31P multi-echo MRSI with low B1 + dual-band refocusing RF pulses.

31P magnetic resonance spectroscopy (MRS) can spectrally resolve metabolites involved in phospholipid metabolism whose levels are altered in many cancers. Ultra-high field facilitates the detection of phosphomonoesters (PMEs) and phosphodiesters (PDEs) with increased SNR and spectral resolution. Utilizing multi-echo MR spectroscopic imaging (MRSI) further enhances SNR and enables T2 information estimation per metabolite. To address the specific absorption rate (SAR) challenges associated with high-power demanding adiabatic or composite block pulses in multi-echo phosphorus imaging, we present a dual-band refocusing RF pulse designed for operation at B1 amplitudes of 14.8 µT which holds potential for integration into multi-echo sequences. Phantom and in vivo experiments conducted in the brain at 7 Tesla validated the effectiveness of this low-power dual-band RF pulse. Furthermore, we implemented the dual-band RF pulse into a multi-echo MRSI sequence where it offered the potential to increase the number of echo pulses within the same acquisition time compared to high-power adiabatic implementation, demonstrating its feasibility and practicality.

A Miniaturized Dual-Band Circularly Polarized Implantable Antenna for Use in Hemodialysis.

Hemodialysis is achieved by implanting a smart arteriovenous graft (AVG) to build a vascular pathway, but reliability and stability in data transmission cannot be guaranteed. To address this issue, a miniaturized dual-band circularly polarized implantable antenna operating at 1.4 GHz (for energy transmission) and 2.45 GHz (for wireless telemetry), implanted in a wireless arteriovenous graft monitoring device (WAGMD), has been designed. The antenna design incorporates a rectangular serpentine structure on the radiation surface to reduce its volume to 9.144 mm3. Furthermore, matching rectangular slots on the radiation surface and the ground plane enhance the antenna's circular polarization performance. The simulated effective 3 dB axial ratio (AR) bandwidths are 11.43% (1.4 GHz) and 12.65% (2.45 GHz). The simulated peak gains of the antenna are -19.55 dBi and -22.85 dBi at 1.4 GHz and 2.45 GHz, respectively. The designed antenna is implanted in a WAGMD both in the simulation and the experiment. The performance of the system is simulated in homogeneous human tissue models of skin, fat, and muscle layers, as well as a realistic adult male forearm model. The measurement results in a minced pork environment align closely with the simulation results.

Dual-Band Monopole MIMO Antenna Array for UAV Communication Systems.

This study proposes a compact, low-profile, four-port dual-band monopole multiple-input-multiple-output (MIMO) antenna array for unmanned aerial vehicle (UAV) communication systems. Each monopole antenna of the array features a modified T-shaped radiator configuration and is printed on a Rogers RT5880 substrate with compact dimensions of 134.96 mm × 134.96 mm × 0.8 mm. A four-element square MIMO configuration with sequential 0°, 90°, 180°, and 270° rotations was integrated smoothly into the UAV body. A prototype of the MIMO array was fabricated and experimentally evaluated, with measured results showing a close correlation to simulated results. The proposed dual-band monopole antenna demonstrated one of the widest impedance bandwidths of 46.15% at 2.4 GHz (2.04 to 3.25 GHz) IEEE 802.11b and 31.85% at 5.8 GHz (5.37 to 7.38 GHz) IEEE 802.11a on a thin 0.0064 λo substrate while achieving high transmission efficiency. The isolation of the proposed four-port MIMO design was measured at 23 dB at 2.4 GHz and 19 dB at 5.8 GHz. The MIMO array's total efficiency of each monopole antenna was measured at 96% at 2.4 GHz and 89% at 5.8 GHz. The design has measured diversity parameters such as an ECC below 0.01 and a DG of approximately 10. Based on these results, the proposed design suits the UAV communication system.

Dual-Band Antenna Array Fed by Ridge Gap Waveguide with Dual-Periodic Interdigital-Pin Bed of Nails.

