Morphological examination of abdominal vertebral bodies from grass carp using high-resolution micro-CT scans.

The vertebral column, a defining trait of all vertebrates, is organized as a concatenated chain of vertebrae, and therefore its support to the body depends on individual vertebral morphology. Consequently, studying the morphology of the vertebral centrum is of anatomical and clinical importance. Grass carp (GC) is a member of the infraclass Teleostei (teleost fish), which accounts for the majority of all vertebrate species; thus, its vertebral anatomical structure can help us understand vertebrate development and vertebral morphology. In this study, we have investigated the morphology and symmetry of the grass carp vertebral centrum using high-resolution micro-CT scans. To this end, three abdominal vertebrae (V9, V10, & V11) from eight grass carp were micro-CT scanned and then segmented using Dragonfly (ORS Inc.). Grass carp vertebral centrum conformed to the basic teleost pattern and demonstrated an amphicoelous shape (biconcave hourglass). The centrum's cranial endplate was smaller, less circular, and shallower compared to the caudal endplate. While the vertebral centrum demonstrated bilateral symmetry along the sagittal plane (left/right), the centrum focus was shifted dorsally and cranially, breaking dorsoventral and craniocaudal symmetry. The sum of these findings implies that the caudal aspect of grass carp vertebral centrum is bigger and more robust. Currently, we have no information whether this is due to nature, for example, differences in gene expression, or nurture, for example, environmental effect. As the vertebral parapophyses and spinous processes are slanted caudally, the direction of muscle action during swimming may create a gradient of stresses from cranial to caudal, resulting in a more robust caudal aspect of the vertebral centrum. Expanding our study to include additional quadrupedal and bipedal (i.e., human) vertebrae, as well as testing if these morphological aspects of the vertebrae are indeed plastic and can be affected by environmental factors (i.e., temperature or other stressors) may help answer this question.

Long-term effects of local radiotherapy on growth and vertebral features in children with high-risk neuroblastoma.

BACKGROUND: To evaluate the effects of local radiotherapy (RT) on growth, we evaluated the chronological growth profiles and vertebral features of children with high-risk neuroblastoma. METHODS: Thirty-eight children who received local photon or proton beam therapy to the abdomen or retroperitoneum between January 2014 and September 2019 were included. Simple radiography of the thoracolumbar spine was performed before and every year after RT. The height and vertical length of the irradiated vertebral bodies (VBs) compared with the unirradiated VBs (vertebral body ratio, VBR) were analyzed using the linear mixed model. Shape feature analysis was performed to compare the irradiated and unirradiated vertebrae. RESULTS: The follow-up was a median of 53.5 months (range, 21-81 months) after RT. A decline in height z-scores was mainly found in the early phase after treatment. In the linear mixed model with height, the initial height (fixed, p < 0.001), sex (time interaction, p = 0.008), endocrine dysfunction (time interaction, 0.019), and age at diagnosis (fixed and time interaction, both p = 0.002) were significant. Unlike the trend in height, the change in VBR (ΔVBR) decreased gradually (p < 0.001). The ΔVBR in the group that received more than 30 Gy decreased more than in the group that received smaller doses. In the shape feature analysis, the irradiated VBs changed to a more irregular surface that were neither round nor rectangular. CONCLUSION: The irradiated VBs in children were gradually restricted compared to the unirradiated VBs in long-term follow-up, and higher RT doses were significantly affected. Radiation-induced irregular features of VBs were observed.

Bilateral vertebral body tethering: identifying key factors associated with successful outcomes.

PURPOSE: The treatment of operative double major pediatric spinal deformities (e.g., Lenke 3 or 6) with bilateral vertebral body tethering (VBT) can be significantly more challenging when compared to other deformity patterns (e.g., Lenke 1) or treatment with a posterior spinal fusion. We aimed to identify preoperative and perioperative characteristics that were associated with successful postoperative outcomes in patients treated with both a thoracic and thoracolumbar (e.g., bilateral) tether. METHODS: We retrospectively assessed radiographic and clinical data from patients enrolled in a large multi-center study who had a minimum postoperative follow-up of two years. Standard radiographic parameters were extracted from standing spine and left hand-wrist radiographs at various timepoints. We classified patients based on their preoperative deformity pattern (Primary Thoracic [TP] vs. Primary Thoracolumbar [TLP]) and assessed: (1) deformity balance, (2) tilt of the transitional vertebra, and (3) postoperative success. RESULTS: We analyzed data from thirty-six patients (TP: 19 and TLP: 17). We observed no relationship between deformity balance at first erect and postoperative success (p = 0.354). Patients with a horizontal transitional vertebra at first erect were significantly (p = 0.001) more likely to exhibit a successful outcome when compared to those who exhibited a tilted transitional vertebra (83% vs. 62%). Patients who had TLP were also more likely to exhibit a successful outcome when compared to patients who exhibited TP (76% vs. 50%). CONCLUSION: These data indicate that double major deformities can be successfully treated with VBT, particularly for those who exhibit TLP.

