RESUMO
BACKGROUND: Melanoma and non-melanoma skin cancer are significant causes of mortality. Previous studies regarding skin cancer education in nonmedical professionals have shown increases in favorable attitudes and likelihood of approaching clients about concerning lesions with training. However, few studies have investigated the use of estheticians in skin cancer screening. OBJECTIVES: The objective of this study was to develop an education course to train estheticians to recognize concerning lesions, to assess the baseline knowledge of estheticians toward skin cancer detection, and to determine the effect that our curriculum has on lesion detection. METHODS: We administered an education course and corresponding cross-sectional surveys to estheticians to evaluate current knowledge and assess for improvements in attitudes and behaviors regarding skin cancer detection. RESULTS: Of 504 estheticians, most estheticians (85-98%) indicated the correct level of concern for "extremely concerning" lesions on pre- and post-training surveys. Estheticians were more likely to recommend that their client see a medical professional if they previously attended a course on skin cancer (p = 0.012) or had greater than 1 year of work experience (p < 0.001). After completion of the training module, most participants felt "very comfortable," suggesting that clients see a doctor for a suspicious lesion. CONCLUSION: Our findings suggest that estheticians are capable of indicating the appropriate level of concern for abnormal lesions. Estheticians may serve as a valuable screening partner for dermatologists in the detection of skin cancer.
Assuntos
Melanoma , Neoplasias Cutâneas , Humanos , Estudos Transversais , Neoplasias Cutâneas/diagnóstico , Neoplasias Cutâneas/prevenção & controle , Melanoma/diagnóstico , Pele , Inquéritos e QuestionáriosRESUMO
OBJECTIVES: The objective of this study is to analyze the clinical and radiographic outcomes of implant-supported fixed protheses with cantilever extensions (ISFPCs) in the partially edentulous anterior mandible. MATERIALS AND METHODS: Patients who received anterior mandible implant restoration between January 2016 and December 2021 were included. Patients with two, three, or four continuous missing teeth receiving adjacent implant supported single-unit crowns (ISSCs), ISFPCs, implant-supported fixed protheses without cantilever extensions (ISFPNs) were divided into groups: ISSC+ISSC, ISFPC, ISSC+ISFPC, three-unit ISFPN, ISFPC+ISFPC, or four-unit ISFPN, respectively. We recorded and evaluated survival rates, mechanical and biological complications, peri-implant marginal bone loss (MBL), esthetic outcomes, and patient perceptions. Statistical analysis was performed using linear mixed models (LMM). RESULTS: The study included 87 patients and 152 implants. No implant loss occurred during an average follow-up of 3.48 ± 1.85 years (range: 1-7 years). According to LMM models, prosthetic type had a statistically significant impact on MBL during follow-up periods, in favor of the ISFPC and ISFPC+ISFPC groups (0.16 ± 0.48 mm vs. 0.51 ± 0.49 mm, p = .034; 0.22 ± 0.49 mm vs. 0.60 ± 0.62 mm, p = .043, respectively). Mechanical and biological complications were relatively low and comparable. The four-unit ISFPC group had higher subjective esthetic scores compared with the ISSC+ISSC group (98.6 vs. 83.8, p < .05), and patients in the ISFPC+ISFPC group expressed greater satisfaction with cleanability than the ISFPN group (98.8 vs. 80.6). CONCLUSION: ISFPCs offer a highly predictable treatment option in the anterior mandible, characterized by high survival rates, and comparable complication rates, peri-implant bone stability and esthetics to adjacent ISSCs or ISFPNs.
RESUMO
OBJECTIVES: The aim of this study was to evaluate esthetic parameters in the anterior maxillary region by comparing single-piece zirconia versus titanium narrow-diameter implants. Additionally, clinical, radiological and patient-reported outcome measures (PROMs) were analyzed. MATERIALS AND METHODS: Thirty implants (tissue level implant) were placed in 30 patients in the maxillary esthetic sector. Depending on randomization, a zirconia (test) or titanium implant (control) was placed. Esthetic, clinical, and radiological parameters, including the implant crown esthetic index (ICAI), pink esthetic score (PES), probing pocket depth, bleeding on probing, plaque index, and marginal bone levels, were evaluated at 12, 36 and 60 months after loading. RESULTS: Sixty months after crown placement, no significant differences were found between groups. The ICAI values were 5.25 ± 4.21 and 4.50 ± 2.98 for the test and control groups, respectively. The corresponding PES values were 7.44 ± 1.93 and 7.43 ± 1.74 for the test and control groups, respectively. There were no significant intergroup differences for the rest of the parameters evaluated. CONCLUSION: It can be suggested that monotype zirconia implants may serve as a potential alternative to titanium implants in selected clinical scenarios. While the results demonstrated comparable esthetic, clinical, and radiological aspects for zirconia implants as compared to titanium implants after a 5-year follow-up period, further research with larger sample sizes and longer-term follow-up is recommended.