A dual-band (K-/Ka-band) antenna array is presented. An ultra-wideband antenna element in the shape of a double-ridged waveguide is used as a radiation slot, and a novel dual-periodic ridge gap waveguide (RGW) with an interdigital-pin bed of nails (serving as a filter) is used to realize dual-band operation. By periodically arranging the pins of two different heights in two dimensions, the proposed RGW with interdigital-pin bed of nails is able to realize and flexibly adjust two passbands. The widely used GW-based back cavity boosts the realized gain and simplifies the feed network design. A 4 × 4 prototype array was designed, fabricated, and measured. The results show that the array has two operating bands at 24.5-26.4 GHz and 30.3-31.5 GHz, and the realized gain can reach 19.2 dBi and 20.4 dBi, respectively. Meanwhile, there is a very significant gain attenuation at stopband.

Calibration of Dual-Channel Raman Spectrometer via Optical Frequency Comb.

The portable Raman spectrometer boasts portability, rapid analysis, and high flexibility. It stands as a crucial and powerful technical tool for analyzing the chemical composition of samples, whether biological or non-biological, across diverse fields. To improve the resolution of grating spectrometers and ensure a wide spectral range, many spectrometer systems have been designed with double-grating structures. However, the impact of external forces, such as installation deviations and inevitable collisions, may cause differences between the actual state of the internal spectrometer components and their theoretical values. Therefore, spectrometers must be calibrated to establish the relationship between the wavelength and the pixel positions. The characteristic peaks of commonly used calibration substances are primarily distributed in the 200-2000 cm-1 range. The distribution of characteristic peaks in other wavenumber ranges is sparse, especially for spectrometers with double-channel spectral structures and wide spectral ranges. This uneven distribution of spectral peaks generates significant errors in the polynomial fitting results used to calibrate spectrometers. Therefore, to satisfy the calibration requirements of a dual-channel portable Raman spectrometer with a wide spectral range, this study designed a calibration method based on an optical frequency comb, which generates dense and uniform comb-like spectral signals at equal intervals. The method was verified experimentally and compared to the traditional calibration method of using a mercury-argon lamp. The results showed that the error bandwidth of the calibration results of the proposed method was significantly smaller than that of the mercury-argon lamp method, thus demonstrating a substantial improvement in the calibration accuracy.

Dual-Band Passive Beam Steering Antenna Technologies for Satellite Communication and Modern Wireless Systems: A Review.

Efficient beam steerable high-gain antennas enable high-speed data rates over long-distance networks, including wireless backhaul, satellite communications (SATCOM), and SATCOM On-the-Move. These characteristics are essential for advancing contemporary wireless communication networks, particularly within 5G and beyond. Various beam steering solutions have been proposed in the literature, with passive beam steering mechanisms employing planar metasurfaces emerging as cost-effective, power-efficient, and compact options. These attributes make them well-suited for use in confined spaces, large-scale production and widespread distribution to meet the demands of the mass market. Utilizing a dual-band antenna terminal setup is often advantageous for full duplex communication in wireless systems. Therefore, this article presents a comprehensive review of the dual-band beam steering techniques for enabling full-duplex communication in modern wireless systems, highlighting their design methodologies, scanning mechanisms, physical characteristics, and constraints. Despite the advantages of planar metasurface-based beam steering solutions, the literature on dual-band beam steering antennas supporting full duplex communication is limited. This review article identifies research gaps and outlines future directions for developing economically feasible passive dual-band beam steering solutions for mass deployment.

Harnessing 4f Electron Itinerancy for Integrated Dual-Band Redox Systems Boosts Lithium-Oxygen Batteries Electrocatalysis.