Feature-based multimodal registration framework for vertebral pose estimation.

PURPOSE: The reliable estimation of the vertebral body posture helps to aid a safe and effective spine surgery. The proposed work aims to present an MR to X-ray image registration to assess the 3D pose of the vertebral body during spine surgery. The 3D assessment of vertebral pose assists in analyzing the position and orientation of the vertebral body to provide information during various clinical diagnosis conditions such as curvature estimation and pedicle screw insertion surgery. METHODS: The proposed feature-based registration framework extracted vertebral end plates to avoid the mismatch between the intensities of MR and X-ray images. Using the projection matrix, the segmented MRI is forward projected and then registered to the X-ray image using binary image matching similarity and the CMA-ES optimizer. RESULTS: The proposed method estimated the vertebral pose by registering the simulated X-ray onto pre-operative MRI. To evaluate the efficacy of the proposed approach, a certain number of experiments are carried out on the simulated dataset. CONCLUSION: The proposed method is a fast and accurate registration method that can provide 3D information about the vertebral body. This 3D information is useful to improve accuracy during various clinical diagnoses.

Early-term outcome of apical fusion with vertebral body tethering for thoracolumbar curves in adolescent idiopathic scoliosis: a preliminary study.

INTRODUCTION: Vertebral body tethering (VBT) has become an alternative option for select patients with idiopathic scoliosis. However, studies have shown a high number of tether breakages, specifically after thoracolumbar (TL) VBT, that can have a negative impact on the outcome, when the breakage occurs within the first year after surgery. In order to overcome this problem, we have started to apply an apical fusion (AF) in combination with TL VBT for select patients. This study aims to analyze the outcome after AF plus VBT. METHODS: This is a retrospective single surgeon's data analysis. All patients were included who have had TL VBT after January 2022 and a follow-up of 12 months. Patients were grouped based on whether they only had VBT or VBT + AF. RESULTS: Twenty-five patients were analyzed (15 VBT, 10 VBT + AF). Both groups showed a significant curve correction for thoracic and TL curves. Minor loss of correction was observed in both groups. A significant difference was seen regarding early tether breakages, which were found in 60% of VBT patients and 10% of VBT + AF patients. CONCLUSION: The preliminary data shows a significant reduction of early tether breakages when TL VBT is applied in combination with AF.

Changes in the centre of rotation and the anterior bone loss of the vertebral body in Mobi-C artificial disc replacement segments after cervical hybrid surgery: a retrospective study.

