Topotactic Conversion of Titanium-Oxo Clusters to a Stable TOC-Based Metal-Organic Framework with the Selective Adsorption of Cationic Dyes.

Titanium-oxo cluster (TOC)-based metal-organic frameworks (MOFs) have received considerable attention in recent years due to their ability to expand the application of TOCs to fields that require highly stable frameworks. Herein, a new cyclic TOC formulated as [Ti6O6(OiPr)8(TTFTC)(phen)2]2 (1, where TTFTC = tetrathiafulvalene tetracarboxylate and phen = phenanthroline) was crystallographically characterized. TOC 1 takes a rectangular ring structure with two phen-modified Ti6 clusters as the width and two TTFTC ligands as the length. An intracluster ligand-to-ligand (TTF-to-phen) charge transfer in 1 was found for TOCs for the first time. Compound 1 undergoes topotactic conversion to generate stable TOC-MOF P1, in which the rectangular framework in 1 formed by a TOC core and ligands is retained, as verified by comprehensive characterization. P1 shows an efficient and rapid selective adsorption capacity for cationic dyes. The experimental adsorption capacity (qex) of P1 reaches a value of up to 789.2 mg/g at 298 K for the crystal violet dye, which is the highest among those of various adsorbents. The calculated models are first used to reveal the structure-property relationship of the cyclic host to different guest dyes. The results further confirmed the host MOF structure of P1.

Redox-Active Two-Dimensional Tetrathiafulvalene-Copper Metal-Organic Framework with Boosted Electrochemical Performances for Supercapatteries.

Metal-organic frameworks (MOFs) have attracted noticeable attention as promising candidates for electrochemical energy storage. However, the lack of electrical conductivity and the weak stability of most MOFs result in poor electrochemical performances. Here, a tetrathiafulvalene (TTF)-based complex, formulated as [(CuCN)2(TTF(py)4)] (1) (TTF-(py)4 = tetra(4-pyridyl)-TTF), is assembled by in situ generation of coordinated CN- from a nontoxic source. Single-crystal X-ray diffraction analysis reveals that compound 1 possesses a two-dimensional layered planar structure, which is further stacked in parallel to form a three-dimensional supramolecular framework. The planar coordination environment of 1 is the first example of a TTF-based MOF. Attributed to the unique structure and redox TTF ligand, the electrical conductivity of 1 is significantly increased by 5 orders of magnitude upon iodine treatment. The iodine-treated 1 (1-ox) electrode displays typical battery-type behavior through electrochemical characterizations. The supercapattery based on the 1-ox positrode and AC negatrode presents a high specific capacity of 266.5 C g-1 at a specific current of 1 A g-1 with a remarkable specific energy of 62.9 Wh kg-1 at a specific power of 1.1 kW kg-1. The excellent electrochemical performance of 1-ox is one of the best among those reported supercapatteries, demonstrating a new strategy for developing MOF-based electrode materials.

A Convenient Procedure for Preparing BiOX-TiO2 Photoelectrocatalytic Electrodes from a Titanium-Oxo Compound-Modified Carbon Fiber Cloth.

Photoelectrocatalysis (PEC) has shown great advantages in sustainable organic synthesis and wastewater treatment because the PEC process can minimize electron-hole recombination, thereby improving the photocatalytic performance. Here, we report a convenient procedure for preparing immobilized BiOX-TiO2 photoelectrocatalytic electrodes from a titanium-oxo compound (TOC)-modified carbon fiber cloth (CFC). Crystalline TOCs composed of Ti12 cations and bismuth halide anions, [Ti12O14(OiPr)18][Bi3Br11(THF)2] (1) and [Ti12O14(OiPr)18][Bi4I14(THF)2] (2), were grown on CFC. Taking advantage of the easy hydrolysis of the titanium-oxo cation and bismuth halide anion, we could easily transform these CFC-immobilized crystals into BiOX-TiO2/CFC (X = Br or I) photocatalysts, which facilitates recycling of the catalysts. The photocatalytic dye degradation test showed that the efficiency did not decrease obviously after 10 photocatalytic cycles. Using BiOX-TiO2-modified CFC as electrodes, electrocatalysis (EC), photocatalysis (PC), and PEC were examined. PEC showed an attractive synergistic effect of EC and PC. These TOC-modified CFCs would be potential candidates for catalytic electrodes for sustainable wastewater purification.

