Dense Monolayer Network Structures of Double Hydrophilic Hyperbranched Copolymers at the Air/Water Interface.

Influences of subphase pH and temperature on the interfacial aggregation behavior of two double hydrophilic hyperbranched copolymers of poly[oligo(ethylene glycol) methacrylate-co-(2-diisopropylamino)ethyl methacrylate] (P(OEGMA-co-DIPAEMA)) at the air/water interface are studied by the Langmuir film balance technique. Morphologies of their Langmuir-Blodgett (LB) films are characterized by atomic force microscopy (AFM). At the interface, P(OEGMA-co-DIPAEMA) copolymers tend to form a dense network structure of circular micelles composed of branching agent-connected carbon backbone cores and mixed shells of OEGMA and DIPAEMA segments (pendant groups). This network structure containing many honeycomb-like holes with diameters of 6-8 nm is identified for the first time and clearly observed in the enlarged AFM images of their LB films. Under acidic conditions, surface pressure versus molecular area isotherms of the two copolymers in the low-pressure region show larger mean molecular area than those under neutral and alkaline conditions due to the lack of impediment from DIPAEMA segments. Upon further compression, each isotherm exhibits a wide pseudo-plateau, which corresponds to OEGMA segments being pressed into the subphase. Furthermore, the isotherms under neutral and alkaline conditions exhibit the lower critical solution temperature behavior of OEGMA segments, and the critical temperature is lower when the hyperbranched copolymer contains higher OEGMA content.

Equipment-Free Fabrication of Thiolated Reduced Graphene Oxide Langmuir-Blodgett Films: A Novel Approach for Versatile Surface Engineering.

This research presents a novel method for the fabrication of mercapto reduced graphene oxide (m-RGO) Langmuir-Blodgett (LB) films without the need for specialized equipment. The conventional LB technique offers precise control over the deposition of thin films onto solid substrates, but its reliance on sophisticated instrumentation limits its accessibility. In this study, we demonstrate a simplified approach that circumvents the necessity for such equipment, thereby democratizing the production of m-RGO LB films. Thiolation of reduced graphene oxide (rGO) imparts enhanced stability and functionality to the resulting films, rendering them suitable for a wide range of applications in surface engineering, sensing, and catalysis. The fabricated m-RGO LB films exhibit favorable morphological, structural, and surface properties, as characterized by various analytical techniques including scanning electron microscopy (SEM), X-ray diffraction (XRD), and Fourier-transform infrared spectroscopy (FTIR). Furthermore, the performance of the m-RGO LB films is evaluated in terms of their surface wettability, electrochemical behavior, and chemical reactivity. The equipment-free fabrication approach presented herein offers a cost-effective and scalable route for the production of functionalized graphene-based thin films, thus broadening the scope for their utilization in diverse technological applications.

Langmuir-Blodgett Films with Immobilized Glucose Oxidase Enzyme Molecules for Acoustic Glucose Sensor Application.

In this work, a sensitive coating based on Langmuir-Blodgett (LB) films containing monolayers of 1,2-dipalmitoyl-sn-glycero-3-phosphoethanolamine (DPPE) with an immobilized glucose oxidase (GOx) enzyme was created. The immobilization of the enzyme in the LB film occurred during the formation of the monolayer. The effect of the immobilization of GOx enzyme molecules on the surface properties of a Langmuir DPPE monolayer was investigated. The sensory properties of the resulting LB DPPE film with an immobilized GOx enzyme in a glucose solution of various concentrations were studied. It has shown that the immobilization of GOx enzyme molecules into the LB DPPE film leads to a rising LB film conductivity with an increasing glucose concentration. Such an effect made it possible to conclude that acoustic methods can be used to determine the concentration of glucose molecules in an aqueous solution. It was found that for an aqueous glucose solution in the concentration range from 0 to 0.8 mg/mL the phase response of the acoustic mode at a frequency of 42.7 MHz has a linear form, and its maximum change is 55°. The maximum change in the insertion loss for this mode was 18 dB for a glucose concentration in the working solution of 0.4 mg/mL. The range of glucose concentrations measured using this method, from 0 to 0.9 mg/mL, corresponds to the corresponding range in the blood. The possibility of changing the conductivity range of a glucose solution depending on the concentration of the GOx enzyme in the LB film will make it possible to develop glucose sensors for higher concentrations. Such technological sensors would be in demand in the food and pharmaceutical industries. The developed technology can become the basis for creating a new generation of acoustoelectronic biosensors in the case of using other enzymatic reactions.

