Revealing Lithium Nitrate-Mediated Solid-Electrolyte Interphase of Lithium Metal Anode via Cryogenic Transmission Electron Microscopy.

The cycle stability of lithium metal anode (LMA) largely depends on solid-electrolyte interphase (SEI). Electrolyte engineering is a common strategy to adjust SEI properties, yet understanding its impact is challenging due to limited knowledge on ultrafine SEI structures. Herein, using cryogenic transmission electron microscopy, we reveal the atomic-level SEI structure of LMA in ether-based electrolytes, focusing on the role of LiNO3 additives in SEI modulation at different temperature (25 and 50 °C). Poor cycle stability of LMA in the baseline electrolyte without LiNO3 additives stems from the Li2CO3-rich mosaic-type SEI. Increased LiNO3 content and elevated operating temperature enhance cyclic performance by forming bilayer or multilayer SEI structures via preferential LiNO3 decomposition, but may thicken the SEI, leading to reduced initial Coulombic efficiency and increased overpotential. The optimal SEI features a multilayer structure with Li2O-rich inner layer and closely packed grains in the outer layer, minimizing electrolyte decomposition or corrosion.

Amorphous Oxyhalide Matters for Achieving Lithium Superionic Conduction.

The recently surged halide-based solid electrolytes (SEs) are great candidates for high-performance all-solid-state batteries (ASSBs), due to their decent ionic conductivity, wide electrochemical stability window, and good compatibility with high-voltage oxide cathodes. In contrast to the crystalline phases in halide SEs, amorphous components are rarely understood but play an important role in Li-ion conduction. Here, we reveal that the presence of amorphous component is common in halide-based SEs that are prepared via mechanochemical method. The fast Li-ion migration is found to be associated with the local chemistry of the amorphous proportion. Taking Zr-based halide SEs as an example, the amorphization process can be regulated by incorporating O, resulting in the formation of corner-sharing Zr-O/Cl polyhedrons. This structural configuration has been confirmed through X-ray absorption spectroscopy, pair distribution function analyses, and Reverse Monte Carlo modeling. The unique structure significantly reduces the energy barriers for Li-ion transport. As a result, an enhanced ionic conductivity of (1.35 ± 0.07) × 10-3 S cm-1 at 25 °C can be achieved for amorphous Li3ZrCl4O1.5. In addition to the improved ionic conductivity, amorphization of Zr-based halide SEs via incorporation of O leads to good mechanical deformability and promising electrochemical performance. These findings provide deep insights into the rational design of desirable halide SEs for high-performance ASSBs.

Sub-3 nm Pt@Ru toward Outstanding Hydrogen Oxidation Reaction Performance in Alkaline Media.

Anion-exchange membrane fuel cells (AEMFCs) are promising alternative hydrogen conversion devices. However, the sluggish kinetics of the hydrogen oxidation reaction in alkaline media hinders further development of AEMFCs. As a synthesis method commonly used to prepare disordered PtRu alloys, the impregnation process is ingeniously designed herein to synthesize sub-3 nm Pt@Ru core-shell nanoparticles by sequentially reducing Pt and Ru at different annealing temperatures. This method avoids complex procedures and synthesis conditions for organic synthesis systems, and the atomic structure evolution of the synthesized core-shell nanoparticles can be tracked. The synthesized Pt@Ru electrocatalyst shows an ultrasmall average size of ∼2.5 nm and thereby a large electrochemical surface area (ECSA) of 166.66 m2 gPt+Ru-1. Exchange current densities (j0) normalized to the mass (Pt + Ru) and ECSA of this electrocatalyst are 8.0 and 5.8 times as high as those of commercial Pt/C, respectively. To the best of our knowledge, the achieved mass-normalized j0 measured by rotating disk electrodes is the highest reported so far. The membrane electrode assembly test of the Pt@Ru electrocatalyst shows a peak power density of 1.78 W cm-2 (0.152 mgPt+Ru cmanode-2), which is higher than that of commercial PtRu/C (1.62 W cm-2, 0.211 mgPt+Ru cmanode-2). The improvement of the intrinsic activity can be attributed to the electron transfer from the Ru shell to the Pt core, and the ultrafine particles further enhance the mass activity. This work reveals the feasibility of using simple impregnation to synthesize fine core-shell nanocatalysts and the importance of investigating the atomic structure of PtRu nanoparticles and other disordered alloys.

Revealing Structural Insights of Solid Electrolyte Interphase in High-Concentrated Non-Flammable Electrolyte for Li Metal Batteries by Cryo-TEM.