OBJECTIVE: To examine the short-term efficacy and imaging results of using the Mobi-C in cervical hybrid surgery on 2-level cervical spondylolisthesis. To observe post-operative changes in the flexion-extension centre of rotation (FE-COR) and anterior bone loss (ABL) of the anterior cervical disc replacement (ACDR) segment. METHODS: Forty-two patients (20 males and 22 females, aged 42‒67 years) who underwent cervical hybrid surgery were retrospectively analysed. Their ACDR segment used Mobi-C, and the fusion segment used ROI-C, with a follow-up of 25‒42 months (31.1 ± 4.8 months). The modified Japanese Orthopaedic Association (mJOA) score, Neck Disability Index (NDI), and visual analogue scale (VAS) were used to assess clinical outcomes. Pre-operative, 6-month post-operative, and final follow-up radiographs were collected to compare total cervical spine curvature (C2-C7), curvature of the operated segments, range of motion (ROM) in the total cervical spine, operated segmental ROM, ACDR segmental ROM, and operated adjacent segmental ROM. The height of the superior articular process (HSAP), the orientation of zygapophyseal joint spaces (OZJS), and the length of the superior articular surface (LSAS) were measured. The FE-COR of the ACDR segment was measured using the mid-plumb line method. The translation distance of the Mobi-C was measured. The degree of disc degeneration in the adjacent segment, bony fusion of the ACDF segment, and ABL of the upper and lower vertebra of the ACDR segment were observed. RESULTS: In our group, all patients have shown improvements in their postoperative mJOA, NDI, and VAS scores. Overall cervical ROM and surgical segmental ROM decreased (P < 0.05). However, there was no significant decrease in ACDR segmental ROM and upper or lower adjacent segmental ROM compared with pre-operatively (P > 0.05). For FE-COR-X, only the last follow-up compared with pre-surgery showed statistical significance (46.74 ± 7.71% vs. 50.74 ± 6.92%, P < 0.05). For FE-COR-Y, the change was statistically significant at both 6 months post-operation and the final follow-up compared to pre-operation (45.37% ± 21.11% vs. 33.82% ± 10.87%, 45. 37% ± 21.11% vs. 27.48% ± 13.58%, P < 0.05). No significant difference in the Mobi-C translation distance was observed (P > 0.05). Moreover, the difference in HSAP was not statistically significant at each node (P > 0.05). The OZJS and LSAS were significantly different at the final follow-up compared to the pre-operative period (P < 0.05). All the ACDF segments were observed in a stable condition at the final follow-up. Furthermore, 9 of the adjacent segments showed imaging ASD (9/82, 10.98%), and all were present at the last follow-up, of which 6 were mild, and 3 were moderate. Twenty of the 42 Mobi-C segments had no significant ABL (grade 0) 6 months post-operatively (47.62%). Sixteen cases (38.10%) showed mild ABL (grade 1), and 6 cases (14.28%) showed moderate ABL (grade 2). No severe ABL occurred. CONCLUSION: The cervical hybrid surgery using Mobi-C artificial cervical discs can achieve satisfactory results. The Mobi-C segmental FE-COR-X shows a slow forward shift trend, and FE-COR-Y drops noticeably within 6 months post-surgery before stabilizing. It's common to see mild to moderate ABL after cervical hybrid surgery using Mobi-C, and significant progression is unlikely in the short term. Furthermore, changes in the FE-COR after hybrid surgery in the Mobi-C segment might not affect clinical outcomes.

Percutaneous transforaminal endoscopic decompression with removal of the posterosuperior region underneath the slipping vertebral body for lumbar spinal stenosis with degenerative lumbar spondylolisthesis: a retrospective study.

BACKGROUND: Percutaneous transforaminal endoscopic decompression (PTED) is an ideal minimally invasive decompression technique for the treatment of lumbar spinal stenosis (LSS) with degenerative lumbar spondylolisthesis (DLS). The posterosuperior region underneath the slipping vertebral body (PRSVB) formed by DLS is an important factor exacerbating LSS in patients. Therefore, the necessity of removing the PRSVB during ventral decompression remains to be discussed. This study aimed to describe the procedure of PTED combined with the removal of the PRSVB and to evaluate the clinical outcomes. METHODS: LSS with DLS was diagnosed in 44 consecutive patients at our institution from January 2019 to July 2021, and they underwent PTED combined with the removal of the PRSVB. All patients were followed up for at least 12 months. The clinical outcomes were evaluated using the visual analog scale (VAS), Oswestry Disability Index (ODI), and modified MacNab criteria. RESULTS: The mean age of the patients was 69.5 ± 7.1 years. The mean preoperative ODI score, VAS score of the low back, and VAS score of the leg were 68.3 ± 10.8, 5.8 ± 1.0, and 7.7 ± 1.1, respectively, which improved to 18.8 ± 5.0, 1.4 ± 0.8, and 1.6 ± 0.7, respectively, at 12 months postoperatively. The proportion of patients presenting "good" and "excellent" ratings according to the modified MacNab criteria was 93.2%. The percent slippage in spondylolisthesis preoperatively (16.0% ± 3.3%) and at the end of follow-up (15.8% ± 3.3%) did not differ significantly (p>0.05). One patient had a dural tear, and one patient had postoperative dysesthesia. CONCLUSIONS: Increasing the removal of PRSVB during the PTED process may be a beneficial surgical procedure for alleviating clinical symptoms in patients with LSS and DLS. However, long-term follow-up is needed to study clinical effects.

Coronal vertical fracture of vertebral body following minimally invasive lateral lumbar interbody fusion: risk factor analysis in consecutive case series.

