Work Function Tuning of Carbon Electrode to Boost the Charge Extraction in Hole Transport Layer-Free Perovskite Solar Cells.

Perovskite solar cell (PSC) is a promising photovoltaic technology that achieves over 26% power conversion efficiency (PCE). However, the high materials costs, complicated fabrication process, as well as poor long-term stability, are stumbling blocks for the commercialization of the PSCs in normal structures. The hole transport layer (HTL)-free carbon-based PSCs (C-PSCs) are expected to overcome these challenges. However, C-PSCs have suffered from relatively low PCE due to severe energy loss at the perovskite/carbon interface. Herein, the study proposes to boost the hole extraction capability of carbon electrode by incorporating functional manganese (II III) oxide (Mn3O4). It is found that the work function (WF) of the carbon electrode can be finely tuned with different amounts of Mn3O4 addition, thus the interfacial charge transfer efficiency can be maximized. Besides, the mechanical properties of carbon electrode can also be strengthened. Finally, a PCE of 19.03% is achieved. Moreover, the device retains 90% of its initial PCE after 2000 h of storage. This study offers a feasible strategy for fabricating efficient paintable HTL-free C-PSCs.

Modulation of Buried Interface by 1-(3-aminopropyl)-Imidazole for Efficient Inverted Formamidinium-Cesium Perovskite Solar Cells.

Considering the direct influence of substrate surface nature on perovskite (PVK) film growth, buried interfacial engineering is crucial to obtain ideal perovskite solar cells (PSCs). Herein, 1-(3-aminopropyl)-imidazole (API) is introduced at polytriarylamine (PTAA)/PVK interface to modulate the bottom property of PVK. First, the introduction of API improves the growth of PVK grains and reduces the Pb2+ defects and residual PbI2 present at the bottom of the film, contributing to the acquisition of high-quality PVK film. Besides, the presence of API can optimize the energy structure between PVK and PTAA, which facilitates the interfacial charge transfer. Density functional theory (DFT) reveals that the electron donor unit (R-C ═ N) of the API prefers to bind with Pb2+ traps at the PVK interface, while the formation of hydrogen bonds between the R-NH2 of API and I- strengthens the above binding ability. Consequently, the optimum API-treated inverted formamidinium-cesium (FA/Cs) PSCs yields a champion power conversion efficiency (PCE) of 22.02% and exhibited favorable stability.

Choline Derivative as a Multifunctional Interfacial Bridge through Synergistic Effects for Improving the Efficiency and Stability of Perovskite Solar Cells.

The interfacial carrier non-radiative recombination caused by buried defects in electron transport layer (ETL) material and the energy barrier severely hinders further improvement in efficiency and stability of perovskite solar cells (PSCs). In this study, the effect of the SnO2 ETL doped with choline chloride (CC), acetylcholine chloride (AC), and phosphocholine chloride sodium salt (PCSS) are investigated. These dopants modify the interface between SnO2 ETL and perovskite layer, acting as a bridge through synergistic effects to form uniform ETL films, enhance the interface contact, and passivate defects. Ultimately, compared with CC (which with ─OH) and AC (which with C═O), the PCSS with P═O and sodium ions groups is more beneficial for improving performance. The device based on PCSS-doped SnO2 ETL achieves an efficiency of 23.06% with a high VOC of 1.2 V, which is considerably higher than the control device (20.55%). Moreover, after aging for 500 h at a temperature of 25 °C and relative humidity (RH) of 30-40%, the unsealed device based on SnO2-PCSS ETL maintains 94% of its initial efficiency, while the control device only 80%. This study provides a meaningful reference for the design and selection of ideal pre-buried additive molecules.

Novel Bilayer SnO2 Electron Transport Layers with Atomic Layer Deposition for High-Performance α-FAPbI3 Perovskite Solar Cells.

