Risk of bladder, kidney and prostate cancer from occupational exposure to welding fumes: a systematic review and meta-analysis.

BACKGROUND: Our aimed to conduct a meta-analysis of cohort studies on risk of genitourinary (GU) cancers in workers exposed to welding fumes (WF). METHODS: We performed a systematic review of studies published on Pubmed, Scopus and Embase following PRISMA criteria. Two researchers selected cohort studies on WF exposure. From 2582 articles, 7 non-overlapping studies were included. Quality of studies was scored according to CASP. We run a random effects meta-analysis to calculate the relative risk (RR) and 95% confidence intervals (CI) of GU cancer, overall and stratified by cancer, country, and quality score. RESULTS: We included seven studies reporting results on GU cancers, including prostate, bladder and kidney cancer (PC, BC, and KC). The RR was 1.19 (95% CI = 1.07-1.32, 16 risk estimates) for GU cancer; 1.13 (95% CI = 0.90-1.42, 4 risk estimates) for PC; 1.26 (95% CI = 0.98-1.60, 7 risk estimates) for BC and 1.28 (95% CI = 1.12-1.47, 5 risk estimates) for KC. Heterogeneity was present in all meta-analyses (p < 0.001). The increased risk was more pronounced in North American than in European studies (respectively, OR = 1.35, 95% CI = 1.18-1.55; OR = 1.13, 95% CI = 1.01-1.27 p heterogeneity = 0.03). There was no heterogeneity according to quality score (p = 0.4). Data were insufficient to investigate associations by industry or welding type. Publication bias for each cancer was excluded. CONCLUSION: This meta-analysis suggests increased risk of KC and BC, but not of PC, in workers exposed to WF. Confounding by other occupational and non-occupational risk factors could not be excluded. Data were not adequate to address the risk of specific exposure circumstances.

Data Clustering Utilization Technologies Using Medians of Current Values for Improving Arc Sensing in Unstructured Environments.

In the shipbuilding industry, welding automation using welding robots often relies on arc-sensing techniques due to spatial limitations. However, the reliability of the feedback current value, core sensing data, is reduced when welding target workpieces have significant curvature or gaps between curved workpieces due to the control of short-circuit transition, leading to seam tracking failure and subsequent damage to the workpieces. To address these problems, this study proposes a new algorithm, MBSC (median-based spatial clustering), based on the DBSCAN (density-based spatial clustering of applications with noise) clustering algorithm. By performing clustering based on the median value of data in each weaving area and considering the characteristics of the feedback current data, the proposed technique utilizes detected outliers to enhance seam tracking accuracy and responsiveness in unstructured and challenging welding environments. The effectiveness of the proposed technique was verified through actual welding experiments in a yard environment.

Levels and control of welding fume exposure to total particulate, hexavalent chromium, and manganese in contracted activities in an oil refinery setting (2008-2018).

In response to increasing focus on occupational exposures to welding fume, a 10-year series of personal exposure measurements was analyzed for the two main welding processes (Shielded Metal Arc Welding or Stick and Tungsten Inert Gas welding or TIG) used in an oil refinery setting. Exposures from ancillary gouging and grinding were also analyzed. The operations were conducted under a permit-to-work system, which stipulated control measures in the form of ventilation and respiratory protective equipment (RPE) depending on the work environment, base metal, and welding process. The analysis focused on three health hazards of interest: total particulate (TP); hexavalent chromium (Cr (VI)); and manganese (Mn). The study's aims were the analysis of exposure levels related to operational conditions to verify the adequacy of required control measures and the generation of quantitative information for the development of predictive exposure models. Arithmetic mean exposures were 2.01 mg/m3 for TP (n = 94), 13.86 µg/m3 for Cr (VI) (n = 160), and 0.024 mg/m3 for Mn (n = 95). Requirements and practices for ventilation and use of RPE appeared adequate for maintaining exposure levels below maximum use concentrations. Predictive models for mean exposure levels were developed using multiple linear regression. Different patterns emerged for TP, Cr (VI), and Mn exposure determinants. Enclosed or confined work environments were associated with elevated exposure levels, regardless of the provision of local exhaust or general dilution ventilation. Carbon arc, used with gouging and grinding, contributed significantly to TP exposure (p = 0.006). The relative TP source strengths of the two main welding processes were comparable to the literature data. For Cr (VI), stick welding was associated with approximately 50-fold (p < 0.001) higher exposure potential than TIG welding. For Mn, this difference was approximately 2.5-fold. Differences were observed across the three analytes in exposure reduction efficiency of local exhaust ventilation (LEV) compared to natural ventilation, possibly due to ineffective use in confined spaces. These findings contribute to the overall understanding of TP, Cr (VI), and Mn exposures from welding and required controls in an oil refinery setting.

