RESUMO
Recent work has shown that an amorphous drug-polymer salt can be highly stable against crystallization under hot and humid storage conditions (e.g., 40 °C/75% RH) and provide fast release and that these advantages depend on the degree of salt formation. Here, we investigate the salt formation between the basic drug lumefantrine (LMF) and several acidic polymers: poly(acrylic acid) (PAA), hypromellose phthalate (HPMCP), hypromellose acetate succinate (HPMCAS), cellulose acetate phthalate (CAP), Eudragit L100, and Eudragit L100-55. Salt formation was performed by "slurry synthesis" where dry components were mixed at room temperature in the presence of a small quantity of an organic solvent, which was subsequently removed. This method achieved more complete salt formation than the conventional methods of hot-melt extrusion and rotary evaporation. The acidic group density of a polymer was determined by nonaqueous titration in the same solvent used for slurry synthesis; the degree of LMF protonation was determined by X-ray photoelectron spectroscopy. The polymers studied show very different abilities to protonate LMF when compared at a common drug loading, following the order PAA > (HPMCP â¼ CAP â¼ L100 â¼ L100-55) > HPMCAS, but the difference largely disappears when the degree of protonation is plotted against the concentration of the available acidic groups for reaction. This indicates that the extent of salt formation is mainly controlled by the acidic group density and is less sensitive to the polymer architecture. Our results are relevant for selecting the optimal polymer to control the degree of ionization in amorphous solid dispersions.
Assuntos
Polímeros , Polímeros/química , Metilcelulose/química , Metilcelulose/análogos & derivados , Cristalização/métodos , Celulose/química , Celulose/análogos & derivados , Resinas Acrílicas/química , Sais/química , Derivados da Hipromelose/química , SolubilidadeRESUMO
Microparticles as a multicompartment drug delivery system are beneficial for poorly soluble drugs. Mucoadhesive polymers applied in microparticle technology prolong the contact of the drug with the mucosa surface enhancing drug bioavailability and extending drug activity. Sodium alginate (ALG) and hydroxypropyl methylcellulose (hypromellose, HPMC) are polymers of a natural or semi-synthetic origin, respectively. They are characterized by mucoadhesive properties and are applied in microparticle technology. Spray drying is a technology employed in microparticle preparation, consisting of the atomization of liquid in a stream of gas. In this study, the pharmaceutical properties of spray-dried ALG/HPMC microparticles with posaconazole were compared with the properties of physical mixtures of powders with equal qualitative and quantitative compositions. Posaconazole (POS) as a relatively novel antifungal was utilized as a model poorly water-soluble drug, and hard gelatin capsules were applied as a reservoir for designed formulations. A release study in 0.1 M HCl showed significantly prolonged POS release from microparticles compared to a mixture of powders. Such a relationship was not followed in simulated vaginal fluid (SVF). Microparticles were also characterized by stronger mucoadhesive properties, an increased swelling ratio, and prolonged residence time compared to physical mixtures of powders. The obtained results indicated that the pharmaceutical properties of hard gelatin capsules filled with microparticles were significantly different from hard gelatin capsules with mixtures of powders.
Assuntos
Alginatos , Cápsulas , Sistemas de Liberação de Medicamentos , Gelatina , Derivados da Hipromelose , Triazóis , Alginatos/química , Gelatina/química , Derivados da Hipromelose/química , Sistemas de Liberação de Medicamentos/métodos , Triazóis/química , Triazóis/administração & dosagem , Triazóis/farmacocinética , Liberação Controlada de Fármacos , Preparações de Ação Retardada/química , Antifúngicos/administração & dosagem , Antifúngicos/química , Antifúngicos/farmacocinética , MicroesferasRESUMO
Dairy products are highly susceptible to contamination from microorganisms. This study aimed to evaluate the efficacy of hydroxypropyl methylcellulose (HPMC) and propolis film as protective coatings for cheese. For this, microbiological analyses were carried out over the cheese' ripening period, focusing on total mesophilic bacteria, yeasts and moulds, lactic acid bacteria, total coliforms, Escherichia coli, and Enterobacteriaceae. Physicochemical parameters (pH, water activity, colour, phenolic compounds content) were also evaluated. The statistical analysis (conducted using ANOVA and PERMANOVA) showed a significant interaction term between the HPMC film and propolis (factor 1) and storage days (factor 2) with regard to the dependent variables: microbiological and physicochemical parameters. A high level of microbial contamination was identified at the baseline. However, the propolis films were able to reduce the microbial count. Physicochemical parameters also varied with storage time, with no significant differences found for propolis-containing films. Overall, the addition of propolis to the film influenced the cheeses' colour and the quantification of phenolic compounds. Regarding phenolic compounds, their loss was verified during storage, and was more pronounced in films with a higher percentage of propolis. The study also showed that, of the three groups of phenolic compounds (hydroxybenzoic acids, hydroxycinnamic acids, and flavonoids), hydroxycinnamic acids showed the most significant losses. Overall, this study reveals the potential of using HPMC/propolis films as a coating for cheese in terms of microbiological control and the preservation of physicochemical properties.
