Coarse-Grained Molecular Dynamics Simulation of Heterogeneous Polysorbate 80 Surfactants and their Interactions with Small Molecules and Proteins.

Polysorbate 80 (PS80) is widely used in pharmaceutical formulations, and its commercial grades exhibit certain levels of structural heterogeneity. The objective of this study was to apply coarse-grained molecular dynamics simulations to better understand the effect of PS80 heterogeneity on micelle self-assembly, the loading of hydrophobic small molecules into the micelle core, and the interactions between PS80 and a protein, bovine serum albumin (BSA). Four representative PS80 variants with different head and tail structures were studied. Our simulations found that PS80 structural heterogeneity could affect blank micelle properties such as solvent-accessible surface area, aggregation number, and micelle aspect ratio. It was also found that hydrophobic small molecules such as ethinyl estradiol preferentially partitioned into the PS80 micelle core and PS80 dioleates formed a more hydrophobic core compared to PS80 monooleates. Furthermore, multiple PS80 molecules could bind to BSA, and PS80 heterogeneity profoundly changed the binding ratio as well as the surfactant-protein contact area.

Correlating Differences in the Surface Activity to Interface-Induced Particle Formation in Different Protein Modalities: IgG mAb Versus Fc-Fusion Protein.

The propensity of protein-based biologics to form protein particles during bioprocessing can be related to their interfacial properties. In this study, we compare the surface activity and interfacial film properties of two structurally different biologics, an IgG and Fc-fusion, in the absence and presence of interfacial dilatational stresses, and correlate these differences to their tendency to form interface-induced protein particles. Our results show that interface-induced particle formation is protein-dependent, with the Fc-fusion demonstrating greater interfacial stability. This observation can be correlated with faster adsorption kinetics of the Fc-fusion protein, and formation of a less incompressible film at the air-liquid interface. The addition of polysorbate 80 (PS80), commonly added to mitigate protein particle formation, led to a surfactant-dominant interface for quiescent conditions and coadsorption of protein and surfactant for the Fc-fusion when exposed to interfacial stress. On the other hand, for the IgG molecule, the surface always remained surfactant dominant. Image analysis demonstrated that PS80 was more effective in mitigating particle formation for the IgG than Fc-fusion. This suggests that a surfactant-dominant interface is necessary to prevent interface-induced protein particle formation. Further, while PS80 is effective in mitigating particle formation in the IgG formulation, it may not be the best choice for other protein modalities.

Identification of Surfactant Impact on a Monoclonal Antibody Characterization via HPLC-Separation Based and Biophysical Methods.

PURPOSE OR OBJECTIVE: Surfactants, including polysorbates and poloxamers, play a crucial role in the formulation of therapeutic proteins by acting as solubilizing and stabilizing agents. They help prevent protein aggregation and adsorption, thereby enhancing the stability of drug substance and products., However, it is important to note that utilizing high concentrations of surfactants in protein formulations can present significant analytical challenges, which can ultimately affect the product characterization. METHODS: In our study, we specifically investigated the impact of elevated surfactant concentrations on the characterization of monoclonal antibodies. We employed various analytical techniques including size-exclusion chromatography (SEC), capillary electrophoresis (CE-SDS), a cell based functional assay, and biophysical characterization. RESULTS: The findings of our study indicate that higher levels of Polysorbate 80 (PS-80) have adverse effects on the measured purity, biological activity, and biophysical characterization of biologic samples. Specifically, the elevated levels of PS-80 cause analytical interferences, which can significantly impact the accuracy and reliability of analytical studies. CONCLUSIONS: Our study results highlight a significant risk in analytical investigations, especially in studies involving the isolation and characterization of impurities. It is important to be cautious of surfactant concentrations, as they can become more concentrated during common sample manipulations like buffer exchange. Indeed, the research presented in this work emphasizes the necessity to evaluate the impact on analytical assays when there are substantial alternations in the matrix composition. By doing so, valuable insights can be gained regarding potential challenges associated with assay development and characterization of biologics with complex formulations.

Influence of Surfactant on the Skin Permeation of Methylisothiazolinone and Methylchloroisothiazolinone.

