Cu Based Dilute Alloys for Tuning the C2+ Selectivity of Electrochemical CO2 Reduction.

Electrochemical CO2 reduction is a promising technology for replacing fossil fuel feedstocks in the chemical industry but further improvements in catalyst selectivity need to be made. So far, only copper-based catalysts have shown efficient conversion of CO2 into the desired multi-carbon (C2+) products. This work explores Cu-based dilute alloys to systematically tune the energy landscape of CO2 electrolysis toward C2+ products. Selection of the dilute alloy components is guided by grand canonical density functional theory simulations using the calculated binding energies of the reaction intermediates CO*, CHO*, and OCCO* dimer as descriptors for the selectivity toward C2+ products. A physical vapor deposition catalyst testing platform is employed to isolate the effect of alloy composition on the C2+/C1 product branching ratio without interference from catalyst morphology or catalyst integration. Six dilute alloy catalysts are prepared and tested with respect to their C2+/C1 product ratio using different electrolyzer environments including selected tests in a 100-cm2 electrolyzer. Consistent with theory, CuAl, CuB, CuGa and especially CuSc show increased selectivity toward C2+ products by making CO dimerization energetically more favorable on the dominant Cu facets, demonstrating the power of using the dilute alloy approach to tune the selectivity of CO2 electrolysis.

Copper-catalyzed multicomponent reaction of ß-trifluoromethyl ß-diazo esters enabling the synthesis of ß-trifluoromethyl N,N-diacyl-ß-amino esters.

An efficient multicomponent reaction of newly designed ß-trifluoromethyl ß-diazo esters, acetonitrile, and carboxylic acids via an interrupted esterification process under copper-catalyzed conditions has been developed, which affords various unsymmetrical ß-trifluoromethyl N,N-diacyl-ß-amino esters in good to excellent yields. The reaction features mild conditions, a wide scope of ß-amino esters and carboxylic acids, and also applicability to large-scale synthesis, thus providing an efficient way for the synthesis of ß-trifluoromethyl ß-diacylamino esters. Furthermore, this reaction represents the first example of a Mumm rearrangement of ß-trifluoromethyl ß-diazo esters.

Copper-Catalyzed Heterocyclic Recombination of Aziridine and Diazetidine for the Synthesis of Imidazolidine.

The discovery of new catalytic applications for metals remains an important goal in organic synthesis. If a catalyst has multiple functions, such as inducing bond cleavage and formation, it can streamline multi-step transformations. Herein, the Cu-catalyzed synthesis of imidazolidine through heterocyclic recombination between aziridine and diazetidine is reported. Mechanistically, Cu catalyzes the conversion of diazetidine into the corresponding imine, which then reacts with aziridine to form imidazolidine. The scope is sufficiently wide to form various imidazolidines, as many functional groups are compatible with the reaction conditions.

Cu-Catalyzed Polychloromethylamination of Styrenes through C(sp3 )-H Bond Cleavage.

A copper-catalyzed three-component coupling reaction has been developed allowing the rapid building of valuable complex highly functionalized ß-polychloromethyl amines from simple styrenes, arylamines, and dichloromethane/chloroform. Using aryldiazonium salts as a radical initiator, a series of corresponding products are obtained with moderate to good yields under a carbon dioxide or nitrogen atmosphere (50 psi). In addition, good functional group tolerance can be observed.

Sodium Trifluoroacetate mediated Copper-Catalyzed aza-Michael addition of α,ß-unsaturated olefins with aromatic amines.

We present a sodium trifluoroacetate (CF3CO2Na) mediated copper-catalyzed aza-Michael addition of aromatic amines with activated olefins under mild, aqueous reaction conditions. This simplistic protocol employs a copper catalyst (10 mol%) and water as solvent. This transformation occurs precisely with aromatic substituted amines containing both electron-donating (EDG) and electron-withdrawing (EWG) groups. A broad range of substrates were tested under the optimized conditions, which are producing good to moderate yields.

Copper-Catalyzed Aerobic C(sp3)-H Oxidation of ß-(Alkoxy)imino Carbonyl Compounds.