[Analysis of disease burden of welder's pneumoconiosis in Jiangsu Province].

Objective: To investigate the current status of disease burden and its influencing factors among welder's pneumoconiosis patients, and provide scientific basis for taking targeted intervention measures. Methods: From June 2022 to June 2023, the patients with welder's pneumoconiosis in Jiangsu Province were selected from 1956 to 2020 as the research objects, and disability adjusted life years (DALY) were used as the comprehensive index to study the disease burden. The direct and indirect economic losses caused by the diseases were calculated, and the factors affecting the disease burden were discussed by multiple linear regression method. Results: A total of 974 cases of welder's pneumoconiosis were reported in Jiangsu Province, the cumulative loss of DALY was 6300.73 person-years, and the per capita loss was 6.47 person-years. Among them, the healthy life years lost due to disability (YLD) was 6156.50 person-years (97.71%) , and the healthy life years lost due to premature death (YLL) was 144.23 person-years (2.29%) . Multiple linear regression analysis showed that the main factors affecting DALY were disability grade, diagnostic age, pneumoconiosis grade and length of dust exposure (P<0.05) . The total economic loss caused by 974 welder's pneumoconiosis patients was 1831838160.18 yuan, and the per capita loss was 1880737.33 yuan. Among them, the direct economic loss was 970917563.75 yuan (53.00%) , and the indirect economic loss was 860920596.43 yuan (47.00%) . Conclusion: Welder's pneumoconiosis causes serious disease burden to patients, and at the same time causes huge economic losses to individuals and society, which seriously hinders the development of society. Taking effective control measures to prevent the incidence of welder's pneumoconiosis is the key to reduce the disease burden.

Welder's Anthrax: A Tale of 2 Cases.

Bacillus anthracis has traditionally been considered the etiologic agent of anthrax. However, anthrax-like illness has been documented in welders and other metal workers infected with Bacillus cereus group spp. harboring pXO1 virulence genes that produce anthrax toxins. We present 2 recent cases of severe pneumonia in welders with B. cereus group infections and discuss potential risk factors for infection and treatment options, including antitoxin.

Lifetime Exposure to Welding Fumes and Risk of Some Rare Cancers.

We investigated the association between exposure to welding fumes and the risk of biliary tract, male breast, bone, and thymus cancer, as well as cancer of the small intestine, eye melanoma, and mycosis fungoides, among men in a European, multicenter case-control study. From 1995-1997, 644 cases and 1,959 control subjects from 7 countries were studied with respect to information on welding and potential confounders. We linked the welding histories of the participants with a measurement-based exposure matrix to calculate lifetime exposure to welding fumes. Odds ratios (ORs) and 95% confidence intervals (CIs) were estimated using logistic regression models, conditional on country and 5-year age groups, and adjusted for education and relevant confounders. Regular welding was associated with an increased risk of cancer of the small intestine (OR = 2.30, 95% CI: 1.17, 4.50). Lifetime exposure to welding fumes above the median of exposed controls was associated with an increased risk of cancer of the small intestine (OR = 2.00, 95% CI: 1.07, 3.72) and male breast (OR = 2.07, 95% CI: 1.14, 3.77), and some elevation in risk was apparent for bone cancer (OR = 1.92, 95% CI: 0.85, 4.34) with increasing lifetime exposure to welding fumes. Welding fumes could contribute to an increased risk of some rare cancers.

[Neck musculoskeletal disorders and their influence factors among welders in an automobile factory].