BACKGROUND: To investigate the incidence and risk factors of coronal vertical vertebral body fracture (CV-VBF) during lateral lumbar interbody fusion (LLIF) for degenerative lumbar disease. METHODS: Clinical data, including age, sex, body mass index, and bone mineral density, were reviewed. Radiological assessments, such as facet joint arthrosis, intervertebral disc motion, index disc height, and cage profiles, were conducted. Posterior instrumentation was performed using either a single or staged procedure after LLIF. Demographic and surgical data were compared between patients with and without VBF. RESULTS: Out of 273 patients (552 levels), 7 (2.6%) experienced CV-VBF. Among the 552 levels, VBF occured in 7 levels (1.3%). All VBF cases developed intraoperatively during LLIF, with no instances caused by cage subsidence during the follow-up period. Sagittal motion in segments adjacent to VBF was smaller than in others (4.6° ± 2.6° versus 6.5° ± 3.9°, P = 0.031). The average grade of facet arthrosis was 2.5 ± 0.7, indicating severe facet arthrosis. All fractures developed due to oblique placement of a trial or cage into the index disc space, leading to a nutcracker effect. These factors were not related to bone quality. CONCLUSIONS: CV-VBF after LLIF occurred in 2.6% of patients, accounting for 1.3% of all LLIF levels. A potential risk factor for VBF involves the nutcracker-impinging effect due to the oblique placement of a cage. Thorough preoperative evaluations and surgical procedures are needed to avoid VBF when considering LLIF in patients with less mobile spine.

A New Look at Vertebral Body Tethering (VBT): Through the Modified Clavien-Dindo-Sink (mCDS) Classification.

INTRODUCTION: Anterior vertebral body tethering (AVBT) is increasingly popular as an option for surgical treatment of idiopathic scoliosis (IS). While the technology remains new, it is important for families and patients to be able to compare it to the current standard of care, posterior spinal fusion (PSF). The purpose of this study is to describe the complication rate of AVBT in IS using the mCDS and to compare it to the recently reported complication rate of PSF in IS. METHODS: A multicenter pediatric spine deformity database was queried for all idiopathic scoliosis patients who underwent vertebral body tethering. There were 171 patients with a minimum 9-month follow-up included in this study. Complications were retrospectively graded by 2 attending pediatric spine surgeons using the mCDS classification system. RESULTS: Data from 171 patients with idiopathic scoliosis was available for analysis, with 156/171 (91%) of patients being female and an average age of 12.2 years old at surgery. There were 156 thoracic tethers (1 with an LIV below L2), 5 lumbar tethers, 9 staged double tethers, and only 1 patient with same-day double tether. Fifty-five (55) (32%) patients experienced a total of 69 complications. The most common complication type for VBT by mCDS was Grade IIIb, encompassing 29/69 (42%) of complications. The second most frequent complication grade was Grade I at 23/69 (33%). Thirty-four (34) out of 69 (49%) of the VBT complications reported required either procedural/surgical intervention or admission to the ICU. CONCLUSIONS: This is the first study to directly compare the complication profile of VBT to PSF using the mCDS. Forty-nine percent (49%) of the VBT complications reported were at least Grade III, while only 7% of complications in the control PSF cohort from the literature were Grade III or higher. The mCDS complication classification brings light to the early learning experience of a new technique compared to the widely accepted standard of PSF for IS. LEVEL OF EVIDENCE: III - Retrospective comparative study.

Incidence of Tether Breakage in Anterior Vertebral Body Tethering.

BACKGROUND: Thoracic anterior vertebral body tethering (TAVBT) is an emerging treatment for adolescent idiopathic scoliosis. Tether breakage is a known complication of TAVBT with incompletely known incidence. We aim to define the incidence of tether breakage in patients with adolescent idiopathic scoliosis who undergo TAVBT. The incidence of tether breakage in TAVBT is hypothesized to be high and increase with time postoperatively. METHODS: All patients with right-sided, thoracic curves who underwent TAVBT with at least 2 and up to 3 years of radiographic follow-up were included. Tether breakage between 2 vertebrae was defined a priori as any increase in adjacent screw angle >5 degrees from the minimum over the follow-up period. The presence and timing of tether breakage were noted for each patient. A Kaplan-Meier survival analysis was performed to calculate expected tether breakage up to 36 months. χ 2 analysis was performed to examine the relationship between tether breakage and reoperations. Independent t test was used to compare the average final Cobb angle between cohorts. RESULTS: In total, 208 patients from 10 centers were included in our review. Radiographically identified tether breakage occurred in 75 patients (36%). The initial break occurred at or beyond 24 months in 66 patients (88%). Kaplan-Meier survival analysis estimated the cumulative rate of expected tether breakage to be 19% at 24 months, increasing to 50% at 36 months. Twenty-one patients (28%) with a radiographically identified tether breakage went on to require reoperation, with 9 patients (12%) requiring conversion to posterior spinal fusion. Patients with a radiographically identified tether breakage went on to require conversion to posterior spinal fusion more often than those patients without identified tether breakage (12% vs. 2%; P =0.004). The average major coronal curve angle at final follow-up was significantly larger for patients with radiographically identified tether breakage than for those without tether breakage (31 deg±12 deg vs. 26 deg±12 deg; P =0.002). CONCLUSIONS: The incidence of tether breakage in TAVBT is high, and it is expected to occur in 50% of patients by 36 months postoperatively. LEVEL OF EVIDENCE: Level IV.