RESUMO
The popularity of esthetic medicine is growing every year, also among patients with autoimmune inflammatory rheumatic diseases (AIRD). The objective of this study was to evaluate the safety of esthetic medicine (AM) procedures in patients with AIRD. A semi-structured, anonymous questionnaire regarding rheumatic and concomitant diseases and AM procedures was distributed among adult patients hospitalized in the rheumatology department or attending outpatient clinic in the National Institute of Geriatrics, Rheumatology, and Rehabilitation, Warsaw. The main outcome was the occurrence of an adverse event. A number of 512 patients took part in the survey and 15 were excluded (AM procedure preceded the diagnosis of AIRD). The study group consisted of 497 patients, of whom 47 had undergone AM procedures. The procedures performed included: tattooing (22 patients), piercing (16 patients), hyaluronic acid (7 patients), botulinum toxin (5 patients) injections, laser procedures (6 patients), plastic surgery (4 patients), mesotherapy (3 patients) and others. The vast majority of patients had these performed during remission or low disease activity. 70.2% of patients received treatment with disease-modifying antirheumatic drugs (DMARDs) during the AM procedure, with TNF-alfa inhibitors being the most common (63.6%). Adverse events occurred in 15% of patients. All were mild and transient site reactions. Most patients would like to repeat the AM procedure in the future. The use of esthetic medicine procedures in patients with AIRD, including those treated with biologic DMARDs, was associated with a risk of mild site reactions. Most of the patients expressed satisfaction with the results of the AM procedure.
Assuntos
Antirreumáticos , Doenças Reumáticas , Adulto , Humanos , Antirreumáticos/efeitos adversos , Inibidores do Fator de Necrose Tumoral/uso terapêutico , Inquéritos e Questionários , Doenças Reumáticas/tratamento farmacológicoRESUMO
Cellulite, a perceived alteration in skin topography, is predominantly found in adipose tissue-rich body regions such as the hips, buttocks, thighs, and abdomen. Contrary to common belief, the etiology and pathophysiology of cellulite are not well-established or universally agreed upon. This lack of understanding about the actual etiology of cellulite directly influences the selection of suitable treatments that can address both the aesthetic and inflammatory aspects of the condition. Various treatment methods, including electrophysical agents like electric currents, radiofrequency, ultrasound, and photobiomodulation, have been tested. However, the questionable methodological quality of many studies complicates the determination of effective treatments for cellulite. In this study, we conducted a systematic review of clinical studies that utilized electrophysical agents in cellulite treatment. METHODS: We employed the PICO (population, intervention, control, and outcome) process to develop our search strategy and establish inclusion/exclusion criteria. We searched five databases: Medline, Central, Scopus, Lilacs, and PEDro, for studies conducted between 2001 and July 2021 that involved cellulite treatment with electrophysical agents. To ensure systematicity and guide study selection, we adhered to the Preferred Reporting Items for Systematic Reviews and Meta-analysis (PRISMA) guidelines. RESULTS: Our initial search yielded 556 articles: 379 from Medline, 159 from Central, and 18 from Lilacs. After applying our inclusion criteria, only 32 studies remained. Of these, only two (6.2%) were evaluated as having strong and good methodology via the QualSyst tool. CONCLUSIONS: Our findings indicate that the quality of evidence from clinical studies on the use of electrophysical agents for cellulite treatment remains subpar. Further studies with robust experimental designs and more precise assessment techniques are necessary. While our study does not refute the effectiveness of the techniques used for cellulite treatment, it underscores the need for additional well-designed trials.