A Cyclic Titanium-Oxo Cluster with a Tetrathiafulvalene Connector as a Precursor for Highly Efficient Adsorbent of Cationic Dyes.

Titanium-oxo clusters (TOCs) have been studied for applications in catalysis, energy storage and transfer, light emission, and so on; however, use of TOCs for the selective adsorption of dyes has not yet been reported. Herein, a TOC compound formulated as [Ti6O3(OiPr)14(TTFTC)]4 (1, TTFTC = tetrathiafulvalene-tetracarboxylate) was successfully prepared and crystallographically characterized. Compound 1 has a cyclic structure assembled by four Ti6 clusters and four rodlike TTFTC connectors. Red compound 1 self-condenses to form a black polymeric organic-inorganic hybrid material (denoted as B-1), which was characterized by various techniques. B-1 is an amorphous TiO material that is formed by the irregular condensation of 1 by the removal of alkoxyl groups. B-1 exhibits high dye adsorption efficiency toward cationic dyes with a qe value of 651.3 mg/g at 298 K for methylene blue (MB). Moreover, B-1 can be used to selectively remove MB not only from mixed cationic-anionic dye solutions but also from some mixed cationic dyes, which is related to their structures. Kinetic, isotherm, and thermodynamic studies demonstrated that the pseudo-second-order kinetic model and Freundlich model show a good fit to the experimental data. The adsorption process involves an exothermic and entropy decreasing process. In addition, dye-adsorbed B-1 can be further used as a photocurrent-responsive material. The work opens up a new field for the application of TOCs in the selective adsorption and removal of dyes.

Photocurrent and Gelation Properties of Polyphenol-Modified Titanium-Oxo Compounds.

Organic-inorganic hybrid metal-polyphenols as stable structural modules have gained extensive interest due to their diverse applications. However, titanium-oxo compounds (TOCs) with large molecular polyphenols have been less explored, and they were expected to be different from small polyphenols with isolated metal ions. Herein, 4-methyl-esculetin (Mesc), a catechol derivative, was selected to construct three TOCs, namely, [Ti17O24(Mesc)4(OiPr)16] (1), [Ti12O14(OiPr)18][Ti16O14(Mesc)12(OiPr)14] (2), and [Ti3O(Mesc)2(OAc)2(OiPr)4] (3). These compounds were structurally characterized. Photocurrent responses were evaluated using the compound-sensitized TiO2 electrodes. It was found that the current densities of 1-3 electrodes are in the order of 1 ≫ 3 > 2, which relates to the ligand-to-TiO core and ligand-to-ligand charge transfers (LMCT and LLCT, respectively). Density functional theory calculations showed that the lowest band gap of 1 originates from its LLCT. Compound 1 reacted with polyphenol tannin (TA) to form a fully transparent and robust gel (1-TA), and the gelation properties were investigated. Using the gel as a nano-TiO2 fixing agent, solar cell electrodes were prepared by a low-temperature wet method. The photocurrent responsive behavior of the 1-TA/TiO2 electrode was compared with that of the 1-sensitized traditional high-temperature-treated TiO2 electrode. Although the current density of the former is somewhat lower than that of the traditional electrode, the low-temperature wet preparation of the 1-TA/TiO2 electrode is more energy-efficient and sustainable.

Tetrathiafulvalene-Cobalt Metal-Organic Frameworks for Lithium-Ion Batteries with Superb Rate Capability.