Objective: To explore the prevalence and risk factors of neck musculoskeletal diseases (MSDs) of welders among an automobile factory. Methods: In June 2019, a cluster random sampling method was used to select 677 electric welders from an automobile manufacturing plant in Shiyan City as the survey objects, and a questionnaire survey was conducted using the "Musculoskeletal Disorders Questionnaire" to analyze the prevalence and influencing factors of neck MSDs, and used logistic regression to analyze the relationship between the influencing factors and the prevalence of cervical MSDs. Results: The prevalence rate of MSDs in neck of welders was 54.8% (371/677) . The exposure rate of occupational factors, from high to low, were neckin a bent formord porsure was 71.6% (486/677) , repetitive head movements was 55.1% (373/677) , working in uncomfortable postures was 48.7% (330/677) and neck twisted was 46.8% (317/677) respectively. Sex, age, educational level, length of service, smoking, neck tilt, neck twist, working in uncomfortable posture and head repetitive movements were the risk factors of neck MSDs (P<0.05) . Multiple logistic regression analysis showed that, the main influencing factors of neck MSDs were sex, education level, age, length of service, smoking, neck tilt, working in uncomfortable posture (OR = 2.11, 2.03, 1.83, 1.21, 1.78, 1.90, 1.58, 95%CI: 1.28~3.48、1.47~2.81、1.33~2.52、1.03~1.41、1.22~2.60、1.28~2.83、1.11~2.27, P<0.05) , rest had protective effect on neck MSDs (OR= 0.38, 95%CI: 0.17~0.88, P<0.05) . Conclusion: Welders in automobile factory was highly exposed to occupational risk factors for neck MSDs. Occupational risk factors such as neck in a bent forward posture, working in an uncomfortable posture, prolonged siting, repetitive head movement should be the focus of intervention.

Prolonged exposure to welding fumes as a novel cause of systemic iron overload.

BACKGROUND & AIMS: Inhalation of welding fume may cause pulmonary disease known as welder's lung. At our centre we came across a number of welders with systemic iron overload and prolonged occupational history and we aimed at characterizing this novel clinical form of iron overload. METHODS: After exclusion of other known causes of iron overload, 20 welders were fully evaluated for working history, hepatic, metabolic and iron status. MRI iron assessment was performed in 19 patients and liver biopsy in 12. We included 40 HFE-HH patients and 24 healthy controls for comparison. RESULTS: 75% of patients showed lung HRCT alterations; 90% had s-FERR > 1000 ng/mL and 60% had TSAT > 45%. Liver iron overload was mild in 8 and moderate-severe in 12. The median iron removed was 7.8 g. Welders showed significantly lower TSAT and higher SIS and SIS/TIS ratio than HFE-HH patients. Serum hepcidin was significantly higher in welders than in HFE-HH patients and healthy controls. At liver biopsy, 50% showed liver fibrosis that was mild in four, and moderate-severe in two. Liver staging correlated with liver iron overload. CONCLUSIONS: Welders with prolonged fume exposure can develop severe liver iron overload. The mechanism of liver iron accumulation is quite different to that of HFE-HH suggesting that reticuloendothelial cells may be the initial site of deposition. We recommend routine measurement of serum iron indices in welders to provide adequate diagnosis and therapy, and the inclusion of prolonged welding fume exposure in the list of acquired causes of hyperferritinemia and iron overload.

[A retrospective investigation of new cases of pneumoconiosis from 1958 to 2018 in Guangzhou City].

