Uneven impacts of COVID-19 on residents' utilization of urban parks: A case study of Guangzhou, China.

As COVID-19 increased people's dependency on urban parks for physical and psychological well-being, it also has uncertain impacts on park utilization. Understanding these impacts and how the pandemic has contributed to them is an issue that warrants urgent attention. We used multi-source spatio-temporal data to examine urban park use before and during COVID-19 in Guangzhou, China, and constructed a set of regression models to evaluate the associated factors. We found that COVID-19 has significantly reduced the overall utilization of urban parks while also exacerbating spatial unevenness. This was due to residents' limited movement distance, and the diminished role of urban transportation affecting the efficient citywide use of parks. Meanwhile, residents' increased demand for nearby parks amplified the importance of community parks, which exacerbated the consequences caused by the uneven distribution of park resources. We propose that city administrators improve the efficiency of existing parks and prioritize the adequate placement of community parks at urban fringes to improve access. Furthermore, cities with similar layouts as Guangzhou should plan for urban parks from a multi-perspective and consider the sub-city level differences to address unevenness during the current pandemic and in the future.

The Concept of Evenness/Unevenness: Less Evenness or More Unevenness?

While evenness is understood to be maximal if all types (species, genotypes, alleles, etc.) are represented equally (via abundance, biomass, area, etc.), its opposite, maximal unevenness, either remains conceptually in the dark or is conceived as the type distribution that minimizes the applied evenness index. The latter approach, however, frequently leads to conceptual inconsistency due to the fact that the minimizing distribution is not specifiable or is monomorphic. The state of monomorphism, however, is indeterminate in terms of its evenness/unevenness characteristics. Indeed, the semantic indeterminacy also shows up in the observation that monomorphism represents a state of pronounced discontinuity for the established evenness indices. This serious conceptual inconsistency is latent in the widely held idea that evenness is an independent component of diversity. As a consequence, the established evenness indices largely appear as indicators of relative polymorphism rather than as indicators of evenness. In order to arrive at consistent measures of evenness/unevenness, it seems indispensable to determine which states are of maximal unevenness and then to assess the position of a given type distribution between states of maximal evenness and maximal unevenness. Since semantically, unevenness implies inequality among type representations, its maximum is reached if all type representations are equally different. For given number of types, this situation is realized if type representations, when ranked in descending order, show equal differences between adjacent types. We term such distributions "stepladders" as opposed to "plateaus" for uniform distributions. Two approaches to new evenness measures are proposed that reflect different perspectives on the positioning of type distributions between the closest stepladders and the closest plateaus. Their two extremes indicate states of complete evenness and complete unevenness, and the midpoint is postulated to represent the turning point between prevailing evenness and prevailing unevenness. The measures are graphically illustrated by evenness surfaces plotted above frequency simplices for three types, and by transects through evenness surfaces for more types. The approach can be generalized to include variable differences between types (as required in analyses of functional evenness) by simply replacing types with pairs of different types. Pairs, as the new types, can be represented by their abundances, for example, and these can be modified in various ways by the differences between the two types that form the pair. Pair representations thus consist of both the difference between the paired types and their frequency. Omission of pair frequencies leads to conceptual ambiguity. Given this specification of pair representations, their evenness/unevenness can be evaluated using the same indices developed for simple types. Pair evenness then turns out to quantify dispersion evenness.

Investigation of symptoms of hand skin changes with aging in Korean women and development of a new standard grading scale for hand aging.

BACKGROUND: Skin aging, particularly facial skin, has been actively studied. However, hand skin research is limited. METHODS: Aging symptoms of 100 hands of Korean women aged from 20s to 60s were measured by noninvasive and bioengineering methods. Standard grade images were produced. RESULTS: As people got older, skin wrinkles were getting worse and skin tone was uneven with the occurrence of structural flexion. For each symptom, a suitable standard photograph of the skin of the hand was chosen and a new grading scale was made. CONCLUSIONS: The new grading scale developed in the present study could be employed in studies to explore aging of hand skin as one of objective indicators.