Although pristine metal-organic framework (MOF) anodes for lithium-ion batteries (LIBs) show moderate activities and relatively stable cycling, the poor rate capability of the MOF anodes limited their applications in the development of a new generation of energy storage. Herein, the electric active CoII ion is selected to coordinate with redox-active S-rich tetrathiafulvalene (TTF) derivatives to create two TTF-Co-MOFs, formulated as [Co2(py-TTF-py)2(BDC)2]·2DMF·H2O (TTF-Co-MOF 1) and [Co2(py-TTF-py)2(BPDC)2]·3DMF·3H2O (TTF-Co-MOF 2), where py-TTF-py = 2,6-bis(4'-pyridyl)tetrathiafulvalene, H2BDC = terephthalic acid, H2BPDC = biphenyl-4,4'-dicarboxylic acid, and DMF = N,N-dimethylformamide. Crystallographic characterization indicated that the two MOFs possess similar 2-fold-interpenetrating 3D frameworks but with two different pore sizes. The pore-size-dependent performances of the TTF-Co-MOFs were explored to optimize the MOFs as the anode materials for LIBs. TTF-Co-MOF 1 presents a high reversible specific capacity of 1186.6 mAh g-1 at 200 mA g-1 after 287 cycles. The rate capability is greatly enhanced by the introduction of CoII into TTF-based MOFs with specific capacities of 1028.6 mAh g-1 at 5 A g-1 and 966.5 mAh g-1 at 10 A g-1. On the basis of the series analysis of theoretical calculations, electrochemical impedance spectroscopy, and crystal structures, it is found that the CoII metal centers play a bridging role in charge transport within the MOF framework, which is beneficial for the transportation of Li ions. The competitive performances of TTF-Co-MOF 1 are attributed to the synergistic effect of the CoII metal centers and S-rich TTF ligand as well as suitable porosity. The study shed some light for the fabrication of advanced energy storage devices through the rational design of MOF-based anode materials.

Assembly of a Titanium-Oxo Cluster and a Bismuth Iodide Cluster, a Single-Source Precursor of a p-n-Type Photocatalyst.

Titanium oxides and bismuth halides or oxyhalides have been known to be excellent semiconductors with both excellent photocatalytic and photoelectric properties. The design of supersalts assembled by titanium-oxo clusters (TOCs) and bismuth iodide clusters is a hopeful strategy for exploring the chemistry and application of new titanium-oxo clusters. We report herein a series of unusual ionic TOCs with Ti12 oxo cluster cations and bismuth iodide anions, [Ti12O15(OiPr)17]3[Bi3I12] (Bi3), [Ti12O14(OiPr)18][Bi4I14(THF)2] (Bi4), and [Ti12O14(OiPr)18][Ti11BiO14(OiPr)17][Bi6I22] (Bi6). Single-crystal X-ray analysis revealed that the type and charge of the Ti12 clusters varied with the charges of different bismuth iodide clusters. Taking advantage of the easy hydrolysis of the TOCs and BiI clusters in water, we used these supersalt crystals as single-source precursors to prepare a p-n-type BiOI-TiO photocatalyst. The heterojunction materials were carefully characterized by powder X-ray diffraction, scanning electron microscopy, X-ray photoelectron spectroscopy, high-resolution transmission electron microscopy, etc. The synergistic effect of the two components of BiOI and TiO on the photocatalytic degradation of RhB in water is demonstrated. This is a very convenient method for obtaining a p-n-type BiOI-TiO heterojuction photocatalyst by just placing the ground TOC crystals into water.

Mono- and Bismetalphenanthroline-Substituted Ti12 Clusters: Structural Variance and the Effect on Electronic State and Photocurrent Property.

Despite the numerous titanium-oxo clusters (TOCs) which have been reported, the nature of small clusters (nuclearity < 10) as model compounds showed large deviation from that of nanoscale TiO materials. Therefore, theoretical and experimental studies for large TOCs merit more attention. We recently prepared and crystallographically characterized a series of large TOCs: Ti11O15(OiPr)16(Cophen) (1), Ti11O15(OiPr)16(Mnphen) (2), Ti10O14(OEt)16(Mnphen)2 (3), and Ti10O14(OEt)16(Mnphphen)2 (4) (phen = 1,10-phenanthroline, phphen = 4,7-biphenyl-phen). These compounds are derivatives of a Ti12 parent cluster by replacing one or two of the five-coordinated titanium atoms of the Ti12 cluster with a transition metal M, Co(II) and Mn(II), that is chelated by a phen group. The effects of mono- and bis-substituted Mphen on the charge and structure of the clusters are discussed. Theoretical evaluation of the frontier orbitals of the clusters is carried out on the basis of the precisely defined crystal structures. Different from the dye molecule to TiO core charge transfer for the dye-modified TOCs, charge transfer in these clusters is from TiO/TiOM to phen/Mphen. The effects of different metal ions and the number of substituted Mphen moieties on the photocurrent properties are evaluated. The results will be of interest to research on cluster chemistry, especially on the TOC chemistry.

