Electron Localization and Mobility in Monolayer Fullerene Networks.

The novel 2D quasi-hexagonal phase of covalently bonded fullerene molecules (qHP C60), the so-called graphullerene, has displayed far superior electron mobilities, if compared to the parent van der Waals three-dimensional crystal (vdW C60). Herein, we present a comparative study of the electronic properties of vdW and qHP C60 using state-of-the-art electronic-structure calculations and a full quantum-mechanical treatment of electron transfer. We show that both materials entail polaronic localization of electrons with similar binding energies (≈0.1 eV) and, therefore, they share the same charge transport via polaron hopping. In fact, we quantitatively reproduce the sizable increment of the electron mobility measured for qHP C60 and identify its origin in the increased electronic coupling between C60 units.

Atomically Thin Kagome-Structured Co9Te16 Achieved through Self-Intercalation and Its Flat Band Visualization.

Kagome materials have recently garnered substantial attention due to the intrinsic flat band feature and the stimulated magnetic and spin-related many-body physics. In contrast to their bulk counterparts, two-dimensional (2D) kagome materials feature more distinct kagome bands, beneficial for exploring novel quantum phenomena. Herein, we report the direct synthesis of an ultrathin kagome-structured Co-telluride (Co9Te16) via a molecular beam epitaxy (MBE) route and clarify its formation mechanism from the Co-intercalation in the 1T-CoTe2 layers. More significantly, we unveil the flat band states in the ultrathin Co9Te16 and identify the real-space localization of the flat band states by in situ scanning tunneling microscopy/spectroscopy (STM/STS) combined with first-principles calculations. A ferrimagnetic order is also predicted in kagome-Co9Te16. This work should provide a novel route for the direct synthesis of ultrathin kagome materials via a metal self-intercalation route, which should shed light on the exploration of the intriguing flat band physics in the related systems.

Superlubric Graphullerene.

Graphullerene (GF), an extended quasi-two-dimensional network of C60 molecules, is proposed as a multicontact platform for constructing superlubric interfaces with layered materials. Such interfaces are predicted to present very small and comparable sliding energy corrugation regardless of the identity of the underlying flat layered material surface. It is shown that, beyond the geometrical effect, covalent interlinking between the C60 molecules results in reduction of the sliding energy barrier. For extended GF supercells, negligible sliding energy barriers are found along all sliding directions considered, even when compared to the case of the robust superlubric graphene/h-BN heterojunction. This suggests that multicontact architectures can be used to design ultrasuperlubric interfaces, where superlubricity may persist under extreme sliding conditions.

Large-Scale Synthesis of N,S Codoped Carbon-Modified Fe0.975S Composites as a Novel Anode for Lithium/Sodium Ion Batteries with Enhanced Performance.

To overcome obstacles hindering the commercialization of lithium-ion batteries (LIBs) and sodium-ion batteries (SIBs), we introduce a cost-effective single-step sulfurization strategy for synthesizing iron sulfide (Fe0.975S) nanohybrids, augmented by N,S codoped carbon. The resulting N,S codoped carbon-coated Fe0.975S (Fe0.975S@NSC) electrode exhibits exceptional potential as a highly reversible anode material for both LIBs and SIBs. With impressive initial discharge and charge capacities (1658.2 and 1254.9 mAh g-1 for LIBs and 1450.9 and 1077.1 mAh g-1 for SIBs), the electrode maintains substantial capacity retention (900 mA h g-1 after 1000 cycles for LIBs and 492.5 mA h g-1 after 600 cycles for SIBs at 1.0 A g-1). The LiMn2O4//Fe0.975S@NSC and Na3V2(PO4)3//Fe0.975S@NSC full batteries can maintain excellent reversible capacity and robust cycling stability. Ex situ and in situ X-ray diffraction, density functional theory (DFT) calculations, and kinetics analysis confirm the promising energy storage potential of the Fe0.975S@NSC composite.

Modulating Electronic Structure by Etching Strategy to Construct NiSe2 /Ni0.85 Se Heterostructure for Urea-Assisted Hydrogen Evolution Reaction.