In-depth comprehension and manipulation of band occupation at metal centers are crucial for facilitating effective adsorption and electron transfer in lithium-oxygen battery (LOB) reactions. Rare earth elements play a unique role in band hybridization due to their deep orbitals and strong localization of 4f electrons. Herein, we anchor single Ce atoms onto CoO, constructing a highly active and stable catalyst with d-f a dual-band redox center. It is discovered that the itinerant behavior of 4f electrons introduces an enhanced spin-orbit coupling effect, which facilitates ideal σ/π bonding and flexible adsorption between the Ce/Co active sites and *O. Simultaneously, the injection of localized Ce 4f electrons strengthens the orbital bonding capacity of Co-O, effectively inhibits the dissolution of Co sites and improves the structural stability of the cathode material. Bracingly, the Ce1/CoO-based LOB exhibits an ultra-low charge-discharge polarization (0.46 V) and stable cyclic performance (1088 hours). This work breaks through the traditional limitations in catalyst activity and stability, providing new strategies and theoretical insights for developing high-performance LOBs powered by rare-earth elements.

A Low-Profile Antenna for On-Body and Off-Body Applications in the Lower and Upper ISM and WLAN Bands.

The article presents a Co-planar Waveguide (CPW) fed antenna of a low-profile, simple geometry, and compact size operating at the dual band for ISM and WLAN applications for 5G communication devices. The antenna has a small size of 30 mm × 18 mm × 0.79 mm and is realized using Rogers RT/Duroid 5880 substrate. The proposed dual-band antenna contains a CPW feedline along with the triangular patch. Later on, various stubs are loaded to obtain optimal results. The proposed antenna offers a dual band at 2.4 and 5.4 GHz while covering the impedance bandwidths of 2.25-2.8 GHz for ISM and 5.45-5.65 GHz for WLAN applications, respectively. The proposed antenna design is studied and analyzed using the Electromagnetic (EM) High-Frequency Structure Simulator (HFSSv9) tool, and a hardware prototype is fabricated to verify the simulated results. As the antenna is intended for on-body applications, therefore, Specific Absorption Rate (SAR) analysis is carried out to investigate the Electromagnetic effects of the antenna on the human body. Moreover, a comparison between the proposed dual-band antenna and other relevant works in the literature is presented. The results and comparison of the proposed work with other literary works validate that the proposed dual-band antenna is suitable for future 5G devices working in Industrial, Scientific, Medical (ISM), and Wireless Local Area Network (WLAN) bands.

Modified U Slot Patch Antenna with Large Frequency Ratio for Vehicle-to-Vehicle Communication.

This paper presents a single-fed, single-layer, dual-band antenna with a large frequency ratio of 4.74:1 for vehicle-to-vehicle communication. The antenna consists of a 28 GHz inset-fed rectangular patch embedded into a 5.9 GHz patch antenna for dual-band operation. The designed dual-band antenna operates from 5.81 to 5.99 GHz (Dedicated Short Range Communications, DSRC) and 27.9 to 30.1 GHz (5G millimeter-wave (mm-wave) band). Furthermore, the upper band patch was modified by inserting slots near the inset feed line to achieve an instantaneous bandwidth of 4.5 GHz. The antenna was fabricated and measured. The manufactured prototype operates simultaneously from 5.8 to 6.05 GHz and from 26.8 to 31.3 GHz. Notably, the designed dual-band antenna offers a high peak gain of 7.7 dBi in the DSRC band and 6.38 dBi in the 5G mm-wave band.

Designing a Compact Dual-Band, Dual-Polarized Antenna for Biotelemetry Communications Using the Characteristic Mode Method.