Concentration dependent debundling and single tube dispersions of pristine multiwalled carbon nanotubes functionalized with double tail phospholipids.

Multiwalled carbon nanotubes (MWNTs) exist as aggregates of highly entangled tubes due to large aspect ratios and strong Van der Waals interactions among them in their native states. In order to render them suitable for any application, MWNTs need to be separated and dispersed uniformly in a solvent preferably as individual tubes. In the present work, it is demonstrated that a double tail lipid such as 1, 2-dipalmitoyl-sn-glycero-3-phosphoethanolamine (DPPE) is capable of dispersing MWNTs in ethanol. Ultra-stable suspensions were obtained by optimizing two key parameters: DPPE to MWNT weight ratio (ε) and MWNT concentration (c). Stability of the suspensions increased with the increasingεvalue up to an optimum point (ε= 1.8) and then decreased drastically beyond that. CNT dispersions withε= 1.8 were extremely stable (with a Zeta potential of 108.26 ± 2.15 mV) and could be retained in suspended form up to 3 months. Effect of MWNT concentration on disaggregation was very significant and stable suspensions could be formed for MWNT concentrations only below 0.14 mg ml-1. Above this concentration, no stable dispersions could be obtained even withε= 1.8. Compression isotherms of Langmuir monolayers of the DPPE functionalized MWNTs spread at the air water interface were highly repeatable, suggesting that the MWNTs in dispersion were present as separate tubes coated with phospholipids. SEM micrographs of the Langmuir-Blodgett (LB) films, deposited at high surface pressures on silicon wafers, show that MWNTs remain as single nanotubes with no signs of reaggregation. TEM micrographs of MWNT suspensions indicated random adsorption of DPPE on MWNTs. Our work makes it possible to explore potential applications of LB films of MWNTs (stabilized by DPPE) in the development of conducting thin films for sensor applications or as supports to immobilize catalysts for heterogenous reactions.

Closing the Gap for Electronic Short-Circuiting: Photosystem†I Mixed Monolayers Enable Improved Anisotropic Electron Flow in Biophotovoltaic Devices.

Well-defined assemblies of photosynthetic protein complexes are required for an optimal performance of semi-artificial energy conversion devices, capable of providing unidirectional electron flow when light-harvesting proteins are interfaced with electrode surfaces. We present mixed photosystem I (PSI) monolayers constituted of native cyanobacterial PSI trimers in combination with isolated PSI monomers from the same organism. The resulting compact arrangement ensures a high density of photoactive protein complexes per unit area, providing the basis to effectively minimize short-circuiting processes that typically limit the performance of PSI-based bioelectrodes. The PSI film is further interfaced with redox polymers for optimal electron transfer, enabling highly efficient light-induced photocurrent generation. Coupling of the photocathode with a [NiFeSe]-hydrogenase confirms the possibility to realize light-induced H2 evolution.

Nanoscale Chemical Imaging of Supported Lipid Monolayers using Tip-Enhanced Raman Spectroscopy.

