Secure Enhancement for MQTT Protocol Using Distributed Machine Learning Framework.

The Message Queuing Telemetry Transport (MQTT) protocol stands out as one of the foremost and widely recognized messaging protocols in the field. It is often used to transfer and manage data between devices and is extensively employed for applications ranging from smart homes and industrial automation to healthcare and transportation systems. However, it lacks built-in security features, thereby making it vulnerable to many types of attacks such as man-in-the-middle (MitM), buffer overflow, pre-shared key, brute force authentication, malformed data, distributed denial-of-service (DDoS) attacks, and MQTT publish flood attacks. Traditional methods for detecting MQTT attacks, such as deep neural networks (DNNs), k-nearest neighbor (KNN), linear discriminant analysis (LDA), and fuzzy logic, may exist. The increasing prevalence of device connectivity, sensor usage, and environmental scalability become the most challenging aspects that novel detection approaches need to address. This paper presents a new solution that leverages an H2O-based distributed machine learning (ML) framework to improve the security of the MQTT protocol in networks, particularly in IoT environments. The proposed approach leverages the strengths of the H2O algorithm and architecture to enable real-time monitoring and distributed detection and classification of anomalous behavior (deviations from expected activity patterns). By harnessing H2O's algorithms, the identification and timely mitigation of potential security threats are achieved. Various H2O algorithms, including random forests, generalized linear models (GLMs), gradient boosting machine (GBM), XGBoost, and the deep learning (DL) algorithm, have been assessed to determine the most reliable algorithm in terms of detection performance. This study encompasses the development of the proposed algorithm, including implementation details and evaluation results. To assess the proposed model, various evaluation metrics such as mean squared error (MSE), root-mean-square error (RMSE), mean per class error (MCE), and log loss are employed. The results obtained indicate that the H2OXGBoost algorithm outperforms other H2O models in terms of accuracy. This research contributes to the advancement of secure IoT networks and offers a practical approach to enhancing the security of MQTT communication channels through distributed detection and classification techniques.

IoT-Based Wireless System for Gait Kinetics Monitoring in Multi-Device Therapeutic Interventions.

This study presents an IoT-based gait analysis system employing insole pressure sensors to assess gait kinetics. The system integrates piezoresistive sensors within a left foot insole, with data acquisition managed using an ESP32 board that communicates via Wi-Fi through an MQTT IoT framework. In this initial protocol study, we conducted a comparative analysis using the Zeno system, supported by PKMAS as the gold standard, to explore the correlation and agreement of data obtained from the insole system. Four volunteers (two males and two females, aged 24-28, without gait disorders) participated by walking along a 10 m Zeno system path, equipped with pressure sensors, while wearing the insole system. Vertical ground reaction force (vGRF) data were collected over four gait cycles. The preliminary results indicated a strong positive correlation (r = 0.87) between the insole and the reference system measurements. A Bland-Altman analysis further demonstrated a mean difference of approximately (0.011) between the two systems, suggesting a minimal yet significant bias. These findings suggest that piezoresistive sensors may offer a promising and cost-effective solution for gait disorder assessment and monitoring. However, operational factors such as high temperatures and sensor placement within the footwear can introduce noise or unwanted signal activation. The communication framework proved functional and reliable during this protocol, with plans for future expansion to multi-device applications. It is important to note that additional validation studies with larger sample sizes are required to confirm the system's reliability and robustness for clinical and research applications.

MQTree: Secure OTA Protocol Using MQTT and MerkleTree.