Assuntos
Celulite , Humanos , Celulite/terapia , Terapia por Estimulação Elétrica/métodos , Terapia com Luz de Baixa Intensidade/métodos , Ensaios Clínicos como Assunto , Terapia por Radiofrequência/métodosRESUMO
BACKGROUND: In rhinoplasty, it is very important to adjust the rotation and projection of the tip together harmoniously with the nasal dorsum and face to achieve pleasing results. OBJECTIVE: In this study, our aim is to describe a new modification of the vertical alar resection technique that can effectively regulate nasal tip projection and rotation. MATERIALS AND METHODS: Versatile vertical alar resection (V-VAR) technique was applied to 14 primary and 9 revision rhinoplasty cases with highly projected nasal tip. V-VAR technique consists of three steps. In the first step, the original dome point was marked. In patients with high tip projection and caudal rotation, resection was performed from the lateral crus of the original dome. In patients with high tip projection and cephalic rotation, resection was performed from the medial crus of the original dome. In patients with high nasal tip projection but adequate rotation, an equal amount of resections were performed from both the medial crus and lateral crus of the original dome. The patients were followed in average 18 months (between 12 and 24 months). RESULTS: The desired type of rotation and projection was achieved utilizing V-VAR technique in all patients. All patients had satisfactory esthetic results. CONCLUSIONS: In highly projected nasal tips, the height can be reduced using the proposed V-VAR technique. Rotation in the nasal tip region was maintained, increased or decreased in accordance with the esthetic aims.
Assuntos
Estética , Rinoplastia , Humanos , Rinoplastia/métodos , Feminino , Masculino , Adulto , Nariz/cirurgia , Adulto Jovem , Resultado do Tratamento , Pessoa de Meia-Idade , Cartilagens Nasais/cirurgia , Seguimentos , Reoperação/métodosRESUMO
This prospective clinical study aimed to assess self-reported orofacial esthetics, chewing function, and oral health-related quality of life (OHRQoL) over three years in the Kennedy Class I patients without posterior dentition who received free-end saddle removable partial dentures (RPDs) retained by two mini dental implants (MDIs) inserted in the canine/first premolar region. The study's robust findings reaffirm the viability of MDI-retained RPDs as a treatment modality in contemporary prosthodontics, instilling confidence in the dental community. MATERIALS AND METHODS: 92 participants with posterior edentulism in the maxilla or mandible received 184 MDIs and 92 RPDs. After one year, three participants were excluded, and another seven were excluded after three years. The final sample was 82 participants. Self-perceived orofacial esthetics was assessed by the Orofacial Esthetic Scale (OES), chewing function by the Chewing Function Questionnaire (CFQ), and the OHRQoL by the OHIP-14. Statistical analysis utilized multivariate regression analysis, standardized effect size calculation, Wilcoxon Signed Rank test, and Friedman's test. RESULTS: OHRQoL and chewing function significantly improved (p < 0.001) one month after MDI loading by the new RPDs and continued to improve over the observation period (p < 0.05). The OES also significantly improved (p < 0.001) and remained almost unchanged over the next three years (p = 0.440). CONCLUSION: Despite the limitations of this study, the MDI-retained RPD appears to be a viable treatment modality in contemporary prosthodontics from the patients' perspective.
Assuntos
Prótese Dentária Fixada por Implante , Prótese Parcial Removível , Estética Dentária , Mastigação , Saúde Bucal , Qualidade de Vida , Humanos , Estudos Prospectivos , Masculino , Feminino , Mastigação/fisiologia , Pessoa de Meia-Idade , Inquéritos e Questionários , Arcada Parcialmente Edêntula/reabilitação , Idoso , AdultoRESUMO
OBJECTIVE: The aim of the present study was to objectively assess the degree of residual facial asymmetry after primary treatment of non-syndromic unilateral cleft lip and palate (UCLP) in children and to correlate it with subjective ratings of facial appearance. MATERIALS AND METHODS: Stereophotometry was used to record the faces of 89 children with UCLP for comparison of cleft and non-cleft sides up to 5 years after primary cleft closure. Root mean square values were calculated to measure the difference between the shape of cleft and non-cleft sides of the face and were compared to controls without a cleft lip. The Asher-McDade Aesthetic Index (AMAI) was used for subjective rating of the nasolabial area through 12 laypersons. RESULTS: Children with a cleft lip (CL) showed no significant difference in RMS values compared to controls. Significant differences occurred when the evaluation was limited to the nasolabial area, however only in patients with cleft lip alveolus (CLA) and cleft lip palate (CLAP)(p < 0.001). In contrast, subjective ratings showed significantly higher values for all three cleft severity groups (CL, CLA, CLAP) compared to controls (p < 0.001). There was a non-linear correlation between the RMS (root mean square) values and the AMAI score. CONCLUSIONS: Even non-significant discrete objective deviations from facial symmetry in children after primary closure of UCLP are vigilantly registered in subjective ratings and implemented in the judgement of facial appearance. CLINICAL RELEVANCE: 3D stereophotometry is a usefull tool in monitoring asymmetry in patients with a cleft.