Perovskite solar cells (PSCs) based on the SnO2 electron transport layer (ETL) have achieved remarkable photovoltaic efficiency. However, the commercial SnO2 ETLs show various shortcomings. The SnO2 precursor is prone to agglomeration, resulting in poor morphology with numerous interface defects. Additionally, the open circuit voltage (Voc ) would be constrained by the energy level mismatch between the SnO2 and the perovskite. And, few studies designed SnO2 -based ETLs to promote crystal growth of PbI2 , a crucial prerequisite for obtaining high-quality perovskite films via the two-step method. Herein, we proposed a novel bilayer SnO2 structure that combined the atomic layer deposition (ALD) and sol-gel solution to well address the aforementioned issues. Due to the unique conformal effect of ALD-SnO2 , it can effectively modulate the roughness of FTO substrate, enhance the quality of ETL, and induce the growth of PbI2 crystal phase to develop the crystallinity of perovskite layer. Furthermore, a created built-in field of the bilayer SnO2 can help to overcome the electron accumulation at the ETL/perovskite interface, leading to a higher Voc and fill factor. Consequently, the efficiency of PSCs with ionic liquid solvent increases from 22.09% to 23.86%, maintaining 85% initial efficiency in a 20% humidity N2 environment for 1300 h.

A simple strategy to obtain graphitic carbon nitride modified TiO2layer for efficient perovskite solar cells.

The power conversion efficiency (PCE) of perovskite solar cells (PSCs) can be improved through the concurrent strategies of enhancing charge transfer and passivating defects. Graphite carbon nitride (g-C3N4) has been demonstrated as a promising modifier for optimizing energy level alignment and reducing defect density in PSCs. However, its preparation process can be complicated. A simple one-step calcination approach was used in this study to prepare g-C3N4-modified TiO2via the incorporation of urea into the TiO2precursor. This modification simultaneously tunes the energy level alignment and passivates interface defects. The comprehensive research confirms that the addition of moderate amounts of g-C3N4to TiO2results in an ideal alignment of energy levels with perovskite, thereby enhancing the ability to separate and transfer charges. Additionally, the g-C3N4-modified perovskite films exhibit an increase in grain size and crystallinity, which reduces intrinsic defects density and extends charge recombination time. Therefore, the g-C3N4-modified PSC achieves a champion PCE of 20.00%, higher than that of the control PSC (17.15%). Our study provides a systematic comprehension of the interfacial engineering strategy and offers new insights into the development of high-performance PSCs.

Effects of HAT-CN Layer Thickness on Molecular Orientation and Energy-Level Alignment with ZnPc.

Efficient energy-level alignment is crucial for achieving high performance in organic electronic devices. Because the electronic structure of an organic semiconductor is significantly influenced by its molecular orientation, comprehensively understanding the molecular orientation and electronic structure of the organic layer is essential. In this study, we investigated the interface between a 1,4,5,8,9,11-hexaazatriphenylene hexacarbonitrile (HAT-CN) hole injection layer and a zinc-phthalocyanine (ZnPc) p-type organic semiconductor. To determine the energy-level alignment and molecular orientation, we conducted in situ ultraviolet and X-ray photoelectron spectroscopies, as well as angle-resolved X-ray absorption spectroscopy. We found that the HAT-CN molecules were oriented relatively face-on (40°) in the thin (5 nm) layer, whereas they were oriented relatively edge-on (62°) in the thick (100 nm) layer. By contrast, ZnPc orientation was not significantly altered by the underlying HAT-CN orientation. The highest occupied molecular orbital (HOMO) level of ZnPc was closer to the Fermi level on the 100 nm thick HAT-CN layer than on the 5 nm thick HAT-CN layer because of the higher work function. Consequently, a considerably low energy gap between the lowest unoccupied molecular orbital level of HAT-CN and the HOMO level of ZnPc was formed in the 100 nm thick HAT-CN case. This may improve the hole injection ability of the anode system, which can be utilized in various electronic devices.

Passivating Defects at the Bottom Interface of Perovskite by Ethylammonium to Improve the Performance of Perovskite Solar Cells.

