only highlights the relationship between the polymer molecular structure and surface icephobic properties but also breaks the limitations of icephobic surfaces with a low modulus.

A low-voltage alternant direct current electroporation chip for ultrafast releasing the genome DNA of Helicobacter pylori bacterium.

Nucleic acid detection, as an important molecular diagnostic method, is widely used in bacterial identification, disease diagnosis. For detecting the nucleic acid of bacteria, the prerequisite is to release nucleic acids inside the bacteria. The common means to release nucleic acids is the chemical method, which involves complex processes, is time-consuming, and remains chemical inhibitors. Compared with chemical methods, electroporation as a physical method has the advantages of easy operation, short-time consumption, and chemical reagents free. However, the current works using electroporation often necessitates high-frequency or high-voltage conditions, entailing bulky power devices. Herein, we propose a low-voltage alternant direct current (LADC) electroporation chip and the corresponding miniature device for ultrafast releasing the genome DNA from Helicobacter pylori (H. pylori) for detection. We connected a micrometer-interdigital electrode in the chip with a 20 V portable battery to make the miniature device. Using this low-voltage device, our chip released genome DNA of H. pylori within only 5 ms, achieving a cell lysis rate of 99.5%. We further combined this chip with a colorimetric loop-mediated isothermal amplification assay to visually detect H. pylori within ~ 25 min at 10 CFU/µL. We detected 11 clinical samples using the chip, and the detection results were consistent with those of the clinical standard. The results indicate that the LADC electroporation chip is useful for ultrafast release of genome DNA from bacteria and is expected to promote the development of nucleic acid detection in POCT and other scenarios.

An Adhesive Bioink toward Biofabrication under Wet Conditions.

Three-dimensional (3D) bioprinting is driving significant innovations in biomedicine over recent years. Under certain scenarios such as in intraoperative bioprinting, the bioinks used should exhibit not only cyto/biocompatibility but also adhesiveness in wet conditions. Herein, an adhesive bioink composed of gelatin methacryloyl, gelatin, methacrylated hyaluronic acid, and skin secretion of Andrias davidianus is designed. The bioink exhibits favorable cohesion to allow faithful extrusion bioprinting in wet conditions, while simultaneously showing good adhesion to a variety of surfaces of different chemical properties, possibly achieved through the diverse bonds presented in the bioink formulation. As such, this bioink is able to fabricate sophisticated planar and volumetric constructs using extrusion bioprinting, where the dexterity is further enhanced using ergonomic handheld bioprinters to realize in situ bioprinting. In vitro experiments reveal that cells maintain high viability; further in vivo studies demonstrate good integration and immediate injury sealing. The characteristics of the bioink indicate its potential widespread utility in extrusion bioprinting and will likely broaden the applications of bioprinting toward situations such as in situ dressing and minimally invasive tissue regeneration.

A near-infrared Fluorescent Probe Based on Dicyanisophorone for the Detection of Zinc Ions (Zn2+) in Water and Living Cells.

As one of the important metal ions, zinc ions (Zn2+) are widely involved in various physiological and pathological processes, and play fundamental roles in neurotransmission, cell metabolism and apoptosis. However, the convenient monitor of Zn2+ in environmental and biological samples remains challenging. In this study, a small molecule dicyanoisophorone-based schiff base incorporating with o-phenylenediamine was synthesized. It can rapidly combine with Zn2+ to emit significant near-infrared fluorescence (maximum emission wavelength: 660 nm), so it can be used as a probe to quantitatively detect Zn2+ in the range of 0-10 µM, with a detection limit as low as 4.8 nM, showing the probe has high sensitivity for Zn2+. And the probe has a fast response time to Zn2+ (less than 30 s) and a large Stoke-shift (179 nm). In addition, the high recovery rates in practical water samples, and the clear fluorescent images in living A549 cells were obtained, which are of great significance for the detection of Zn2+ in the environment and biosystem. Due to its simple operation, good selectivity and anti-interference ability, short detection time and high sensitivity, this probe has great application potential as a fast detection tool for Zn2+ in environmental water and biological samples.

Micropore-Forming Gelatin Methacryloyl (GelMA) Bioink Toolbox 2.0: Designable Tunability and Adaptability for 3D Bioprinting Applications.