Objective: To describe the characteristics and the survival status of pneumoconiosis cases reported in Guangzhou City from 1958 to 2018, and to investigate the epidemiological trends of pneumoconiosis. This study is aiming to provide basic data for formulating the guidelines and policies for control of pneumoconiosis, and for evaluating the control effects of pneumoconiosis. Methods: From July 2019 to January 2020, based on the data collected in the pneumoconiosis case cards and database as well as the retrospective follow-up investigate of pneumoconiosis cases, we conducted a descriptive analysis for all the new cases of pneumoconiosis reported from 1958 to 2018 in Guangzhou City. The statistical indices included the number of new pneumoconiosis cases in each decade, types of pneumoconiosis, regional and industrial distributions, survival status, and the change tendency of the diagnosis age and the dust exposure time of pneumoconiosis cases. Results: From 1958 to 2018, a total of 1194 new cases of pneumoconiosis were reported in Guangzhou City, including 1147 males (96.1%) and 47 females (3.9%) . Silicosis (60.1%, 718/1194) and welder's pneumoconiosis (21.5%, 257/1194) were the main types of pneumoconiosis. The top three districts for reporting new cases were Huangpu District (29.0%, 346/1194) , Nansha District (12.6%, 151/1194) and Baiyun District (11.1%, 132/1194) , respectively. The top three industries for reporting new cases were civil engineering construction industry (25.0%, 298/1194) , railway ship aerospace and other transportation equipment manufacturing industry (16.1%, 192/1194) and non-metal mining industry (15.7%, 187/1194) . The diagnosis age for new cases was 47.8 (23.6-79.1) years old, and the dust exposure time was 12.3 (0.4-49.1) years. Both of these two statistical indicators rose first and fell later from 1958 to 2018. As of December 31, 2019, a total of 963 new cases of pneumoconiosis were followed up, of which 467 (48.5%) survived, mainly silicosis (41.3%, 193/467) and welder's pneumoconiosis (43.3%, 203/467) . 496 cases (51.5%) died, and the age of death was 69.9 (32.4-96.9) years old. Conclusion: According to the epidemiological characteristics of pneumoconiosis in Guangzhou, we should focus on key districts and industries in the prevention and control of pneumoconiosis. Besides, the staffs in the occupational disease diagnosis institutions should try the best to collect the complete dust exposure data of new cases of pneumoconiosis. Moreover, the health administrative departments should pay more attention to the management of pneumoconiosis death case reports.

[The effect of welding ultraviolet on the antioxidant function and DNA of workers].

Objective: To explore the skin damage, oxidative damage and DNA damage of welding workers caused by ultra violet. Methods: From 1 May to 30 June 2017, 125 welding workers were selected as the contact group, which was divided into 2, 4, 6, 8 and 10-year-working age groups with 25 workers in each group and 25 healthy volunteers as the control group. The workers in the contact group were investigated with questionnaires on the distribution and wearing of protective equipment; the subjects in the two groups were examined in dermatology, and the peripheral blood was collected to detect the total antioxidant capacity (T-AOC) and DNA damage of mononuclear cells, and the influence of ultraviolet on the above indexes was analyzed. Results: The distribution rates of welding mask, dust mask and goggles were 100.0% (125/125) , 96.0% (120/125) , 98.4% (123/125) , respectively, and the distribution rates of welding gloves were 64.8% (81/125) ; the wearing rates of welding mask and goggles were 100.0% (125/125) , 90.4% (113/125) , and the wearing rates of dust mask and welding gloves were 89.6% (112/125) and 64.0% (80/125) , respectively. The acute skin injuries such as hand and face peeling and skin pruritus were serious in the 2-year-working age group, and the chronic skin injuries such as insensitive and numbness and verrucous vegetations were the main manifestations in the 10-year-working age group. Compared with the control group, T-AOC in peripheral blood of workers exposed to 6, 8 and 10 years decreased significantly, and DNA content in comet tail of workers exposed to various working years increased significantly (P<0.05) , while DNA content in comet tail increased with working years (F=1501.130, P<0.05) . Conclusion: UV welding can cause skin damage, reduce the antioxidant capacity of the body, and increase DNA damage with the increase of working age.

Pneumococcal vaccination for welders: Global deployment within a multi-national corporation.

BACKGROUND: Lobar pneumonia is an occupational disease of welders. This is the first report of global deployment of a pneumococcal vaccination program for welders within a multi-national corporation. METHODS: Global webinars were conducted to introduce the program. Communication packages translated into all location languages were deployed. All employee welders who had not previously been vaccinated were offered a free single dose of pneumococcal polysaccharide vaccine (PPV23) by on-site location medical centers during normal working hours. Numbers of vaccinated welders were reported by each location each month. RESULTS: Twelve months after starting the program, 241 of 767 welders have been vaccinated (31%) across six countries. CONCLUSIONS: Global deployment of pneumococcal vaccination for welders can be successfully undertaken by a multi-national corporation. Adoption of this practice by corporations could reduce the incidence and mortality of pneumonia among welders globally.