Exploring and developing novel strategies for constructing heterostructure electrocatalysts is still challenging for water electrolysis. Herein, a creative etching treatment strategy is adopted to construct NiSe2 /Ni0.85 Se heterostructure. The rich heterointerfaces between NiSe2 and Ni0.85 Se emerge strong electronic interaction, which easily induces the electron transfer from NiSe2 to Ni0.85 Se, and tunes the charge-state of NiSe2 and Ni0.85 Se. In the NiSe2 /Ni0.85 Se heterojunction nanomaterial, the higher charge-state Ni0.85 Se is capable of affording partial electrons to combine with hydrogen protons, inducing the rapid formation of H2 molecule. Accordingly, the lower charge-state NiSe2 in the NiSe2 /Ni0.85 Se heterojunction nanomaterial is more easily oxidized into high valence state Ni3+ during the oxygen evolution reaction (OER) process, which is beneficial to accelerate the mass/charge transfer and enhance the electrocatalytic activities towards OER. Theoretical calculations indicate that the heterointerfaces are conducive to modulating the electronic structure and optimizing the adsorption energy toward intermediate H* during the hydrogen evolution reaction (HER) process, leading to superior electrocatalytic activities. To expand the application of the NiSe2 /Ni0.85 Se-2h electrocatalyst, urea is served as the adjuvant to proceed with the energy-saving hydrogen production and pollutant degradation, and it is proven to be a brilliant strategy.

Ca2 Ln(BS3 )(SiS4 ) (Ln = La, Ce, and Gd): Mixed Metal Thioborate-Thiosilicates as Well-Performed Infrared Nonlinear Optical Materials.

The first examples of thioborate-thiosilicates, namely Ca2 Ln(BS3 )(SiS4 ) (Ln = La, Ce, and Gd), are synthesized by rationally designed high-temperature solid-state reactions. They crystalize in the polar space group P63 mc and feature a novel three-dimensional crystal structure in which the discrete [BS3 ]3- and [SiS4 ]4- anionic groups are linked by Ca2+ and Ln3+ cations occupying the same atomic site. Remarkably, all three compounds show comprehensive properties required as promising infrared nonlinear optical materials, including phase-matchable strong second harmonic generation (SHG) responses at 2.05 µm (1.1-1.2 times that of AgGaS2 ), high laser-induced damage thresholds (7-10 times that of AgGaS2 ), wide light transmission range (0.45-11 µm), high thermal stabilities (>800 °C), and large calculated birefringence (0.126-0.149 @1064 nm), which justify the material design strategy of combining [BS3 ]3- and [SiS4 ]4- active units. Theoretical calculations suggest that their large SHG effects originate mainly from the synergy effects of the LnS6 , BS3 , and SiS4 groups. This work not only broadens the scope of research on metal chalcogenides but also provides a new synthetic route for mixed anionic thioborates.

A Universal Approach for Controllable Synthesis of Homogeneously Alloyed PtM Nanoflowers toward Enhanced Methanol Oxidation.

Platinum (Pt)-based alloys have received considerable attention due to their compositional variability and unique electrochemical properties. However, homogeneous element distribution at the nanoscale, which is beneficial to various electrocatalytic reactions, is still a great challenge. Herein, a universal approach is proposed to synthesize homogeneously alloyed and size-tunable Pt-based nanoflowers utilizing high gravity technology. Owing to the significant intensification of micro-mixing and mass transfer in unique high gravity shearing surroundings, five typical binary/ternary Pt-based nanoflowers are instantaneously achieved at room temperature. As a proof-of-concept, as-synthesized Platinum-Silver nanoflowers (PtAg NFs) demonstrate excellent catalytic performance and anti-CO poisoning ability for anodic methanol oxidation reaction with high mass activity of 1830 mA mgPt -1, 3.5 and 3.2 times higher than those of conventional beaker products and commercial Pt/C, respectively. The experiment in combination with theory calculations suggest that the enhanced performance is due to additional electronic transmission and optimized d-band center of Pt caused by high alloying degree.

Development of Novel Redox-Active Organic Materials Based on Benzimidazole, Benzoxazole, and Benzothiazole: A Combined Theoretical and Experimental Screening Approach.