It is well-known that tissue engineering scaffolds that feature highly interconnected and size-adjustable micropores are oftentimes desired to promote cellular viability, motility, and functions. Unfortunately, the ability of precise control over the microporous structures within bioinks in a cytocompatible manner for applications in 3D bioprinting is generally lacking, until a method of micropore-forming bioink based on gelatin methacryloyl (GelMA) was reported recently. This bioink took advantage of the unique aqueous two-phase emulsion (ATPE) system, where poly(ethylene oxide) (PEO) droplets are utilized as the porogen. Considering the limitations associated with this very initial demonstration, this article has furthered the understanding of the micropore-forming GelMA bioinks by conducting a systematic investigation into the additional GelMA types (porcine and fish, different methacryloyl-modification degrees) and porogen types (PEO, poly(vinyl alcohol), and dextran), as well as the effects of the porogen concentrations and molecular weights on the properties of the GelMA-based ATPE bioink system. This article exemplifies not only the significantly wider range of micropore sizes achievable and better emulsion stability, but also the improved suitability for both extrusion and digital light processing bioprinting with favorable cellular responses.

Inflammation-induced mammalian target of rapamycin signaling is essential for retina regeneration.

Upon retina injury, Müller glia in the zebrafish retina respond by generating multipotent progenitors to repair the retina. However, the complete mechanisms underlying retina regeneration remain elusive. Here we report inflammation-induced mammalian target of rapamycin (mTOR) signaling in the Müller glia is essential for retina regeneration in adult zebrafish. We show after a stab injury, mTOR is rapidly activated in Müller glia and later Müller glia-derived progenitor cells (MGPCs). Importantly, mTOR is required for Müller glia dedifferentiation, as well as the proliferation of Müller glia and MGPCs. Interestingly, transient mTOR inhibition by rapamycin only reversibly suppresses MGPC proliferation, while its longer suppression by knocking down Raptor significantly inhibits the regeneration of retinal neurons. We further show mTOR promotes retina regeneration by regulating the mRNA expression of key reprogramming factors ascl1a and lin-28a, cell cycle-related genes and critical cytokines. Surprisingly, we identify microglia/macrophage-mediated inflammation as an important upstream regulator of mTOR in the Müller glia and it promotes retina regeneration through mTOR. Our study not only demonstrates the important functions of mTOR but also reveals an interesting link between inflammation and the mTOR signaling during retina regeneration.

Predictive Computed Tomography and Clinical Features for Diagnosis of COVID-19 Pneumonia: Compared With Common Viral Pneumonia.

OBJECTIVE: To determine the predictive computed tomography (CT) and clinical features for diagnosis of COVID-19 pneumonia. METHODS: The CT and clinical data including were analyzed using univariate analysis and multinomial logistic regression, followed by receiver operating characteristic curve analysis. RESULTS: The factors including size of ground grass opacity (GGO), GGO with reticular and/or interlobular septal thickening, vascular enlargement, "tree-in-bud" opacity, centrilobular nodules, and stuffy or runny nose were associated with the 2 groups of viral pneumonia, as determined by univariate analysis (P < 0.05). Only GGO with reticular and/or interlobular septal thickening, centrilobular nodules, and stuffy or runny nose remained independent risk factors in multinomial logistic regression analysis. Receiver operating characteristic curve analysis showed that the area under curve of the obtained logistic regression model was 0.893. CONCLUSION: Computed tomography and clinical features including GGO with reticular and/or interlobular septal thickening, absence of centrilobular nodules, and absence of stuffy or runny nose are potential patients with COVID-19 pneumonia.

CT differential diagnosis of COVID-19 and non-COVID-19 in symptomatic suspects: a practical scoring method.