The escalating advancement in Software-Defined Vehicles (SDVs) necessitates a formidable strategy for firmware updates, where traditional methods often fall short of guaranteeing absolute integrity. Although decentralization has been explored in studies for firmware integrity verification using blockchain technology, it lacks comprehensive validation in the context of automotive over-the-air (OTA) updates. By recognizing the limitations of current practices and the partial validation of decentralized approaches, such as blockchain, in the automotive sector, our study introduces a novel mechanism for firmware over-the-air (FOTA) updates. This mechanism is grounded in the widely adopted message queuing telemetry transport (MQTT) protocol, integral to the Internet of Things (IoT) domain, and leverages Merkle tree-based blockchain verification to fortify the fidelity and efficiency of firmware updates. Our proposed solution not only prioritizes the stability crucial to automotive OTA updates but also ensures that performance is not compromised. This dual focus on reliability and efficiency represents a significant stride forward in the development of secure, scalable SDV firmware update protocols.

Enabling Seamless Connectivity: Networking Innovations in Wireless Sensor Networks for Industrial Application.

The wide-ranging applications of the Internet of Things (IoT) show that it has the potential to revolutionise industry, improve daily life, and overcome global challenges. This study aims to evaluate the performance scalability of mature industrial wireless sensor networks (IWSNs). A new classification approach for IoT in the industrial sector is proposed based on multiple factors and we introduce the integration of 6LoWPAN (IPv6 over low-power wireless personal area networks), message queuing telemetry transport for sensor networks (MQTT-SN), and ContikiMAC protocols for sensor nodes in an industrial IoT system to improve energy-efficient connectivity. The Contiki COOJA WSN simulator was applied to model and simulate the performance of the protocols in two static and moving scenarios and evaluate the proposed novelty detection system (NDS) for network intrusions in order to identify certain events in real time for realistic dataset analysis. The simulation results show that our method is an essential measure in determining the number of transmissions required to achieve a certain reliability target in an IWSNs. Despite the growing demand for low-power operation, deterministic communication, and end-to-end reliability, our methodology of an innovative sensor design using selective surface activation induced by laser (SSAIL) technology was developed and deployed in the FTMC premises to demonstrate its long-term functionality and reliability. The proposed framework was experimentally validated and tested through simulations to demonstrate the applicability and suitability of the proposed approach. The energy efficiency in the optimised WSN was increased by 50%, battery life was extended by 350%, duplicated packets were reduced by 80%, data collisions were reduced by 80%, and it was shown that the proposed methodology and tools could be used effectively in the development of telemetry node networks in new industrial projects in order to detect events and breaches in IoT networks accurately. The energy consumption of the developed sensor nodes was measured. Overall, this study performed a comprehensive assessment of the challenges of industrial processes, such as the reliability and stability of telemetry channels, the energy efficiency of autonomous nodes, and the minimisation of duplicate information transmission in IWSNs.

A Performance Analysis of Security Protocols for Distributed Measurement Systems Based on Internet of Things with Constrained Hardware and Open Source Infrastructures.

The widespread adoption of Internet of Things (IoT) devices in home, industrial, and business environments has made available the deployment of innovative distributed measurement systems (DMS). This paper takes into account constrained hardware and a security-oriented virtual local area network (VLAN) approach that utilizes local message queuing telemetry transport (MQTT) brokers, transport layer security (TLS) tunnels for local sensor data, and secure socket layer (SSL) tunnels to transmit TLS-encrypted data to a cloud-based central broker. On the other hand, the recent literature has shown a correlated exponential increase in cyber attacks, mainly devoted to destroying critical infrastructure and creating hazards or retrieving sensitive data about individuals, industrial or business companies, and many other entities. Much progress has been made to develop security protocols and guarantee quality of service (QoS), but they are prone to reducing the network throughput. From a measurement science perspective, lower throughput can lead to a reduced frequency with which the phenomena can be observed, generating, again, misevaluation. This paper does not give a new approach to protect measurement data but tests the network performance of the typically used ones that can run on constrained hardware. This is a more general scenario typical for IoT-based DMS. The proposal takes into account a security-oriented VLAN approach for hardware-constrained solutions. Since it is a worst-case scenario, this permits the generalization of the achieved results. In particular, in the paper, all OpenSSL cipher suites are considered for compatibility with the Mosquitto server. The most used key metrics are evaluated for each cipher suite and QoS level, such as the total ratio, total runtime, average runtime, message time, average bandwidth, and total bandwidth. Numerical and experimental results confirm the proposal's effectiveness in foreseeing the minimum network throughput concerning the selected QoS and security. Operating systems yield diverse performance metric values based on various configurations. The primary objective is identifying algorithms to ensure suitable data transmission and encryption ratios. Another aim is to explore algorithms that ensure wider compatibility with existing infrastructures supporting MQTT technology, facilitating secure connections for geographically dispersed DMS IoT networks, particularly in challenging environments like suburban or rural areas. Additionally, leveraging open firmware on constrained devices compatible with various MQTT protocols enables the customization of the software components, a crucial necessity for DMS.

