RESUMO
DNA-sensitive fluorescent light-up probes based on berberine are presented. This biogenic fluorophore was chosen as central unit to use its potential biocompatibility and its DNA-binding properties. To provide predictable fluorescence quenching in aqueous solution and a fluorescence light-up effect upon DNA binding, aryl substituents were attached at the 9-position by Suzuki-Miyaura coupling reactions. The 9-arylberberine derivatives have a very low fluorescence quantum yield (Φfl =<0.02), which is caused by the radiationless deactivation of the excited state by torsional relaxation about the biaryl axis. In addition, these berberine derivatives intercalate into DNA with high affinity (Kb =2.0-22×104 â M-1 ). Except for the nitrophenyl- and hydroxyphenyl-substituted derivatives, all tested compounds exhibited a pronounced fluorescence light-up effect upon association with DNA, because the deactivation of the excited-state by torsional relaxation is suppressed in the DNA binding site. Most notably, it was shown exemplarily with the 9-(4-methoxyphenyl)- and the 9-(6-methoxynaphthyl)-substituted derivatives that these properties are suited for fluorimetric cell analysis. In particular, these probes generated distinct staining patterns in eukaryotic cells (NIH 3T3 mouse fibroblasts), which enabled the identification of nuclear substructures, most likely heterochromatin or nucleoli, respectively.
Assuntos
Berberina , Corantes Fluorescentes , Animais , Camundongos , Corantes Fluorescentes/química , Berberina/química , Fluorometria , DNA/química , Sítios de LigaçãoRESUMO
Styrylbenzazoles form a promising yet under-represented class of photoswitches that can perform a light-driven E-Z isomerization of the central alkene double bond without undergoing irreversible photocyclization, typical of the parent stilbene. In this work, we report the synthesis and photochemical study of 23 styrylbenzazole photoswitches. Their thermal stabilities, quantum yields, maximum absorption wavelengths and photostationary state (PSS) distributions can be tuned by changing the benzazole heterocycle and the substitution pattern on the aryl ring. In particular, we found that push-pull systems show large redshifts of the maximum absorption wavelengths and the highest quantum yields, whereas ortho-substituted styrylbenzazole photoswitches exhibit the most favorable PSS ratios. Taking advantage of both design principles, we produced 2,6-dimethyl-4-(dimethylamino)-styrylbenzothiazole, a thermally stable and efficient P-type photoswitch which displays negative photochromism upon irradiation with visible light up to 470â nm to obtain a near-quantitative isomerization with a very high quantum yield of 59 %. Furthermore, 4-hydroxystyrylbenzoxazole was demonstrated to be a pH-sensitive switch which exhibits a 100â nm redshift upon deprotonation. Ortho-methylation of its benzothiazole analogue improved the obtained PSS ratio in its deprotonated state from E : Z=53 : 47 to E : Z=18 : 82. We anticipate that this relatively unexplored class of photoswitches will form a valuable expansion of the current family of photoswitches.
RESUMO
N-Selective carbamoylation reaction of oximes with isocyanates generates nitrones, which undergo 1,3-dipolar cycloaddition with various dipolarophiles to afford diverse isoxazolidines. Notably, combinations of highly electron-rich oxime and highly electron-deficient dipolarophile exhibited high reactivity, with product yields of up to 94 %. The substituent on the isoxazolidine-nitrogen atom could be successfully removed without loss of the cyclic structure. Computational studies have also elucidated the mechanism of the reaction and origin of stereoselectivity.
RESUMO
Three hybrid electrochemical protocols, which involve the energy transfer, direct photolysis and N-hydroxyphthalimide catalyst, respectively, are presented for the selenylation/cyclization of the fragile substrates of 3-aza-1,5-dienes with diorganyl diselenides to afford 3-selenomethyl-4-pyrrolin-2-ones. The two electrophotocatalytic reactions and the indirect electrolysis one are both regioselective and external-oxidant- and transition-metal-free, and are associated with a broad substrate scope and high Se-economy, and all three methods are amenable to gram-scale syntheses, late-stage functionalizations, sunlight-induced experiments and all-solar-driven syntheses.