Direct oxidation of the C(sp3)-H bond of ß-(alkoxy)imino carbonyl compounds using copper acetate and molecular oxygen has been established. The protocol features a broad substrate scope and generates 1-imino-2,3-dicarbonyls in good to excellent yields.

Highly Selective and Stable Cu Catalysts Based on Ni-Al Catalytic Systems for Bioethanol Upgrading to n-Butanol.

The catalytic upgrading of ethanol into butanol through the Guerbet coupling reaction has received increasing attention recently due to the sufficient supply of bioethanol and the versatile applications of butanol. In this work, four different supported Cu catalysts, i.e., Cu/Al2O3, Cu/NiO, Cu/Ni3AlOx, and Cu/Ni1AlOx (Ni2+/Al3+ molar ratios of 3 and 1), were applied to investigate the catalytic performances for ethanol conversion. From the results, Ni-containing catalysts exhibit better reactivity; Al-containing catalysts exhibit better stability; but in terms of ethanol conversion, butanol selectivity, and catalyst stability, a corporative effect between Ni-Al catalytic systems can be clearly observed. Combined characterizations such as XRD, TEM, XPS, H2-TPR, and CO2/NH3-TPD were applied to analyze the properties of different catalysts. Based on the results, Cu species provide the active sites for ethanol dehydrogenation/hydrogenation, and the support derived from Ni-Al-LDH supplies appropriate acid-base sites for the aldol condensation, contributing to the high butanol selectivity. In addition, catalysts with strong reducibility (i.e., Cu/NiO) may be easily deconstructed during catalysis, leading to fast deactivation of the catalysts in the Guerbet coupling process.

Copper-Catalyzed Intramolecular Olefinic C(sp2)-H Amidation for the Synthesis of γ-Alkylidene-γ-lactams.

Herein, we report the copper-catalyzed dehydrogenative C(sp2)-N bond formation of 4-pentenamides via nitrogen-centered radicals. This reaction provides a straightforward and efficient preparation method for γ-alkylidene-γ-lactams. Notably, we could controllably synthesize α,ß-unsaturated- or α,ß-saturated-γ-alkylidene-γ-lactams depending on the reaction conditions.

Copper(I)-Catalyzed Conjugate Addition/Enantioselective Protonation with Selenols and α-Substituted α,ß-Unsaturated Thioamides.

Herein, a copper(I)-catalyzed asymmetric conjugate addition/protonation with selenols and α-substituted α,ß-unsaturated thioamides is disclosed, which affords a series of chiral selenides in high to excellent enantioselectivity. As for both selenols and α-substituted α,ß-unsaturated thioamides, the reaction enjoys broad substrate scopes. The present catalytic system is also successfully applied to asymmetric selenation of ß-substituted α,ß-unsaturated thioamides. A [Cu-(R,RP )-TANIAPHOS]-SePh species is characterized by its 77 Se NMR spectra, which gives a chemical shift at δ 462 ppm. Moreover, a {[Cu-(R)-TOL-BINAP]-SePh}2 species is characterized by X-ray analysis, which confirms the formation of Cu-Se bond in the reaction. Finally, the transformations of the thioamide group to amine and thioester are demonstrated to be straightforward.

Favoring CO Intermediate Stabilization and Protonation by Crown Ether for CO2 Electromethanation in Acidic Media.

The large-scale deployment of CO2 electroreduction is hampered by deficient carbon utilization in neutral and alkaline electrolytes due to CO2 loss into (bi)carbonates. Switching to acidic media mitigates carbonation, but suffers from low product selectivity because of hydrogen evolution. Here we report a crown ether decoration strategy on a Cu catalyst to enhance carbon utilization and selectivity of CO2 methanation under acidic conditions. Macrocyclic 18-Crown-6 is found to enrich potassium cations near the Cu electrode surface, simultaneously enhancing the interfacial electric field to stabilize the *CO intermediate and accelerate water dissociation to boost *CO protonation. Remarkably, the mixture of 18-Crown-6 and Cu nanoparticles affords a CH4 Faradaic efficiency of 51.2 % and a single pass carbon efficiency of 43.0 % toward CO2 electroreduction in electrolyte with pH=2. This study provides a facile strategy to promote CH4 selectivity and carbon utilization by modifying Cu catalysts with supramolecules.