High-concentrated non-flammable electrolytes (HCNFE) in lithium metal batteries prevent thermal runaway accidents, but the microstructure of their solid electrolyte interphase (SEI) remains largely unexplored, due to the lack of direct imaging tools. Herein, cryo-HRTEM is applied to directly visualize the native state of SEI at the atomic scale. In HCNFE, SEI has a uniform laminated crystalline-amorphous structure that can prevent further reaction between the electrolyte and lithium. The inorganic SEI component, Li2 S2 O7 , is precisely identified by cryo-HRTEM. Density functional theory (DFT) calculations demonstrate that the final Li2 S2 O7 phase has suitable natural transmission channels for Li-ion diffusion and excellent ionic conductivity of 1.2 × 10-5 S cm-1 .

Effects of SARS-CoV-2 vaccine (Vero cells) on disease activity in patients with inflammatory bowel disease in China: a multicenter study.

AIMS: To evaluate the impact of SARS-CoV-2 vaccine on IBD activity. METHODS: Adult IBD patients from five large IBD centers in China were enrolled and followed up for 6 months. Patients were divided into vaccinated and unvaccinated groups according to vaccination status. Demographic and clinical data were collected. RESULTS: A total of 280 individuals (213 UC and 67 CD patients) were enrolled in the study. The unvaccinated and vaccinated groups of UC patients were comparable for basic characteristics, including age (t = - 0.8, p = 0.425), sex (χ2 = 0.980, p = 0.322), course of disease (z = - 0.513, p = 0.608), surgical conditions (χ2 = 1.042, p = 0.838), disease extent (χ2 = 4.853, p = 0.088), or baseline drug therapy (χ2 = 7.784, p = 0.064). In the subgroup of UC patients, there was no association between vaccination and disease activities, according to the medium disease activity scores for two groups: unvaccinated patients having scores (IQR) 1(2.75), 1(2), 1(2), and 1(2) at baseline, 1, 3, and 6 months, respectively, whereas vaccinated patients having scores (IQR) 1(2), 1(2), 1(2), and 1(2). Similar conclusions were also derived in the subgroup of CD patients. There were also no statistically significant differences in age (t = - 1.48, p = 0.144), sex (χ2 = 0.003, p = 0.957), course of disease (z = - 0.074, p = 0.941), surgical conditions (χ2 = 0.613, p = 0.594), localization (χ2 = 6.261, p = 0.199), or baseline drug therapy (χ2 = 5.881, p = 0.114) between 2 groups of CD patients. The medium disease activity scores (IQR) of the unvaccinated group at baseline, 1, 3, and 6 months were 1(4), 1(3), 1(3), and 1(3), respectively, whereas those of vaccinated group were 2.5(3.75), 2.5(3.75), 3(2), and 2(2), respectively. Overall, very few participants in this study described worsening IBD disease activity requiring a change or addition of medication. CONCLUSIONS: SARS-CoV-2 vaccine has no adverse effect on disease activity in IBD population. IBD patients should be recommended to receive SARS-CoV-2 vaccine in time.

Expression of 5-HT Relates to Stem Cell Marker LGR5 in Patients with Gastritis and Gastric Cancer.

BACKGROUND: 5-Hydroxytryptamine (5-HT) and stem cells marker G-protein-coupled receptor 5 (LGR5) are associate with gastrointestinal inflammation and tumorigenesis. But the relationship between 5-HT and LGR5 is unclear. OBJECTIVE: To explore the expression and correlation of 5-HT and LGR5 in gastric mucosa of patients with gastritis and gastric cancer (GC). METHODS: A total of 41 patients with GC and 98 patients with chronic gastritis were included in this study. The expression of TPH1 mRNA, LGR5 mRNA and ß-catenin mRNA in gastric mucosa were explored by Real-time Quantitative polymerase chain reaction (qPCR). 5-HT-positive cells and LGR5-positive cells in gastric mucosa were detected by immunohistochemistry stains. The co-localization of 5-HT and chromogranin A (CgA), 5-HT receptor4 (5-HTR4) and LGR5 were detected by multiplex immunofluorescence. RESULTS: The expression of 5-HT and LGR5 in patients with GC was significantly higher than patients with chronic gastritis (p < 0.05). The positive rate of 5-HT and LGR5 increased sequentially in the patients with non-atrophic gastritis, intestinal metaplasia and GC, which were 18.52%, 35.56% and 75.61% for 5-HT, and 27.78%, 40.91% and 95.12% for LGR5, respectively. The expression of 5-HT and LGR5 was positively correlated in gastritis and GC patients (p < 0.05). Moreover, the expression level of TPH1 mRNA and LGR5 mRNA was also positively correlated in gastritis patients (r = 0.7377, p < 0.001). Besides, 5-HT was partially co-localized with CgA, and 5-HTR4 was co-localized with LGR5 in gastric mucosa. CONCLUSION: The increase of 5-HT synthesis in gastric mucosa may have an impact on LGR5-positive gastric epithelial stem cells.