A compact dual-band, dual-polarized, implantable antenna was designed using the characteristic mode method for operation in the wireless medical telemetry service (WMTS) band (1.4 GHz) and the industrial, scientific, and medical (ISM) band (2.45 GHz). By utilizing slotting techniques and materials with high dielectric constants, the antenna volume was minimized to 47.4 mm3, and circular polarization was gained in the WMTS band by using the characteristic mode method. A three-layer physical model of human tissues was constructed in a simulation, and a biogel and minced pork were used in the measurements. The measured peak gains are -20.85 dBi (1.4 GHz) and -22.15 dBi (2.45 GHz). The measured effective axis ratio bandwidth in the WMTS band is 170 MHz (1.33-1.50 GHz, 12.0%), and the impedance bandwidth in the ISM band is 390 MHz (2.21-2.60 GHz, 16.2%). At 1.4 GHz and 2.45 GHz, the largest 1 g average SAR values are 376 W/Kg and 318 W/Kg, which comply with IEEE C95.1-1999. Moreover, when the communication chain affinity exceeds 20 dB for 1.4 GHz and 2.4 GHz, the transceiver range reaches 8.2 m and 9.7 m. This antenna can be used for implantable wireless telemetry systems.

A Compact Dual-Band Millimeter Wave Antenna for Smartwatch and IoT Applications with Link Budget Estimation.

Advancement in smartwatch sensors and connectivity features demands low latency communication with a wide bandwidth. ISM bands below 6 GHz are reaching a threshold. The millimeter-wave (mmWave) spectrum is the solution for future smartwatch applications. Therefore, a compact dual-band antenna operating at 25.5 and 38 GHz is presented here. The characteristics mode theory (CMT) aids the antenna design process by exciting Mode 1 and 2 as well as Mode 1-3 at their respective bands. In addition, the antenna structure generates two traverse modes, TM10 and TM02, at the lower and higher frequency bands. The antenna measured a bandwidth (BW) of 1.5 (25-26.5 GHz) and 2.5 GHz (37-39.5 GHz) with a maximum gain of 7.4 and 7.3 dBi, respectively. The antenna performance within the watch case (stainless steel) showed a stable |S11| with a gain improvement of 9.9 and 10.9 dBi and a specific absorption rate (SAR) of 0.063 and 0.0206 W/kg, respectively, at the lower and higher bands. The link budget analysis for various rotation angles of the watch indicated that, for a link margin of 20 dB, the antenna can transmit/receive 1 Gbps of data. However, significant fading was noticed at certain angles due to the shadowing effect caused by the watch case itself. Nonetheless, the antenna has a workable bandwidth, a high gain, and a low SAR, making it suitable for smartwatch and IoT applications.

Research on Development 3D Ground Penetrating Radar Acquisition and Control Technology for Road Underground Diseases with Dual-Band Antenna Arrays.

This paper describes the development of a new 3D ground-penetrating radar (GPR) acquisition and control technology for road underground diseases with dual-band antenna arrays. The 3D GPR system can be mounted on a vehicle-loading device and used by vehicles to detect road underground diseases at regular speeds. Compared with existing 3D GPR systems, this new type of 3D GPR has the following design features: it has dual-band antenna arrays, including a 16-channel 400 MHz antenna array and an 8-channel 200 MHz antenna array, which not only improves the detection efficiency, but also effectively balances the detection depth and detection resolution. A novel antenna switching method for time division step multiplexing (TDSM) is realized via field programmable gate array (FPGA), which not only avoids the crosstalk of antenna echo signals of different frequencies, but also ensures the interval of the same antenna working time. By combining the advantages of the FPGA and micro-control unit (MCU), and utilizing the high-speed transmission of the network port, the high-speed real-time transmission of the 3D GPR echo data is achieved. Finally, the integration of all software and hardware verified the correctness of the system, with good results.

Dual-Band Frequency Selective Surface with Different Polarization Selectivity for Wireless Communication Application.