Assuntos
Queijo , Conservação de Alimentos , Derivados da Hipromelose , Própole , Queijo/microbiologia , Queijo/análise , Própole/química , Derivados da Hipromelose/química , Conservação de Alimentos/métodos , Fenóis/química , Fenóis/análise , Microbiologia de Alimentos , Escherichia coli/efeitos dos fármacosRESUMO
The compound Salvia Recipe has been shown to have a relatively significant curative effect in management of cardiovascular and cerebrovascular diseases. This work aimed to prepare a thermosensitive in situ gel (ISG) delivery system that utilizes Poloxamer 407, Poloxamer 188, and hydroxypropyl methylcellulose for ocular administration of the compound Salvia recipe to treat cardiovascular and cerebrovascular diseases. The central composite design-response surface method was utilized to improve the prescription of the gel. The formulated gel was characterized and assessed in terms of stability, retention time, in vitro release, rheology, ocular irritation, pharmacokinetics studies, and tissue distribution. The gel was a liquid solution at room temperature and became semisolid at physiological temperature, prolonging its stay time in the eye. Pharmacokinetics and tissue distribution experiments indicated that thermosensitive ISG had enhanced targeting of heart and brain tissues. Additionally, it could lower drug toxicity and side effects in the lungs and kidneys. The compound Salvia ophthalmic thermosensitive ISG is a promising drug delivery system for the management of cardiovascular and cerebrovascular illnesses.
Assuntos
Administração Oftálmica , Sistemas de Liberação de Medicamentos , Géis , Salvia , Animais , Salvia/química , Sistemas de Liberação de Medicamentos/métodos , Distribuição Tecidual , Temperatura , Poloxâmero/química , Coelhos , Olho/efeitos dos fármacos , Olho/metabolismo , Química Farmacêutica/métodos , Derivados da Hipromelose/química , Masculino , Reologia , Medicamentos de Ervas Chinesas/administração & dosagem , Medicamentos de Ervas Chinesas/química , Medicamentos de Ervas Chinesas/farmacocinéticaRESUMO
Oral dispersible films have received broad interest due to fast drug absorption and no first-path metabolism, leading to high bioavailability and better patient compliance. Saxagliptin (SXG) is an antidiabetic drug that undergoes first-path metabolism, resulting in a less active metabolite, so the development of SXG oral dispersible films (SXG-ODFs) improves SXG bioavailability. The formula optimisation included a response surface experimental design and the impact of three formulation factors, the type and concentration of polymer and plasticiser concentration on in-vitro disintegration time and folding endurance. Two optimised SXG-ODFs prepared using either polyvinyl alcohol (PVA) or hydroxypropyl methylcellulose were investigated. SXG-ODFs prepared with PVA demonstrated a superior rapid disintegration time, ranging from 17 to 890 s, with the fastest disintegration time recorded at 17 s. These short durations can be attributed to the hydrophilic nature of PVA, facilitating rapid hydration and disintegration upon contact with saliva. Additionally, PVA-based films displayed remarkable folding endurance, surpassing 200 folds without rupture, indicating flexibility and stability. The high tensile strength of PVA-based films further underscores their robust mechanical properties, with tensile strength values reaching up to 4.53 MPa. SXG exhibits a UV absorption wavelength of around 212 nm, posing challenges for traditional quantitative spectrophotometric analysis, so a polyaniline nanoparticles-based solid-contact screen-printed ion-selective electrode (SP-ISE) was employed for the determination of SXG release profile effectively in comparison to HPLC. SP-ISE showed a better real-time release profile of SXG-ODFs, and the optimised formula showed lower blood glucose levels than commercial tablets.