Na-K Alloy Anode for High-Performance Solid-State Sodium Metal Batteries.

Rechargeable solid-state Na metal batteries (SSNMB) can offer high operational safety and energy density. However, poor solid-solid contact between the electrodes and the electrolyte can dramatically increase interfacial resistance and Na dendrite formation, even at low current rates. Therefore, we developed a carbon-fiber-supported liquid Na-K alloy anode that ensures close anode-electrolyte contact, enabling superior cycle stability and rate capability. We then demonstrated the first cryogenic transmission electron microscopy (cryo-TEM) characterization of an SSNMB, capturing the evolution of solid-electrolyte interphase (SEI) and revealing both crystalline and amorphous phases, which could facilitate ion transport and prevent continuous side reactions. By enhancing contact between the Na-K alloy and solid-state electrolyte, these symmetric cells are capable of cycling for over 800 h without notable increased polarization and enable an unprecedented critical current density (CCD) at 40 mA cm-2. Our liquid Na-K alloy approach offers a promising strategic avenue toward commercial SSNMBs.

Enabling Ultrastable Alkali Metal Anodes by Artificial Solid Electrolyte Interphase Fluorination.

The high specific capacity of alkalic metal (Li, Na, and K) anodes has drawn widespread interest; however, the practical applications of alkalic metal anodes have been hampered by dendrite growth and interfacial instability, resulting in performance deterioration and even safety issues. Here, we describe a simple method for building tunable fluoride-based artificial solid-electrolyte interphase (SEI) from the fluorination reaction of alkali metals with a mild organic fluorinating reagent. Comprehensive characterization by advanced electron microscopes shows that the LiF-based artificial SEI adopts a crystal-glass structure, which enables efficient Li ion transport and improves structural integrity against the volume changes that occur during Li plating/stripping. Compared with bare Li anode, the ones with artificial SEI exhibit decreased voltage hysteresis, enhanced rate capability, and prolonged cycle life. This method is also applied to generate fluoride-based artificial SEI on Na and K metal anodes that brings significant improvement in battery performance.

Catalytic Chemistry Derived Artificial Solid Electrolyte Interphase for Stable Lithium Metal Anodes Working at 20†mA cm-2 and 20†mAh cm-2.

A stable solid electrolyte interphase (SEI) layer is crucial for lithium metal anode (LMA) to survive in long-term cycling. However, chaotic structures and chemical inhomogeneity of natural SEI make LMA suffering from exasperating dendrite growth and severe electrode pulverization, which hinder the practical application of LMAs. Here, we design a catalyst-derived artificial SEI layer with an ordered polyamide-lithium hydroxide (PA-LiOH) bi-phase structure to modulate ion transport and enable dendrite-free Li deposition. The PA-LiOH layer can substantially suppress the volume changes of LMA during Li plating/stripping cycles, as well as alleviate the parasitic reactions between LMA and electrolyte. The optimized LMAs demonstrate excellent stability in Li plating/stripping cycles for over 1000 hours at an ultra-high current density of 20 mA cm-2 in Li||Li symmetric cells. A high coulombic efficiency up to 99.2 % in Li half cells in additive-free electrolytes is achieved even after 500 cycles at a current density of 1 mA cm-2 with a capacity of 1 mAh cm-2 .

Integrated analysis of the faecal metagenome and serum metabolome reveals the role of gut microbiome-associated metabolites in the detection of colorectal cancer and adenoma.