Patch tests are often used in safety evaluations to identify the substance causing skin irritation, but the same substance can sometimes give positive or negative results depending on the test conditions. Here, we investigated differences in the skin penetration of two test compounds under different application conditions. We studied the effects of the anionic surfactant sodium dodecyl sulfate (SDS) and the nonionic surfactant polysorbate 80 (PS) on skin penetration of the preservatives methylisothiazolinone (MT) and methylchloroisothiazolinone (MCT), which are used in cosmetics such as shampoos. The skin permeation of MT was enhanced by SDS but was unchanged by PS. Skin impedance decreased in the presence of SDS whereas PS had the same effect as the control aqueous solution, suggesting that SDS reduction of the barrier function of skin affects the permeation of MT, a hydrophilic drug. Application of a mixture of MCT and MT in the presence of SDS did not affect the skin permeation of MCT whereas the permeation of MT was enhanced by SDS, indicating that the skin permeation of MCT is less affected by SDS than is MT. Thus, attention should be paid to the possible effect of co-solutes, especially hydrophilic drugs.

Updated guidance regarding the risk of allergic reactions to COVID-19 vaccines and recommended evaluation and management: A GRADE assessment and international consensus approach.

This guidance updates 2021 GRADE (Grading of Recommendations Assessment, Development and Evaluation) recommendations regarding immediate allergic reactions following coronavirus disease 2019 (COVID-19) vaccines and addresses revaccinating individuals with first-dose allergic reactions and allergy testing to determine revaccination outcomes. Recent meta-analyses assessed the incidence of severe allergic reactions to initial COVID-19 vaccination, risk of mRNA-COVID-19 revaccination after an initial reaction, and diagnostic accuracy of COVID-19 vaccine and vaccine excipient testing in predicting reactions. GRADE methods informed rating the certainty of evidence and strength of recommendations. A modified Delphi panel consisting of experts in allergy, anaphylaxis, vaccinology, infectious diseases, emergency medicine, and primary care from Australia, Canada, Europe, Japan, South Africa, the United Kingdom, and the United States formed the recommendations. We recommend vaccination for persons without COVID-19 vaccine excipient allergy and revaccination after a prior immediate allergic reaction. We suggest against >15-minute postvaccination observation. We recommend against mRNA vaccine or excipient skin testing to predict outcomes. We suggest revaccination of persons with an immediate allergic reaction to the mRNA vaccine or excipients be performed by a person with vaccine allergy expertise in a properly equipped setting. We suggest against premedication, split-dosing, or special precautions because of a comorbid allergic history.

Polysorbate 80 blocked a peripheral sodium channel, Nav1.7, and reduced neuronal excitability.

Polysorbate 80 is a non-ionic detergent derived from polyethoxylated sorbitan and oleic acid. It is widely used in pharmaceuticals, foods, and cosmetics as an emulsifier. Nav1.7 is a peripheral sodium channel that is highly expressed in sympathetic and sensory neurons, and it plays a critical role in determining the threshold of action potentials (APs). We found that 10 µg/mL polysorbate 80 either abolished APs or increased the threshold of the APs of dorsal root ganglions. We thus investigated whether polysorbate 80 inhibits Nav1.7 sodium current using a whole-cell patch-clamp recording technique. Polysorbate 80 decreased the Nav1.7 current in a concentration-dependent manner with a half-maximal inhibitory concentration (IC50) of 250.4 µg/mL at a holding potential of -120 mV. However, the IC50 was 1.1 µg/mL at a holding potential of -90 mV and was estimated to be 0.9 µg/mL at the resting potentials of neurons, where most channels are inactivated. The activation rate and the voltage dependency of activation of Nav1.7 were not changed by polysorbate 80. However, polysorbate 80 caused hyperpolarizing shifts in the voltage dependency of the steady-state fast inactivation curve. The blocking of Nav1.7 currents by polysorbate 80 was not reversible at a holding potential of -90 mV but was completely reversible at -120 mV, where the channels were mostly in the closed state. Polysorbate 80 also slowed recovery from inactivation and induced robust use-dependent inhibition, indicating that it is likely to bind to and stabilize the inactivated state. Our results indicate that polysorbate 80 inhibits Nav1.7 current in concentration-, state-, and use-dependent manners when used even below commercial concentrations. This suggests that polysorbate 80 may be helpful in pain medicine as an excipient. In addition, in vitro experiments using polysorbate 80 with neurons should be conducted with caution.