Assuntos
Adamantano , Compostos de Anilina , Dipeptídeos , Liberação Controlada de Fármacos , Nanopartículas , Álcool de Polivinil , Adamantano/química , Adamantano/análogos & derivados , Dipeptídeos/química , Dipeptídeos/farmacocinética , Dipeptídeos/administração & dosagem , Compostos de Anilina/química , Nanopartículas/química , Administração Oral , Álcool de Polivinil/química , Hipoglicemiantes/química , Hipoglicemiantes/administração & dosagem , Hipoglicemiantes/farmacocinética , Humanos , Derivados da Hipromelose/química , Resistência à Tração , Química Farmacêutica/métodos , Disponibilidade Biológica , Solubilidade , EletrodosRESUMO
PURPOSE: The purpose of the present study was to investigate the dissolution profiles of cocrystals with cis-trans isomeric coformers. Previously, the carbamazepine (CBZ) cocrystals with even-carbon dicarboxylic acids showed higher supersaturation than those with odd-carbon ones, attributed to particle surface solution-mediated phase transformation (PS-SMPT) to CBZ dihydrate (CBZ DH). However, it has been unknown whether this odd-even pattern holds for cis-trans isomeric coformers. METHOD: CBZ cocrystals with maleic acid (MLE) and fumaric acid (FUM) (CBZ-FUM anhydrate (CBZ-FUM AH) and monohydrate (CBZ-FUM H2O)) were employed as model cocrystals. Hydroxypropylãmethylcellulose (HPMC), polyvinylpyrrolidone, and polyethylene glycol 6000 (PEG) were used as precipitation inhibitors. Dissolution tests were performed under a non-sink condition. Residual particles were analyzed by powder X-ray diffraction, differential scanning calorimetry, polarized light microscope, and scanning electron microscope. RESULTS: All cocrystals showed little supersaturation in the absence of a polymer. In 0.1% HPMC, CBZ-FUM AH showed significant supersaturation, whereas CBZ-MLE and CBZ-FUM H2O did not for the first two hours. HPMC reduced the initial dissolution rate of CBZ-MLE and CBZ-FUM H2O while inducing the highest supersaturation among the polymers after 96 h. The particle surface changed from a smooth plane to a striped pattern, but little or no CBZ DH was detected. CONCLUSION: The cocrystals with cis-trans isomeric coformers showed different dissolution profiles. HPMC increased the dissolution rate of CBZ-FUM AH by inhibiting PS-SMPT but reduced the dissolution rate of CBZ-MLE and CBZ-FUM H2O without inducing PS-SMPT. The striped pattern was suggested to be due to surface etching rather than PS-SMPT.
Assuntos
Carbamazepina , Polímeros , Solubilidade , Cristalização , Carbamazepina/química , Difração de Raios X , Derivados da Hipromelose/química , Varredura Diferencial de CalorimetriaRESUMO
PURPOSE: Croscarmellose sodium, generally used as a superdisintegrant in pharmaceutical formulations, is hydrolyzed to form the gel structure under basic pH conditions. Utilizing this property of croscarmellose sodium, we developed a novel sustained release (SR) system. METHODS: Immediate release (IR) and SR tablets containing croscarmellose sodium, alkaline excipients and/or hydroxypropyl methylcellulose (HPMC) were prepared and examined for wet strength and in vitro drug release behavior. In vivo oral drug absorption was evaluated for IR tablets, HPMC tablets and our novel SR tablets in fasted Beagle dogs. RESULTS: To form the gel structure even under the physiological condition, alkaline excipients were added into the formulation containing croscarmellose sodium. Furthermore, HPMC was used to make the gel structure strong enough against mechanical destructive forces. The novel alkalized croscarmellose sodium-HPMC (ACSH) SR tablet, consisting of croscarmellose sodium, alkaline excipients, and HPMC, successfully sustained the release of acetaminophen, ibuprofen, or nicardipine hydrochloride, compared with the IR tablets. The ACSH SR system provided a better release of acetaminophen than the HPMC tablet without croscarmellose sodium in the release study using a small volume of liquid, suggesting that substantial release and subsequent absorption would be expected in the distal intestinal segments after oral dosing. The in vivo oral absorption study revealed that the ACSH SR system successfully suppressed and prolonged the plasma concentrations of acetaminophen. CONCLUSION: This novel ACSH SR system prepared with croscarmellose sodium, alkaline excipients, and HPMC, would be a promising SR formulation for enabling substantial drug absorption in the distal intestinal segments.