Promoting CO2 Electroreduction to Multi-Carbon Products by Hydrophobicity-Induced Electro-Kinetic Retardation.

Advancing the performance of the Cu-catalyzed electrochemical CO2 reduction reaction (CO2 RR) is crucial for its practical applications. Still, the wettable pristine Cu surface often suffers from low exposure to CO2 , reducing the Faradaic efficiencies (FEs) and current densities for multi-carbon (C2+ ) products. Recent studies have proposed that increasing surface availability for CO2 by cation-exchange ionomers can enhance the C2+ product formation rates. However, due to the rapid formation and consumption of *CO, such promotion in reaction kinetics can shorten the residence of *CO whose adsorption determines C2+ selectivity, and thus the resulting C2+ FEs remain low. Herein, we discover that the electro-kinetic retardation caused by the strong hydrophobicity of quaternary ammonium group-functionalized polynorbornene ionomers can greatly prolong the *CO residence on Cu. This unconventional electro-kinetic effect is demonstrated by the increased Tafel slopes and the decreased sensitivity of *CO coverage change to potentials. As a result, the strongly hydrophobic Cu electrodes exhibit C2+ Faradaic efficiencies of ≈90 % at a partial current density of 223 mA cm-2 , more than twice of bare or hydrophilic Cu surfaces.

Synthesis of Unsymmetrical Urea Derivatives via Cu-Catalyzed Reaction of Acylazide and Secondary Amine.

The synthesis of unsymmetrical urea generally requires toxic reagent, solvent and harsh reaction condition. Herein, we introduce Cu-catalyzed greener and safer unsymmetrical urea derivatives synthesis in ethyl acetate. This method minimized utilization of toxic reagent. A variety of indole, amines, and azides with bis-indole successfully employed leading to high yields and gram scale synthesis of isolated urea.

High Catalytic Efficiency of a Nanosized Copper-Based Catalyst for Automotives: A Physicochemical Characterization.

The global trend in restrictions on pollutant emissions requires the use of catalytic converters in the automotive industry. Noble metals belonging to the platinum group metals (PGMs, platinum, palladium, and rhodium) are currently used for autocatalysts. However, recent efforts focus on the development of new catalytic converters that combine high activity and reduced cost, attracting the interest of the automotive industry. Among them, the partial substitution of PGMs by abundant non-PGMs (transition metals such as copper) seems to be a promising alternative. The PROMETHEUS catalyst (PROM100) is a polymetallic nanosized copper-based catalyst for automotives prepared by a wet impregnation method, using as a carrier an inorganic mixed oxide (CeO2-ZrO2) exhibiting elevated oxygen storage capacity. On the other hand, catalyst deactivation or ageing is defined as the process in which the structure and state of the catalyst change, leading to the loss of the catalyst's active sites with a subsequent decrease in the catalyst's performance, significantly affecting the emissions of the catalyst. The main scope of this research is to investigate in detail the effect of ageing on this low-cost, effective catalyst. To that end, a detailed characterization has been performed with a train of methods, such as SEM, Raman, XRD, XRF, BET and XPS, to both ceria-zirconia mixed inorganic oxide support (CZ-fresh and -aged) and to the copper-based catalyst (PROM100-fresh and -aged), revealing the impact of ageing on catalytic efficiency. It was found that ageing affects the Ce-Zr mixed oxide structure by initiating the formation of distinct ZrO2 and CeO2 structures monitored by Raman and XRD. In addition, it crucially affects the morphology of the sample by reducing the surface area by a factor of nearly two orders of magnitude and increasing particle size as indicated by BET and SEM due to sintering. Finally, the Pd concentration was found to be considerably reduced from the material's surface as suggested by XPS data. The above-mentioned alterations observed after ageing increased the light-off temperatures by more than 175 °C, compared to the fresh sample, without affecting the overall efficiency of the catalyst for CO and CH4 oxidation reactions. Metal particle and CeZr carrier sintering, washcoat loss as well as partial metal encapsulation by Cu and/or CeZrO4 are identified as the main causes for the deactivation after hydrothermal ageing.