MARAS: Mutual Authentication and Role-Based Authorization Scheme for Lightweight Internet of Things Applications.

The Internet of things (IoT) accommodates lightweight sensor/actuator devices with limited resources; hence, more efficient methods for known challenges are sought after. Message queue telemetry transport (MQTT) is a publish/subscribe-based protocol that allows resource-efficient communication among clients, so-called brokers, and servers. However, it lacks viable security features beyond username/password checks, yet transport-layer security (TLS/HTTPS) is not efficient for constrained devices. MQTT also lacks mutual authentication among clients and brokers. To address the issue, we developed a mutual authentication and role-based authorization scheme for lightweight Internet of things applications (MARAS). It brings mutual authentication and authorization to the network via dynamic access tokens, hash-based message authentication code (HMAC)-based one-time passwords (HOTP), advanced encryption standard (AES), hash chains, and a trusted server running OAuth2.0 along with MQTT. MARAS merely modifies "publish" and "connect" messages among 14 message types of MQTT. Its overhead to "publish" messages is 49 bytes, and to "connect" messages is 127 bytes. Our proof-of-concept showed that the overall data traffic with MARAS remains lower than double the traffic without it, because "publish" messages are the most common. Nevertheless, tests showed that round-trip times for a "connect" message (and its "ack") are delayed less than a percentile of a millisecond; for a "publish" message, the delays depend on the size and frequency of published information, but we can safely say that the delay is upper bounded by 163% of the network defaults. So, the scheme's overhead to the network is tolerable. Our comparison with similar works shows that while our communication overhead is similar, MARAS offers better computational performance as it offloads computationally intensive operations to the broker side.

Intelligent Hotel Guidance System via Face Recognition Technology.

In modern large hotels, due to a large number of rooms and complex layouts, it is difficult for customers to find rooms, which increases a lot of workloads for hotel attendants to guide. In this paper, a hotel intelligent guidance system based on face recognition is designed. After entering the customer's facial photos, the room guidance and customer management are carried out through face recognition. With this, hotels can move toward card-free management, green environmental protection, and save on resources. With these improvements, hotel management will be card-free and green. Each monitoring device of the system adopts dual STM32 core architecture, in which STM32H7 is responsible for face recognition, while STM32L4 is the main control chip, which is responsible for data exchange, guest room guidance and other work. The monitoring master not only guides, but also uploads customer check-in information to the cloud platform to facilitate the management of the hotel. The system adopts contactless information collection and guidance, which improves the intelligence and humanization of the hotel, and has a good application prospect.

Design and Implementation of a Framework for Smart Home Automation Based on Cellular IoT, MQTT, and Serverless Functions.

Smart objects and home automation tools are becoming increasingly popular, and the number of smart devices that each dedicated application has to manage is increasing accordingly. The emergence of technologies such as serverless computing and dedicated machine-to-machine communication protocols represents a valuable opportunity to facilitate management of smart objects and replicability of new solutions. The aim of this paper is to propose a framework for home automation applications that can be applied to control and monitor any appliance or object in a smart home environment. The proposed framework makes use of a dedicated messages-exchange protocol based on MQTT and cloud-deployed serverless functions. Furthermore, a vocal command interface is implemented to let users control the smart object with vocal interactions, greatly increasing the accessibility and intuitiveness of the proposed solution. A smart object, namely a smart kitchen fan extractor system, was developed, prototyped, and tested to illustrate the viability of the proposed solution. The smart object is equipped with a narrowband IoT (NB-IoT) module to send and receive commands to and from the cloud. In order to evaluate the performance of the proposed solution, the suitability of NB-IoT for the transmission of MQTT messages was evaluated. The results show how NB-IoT has an acceptable latency performance despite some minimal packet loss.