The interface of perovskite solar cells (PSCs) plays a significant role in influencing their performance, yet there is still scarce research focusing on their difficult-to-expose bottom interfaces. Herein, ethylammonium bromide (EABr) is introduced into the bottom interface and its passivation effects are studied directly. First, EABr can improve substrate wettability, which is beneficial for the perovskite-film deposition. By lifting off the perovskite film spontaneously from the substrate, it is found that EABr can significantly reduce the amount of unreacted PbI2 at the bottom interface. These PbI2 crystals have been recently identified as a major defect source and degradation site for perovskite film. Meanwhile, EABr also lifts the valence band maximum at the bottom side of perovskite from -5.38 to -5.09 eV, facilitating better hole transfer. Such a improvement is also verified by the study of charge carrier dynamics. Through introducing EABr, all photovoltaic parameters of the inverted PSCs are improved, and their power conversion efficiency (PCE) increases from 20.41% to 21.06%. The study highlights the importance of direct characterization of the bottom interface for a better passivation effect.

Optimizing Intermolecular Interactions and Energy Level Alignments of Red TADF Emitters for High-Performance Organic Light-Emitting Diodes.

Adequately harvesting all excitons in a single molecule and inhibiting exciton losses caused by intermolecular interactions are two important factors for achieving high efficiencies thermally activated delayed fluorescence (TADF). One potential approach for optimizing these is to tune alignment of various excited state energy levels by using different doping concentrations. Unfortunately, emission efficiencies of most TADF emitters decrease rapidly with concentrations which limits the window for energy level tunning. In this work, by introducing a spiro group to increase steric hindrance of a TADF emitter (BPPXZ) with a phenoxazine and a dibenzo[a,c]phenazine, emission efficiency of the resulting molecule (BPSPXZ) is much less affected by concentration increase. This enables exploitation of the concentration effects to tune energy levels of its excited states for obtaining simultaneously small singlet-triplet energy offset and large spin-orbital coupling, leading to high-efficiency reverse intersystem crossing. With these merits, organic light-emitting diodes (OLEDs) using the BPSPXZ emitter from 5 to 60 wt% doping can all deliver EQE of over 20%. More importantly, record-high EQEs of 33.4% and 15.8% are respectively achieved in the optimized and nondoped conditions. This work proposes a strategy for developing red TADF emitters by optimizing the intermolecular interaction and energy level alignments to facilitate exciton utilization over wide doping concentrations.

Selection, Preparation and Application of Quantum Dots in Perovskite Solar Cells.

As the third generation of new thin-film solar cells, perovskite solar cells (PSCs) have attracted much attention for their excellent photovoltaic performance. Today, PSCs have reported the highest photovoltaic conversion efficiency (PCE) of 25.5%, which is an encouraging value, very close to the highest PCE of the most widely used silicon-based solar cells. However, scholars have found that PSCs have problems of being easily decomposed under ultraviolet (UV) light, poor stability, energy level mismatch and severe hysteresis, which greatly limit their industrialization. As unique materials, quantum dots (QDs) have many excellent properties and have been widely used in PSCs to address the issues mentioned above. In this article, we describe the application of various QDs as additives in different layers of PSCs, as luminescent down-shifting materials, and directly as electron transport layers (ETL), light-absorbing layers and hole transport layers (HTL). The addition of QDs optimizes the energy level arrangement within the device, expands the range of light utilization, passivates defects on the surface of the perovskite film and promotes electron and hole transport, resulting in significant improvements in both PCE and stability. We summarize in detail the role of QDs in PSCs, analyze the perspective and associated issues of QDs in PSCs, and finally offer our insights into the future direction of development.

Synergy Effect of a π-Conjugated Ionic Compound: Dual Interfacial Energy Level Regulation and Passivation to Promote Voc and Stability of Planar Perovskite Solar Cells.

Defects and energy offsets at the bulk and heterojunction interfaces of perovskite are detrimental to the efficiency and stability of perovskite solar cells (PSCs). Herein, we designed an amphiphilic π-conjugated ionic compound (QAPyBF4 ), implementing simultaneous defects passivation and interface energy level alignments. The p-type conjugated cations passivated the surface trap states and optimized energy alignment at the perovskite/hole transport layer. The highly electronegative [BF4 ]- enriched at the SnO2 interface featured desired band alignment due to the dipole moment of this interlayer. The planar n-i-p PSC had an efficiency of 23.1 % with Voc of 1.2 V. Notably, the synergy effect elevated the intrinsic endothermic decomposition temperature of the perovskite. The modified devices showed excellent long-term thermal (85 °C) and operational stability at the maximum power point for 1000 h at 45 °C under continuous one-sun illumination with no appreciable efficiency loss.