'Do UC the melanoma?' Recognising the importance of different lesions displaying unevenness or having a history of change for early melanoma detection.

BACKGROUND/OBJECTIVES: Many melanomas are of a diameter smaller than 6 mm and may lack classical asymmetry, border irregularity and colour variegation (ABCD). The objectives of this article are to characterise the fidelity of melanomas diagnosed in a high-risk clinic to the ABCD and to review potential methods for early clinical detection of melanoma. METHODS: All cases of primary melanoma diagnosed by one clinician at the Memorial Sloan-Kettering Cancer Center over the past 11 years were evaluated for the presence of the ABCD. The melanomas were analysed for asymmetry of contour, unevenness in distribution of colours and textures, border irregularity, number of colours present and diameter. RESULTS: In all, 236 melanomas were analysed. Of these, asymmetry of contour was present in 65% and 94% demonstrated unevenness in the distribution of colours and textures. The borders were regular in 12% of the melanomas and colour variegation was present in 63%. In total, 28% of the lesions were small, with a diameter less than 6 mm. This study was limited by the subjectivity of clinical lesion analysis. CONCLUSION: We put forward for your consideration a new mnemonic: 'Do UC (different, uneven, changing) the melanoma?' This mnemonic encompasses differential, analytical and comparative cognition strategies for an enhanced early detection of melanoma.

Analysis of Gloss Unevenness and Bidirectional Reflectance Distribution Function in Specular Reflection.

Gloss is associated significantly with material appearance, and observers often focus on gloss unevenness. Gloss unevenness is the intensity distribution of reflected light observed within a highlight area, that is, the variability. However, it cannot be analyzed easily because it exists only within the highlight area and varies in appearance across the reflection angles. In recent years, gloss has been analyzed in terms of the intensity of specular reflection and its angular spread, or the bidirectional reflectance distribution function (BRDF). In this study, we develop an apparatus to measure gloss unevenness that can alter the angle with an angular resolution of 0.02°. Additionally, we analyze the gloss unevenness and BRDF in terms of specular reflection. Using a high angular resolution, we measure and analyze high-gloss materials, such as mirrors and plastics, and glossy materials, such as photo-like inkjet paper and coated paper. Our results show that the magnitude of gloss unevenness is the largest at angles marginally off the center of the specular reflection angle. We discuss an approach for physically defining gloss unevenness based on the BRDF.

Prefrontal cortical activity during uneven terrain walking in younger and older adults.

Introduction: Walking in complex environments increases the cognitive demand of locomotor control; however, our understanding of the neural mechanisms contributing to walking on uneven terrain is limited. We used a novel method for altering terrain unevenness on a treadmill to investigate the association between terrain unevenness and cortical activity in the prefrontal cortex, a region known to be involved in various cognitive functions. Methods: Prefrontal cortical activity was measured with functional near infrared spectroscopy while participants walked on a novel custom-made terrain treadmill surface across four different terrains: flat, low, medium, and high levels of unevenness. The assessments were conducted in younger adults, older adults with better mobility function and older adults with worse mobility function. Mobility function was assessed using the Short Physical Performance Battery. The primary hypothesis was that increasing the unevenness of the terrain would result in greater prefrontal cortical activation in all groups. Secondary hypotheses were that heightened prefrontal cortical activation would be observed in the older groups relative to the younger group, and that prefrontal cortical activation would plateau at higher levels of terrain unevenness for the older adults with worse mobility function, as predicted by the Compensation Related Utilization of Neural Circuits Hypothesis. Results: The results revealed a significant main effect of terrain, indicating a significant increase in prefrontal cortical activation with increasing terrain unevenness during walking in all groups. A significant main effect of group revealed that prefrontal cortical activation was higher in older adults with better mobility function compared to younger adults and older adults with worse mobility function in all pooled terrains, but there was no significant difference in prefrontal cortical activation between older adults with worse mobility function and younger adults. Contrary to our hypothesis, the older group with better mobility function displayed a sustained increase in activation but the other groups did not, suggestive of neural compensation. Additional findings were that task-related increases in prefrontal cortical activation during walking were lateralized to the right hemisphere in older adults with better mobility function but were bilateral in older adults with worse mobility function and younger adults. Discussion: These findings support that compared to walking on a flat surface, walking on uneven terrain surfaces increases demand on cognitive control resources as measured by prefrontal cortical activation.