Validation of High-Availability Model for Edge Devices and IIoT.

Competitiveness in industry requires smooth, efficient, and high-quality operation. For some industrial applications or process control and monitoring applications, it is necessary to achieve high availability and reliability because, for example, the failure of availability in industrial production can have serious consequences for the operation and profitability of the company, as well as for the safety of employees and the surrounding environment. At present, many new technologies that use data obtained from various sensors for evaluation or decision-making require the minimization of data processing latency to meet the needs of real-time applications. Cloud/Fog and Edge computing technologies have been proposed to overcome latency issues and to increase computing power. However, industrial applications also require the high availability and reliability of devices and systems. The potential malfunction of Edge devices can cause a failure of applications, and the unavailability of Edge computing results can have a significant impact on manufacturing processes. Therefore, our article deals with the creation and validation of an enhanced Edge device model, which in contrast to the current solutions, is aimed not only at the integration of various sensors within manufacturing solutions, but also brings the required redundancy to enable the high availability of Edge devices. In the model, we use Edge computing, which performs the recording of sensed data from various types of sensors, synchronizes them, and makes them available for decision making by applications in the Cloud. We focus on creating a suitable Edge device model that works with the redundancy, by using either mirroring or duplexing via a secondary Edge device. This enables high Edge device availability and rapid system recovery in the event of a failure of the primary Edge device. The created model of high availability is based on the mirroring and duplexing of the Edge devices, which support two protocols: OPC UA and MQTT. The models were implemented in the Node-Red software, tested, and subsequently validated and compared to confirm the required recovery time and 100% redundancy of the Edge device. In the contrast to the currently available Edge solutions, our proposed extended model based on Edge mirroring is able to address most of the critical cases, where fast recovery is required, and no adjustments are needed for critical applications. The maturity level of Edge high availability can be further extended by applying Edge duplexing for process control.

The Cryptographic Key Distribution System for IoT Systems in the MQTT Environment.

The Internet of Things (IoT) is a very abundant source of data, as well as a source of many vulnerabilities. A significant challenge is preparing security solutions to protect IoT nodes' resources and the data exchanged. The difficulty usually stems from the insufficient resources of these nodes in terms of computing power, memory size, range energy resource, and wireless link performance. The paper presents the design and demonstrator of a system for symmetric cryptographic Key Generating, Renewing, and Distributing (KGRD). The system uses the TPM 2.0 hardware module to support cryptographic procedures, including creating trust structures, key generation, and securing the node's exchange of data and resources. Clusters of sensor nodes and traditional systems can use the KGRD system to secure data exchange in the federated cooperation of systems with IoT-derived data sources. The transmission medium for exchanging data between KGRD system nodes is the Message Queuing Telemetry Transport (MQTT) service, which is commonly used in IoT networks.

Bluetooth-Based Healthcare Information and Medical Resource Management System.

This paper presents a healthcare information and medical resource management platform utilizing wearable devices, physiological sensors, and an indoor positioning system (IPS). This platform provides medical healthcare information management based on the physiological information collected by wearable devices and Bluetooth data collectors. The Internet of Things (IoT) is constructed for this medical care purpose. The collected data are classified and used to monitor the status of patients in real time with a Secure MQTT mechanism. The measured physiological signals are also used for developing an IPS. When the patient is out of the safety zone, the IPS will send an alert message instantly by pushing the server to remind the caretaker, easing the caretaker's burden and offering extra protection for the patient. The presented system also provides medical resource management with the help of IPS. The medical equipment and devices can be tracked by IPS to tackle some equipment rental problems, such as lost and found. A platform for the medical staff work coordination information exchange and transmission is also developed to expedite the maintenance of medical equipment, providing the shared medical information to healthcare and management staff in a timely and transparent manner. The presented system in this paper will finally reduce the loading of medical staff during the COVID-19 pandemic period.