Exposure to heavy metals alters the surface topology of alveolar macrophages and induces respiratory dysfunction among Indian metal arc-welders.

BACKGROUND: Despite the available clinico-epidemiological evidence of heavy metal-associated respiratory health hazards among metal arc-welders, experimental confirmation of such an association is lacking. METHODS: In this study, we recruited 15 metal arc-welders and 10 referent workers without direct exposure. We assessed respiratory health through a questionnaire and spirometry; estimated manganese, nickel and cadmium levels in blood, urine and induced sputum; performed differential counts of sputum leucocytes and measured plasma malondialdehyde (MDA). We used atomic force and scanning electron microscopy to assess the physical property of the alveolar macrophages (AMs) obtained from induced sputum and analysed cell surface deposition of heavy metals using energy dispersion X-ray analysis (EDX). Sputum cellular DNA damage was assessed by DNA-laddering assay. RESULTS: There was a higher body burden of manganese and nickel in the metal arc-welders than the referents. Among major spirometric indices, only the forced mid-expiratory flow rates (FEF25-75) were reduced in the welders compared with the referents (63.4 ± 14.7 vs. 89.2 ± 26.7, p < 0.01); this reduction was associated with both heavy metal levels (ß: -41.8, 95% CI: -78.5% to -5.1%) and plasma MDA (-0.37; -0.68 to -0.06). In metal arc-welders, significant physical and morphological changes were observed in AMs through microscopic evaluation while EDX analyses demonstrated higher deposition of heavy metals on the AM cell surface than the referents. We also observed a higher degree of DNA damage in the sputum cells of the exposed workers than the referents. CONCLUSION: Heavy metal exposure-induced adverse respiratory effects among metal arc-welders are mediated through haematological and cytological interactions.

Metal arc welding and the risk of skin cancer.

OBJECTIVES: Arc welding produces the full spectrum of ultraviolet radiation and may be a contributory cause of skin cancer; however, there has been little research into this occupational hazard. The aim of this study is to explore if metal arc welding increases the risk of malignant melanoma and/or basal cell carcinoma (BCC) and squamous cell carcinoma (SCC) on skin areas which may possibly be exposed (neck, head, and upper extremities). METHOD: A Danish national company-based historic cohort of 4333 male metal arc welders was followed from 1987 through 2012 to identify the risk of skin cancer. An external reference group was established including all Danish skilled and unskilled male workers with similar age distribution. Occupational histories were gathered by questionnaires in 1986 and information about skin cancer diagnoses [BCC, SCC, cutaneous malignant melanoma (CMM), and precancerous conditions, actinic keratosis (AK)] were gathered from the Danish Cancer Registry supplemented by the data from the Danish Pathology Register. Hazard ratios (HRs) were calculated in the follow-up period from 1987 until 2012 using Cox regression analysis and adjusted for baseline data regarding age and social group. RESULTS: The adjusted HR and 95% confidence interval (CI) for skin cancer (all types) were 0.99 (CI 0.94-1.04) for welders. The adjusted HR for AK and BCC located only at neck was 2.49 (CI 1.03-5.99) for welders exposed >20 years (n = 5) and 2.46 (CI 1.02-5.94), respectively, for welders exposed >30 years (n = 5). No statistically significant difference was observed for SCC. The risk of CMM at the neck was also significantly elevated after 30 years of welding, but this is based upon only one exposed case. CONCLUSION: This study indicates that long-term exposure to metal arc welding may be related to increased risk of BCC and AK located exclusively at the neck. The study provides no support for the hypothesis that welding exposure increases the risk for skin cancer at other locations.

Welding fume exposure and chronic obstructive pulmonary disease in welders.