BACKGROUND: Although typical and atypical CT image findings of COVID-19 are reported in current studies, the CT image features of COVID-19 overlap with those of viral pneumonia and other respiratory diseases. Hence, it is difficult to make an exclusive diagnosis. METHODS: Thirty confirmed cases of COVID-19 and forty-three cases of other aetiology or clinically confirmed non-COVID-19 in a general hospital were included. The clinical data including age, sex, exposure history, laboratory parameters and aetiological diagnosis of all patients were collected. Seven positive signs (posterior part/lower lobe predilection, bilateral involvement, rounded GGO, subpleural bandlike GGO, crazy-paving pattern, peripheral distribution, and GGO +/- consolidation) from significant COVID-19 CT image features and four negative signs (only one lobe involvement, only central distribution, tree-in-bud sign, and bronchial wall thickening) from other non-COVID-19 pneumonia were used. The scoring analysis of CT features was compared between the two groups (COVID-19 and non-COVID-19). RESULTS: Older age, symptoms of diarrhoea, exposure history related to Wuhan, and a lower white blood cell and lymphocyte count were significantly suggestive of COVID-19 rather than non-COVID-19 (p < 0.05). The receiver operating characteristic (ROC) curve of the combined CT image features analysis revealed that the area under the curve (AUC) of the scoring system was 0.854. These cut-off values yielded a sensitivity of 56.67% and a specificity of 95.35% for a score > 4, a sensitivity of 100% and a specificity of 23.26% for a score > 0, and a sensitivity of 86.67% and a specificity of 67.44% for a score >  2. CONCLUSIONS: With a simple and practical scoring system based on CT imaging features, we can make a hierarchical diagnosis of COVID-19 and non-COVID-19 with different management suggestions.

[An improved method for in vivo electroporation of morpholinos into the adult zebrafish retina].

In vivo electroporation of morpholinos (MOs) into the retina of adult zebrafish is an efficient method to study gene function related to retinal disease and regeneration. However, the currently reported methods are complicated with low MO transfer efficiency and high probability to cause collateral damage. The present study was aimed to optimize the existing MO electroporation methods. Two major changes were made to MO electroporation procedure in zebrafish retina. One was to coat the inner side of the electrode with ultrasonic gel. The other was to replace the commonly used round electrode with novel rectangular one. The results showed that the use of ultrasonic gel reduced collateral damage caused by retinal electroporation and simplified the experimental procedure. The rectangular electrode significantly increased transfection efficiency of MO electroporation. In particular, knocking down the expression of Ascl1a in the retina by using our method significantly inhibited the generation of retinal progenitor cells. These results suggest our method is the optimization of the current MO electroporation methods and may be a better alternative for relevant researchers.

Predictive features of CT for risk stratifications in patients with primary gastrointestinal stromal tumour.

PURPOSE: To determine the predictive CT imaging features for risk stratifications in patients with primary gastrointestinal stromal tumours (GISTs). MATERIALS AND METHODS: One hundred and twenty-nine patients with histologically confirmed primary GISTs (diameter >2 cm) were enrolled. CT imaging features were reviewed. Tumour risk stratifications were determined according to the 2008 NIH criteria where GISTs were classified into four categories according to the tumour size, location, mitosis count, and tumour rupture. The association between risk stratifications and CT features was analyzed using univariate analysis, followed by multinomial logistic regression and receiver operating characteristic (ROC) curve analysis. RESULTS: CT imaging features including tumour margin, size, shape, tumour growth pattern, direct organ invasion, necrosis, enlarged vessels feeding or draining the mass (EVFDM), lymphadenopathy, and contrast enhancement pattern were associated with the risk stratifications, as determined by univariate analysis (P < 0.05). Only lesion size, growth pattern and EVFDM remained independent risk factors in multinomial logistic regression analysis (OR = 3.480-100.384). ROC curve analysis showed that the area under curve of the obtained multinomial logistic regression model was 0.806 (95 % CI: 0.727-0.885). CONCLUSION: CT features including lesion size, tumour growth pattern, and EVFDM were predictors of the risk stratifications for GIST. KEY POINTS: • CT features were of predictive value for risk stratification of GISTs. • Tumour size, growth patterns, and EVFDM were risk predictors of GISTs. • Large size, mixed growth pattern, or EVFDM indicated high risk GIST.

New Iridoid Glycosides with Antidepressant Activity Isolated from Cyperus rotundus.

Based on bioactive screening results, two new iridoid glycosides, named rotunduside G (1) and rotunduside H (2), were isolated from the rhizomes of Cyperus rotundus, together with four known ones, negundoside (3), nishindaside (4), isooleuropein (5) and neonuezhenide (6). Their structures were elucidated on the basis of spectroscopic methods and from literature values. In mice models of despair, 1 and 2 showed significant antidepressant activity.

Prognostic CT and MR imaging features in patients with untreated extranodal non-Hodgkin lymphoma of the head and neck region.