A Secure IoT-Based Irrigation System for Precision Agriculture Using the Expeditious Cipher.

Due to the recent advances in the domain of smart agriculture as a result of integrating traditional agriculture and the latest information technologies including the Internet of Things (IoT), cloud computing, and artificial intelligence (AI), there is an urgent need to address the information security-related issues and challenges in this field. In this article, we propose the integration of lightweight cryptography techniques into the IoT ecosystem for smart agriculture to meet the requirements of resource-constrained IoT devices. Moreover, we investigate the adoption of a lightweight encryption protocol, namely, the Expeditious Cipher (X-cipher), to create a secure channel between the sensing layer and the broker in the Message Queue Telemetry Transport (MQTT) protocol as well as a secure channel between the broker and its subscribers. Our case study focuses on smart irrigation systems, and the MQTT protocol is deployed as the application messaging protocol in these systems. Smart irrigation strives to decrease the misuse of natural resources by enhancing the efficiency of agricultural irrigation. This secure channel is utilized to eliminate the main security threat in precision agriculture by protecting sensors' published data from eavesdropping and theft, as well as from unauthorized changes to sensitive data that can negatively impact crops' development. In addition, the secure channel protects the irrigation decisions made by the data analytics (DA) entity regarding the irrigation time and the quantity of water that is returned to actuators from any alteration. Performance evaluation of our chosen lightweight encryption protocol revealed an improvement in terms of power consumption, execution time, and required memory usage when compared with the Advanced Encryption Standard (AES). Moreover, the selected lightweight encryption protocol outperforms the PRESENT lightweight encryption protocol in terms of throughput and memory usage.

Comparative Analysis of Power Consumption between MQTT and HTTP Protocols in an IoT Platform Designed and Implemented for Remote Real-Time Monitoring of Long-Term Cold Chain Transport Operations.

IoT platforms for the transportation industry are portable with limited battery life and need real-time and long-term monitoring operations. Since MQTT and HTTP are widely used as the main communication protocols in the IoT, it is imperative to analyze their power consumption to provide quantitative results that help maximize battery life in IoT transportation systems. Although is well known that MQTT consumes less power than HTTP, a comparative analysis of their power consumption with long-time tests and different conditions has not yet been conducted. In this sense, a design and validation of an electronic cost-efficient platform system for remote real-time monitoring is proposed using a NodeMCU module, in which experimentation is carried out for HTTP and MQTT with different QoS levels to make a comparison and demonstrate the differences in power consumption. Furthermore, we characterize the behavior of the batteries in the systems and compare the theoretical analysis with real long-time test results. The experimentation using the MQTT protocol with QoS 0 and 1 was successful, resulting in power savings of 6.03% and 8.33%, respectively, compared with HTTP, demonstrating many more hours in the duration of the batteries, which could be very useful in technological solutions for the transport industry.

MA-RTI: Design and Evaluation of a Real-World Multipath-Assisted Device-Free Localization System.