Benefitting from Synergistic Effect of Anion and Cation in Antimony Acetate for Stable CH3 NH3 PbI3 -Based Perovskite Solar Cell with Efficiency Beyond 21.

Both the film quality and the electronic properties of halide perovskites have significant influences on the photovoltaic performance of perovskite solar cells (PSCs) because both of them are closely related to the charge carrier transportation, separation, and recombination processes in PSCs. In this work, an additive engineering strategy using antimony acetate (Sb(Ac)3 ) is employed to enhance the photovoltaic performance of methylammonium lead iodide (MAPbI3 )-based PSCs by improving the film quality and optimizing the photoelectronic properties of halide perovskites. It is found that Ac- and Sb3+ of Sb(Ac)3 play different roles and their synergistic effect contributed to the eventual excellent photovoltaic performance of MAPbI3 -based PSCs with a power conversion efficiency of above 21%. The Ac- anions act as a crystal growth controller and are more involved in the improvement of perovskite film morphology. By comparison, Sb3+ cations are more involved in the optimization of the electronic structure of perovskites to tailor the energy levels of the perovskite film. Furthermore, with the assistance of Sb(Ac)3 , MAPbI3 -based PSCs deliver much improved moisture, air, and thermal stability. This work can provide scientific insights on the additive engineering for improving the efficiency and long-term stability of MAPbI3 -based PSCs, facilitating the further development of perovskite-based optoelectronics.

Creating a Dual-Functional 2D Perovskite Layer at the Interface to Enhance the Performance of Flexible Perovskite Solar Cells.

Flexible perovskite solar cells (f-PSCs) have been attracting tremendous attention due to their potentially commercial prospects in flexible energy system and mobile energy system. Reducing the energy barriers and charge extraction losses at the interfaces between perovskite and charge transport layers is essential to improve both efficiency and stability of f-PSCs. Herein, 4-trifluoromethylphenylethylamine iodide (CF3 PEAI) is introduced to form a 2D perovskite at the interface between perovskite and hole transport layer (HTL). It is found that the 2D perovskite plays a dual-functional role in aligning energy band between perovskite and HTL and passivating the traps in the 3D perovskite, thus reducing energy loss and charge carrier recombination at the interface, facilitating the hole transfer from perovskite to the Spiro-OMeTAD. Consequently, the photovoltaic performance of f-PSCs is significantly improved, leading to a power conversion efficiency (PCE) of 21.1% and a certified PCE of 20.5%. Furthermore, the long-term stability of f-PSCs is greatly improved through the protection of 2D perovskite layer to the underlying 3D perovskite. This work provides an excellent strategy to produce efficient and stable f-PSCs, which will accelerate their potential applications.

Application of quantum dots in perovskite solar cells.

Perovskite solar cells (PSCs) are important candidates for next-generation thin-film photovoltaic technology due to their superior performance in energy harvesting. At present, their photoelectric conversion efficiencies (PCEs) are comparable to those of silicon-based solar cells. PSCs usually have a multi-layer structure. Therefore, they face the problem that the energy levels between adjacent layers often mismatch each other. Meanwhile, large numbers of defects are often introduced due to the solution preparation procedures. Furthermore, the perovskite is prone to degradation under ultraviolet (UV) irradiation. These problems could degrade the efficiency and stability of PSCs. In order to solve these problems, quantum dots (QDs), a kind of low-dimensional semiconductor material, have been recently introduced into PSCs as charge transport materials, interfacial modification materials, dopants and luminescent down-shifting materials. By these strategies, the energy alignment and interfacial conditions are improved, the defects are efficiently passivated, and the instability of perovskite under UV irradiation is suppressed. So the device efficiency and stability are both improved. In this paper, we overview the recent progress of QDs' utilizations in PSCs.