OBJECTIVE: To determine the prognostic CT and MR imaging features of extranodal non-Hodgkin lymphoma in the head and neck region. METHODS: The clinical data and CT and MR imaging features of 59 patients with histologically confirmed extranodal non-Hodgkin lymphoma in the head and neck region were retrospectively reviewed. Subjects included 27 male and 32 female patients between 13 and 81 years of age, with a mean age of 60.3 years. The clinical outcomes were categorized according to whether relapse or metastasis occurred within 2 years after therapy. The association between the clinical outcome and radiologic factors including tumour size, margin, shape, local tumour invasiveness, regional lymph node involvement, number of involvement sites, and contrast enhancement patterns was determined using univariate and multiple logistic regression analysis. RESULTS: Radiologic factors including tumour size, margin, shape, and local tumour invasiveness were associated with poor clinical outcomes, as determined by univariate analysis (P < 0.05). Only the lesion margin category (ill-defined) remained an independent risk factor for clinical outcome in multivariate logistic regression analysis, with an OR of 8.14 (P < 0.05). CONCLUSION: Ill-defined margin of the primary lesion was indicative of unfavourable survival outcome for patients with extranodal non-Hodgkin lymphoma of the head and neck region. KEY POINTS: • Tumour size, margin, shape and local tumour invasiveness were prognostically relevant. • Tumour margin was an independent risk factor for clinical outcome. • Ill-defined margin of primary lesion was indicative of unfavourable survival outcome.

Barbed arrow-like structure membrane with ultra-high rectification coefficient enables ultra-fast, highly-sensitive lateral-flow assay of cTnI.

Acute myocardial infarction (AMI) has become a public health disease threatening public life safety due to its high mortality. The lateral-flow assay (LFA) of a typical cardiac biomarker, troponin I (cTnI), is essential for the timely warnings of AMI. However, it is a challenge to achieve an ultra-fast and highly-sensitive assay for cTnI (hs-cTnI) using current LFA, due to the limited performance of chromatographic membranes. Here, we propose a barbed arrow-like structure membrane (BAS Mem), which enables the unidirectional, fast flow and low-residual of liquid. The liquid is rectified through the forces generated by the sidewalls of the barbed arrow-like grooves. The rectification coefficient of liquid flow on BAS Mem is 14.5 (highest to date). Using BAS Mem to replace the conventional chromatographic membrane, we prepare batches of lateral-flow strips and achieve LFA of cTnI within 240 s, with a limit of detection of 1.97 ng mL-1. The lateral-flow strips exhibit a specificity of 100%, a sensitivity of 93.3% in detecting 25 samples of suspected AMI patients. The lateral-flow strips show great performance in providing reliable results for clinical diagnosis, with the potential to provide early warnings for AMI.

Single-cell RNA sequencing reveals the heterogeneity and interactions of immune cells and Müller glia during zebrafish retina regeneration.

ABSTRACT: Inflammation plays a crucial role in the regeneration of fish and avian retinas. However, how inflammation regulates Müller glia (MG) reprogramming remains unclear. Here, we used single-cell RNA sequencing to investigate the cell heterogeneity and interactions of MG and immune cells in the regenerating zebrafish retina. We first showed that two types of quiescent MG (resting MG1 and MG2) reside in the uninjured retina. Following retinal injury, resting MG1 transitioned into an activated state expressing known reprogramming genes, while resting MG2 gave rise to rod progenitors. We further showed that retinal microglia can be categorized into three subtypes (microglia-1, microglia-2, and proliferative) and pseudotime analysis demonstrated dynamic changes in microglial status following retinal injury. Analysis of cell-cell interactions indicated extensive crosstalk between immune cells and MG, with many interactions shared among different immune cell types. Finally, we showed that inflammation activated Jak1-Stat3 signaling in MG, promoting their transition from a resting to an activated state. Our study reveals the cell heterogeneity and crosstalk of immune cells and MG in zebrafish retinal repair, and may provide valuable insights into future mammalian retina regeneration.

A Critical Review on Organic Small Fluorescent Probes for Monitoring Carbon Monoxide in Biology.

Endogenous carbon monoxide (CO) is an important intracellular gas messenger that is intimately involved in many physiological and pathological processes. The abnormal concentration of CO in living organisms can cause many diseases. Therefore, it is of great significance to monitor CO in biological samples. Fluorescent probe technology provides an effective and convenient method for CO monitoring, with the advantages of high selectivity and sensitivity, fast response time and in situ fluorescence imaging in biological tissues, which is favored by the majority of researchers. In this paper, the research progress of CO fluorescent probes since 2018 is reviewed, and the design, detection mechanism and biological application of the related fluorescent probes are summarized. And the relationship between the structure and performance of the probes is discussed. Furthermore, the development trend and application prospect of CO fluorescent probes are prospected.