2D Lead Iodide Perovskite with Mercaptan-Containing Amine and Its Exceptional Water Stability.

Two dimensional (2D) hybrid perovskites have attracted a great deal of interest because of their appropriate photovoltaic efficiency and environmental stability. Although some 2D hybrid perovskites with sulfur-containing amines have been reported, the cation having the mercaptan group has not been well explored yet. In this work, cysteamine (Cya, HS(CH2)2NH2), a mercaptan-containing amine, was introduced into 2D hybrid perovskite. Two 2D lead iodides with different structures, (HCya)2PbI4 (1) and (HCya)7Pb4I15 (2), were isolated as a red low-temperature phase and a yellow high-temperature phase, respectively. X-ray single-crystal structural analysis showed that the red phase 1 is a single layered corner-shared perovskite and that the yellow phase 2 is a corner/edge-shared quasi-2D perovskite. A thermo-induced reversible 1 to 2 phase transition was found in this synthetic system. The configuration of HCya cation greatly influences the crystallization equilibrium, generating different structures of the lead halides. The single-crystal structure of 1 is discussed in comparison with that of (HAE)2PbI4 (AE = HO(CH2)2NH2), an analogue of 1. The different effects of OH and SH groups on the 2D frameworks are studied based on their hydrogen bonding properties. More remarkably, although the two perovskites have similar structures, the (HCya)2PbI4 (1) has an intrinsic water stability that is much more stable than (HAE)2PbI4, which should be attributed to the affinity of the SH group with lead on the surface of the lead halide.

Cobalt Metal-Organic Frameworks Incorporating Redox-Active Tetrathiafulvalene Ligand: Structures and Effect of LLCT within the MOF on Photoelectrochemical Properties.

Understanding the effect of charge transfer on the physical properties of metal-organic frameworks (MOFs) is essential for designing multifunctional MOF materials. In this work, three redox-active tetrathiafulvalene (TTF)-based MOFs, formulated as [Co6L6(bpe)6(EtOH)2(MeOH)2(H2O)]n·5nH2O (1), [Co5(µ3-OH)2L4(bpe)2]n (2), and [CoL(bpa)(H2O)]n·2nH2O (3) (L = dimethylthio-tetrathiafulvalene-bicarboxylate, bpe = 1,2-bis(4-pyridyl)ethene, bpa = 1,2-bis(4-pyridyl)ethane), are crystallographically characterized. Complexes 1 and 3 are two-dimensional (2D) coordination polymers, and 2 features an unusual three-dimensional (3D) MOF. The structure of 2 contains a cluster chain constructed from µ2-O bridged pentanuclear cluster subunits, which is first found for 3D MOFs. Complexes 1 and 2 are comprised of the same ligands L and bpe but with different multidimensional configuration, and complexes 1 and 3 have the same 2D layered structures with the same ligand L but with different conjugation ligand bpe/bpa, which provide a good comparison for the structure-property relationship. The charge-transfer (CT) interactions within MOF 1 are stronger than those of 2 due to the closer packing of electron donor (D) L and electron acceptor (A) bpe in 1, and no CT occurs within MOF 3 because of the unconjugated bpa. The order of photocurrent density is 1 > 2 ≫ 3, which is in accordance with that of CT interactions. Further analysis reveals that the CT interactions within the MOF are not beneficial for the supercapacitance which is verified by the highest supercapacitance performance of 3. This work is the first study of the structures and CT effects on the supercapacitance performance.

Eu-phen Bonded Titanium Oxo-Clusters, Precursors for a Facile Preparation of High Luminescent Materials and Films.

Incorporation of Eu complexes into various organic or inorganic matrixes is one of the acceptable strategies to obtain displaying materials having practical applications. In this work, we report a convenient approach to preparing high luminescent organic-inorganic hybrid materials and films from the europium-titanium oxo-clusters (EuTOCs) having photoactive antenna ligands. Three Eu2Ti4 oxo-clusters were synthesized and crystallographically characterized. They are the first reported lanthanide-TOCs coordinated with 1,10-phenanthroline (phen) and 2,2'-bipyridine (bpy) as photoactive ligands, Eu2Ti4O6(phen)2(pa)10 (1) (pa = propionate), Eu2Ti4O6(bpy)2(pa)10 (2), and Eu2Ti4O6(phen)2(MA)10 (3) (MA = methacrylate). Benefitting from the photoactive antenna ligands and the rigid cluster structures, these clusters showed bright red luminescence with quantum yield in the range of 60-80% and long lifetime up to 3.0 ms. Unlike those physically mixed polymeric materials, the MA coordinated compound 3 can be self-polymerized to form a brilliant luminescent film. The film coated slide was used to develop a fluorescence sensor for biomolecule ascorbic acid (AA). The low detection limit and reusable properties suggest great potential for such EuTOC films in real applications.