This article proposes a dual-band, frequency- and polarization-selective surface. Multiple resonant modes are introduced using the U-shaped resonator with a ground via to achieve dual-band responses and polarization selectivity. Two symmetrically grounded U-shaped resonators are coupled through electrically coupled apertures in a common ground, resulting in a passband with two transmission zeros per polarization. A general design flowchart and additional examples at the S, X, and K-bands are presented as well. A prototype at X-band is analyzed, fabricated, and measured, showing the passband center frequencies of 9.68 GHz and 10.73 GHz, factional bandwidths of 3.45% and 3.48%, and insertion losses of 0.9 dB and 1.1 dB, respectively. Due to the high selectivity, small frequency ratio, low profile, and stable performance under oblique incidence, the proposed designs have application potential in wireless communication systems.

Low-Profile Dual-Band Reflector Antenna for High-Frequency Applications.

A high-gain low-profile reflector antenna with dual-band radiation ability is presented in this paper. The antenna achieves a relative 2 dB gain bandwidth of 10% around fl, and a relative 2 dB gain bandwidth of 20%, around fh, where fl and fh are the center operating frequencies of the frequency bands of 29.4~32.4 GHz and 142~174 GHz, respectively. To achieve the dual-band radiation ability, a composite dual-band feed with an fh/fl ratio of around 5 is proposed as the feed for the reflector antenna, which includes a higher-band circular waveguide and a lower-band coaxial horn. The metallic elliptical surface serves as the subreflector (SR) in the higher band, while the SR is the planar reflectarray in the lower band. Due to the design of the dual reflector, the dual-band reflector antenna features a low focal-to-diameter (F/D) ratio of approximately 0.2. According to the simulated results, the proposed reflector antenna achieves efficiencies of 59.0% and 42.9% at fl and fh, respectively. For verification purposes, a Ku/E-band scaled prototype is manufactured. The measured VSWRs, radiation patterns, and gains are in reasonable agreement with the simulated ones, proving the correctness of the proposed design method.

Antennas for Licensed Shared Access in 5G Communications with LTE Mid- and High-Band Coverage.

Two novel antennas are presented for mobile devices to enable them to access both licensed shared access (LSA) bands (1452-1492 and 2300-2400 MHz) and all the long-term evolution (LTE) mid (1427-2690 MHz) and high (3400-3800 MHz) bands, together with the GSM1800, GSM1900, UMTS, and 3.3 GHz WiMAX bands. These antennas do not require any passive or active lumped elements for input impedance matching. One of them is a dual-band antenna and the other is a wideband antenna. Both antennas have high efficiency in all the LSA bands, as well as the mid- and high-LTE bands, and nearly omnidirectional radiation patterns in the mid band. In the high band, the radiation patterns of the wideband antenna are less directional than those of the dual-band antenna. The wideband antenna was fabricated and tested and the measurements demonstrated that it had good wideband performance in a wide frequency range from 1.37 to 4 GHz, covering all the above-mentioned bands.

Regulating the Singlet and Triplet Emission of Sb3+ Ions to Achieve Single-Component White-Light Emitter with Record High Color-Rendering Index and Stability.

The rapid development of solid-state lighting technology has attracted much attention for searching efficient and stable luminescent materials, especially the single-component white-light emitter. Here, we adopt a facile ion-doping technology to synthesize vacancy-ordered double perovskite Cs2ZrCl6:Sb. The introduction of Sb3+ ions with a 5s2 active lone pair into Cs2ZrCl6 host stimulates the singlet (blue) and triplet (orange) states emission of Sb3+ ions, and their relative emission intensity can be tuned through the energy transfer from singlet to triplet states. Benefiting from the dual-band emission as a pair of perfect complementary colors, the optimum Cs2ZrCl6:1.5%Sb exhibits a high-quality white emission with a color-rendering index of 96. By employing Cs2ZrCl6:1.5%Sb as the down-conversion phosphor, stable single-component white light-emitting diodes with a record half-lifetime of 2003 h were further fabricated. This study puts forward an effective ion-doping strategy to design single-component white-light emitter, making practical applications of them in lighting technologies a real possibility.

Efficacy and safety of intense pulsed light using a dual-band filter for the treatment of facial acne vulgaris.