Sustainability is one of the hot topics of today's research, in particular when it comes to energy-storage systems such as batteries. Redox-active molecules implemented in organic batteries represent a promising alternative to lithium-ion batteries, which partially rely on non-sustainable heavy metal salts. As an alternative, we propose benzothiazole, -oxazole and -imidazole derivatives as redox-active moieties for polymers in organic (radical) batteries. The target molecules were identified by a combination of theoretical and experimental approaches for the investigation of new organic active materials. Herein, we present the synthesis, electrochemical characterization and theoretical investigation of the proposed molecules, which can later be introduced into a polymer backbone and used in organic polymer batteries.

A strongly coupled 1T'-ReSe2@2H-MoSe2 van der Waals heterostructure for efficient electrocatalytic hydrogen evolution at high current densities.

Developing efficient and durable non-noble metal electrocatalysts for high current-density hydrogen evolution reactions (HER) is a pressing requirement for commercial industrial electrolyzers. In this study, a vertical 1T'-ReSe2@2H-MoSe2 van der Waals heterostructure was developed through interface engineering to enhance the advantages of each component and expose numerous active sites. Experimental investigations and density functional theory calculations demonstrate significant electronic coupling at the interface between 1T'-ReSe2 and 2H-MoSe2, with suitable Gibbs free energy for hydrogen adsorption. The 1T'-ReSe2@2H-MoSe2 heterostructure catalyst achieves high current density HER with low overpotentials of 191 mV to generate up to 800 mA/cm2 in 0.5 M H2SO4, outperforming commercial 5% Pt/C catalysts. Moreover, this catalyst exhibits rapid reaction kinetics and long-term durability, illustrating a successful approach to designing efficient heterostructure electrocatalysts for hydrogen production through interface engineering.

Autocatalysis in Eschenmoser Coupling Reactions.

The Eschenmoser coupling reaction (ECR) of thioamides with electrophiles is believed to proceed via thiirane intermediates. However, little is known about converting the intermediates into ECR products. Previous mechanistic studies involved external thiophiles to remove the sulfur atom from the intermediates. In this work, an ECR proceeding without any thiophilic agent or base is studied by electrospray ionization-mass spectrometry. ESI-MS enables the detection of the so-far elusive polysulfide species Sn , with n ranging from 2 to 16 sulfur atoms, proposed to be the key species leading to product formation. Integrating observations from ion mobility spectrometry, ion spectroscopy, and reaction monitoring via flow chemistry coupled with mass spectrometry provides a comprehensive understanding of the reaction mechanism and uncovers the autocatalytic nature of the ECR reaction.

Dual Stabilization of a Tri-Metallofullerene Radical Er3@C80: Exohedral Derivatization and Endohedral Three-Center Bonding.

The enclosed space within fullerene molecules, capable of trapping metal clusters, offers an opportunity to investigate the behavior of metal atoms in a highly confined sub-nanometer environment. However, the studies on trimetallofullerenes M3@C80 have been very limited due to their difficult obtainability. In this paper, we present a new method for obtaining a tri-metallofullerene Er3@C80 through exohedral modification of the fullerene cage. Our findings reveal that Er3@C80 exhibits a radical character and can react with the dichlorobenzene radical to generate a stable derivative Er3@C80PhCl2. Theoretical calculations demonstrate the presence of a three-center two-electron metal-metal bond in the center of the fullerene cage. This bond serves to counterbalance the Coulomb repulsion between the Er ions. Consequently, both exohedral derivatization and endohedral three-center bonding contribute to the substantial stability of Er3@C80PhCl2. Furthermore, molecular dynamics simulations indicate that the Er3 cluster within the molecule possesses a rigid triangle structure. The availability of M3@C80 derivatives opens avenues for future investigations into interactions among metal atoms, such as magnetic coupling, within fullerene cages.

A PERICYCLIC REACTION IN THE GAS PHASE IDENTIFIED BY ROTATIONAL SPECTROSCOPY: REACTION OF A THIOCARBOXYLIC ACID WITH SULFUR TRIOXIDE.