Visualizing the molecular organization of lipid membranes is essential to comprehend their biological functions. However, current analytical techniques fail to provide a non-destructive and label-free characterization of lipid films under ambient conditions at nanometer length scales. In this work, we demonstrate the capability of tip-enhanced Raman spectroscopy (TERS) to probe the molecular organization of supported DPPC monolayers on Au (111), prepared using the Langmuir-Blodgett (LB) technique. High-quality TERS spectra were obtained, that permitted a direct correlation of the topography of the lipid monolayer with its TERS image for the first time. Furthermore, hyperspectral TERS imaging revealed the presence of nanometer-sized holes within a continuous DPPC monolayer structure. This shows that a homogeneously transferred LB monolayer is heterogeneous at the nanoscale. Finally, the high sensitivity and spatial resolution down to 20 nm of TERS imaging enabled reproducible, hyperspectral visualization of molecular disorder in the DPPC monolayers, demonstrating that TERS is a promising nanoanalytical tool to investigate the molecular organization of lipid membranes.

Synthesis and Assembly of Zinc Oxide Microcrystals by a Low-Temperature Dissolution-Reprecipitation Process: Lessons Learned About Twin Formation in Heterogeneous Reactions.

Cobalt-doped zinc oxide single crystals with the shape of hexagonal platelets were synthesized by thermohydrolysis of zinc acetate, cobalt acetate, and hexamethylenetetramine (HMTA) in mixtures of ethanol and water. The mineralization proceeds by a low-temperature dissolution-reprecipitation process from the liquid phase by the formation of basic cobalt zinc salts as intermediates. The crystal shape as well as twin formation of the resulting oxide phase can be influenced by careful choice of the solvent mixture and the amount of doping. An understanding of the course of the reaction was achieved by comprehensive employment of analytical techniques (i.e., SEM, XRD, IR) including an in-depth HRTEM study of precipitates from various reaction stages. In addition, EPR as well as UV/Vis spectroscopic measurements provide information about the insertion of the cobalt dopant into the zincite lattice. The Langmuir-Blodgett (LB) technique is shown to be suitable for depositing coatings of the platelets on glass substrates functionalized with polyelectrolyte multilayers and hence is applied for the formation of monolayers containing domains with ordered tessellation. No major differences are found between deposits on substrates with anionic or cationic surface modification. The adherence to the substrates is sufficient to determine the absolute orientation of the deposited polar single crystals by piezoresponse force microscopy (PFM) and Kelvin probe force microscopy (KPFM) studies.

The Power of Assemblies at Interfaces: Nanosensor Platforms Based on Synthetic Receptor Membranes.

Synthetic sensing materials (artificial receptors) are some of the most attractive components of chemical/biosensors because of their long-term stability and low cost of production. However, the strategy for the practical design of these materials toward specific molecular recognition in water is not established yet. For the construction of artificial material-based chemical/biosensors, the bottom-up assembly of these materials is one of the effective methods. This is because the driving forces of molecular recognition on the receptors could be enhanced by the integration of such kinds of materials at the 'interfaces', such as the boundary portion between the liquid and solid phases. Additionally, the molecular assembly of such self-assembled monolayers (SAMs) can easily be installed in transducer devices. Thus, we believe that nanosensor platforms that consist of synthetic receptor membranes on the transducer surfaces can be applied to powerful tools for high-throughput analyses of the required targets. In this review, we briefly summarize a comprehensive overview that includes the preparation techniques for molecular assemblies, the characterization methods of the interfaces, and a few examples of receptor assembly-based chemical/biosensing platforms on each transduction mechanism.

Chirality-Controlled Self-Assembly of Amphiphilic Dibenzo[6]helicenes into Langmuir-Blodgett Thin Films.

Racemic and highly enantioenriched 3-methoxycarbonyl, 3-carboxy, and 3-hydroxymethyl derivatives of dibenzo[6]helicene were prepared. The Langmuir layers of these helicenes were formed at the air-water interface and transferred onto solid substrates to afford Langmuir-Blodgett films, which were then studied by ambient atomic force microscopy and (chir)optical spectroscopy. Significant differences were found in the behaviour of the Langmuir layers as well as in the morphology, UV/Vis, electronic circular dichroism (ECD), and fluorescence spectra of the Langmuir-Blodgett thin films depending on the molecular chirality and nature of the polar group. The experimental results were supported by molecular dynamics simulations.