Hybrid Lead Iodide Perovskites with Mixed Cations of Thiourea and Methylamine, From One Dimension to Three Dimensions.

Hybrid halide perovskites featuring as new materials of high-performance solar cells have attracted great research interest. The temperature-dependent dimensional transition of halide perovskites is a crucial handle in the preparation of perovskite films. Only the small cations of methylammonium (MA) or formamidinium (FA) have been involved for most of the dimensional transition materials. In this work, thiourea (tu) is introduced into hybrid halide materials. A new series of 1D ribbonlike hybrid lead iodides with tu and MA cations are reported that were crystallographically characterized as MAn(Htu)n+1PbnI4n+1 (n = 1-4 denoted as 1-4, respectively; in 1, MA is replaced by tu). The width of the perovskite ribbon increases from one PbI6 octahedron to four corner-fused octahedra. Compounds 2 and 3 can be turned into a black 3D perovskite after annealing. This is an unusual mixed MA-tu hybrid halide perovskite system, in which the tu molecule plays an important role in manipulating the dimensions and their photoconductive properties. Scanning electron microscopy of the blackened sample shows that there are a lot of regular vent holes on the smooth crystal surface with sizes of hundreds of nanometers. The tunable structures and porous crystals might be advantageous in the sense of material modulation.

A Series of Tetrathiafulvalene Bismuth Chlorides: Effects of Oxidation States of Cations on Structures and Electric Properties.

Most large organic cations in the low-dimensional hybrid halide perovskites deteriorate the photoelectric conversion efficiency of the cells. Integrating electronically active organic components into hybrid metal halides is an effective method to improve their photoelectric properties. In this work, a series of compounds obtained by hybridizing redox-active tetrakis(methylthio)tetrathiafulvalene (TMT-TTF) with bismuth chloride, formulated as [TMT-TTF]4[Bi6Cl22] (1 and 1'), [TMT-TTF]3[Bi4Cl16] (2), [TMT-TTF]2[Bi3Cl13] (3), [TMT-TTF]2[Bi2Cl10] (4), and {[TMT-TTF][Bi2Cl8]}n (5), were crystallographically characterized. These hybrids exhibit changeable oxidation states of the TTF moiety. The radical cation TTF•+ exists in 1 and 1', while a mixed-valence TTF•+/TTF2+ appears in 2 that has never been documented in any compounds and the dication TTF2+ exists in 3-5 that has never been introduced into hybrid organic-inorganic materials. The different charged states of the TTF cations lead to various degrees of connectivity of metal chloride anions, which exert a significant effect on the cation-anion arrangement and result in different supramolecular interactions between TMT-TTF and between cations and anions. The changeable oxidation states of the TTF moiety and varying degrees of metal chloride connectivity provide a good comparison among these hybridized bismuth chlorides. The order of conductivity is 2 > 1 > 1' > 3 ≈ 4 ≫ 5, which results from the synergistic effect of different oxidation states, the packing of TMT-TTF cations, and back charge transfer from the Bi-Cl anion to the TMT-TTF cation. Notably, the electrical conductivity and carrier mobility can be modulated with the fact that compound 2 has the highest performances in the dark, while in light, these properties of 1 and 1' are in turn higher than that of 2. The order of the photocurrent densities is in accordance with the increase of carrier mobility under irradiation of light. This work is the first systematic study of hybrid metal halides with various oxidation states of TTFs and presents a clear structure-property relationship and offers a fresh view on the design of new perovskite materials at the molecular level.

A Potential Hybrid Hole-Transport Material Incorporating a Redox-Active Tetrathiafulvalene Derivative with CuSCN.