Assuntos
Carboximetilcelulose Sódica , Excipientes , Animais , Cães , Derivados da Hipromelose/química , Preparações de Ação Retardada/química , Excipientes/química , Acetaminofen , Química Farmacêutica , Água , Solubilidade , Comprimidos/química , Metilcelulose/químicaRESUMO
Time-domain NMR (TD-NMR) was used for continuous monitoring of the hydration behavior of hydrophilic matrix tablets. The model matrix tablets comprised high molecular weight polyethylene oxide (PEO), hydroxypropyl methylcellulose (HPMC), and polyethylene glycol (PEG). The model tablets were immersed in water. Their T2 relaxation curves were acquired by TD-NMR with solid-echo sequence. A curve-fitting analysis was conducted on the acquired T2 relaxation curves to identify the NMR signals corresponding to the nongelated core remaining in the samples. The amount of nongelated core was estimated from the NMR signal intensity. The estimated values were consistent with the experiment measurement values. Next, the model tablets immersed in water were monitored continuously using TD-NMR. The difference in hydration behaviors of the HPMC and PEO matrix tablets was then characterized fully. The nongelated core of the HPMC matrix tablets disappeared more slowly than that of the PEO matrix tablets. The behavior of HPMC was significantly affected by the PEG content in the tablets. It is suggested that the TD-NMR method has potential to be utilized to evaluate the gel layer properties, upon replacement of the immersion medium: purified (nondeuterated) water is replaced with heavy (deuterated) water. Finally, drug-containing matrix tablets were tested. Diltiazem hydrochloride (a highly water-soluble drug) was employed for this experiment. Reasonable in vitro drug dissolution profiles, which were in accordance with the results from TD-NMR experiments, were observed. We concluded that TD-NMR is a powerful tool to evaluate the hydration properties of hydrophilic matrix tablets.
Assuntos
Polietilenoglicóis , Água , Preparações de Ação Retardada , Polietilenoglicóis/química , Espectroscopia de Ressonância Magnética , Comprimidos , Derivados da Hipromelose/química , Solubilidade , Metilcelulose/químicaRESUMO
Fungal infections are a group of diseases which are challenging to treat because of drug-resistant fungi species, drug toxicity, and often severe patient conditions. Hence, research into new treatments, including new therapeutic substances and novel drug delivery systems, is being performed. Mucoadhesive dosage forms are beneficial to improving drug bioavailability by prolonging the residence time at the site of application. Sodium alginate is a natural polymer with favorable mucoadhesive and gelling properties, although its precipitation in acidic pH significantly disrupts the process of drug release in gastric conditions. Hypromellose is a hydrophilic, semi-synthetic cellulose derivative with mucoadhesive properties, which is widely used as a control release agent in pharmaceutical technology. The aim of this study was to evaluate the impact of hypromellose on alginate microparticles with posaconazole, designed to modify drug release and to improve their mucoadhesive properties for both oral or vaginal application.