Is alkaline phosphatase biomimeticaly immobilized on titanium able to propagate the biomineralization process?

Tissue-nonspecific alkaline phosphatase (TNAP) is a key enzyme in the biomineralization process as it produces phosphate from a number of phospho-substrates stimulating mineralization while it also inactivates inorganic pyrophosphate, a potent mineralization inhibitor. We have previously reported on the reconstitution of TNAP on Langmuir monolayers as well as proteoliposomes. In the present study, thin films composed of dimyristoylphosphatidic acid (DMPA) were deposited on titanium supports by the Langmuir-Blodgett (LB) technique, and we determined preservation of TNAP's phosphohydrolytic activity after incorporation into the LB films. Increased mineralization was observed after exposing the supports containing the DMPA:TNAP LB films to solutions of phospho-substrates, thus evidencing the role of TNAP on the growth of calcium phosphates after immobilization. These coatings deposited on metallic supports can be potentially applied as osteoconductive materials, aiming at the optimization of bone-substitutes integration in vivo.

Atypical Film-Forming Behavior of Soluble Tetra-3-Nitro-Substituted Copper Phthalocyanine.

Thin films of metal phthalocyanines (MPc) are known to exhibit excellent physical properties but poorly controlled morphologies. Therefore, the present work seeks to understand the film growth mechanism of a model compound for potentially usable MPc, specifically, copper tetra(3-nitro-5-tert-butyl)phthalocyanine (CuPc*). The Langmuir-Schaefer (LS) technique was applied to prepare a series of CuPc* films under different processing conditions. The film growth was examined by Brewster angle microscopy (BAM) on the water surface and small-angle X-ray scattering (SAXS) from the solid films. Neutron reflectometry (NR) measurements of the water uptake into the films and computer simulation of hydrated CuPc* were performed to substantiate an idea of colloidal MPc-water aggregates as nanoscale precursors of smooth solid films. This idea appears fruitful in terms of materials chemistry.

Biomimetic Chiral Photonic Crystals.

Although it is well known that the amazing iridescent colors of the cuticle of beetles reflect the intricate nanoscale organization of bio-fibers, artificial inorganic materials with comparable optical responses have not yet been synthesized from abiotic nanoscale building blocks. Such materials could find broad applications, including in circular polarizers, to generate circularly polarized luminescence, or in lasers. Herein, we describe a general method for the fabrication of biomimetic chiral photonic crystals by Langmuir-Schaefer assembly of colloidal inorganic nanowires. We not only reproduced the intricate helical structure and circularly polarized color reflection observed in beetles, but also achieved the highest chiroptical activity with a dissymmetry factor of -1.6 ever reported for chiral inorganic nanostructures. More importantly, the programmable structural control based on the precise interlayer arrangement endows us with unprecedented freedom to manipulate the optical activity of as-fabricated chiral photonic crystals.

Gold Nanowire Chiral Ultrathin Films with Ultrastrong and Broadband Optical Activity.

An ultrastrong and broadband chiroptical response is key but remains challenging for many device applications. A simple and cost-effective bottom-up method is introduced to fabricate large-area long-range ordered chiral ultrathin films with the Langmuir-Schaeffer technique using gold nanowires as building blocks. Significantly, as-prepared ultrathin films display giant optical activity across a broad wavelength range covering visible and near infrared regions with an anisotropic factor of up to 0.285, which is the record value for bottom-up techniques. Detailed experimental result and theoretical analysis disclose that such remarkable optical activity originates from birefringence and dichroism of the well-aligned Au nanowire layers in the ultrathin films. The universality of this facile strategy for constructing chiral ultrathin films is further demonstrated with many other one-dimensional nanomaterials.