OBJECTIVE: To profile gut microbiome-associated metabolites in serum and investigate whether these metabolites could distinguish individuals with colorectal cancer (CRC) or adenoma from normal healthy individuals. DESIGN: Integrated analysis of untargeted serum metabolomics by liquid chromatography-mass spectrometry and metagenome sequencing of paired faecal samples was applied to identify gut microbiome-associated metabolites with significantly altered abundance in patients with CRC and adenoma. The ability of these metabolites to discriminate between CRC and colorectal adenoma was tested by targeted metabolomic analysis. A model based on gut microbiome-associated metabolites was established and evaluated in an independent validation cohort. RESULTS: In total, 885 serum metabolites were significantly altered in both CRC and adenoma, including eight gut microbiome-associated serum metabolites (GMSM panel) that were reproducibly detected by both targeted and untargeted metabolomics analysis and accurately discriminated CRC and adenoma from normal samples. A GMSM panel-based model to predict CRC and colorectal adenoma yielded an area under the curve (AUC) of 0.98 (95% CI 0.94 to 1.00) in the modelling cohort and an AUC of 0.92 (83.5% sensitivity, 84.9% specificity) in the validation cohort. The GMSM model was significantly superior to the clinical marker carcinoembryonic antigen among samples within the validation cohort (AUC 0.92 vs 0.72) and also showed promising diagnostic accuracy for adenomas (AUC=0.84) and early-stage CRC (AUC=0.93). CONCLUSION: Gut microbiome reprogramming in patients with CRC is associated with alterations of the serum metabolome, and GMSMs have potential applications for CRC and adenoma detection.

Revealing the Intrinsic Atomic Structure and Chemistry of Amorphous LiO2-Containing Products in Li-O2 Batteries Using Cryogenic Electron Microscopy.

Aprotic lithium-oxygen batteries (LOBs) are promising energy storage systems characterized by ultrahigh theoretical energy density. Extensive research has been devoted to this battery technology, yet the detailed operational mechanisms involved, particularly unambiguous identification of various discharge products and their specific distributions, are still unknown or are subjects of controversy. This is partly because of the intrinsic complexity of the battery chemistry but also because of the lack of atomic-level insight into the oxygen electrodes acquired via reliable techniques. In the current study, it is demonstrated that electron beam irradiation could induce crystallization of amorphous discharge products. Cryogenic conditions and a low beam dosage have to be used for reliable transmission electron microscopy (TEM) characterization. High-resolution cryo-TEM and electron energy loss spectroscopy (EELS) analysis of toroidal discharge particles unambiguously identified the discharge products as a dominating amorphous LiO2 phase with only a small amount of nanocrystalline Li2O2 islands dispersed in it. In addition, uniform mixing of carbon-containing byproducts is identified in the discharge particles with cryo-EELS, which leads to a slightly higher charging potential. The discharge products can be reversibly cycled, with no visible residue after full recharge. We believe that the amorphous superoxide dominating discharge particles can lead researchers to reconsider the chemistry of LOBs and pay special attention to exclude beam-induced artifacts in traditional TEM characterizations.

Construction of Glucose-6-Phosphate Dehydrogenase Overexpression Strain of Schizochytrium sp. H016 to Improve Docosahexaenoic Acid Production.

Docosahexaenoic acid (DHA) is an important omega-3 polyunsaturated fatty acid (PUFA) that plays a critical physiological role in human health. Schizochytrium sp. is considered an excellent strain for DHA production, but the synthesis of DHA is limited by the availability of nicotinamide adenine dinucleotide phosphate (NADPH). In this study, the endogenous glucose-6-phosphate dehydrogenase (G6PD) gene was overexpressed in Schizochytrium sp. H016. Results demonstrated that G6PD overexpression increased the availability of NADPH, which ultimately altered the fatty acid profile, resulting in a 1.91-fold increase in DHA yield (8.81 g/L) and increased carbon flux by shifting it from carbohydrate and protein synthesis to lipid production. Thus, G6PD played a vital role in primary metabolism. In addition, G6PD significantly increased DHA content and lipid accumulation by 31.47% and 40.29%, respectively. The fed-batch fermentation experiment results showed that DHA production reached 17.01 g/L in the overexpressing G6PD strain. These results elucidated the beneficial effects of NADPH on the synthesis of PUFA in Schizochytrium sp. H016, which may be a potential target for metabolic engineering. Furthermore, this study provides a promising regulatory strategy for the large-scale production of DHA in Schizochytrium sp.

Clarifying the Roles of Cobalt and Nickel in the Structural Evolution of Layered Cathodes for Sodium-Ion Batteries.