Assuntos
Fenda Labial , Fissura Palatina , Assimetria Facial , Humanos , Fenda Labial/cirurgia , Fissura Palatina/cirurgia , Feminino , Masculino , Criança , Estética , Pré-Escolar , FotogrametriaRESUMO
OBJECTIVES: To evaluate the stability of periodontal tissues 3 (T3), 6 (T6), and 12 (T12) months after esthetic crown lengthening (ACL) and the possible correlations between changes in those structures. MATERIALS AND METHODS: Twenty individuals were evaluated through clinical assessment, photography, and tomography. Measurements included gingival margin (GM), clinical crown length (CCL), interdental papilla height (PH) and width (PW), gingival thickness (GT), bone thickness (BT), probing depth (PD), distance between alveolar crest and GM, distance between alveolar crest and cementoenamel junction. Nonparametric and correlation statistics were performed (p < 0.05). RESULTS: CCL at T0 was 7.42 ± 0.70 mm and increased to 9.48 ± 0.49 mm immediately after ACL, but it decreased to 8.93 ± 0.65 mm at T12. PD decreased 0.60 mm from T0 to T6, and it increased 0.39 mm from T6 to T12. BT decreased 0.20 mm, while GT increased 0.29 mm from T0 to T12. Both PW and PH showed enlargement in T12. A positive moderate correlation was found between CCL/T0 and CCL/T12, GT/T0 and AC-GM/T12, BT/T0 and GT/T12. A few negative moderate correlations were PD/T0 and CCL/T12, PD/T0 and PH/T0, PD/T0 and BT/T12. CONCLUSIONS: ACL procedure was effective. Although some rebound occurred, that was not clinically important. PD tended to reestablish its original length, partially due to a migration of GM during the healing period. Besides, a thickening of supracrestal soft tissues was observed. CLINICAL RELEVANCE: The present study centers on the factors influencing the stability of periodontal tissues after esthetic crown lengthening, underscoring the procedure's influence on esthetics and biology and the need for careful treatment planning.
Assuntos
Aumento da Coroa Clínica , Estética Dentária , Humanos , Gengiva , Periodonto , Processo AlveolarRESUMO
OBJECTIVES: Evaluate the 5-year safety and efficacy of a narrow-diameter (3.0 mm) implant that was immediately provisionalized with a single crown in the maxillary lateral incisor or mandibular central or lateral incisor area. MATERIALS AND METHODS: An open, prospective, single-cohort, multicenter study was conducted, in which narrow-diameter implants were placed in fresh, healed extraction, or congenitally missing sites. All patients were required to meet strict criteria for immediate loading. The primary endpoints were marginal bone levels (MBL) and MBL changes (MBLC) from implant placement to 5-year follow-up. Secondary endpoints included cumulative 5-year survival and success rates, soft tissue health, and esthetic parameters. RESULTS: A total of 91 implants were placed in 77 patients. The mean MBL remained stable from the 1-year (- 0.79 ± 0.73 mm, n = 75) to 5-year (- 0.74 ± 0.87 mm, n = 65) follow-up. A marginal bone gain of 0.11 ± 0.83 mm was observed from the 1-year to 5-year follow-up. The cumulative 5-year survival rate was 96.5%, and the cumulative 5-year success rate was 93%. The clinical parameters, including the modified plaque index, modified sulcus bleeding index, Jemt's papilla index, and pink esthetic score improved throughout the 5-year study. CONCLUSIONS: The study demonstrated that narrow-diameter implants represent a safe and predictable treatment option for subjects suitable for immediate loading and with limited bone volume or limited inter-dental space. CLINICAL RELEVANCE: Narrow-diameter implants with immediate provisionalization can be considered for use to restore missing or damaged teeth with predictable functional and esthetic outcomes. This trial was registered with ClinicalTrials.gov (NCT02184845).