Synthesis of an Open-Cage Structure POSS Containing Various Functional Groups and Their Effect on the Formation and Properties of Langmuir Monolayers.

Recently, silsesquioxanes have been recognized as a new group of film-forming materials. This study has been aimed at determining the effect of the kind of functional groups present in two different open-cage structure POSS molecules on the possibility of the formation of Langmuir monolayers and their properties. To achieve this goal, two new POSS derivatives (of open-cage structures) containing polyether and fluoroalkyl functional groups have been synthesized on the basis of a hydrosilylation process. An optimization of the process was performed, which makes it possible to obtain the above-mentioned derivatives with high yields. In the next step, the Langmuir technique was applied to measurements of the surface pressure (π) - the mean molecular area (A) isotherms during the compression of monolayers formed by molecules of the two POSS derivatives considered. Subsequently, the monolayers were transferred onto quartz plates according to the Langmuir-Blodgett technique. Both derivatives are able to form insoluble Langmuir films at the air-water interface, which can be transferred onto a solid substrate and effectively change its wetting properties.

Exploring the Effect of Ligand Structural Isomerism in Langmuir-Blodgett Films of Chiral Luminescent Eu(III) Self-Assemblies.

Here we have investigated the influence of the antenna group position on both the formation of chiral amphiphilic Eu(III) -based self-assemblies in CH3 CN solution and, on the ability to form monolayers on the surface of quartz substrates using the Langmuir-Blodgett technique, by changing from the 1-naphthyl (2(R), 2(S)) to the 2-naphthyl (1(R), 1(S)) position. The evaluation of binding constants of the self- assemblies in CH3 CN solution was achieved using conventional techniques such as UV/Visible and luminescence spectroscopies along with more specific circular dichroism (CD) spectroscopy. The binding constants obtained for EuL, EuL2 and EuL3 species in the case of 2-naphthyl derivatives were comparable to those obtained for 1-naphthyl derivatives. The analysis of the changes in the CD spectra of 1(R) and 1(S) upon addition of Eu(III) not only allowed us to evaluate the values of the binding constants but the resulting recalculated spectra may also be used as fingerprints for assignment of the chiral self-assembly species formed in solution. The obtained monolayers were predominantly formed from EuL3 (≈85 %) with the minor species present in ≈15 % EuL2 .

Design and Synthesis of Aviram-Ratner-Type Dyads and Rectification Studies in Langmuir-Blodgett (LB) Films.

The design and synthesis of Aviram-Ratner-type molecular rectifiers, featuring an anilino-substituted extended tetracyanoquinodimethane (exTCNQ) acceptor, covalently linked by the σ-spacer bicyclo[2.2.2]octane (BCO) to a tetrathiafulvalene (TTF) donor moiety, are described. The rigid BCO spacer keeps the TTF donor and exTCNQ acceptor moieties apart, as demonstrated by X-ray analysis. The photophysical properties of the TTF-BCO-exTCNQ dyads were investigated by UV/Vis and EPR spectroscopy, electrochemical studies, and theoretical calculations. Langmuir-Blodgett films were prepared and used in the fabrication and electrical studies of junction devices. One dyad showed the asymmetric current-voltage (I-V) curve characteristic for rectification, unlike control compounds containing the TTF unit but not the exTCNQ moiety or comprising the exTCNQ acceptor moiety but lacking the donor TTF part, which both gave symmetric I-V curves. The direction of the observed rectification indicated that the preferred electron current flows from the exTCNQ acceptor to the TTF donor.

Quantum dot effects upon the interaction between porphyrins and phospholipids in cell membrane models.