An analogical method for evaluating ring performance based on quality and production parameters.

This study was carried out to determine the best ring size for a certain yarn count. In a ring frame with three separate rings of varying sizes, 20s/1 kW yarn was created. The spinning method used the same ring speed, twist, ring traveller, and spacer but three distinct rings with diameters of 38 mm (Ring- A), 40 mm (Ring- B), and 42 mm (Ring- C). Then, under the same testing conditions, ten samples of each yarn were examined by Uster Evenness Tester (UT-6) and compared to determine the best one. The "Ring- C″ production yield was 0.22% and 1.34% greater than the "Ring- B″ and "Ring- A″ yields, respectively. Yarn breakage for "Ring- C″ was 47.78% and 200% greater than for "Ring- B″ and "Ring- A," respectively. Yarn unevenness for "Ring- C″ was found to be 4.15% and 4.14% higher than "Ring- B″ and "Ring- A," imperfection of yarn produced by "Ring- B″ was 18.54% and 3.47% lower than "Ring- C″ and "Ring- A," and tenacity of yarn produced by "Ring- B″ was 3.35% and 0.64% higher than "Ring- C″ and "Ring- A." "Ring- C″ yarn hairiness was 10.63% and 12.31% higher than "Ring- B″ and "Ring- A″ yarn hairiness, respectively. According to the study of the tested report, yarn generated from "Ring- B″ delivered optimized results in terms of both quality and output. Ring "Ring- B″ had a lower production loss than Ring "A" but a higher loss than Ring "C." Also, the hairiness of yarn made from "Ring- B″ was remarkably similar to yarn made from "Ring- A."

Measurement and Correction of Pointing Error Caused by Radio Telescope Alidade Deformation based on Biaxial Inclination Sensor.

One of the key reasons for the deterioration of antenna pointing accuracy for radio telescopes is the deformation and tilt of antenna alidades, which primarily result from track unevenness and thermal gradients. A high-precision inclinometer measurement system is installed to investigate the tilt of the antenna alidade and the pointing errors caused thermally. An environment control box with a leveling base was designed to reduce the interference of the external environment, which proved to be effective in guaranteeing the zero-point stability and repeat accuracy of the inclinometer. The tilt of the alidade caused by the track unevenness was measured by a test of slowly rotating the antenna along the azimuth at windless nighttime. A 5-day antenna stationary test and a 48 h astronomical pointing error measurement were performed, which proved the inclinometer measurement system is capable of measuring the thermally induced inclinations with acceptable accuracy. Through a preliminary compensation experiment, the pointing error is compensated from 37″ to 12″, which shows that the application of the system has a good effect on improving the pointing accuracy of the antenna. The system with high measurement accuracy, good system stability, and low computational complexity, proves an effective tool for the radio telescope to solve the problem of real-time measurement and compensation for antenna pointing errors.

Numerical and Experimental Studies on the Improvement of Gas Chamber Structure during Gas-Assisted Extrusion.

In the gas-assisted extrusion process, the melt inside the die is in a low-viscosity molten state, so the flow field of the gas cushion layer has a great effect on the cross-sectional shape of the micro-tube. Therefore, this study establishes the gas distribution chamber model of the gas-assisted die. Ansys Fluent software was used to simulate the gas flow field of the gas distribution chamber. The effect of the gas chamber structure on the size of the micro-tube was analyzed by the extrusion experiment. The research shows that the velocity unevenness coefficient of the gas outlet of the single gas chamber die is 11.8%, which is higher than that of the double gas chamber die. The use of a double gas chamber die can improve the stability of the gas cushion layer and the wall thickness non-uniformity of the micro-tube, which verifies the simulation results.

Precipitation projection over Daqing River Basin (North China) considering the evolution of dependence structures.