Mechanisms of gut epithelial barrier impairment caused by food emulsifiers polysorbate 20 and polysorbate 80.

BACKGROUND: The rising prevalence of many chronic diseases related to gut barrier dysfunction coincides with the increased global usage of dietary emulsifiers in recent decades. We therefore investigated the effect of the frequently used food emulsifiers on cytotoxicity, barrier function, transcriptome alterations, and protein expression in gastrointestinal epithelial cells. METHODS: Human intestinal organoids originating from induced pluripotent stem cells, colon organoid organ-on-a-chip, and liquid-liquid interface cells were cultured in the presence of two common emulsifiers: polysorbate 20 (P20) and polysorbate 80 (P80). The cytotoxicity, transepithelial electrical resistance (TEER), and paracellular-flux were measured. Immunofluorescence staining of epithelial tight-junctions (TJ), RNA-seq transcriptome, and targeted proteomics were performed. RESULTS: Cells showed lysis in response to P20 and P80 exposure starting at a 0.1% (v/v) concentration across all models. Epithelial barrier disruption correlated with decreased TEER, increased paracellular-flux and irregular TJ immunostaining. RNA-seq and targeted proteomics analyses demonstrated upregulation of cell development, signaling, proliferation, apoptosis, inflammatory response, and response to stress at 0.05%, a concentration lower than direct cell toxicity. A proinflammatory response was characterized by the secretion of several cytokines and chemokines, interaction with their receptors, and PI3K-Akt and MAPK signaling pathways. CXCL5, CXCL10, and VEGFA were upregulated in response to P20 and CXCL1, CXCL8 (IL-8), CXCL10, LIF in response to P80. CONCLUSIONS: The present study provides direct evidence on the detrimental effects of food emulsifiers P20 and P80 on intestinal epithelial integrity. The underlying mechanism of epithelial barrier disruption was cell death at concentrations between 1% and 0.1%. Even at concentrations lower than 0.1%, these polysorbates induced a proinflammatory response suggesting a detrimental effect on gastrointestinal health.

Competitive Adsorption of a Monoclonal Antibody and Nonionic Surfactant at the PDMS/Water Interface.

Interfacial adsorption of monoclonal antibodies (mAbs) can cause structural deformation and induce undesired aggregation and precipitation. Nonionic surfactants are often added to reduce interfacial adsorption of mAbs which may occur during manufacturing, storage, and/or administration. As mAbs are commonly manufactured into ready-to-use syringes coated with silicone oil to improve lubrication, it is important to understand how an mAb, nonionic surfactant, and silicone oil interact at the oil/water interface. In this work, we have coated a polydimethylsiloxane (PDMS) nanofilm onto an optically flat silicon substrate to facilitate the measurements of adsorption of a model mAb, COE-3, and a commercial nonionic surfactant, polysorbate 80 (PS-80), at the siliconized PDMS/water interface using spectroscopic ellipsometry and neutron reflection. Compared to the uncoated SiO2 surface (mimicking glass), COE-3 adsorption to the PDMS surface was substantially reduced, and the adsorbed layer was characterized by the dense but thin inner layer of 16 Å and an outer diffuse layer of 20 Å, indicating structural deformation. When PS-80 was exposed to the pre-adsorbed COE-3 surface, it removed 60 wt % of COE-3 and formed a co-adsorbed layer with a similar total thickness of 36 Å. When PS-80 was injected first or as a mixture with COE-3, it completely prevented COE-3 adsorption. These findings reveal the hydrophobic nature of the PDMS surface and confirm the inhibitory role of the nonionic surfactant in preventing COE-3 adsorption at the PDMS/water interface.

Clozapine-loaded nanocapsules improve antipsychotic activity in rats: building a sequential PopPK/PD model to discriminate nanocarriers in the preformulation step.