Intense pulsed light (IPL) devices have been used in acne treatment in combination with conventional topical and oral medications. This study aimed to evaluate the efficacy and safety of IPL treatment using a dual-band filter (400-600 nm and 800-1200 nm) in facial acne vulgaris treatment. Twenty-three acne vulgaris patients were enrolled in this study. The patients were treated on both sides of the face. The treatments were performed in 2-week intervals for a total of five sessions. The final visit for the clinical evaluation was 2 weeks after the fifth treatment session. The mean number of papules, pustules, and comedones, and the melanin index, was significantly decreased at the final visit. However, sebum production and the erythema index showed no statistically significant differences after treatment. IPL treatment using a dual-band filter can be an alternative for patients who are unfit for systemic acne medication. It can also be used with conventional acne treatment for better treatment results.

Dual-Band Wide-Angle Reflective Circular Polarization Converter with Orthogonal Polarization Modes.

Herein a dual-band wide-angle reflective circular polarization converter, based on a metasurface was developed. The unit cell is composed of a split square ring and a nested square patch. The split square ring plays the role of creating polarization conversion. The square patch is useful for improving the quality of axial ratio. It was verified that the structure could transform the x-polarized incident wave into left-hand circular polarization in the lower frequency band, and to right-hand circular polarization in the higher frequency band. For y-polarized incidence, the transformation has orthogonal modes to that for x-polarized incidence. Moreover, the 3 dB axial ratio takes place in the ranges of 8.42-12.32 GHz and 18.74-29.73 GHz, corresponding to a relative bandwidth of 37.61%, and 45.35%, respectively. In addition, the polarization conversion efficiency is greater than 99% in the ranges of 8.65-11.83 GHz and 19.55-29.36 GHz. Furthermore, for oblique incidence, the axial ratio remains stable, even at 50° incidence, for the lower frequency band. Lastly, a prototype is fabricated and measured for experimental verification. The measured and simulated results were in good agreement. Compared with other designs in the literature, the proposed converter operates with good performance in dual-band, with high-efficiency, and with angular stability.

Dual-Frequency Linear-to-Circular Polarization Converter for Ka-Band Applications.

A dual-band linear-to-circular planar polarization converter based on a multilayer printed circuit board (PCB) is proposed and demonstrated. Each cell of the periodic surface is formed by six substrate layers separated by five foam spacers. The three top layers are identical and contain an 'I'-type strip, while the three layers on the bottom side are realized with three identical Jerusalem crosses (JC). A linearly polarized (LP) wave tilted 45° relative to the x- and y-axis of the converter is used to illuminate the polarizer. In this configuration, right-handed circularly polarized (RHCP) waves are generated at the Ka-band while left-handed circularly polarized (LHCP) waves are generated at the K-band. An equivalent circuit model based on transmission lines is proposed and used to design the polarizer together with full-wave simulations. The simulated/measured axial ratio (AR) remains below 3 dB in the bands 19.4-21.8 GHz (12.5%) and 27.9-30.5 GHz (8.7%) with an insertion loss better than 0.5 dB.

Dual-Band CPW Graphene Antenna for Smart Cities and IoT Applications.

In this paper, a dual-band graphene coplanar waveguide antenna is designed for smart cities and internet of things applications. A graphene film is chosen as the conductive material for the radiation patches and ground plane with a thickness of 240 µm and an electric conductivity of 3.5 × 105 S/m. The dielectric is glass with a dielectric permittivity of 6 and a thickness of 2 mm. The implementation of the antenna on glass permits the integration of the antenna in smart cities and IoT applications. This antenna is based on two trapezoidal patches that generate the dual-band behavior. The overall dimensions of the antenna are 30 mm × 30 mm × 2 mm. The reflection coefficient, gain, and radiation patterns were measured and compared with the simulations. The antenna covers two frequency bands; the lower band covers the 2.45 GHz ISM band, and the upper band range covers from 4 to 7 GHz.