Interfaces and Interfacial Layers in Inorganic Perovskite Solar Cells.

Owing to their superior thermal stability, metal halide inorganic perovskite materials continue to attract interest for photovoltaics applications. The highest reported power conversion efficiency (PCE) for solar cells based on inorganic perovskites is over 20 %. As this PCE corresponds to 73 % of the theoretical limit, there remains more room for further improving the device PCEs than for improving organic-inorganic hybrid perovskite solar cells (PSCs). The main loss is in the photovoltage, which is limited by interfaces in terms of non-radiative recombination caused by traps and energy-level mismatch. Furthermore, inefficient charge extraction at interfacial contacts reduces the photocurrent and fill factor. This Minireview summarizes the recent developments in the fundamental understanding of how the interfaces and interfacial layers influence the performance of solar cells based on inorganic perovskite absorbers. An outlook for the development of highly efficient and stable inorganic PSCs from the interface point of view is also given.

Robust Molecular Dipole-Enabled Defect Passivation and Control of Energy-Level Alignment for High-Efficiency Perovskite Solar Cells.

The ability to passivate defects and modulate the interface energy-level alignment (IEA) is key to boost the performance of perovskite solar cells (PSCs). Herein, we report a robust route that simultaneously allows defect passivation and reduced energy difference between perovskite and hole transport layer (HTL) via the judicious placement of polar chlorine-terminated silane molecules at the interface. Density functional theory (DFT) points to effective passivation of the halide vacancies on perovskite surface by the silane chlorine atoms. An integrated experimental and DFT study demonstrates that the dipole layer formed by the silane molecules decreases the perovskite work function, imparting an Ohmic character to the perovskite/HTL contact. The corresponding PSCs manifest a nearly 20 % increase in power conversion efficiency over pristine devices and a markedly enhanced device stability. As such, the use of polar molecules to passivate defects and tailor the IEA in PSCs presents a promising platform to advance the performance of PSCs.

Strategically Constructed Bilayer Tin (IV) Oxide as Electron Transport Layer Boosts Performance and Reduces Hysteresis in Perovskite Solar Cells.

Nanostructured tin (IV) oxide (SnO2 ) is emerging as an ideal inorganic electron transport layer in n-i-p perovskite devices, due to superior electronic and low-temperature processing properties. However, significant differences in current-voltage performance and hysteresis phenomena arise as a result of the chosen fabrication technique. This indicates enormous scope to optimize the electron transport layer (ETL), however, to date the understanding of the origin of these phenomena is lacking. Reported here is a first comparison of two common SnO2 ETLs with contrasting performance and hysteresis phenomena, with an experimental strategy to combine the beneficial properties in a bilayer ETL architecture. In doing so, this is demonstrated to eliminate room-temperature hysteresis while simultaneously attaining impressive power conversion efficiency (PCE) greater than 20%. This approach highlights a new way to design custom ETLs using functional thin-film coatings of nanomaterials with optimized characteristics for stable, efficient, perovskite solar cells.

Hybrid density functional study on the electronic structures and properties of P3HT-PbS and P3HT-CdS hybrid interface for photovoltaic applications.

The efficiency of charge transport mainly depends on the interfacial energy level alignment between the conjugated polymer and the inorganic substrate. It provides an accurate understanding, predicting as well as controlling the optimal power conversion efficiency of various type of hybrid photovoltaic systems. In this article, we use hybrid functional (HSE06) to study the electronic structures and properties at the interface of poly(3-hexylthiophene)(P3HT)/CdS and P3HT/PbS for solar cell applications. We found that the dangling bonds at the inorganic surface introduce in-gap states and greatly reduce the device performance. We used pseudo-hydrogen atoms as the passivation agent to remove the dangling bonds and eliminate the in-gap states to construct the energy alignment at the hybrid interface. The calculated interfacial density of states reveal a better performance in P3HT/CdS, compared to P3HT/PbS. P3HT/CdS possesses a LUMOP3HT /CBMCdS and HOMOP3HT /VBMCdS energy offset large enough for sufficient exciton separation across the interface and prevents charge recombination. In contrast, the reason for low power conversion efficiency in P3HT/PbS lies on its HOMOP3HT /VBMPbS offset which is too small to break the exciton binding energy for charge separation. Moreover, we reported the dependency of the energy level alignment and open circuit voltage on the interfacial molecular orientations. Our DFT calculation can be used to predict candidate materials for the development of efficiency optoelectronic devices. © 2018 Wiley Periodicals, Inc.