Assuntos
Alginatos , Portadores de Fármacos , Feminino , Humanos , Portadores de Fármacos/química , Derivados da Hipromelose/química , Alginatos/química , Sistemas de Liberação de MedicamentosRESUMO
BACKGROUND: Adding resistant starch (RS) to bread formulations is a promising way of increasing fiber content of white bread. However, the partial replacement of wheat flour (WF) by RS can lead to a decrease in technological quality. The objective of this study was to analyze the performance of hydroxypropylmethylcellulose and carboxymethylcellulose as improvers of wheat bread with a high level of replacement (30%) with maize RS. The levels of the modified celluloses were 1% and 1.5% (WF + RS basis), and a formulation without modified celluloses was used as control. Proofing time, loaf volume, crumb characteristics (porosity, texture), and bread staling parameters (hardness increase, moisture loss), among other attributes, were analyzed, and principal component analysis was applied to compare samples. RESULTS: The use of both modified celluloses was effective in improving the quality of breads. Specific volume and crumb porosity were enhanced, particularly at the 1.5% level. Breads with modified celluloses also allowed a higher retention of water and a better preservation of mechanical properties during storage. The principal component analysis projection graph for the first two principal components showed that samples with modified celluloses were clustered by the level of hydrocolloid addition rather than by the type of hydrocolloid used, although all the samples with modified celluloses were close to each other and distant from the control sample without hydrocolloids. CONCLUSION: The quality decrease resulting from the replacement of WF by a high level of RS can be greatly compensated by the use of structuring agents such as hydroxypropylmethylcellulose and carboxymethylcellulose. © 2022 Society of Chemical Industry.
Assuntos
Amido Resistente , Pão , Carboximetilcelulose Sódica/análise , Carboximetilcelulose Sódica/química , Triticum/química , Coloides , Amido/química , Derivados da Hipromelose/químicaRESUMO
The purpose of this study is to develop modified particles with different structures to improve the flowability and compactibility of Liuwei Dihuang (LWDH) powder using co-spray drying technology, and to investigate the preparation mechanism of modified particles and their modified direct compaction (DC) properties. Moreover, tablets with high drug loading contents were also prepared. Particles were designed using polyvinylpyrrolidone (PVP K30) and hydroxypropyl methylcellulose (HPMC E3) as shell materials, and sodium bicarbonate (NaHCO3) and ammonium bicarbonate (NH4HCO3) as pore-forming agents. The porous particles (Ps), core-shell particles (CPs), and porous core-shell particles (PCPs) were prepared by co-spray drying technology. The key DC properties and texture properties of all the particles were measured and compared. The properties of co-spray drying liquid were also determined and analyzed. According to the results, Ps showed the least improvement in DC properties, followed by CPs, and PCPs showed a significant improvement. The modifier, because of its low surface tension, was wrapped in the outer layer to form a shell, and the pore-forming agent was thermally decomposed to produce pores, forming core-shell, porous, and porous core-shell composite structures. The smooth surface of the shell structure enhances fluidity, while the porous structure allows for greater compaction space, thereby improving DC properties during the compaction process.
Assuntos
Povidona , Secagem por Atomização , Derivados da Hipromelose/química , Povidona/química , Medicina Tradicional , Tamanho da PartículaRESUMO
In terms of delivery systems for active compounds, orally disintegrating films are a great option. The initial stage in creating an oral disintegrating film is selecting a film-forming polymer. The basic polymers combination Microcrystalline Cellulose (MCC), which is co-processed with Carboxymethylcellulose Sodium (CMC) and hydroxypropylmethyl cellulose were used to create an oral disintegrating film that contains cholecalciferol (Vitamin D3), a fat-soluble vitamin that aids in the body's absorption of calcium and phosphorus. The goal of the current inquiry was to develop orally disintegrating films of vitamin D3 to improve patient comfort and compliance for pediatric or elderly patients due to its simplicity of administration. Films containing drugs and made of the appropriate plasticizer and chosen polymers demonstrated outstanding film forming and folding endurance. The dissolution test showed that Vitamin D3 has a rapid disintegration property, with the majority of it dissolving in the medium (pH 6.8) in less than two minutes after being inserted. To verify that the films were successfully formed, a variety of procedures including HPLC, FT-IR and microscopic studies were employed. When kept at 40oC with humidity of 75%, the film showed good stability for at least three months.