The reaction of sulfur trioxide (SO3) and thiobenzoic acid (C6H5COSH) is investigated in the gas phase under supersonic jet conditions. Rotational spectroscopy of the parent and several isotopically substituted derivatives, in conjunction with DFT calculations at the M06-2X/6-311++G(3df,3pd) level of theory, identify the product as thiobenzoic sulfuric anhydride, C6H5C(=S)OSO2OH. Single point CCSD(T)/CBS(D-T)//M06-2X/6-311++G(3df,3pd) calculations place the electronic energy of the product anhydride 114 kJ/mol lower than that of SO3 + C6H5COSH at infinite separation. The calculations further indicate that the reaction proceeds through a cyclic transition state which lies 11.3 kJ/mol higher in energy than a C6H5COSH·SO3 complex, but 83.3 kJ/mol lower in energy than that of the separated reactants. The reaction is rapid under the experimental conditions of this study: based on the duration of the collisional phase of the supersonic expansion, it is clear that the product is formed within tens of microseconds after mixing. While the analogous reaction of carboxylic acids with SO3 has been demonstrated, the ability of a thiocarboxylic acid to undergo similar chemistry has not previously been established. Although rotational spectroscopy is best known for its precise interrogation of molecular and electronic structure, this work demonstrates its ability to study chemical transformations as well.

Ferroheme/Ferriheme Directly Involved in the Synthesis and Decomposition of Hydrazine as an Electron Carrier during Anammox.

Anammox bacteria performed the reaction of NH4+ and NO with hydrazine synthase to produce N2H4, followed by the decomposition of N2H4 with hydrazine dehydrogenase to generate N2. Ferroheme/ferriheme, which serves as the active center of both hydrazine synthase and hydrazine dehydrogenase, is thought to play a crucial role in the synthesis and decomposition of N2H4 during Anammox due to its high redox activity. However, this has yet to be proven and the exact mechanisms by which ferroheme/ferriheme is involved in the Anammox process remain unclear. In this study, abiotic and biological assays confirmed that ferroheme participated in NH4+ and NO reactions to generate N2H4 and ferriheme, and the produced N2H4 reacted with ferriheme to generate N2 and ferroheme. In other words, the ferroheme/ferriheme cycle drove the continuous reaction between NH4+ and NO. Raman, ultraviolet-visible spectroscopy, and X-ray absorption fine structure spectroscopy confirmed that ferroheme/ferriheme is involved in the synthesis and decomposition of N2H4 via the core FeII/FeIII cycle. The mechanism of ferroheme/ferriheme participation in the synthesis and decomposition of N2H4 was proposed by density functional theory calculations. These findings revealed for the first time the heme electron transfer mechanisms, which are of great significance for deepening the understanding of Anammox.

Combined Experimental and Density Functional Theory Study on the Mechanism of the Selective Catalytic Reduction of NO with NH3 over Metal-Free Carbon-Based Catalysts.

Metal-free carbon-based catalysts are attracting much attention in the low-temperature selective catalytic reduction of NOx with NH3 (NH3-SCR). However, the mechanism of the NH3-SCR reaction on carbon-based catalysts is still controversial, which severely limits the development of carbon-based SCR catalysts. Herein, we successfully reconstructed carbon-based catalysts through oxidation treatment with nitric acid, thereby enhancing their low-temperature activity in NH3-SCR. Combining experimental results and density functional theory (DFT) calculations, we proposed a previously unreported NH3-SCR reaction mechanism over carbon-based catalysts. We demonstrated that C-OH and C-O-C groups not only effectively activate NH3 but also remarkedly promote the decomposition of intermediate NH2NO. This study enhances the understanding of the NH3-SCR mechanism on carbon-based catalysts and paves the way to develop low-temperature metal-free SCR catalysts.

Insight in sulfadiazine degradation by peroxymonosulfate activated by polydopamine-derived nitrogen-doped carbon supported CoFe2O4: Co leaching inhibition and degradation enhancement.

