Synthesis of graphitic ordered macroporous carbon with a three-dimensional interconnected pore structure for electrochemical applications.

In this study, ordered macroporous carbon with a three-dimensional (3D) interconnected pore structure and a graphitic pore wall was prepared by chemical vapor deposition (CVD) of benzene using inverse silica opal as the template. Field-emission scanning electron microscopy, transmission electron microscopy, X-ray diffraction, Raman spectrometry, nitrogen adsorption, and thermogravimetric analysis techniques were used to characterize the carbon samples. The electrochemical properties of the carbon materials as a carbon-based anode for lithium-ion batteries and as a Pt catalyst support for room-temperature methanol electrochemical oxidation were examined. It was observed that the CVD method is a simple route to fabrication of desired carbon nanostructures, affording a carbon with graphitic pore walls and uniform pores. The graphitic nature of the carbon enhances the rate performance and cyclability in lithium-ion batteries. The specific capacity was found to be further improved when SnO(2) nanoparticles were supported on the carbon. The specific activity of Pt catalyst supported on the carbon materials for room-temperature methanol electrochemical oxidation was observed to be higher than that of a commercial Pt catalyst (E-TEK).

Synthesis, characterization and optical properties of ordered macroporous organosilicas.

Ordered macroporous organosilica materials with uniform pore size in the range of 0.2-1.35 [micro sign]m have been fabricated by using self-assembled colloidal crystals as templates, and characterized with SEM, TGA, FTIR, MAS NMR, and optical reflectance spectrometry.

Fabrication of binary colloidal crystals and non-close-packed structures by a sequential self-assembly method.

Binary colloidal films of polystyrene (PS) spheres and silica spheres were fabricated with a sequential growth method using differently sized colloidal particles. In particular, we demonstrate the structures formed by a silica monolayer growing on top of a PS monolayer and a silica multilayer growing on top of a PS monolayer. By removal of the bottom PS layers, non-close-packed hexagonal, pentagonal, and square silica arrays were obtained at the original silica/PS interface. The possible formation mechanism of the non-close-packed structure was discussed, which may be used to explain how 3D colloidal crystals grow on patterned substrates.

Evolution of interparticle capillary forces during drying of colloidal crystals.

Photonic crystals are periodic structures that have the capability to manipulate the photons in the same way as semiconductors do for electrons. The self-assembly strategy that utilizes colloidal crystals as a template to form photonic crystals has received a great deal of recent research interest because it is simple and cost-effective. Experimental studies and theoretical analysis have speculated that capillary forces play a pivotal role in forming the colloidal crystals during the crystal growth process and that particularly during the drying stage the changing of the magnitude of capillary forces is critical to the resultant microstructure. This paper presents a computational analysis of the changing capillary forces, which may throw light on a refined strategy for controlling colloidal crystal growth.

Opal and inverse opal fabricated with a flow-controlled vertical deposition method.

In this work, an improved vertical deposition method, namely, a flow-controlled vertical deposition (FCVD) method, was used to grow colloidal crystals with large spherical colloids in water solvent and to infiltrate the colloidal crystals. Using the FCVD method, latex spheres as large as 2 microm can be fabricated into colloidal crystals in water. In addition, the method works very well for controlling surface morphologies of silica-infiltrated opals. Furthermore, fabrication of colloidal crystal heterostructures was demonstrated.

Inward-growing self-assembly of colloidal crystal films on horizontal substrates.

Colloidal crystal films have been fabricated on solid substrates with a horizontal deposition method. Scanning electron microscope images showed that the colloidal crystal films exhibit ordered face-centered cubic structures in large domains. Optical measurements demonstrated the presence of photonic band gap along the crystallographic [111] direction. The fabrication method described in this paper allows one to rapidly fabricate colloidal crystal films of different thicknesses, which can be controlled by varying colloidal suspension concentration or volume. In addition, the method also works well for growing colloidal crystal films on a hydrophilic solid substrate with a rough surface. Furthermore, the fabrication of colloidal crystal heterostructures has been demonstrated. An inward-growing mechanism responsible for self-assembly of colloidal spheres on horizontal substrates has been proposed to interpret the observed experimental results.