BACKGROUND: Occupational exposure is estimated to contribute 15% to the burden of chronic obstructive pulmonary disease (COPD). Welding fumes are suspected to accelerate the decline of lung function and development of COPD. AIMS: To examine the relationship between welding fume exposure and COPD in Korean shipyard welders. METHODS: The study involved a group of male welders working at two shipyards who underwent an annual health examination in 2010. Subjects completed a questionnaire about smoking habits and occupational history and a pulmonary function test (PFT) was carried out with strict quality control measures. Welding fume exposure concentrations were estimated using 884 measurements taken between 2002 and 2009 in one of the shipyards. Multiple linear and logistic regression was employed to evaluate the association between cumulative fume exposure and lung function parameters, controlling for age, height and cigarette smoking. RESULTS: Two hundred and forty subjects participated, with a mean age of 48 and mean work duration of 15 years. The mean cumulative fume exposure was 7.7mg/m(3). The prevalence of COPD was 15%. FEV1 and FVC showed non-significant negative correlations with cumulative fume exposure. Odds ratios of COPD were significantly elevated for the middle (3.9; 95% CI 1.4-13.3) and high exposure groups (3.8; 95% CI 1.03-16.2) compared with the low fume exposure group. CONCLUSIONS: Our findings support an association between welding fume exposure and increased risk of COPD. Further prospective study is needed to investigate whether this is a causal relationship.

Manganism due to occupational welding fume exposure: a case report.

Occupational exposure to manganese (Mn) primarily occurs through the inhalation of manganese-containing fumes and dust, with welding environments being significant sources of such exposure. Elevated levels of Mn in welding fumes can lead to a neurological syndrome known as manganism. A 28-yr-old male welder with 14 yr of experience, is presenting with complaints of forgetfulness, reasoning disorder, and decreased mental functions persisting for 10 yr. Three months ago, when he started working at the new workplace, he underwent employment screening conducted by the workplace physician. During this screening process, the physician identified a high whole blood Mn level of 25.9 µg/l. The diagnosis of manganism in this patient was established based on exposure to Mn and its compounds, high levels of Mn detected in the whole blood, hyperactive patellar reflexes observed during the physical examination, cranial Magnetic Resonance Imaging (MRI) findings consistent with manganism and complaints reported by the patient that are characteristic of manganism. In this report, the aim is to emphasize the significance of taking a comprehensive occupational history and to draw attention the potential health hazards associated with Mn and its compounds.

Serum zinc levels and body composition variability as trajectory for hyperlipidemic and dyslipidemic effect among welders exposed to welding fumes and smoking: A biomarker for cardiovascular health.

Welding is a common method for joining metals by heating them to the welding temperature. Exposure to welding fumes has a serious effect on the health of welders. This study examined serum zinc variability and body composition as route for hyperlipidemia and dyslipidemia in welders exposed to welding fumes and smoking, exploring the possibilities for the risk of possible cardiovascular disease. The experimental case control design was adopted in the study. Forty apparently healthy adult males were randomly selected comprising of twenty control group (non-smokers and smokers without welding experience) and twenty experimental group (non-smokers and smokers with welding experience) welders. Data obtained were represented as Mean ± SEM while comparison of means across group was done by one-way ANOVA followed by Tukey's multiple comparison for post hoc test at p-value < 0.05 level of significance using Graph Pad prism version 8. The data obtained showed that the body mass index (BMI) of smokers (non-welders and welders) were slightly reduced while that of non-smoking welders was increased compared to the control. The serum zinc level increased among the smoking welders, while the smoking non-welders and non-smoking welders decreased when compared to the control group (p < 0.05). Exposure to welding fumes has been shown to increase total cholesterol levels compared to the control. Weld fumes significantly (p < 0.05) increased high-density lipoproteins (HDL) levels among smoking non-welders compared to the control group, while, HDL was reduced in non-smoking welders and smoking welders, respectively (p < 0.05). Triglyceride levels significantly (p < 0.05) increased in all experimental groups compared to control levels (p < 0.05). Exposure to welding fumes and smoking caused significant changes in serum zinc, HDL and triglycerides levels with implications for the formation of plaques around the arteries interfering with the effective flow of blood through the vascular system, with implications of hyperlipidemia and dyslipidemia. This study recommends that further studies should be done using biomarkers from urine or toe nails.

Erratum: Case Report: application of morphology in the diagnosis of siderosis in a patient with tuberculosis infection.

[This corrects the article DOI: 10.3389/fonc.2023.1001802.].

Case report: Application of morphology in the diagnosis of siderosis in a patient with tuberculosis infection.