Understanding dynamic future changes in precipitation can provide prior information for nonpoint source pollution simulations under global warming. However, the evolution of the dependence structure and the unevenness characteristics of precipitation are rarely considered. This study applied a two-stage bias correction to daily precipitation and max/min temperature data in the Daqing River Basin (DQRB) with the HadGEM3-RA climate model. Validated from 1981 to 2015, future scenarios under two emission paths covering 2031-2065 and 2066-2100 were projected to assess variations in both the amount and unevenness of precipitation. The results suggested that, overall, the two-stage bias correction could reproduce the marginal distributions of variables and the evolution process of the dependence structure. In the future, the amount of precipitation in the plains is expected to increase more than that in the mountains, while precipitation unevenness, as measured by relative entropy, shows a slight increase in the mountains and a decrease in the plains, with enhanced seasonality. Conditioned on rising temperatures, high-/low-intensity precipitation tends to intensify/weaken precipitation unevenness. Additionally, the potential application of the bias correction method used herein and the possible impacts of uneven precipitation on nonpoint source pollution are given for further analyses. This study can provide useful information for future nonpoint source pollution simulations in the DQRB.

A road surface image dataset with detailed annotations for driving assistance applications.

The preview of the road surface states is essential for improving the safety and the ride comfort of autonomous vehicles. The created dataset in this data article consists of 370151 road surface images captured under a wide range of road and weather conditions in China. The original pictures are acquired with a vehicle-mounted camera and then the patches containing only the road surface area are cropped. The friction level, material, and unevenness properties of each road image are annotated in detail. This large-scale dataset is useful for developing vision-based road sensing modules to improve the performance of the driving assistance systems. Also, deep-learning experts can regard this dataset as a comparing benchmark for their algorithms. The dataset is available at [1].

Evolution of Shear Surface Morphology of Jointed Rock Masses Based on Gaussian Filtering Method under Freeze-Thaw Cycles.

This study aims to quantify the shear surface morphology of jointed rock and its evolution under shearing, cyclic freezing, and thawing using the Gaussian filtering method. Gaussian filtering method enables the construction of the (large-scale) waviness surface and the (small-scale) unevenness surface of a digitized surface (created by laser scanning). Both waviness and unevenness surfaces are then quantified by roughness coefficient ratio (S) and degradation degrees of the waviness surface (Dw) and unevenness surface (Dr). These (microscopic) morphological parameters (S, Dw and Dr) are subsequently used to explain the development of the (macroscopic) shear strength of the jointed rocks on direct shear tests. The results indicate that compared with fresh jointed rocks, the freezing and thawing causes the potential shear surface asperities to be easier to damage and fail under shear load. Such damage is well represented by the significant decrease in Dw and Dr. On the other hand, with the increase of the freeze-thaw cycle (N), Dw increases while Dr reaches the maximum at an early stage of the cycle, where Dr > Dw. This difference reveals the underlying shear mechanism microscopically; that is, in the initial stage, the shear surface morphology is mainly dominated by the unevenness surface Dr, and then it is controlled by the waviness surface Dw during the freeze-thaw cycle.

Vascular healing after kissing balloon inflation: Nine-month 3D optical coherence tomography analysis in corelab.

Background: The jailing strut configuration with link-free and distal guidewire recrossing (LFD) at the side branch orifice (SBO) reduces incomplete stent apposition (ISA) after kissing balloon technique (KBT) in crossover stenting of coronary bifurcation lesions (CBLs). However, data regarding vascular healing after KBT are lacking. We investigated vascular healing 9 months after crossover stenting followed by KBT with optical coherence tomography (OCT) guidance in a prospective multicenter registry. Methods: Fifty-nine patients with CBLs (LFD, 35 patients; non-LFD, 24 patients) were studied. The jailing configuration of the SB and the wire-recrossing position, incidence of ISA and uncovered struts, and neointima unevenness score (NUS) in the main vessel (MV) after 9 months were determined by off-line 3D-OCT in the core laboratory. Results: The ISA rate was significantly higher at the SB ostium and distal MV after KBT in the non-LFD group, compared to the LFD group. After 9 months, incidence of ISA (18.3 ± 18.2 vs. 6.0 ± 8.7%, p < 0.01) and uncovered struts (8.7 ± 9.9 vs. 4.7 ± 7.3 %, p = 0.08) were higher at the SB ostium with higher SB restenosis in the non-LFD group. In distal MV, NUS was significantly higher (3.1 ± 1.1 vs. 2.5 ± 0.6, p < 0.05). In true-CBLs, an increase in uncovered struts and ISA rate was prominent in the proximal MV and opposite SB. No differences were observed in the 9-month clinical outcomes. Conclusion: Visualization of the wire recrossing point and the SB-jailing strut pattern by OCT plays an important role to optimize the KBT in CBL stenting, resulting in favorable mid-term vascular healing.