RESUMO
Five novel styrylnaphthyridine derivatives were synthesized and shown to operate as photoswitchable, selective ligands for abasic site-containing DNA (AP-DNA), which is an important therapeutic and diagnostic target. These compounds associate with AP-DNA with binding constants of 0.5-8.4×104â M-1 as shown by photometric and fluorimetric titrations. Specifically, these ligands bind preferentially to AP-DNA relative to regularly paired duplex DNA. As a special feature, the association of these ligands with DNA can be controlled by means of a reversible [2+2] photocycloaddition. Upon irradiation at 420â nm the photodimer is formed, which does not bind to AP-DNA. In turn, the naphthyridine is regained with excitation at 315â nm. Most notably, this photoinduced deactivation and release of the DNA ligand can be performed inâ situ in the presence of AP-DNA, thus providing a tool for on-demand delivery of a DNA binder. Overall, these results provide a promising starting point for the development of functional AP-DNA ligands whose bioactivity can be modulated by light with local and temporal control.
Assuntos
Reação de Cicloadição , DNA , Naftiridinas , Ligantes , DNA/química , Naftiridinas/química , Processos Fotoquímicos , Sítios de LigaçãoRESUMO
A simple and effective organolithium approach to the synthesis of 2-substituted benzo[cd]indoles from peri-dihalonaphthalenes and nitriles has been developed. The reaction proceeds via a surprisingly easy intramolecular aromatic nucleophilic substitution facilitated by the "clothespin effect". The discovered transformation provides good isolated yields, allows usage of an extensive range of nitriles, and demonstrates a good substituents tolerance. UV-absorption and NMR spectra of the obtained benzo[cd]indoles and their protonated forms demonstrated exclusive protonation to the indole nitrogen atom even in the presence of two NMe2 groups in positions 5 and 6 (i. e. "proton sponge" moiety).
RESUMO
When bismuth atoms are incorporated into cyclic organic systems, this commonly goes along with strained or distorted molecular geometries, which can be exploited to modulate the physical and chemical properties of these compounds. In six-membered heterocycles, bismuth atoms are often accompanied by oxygen, sulfur or nitrogen as a second hetero-element. In this work, we present the first examples of six-membered rings, in which two CH units are replaced by BiX moieties (X=Cl, Br, I), resulting in dihydro-anthracene analogs. Their behavior in chemically reversible reduction reactions is explored, aiming at the generation of dibisma-anthracene (bismanthrene). Heterometallic compounds (Bi/Fe, Bi/Mn) are introduced as potential bismanthrene surrogates, as supported by bismanthrene-transfer to selenium. Analytical techniques used to investigate the reported compounds include NMR spectroscopy, high-resolution mass spectrometry, single-crystal X-ray diffraction analyses, and DFT calculations.
RESUMO
Novel rhodium-catalyzed [3+3] annulations of diazoenals and α-amino ketones has been disclosed here. The reactivity of diazoenals has been switched from carbenoid to vinylogous NH-insertion by altering acyclic to cyclic α-amino ketones. In this direction, we report an efficient strategy to synthesize 1,2-dihydropyridines (DHPs) and fused 1,4-oxazines. Mechanistic investigation revealed that the formyl group is necessary for carbenoid [3+3] annulation and the cyclohexyl group is the dictating factor for vinylogous NH- insertion. The synthetic utility of 1,2-dihydropyridines was demonstrated by synthesizing piperidine, pyrido[1,2-a]indole, and 2-pyridone scaffolds. Further, structural diversification of fused 1,4-oxazines resulted in the short synthesis of hexahydroquinolin-2(1H)-ones, hexahydro quinolines and tetrahydroquinolinones via ring opening rearrangement and a new oxidative deformylation, respectively.
RESUMO
We report an approach to the diastereoselective synthesis of 1,2-disubstituted heterocyclic aziridines. A Brønsted acid-catalyzed conjugate addition of anilines to trisubstituted heterocyclic chloroalkenes provides an intermediate 1,2-chloroamine. Diastereocontrol was found to vary significantly with solvent selection, with computational modelling confirming selective, spontaneous fragmentation in the presence of trace acids, proceeding through a pseudo-cyclic, protonated intermediate and transition state. These chloroamines can then be converted to the aziridine by treatment with LiHMDS with high stereochemical fidelity. This solvent-induced stereochemical enrichment thereby enables an efficient route to rare cis-aziridines with high dr. The scope, limitations, and mechanistic origins of selectivity are also presented.
RESUMO
A safe and efficient method for the in-situ preparation of (diazomethyl)dimethylphosphine oxide - a hereto unexplored diazoalkane reagent - is developed. The method is based on the diazotization of the corresponding P(O)Me2-substituted amine (readily available in multigram quantities) in non-aqueous media. The protocol provides the target product as ca. 1.5â M CHCl3 solution which is stable at -18 °C. The utility of the synthesized diazoalkane is illustrated by its [3+2] cycloaddition with electron-poor alkynes and alkenes providing the corresponding P(O)Me2-substituted pyrazoles and pyrazolines with moderate to good efficiency. In this view, the title compound represents and an important extension of medicinally relevant phosphine oxide reagents.