PURPOSE: We investigated the impact of nanoformulations on the dose-exposure-response relationship of clozapine (CZP), a low-solubility antipsychotic with serious adverse effects, using a popPK/PD approach. METHODS: We evaluated the pharmacokinetics and PK/PD profiles of three coated polymeric CZP-loaded nanocapsules functionalized with polysorbate 80 (NCP80), polyethylene glycol (NCPEG), and chitosan (NCCS). Data on in vitro CZP release by dialysis bag, plasma pharmacokinetic profiles in male Wistar rats (n = 7/group, 5 mg kg-1, i.v.), and percentage of head movements in a stereotyped model (n = 7/group, 5 mg kg-1, i.p.) were integrated using a sequential model building approach (MonolixSuiteTM-2020R1-Simulation Plus). RESULTS: A base popPK model developed with CZP solution data collected after the i.v. administration of CZP was expanded to describe the changes in drug distribution caused by nanoencapsulation. Two additional compartments were inserted into the NCP80 and NCPEG models, and a third compartment was included in the NCCS model. The nanoencapsulation showed a decrease in the central volume of distribution for NCCS (V1NCpop = 0.21 mL), while for FCZP, NCP80, and NCPEG, it was ~1 mL. The peripheral distribution volume was higher for the nanoencapsulated groups (19.1 and 129.45 mL for NCCS and NCP80, respectively) than for FCZP. The popPK/PD model showed a formulation-dependent plasma IC50, with 20-, 50-, and 80-fold reductions compared to the CZP solution (NCP80, NCPEG, and NCCS, respectively). CONCLUSION: Our model discriminates the coatings and describes the peculiar PK and PD behavior of nanoencapsulated CZP, especially NCCS, making it an exciting tool for evaluating the preclinical performance of nanoparticles.

Polysorbate 80 surface modified PLGA nanoparticles: an in-vitro evaluation of cellular uptake and cytotoxicity on neuro-2a cells.

AIM: Present study focuses on the development of P80 coated PLGA Nanoparticles loaded with drugs, paroxetine (P80-Par-PLGA-NPs) and clonidine (P80-CLD-PLGA-NPs) for in-vitro evaluation of Cellular Uptake & Cytotoxicity on Neuro-2a cells. METHOD: P80-Par-PLGA-NPs and P80-CLD-PLGA-NPs were developed and characterised for zeta size, potential, PDI, EE%, DL%, TEM, SEM, FTIR, DSC, in-vitro release, cytotoxicity, histopathological and cell uptake studies using rhodamine loaded P80-NPs. RESULT: Mean particle diameter of P80-Par-PLGA-NPs and P80-CLD-PLGA-NPs was 204; 182.7 nm, ZP of -21.8; -18.72 mV and 0.275; 0.341 PDI, respectively. TEM and SEM images revealed homogenous surface morphology. In-vitro drug release showed sustained and complete release in 72 h. Cell viability (>90%) at Cmax and no cytotoxicity in histopathology was observed. Significant higher uptake (96.9%) of P80-modified-NPS was observed as compared to unmodified-NPs (81%) (p < 0.05). CONCLUSION: The finding clearly indicated a higher cell uptake of drugs via surface modified P80-coated PLGA-NPs as compared to unmodified particles.

SEM Observation of the Filter after Administration of Blinatumomab: A Possibility of Leakage during Home Administration Using a Portable Infusion Pump.

Blinatumomab (Blincyto® injection solution) is classified as a bispecific T-cell engaging (BiTE) antibody and is intended for the treatment of relapsed/refractory acute lymphoblastic leukemia. It requires continuous infusion to maintain therapeutic levels. Therefore, it is often administered at home. Monoclonal antibodies, which are administered intravenously, have the potential to leak depending on the nature of the administration devices. Therefore, we investigated device-associated causes of blinatumomab leakage. We observed no apparent changes to the filter and its materials after exposure to the injection solution and surfactant. From scanning electron microscopic images, precipitate on the surface of the filters was observed after physical stimulation of the injection solution. Therefore, physical stimulations should be avoided during the prolonged administration of blinatumomab. In conclusion, the findings of this study assist in the safe administration of antibodies using portable infusion pumps, taking into consideration the composition of drug excipients and the choice of filter type and structure.