Device-free localization (DFL) systems exploit changes in the radio frequency channel by measuring, for example, the channel impulse response (CIR), to detect and localize obstacles within a target area. However, due to a lack of well-defined interfaces, missing modularization, as well as complex system configuration, it is difficult to deploy DFL systems outside of laboratory setups. This paper focused on the system view and the challenges that come with setting up a DFL system in an indoor environment. We propose MA-RTI, a modular DFL system that is easy to set up, and which utilizes a multipath-assisted (MA) radio-tomographic imaging (RTI) algorithm. To achieve a modular DFL system, we proposed and implemented an architectural model for DFL systems. For minimizing the configuration overhead, we applied a 3D spatial model, that helps in placing the sensors and calculating the required calibration parameters. Therefore, we configured the system solely with idle measurements and a 3D spatial model. We deployed such a DFL system and evaluated it in a real-world office environment with four sensor nodes. The radio technology was ultra-wideband (UWB) and the corresponding signal measurements were CIRs. The DFL system operated with CIRs that provided a sub-nanosecond time-domain resolution. After pre-processing, the update rate was approximately 46 Hz and it provided a localization accuracy of 1.0 m in 50% of all cases and 1.8 m in 80% of all cases. MA fingerprinting approaches lead to higher localization accuracy, but require a labor-intensive training phase.

Cloud Based Fault Diagnosis by Convolutional Neural Network as Time-Frequency RGB Image Recognition of Industrial Machine Vibration with Internet of Things Connectivity.

The human-centric and resilient European industry called Industry 5.0 requires a long lifetime of machines to reduce electronic waste. The appropriate way to handle this problem is to apply a diagnostic system capable of remotely detecting, isolating, and identifying faults. The authors present usage of HTTP/1.1 protocol for batch processing as a fault diagnosis server. Data are sent by microcontroller HTTP client in JSON format to the diagnosis server. Moreover, the MQTT protocol was used for stream (micro batch) processing from microcontroller client to two fault diagnosis clients. The first fault diagnosis MQTT client uses only frequency data for evaluation. The authors' enhancement to standard fast Fourier transform (FFT) was their usage of sliding discrete Fourier transform (rSDFT, mSDFT, gSDFT, and oSDFT) which allows recursively updating the spectrum based on a new sample in the time domain and previous results in the frequency domain. This approach allows to reduce the computational cost. The second approach of the MQTT client for fault diagnosis uses short-time Fourier transform (STFT) to transform IMU 6 DOF sensor data into six spectrograms that are combined into an RGB image. All three-axis accelerometer and three-axis gyroscope data are used to obtain a time-frequency RGB image. The diagnosis of the machine is performed by a trained convolutional neural network suitable for RGB image recognition. Prediction result is returned as a JSON object with predicted state and probability of each state. For HTTP, the fault diagnosis result is sent in response, and for MQTT, it is send to prediction topic. Both protocols and both proposed approaches are suitable for fault diagnosis based on the mechanical vibration of the rotary machine and were tested in demonstration.

Adaptive Quality of Service Control for MQTT-SN.

Internet of Things and wireless sensor network applications are becoming more and more popular these days, supported by new communication technologies and protocols tailored to their specific requirements. This paper focuses on improving the performance of a Wireless Sensor Network operated by the MQTT-SN protocol, one of the most popular publish/subscribe protocols for IoT applications. In particular, we propose a dynamic Quality of Service (QoS) controller for the MQTT-SN protocol, capable of evaluating the status of the underlying network in terms of end-to-end delay and packet error rate, reacting consequently by assigning the best QoS value to a node. We design and implement the QoS controller in a simulated environment based on the ns-3 network emulator, and we perform extensive experiments to prove its effectiveness compared to a non-controlled scenario. The reported results show that, by controlling the quality of service, it is possible to effectively manage the number of packets successfully received by each device and their average latency, to improve the quality of the communication of each end node.

Assertive, Selective, Scalable IoT-Based Warning System.

With the evolution of technology, developed systems have become more complex and faster. Thirty years ago, there were no protocols or databases dedicated to developing and implementing IoT projects. We currently have protocols such as MQTT, AMQP, CoAP, and databases such as InfluxDB. They are built to support a multitude of data from an IoT system and scale very well with the system. This paper presents the design and implementation of an IoT alert system that uses MQTT and InfluxDB to collect and store data. We design a scalable system to display assertive alerts on a Raspberry Pi. Each user can select a subset of alerts in our system using a web interface. We present a bibliographic study of SoTA, the proposed architecture, the challenges posed by such a system, a set of tests for the performance and feasibility of the solution, and a set of conclusions and ideas for further developments.