Heterogeneous catalyst-mediated sulfate radical-based advanced oxidation processes (SR-AOPs) showed excellent performance during antibiotics degradation. Spinel was a promising catalyst for SR-AOPs, but the secondary contamination due to metal ions leaching needed to be addressed. And the destruction of catalyst structure could lead to the reduction of catalytic activity and the difficulty of recovery. Thus, a novel nitrogen-doped carbon (NC)-supported CoFe2O4 (CoFe2O4@NC) was synthesized as the activator of PMS for sulfadiazine (SDZ) degradation under low Co leaching conditions. The consequences indicated that the CoFe2O4@NC/PMS system exhibited higher PMS decomposition efficiency and reaction stoichiometry efficiency than the bare CoFe2O4/PMS systems (CoFe2O4-180 and CoFe2O4-800), which in turn demonstrated a better SDZ removal performance. Under the condition of CoFe2O4@NC dosage 0.1 g/L, PMS concentration 0.5 mM, solution pH 6.8 and temperature 25°C, SDZ (20 mg/L) was almost completely degraded within 60 min. XPS analysis showed that the NC not only protected and stabilized CoFe2O4, but also provided additional active sites for PMS activation. During SDZ degradation, SO4•-, HO•, •O2- and 1O2 were involved in the reaction, among which SO4• and HO• made the main contribution. Meanwhile, CoFe2O4@NC could be recovered by magnetic separation, and showed great stability (Co leaching 0.852 mg/L) and reusability. In the fifth cycle experiment, 85.02 % SDZ degradation was obtained. Based on the detected intermediates (12 intermediates were identified) and DFT calculations, possible degradation pathways for SDZ in CoFe2O4@NC/PMS were proposed. The condensed dual descriptor indicated that the N7, N11, and C15 atoms on SDZ molecule were the main sites of electrophilic attack, which was consistent with the detected intermediates. The degradation of SDZ involved hydroxylation of NH2, cleavage of S-N and extrusion of SO2. This study explored the improvements made in NC support material to catalytic performance and resistance to dissolution of spinel, providing new insights for subsequent researches.

Stability and Strength of Monolayer Polymeric C60.

Two-dimensional fullerene networks have been synthesized in several forms, and it is unknown which monolayer form is stable under ambient conditions. Using first-principles calculations, I show that the believed stability of the quasi-tetragonal phases is challenged by mechanical, dynamic, or thermodynamic stability. For all temperatures, the quasi-hexagonal phase is thermodynamically the least stable. However, the relatively high dynamic and mechanical stabilities suggest that the quasi-hexagonal phase is intrinsically stronger than the other phases under various strains. The origin of the high stability and strength of the quasi-hexagonal phase can be attributed to the strong covalent C-C bonds that strongly hold the linked C60 clusters together, enabling the closely packed hexagonal network. These results rationalize the experimental observations that so far only the quasi-hexagonal phase has been exfoliated experimentally as monolayers.

Stability and Electronic Properties of Mixed Rare-Earth Tri-Metallofullerenes YxDy3-x@C80 (x = 1 or 2).

Tri-metallofullerenes, specifically M3@C80 where M denotes rare-earth metal elements, are molecules that possess intriguing magnetic properties. Typically, only one metal element is involved in a given tri-metallofullerene molecule. However, mixed tri-metallofullerenes, denoted as M1xM23-x@C80 (x = 1 or 2, M1 and M2 denote different metal elements), have not been previously discovered. The investigation of such mixed tri-metallofullerenes is of interest due to the potential introduction of distinct properties resulting from the interaction between different metal atoms. This paper presents the preparation and theoretical analysis of mixed rare-earth tri-metallofullerenes, specifically YxDy3-x@C80 (x = 1 or 2). Through chemical oxidation of the arc-discharge produced soot, the formation of tri-metallofullerene cations, namely Y2Dy@C80+ and YDy2@C80+, has been observed. Density functional theory (DFT) calculations have revealed that the tri-metallofullerenes YxDy3-x@C80 (x = 1 or 2) exhibit a low oxidation potential, significantly lower than other fullerenes such as C60 and C70. This low oxidation potential can be attributed to the relatively high energy level of a singly occupied orbital. Additionally, the oxidized species demonstrate a large HOMO-LUMO gap similar to that of YxDy3-xN@C80, underscoring their high chemical stability. Theoretical investigations have uncovered the presence of a three-center two-electron metal-metal bond at the center of Y2DY@C80+ and YDy2@C80+. This unique multi-center bond assists in alleviating the electrostatic repulsion between the metal ions, thereby contributing to the overall stability of the cations. These mixed rare-earth tri-metallofullerenes hold promise as potential candidates for single-molecule magnets.