Building a richer understanding of diversity through causally consistent evenness measures.

Causally consistent evenness measures can only be changed when the populations they refer to change. This novel property is deeply important for making causal inferences, and yet every prominent evenness measure is not causally consistent. This paper proposes a family of causally consistent evenness measures, and while any evenness measure can be made to be causally consistent, the family I introduce has the added benefit of a straightforward interpretation as a percentage evenness. I go on to illustrate the performance of these measures, and demonstrate the importance of causal consistency not only for causal inference but also for correctly reflecting the evenness of ecological communities. I also present several alternative transformations of my preferred measures, which work to address potential critiques in advance, communicate evenness to nontechnical audiences, and connect my work to more familiar ecological indicators.

Examining the Multi-Scalar Unevenness of High-Quality Healthcare Resources Distribution in China.

Healthcare disparity is, to a large extent, ascribable to the uneven distribution of high-quality healthcare resources, which remains insufficiently examined, largely due to data unavailability. To overcome this barrier, we synthesized multiple sources of data, employed integrated methods and made a comprehensive analysis of government administrative structures and the socio-economic environment to build probably the most inclusive dataset of Chinese 3-A hospitals thus far. Calibrated on a sample of 379 hospitals rated by a reputable organization, we developed a realistic and viable evaluation framework for assessing hospital quality in China. We then calculated performance scores for 1246 3-A hospitals, which were aggregated and further analyzed at multiple scales (cities, provinces, regions, and economic zones) using general entropy indexes. This research shows that the fragmented governance and incoordination of "kuai" and "tiao" is rooted deeply in China's legacy of centrally-planned systems, and has had a far-reaching yet partially contradictory influence over the contemporary distribution and performance of healthcare resources. Additionally, the unevenness in the distribution of healthcare resources is related closely to a city's administrative rank and power. This study thus suggests that the policy design of healthcare systems should be coordinated with external socio-economic transformation in a sustainable manner.

Quantifying evenness and linking it to diversity, beta diversity, and similarity.

An enormous number of measures based on different criteria have been proposed to quantify evenness or unevenness among species relative abundances in an assemblage. However, a unified approach that can encompass most of the widely used indices is still lacking. Here, we first present some basic requirements for an evenness measure. We then propose that unevenness among species relative abundances in an assemblage can be measured by a normalized divergence between the vector of species relative abundances and the mean vector, where the mean vector represents the species relative abundances of a completely even assemblage. Thus, evenness among species relative abundances is measured by the corresponding normalized extent of closeness between these two vectors. We consider five divergence measures, leading to five classes of evenness indices. All our evenness measures are in terms of diversity (Hill number) of order q > 0 (here q controls the weighting of species relative abundances) and species richness (diversity of order q = 0). We propose quantifying evenness through a continuous profile that depicts evenness as a function of diversity order q > 0. The profiles can be easily and visually compared across multiple assemblages. Our evenness indices satisfy all the requirements presented in this paper and encompass many widely used evenness measures as special cases. When there are multiple assemblages, the abundance-based Jaccard- and Sørensen-type dissimilarity measures (which are monotonic functions of beta diversity) can be expressed as weighted averages of the individual species' compositional unevenness values; here, each individual species' compositional unevenness is calculated based on that species' abundances among assemblages. The contribution of a species to each dissimilarity measure can be clearly disentangled and quantified in terms of this single species' compositional unevenness among assemblages. Thus, our framework links the concepts of evenness, diversity, beta diversity, and similarity. Moreover, the framework can be readily extended to a phylogenetic version. A real data example is used to illustrate our approach. We also discuss some criteria and other measures that were previously proposed in the literature.