Assuntos
Coroas , Planejamento de Prótese Dentária , Estética Dentária , Carga Imediata em Implante Dentário , Humanos , Estudos Prospectivos , Feminino , Masculino , Pessoa de Meia-Idade , Adulto , Resultado do Tratamento , Implantes Dentários para Um Único Dente , Incisivo , IdosoRESUMO
OBJECTIVES: To evaluate three temporary luting cements in terms of their restoration loss rates, biological interactions, esthetic properties, and handling characteristics. MATERIALS AND METHODS: 75 adults requiring fixed prosthodontics voluntarily participated in a single-blind, randomized controlled trial. After preparation, temporary restorations were luted with a randomly selected temporary luting cement (either Provicol QM Plus (PQP), Bifix Temp (BT), or Provicol QM Aesthetic (PQA)). Clinical examinations were performed one to two weeks after cementation. The following criteria were evaluated: tooth vitality, percussion, hypersensitivity, gingival bleeding, odor formation, esthetics, cement handling, removability, cleanability, and retention loss. Antagonistic teeth served as controls. Statistical analysis was performed using the paired t-test, one-way ANOVA, Pearson's chi-square and Fisher's exact test, where appropriate. RESULTS: The overall loss rate of temporary restorations was 16.0%, showing no cement-specific differences. Postoperative hypersensitivity occurred in 8% of cases regardless of cement type. Esthetic impairment was reported by 31% of the PQP-fixed restorations, compared with 4.0% and 4.2% of the BT and PQA-bonded restorations. Cement application was reported to be easy in 100% of cases, excess removal in 88-96%, depending on the cement used. CONCLUSIONS: The choice of luting material affects the esthetic appearance of a temporary restoration and should be considered, particularly in restorations in esthetically demanding areas. No significant differences between the cements were identified regarding biocompatibility, handling, and loss rate. CLINICAL RELEVANCE: Translucent cements can help to reduce color interferences, resulting in a more appealing appearance of the temporary restoration.
Assuntos
Cimentos Dentários , Estética Dentária , Humanos , Método Simples-Cego , Masculino , Feminino , Cimentos Dentários/química , Adulto , Pessoa de Meia-Idade , Restauração Dentária Temporária , Idoso , Cimentação/métodosRESUMO
INTRODUCTION: Division of the suspensory ligament of the penis has emerged as a popular surgical approach for penile lengthening, but accurate preoperative predictions of lengthening outcomes remain elusive. This study aimed to identify readily measurable anatomical parameters associated with post-ligamentolysis penile length gain, facilitating more reliable preoperative estimations. METHODS: An experimental cross-sectional study was performed on 16 adult cadavers. Data collected before dissection included: age at death, ethnicity, height, length of the penis before dissection and width of the suspensory ligament of penis. Following the complete dissection of the suspensory ligament of penis, the depth of the pubic symphysis and the penile length after the procedure were measured. The absolute and relative length differences pre- and post-ligamentolysis were calculated. Correlation coefficients were used to study relations between these variables. RESULTS: Penile length increased uniformly after complete division of the suspensory ligament (average gain: 26.38 mm, SD = 14.83 mm; range 4-60 mm). Pearson correlation revealed a significant negative correlation between pre-ligamentolysis penile length and post-ligamentolysis increase (r = - 0.601; p = 0.014), suggesting greater gains in individuals with shorter pre-ligamentolysis lengths. Age, ligament width, and pubic arch depth showed no significant correlations. Ethnicity did not impact post-ligamentolysis length increase (t = - 0.135; p = 0.894). CONCLUSIONS: This study highlights the potential to predict penile length gain post-ligamentolysis through measurable anatomical parameters. The ability to anticipate the outcome of this procedure could empower surgeons to provide informed counseling, potentially elevating patient satisfaction. An experimental cross-sectional study was performed to investigate the outcomes of penile lengthening surgery Penile lengthening was achieved in all subjects via complete dissection of the suspensory ligament of the penis Penile length increase may be predicted preoperatively using easily measurable anatomical parameters NO LEVEL ASSIGNED: This journal requires that authors assign a level of evidence to each submission to which Evidence-Based Medicine rankings are applicable. This excludes Review Articles, Book Reviews, and manuscripts that concern Basic Science, Animal Studies, Cadaver Studies, and Experimental Studies. For a full description of these Evidence-Based Medicine ratings, please refer to the Table of Contents or the online Instructions to Authors www.springer.com/00266.