Is restoration of vertebral body height after vertebral body fractures and minimally-invasive dorsal stabilization with polyaxial pedicle screws just an illusion?

INTRODUCTION: Thoracolumbar spine fractures often require surgical treatment as they are associated with spinal instability. Optimal operative techniques and treatment are discussed controversially. Aim of our prospective cohort study was to investigate the sagittal alignment after reduction, the secondary loss of reduction and the subjective outcome as well as the causal correlation of these parameters after minimally invasive stabilization of thoracic and lumbar fractures with polyaxial pedicle screws. MATERIALS AND METHODS: In a single-center study, a total of 78 patients with an average age of 61 ± 17 years who suffered a fracture of the thoracic or lumbar spine were included and subjected to a clinical and radiological follow-up examination after 8.5 ± 8 months. The kyphotic deformity was measured by determining the vertebral body angle, the mono- and bi-segmental wedge angle at three time points. The patients' subjective outcome was evaluated by the VAS spine score. RESULTS: After surgical therapy, a significant reduction of the traumatic kyphotic deformity was shown with an improvement of all angles (vertebral body angle: 3.2° ± 4.4°, mono- and bi-segmental wedge angle: 3.1° ± 5.6°, 2.0° ± 6.3°). After follow-up, a significant loss of sagittal alignment was observed for all measured parameters with a loss of correction. However, no correlation between the loss of reduction and the subjective outcome regarding the VAS spine scale could be detected. CONCLUSION: The minimally invasive dorsal stabilization of thoracic and lumbar spine fractures with polyaxial pedicle screws achieved a satisfactory reduction of the fracture-induced kyphotic deformity immediately postoperatively with a floss of reduction in the further course. However, maybe the main goal of this surgical procedure should be the prevention of a complete collapse of the vertebral body instead of a long-lasting restoration of anatomic sagittal alignment. LEVEL OF EVIDENCE: II.

[Clinical outcomes of 3D-printing stand-alone artificial vertebral body in anterior cervical surgeries].

OBJECTIVE: To explore the short-term outcomes of 3D-printing stand-alone artificial vertebral body (AVB) in the surgical procedure of anterior cervical corpectomy and fusion (ACCF). METHODS: Following the proposal of IDEAL (idea, development, exploration, assessment, and long-term follow-up) framework, we designed and conducted this single-armed, retrospective cohort study. The patients with cervical spondylotic myelopathy were recruited, and these patients exclusively received the surgical procedure of single-level ACCF in our single center. After the process of corpectomy, the size was tailored using different trials and the most suitable stand-alone AVB was then implanted. This AVB was manufactured by the fashion of 3D-printing. Two pairs of screws were inserted in an inclined way into the adjacent vertebral bodies, to stabilize the AVB. The participants were regularly followed-up after the operation. Their clinical data were thoroughly reviewed. We assessed the neurological status according to Japanese Orthopedic Association (JOA) scale. We determined the fusion based on imaging examination six months after the operation. The recorded clinical data were analyzed using specific software and they presented in suitable styles. Paired t test was employed in comparison analysis. RESULTS: In total, there were eleven patients being recruited eventually. The patients were all followed up over six months after the operation. The mean age of the cohort was (57.2±10.2) years. The mean operation time was (76.1±23.1) min and the median bleeding volume was 150 (100, 200) mL. The postoperative course was uneventful for all the cases. Dysphagia, emergent hematoma, and deterioration of neurological function did not occur. Mean JOA scores were 13.2±2.2 before the operation and 16.3±0.8 at the final follow-up, which were significantly different (P < 0.001). The mean recovery rate of neurological function was 85.9%. By comparing the imaging examinations postoperatively and six months after the operation, we found that the average subsidence length was (1.2±1.1) mm, and that there was only one cases (9.1%) of the severe subsidence (>3 mm). We observed significant improvement of cervical lordosis after the operation (P=0.013). All the cases obtained solid fusion. CONCLUSION: 3D-printing stand-alone AVB presented favorable short-term outcome in one-level ACCF in this study. The fusion rate of this zero-profile prosthesis was satisfactory and the complication rate was relatively low.