Power Spectral Density Evaluation of Laser Milled Surfaces.

Ablating surfaces with a pulsed laser system in milling processes often leads to surface changes depending on the milling depth. Especially if a constant surface roughness and evenness is essential to the process, structural degradation may advance until the process fails. The process investigated is the generation of precise thrust by laser ablation. Here, it is essential to predict or rather control the evolution of the surfaces roughness. Laser ablative milling with a short pulse laser system in vacuum (≈1 Pa) were performed over depths of several 10 µm documenting the evolution of surface roughness and unevenness with a white light interference microscope. Power spectral density analysis of the generated surface data reveals a strong influence of the crystalline structure of the solid. Furthermore, it was possible to demonstrate that this effect could be suppressed for gold.

Image analysis of the distribution of turnover rate in the stratum corneum.

BACKGROUND/AIMS: A common method to evaluate turnover rate in the stratum corneum is to measure the change in fluorescence intensity with time after dyeing the stratum corneum with fluorescent pigments. If these changes in fluorescence over time are carefully observed, the rate of decline in fluorescence intensity differs among different small areas on the skin surface. A possible relationship between these differences and dry skin has been reported. The purpose of this research was to develop a method for analyzing turnover rate in the stratum corneum in each small area on the surface of the skin as well as to investigate the variations in the inconsistencies of turnover rate. METHODS: The stratum corneum at six body regions (forehead, cheek, forearm, opisthenar, back and lower leg) was dyed with dansyl chloride (DC), and the change in fluorescence intensity over time was imaged with a highly sensitive television camera through special filters. Then, the fluorescent distribution in the images was analyzed to measure the change in fluorescence intensity with time among the small areas. Also, the decline in fluorescence intensity observed was categorized using specific characteristics into six different types. RESULTS: By attaching a filter to an ultraviolet (UV) light source in order to transmit light at the excitation wavelength and a filter to the camera lens to transmit light at the wavelength of DC fluorescence, we could image the low intensity fluorescent light from the DC without interference from the UV light exciting the DC. The characteristics of the variation in the decline in fluorescence intensity were categorized into six patterns. Type I: pattern showing a uniform decline in fluorescence intensity. Type II: pattern showing sporadic areas where fluorescence intensity declines quickly. Type III: pattern showing relatively large areas where fluorescence intensity declines slowly. Type IV: pattern showing sporadic areas of fluorescence intensity, matched with locations of keratotic plugs. Type V: pattern showing sporadic fluorescent areas, not matched with locations of keratotic plugs. Type VI: pattern showing a partial, drastic decline in fluorescence intensity occurring on inflamed skin after sunburn. CONCLUSIONS: By analyzing the image generated from a highly sensitive television camera equipped with special filters, we could measure turnover rate of the stratum corneum at any small area. The variations in Types IV and V were believed to be derived from keratotic plugs and closed comedo. Except for Type VI, observed on significant skin inflammation, Type II and Type III were believed to be the patterns that reflected variations in turnover rate in stratum corneum itself.

Diferenças intrafirma das competências organizacionais: um estudo de caso

Este trabalho mostra o grau de desenvolvimento das competências organizacionais para inovar em um produtor brasileiro de imunobiológicos, conforme a percepção das pessoas que trabalham em distintas áreas do instituto. Indica que as áreas de produção e qualidade têm a mesma percepção sobre os processos de aquisição de conhecimento individual e a conversão desse em conhecimento organizacional. Verificou-se que as visões das áreas de gestão e desenvolvimento tecnológico são similares, porém mais negativa do que aquela demonstrada pelas finalísticas. As competências relacionadas ao conhecimento não são homogêneas, conforme as pessoas atuantes em distintas áreas. Para as demais competências que articulam a inovação, não há diferença significativa entre as visões das pessoas.