Layered sodium manganese-based oxides are appealing cathode candidates due to their high capacity and cost-effectiveness, yet performance degradation related with unwanted structural evolution still remains a disturbing disadvantage. Herein, atomic resolution STEM (scanning transmission electron microscopy) images of Na-extracted Na2/3NixCo1/3-xMn2/3O2 (x = 0, 1/6, 1/3) are collected and analyzed, to decipher the effect of cobalt and nickel substitution on the structural integrity of layered manganese-based oxides. Cobalt substitution is demonstrated to alleviate the lattice stress and retain the layered structure after sodium removal, and only a local P2-to-O2 phase transition could be identified. By contrast, various types of defects and phase transformation, including rarely reported P2-to-O3, are discovered in the Ni-substituted oxides. The generation of spinel and rock-salt phases is the critical evidence of cation mixing that leads to unrecoverable capacity loss. The interplay of different transition metals is complex, and compositional optimization is encouraged to minimize the effect of the concomitant phase transition.

Electric Polarization Switching on an Atomically Thin Metallic Oxide.

Materials with reduced dimensions have been shown to host a wide variety of exotic properties and novel quantum states that often defy textbook wisdom. Polarization switching and metallic screening are well-known examples of mutually exclusive properties that cannot coexist in bulk solids. Here we report the fabrication of (SrRuO3)1/(BaTiO3)10 superlattices that exhibits reversible polarization switching in an atomically thin metallic layer. A multipronged investigation combining structural analyses, electrical measurements, and first-principles electronic structure calculations unravels the coexistence of two-dimensional (2D) metallicity in the SrRuO3 layer accompanied by the breaking of inversion symmetry, supporting electric polarization along the out-of-plane direction. Such a 2D ferroelectric-like metal paves a novel way to engineer a quantum multistate with unusual coexisting properties, such as ferroelectrics and metals, manipulated by external fields.

Optimizing Hydrogen Binding on Ru Sites with RuCo Alloy Nanosheets for Efficient Alkaline Hydrogen Evolution.

Ruthenium (Ru)-based catalysts, with considerable performance and desirable cost, are becoming highly interesting candidates to replace platinum (Pt) in the alkaline hydrogen evolution reaction (HER). The hydrogen binding at Ru sites (Ru-H) is an important factor limiting the HER activity. Herein, density functional theory (DFT) simulations show that the essence of Ru-H binding energy is the strong interaction between the 4 d z 2 orbital of Ru and the 1s orbital of H. The charge transfer between Ru sites and substrates (Co and Ni) causes the appropriate downward shift of the 4 d z 2 -band center of Ru, which results in a Gibbs free energy of 0.022 eV for H* in the RuCo system, much lower than the 0.133 eV in the pure Ru system. This theoretical prediction has been experimentally confirmed using RuCo alloy-nanosheets (RuCo ANSs). They were prepared via a fast co-precipitation method followed with a mild electrochemical reduction. Structure characterizations reveal that the Ru atoms are embedded into the Co substrate as isolated active sites with a planar symmetric and Z-direction asymmetric coordination structure, obtaining an optimal 4 d z 2 modulated electronic structure. Hydrogen sensor and temperature program desorption (TPD) tests demonstrate the enhanced Ru-H interactions in RuCo ANSs compared to those in pure Ru nanoparticles. As a result, the RuCo ANSs reach an ultra-low overpotential of 10 mV at 10 mA cm-2 and a Tafel slope of 20.6 mV dec-1 in 1 M KOH, outperforming that of the commercial Pt/C. This holistic work provides a new insight to promote alkaline HER by optimizing the metal-H binding energy of active sites.

Ultralow Volume Change of P2-Type Layered Oxide Cathode for Na-Ion Batteries with Controlled Phase Transition by Regulating Distribution of Na.

Most P2-type layered oxides exhibit a large volume change when they are charged into high voltage, and it further leads to bad structural stability. In fact, high voltage is not the reason which causes the irreversible phase transition. There are two internal factors which affect structural evolution: the amount and distribution of Na ions retained in the lattice. Hereon, a series of layered oxides Na2/3 Mnx Nix-1/3 Co4/3-2x O2 (1/3≤x≤2/3) were synthesized. It is observed that different components have different structural evolutions during the charge/discharge processes, and further researches find that the distribution of Na ions in layers is the main factor. By controlling the distribution of Na ions, the phase transition process can be well controlled. As the referential component, P2-Na2/3 Mn1/2 Ni1/6 Co1/3 O2 cathode with uniform distribution of Na ions is cycled at the voltage window of 1.5-4.5 V, which exhibits a volume change as low as 1.9 %. Such a low strain is beneficial for cycling stability. The current work provides a new and effective route to regulate the structural evolution of the promising P2-type layered cathode for sodium ion batteries.