[Clinical observation on the treatment of ossification of the posterior longitudinal ligament of the cervical spine using 3D printed self-stable zero-profile artificial vertebral body].

Objective: To observe the clinical efficacy of a 3D printed self-stable zero-profile artificial vertebral body for anterior cervical corpectomy decompression and fusion in the treatment of ossification of the posterior longitudinal ligament (OPLL) of the cervical spine. Methods: In this prospective randomized controlled trial, patients diagnosed with OPLL in Luohe Central Hospital from January to July 2022 were divided into a zero-profile group (3D printed self-stable zero-profile artificial vertebral body was used for internal fixation and fusion after anterior cervical subtotal decompression,) and titanium-mesh group (titanium-mesh and titanium plate were used for internal fixation and fusion after anterior cervical subtotal decompression) according to envelope random method. Operation time, intraoperative blood loss, Japanese Orthopaedic Association (JOA) score and improvement rate, incidence of postoperative prosthesis subsidence, and bone graft fusion were recorded and compared between the two groups. Results: Finally, 21 patients in the zero notch group and 20 patients in the titanium mesh group were included in the study and were followed-up. In the zero-profile group, there were 16 males and 5 females, aged (48.0±12.7) years. In the titanium-mesh group, there were 14 males and 6 females, aged (49.8±10.2) years. All the 41 patients successfully completed the operation. In the zero-profile group, the surgical time was (50.04±8.45) minutes, the blood loss was (95.38±26.07) ml and the hospitalization cost was (42.32±6.12) thousand yuan. In the titanium-mesh group, the surgical time was (59.20±11.95) minutes, the blood loss was (93.10±27.86) ml and the hospitalization cost was (42.10±6.71) thousand yuan. The surgical time in the zero-profile group was shorter than that in the titanium-mesh group (P=0.007), and there was no statistically significant difference in blood loss and hospitalization costs between the two groups (both P>0.05). The 41 patients were followed-up for (14.29±1.45) months. Four cases (20.0%) in the titanium mesh group experienced swallowing difficulties and 0 cases in the zero incision group, the difference between the two groups was statistically significant (P=0.048). No intraoperative hematoma, spinal cord nerve recompression, airway crisis, incision infection complications, and no steel plate or screw breakage or displacement occurred after surgery. At the last follow-up, all cases had bone fusion. At the follow-up of 12 months after surgery, the JOA score of the zero incision group increased from preoperative (10.33±1.71) points to (15.47±0.81) points, with an improvement rate of 76.1%±15.7%; the JOA score of the titanium mesh group increased from (10.30±1.75) points to (15.30±0.92) points, with an improvement rate of 73.2%±16.7%; there was no statistically significant difference in improvement rate between the two groups (P=0.580). At the follow-up of 12 months after surgery, 1 case (4.8%) in the zero incision group and 8 cases (40.0%) in the titanium mesh group experienced implant sinking, and the difference between the two groups was statistically significant (P=0.009). Conclusion: Compared with titanium-mesh, 3D printed self-stable zero-profile artificial vertebral body for the treatment of OPLL of the cervical spine can achieve good surgical efficacy, shorter surgical time, lower incidence of postoperative chronic swallowing discomfort, and can provide a better bone material bonding interface and be less prone to prosthesis settlement.

Performance of a deep convolutional neural network for MRI-based vertebral body measurements and insufficiency fracture detection.

OBJECTIVES: The aim is to validate the performance of a deep convolutional neural network (DCNN) for vertebral body measurements and insufficiency fracture detection on lumbar spine MRI. METHODS: This retrospective analysis included 1000 vertebral bodies in 200 patients (age 75.2 ± 9.8 years) who underwent lumbar spine MRI at multiple institutions. 160/200 patients had ≥ one vertebral body insufficiency fracture, 40/200 had no fracture. The performance of the DCNN and that of two fellowship-trained musculoskeletal radiologists in vertebral body measurements (anterior/posterior height, extent of endplate concavity, vertebral angle) and evaluation for insufficiency fractures were compared. Statistics included (a) interobserver reliability metrics using intraclass correlation coefficient (ICC), kappa statistics, and Bland-Altman analysis, and (b) diagnostic performance metrics (sensitivity, specificity, accuracy). A statistically significant difference was accepted if the 95% confidence intervals did not overlap. RESULTS: The inter-reader agreement between radiologists and the DCNN was excellent for vertebral body measurements, with ICC values of > 0.94 for anterior and posterior vertebral height and vertebral angle, and good to excellent for superior and inferior endplate concavity with ICC values of 0.79-0.85. The performance of the DCNN in fracture detection yielded a sensitivity of 0.941 (0.903-0.968), specificity of 0.969 (0.954-0.980), and accuracy of 0.962 (0.948-0.973). The diagnostic performance of the DCNN was independent of the radiological institution (accuracy 0.964 vs. 0.960), type of MRI scanner (accuracy 0.957 vs. 0.964), and magnetic field strength (accuracy 0.966 vs. 0.957). CONCLUSIONS: A DCNN can achieve high diagnostic performance in vertebral body measurements and insufficiency fracture detection on heterogeneous lumbar spine MRI. KEY POINTS: • A DCNN has the potential for high diagnostic performance in measuring vertebral bodies and detecting insufficiency fractures of the lumbar spine.