Insights into ThB40: Stability, Electronic Structure, and Interaction.

The interaction between nonmetal and metal atoms has attracted great interest in the development of organometallic compounds and their promising applications. In this study, we explored the interaction between boron and thorium atoms, based on the stable B40Th coordination compound, by employing density functional theory calculations. We elucidated the stability and geometries of the B40Th coordination compound and revealed the electron transfer from the metal atom Th to B40, which is evidenced by the natural bond orbital calculations. This electron transfer is attributed to the electron-withdrawing character of the boron atom and results in clear electrostatic interaction. Additionally, bond critical analysis and bond order calculations show obvious covalent characters between the metal and nonmetal atoms. The IR spectrum was simulated to give detailed information to identify this targeted compound in future experiments. This study is expected to enhance the understanding of metal-nonmetal interactions and provides useful information for constructing new organometallic compounds based on actinium metal atoms.

Designing Organic Spin-Gapless Semiconductors via Molecular Adsorption on C4N3 Monolayer.

Spin-gapless semiconductor (SGS), a class of zero-gap materials with fully spin-polarized electrons and holes, offers significant potential for high-speed, low-energy consumption applications in spintronics, electronics, and optoelectronics. Our first-principles calculations revealed that the Pca21 C4N3 monolayer exhibits a ferromagnetic ground state. Its band structure displays SGS-like characteristics, with the energy gap between the valence and conduction bands near the Fermi level in the spin-down channel much smaller than the one in the other spin channel. To enhance its SGS properties, we introduced electrons into the Pca21 C4N3 monolayer by adsorbing the CO gas molecule on its surface. Stable gas adsorption (CO@C4N3) effectively narrowed the band gap in the spin-down channel without changing the band gap in the spin-up channel obviously. Moreover, injecting holes into the CO@C4N3 system could increase the net magnetic moments and induce an SGS-to-metallic phase transition, while injecting electrons into the CO@C4N3 system is able to lower the net magnetic moments and cause an SGS-to-half-metallic phase transition. Our findings not only underscore a new promising material for practical metal-free spintronics applications but also illustrate a viable pathway for designing SGSs.

Sc-Modified C3N4 Nanotubes for High-Capacity Hydrogen Storage: A Theoretical Prediction.

Utilizing hydrogen as a viable substitute for fossil fuels requires the exploration of hydrogen storage materials with high capacity, high quality, and effective reversibility at room temperature. In this study, the stability and capacity for hydrogen storage in the Sc-modified C3N4 nanotube are thoroughly examined through the application of density functional theory (DFT). Our finding indicates that a strong coupling between the Sc-3d orbitals and N-2p orbitals stabilizes the Sc-modified C3N4 nanotube at a high temperature (500 K), and the high migration barrier (5.10 eV) between adjacent Sc atoms prevents the creation of metal clusters. Particularly, it has been found that each Sc-modified C3N4 nanotube is capable of adsorbing up to nine H2 molecules, and the gravimetric hydrogen storage density is calculated to be 7.29 wt%. It reveals an average adsorption energy of -0.20 eV, with an estimated average desorption temperature of 258 K. This shows that a Sc-modified C3N4 nanotube can store hydrogen at low temperatures and harness it at room temperature, which will reduce energy consumption and protect the system from high desorption temperatures. Moreover, charge donation and reverse transfer from the Sc-3d orbital to the H-1s orbital suggest the presence of the Kubas effect between the Sc-modified C3N4 nanotube and H2 molecules. We draw the conclusion that a Sc-modified C3N4 nanotube exhibits exceptional potential as a stable and efficient hydrogen storage substrate.