The Polysorbate containing AstraZeneca COVID-19 vaccine is tolerated by polyethylene glycol (PEG) allergic patients.

BACKGROUND: Polyethylene glycol (PEG) is the excipient found in the mRNA COVID-19 vaccines. We previously demonstrated PEG allergy was a cause of severe anaphylaxis to the Pfizer/BioNTech COVID-19 vaccine. PEG is widely used in many household products, cosmetics and medicines. However PEG allergy is rare, there have been few confirmed cases of PEG allergy. The excipient of potential concern in the AstraZeneca COVID-19 vaccine is polysorbate 80 (PS80). Cross-reactivity between PEG and polysorbate has been suggested, based on their composition and skin-test data. The aim of this study was to determine whether PEG-allergic patients could be vaccinated with the PS80 containing AstraZeneca COVID-19 vaccine. METHOD: Eight patients with PEG allergy were identified by the allergy clinic at Cambridge University Hospital. Patients underwent skin prick testing to PS80 (20%) and to the AstraZeneca COVID-19 vaccine prior to vaccination. RESULTS: All eight patients allergic to PEG tolerated the AstraZeneca COVID-19 vaccine, even in 2 patients where the PS80 skin prick test was positive and 1 with a positive skin prick test to the AstraZeneca COVID-19 vaccine. CONCLUSION: Patients allergic to PEG, previously denied COVID vaccination, may now be safely vaccinated with the PS80 containing AstraZeneca vaccine and need only avoid the PEG-containing mRNA COVID-19 vaccines. This opens up the possibility that these patients will also tolerate other vaccines containing PS80 such as the Janssen/Johnson and Johnson COVID-19 vaccine. Clinical cross-reactivity between PEG and PS80 did not occur in this vaccine setting.

Polysorbate 80 and histidine quantitative analysis by NMR in the presence of virus-like particles.

Polysorbate-80 (PS80) and histidine are common excipients in vaccine and therapeutic protein formulation. A simple quantitative NMR method to measure both PS80 and histidine in human papillomavirus (HPV) virus-like particle (VLP) vaccine for aqueous and alum-containing samples is described. The new NMR method is compared to current colorimetric methods for PS80 and RP HPLC for histidine. The new NMR method is comparable to current assays with an advantage of a simpler sample treatment for PS80. The efficiency is also increased because one method can now provide two assay results instead of two separate methods. Furthermore, the NMR method can detect PS80 stability due to hydrolysis and oxidation when PS80 is stored in a stainless steel container by observing a change of its NMR line shape profile.

Differential Surface Adsorption Phenomena for Conventional and Novel Surfactants Correlates with Changes in Interfacial mAb Stabilization.

Protein adsorption on surfaces can result in loss of drug product stability and efficacy during the production, storage, and administration of protein-based therapeutics. Surface-active agents (excipients) are typically added in protein formulations to prevent undesired interactions of proteins on surfaces and protein particle formation/aggregation in solution. The objective of this work is to understand the molecular-level competitive adsorption mechanism between the monoclonal antibody (mAb) and a commercially used excipient, polysorbate 80 (PS80), and a novel excipient, N-myristoyl phenylalanine-N-polyetheramine diamide (FM1000). The relative rate of adsorption of PS80 and FM1000 was studied by pendant bubble tensiometry. We find that FM1000 saturates the interface faster than PS80. Additionally, the surface-adsorbed amounts from X-ray reflectivity (XRR) measurements show that FM1000 blocks a larger percentage of interfacial area than PS80, indicating that a lower bulk FM1000 surface concentration is sufficient to prevent protein adsorption onto the air/water interface. XRR models reveal that with an increase in mAb concentration (0.5-2.5 mg/mL: IV based formulations), an increased amount of PS80 concentration (below critical micelle concentration, CMC) is required, whereas a fixed value of FM1000 concentration (above its relatively lower CMC) is sufficient to inhibit mAb adsorption, preventing mAb from co-existing with surfactants on the surface layer. With this observation, we show that the CMC of the surfactant is not the critical factor to indicate its ability to inhibit protein adsorption, especially for chemically different surfactants, PS80 and FM1000. Additionally, interface-induced aggregation studies indicate that at minimum surfactant concentration levels in protein formulations, fewer protein particles form in the presence of FM1000. Our results provide a mechanistic link between the adsorption of mAbs at the air/water interface and the aggregation induced by agitation in the presence of surfactants.