A dual-functional fluorescent probe based on kaolin nanosheets for the detection and separation of aluminum ions.

Aluminum ions (Al3+) are closely related to environmental protection and human health, thus the detection and separation of Al3+ is of great significance. In this study, a dual-functional fluorescent probe for the detection and separation of Al3+ was successfully developed by grafting fluorophore onto kaolin nanosheets. The probe has the characteristics of good dispersion without the involvement of organic solvents, excellent specificity, the low limit of detection (0.55 µM), and fast response time (10 min). And the recovery rates of Al3+ using this probe are in the range from 93.0% to 101.8%, and the corresponding relative standard deviations are in the range from 3.5% to 5.8%. Besides, it also can remove Al3+ in aqueous solution through adsorption, and the removal rates is in the range from 95.1% to 99.3% when the concentration of the probe is 0.4 mg/mL. The probe combines detection and separation functions, overcomes the defect that single-function materials can only be used for detection or separation, which has important significance and good application value.

The preparation of a complex of insulin-phospholipids and their interaction mechanism.

Subcutaneous injections of insulin remain the standard treatment for insulin-dependent diabetic patients, and noninvasive routes are studied but with little success. One of the reasons is that insulin is a hydrophilic compounds and is difficult to cross the mucosa barrier. In this paper, we developed a novel technique to fabricate the insulin-phospholipids complex by a solvent evaporation method with the aim of improving the lipophilicity of insulin. A systematic study on the preparation conditions of the insulin-phospholipids complex is reported in the present work. The formation mechanism and the physicochemical properties of the complex are studied. The associated efficiency of the phospholipids and insulin can be up to 100% when their mass ratio is 7.5 : 1 or more, and the solubility of the complex is improved more than 40 000 times compared with that of insulin alone in the n-octyl alcohol. The results of the insulin content in the complex and hypoglycemic effects in diabetic mice indicated that insulin was able to withstand the preparation procedure. The stability results showed that the complex was stable for 1 year at -20 °C. The interaction mechanism of this formation is that the peptide bonds of insulin interact with the water-soluble head of phospholipids, forming a reverse micelle-like structure. This novel complex will be of great importance in the drug delivery system for insulin via noninvasive routes. This method is cost effective, scalable, and can be used in many other peptide drugs.

The value of CT features and demographic data in the differential diagnosis of type 2 papillary renal cell carcinoma from fat-poor angiomyolipoma and oncocytoma.

PURPOSES: To determine the CT features and demographic data predictive of type 2 papillary renal cell carcinoma (PRCC) that can help distinguish this neoplasm from fat-poor angiomyolipoma (fpAML) and oncocytoma. METHODS: Fifty-four patients with type 2 PRCC, 48 with fpAML, and 47 with oncocytoma in the kidney from multiple centers were retrospectively reviewed. The demographic data and CT features of type 2 PRCC were analyzed and compared with those of fpAML and oncocytoma by univariate analysis and multiple logistic regression analysis to determine the predictive factors for differential diagnosis. Then, receiver operating characteristic (ROC) curve analysis was performed to further assess the logistic regression model and set the threshold level values of the numerical parameters. RESULTS: Older age (≥ 46.5 years), unenhanced lesion-to-renal cortex attenuation (RLRCA) < 1.21, corticomedullary ratio of lesion to renal cortex net enhancement (RLRCNE) < 0.32, and size ≥ 30.1 mm were independent predictors for distinguishing type 2 PRCC from fpAML (OR 14.155, 8.332, and 57.745, respectively, P < 0.05 for all). The area under the curve (AUC) of the multiple logistic regression model in the ROC curve analysis was 0.970. In the combined evaluation, the four independent predictors had a sensitivity and specificity of 0.896 and 0.889, respectively. A corticomedullary RLRCNE < 0.61, irregular shape, and male sex were independent predictors for the differential diagnosis of type 2 PRCC from oncocytoma (OR 15.714, 12.158, and 6.175, respectively, P < 0.05 for all). In the combined evaluation, the three independent predictors had a sensitivity and specificity of 0.889 and 0.979, respectively. The AUC of the multiple logistic regression model in the ROC curve analysis was 0.964. CONCLUSION: The combined application of CT features and demographic data had good ability in distinguishing type 2 PRCC from fpAML and oncocytoma, respectively.