Assuntos
Cadáver , Ligamentos , Pênis , Humanos , Masculino , Ligamentos/anatomia & histologia , Ligamentos/cirurgia , Pênis/cirurgia , Pênis/anatomia & histologia , Estudos Transversais , Adulto , Pessoa de Meia-Idade , Idoso , Tamanho do ÓrgãoRESUMO
OBJECTIVE: The occurrence of peri-implant soft tissue dehiscence, especially in the esthetic zone, can be challenging. This study sought to investigate how the passage of time affects the outcomes of treatment for peri-implant soft tissue dehiscence coverage. MATERIALS AND METHODS: A literature search was performed up to April 2023 via PubMed, Scopus, and Web of Science to retrieve studies reporting the data on peri-implant soft tissue dehiscence of at least 2-time points (baseline and follow-up). Clinical trials with a minimum of 5 participants, reporting at least 1 primary outcome, and with a minimum follow-up of 3 months were included. The primary outcomes were the changes in dehiscence depth, complete coverage, and mean coverage at different time points. RESULTS: Seven studies with 112 participants and 119 implants were included. Dehiscence depth increased insignificantly between 3 to 6 months. Although the dehiscence depth increased from 6 to 12 months in the tunnel group, it decreased in the coronally advanced group, and a slight decrease was observed from 12 to 72 months. Soft tissue thickness was the predictor for soft tissue margin stability. However, no significant relationship was found between the baseline dehiscence depth and complete coverage. CONCLUSIONS: Within the limitations of this study, it seems prudent to wait at least 6 months to achieve a stable soft tissue margin. CLINICAL SIGNIFICANCE: The occurrence of peri-implant soft tissue dehiscence, especially in the esthetic zone, can be a challenging complication. It is important not only to achieve coverage but also to ensure that the treatment results remain stable in the long term, in order to satisfy both patients and clinicians. A reasonable approach would be to wait for at least 6 months to achieve a stable soft tissue margin.
Assuntos
Implantação Dentária , Implantes Dentários , Humanos , Implantes Dentários para Um Único Dente , Estética Dentária , Retalhos Cirúrgicos , Resultado do Tratamento , Fatores de TempoRESUMO
BACKGROUND/OBJECTIVE: A contemporary concept states that dental midline deviation towards the direction of facial flow line (FFL) can mask the compromised smile esthetics. This study aimed to identify a range of midline deviations that can be perceived towards or away from the FFL influencing smile esthetics. MATERIALS AND METHODS: A cross-sectional study was conducted using a frontal smile photograph of an adult female. The photograph was altered on Adobe Photoshop software into six different photographs by deviating the dental midlines towards and away from the FFL. A constant deviation of chin towards the left side was incorporated in all the photographs. Forty-three laypersons (LP) and dental professionals (DPs) evaluated those photographs. Independent t-test was used to compare the perception of dental midline deviation between LP and DPs. Simple linear regression was run to identify the factors associated with the scoring. RESULTS: A statistically significant difference was observed for picture two with 4 mm towards FFL in the perception of midline deviation between LP and DPs. LP could not perceive the midline deviations up to 4 mm while DPs were able to perceive deviations above 2 mm. The greater the age the better the scores were and female raters had a greater inclination towards poor scores. CONCLUSIONS: From 2 to 4 mm of midline deviation towards the FFL can be tolerated by LP and DPs. CLINICAL SIGNIFICANCE: These findings underscore the importance of considering facial symmetry in orthodontic and cosmetic dental treatments to optimize smile esthetics.