Inorganic CuSCN and organic tetrathiafulvalene derivatives (TTFs) have been exploited as hole-transport materials (HTM) in hybrid perovskite solar cells. To develop new HTM, we herein report two hybrid materials incorporating redox-active TTFs with CuSCN framework (TTFs-CuSCN). Single-crystal analysis showed that compound [Cu2(py-TTF-py)(SCN)2] (1) is three-dimensional (3D) and compound [Cu(py-TTF-py)(SCN)] (2) is two-dimensional (2D) (py-TTF-py = 2,6-bis(4'-pyridyl)tetrathiafulvalene). There are covalent coordination interactions between CuSCN and py-TTF-py and short S···S contacts between the py-TTF-py ligands for both compounds. Besides, C···S contacts exist between py-TTF-py ligands of the neighboring 2D networks in 2, which facilitate the charge transfer and supply efficient multidimensional pathways for carrier migration. As a result, 2 presented better semiconductor performance in comparison with that of 1. The performance of 2 related to the HTMs could be significantly improved by modulating the electronic state of the TTFs-CuSCN framework via oxidative doping. The iodine-doped 2D material (2-I2) gives the most excellent conductivity and carrier mobility, which might be a potential new HTM.

Water-Soluble Lanthanide-Titanium-Oxo Cluster, a Precursor for Biocompatible Nanomaterial.

Titanium-oxo clusters (TOCs) are attractive as a rapidly growing class of molecular materials due to their use as molecular models and precursors of nano-titanium-oxide. However, most TOCs can only be dissolved in nonaqueous solvents, which largely limits their potential applications in biological or environmental situations. Very few water-soluble TOCs were reported, which can be used directly in aqueous biomedical systems. However, until now, no research studies of such TOCs involved in biomedical fields have been documented. We report here a series of lanthanide-titanium-oxo clusters (LnTOCs) formulated as {H2@[Ln2Ti8(µ3-O)8(µ2-O)4(Ac)16]}3·24CH3CN·23H2O (Ln = Eu(III) 1, Tb(III) 2, and Yb(III) 3). The compounds are easily soluble in water and form a stable solution of the cluster aggregates (LnTOC-a). Therefore, nano-biocompatible TiO materals can be prepared from these LnTOCs just by dissolving them in water. The nanoscale aggregates in water solutions were characterized by SEI-MS, 1H NMR, XPS, IR, and EDS mapping. Using the EuTOC-a solution, excellent fluorescence sensor properties for biomolecule ascorbic acid were found. Furthermore, biocompatibility and fluorescent labeling properties of the EuTOC-a for HeLa cells were evaluated. The results indicated that water-soluble LnTOCs can be used to prepare biocompatible fluorescent Ln-Ti-O nanomaterials.

Molecular Model of Dye Sensitized Titanium Oxides Based on Aryl-Amine Dye Anchored Titanium Oxo Clusters.

Model studies on dye sensitized titanium oxides have attracted wide interest with respect to their importance in understanding photoelectric and photophysical processes. Ligand modified titanium oxo clusters (TOCs) have been considered as the most appropriate models for dye sensitized solar cells (DSSCs) on the basis of their atomically precise structures. However, the ligands used previously in TOC models were seldom the dyes that really applied in DSSCs due to the difficulty with which the crystals of the dye anchored TOCs are obtained. We report herein a series of TOCs with the popularly used arylamine-cyanoacrylate dyes. As the closest model of DSSCs, the TOCs were studied by DFT calculations based on their accurate structural information. They have also been applied to photoelectric conversion evaluation by a solar cell device. Both the theoretical and application results showed that the synergistic effect of intradye molecular charge transfer (ICT) and dye to TiO cluster charge transfer (LMCT) is important in increasing the power conversion efficiency.

Effects of the Ligand Structures on the Photoelectric Activities, a Model Study Based on Titanium-Oxo Clusters Anchored with S-Heterocyclic Ligands.