Lack of an Effect of Polysorbate 80 on Intestinal Drug Permeability in Humans.

PURPOSE: Despite no broad, direct evidence in humans, there is a potential concern that surfactants alter active or passive drug intestinal permeation to modulate oral drug absorption. The purpose of this study was to investigate the impact of the surfactant polysorbate 80 on active and passive intestinal drug absorption in humans. METHODS: The human (n = 12) pharmacokinetics (PK) of three probe substrates of intestinal absorption, valacyclovir, chenodeoxycholic acid (CDCA), and enalaprilat, were assessed. Endogenous bile acid levels were assessed as a secondary measure of transporter and microbiota impact. RESULTS: Polysorbate 80 did not inhibit peptide transporter 1 (PepT1)- or apical sodium bile acid transporter (ASBT)-mediated PK of valacyclovir and CDCA, respectively. Polysorbate 80 did not increase enalaprilat absorption. Modest increases in unconjugated secondary bile acid Cmax ratios suggest a potential alteration of the in vivo intestinal microbiota by polysorbate 80. CONCLUSIONS: Polysorbate 80 did not alter intestinal membrane fluidity or cause intestinal membrane disruption. This finding supports regulatory relief of excipient restrictions for Biopharmaceutics Classification System-based biowaivers.

Threshold for Anaphylactoid Reaction to Polysorbate 80 in Canines.

Polysorbate 80 (PS80) functions as a dispersing agent or solubilizer in many pharmaceuticals, and as a stabilizer in biopharmaceuticals. Topical or parenteral administration of low doses of PS80 in biopharmaceuticals has been associated with mild allergic reactions, including local injection site reactions in humans. High doses of PS80, such as levels found in traditional Chinese herbal parenteral medicines, have been linked to systemic effects consistent with anaphylactoid-type reactions, which are characterized by the direct release of histamine from mast cells (degranulation). Nonclinical safety assessments of PS80 in vivo have mainly focused on canine model systems, a species established to be particularly sensitive to PS80. However, there is conflicting data about the dose and route of administration of PS80 required to elicit an anaphylactoid-type reaction in this model system. Therefore, studies using multiple dosing regimens in anesthetized and conscious dogs including a combination of cardiovascular data, clinical signs, and biomarkers of mast cell degranulation were conducted. An intravenous (IV) bolus of 1 mg/kg PS80 (0.25% w/v) elicited a positive anaphylactoid reaction including increased heart rate, hypotension, and clinical signs associated with anaphylactoid reactions (e.g., reddened muzzle). However, a full reaction was not observed with a subcutaneous (SC) injection of PS80 (0.25% w/v) up to 20 mg/kg and IV bolus or IV infusions up to 0.5 mg/kg. These data establish a threshold dose for eliciting an anaphylactoid reaction in canine which varies depending on the route of administration as well as the rate of PS80 infusion.

Polysorbate 80-Induced Anaphylactoid Reaction and the Effects on Cardiovascular Function: Dose Threshold and Species Comparison.

Polysorbate 80 (PS80) is commonly used in pre-clinical formulations. The dose threshold for cardiovascular (CV) changes and hypersensitivity reaction in the dog was assessed and compared to other species. PS80 was administered by intravenous (IV) bolus (.5, 1 mg/kg), IV infusion (.3, .5, 1, 3 mg/kg), subcutaneous (SC) injection (5, 10, 15 mg/kg) and oral gavage (10 mg/kg) to dogs with CV monitoring. Monkeys and minipigs received PS80 by IV infusion at 3 mg/kg. Plasma histamine concentration was measured following PS80 IV infusion and with diphenhydramine pre-treatment in dogs only. In dogs, PS80 was not associated with CV changes at doses up to 15 mg/kg SC and 10 mg/kg oral, but decreased blood pressure and increased heart rate with IV bolus at ≥ .5 mg/kg and IV infusion at ≥ 1.0 mg/kg and decreased body temperature with IV infusion at 3 mg/kg was observed. Transient edema and erythema were noted with all administration routes, in all three species including doses that were devoid of CV effects. In monkeys and minipigs, PS80 did not induce CV, cutaneous or histamine concentration changes. These results suggest that mild, transient skin changes occur following PS80 administration at doses that are not associated with CV effects in the dogs. In dogs, the cardiovascular effect threshold was <.5 mg/kg for IV bolus, .3 mg/kg for IV infusion, 15 mg/kg for SC injection, and 10 mg/kg for oral administration. Monkey and minipig were refractory to PS80-induced histamine release at 3 mg/kg by IV infusion over 15 minutes.