RESUMO
An electrooxidative C-H functionalization is a widely accepted route to obtain sulfur-containing arenes and heteroarenes. However, this process often involves using non-recyclable supporting electrolytes, (co)solvents like hexafluoroisopropanol, additives like acid, or catalysts. The use of additional reagents can increase costs and waste, reducing atom efficiency. Moreover, unlike other nitrogen-containing heterocycles, there have only been sporadic reports of electrochemical C-H functionalization in fused pyrimidin-4-ones, and an electrolyte-free process has yet to be developed. This work demonstrates that such anodic coupling reactions can be performed in an all-green electrolytic system without using such additional electrolytes or HFIP, maintaining a high atom economy. This C-H functionalization strategy utilizes inexpensive sodium sulfinates and ammonium thiocyanate as sulfonylating and thiocyanating agents in an undivided cell at a constant current, using a mixture of CH3 CN/H2 O as solvent at room temperature. Thus, fused pyrimidin-4-ones can be selectively converted into C3-sulfonylated and -thiocyanated derivatives in moderate to good yields.
RESUMO
Electrochemically generated hypervalent iodine(III) species are powerful reagents for oxidative C-N coupling reactions, providing access to valuable N-heterocycles. A new electrocatalytic hypervalent iodine(III)-mediated in-cell synthesis of 1H-N-aryl-3,4-dihydroquinolin-2-ones by dehydrogenative C-N bond formation is presented. Catalytic amounts of the redox mediator, a low supporting electrolyte concentration and recycling of the solvent used make this method a sustainable alternative to electrochemical ex-cell or conventional approaches. Furthermore, inexpensive, readily available electrode materials and a simple galvanostatic set-up are applied. The broad functional group tolerance could be demonstrated by synthesizing 23 examples in yields up to 96 %, with one reaction being performed on a 10-fold higher scale. Based on the obtained results a sound reaction mechanism could be proposed.
RESUMO
The [1,2]-Brook rearrangement stands as a potent technique for constructing complex molecules. In this study, we showcase its power in the dearomatization of aromatic N-heterocycles. Through a concise four-step process that integrates lithiation, nucleophilic addition, Brook rearrangement and dearomatization reaction, we demonstrate a versatile strategy for generating diverse non-aromatic N-heterocycles which exhibit ambident reactivities. Various acyl silanes, halo-pyridines, and quinolines have been explored within this context. The synthetic utility of this methodology is demonstrated through the construction of complex architectures.
RESUMO
In one-dimensional polycyclic aromatic hydrocarbons (PAHs) containing five- and six-membered rings fused together, one key question is whether the structures possess a quinoidal or aromatic diradical character. Here, we generate such PAHs by reversible oxidation of PAH-extended tetrathiafulvalenes (TTFs). Extended TTFs were thus prepared and studied for their geometrical properties (crystallography), redox properties, and UV/Vis/NIR/EPR characteristics as a function of charge state. The EPR measurements of radical cations showed unique features for each PAH-TTF. The dications, formally composed of fluoreno[3,2-b]fluorene and diindeno[1,2-b:1',2'-i]anthracene cores, were experimentally found to exhibit singlet ground states. For the latter, calculations reveal the closed shell, quinoid singlet state to be isoenergetic with the open shell singlet diradical. Each charge state exhibited unique optical properties with radical cations absorbing strongly in the NIR region with signatures from π-dimers for the large core. The experimental results were paralleled and supported by detailed computations, including spin density distribution calculations, EPR simulations, and nucleus independent chemical shift (NICS) xy scans.
RESUMO
Starting from C6 H4 (PCl2 )2 and the TMS-substituted ylide (TMS)2 C=PR3 (TMS=trimethylsilyl, R=p-tolyl), the phosphonium-substituted diphosphaindenylide PPI was prepared in two steps. CASSCF calculations as well as the reactivity toward diphenyl acetylene suggest a notable biradical character in PPI. Reaction with [Cr(CO)3 (MeCN)3 ] affords the complex [Cr(CO)3 (η5 -PPI)] (5). This complex was employed to explore the ligand properties of PPI, which demonstrates considerable potential through the combination of strong metal-ligand interactions and the possibility of a pronounced indenyl effect.