RESUMO
OBJECTIVE: The aim of the present study was to provide recommendations in order to facilitate communication between dental professionals and surgeons who are collaborating in the field of dentofacial esthetics. CLINICAL CONSIDERATIONS: Smile esthetics are beyond the scope, both of the surgeons who are collaborating with facial esthetics and of the dentists, as a wide range of treatment options from both sides is available. It can be difficult for the surgeon or the dentist that first comes in contact with the patient to conduct an individualized global treatment plan, in order to find out how the various phases of the treatment can be sequenced, as a workflow for an efficient interaction between facial surgery and dentistry still does not exist in the scientific literature. CONCLUSIONS: Facial cosmetic procedures and dental treatment have to be planned as individual elements of the whole dentofacial esthetic rehabilitation. The treatment has to be initiated with the design of the smile and the intraoral mock-up, followed by the required surgical interventions, and to be finished with the delivery of the definitive dental restoration. CLINICAL SIGNIFICANCE: Dentofacial esthetics require comprehensive communication between surgeons and dentists. Following the proposed recommendations, an individualized interdisciplinary treatment plan can be conducted, defining the role of each specialty.
RESUMO
OBJECTIVES: This article presents case reports highlighting over-treatments with resin composites, often misconceived as minimally invasive procedures. CLINICAL CONSIDERATIONS: Tooth-colored restorative materials, such as ceramics and composites, have found widespread application to correct problems related to tooth color, shape, and alignment. When composite resin is used, these procedures can be done in a very conservative, cost-effective, and timely fashion. However, it is noteworthy that contemporary dental esthetic expectations are based on standards propagated by social media and other marketing and communications platforms. The abuse of and addiction to social media impacts can lead to unrealistic esthetic expectations and standards for both patients and dentists. CONCLUSIONS: After a critical discussion on ceramic veneers published in part I of this 2-part series, this article directs attention towards what has become a trendy fashion, i.e., the use of direct composite resins as "non-prep" veneers in clinical situations that arguably required no restorative intervention at all. We further explore how social media influences the decision-making processes of both professionals and patients.
Assuntos
Resinas Compostas , Mídias Sociais , Humanos , Estética Dentária , Facetas Dentárias , Materiais Dentários , CerâmicaRESUMO
BACKGROUND: Contemporary fixed orthodontic appliances are shifting from non-customized pre-adjusted appliances to custom-designed and printed appliances with novel digital setup systems. We are one step closer to precision dentistry and orthodontics using personalized mechanics and custom appliances. However, despite the evidential enhancement and other improvements to fixed appliances, tooth movement is still limited to five degrees of freedom. Opening or closing spaces still requires manually placing elastomeric chains or coil springs. AIM: In this article, we aimed to demonstrate how advancements in CAD/CAM technology, reverse engineering, and digital customization are helping orthodontics constantly evolve, enabling treatment with enhanced esthetics and minimal compliance. The clinical system (InBrace®, Irvine, CA) described in this article uses a patient-specific, digitally designed multiloop NITI wire that delivers friction-free, light, and continuous forces and activates automatically whenever the malocclusion deviates from the digital setup. CONCLUSION: Through digital customization, InBrace allows for automated tooth movement in all six degrees of freedom, including space opening or closure, via programmed non-sliding mechanics. CLINICAL SIGNIFICANCE: Precision orthodontics and personalized treatment have been significant developments in orthodontics recently. This article focuses on how a technologically advanced lingual appliance system could achieve targeted cosmetic results methodically via automation and personalization.
Assuntos
Desenho Assistido por Computador , Estética Dentária , Desenho de Aparelho Ortodôntico , Técnicas de Movimentação Dentária , Humanos , Técnicas de Movimentação Dentária/instrumentação , Técnicas de Movimentação Dentária/métodos , FemininoRESUMO
OBJECTIVE: Increasing aesthetic demands require that the color and contour of the peri-implant soft tissues be in harmony with the neighboring teeth. Recession, migration toward the apical, is a frequent clinical finding. Its presence can lead to inflammation and increased marginal bone loss. These complications, in addition to affecting the aesthetic results of our treatment, are difficult to treat and can threaten the survival of the implant. There are fewer studies showing the outcome of treatment of soft-tissue defects around implants. The aim of this article is to describe the treatment of a soft-tissue defect around an implant-supported prosthesis treatment, performed on two neighboring implants, in the esthetic zone in a patient with a high smile and to evaluate both the coverage achieved and the patient's esthetic satisfaction. CLINICAL CONSIDERATIONS: This study showed that a mucogingival approach, using a surgical technique designed for the treatment of alveolar ridge defects, together with tissue management with temporaries and a new restoration, achieved an optimal result. CONCLUSIONS: The case has been closely followed up, for 10 years, and the authors have been able to confirm the long-term stability of the result. CLINICAL SIGNIFICANCE: The following paper shows the result of an innovative approach. Connective tissue platform technique, usually performed for soft-tissue augmentation, was used for a defect in soft-tissue dehiscence. The authors followed the results for 10 years, and the results achieved were satisfactory in terms of esthetic.