Transition of the Reaction from Three-Phase to Two-Phase by Using a Hybrid Conductor for High-Energy-Density High-Rate Solid-State Li-O2 Batteries.

Solid-state Li-O2 batteries possess the ability to deliver high energy density with enhanced safety. However, designing a highly functional solid-state air electrode is the main bottleneck for its further development. Herein, we adopt a hybrid electronic and ionic conductor to build solid-state air electrode that makes the transition of Li-O2 battery electrochemical mechanism from a three-phase process to a two-phase process. The solid-state Li-O2 battery with this hybrid conductor solid-state air electrode shows decreased interfacial resistance and enhanced reaction kinetics. The Coulombic efficiency of Li-O2 battery is also significantly improved, benefiting from the good contact between discharge products and electrode materials. In situ environmental transmission electron microscopy under oxygen was used to illustrate the reversible deposition and decomposition of discharge products on the surface of this hybrid conductor, visually verifying the two-phase reaction.

Control measures to prevent Coronavirus disease 2019 pandemic in endoscopy centers: Multi-center study.

AIMS: To investigate control measures for COVID-19 pandemic in GIE centers in China. METHODS: This is a retrospective multi-center research, including seven centers. Data collection was from 1 February to 31 March 2020 and the same period in 2019. RESULTS: There were a total of 28 COVID-19 definite cases in these hospitals. Six out of seven GIE centers were arranged to shut down on 1 February, with a mean number of shutdown days of 23.6 ± 5.3. The actual workloads were only 10.3%-62.9% compared to those last year. All centers had a preoperative COVID-19 screening process. Epidemiological questionnaire, temperature taking and QR-code of journey were conducted. Chest CT scan was conducted during the shutdown period and continued in five centers after return to work. Antibody and nucleic acid test were applied in one to three centers. All endoscopists had advanced PPE. Five centers used surgical mask and the rest used N95 mask. Six centers used goggles or face shield. Five centers selected isolation gowns and the rest selected protective suits. The change frequency of these PPE was 4 h. Sterilizing measures were improved in six centers. Five centers utilized ultraviolet and six centers strengthened natural ventilation. Four and six centers used peracetic acid during the period of shutdown and return to work, alone or matched with OPA or acidified water. CONCLUSIONS: Many effective control measures were conducted in GIE centers during the outbreak, including patients' volume limitation, preoperative COVID-19 screening, advanced PPE and disinfection methods.

Enhanced CO2 Electroreduction on Neighboring Zn/Co Monomers by Electronic Effect.

It is of great significance to reveal the detailed mechanism of neighboring effects between monomers, as they could not only affect the intermediate bonding but also change the reaction pathway. This paper describes the electronic effect between neighboring Zn/Co monomers effectively promoting CO2 electroreduction to CO. Zn and Co atoms coordinated on N doped carbon (ZnCoNC) show a CO faradaic efficiency of 93.2 % at -0.5 V versus RHE during a 30-hours test. Extended X-ray absorption fine structure measurements (EXAFS) indicated no direct metal-metal bonding and X-ray absorption near-edge structure (XANES) showed the electronic effect between Zn/Co monomers. In situ attenuated total reflection-infrared spectroscopy (ATR-IR) and density functional theory (DFT) calculations further revealed that the electronic effect between Zn/Co enhanced the *COOH intermediate bonding on Zn sites and thus promoted CO production. This work could act as a promising way to reveal the mechanism of neighboring monomers and to influence catalysis.

Isolated Single-Atom Pd Sites in Intermetallic Nanostructures: High Catalytic Selectivity for Semihydrogenation of Alkynes.

Improving the catalytic selectivity of Pd catalysts is of key importance for various industrial processes and remains a challenge so far. Given the unique properties of single-atom catalysts, isolating contiguous Pd atoms into a single-Pd site with another metal to form intermetallic structures is an effective way to endow Pd with high catalytic selectivity and to stabilize the single site with the intermetallic structures. Based on density functional theory modeling, we demonstrate that the (110) surface of Pm3̅m PdIn with single-atom Pd sites shows high selectivity for semihydrogenation of acetylene, whereas the (111) surface of P4/mmm Pd3In with Pd trimer sites shows low selectivity. This idea has been further validated by experimental results that intermetallic PdIn nanocrystals mainly exposing the (110) surface exhibit much higher selectivity for acetylene hydrogenation than Pd3In nanocrystals mainly exposing the (111) surface (92% vs 21% ethylene selectivity at 90 °C). This work provides insight for rational design of bimetallic metal catalysts with specific catalytic properties.