Titanium oxo clusters (TOCs) have become one of the worldwide hot research topics because they are excellent molecular TiO materials having unique photoactive properties and can been used as models of dye-sensitized solar cells (DSSCs). S-Heterocyclic ligands such as thiophene (Th) and tetrathiafulvalene (TTF) derivatives have been widely used in electronic or photoelectronic devices and solar cells. However, a study of the synthesis and properties of TOCs anchored with Th and TTF derivatives is missing. Herein four such TOCs as single crystals were synthesized and structurally characterized: [Ti3O(OiPr)8(LTh)2] (1), [Ti4O2(OiPr)10(LTTF)2] (2), [Ti6O4(OiPr)10(LTh)2(O3PPh)2] (3), and [Ti6O4(OiPr)10(LTTF)2(O3PPh)2] (4). Charge transfer from the Th or TTF electron donor to the TOC core was evaluated by electronic spectra and theoretical calculations. This work first systematically investigated the photoelectrochemistry of TOCs with different conjugated S-heterocyclic ligands in molecular levels. The photocurrent densities of these cluster-modified TiO2 electrodes were examined using DSSCs, which were well responsive to irradiation. The photocurrents of TTF cluster-modified electrodes are higher than those of the Th cluster-modified electrodes because of the sulfur-rich conjugated system.

Perfect Self-Assembling of One-Dimensional Lead Iodides with Tetrahedral Cu4I6S4 Clusters: A High-Symmetry Cubic Packing.

Hybrid perovskites are attractive for their applications in photovoltaic devices. We synthesized a novel 1-D hybrid lead iodide, (tu)2Cu2PbI4, in which 1-D PbI3 chains are tetrahedrally orientated to form a crystal lattice with high-symmetry cubic space group Ia3̅ d (No. 230). Optoelectronic and fluorescence properties are studied.

Intracation and Interanion-Cation Charge-Transfer Properties of Tetrathiafulvalene-Bismuth-Halide Hybrids.

Tetrathiafulvalene (TTF) derivatives as promising hole transport materials in assembling hybrid halide perovskite solar cells have attracted great attention; however, electron transfer or charge-transfer (CT) between TTF and metal halides has been studied with less detail at the molecular level. Using molecular models, we herein report four new TTF-bismuth-halides assembled by methylated or protonated bis(4'-pyridyl)-tetrathiafulvalene cations, (MePy)2TTF or (HPy)2TTF, and bismuth-halide anions. Single crystal analysis showed that the cations are stacked to form a TTF column, and the bismuth-halide anions are inlaid between the TTF columns with anion-cation interactions. In these compounds, the main contribution to CT is the intracation CT, namely intramolecular CT (IMCT) from TTF moiety to pyridinium group. However, the anion to cation CT (ACCT) has a significant effect on the IMCT and physical properties. The different anion-cation interaction modes result in different synergistic effects of IMCT and ACCT, which modified the band gaps and photocurrent properties of the hybrids. The research gives a clear image of structure-property relationship and provides a perspective on the design of new perovskite materials at the molecular level.

Fluorescent Hydrogel Generated Conveniently from a Perylene Tetracarboxylate Derivative of Titanium(IV) Alkoxide.

Organic gelators and metal-coordination frameworks based on perylene derivatives as functional materials have attracted great attention because of their intense fluorescence emission as well as unique electronic and photonic properties. We report here the structures and properties of a luminescent titanium(IV) coordination compound of a perylene tetracarboxylate (PTC) derivative, [Ti2(OiPr)6(L1)(phen)2] (1), along with its two naphthalene analogues, [Ti2(OiPr)6(L2)(phen)2] (2) and [Ti2(OiPr)6(L2)(bpy)2] (3), where L1 = 3,9-dicarboxylate-(4,10-diisopropanolcarboxylate)perylene, phen = 1,10-phenanthroline, L2 = 1,5-dicarboxylate-(2,6-diisopropanolcarboxylate)naphthalene, and bpy = 2,2'-bipyridine. Compound 1 is a rare early-transition-metal PTC coordination compound that can be simply prepared in one pot as crystals by a low-heat synthesis. Unlike those of paramagnetic late-transition-metal PTC compounds, compound 1 showed intense fluorescence emission. More remarkably, the crystals of 1 can be turned immediately to a fluorescent hydrogel just through a simple procedure, putting the crystals in water and then treating with ultrasound. No acid catalyst or pH adjustment is needed. Hydrolysis of the titanium isopropanol group in water and π-π interaction of the perylene and phen play important roles in the gelation process. The film prepared from the gel can be used as a visual fluorescence sensor for aromatic amines and phenols, which are hazards for the human and environment.