RESUMO
Hexakis(4-trimethylsilylpyrazol-1-yl)ethane was synthesized by the oxidative dimerization of tris(4-trimethylsilylpyrazol-1-yl)methane. Single-crystal X-ray structural analysis of hexakis(4-trimethylsilylpyrazol-1-yl)ethane showed that the ethane C-C bond (1.623(4)â Å) is shorter than that in hexaphenylethane (1.67(3)â Å). In solution, hexakis(4-trimethylsilylpyrazol-1-yl)ethane existed as a single species, contrastive that conventional hexaphenylethanes can keep the central C-C bond only by the aid of additional bridges between the two triarylmethyl units. Theoretical calculations indicated that the tris(pyrazol-1-yl)methyl radical, which is anticipated to be under equilibrium with hexakis(pyrazol-1-yl)ethane, is less stable than trityl radicals due to lack of delocalization of the radicals. Furthermore, introduction of pyrazole groups allowed additional bridging between the two triarylmethyl moieties through metal coordination to the adjacent N atoms: hexakis(4-trimethylsilylpyrazol-1-yl)ethane exhibited unique coordination to three Ag atoms affording a hexaarylethane analog bearing three N-Ag-N bridges.
RESUMO
Benzene is one of the most ubiquitous structural motifs in chemistry. The valence isomers of benzene have also attracted synthetic chemists' attention due to their unique structures, bonding, and reactivity. We have been investigating boron-nitrogen-containing benzene valence isomers via photoisomerization of 1,2-azaborines. In this contribution, we summarize recent developments of these highly strained BN-heterocyclic compounds including their synthesis, characterization, proposed mechanism of formation, and their potential applications.
RESUMO
The regiodivergent synthesis of 4- and 5-sulfenyl oxazoles from 1,4,2-dioxazoles and alkynyl thioethers has been achieved. Gold-catalysed conditions are used to favour the formation of 5-sulfenyl oxazoles via ß-selective attack of the nitrenoid relative to the sulfenyl group. In contrast, 4-sulfenyl oxazoles are formed by α-selective reaction under Brønsted acid conditions from the same substrates. The nature of stabilising gold-sulfur interactions have been investigated by natural bond orbital analysis, showing that the SâAu interactions are significantly stronger in the intermediate that favours the 5-sulfenyl oxazoles. A kinetic survey identifies catalyst inhibition processes. This study into the regiodivergent methods includes the development of telescoped annulation-oxidation protocols for regioselective access to oxazole sulfoxides and sulfones.
RESUMO
Sterically loaded, anionic pyridine has been synthesized and utilized successfully in the stabilization of a isoleptic series of coinage metal complexes. The treatment of [4-(Ph3B)-2,6-Trip2Py]K (Trip=2,4,6-iPr3C6H2) with CuBr(PPh3), AgCl(PPh3) or AuCl(PPh3) (Py=pyridine) afforded the corresponding [4-(Ph3B)-2,6-Trip2Py]M(PPh3) (M=Au, Ag, Cu) complexes, via salt metathesis, as isolable, crystalline solids. Notably, these reactions avoid the facile single electron transfer chemistry reported with the less bulky ligand systems. The X-ray structures revealed that they are two-coordinate metal adducts. The M-N and M-P bond distances are longest in the silver and shortest in the copper adduct among the three group 11 family members. Computational analysis revealed an interesting stability dependence on steric bulk of the anionic pyridine (i. e., pyridyl borate) ligand. A comparison of structures and bonding of [4-(Ph3B)-2,6-Trip2Py]Au(PPh3) to pyridine and m-terphenyl complexes, {[2,6-Trip2Py]Au(PPh3)}[SbF6] and [2,6-Trip2Ph]Au(PPh3) are also provided. The Au(I) isocyanide complex, [4-(Ph3B)-2,6-Trip2Py]Au(CNBut) has been stabilized using the same anionic pyridylborate illustrating that it can support other gold-ligand moieties as well.
RESUMO
Nickel-catalyzed intramolecular hydrosilylation can be efficiently achieved with high regio- and stereoselectivities through two distinct methodologies. The first approach utilizes a conventional method, involving the reduction of nickel salt (NiBr2-2,2'-bipyridine) using manganese metal. The second method employs a one-step electrochemical reaction, utilizing the sacrificial anode process and NiBr2bipy catalysis. Both methods yield silylated heterocycles in good to high yields through a syn-exo-dig cyclization process. Control experiments and molecular electrochemistry (cyclic voltammetry) provided further insights into the reaction mechanism.