This study employed surface pressure isotherms and spectroscopic techniques to investigate the effect of quantum dots on the interaction between porphyrins and phospholipids using Langmuir monolayers and Langmuir-Blodgett films formed from negatively charged DMPA (the sodium salt of dimyristoyl-sn-glycero-phosphatidyl acid) and zwitterionic DPPC (1,2-dipalmitoyl-sn-glycero-3-phosphocholine) as cell membrane models in the presence of 5,10,15,20-tetrakis(4-N-tetradecyl-pyridyl) porphyrin (TMPyP), 5,10,15,20-tetrakis(p-sulfonato-phenyl) porphyrin (TPPS4) and PEG-coated CdSe/ZnS quantum dots (QD). The porphyrins present at the monolayer subphase affected the organization of the lipids at the air/liquid interface, as shown by the changes in the surface pressure-surface area isotherms. QDs enhanced the interaction of TMPyP with DMPA, improving their transference from the liquid monolayers to solid supports. A higher amount of TMPyP was transferred to DMPA-Langmuir-Blodgett films when the QDs were present in the subphase as evidenced by the UV-Vis data. For DPPC the surface effects due to the presence of QDs are less evident.

Towards Organized Hybrid Nanomaterials at the Air/Water Interface Based on Liquid-Crystal/ZnO Nanocrystals.

The ability to self-assemble nanosized ligand-stabilized metal oxide or semiconductor materials offers an intriguing route to engineer nanomaterials with new tailored properties from the disparate components. We describe a novel one-pot two-step organometallic approach to prepare ZnO nanocrystals (NCs) coated with deprotonated 4-(dodecyloxy)benzoic acid (i.e., an X-type liquid-crystalline ligand) as a model LC system (termed ZnO-LC1 NCs). Langmuir and Langmuir-Blodgett films of the resulting hybrids are investigated. The observed behavior of the ZnO NCs at the air/water interface is rationalized by invoking a ZnO-interdigitation process mediated by the anchored liquid-crystalline shell. The ordered superstructures form according to mechanism based on a ZnO-interdigitation process mediated by liquid crystals (termed ZIP-LC). The external and directed force applied upon compression at the air/water interface and the packing of the ligands that stabilize the ZnO cores drives the formation of nanorods of ordered internal structure. To study the process in detail, we follow a nontraditional protocol of thin-film investigation. We collect the films from the air/water interface in powder form (ZnO-LC1 LB), resuspend the powder in organic solvents and utilize otherwise unavailable experimental techniques. The structural and physical properties of the resulting superlattices were studied by using electron microscopy, atomic force microscopy, X-ray studies, dynamic light scattering, thermogravimetric analysis, UV/Vis absorption, and photoluminescence spectroscopy.

Amphiphilic Organic-Inorganic Hybrid Zeotype Aluminosilicate like a Nanoporous Crystallized Langmuir-Blodgett Film.

A new organic-inorganic hybrid zeotype compound with amphiphilic one-dimensional nanopore and aluminosilicate composition was developed. The framework structure is composed of double aluminosilicate layers and 12-ring nanopores; a hydrophilic layer pillared by Q(2) silicon atom species and a lipophilic layer pillared by phenylene groups are alternately stacked, and 12-ring nanopores perpendicularly penetrate the layers. The framework topology looks similar to that of an AFI-type zeolite but possesses a quasi-multidimensional pore structure consisting of a 12-ring channel and intersecting small pores equivalent to 8-rings. The hybrid material with alternately laminated lipophilic and hydrophilic nanospaces can be assumed as a crystallized Langmuir-Blodgett film. It demonstrates microporous adsorption for both hydrophilic and lipophilic adsorptives, and its outer surface tightly adsorbs lysozyme whose molecular size is much larger than its micropore opening. Our results suggest the possibility of designing porous adsorbent with high amphipathicity.

Self-assembled metal-organic frameworks crystals for chemical vapor sensing.

A 3D metal-organic frameworks (MOFs) crystals film is obtained via Langmuir-Blodgett technique and used as a photonic sensor for chemical vapor detection. The MOFs crystals film exhibits both acute responses towards various chemical vapors and high controllability in terms of peak intensity and position. The method represents a general, facile and flexible strategy for the fabrication of MOFs-based photonic sensors.