Vertebral Body Bone Ablation with and without a Saline-Infused System in a Porcine Model.

The purpose of this study was to evaluate the effect of bone radiofrequency (RF) ablation in the spine with and without controlled saline infusion. RF ablation with and without controlled saline infusion was performed in the vertebral bodies of 2 swine with real-time temperature and impedance recordings. Histology and magnetic resonance (MR) imaging results were reviewed to evaluate the ablation zone size, breach of spinal canal, and damage to the spinal cord and nerves. There was no difference in maximum and mean temperatures between controlled saline and noninfusion groups. The impedance and power output were not significantly different between the groups. MR imaging and histopathology demonstrated ablation zones confined within the vertebral bodies. Ablation zone size correlated on MR imaging and histopathology by groups. No ablation effect, breach of posterior cortex, spinal cord injury, or nerve or ganglion injury was observed at any level using MR imaging or histology. Controlled saline infusion does not appear to impact bone RF ablation and, specifically, does not increase the ablation zone size.

Quantitative Study of Vertebral Body and Paravertebral Muscle Degeneration Based on Dual-Energy Computed Tomography: Correlation With Bone Mineral Density.

OBJECTIVES: This study aimed to quantify the degeneration of the vertebral body and paravertebral muscles using dual-energy computed tomography (DECT) and study its relationship with osteoporosis. METHODS: A total of 130 patients with chronic low back pain were included in this study, and DECT scanning of the lumbar region was undertaken prospectively. By placing a standard quantitative computed tomography corrected phantom under the waist during the DECT procedure, bone mineral density (BMD) and the following quantitative parameters were obtained: calcium density (CaD), vertebral fat fraction (VFF), psoas major area, psoas major fat fraction, erector spinalis area, and erector spinalis fat fraction (ESFF). Independent sample t test and 1-way analysis of variance were used between different age-BMD groups. Pearson test was applied to determine correlations for all measurements, and a mathematical model of BMD was established through regression analysis. RESULTS: Calcium density, VFF, psoas major area, psoas major fat fraction, erector spinalis area, and ESFF were significantly different among the age-BMD groups (P < 0.05), and BMD was significantly correlated with these parameters (P < 0.05). Calcium density, VFF, and ESFF were included in the BMD regression equation: BMD = 69.062 + 11.637 × CaD - 1.018 × VFF - 0.726 × ESFF (R2 = 0.860, F = 125.979, P < 0.001). CONCLUSIONS: Degeneration of the vertebral body and paravertebral muscles can be quantitatively analyzed using DECT, and CaD, VFF, and ESFF were independent influencing factors of BMD.

Biomimetic Inspired Hydrogels for Regenerative Vertebral Body Stenting.

PURPOSE OF REVIEW: This review aims to explore the potential of biomimetic hydrogels as an alternative to bone cement in vertebral body stenting (VBS), a minimally invasive treatment for vertebral compression fractures. RECENT FINDINGS: The use of bone cement in VBS procedures can lead to complications such as incomplete fracture reduction and cement leakage. Biomimetic hydrogels have gained significant attention as potential biomaterial alternatives for VBS due to their unique properties, including tuneable therapeutic and mechanical properties. Over the past decade, there has been significant advancements in the development of biomimetic hydrogels for bone regeneration, employing a wide range of approaches to enhance the structural and functional properties of hydrogels. Biomimetic hydrogels hold significant promise as safer and reparative alternatives to bone cement for VBS procedures. However, further research and development in this field are necessary to explore the full potential of hydrogel-based systems for vertebral bone repair.

Operative differences for posterior spinal fusion after vertebral body tethering: Are we fusing more levels in the end?