Tailoring the Interfacial Chemical Interaction for High-Efficiency Perovskite Solar Cells.

The ionic nature of perovskite photovoltaic materials makes it easy to form various chemical interactions with different functional groups. Here, we demonstrate that interfacial chemical interactions are a critical factor in determining the optoelectronic properties of perovskite solar cells. By depositing different self-assembled monolayers (SAMs), we introduce different functional groups onto the SnO2 surface to form various chemical interactions with the perovskite layer. It is observed that the perovskite solar cell device performance shows an opposite trend to that of the energy level alignment theory, which shows that chemical interactions are the predominant factor governing the interfacial optoelectronic properties. Further analysis verifies that proper interfacial interactions can significantly reduce trap state density and facilitate the interfacial charge transfer. Through use of the 4-pyridinecarboxylic acid SAM, the resulting perovskite solar cell exhibits striking improvements to the reach the highest efficiency of 18.8%, which constitutes an ∼10% enhancement compared to those without SAMs. Our work highlights the importance of chemical interactions at perovskite/electrode interfaces and paves the way for further optimizing performances of perovskite solar cells.

Electronic Properties of Optically Switchable Photochromic Diarylethene Molecules at the Interface with Organic Semiconductors.

Light-switching-induced changes in the electronic properties of photochromic diarylethene, i.e., 1,2-bis(2-methyl-5-p-tolylthiophen-3-yl)cyclopent-1-ene (DAE1), thin films at interfaces to a gold electrode and two polymer semiconductors are investigated by direct and inverse photoelectron spectroscopy. The photoisomerization is achieved by in situ irradiation of ultraviolet and visible light. Efficient and reversible switching between the open and closed isomers of DAE1 is evidenced at all interfaces, with profound impact on the energy-level alignment. The frontier occupied level of DAE1 changes by 0.8 eV with respect to the Au Fermi level upon switching. Corresponding sizable changes in the electron and transport level offsets between the two polymers and DAE1 in its open and closed form are determined. This gives rise to fundamentally different functionality of these interfaces in terms of charge transport. Our study proves the viability of light-controlled energy-level manipulation at various interfaces in photoswitchable opto-electronic devices.

Reliable energy level alignment at physisorbed molecule-metal interfaces from density functional theory.

A key quantity for molecule-metal interfaces is the energy level alignment of molecular electronic states with the metallic Fermi level. We develop and apply an efficient theoretical method, based on density functional theory (DFT) that can yield quantitatively accurate energy level alignment information for physisorbed metal-molecule interfaces. The method builds on the "DFT+Σ" approach, grounded in many-body perturbation theory, which introduces an approximate electron self-energy that corrects the level alignment obtained from conventional DFT for missing exchange and correlation effects associated with the gas-phase molecule and substrate polarization. Here, we extend the DFT+Σ approach in two important ways: first, we employ optimally tuned range-separated hybrid functionals to compute the gas-phase term, rather than rely on GW or total energy differences as in prior work; second, we use a nonclassical DFT-determined image-charge plane of the metallic surface to compute the substrate polarization term, rather than the classical DFT-derived image plane used previously. We validate this new approach by a detailed comparison with experimental and theoretical reference data for several prototypical molecule-metal interfaces, where excellent agreement with experiment is achieved: benzene on graphite (0001), and 1,4-benzenediamine, Cu-phthalocyanine, and 3,4,9,10-perylene-tetracarboxylic-dianhydride on Au(111). In particular, we show that the method correctly captures level alignment trends across chemical systems and that it retains its accuracy even for molecules for which conventional DFT suffers from severe self-interaction errors.