Assuntos
Implantes Dentários para Um Único Dente , Implantes Dentários , Humanos , Resultado do Tratamento , Estética Dentária , Implantação Dentária Endóssea/métodos , Maxila/cirurgiaRESUMO
OBJECTIVE: Demonstrate the ability of 0.5 mm thickness lithium disilicate laminates associated with resin cement to mask different substrate saturations. METHODS: 60 specimens (n = 5) were prepared with CAD/CAM lithium disilicate glass-ceramic IPS e.max CAD, 0.5 mm thick, in three degrees of translucency (HT, MT and LT); cemented by Variolink Esthetic LC Light+ (L) and Neutral (N) on composite resin substrates A1 and A4 shades. Color measurements were performed by a spectrophotometer (CM-3700d -Konica Minolta). The L*, a*, b* parameters of the tri-layer structure (laminate/ resin cement/ substrate) were used to calculate color difference ( ∆ E 00 ) by CIEDE2000 formula and Translucency Parameter ( TP 00 ). This study adopted ∆ E 00 = 0.8, as perceptibility threshold (PT), and ∆ E 00 = 1.8, as acceptability threshold (AT). Statistical analyses were performed by one-way ANOVA and Tukey tests (a = 0.05). RESULTS: Color difference between resin cement shades showed statistical differences (p < 0.0001) and ∆ E 00 > 1.8 for all groups. Color difference between substrates saturations showed a significant statistical difference (p < 0.0001) and ∆ E 00 values above AT for all groups. The TP 00 demonstrated significant statistical differences (p < 0.0001). The LTL combination, the opaquest set, showed the smallest ∆ E 00 values between substrate shades differences, however, above AT. CONCLUSION: The translucency of the lithium disilicate, the substrate saturation and the resin cement opacity influenced final color of restoration. The ceramic translucency impact on final color was reduced by opaque resin cement. Furthermore, the LT lithium disilicate and the Light+ resin cement reduced the translucency of the restoration, contributing to mask saturated substrate. CLINICAL RELEVANCE: This study shows the influence of conservative lithium disilicate laminates with different degrees of translucency associated with resin cement on final color of saturated substrate restorations. A minimally invasive esthetic protocol for masking substrates is demonstrated by associating low translucency ceramic laminates and opaque resin cement.
Assuntos
Estética Dentária , Cimentos de Resina , Cimentos de Resina/química , Porcelana Dentária/química , Cerâmica/química , Teste de Materiais , Cor , Propriedades de SuperfícieRESUMO
OBJECTIVE: To evaluate the profilometric, esthetic, and patient-reported outcomes of peri-implant tissues in the maxillary anterior esthetic zone following guided bone regeneration (GBR) using the L-shape technique combined with delayed connective tissue grafting (CTG). MATERIALS AND METHODS: Profilometric and pink esthetic score (PES) measurements were performed at the time of implant surgery with GBR (T0) and at the 1- (T1), 2- (T2), and 3-year (T3) follow-up. Patient-reported outcomes were also assessed using the Oral Health Impact Profile-14 (OHIP-14) questionnaire. Statistical analysis over 3 years of follow-up assessed changes at time points (T0, T1, T2, and T3) and time periods (T0-T1, T0-T2, and T0-T3) using the Wilcoxon signed-rank test. RESULTS: A total of 12 patients (57.5 ± 12.3 years) were included in this study. The mean profilometric change in peri-implant tissues over the 3-year follow-up period was 3.49 ± 1.11 mm, and the buccal contours were not significantly different between the comparison periods. The PES remained stable, while all OHIP-14 domain scores improved significantly. CONCLUSION: Simultaneous implant placement and GBR using the L-shape technique combined with delayed CTG in the maxillary anterior region provides stable buccal profiles and consistent esthetics and improves patient-reported quality of life over a 3-year period. CLINICAL SIGNIFICANCE: This study demonstrated that GBR using the L-shape technique combined with delayed CTG in the maxillary anterior region improved the buccal profile, esthetics, and patient-reported quality of life.