Extending MQTT with Real-Time Communication Services Based on SDN.

MQTT is one of the most popular application-layer protocols used in the scope of the Internet-of-Things (IoT) and Industrial-Internet-of-Things (IIoT), given its suitability for resource-constrained embedded systems. However, MQTT Quality-of-Service policies do not support timeliness requirements, which is common in IIoT. The literature reports several research works that address this limitation, but they are limited in scope (e.g., improvements in the broker's internal operation, control of the publisher's data rate, and path optimizations). Conversely, this paper presents a comprehensive architectural approach, proposing a set of extensions to the MQTT protocol that allow applications to explicitly specify real-time requirements and instantiate corresponding network reservations to enforce the desired temporal behavior. Such reservations are enforced via Software Defined Networking, specifically the OpenFlow protocol, but other protocols that allow bandwidth reservations, e.g., TSN, can also be used. This paper presents the proposed system architecture together with extensive emulation and implementation results that validate the feasibility of the approach, showing that time-sensitive MQTT traffic can be effectively segregated and prioritized to meet application-defined real-time requirements. Using several combinations of network topologies and load levels and comparing to the absence of the proposed real-time mechanisms, both average and worst-case latencies of the time-sensitive traffic decreased to approximately half, while for the normal traffic, they increased by approximately 10%.

Mathematical Modeling and Validation of Retransmission-Based Mutant MQTT for Improving Quality of Service in Developing Smart Cities.

Unreliable networks often use excess bandwidth for data integration in smart cities. For this purpose, Messaging Queuing Telemetry Transport (MQTT) with a certain quality of service (QoS) is employed. Data integrity and data security are frequently compromised for reducing bandwidth usage while designing integrated applications. Thus, for a reliable and secure integrated Internet of Everything (IoE) service, a range of network parameters are conditioned to achieve the required quality of a deliverable service. In this work, a QoS-0-based MQTT is developed in such a manner that the transparent MQTT protocol uses Transmission Control Protocol (TCP)-based connectivity with various rules for the retransmission of contents if the requests are not entertained for a fixed duration. The work explores the ways to improve the overall content delivery probability. The parameters are examined over a transparent gateway-based TCP network after developing a mathematical model for the proposed retransmission-based mutant QoS-0. The probability model is then verified by an actual physical network where the repeated content delivery is explored at VM-based MQTT, local network-based broker and a remote server. The results show that the repeated transmission of contents from the sender improves the content delivery probability over the unreliable MQTT-based Internet of Things (IoT) for developing smart cities' applications.

Design and Implementation of SEMAR IoT Server Platform with Applications.

Nowadays, rapid developments of Internet of Things (IoT) technologies have increased possibilities of realizing smart cities where collaborations and integrations of various IoT application systems are essential. However, IoT application systems have often been designed and deployed independently without considering the standards of devices, logics, and data communications. In this paper, we present the design and implementation of the IoT server platform called Smart Environmental Monitoring and Analytical in Real-Time (SEMAR) for integrating IoT application systems using standards. SEMAR offers Big Data environments with built-in functions for data aggregations, synchronizations, and classifications with machine learning. Moreover, plug-in functions can be easily implemented. Data from devices for different sensors can be accepted directly and through network connections, which will be used in real-time for user interfaces, text files, and access to other systems through Representational State Transfer Application Programming Interface (REST API) services. For evaluations of SEMAR, we implemented the platform and integrated five IoT application systems, namely, the air-conditioning guidance system, the fingerprint-based indoor localization system, the water quality monitoring system, the environment monitoring system, and the air quality monitoring system. When compared with existing research on IoT platforms, the proposed SEMAR IoT application server platform offers higher flexibility and interoperability with the functions for IoT device managements, data communications, decision making, synchronizations, and filters that can be easily integrated with external programs or IoT applications without changing the codes. The results confirm the effectiveness and efficiency of the proposal.