PURPOSE: Little is known about the perioperative characteristics associated with a posterior spinal fusion (PSF) in adolescent idiopathic scoliosis patients previously treated with vertebral body tethering (VBT). We aimed to determine if operative time, estimated blood loss, postoperative length of stay, instrumentation type, and implant density differed in patients that received a PSF (i.e., PSF-Only) or a PSF following a failed VBT (i.e., PSF-VBT). METHODS: We retrospectively assessed matched cohort data (PSF-VBT = 22; PSF-Only = 22) from two multi-center registries. We obtained: (1) operative time, (2) estimated blood loss, (3) postoperative length of stay, (4) instrumentation type, and (5) implant density. Theoretical fusion levels prior to the index procedure were obtained for PSF-VBT and compared to the actual levels fused. RESULTS: We observed no difference in operative time, estimated blood loss, or postoperative length of stay. Instrumentation type was all-screw in PSF-Only and varied in PSF-VBT with nearly 25% of patients exhibiting a hybrid construct. There was no added benefit to removing anterior instrumentation prior to fusion; however, implant density was higher in PSF-Only (1.9 ± 0.2) than when compared to PSF-VBT (1.7 ± 0.3). An additional two levels were fused in 50% of PSF-VBT patients, most of which were added to the distal end of the construct. CONCLUSIONS: We found that operative time, estimated blood loss, and postoperative length of stay were similar in both cohorts; however, the length of the fusion construct in PSF-VBT is likely to be two levels longer when a failed VBT is converted to a PSF.

The use of electronic conductivity devices can effectively reduce radiation exposure in vertebral body tethering.

INTRODUCTION: Vertebral body tethering (VBT) presents new challenges in respect to radiation exposure, as screws cannot be placed free-hand and the lateral positioning of the patients increases scattered radiation. To reduce radiation exposure, we introduced the use of electronic conductivity device (ECD). These are drilling probes send an audio signal when cortical bone is breached. Thus, anterior, bicortical screws can be placed without multiple fluoroscopic controls. ECD has been used for all VBT procedures at our institution starting April 2020. The aim of this study was to test the safety of ECD and its efficacy in radiation reduction in comparison with the current standard, the fluoroscopic guidance. MATERIALS AND METHODS: All patients who underwent VBT between August 2019 and December 2020 were retrospectively reviewed and divided into two groups according to whether ECD had been used or not. The radiation exposure per procedure and per screw was compared among the two groups, overall and separately for thoracic, lumbar and bilateral procedures. The rate of misplaced screws was calculated. RESULTS: Data from 62 patients and 825 screws were obtained (397 with ECD). No screw misplacement was observed. Radiation reduction with ECD reached up to 41%. A significant reduction was observed in the radiation per procedure in bilateral instrumentation (from 9.16 to 5.52 mGy*m2), and in the analysis per screw overall (from 9.16 to 5.52 mGy*m2) and for lumbar curves (from 0.54 to 0.32 mGy*m2). CONCLUSION: ECD can safely and effectively reduce the radiation exposure for VBT procedures.

Can anterior vertebral body tethering provide superior range of motion outcomes compared to posterior spinal fusion in adolescent idiopathic scoliosis? A systematic review.

PURPOSE: Anterior vertebral body tethering (AVBT) was introduced as a fusionless alternative to treating adolescent idiopathic scoliosis (AIS) while preserving range of motion (ROM). This is the first systematic review to compare the ROM outcomes between AVBT and PSF in treating AIS. METHODS: We conducted a comprehensive search on PubMed, EMBASE, MEDLINE, and Cochrane Library. Inclusion criteria were patients with AIS treated with AVBT or PSF or both, and clearly defined ROM outcomes; exclusion criteria were scoliosis other than AIS, biomechanical or cadaveric studies, non-English publications, case reports, conference summaries, unpublished literature, commentaries, and reviews. Primary outcome was ROM. Secondary outcomes included Cobb angle correction, quality of life (QOL), complications, and muscle strength and endurance. RESULTS: Twelve studies were included in this review. We found moderate evidence to support that AVBT results in superior ROM outcomes than PSF while achieving comparable Cobb angle correction with low evidence. The comparison of QOL outcomes between AVBT and PSF remained inconclusive. In addition to the complications noted conventionally in PSF, AVBT could result in over-correction and distal adding-on. We also found very low evidence to support that AIS patients treated with AVBT have superior muscle strength and endurance when compared to those treated with PSF. CONCLUSIONS: AVBT provides better preservation of ROM and muscle strength postoperatively when compared with PSF, while achieving comparable curve correction. Future studies should explore the spinal growth trajectory to determine the window of opportunity for AVBT in AIS.