Copper-Catalyzed Boroaminomethylation of Olefins to γ-Boryl Amines with CO as C1 Source.

Boroaminomethylation of olefins is an efficient process to convert hydrocarbons directly into boron-, nitrogen-containing molecules. Such chemicals are a good handle for obtaining more complexed amine derivatives through the various transformations of organoboron. However, using simple and easily available CO as the C1 feedstock to achieve boroaminomethylation is still elusive. Here we report a copper-catalyzed boroaminomethylation of olefins with CO as the C1 source via the mechanism of a carbene insertion into the N-H bond. This method affords valuable γ-boryl amines from four inexpensive readily chemicals. The wide synthetic transformations of the γ-boryl amines demonstrates their utility. Notably, 13 C labeling studies revealed that the -CH2 -building block was derived from one molecule of CO.

Synthesis of novel alkynyl imidazopyridinyl selenides: copper-catalyzed tandem selenation of selenium with 2-arylimidazo[1,2-a]pyridines and terminal alkynes.

Alkynyl selenides have attracted considerable research interest recently, owing to their applications in the biological and pharmaceutical fields. The Cu-catalyzed tandem reaction for the synthesis of novel alkynyl imidazopyridinyl selenides is presented. A one-pot synthesis route afforded alkynyl imidazopyridinyl selenides in moderate to good yields. This was achieved by a two-step reaction between terminal alkynes and diimidazopyridinyl diselenides, generated from imidazo[1,2-a]pyridines and Se powder, using 10 mol % of CuI and 1,10-phenanthroline as the catalytic system under aerobic conditions. The C(sp2)-Se and C(sp)-Se bond-formation reaction can be performed in one-pot by using inexpensive and easy to handle Se powder as the Se source. The reaction proceeded with terminal alkynes having various substitutions, such as aryl, vinyl, and alkyl groups. The obtained alkynyl imidazopyridinyl selenide was found to undergo nucleophilic substitution reaction on Se atom using organolithium reagents and 1,3-dipolar azide-alkyne cycloaddition based on the alkyne moiety.

Role of Intermolecular Interactions in the Catalytic Reaction of Formic Acid on Cu(111).

Formic acid (HCOOH) can be catalytically decomposed into H2 and CO2 and is a promising hydrogen storage material. As H2 production catalysts, Cu surfaces allow selective HCOOH decarboxylation; however, the on-surface HCOOH decomposition reaction pathway remains controversial. In this study, the temperature dependence of the HCOOH/Cu(111) adsorption structures is elucidated by scanning tunneling microscopy and non-contact atomic force microscopy, establishing the adsorbate chemical species using density functional theory. 2D HCOOH islands at 80 K, linear chains of HCOOH and monodentate formate at 150 K, chain-like assemblies of monodentate and bidentate formate at 200 K, and bidentate formate clusters at 300 K are observed. At each temperature, the adsorbates experience attractive interactions among themselves. Such aggregation stabilizes them against desorption and decomposition. Thus, accurate evaluation of intermolecular interactions is essential to understand catalytic reactivity.

Synthesis of Carbohydrate Based Macrolactones and Their Applications as Receptors for Ion Recognition and Catalysis.