A Unique Enhancement of Propionibacterium freudenreichii's Ability to Remove Pb(II) from Aqueous Solution by Tween 80 Treatment.

Microbial agents have promise for the bioremediation of Pb(II)-polluted environments and wastewater, the biodecontamination of foods, and the alleviation of toxicity in living organisms. The dairy bacterium Propionibacterium freudenreichii is poorly able to remove Pb(II) from aqueous solution at 25 ppm, ranging from 0 to 10% of initial concentration. Here, we report on an original strong enhancement of this activity (ranging from 75% to 93%, p < 0.01) following the addition of a polysorbate detergent (Tween® 80) during or either shortly after the growth of a P. freudenreichii culture. We evaluated the optimal Tween® 80 concentration for pretreatment conditions, documented the role of other detergents, and explored the possible mechanisms involved. Our results reveal a novel, environmentally friendly, low-cost pretreatment procedure for enhancing the selective removal of lead from water by probiotic-documented bacteria.

Deproteinization of Chitin Extracted with the Help of Ionic Liquids.

The isolation of chitin utilizing ionic liquid 1-ethyl-3-methylimidazolium acetate has been determined to result in polymer contaminated with proteins. For the first time, the proteins in chitin extracted with ionic liquid have been quantified; the protein content was found to vary from 1.3 to 1.9% of the total weight. These proteins were identified and include allergenic proteins such as tropomyosin. In order to avoid 'traditional' hydroxide-based deproteinization of chitin, which could reduce the molecular weight of the final product, alternative deproteinization strategies were attempted. Testing of the previously reported deproteinization method using aqueous K3PO4 resulted in protein reduction by factors varying from 2 to 10, but resulted in significant phosphate salt contamination of the final product. Contrarily, the incorporation of GRAS (Generally Recognized as Safe) compound Polysorbate 80 into the polymer washing step provided the polymer of comparable purity with no contaminants. This study presents new options for the deproteinization of chitin that can replace traditional approaches with methods that are environmentally friendly and can produce high purity polymer.

Bio-Herbicidal Potential of Nanoemulsions with Peppermint Oil on Barnyard Grass and Maize.

Bio-based nanoemulsions are part of green pest management for sustainable agriculture. This study assessed the physicochemical properties and the herbicidal activities of the peppermint essential oil nanoemulsions (PNs) in concentrations 1.0-10% stabilized by Eco-Polysorbate 80 on germinating seeds and young plants of maize and barnyard grass. Based on the design of experiment (DOE) results, the final nanoemulsion formulations were obtained with 1, 1.5, 2, and 5% of essential oil concentration. Biological analyses were conducted to select the most promising sample for selective control of barnyard grass in maize. Seedlings growing in the presence of PNs displayed an overall inhibition of metabolism, as expressed by the calorimetric analyses, which could result from significant differences in both content and composition of carbohydrates. Concentration-response sub estimation showed that leaf-sprayed concentration of PN causing 10% of maize damage is equal to 2.2%, whereas doses causing 50% and 90% of barnyard grass damage are 1.1% and 1.7%, respectively. Plants sprayed with PN at 5% or 10% concentration caused significant drops in relative water content in leaves and Chlorophyll a fluorescence 72 h after spraying. In summary, peppermint nanoemulsion with Eco-Polysorbate 80 at 2% concentration is a perspective preparation for selective control of barnyard grass in maize. It should be analyzed further in controlled and field conditions.