A 49-year-old male who had been working in welding for more than 30 years was admitted to the hospital for a medical checkup that revealed a lung shadow without specific symptoms such as coughing and sputum. Imaging studies showed diffuse ground-glass changes in both lungs, wall cavities with wall nodules, multiple peripheral nodules, and some nodules with calcification. The patient has been engaged in welding work for more than 30 years and exposed to iron dust. Lung tissue biopsy, routine morphological and pathological fluid basis examination of alveolar lavage fluid, can be considered as pulmonary iron particles, which can be regarded as iron dust lung. Acid-fast bacilli were detected in both fibrobronchoscopic brush extract and alveolar lavage fluid acid-fast staining. As the pathological examination revealed granulomatous inflammation showed caseation necrosis, the patient was judged to have concomitant pulmonary TB. After the diagnosis was made, the patient was no longer exposed to dust and was treated with appropriate anti- tuberculosis (TB) therapy. Lung lesions caused by welding have been reported, but the simultaneous finding of siderosis with pulmonary TB is specific to the case presented here. By describing the imaging features, combining different staining methods of alveolar lavage fluid and pathological examination of lung tissue, we showed various morphological manifestations of this case, aiming at improving the morphological diagnosis level of laboratory physicians and enabling patients to be diagnosed and treated early.

Associations between welding fume exposure and neurological function in Japanese male welders and non-welders.

OBJECTIVES: There are some studies reporting the association between (manganese [Mn]) exposure to welding fume and neurological dysfunction. This study examined the relationship between Mn exposure and neurological behavior in Japanese male welders and non-welders using biological samples, which to date has not been assessed in Japan. METHODS: A total of 94 male welders and 95 male non-welders who worked in the same factories were recruited. The blood and urine samples were obtained from all the participants to measure Mn exposure levels. Neurological function tests were also conducted with all participants. The sampling of the breathing air zone using a personal sampler was measured for welders only. RESULTS: The odds ratios (ORs) for the Working Memory Index (WMI) scores were significantly higher among all participants in the low blood Mn concentration group than those in the high blood Mn concentration group (OR, 2.77; 95% confidence interval [CI], 1.24, 6.19; P = .013). The association of WMI scores and blood Mn levels in welders had the highest OR (OR, 3.73; 95% CI, 1.04, 13.38; P = .043). Although not statistically significant, a mild relationship between WMI scores and blood Mn levels was observed in non-welders (OR, 2.09; 95% CI, 0.63, 6.94; P = .227). CONCLUSIONS: The results revealed a significant positive relationship between blood Mn and neurological dysfunction in welders. Furthermore, non-welders at the same factories may be secondarily exposed to welding fumes. Further research is needed to clarify this possibility.

The effect of mask fit test on the association between the concentration of metals in biological samples and the results of time-weighted average personal exposure: A study on Japanese male welders.

OBJECTIVES: The mask fit test confirms whether the wearing condition of the wearer's face and the facepiece of the respirators are used appropriately. This study aimed to examine whether the results of the mask fit test affect the association between the concentration of metals related to welding fumes in biological samples and the results of time-weighted average (TWA) personal exposures. METHODS: A total of 94 male welders were recruited. Blood and urine samples were obtained from all participants to measure the metal exposure levels. Using personal exposure measurements, the 8-h TWA (8 h-TWA) of respirable dust, TWA of respirable Mn, and 8-h TWA of respirable Mn were calculated. The mask fit test was performed using the quantitative method specified in the Japanese Industrial Standard T8150:2021. RESULTS: Fifty-four participants (57%) passed the mask fit test. Only in the Fail group of the mask fit test, it was observed that blood Mn concentrations be positively associated with the results of TWA personal exposure after adjusting for multivariate factors (8-h TWA of respirable dust; coefficient, 0.066; standard error (SE), 0.028; P = 0.018, TWA of respirable Mn: coefficient, 0.048; SE, 0.020; P = 0.019, 8 h-TWA of respirable Mn: coefficient, 0.041; SE, 0.020; P = 0.041). CONCLUSIONS: The results clarify that welders with high concentrations of welding fumes in their breathing air zone are exposed to dust and Mn if there is leaking air owing to the lack of fitness between respirators and the wearer's face when using human samples in Japan.