Glycomacrolactones exhibit many interesting biological properties, and they are also important in molecular recognitions and for supramolecular chemistry. Therefore, it is important to be able to access glycomacrocycles with different sizes and functionality. A new series of carbohydrate-based macrocycles containing triazole and lactone moieties have been designed and synthesized. The synthesis features an intramolecular nucleophilic substitution reaction for the macrocyclization step. In this article, the effect of some common sulfonate leaving groups is evaluated for macrolactonization. Using tosylate gave good selectivity for monolactonization products with good yields. Fourteen different macrocycles have been synthesized and characterized, of which eleven macrocycles are from cyclization of the C1 to C6 positions of N-acetyl D-glucosamine derivatives and three others from C2 to C6 cyclization of functionalized D-glucosamine derivatives. These novel macrolactones have unique structures and demonstrate interesting anion binding properties, especially for chloride. The macrocycles containing two triazoles form complexes with copper sulfate, and they are effective ligands for copper sulfate mediated azide-alkyne cycloaddition reactions (CuAAC). In addition, several macrocycles show some selectivity for different alkynes.

Design, Microwave-Assisted Synthesis and In Silico Prediction Study of Novel Isoxazole Linked Pyranopyrimidinone Conjugates as New Targets for Searching Potential Anti-SARS-CoV-2 Agents.

A series of novel naphthopyrano[2,3-d]pyrimidin-11(12H)-one containing isoxazole nucleus 4 was synthesized under microwave irradiation and classical conditions in moderate to excellent yields upon 1,3-dipolar cycloaddition reaction using various arylnitrile oxides under copper(I) catalyst. A one-pot, three-component reaction, N-propargylation and Dimroth rearrangement were used as the key steps for the preparation of the dipolarophiles3. The structures of the synthesized compounds were established by 1H NMR, 13C NMR and HRMS-ES means. The present study aims to also predict the theoretical assembly of the COVID-19 protease (SARS-CoV-2 Mpro) and to discover in advance whether this protein can be targeted by the compounds 4a-1 and thus be synthesized. The docking scores of these compounds were compared to those of the co-crystallized native ligand inhibitor (N3) which was used as a reference standard. The results showed that all the synthesized compounds (4a-l) gave interesting binding scores compared to those of N3 inhibitor. It was found that compounds 4a, 4e and 4i achieved greatly similar binding scores and modes of interaction than N3, indicating promising affinity towards SARS-CoV-2 Mpro. On the other hand, the derivatives 4k, 4h and 4j showed binding energy scores (-8.9, -8.5 and -8.4 kcal/mol, respectively) higher than the Mpro N3 inhibitor (-7.0 kcal/mol), revealing, in their turn, a strong interaction with the target protease, although their interactions were not entirely comparable to that of the reference N3.

Catalytic Asymmetric Allylic Substitution with Copper(I) Homoenolates Generated from Cyclopropanols.

By using copper(I) homoenolates as nucleophiles, which are generated through the ring-opening of 1-substituted cyclopropane-1-ols, a catalytic asymmetric allylic substitution with allyl phosphates is achieved in high to excellent yields with high enantioselectivity. Both 1-substituted cyclopropane-1-ols and allylic phosphates enjoy broad substrate scopes. Remarkably, various functional groups, such as ether, ester, tosylate, imide, alcohol, nitro, and carbamate are well tolerated. Moreover, the present method is nicely extended to the asymmetric construction of quaternary carbon centers. Some control experiments argue against a radical-based reaction mechanism and a catalytic cycle based on a two-electron process is proposed. Finally, the synthetic utilities of the product are showcased by means of the transformations of the terminal olefin group and the ketone group.

Catalytic Halogen Exchange in Supplementary Activator and Reducing Agent Atom Transfer Radical Polymerization for the Synthesis of Block Copolymers.

Synthesis of block copolymers (BCPs) by catalytic halogen exchange (cHE) is reported, using supplemental activator and reducing agent Atom Transfer Radical Polymerization (SARA ATRP). The cHE mechanism is based on the use of a small amount of a copper catalyst in the presence of a suitable excess of halide ions, for the synthesis of block copolymers from macroinitiators with monomers of mismatching reactivity. cHE overcomes the problem of inefficient initiation in block copolymerizations in which the second monomer provides dormant species that are more reactive than the initiator. Model macroinitiators with low dispersity are prepared and extended to afford well-defined block copolymers of various compositions. Combined cHE/SARA ATRP is therefore a simple and potent polymerization tool for the copolymerization of a wide range of monomers allowing the production of tailored block copolymers.