RESUMO
Conventional transmission pulse oximetry is a noninvasive technique for the continuous monitoring of arterial oxygen saturation (SaO2) from peripheral vascular beds such as the finger tip or earlobe. In this paper we propose to exploit the unique transparency of the ocular media to make reflectance pulse oximetry measurements on the retinal fundus. This technique potentially offers significant advantages over conventional pulse oximetry, primarily the ability to monitor cerebral, as opposed to peripheral, oxygen saturation. We have developed an in vitro system to stimulate the retinal circulation and ocular optics. This system consists of a flexible cuvette located in a model eye and an extracorporeal blood circuit to stimulate arterial blood flow. The system was used to investigate the relationship between SaO2 and the R/IR ratio in reflectance pulse oximetry. To enable in vivo measurements to be made, we also modified a standard haptic contact lens to hold the pulse oximeter probe in front of the pupil. In a preliminary study, the lens was fitted to an awake volunteer and cardiac-synchronous signals were detected by the retinal pulse oximeter.
Assuntos
Oximetria/métodos , Vasos Retinianos/fisiologia , Lentes de Contato , Desenho de Equipamento , Oxigenação por Membrana Extracorpórea/instrumentação , Olho/irrigação sanguínea , Fundo de Olho , Humanos , Modelos Estruturais , Oximetria/instrumentação , Oximetria/estatística & dados numéricosRESUMO
In the paper a pulse oximetry model is developed using an approach which combines both theoretical and empirical modelling. The optical properties of whole blood are measured as a function of cuvette depth by transmission spectrophotometry using red (660 nm) and infra-red (950 nm) light-emitting diodes as light sources. Twersky's theoretical model gives the best fit to the experimental data. A simple theoretical model which takes into account the nonlinear relationship between optical density and cuvette depth is then used to obtain an expression for the R:IR ratio, which relates the measurement of transmission at the two wavelengths. The R:IR ratio is found to be more or less independent of cuvette depth (SD = 0.14 at 100 per cent SaO2). To validate the predictions of the theoretical model, the results of a previous experiment in which the relationship between SaO2 and the R:IR ratio was recorded using a flexible cuvette are used. The experimental values are found to lie within one standard deviation from the theoretical curve relating SaO2 and the R:IR ratio. It is argued that a reasonably accurate model for pulse oximetry which is based on whole blood and not haemoglobin solutions has been developed.
Assuntos
Modelos Cardiovasculares , Oximetria/métodos , Humanos , Matemática , Óptica e Fotônica , Oxigênio/sangue , Fluxo PulsátilRESUMO
Most pulse oximeters automatically alter the intensity of their light-emitting diodes (LEDs) according to the absorption of the finger, toe or earlobe to which they are attached. This paper investigates the effect of changing LED intensity on pulse oximeter accuracy. Our results show that the peak wavelength of a red LED typically increases by 8 nm as its intensity is increased ten-fold. To determine whether this shift introduces a significant error, a simple theoretical model based on the Beer-Lambert law is used. The model predicts that a 10:1 change in LED intensity results in a 2.5% error at 50% arterial oxygen saturation (SpO2). At high saturations (SpO2 greater than or equal to 85%) the model predicts little loss of accuracy and thus any effect due to changes in LED intensity will be apparent only at low saturations.
Assuntos
Modelos Teóricos , Oximetria/instrumentação , Desenho de Equipamento , Hemoglobinas/análise , Humanos , Concentração de Íons de Hidrogênio , Oxigênio/sangue , Valor Preditivo dos Testes , Valores de ReferênciaRESUMO
The effect of a number of physiological parameters on pulse oximetry accuracy has been investigated in an in vitro model. We have found that above 50% saturation, pulse oximeters will not be affected by variations in haematocrit, blood flow rate, tissue blood content and pulse amplitude. At low saturations, however, it is known that the accuracy of pulse oximeters decreases and our in vitro results suggest how this may be corrected.
Assuntos
Modelos Cardiovasculares , Oximetria/métodos , Velocidade do Fluxo Sanguíneo , Hematócrito , Fluxo PulsátilRESUMO
Ambient temperature is known to affect the emission spectrum of a light-emitting diode (LED). This study has investigated the effect of changes in ambient temperature on the emission spectra of two LED with peak emission wavelengths similar to those used in pulse oximetry. There was a 5.5-nm increase in the peak wavelength for a 660-nm LED, and a 7.8-nm increase in the peak wavelength for a 950-nm LED as temperature increased from 0 to 50 degrees C. Using a simple theoretical model based on the Beer-Lambert law, the effect of these shifts in wavelength on pulse oximeter accuracy was examined and found to be negligible over the temperature range studied.