Assuntos
Colecalciferol , Polímeros , Humanos , Criança , Idoso , Espectroscopia de Infravermelho com Transformada de Fourier , Solubilidade , Polímeros/química , Derivados da Hipromelose/química , Administração OralRESUMO
Flufenamic acid (FFA) is a highly polymorphic drug molecule with nine crystal structures reported in the Cambridge Structural Database. This study explores the use of synchrotron X-ray powder diffraction combined with differential scanning calorimetry to study crystallization and polymorphic phase transitions upon heating FFA-polymer amorphous solid dispersions (ASDs). Ethyl cellulose (EC, 4 cp) and hydroxypropylmethylcellulose (HPMC) grades with different viscosities and substitution patterns were used to prepare dispersions with FFA at 5:1, 2:1, 1:1, and 1:5 w/w drug/polymer ratios by quench cooling. We employed a 6 cp HPMC 2910 material and two HPMC 2208 samples at 4000 and 100â¯000 cp. Hyphenated X-ray diffraction (XRD)-differential scanning calorimetry (DSC) studies show that the 6 and 100â¯000 cp HPMCs and 4 cp EC polymers can stabilize FFA form IV by inhibiting the transition to form I during heating. It appears that the polymers stabilize FFA in both amorphous and metastable forms via a combination of intermolecular interactions and viscosity effects. Increasing the polymer content of the ASD also inhibits polymorphic transitions, with drug/polymer ratios of 1:5 w/w resulting in FFA remaining amorphous during heating. The comparison of FFA ASDs prepared with different samples of HPMCs and ECs suggests that the chemical substitution of the polymer (HPMC 2208 has 19-24% methoxy groups and 4-12% hydroxypropyl groups, while HPMC 2910 has 28-30% methoxy groups and 7-12% hydroxypropyl groups) plays a more significant role in directing polymorphic transitions than the viscosity. A previously unreported polymorph of FFA was also noted during heating but its structure could not be determined.
Assuntos
Ácido Flufenâmico , Polímeros , Varredura Diferencial de Calorimetria , Derivados da Hipromelose/química , Polímeros/química , Solubilidade , Difração de Raios XRESUMO
PURPOSE: Abdominal aortic aneurysm (AAA) rupture is one of the most common causes of mortality in cardiovascular diseases, but currently there is no approved drug for AAA treatment or prevention in the clinic. Naringenin (NGN) has been reported to have anti-AAA effects. However, water solubility and in vivo absorption of NGN are not satisfactory, which leads to its low bioavailability, thus affecting its pharmacological effects. In this project, the improving effects of isonicotinamide (INT) co-crystal and hydroxy propyl methyl cellulose (HPMC) or polyvinyl pyrrolidone (PVP) on the solubility, in vivo absorption, and anti-AAA effects of NGN were evaluated. METHODS: In the current study, co-crystals of naringenin-isonicotinamide (NGN-INT) were prepared, and effects of PVP or HPMC on precipitation rate, supersaturation, and bioavailability of NGN were explored. In addition, with or without HPMC supply, the effects of NGN-INT co-crystal on anti-AAA efficacy of NGN were investigated on an elastase-induced AAA mouse model, and the results were compared with the efficacy of the NGN crude drug. RESULTS: Our results demonstrate that NGN-INT formulation, compared to the NGN crude drug, enhanced the dissolution rate of NGN and significantly increased Cmax and AUC(0-∞) of NGN by 18 times and 1.97 times, respectively. Addition of PVP or HPMC in NGN-INT co-crystal further increased bioavailability of NGN in NGN-INT. The in vivo pharmacodynamic study showed that NGN-INT with HPMC significantly improved the inhibitory effects of NGN against AAA. CONCLUSION: NGN-INT significantly improved the absorption and aortic protective effects of NGN. The supersaturation-prolonging effect of HPMC further enhanced bioavailability and anti-AAA effects of NGN-INT.
Assuntos
Aneurisma da Aorta Abdominal , Camundongos , Animais , Aneurisma da Aorta Abdominal/tratamento farmacológico , Aneurisma da Aorta Abdominal/prevenção & controle , Derivados da Hipromelose/química , Solubilidade , Povidona/químicaRESUMO
An emulsion template method was an effective way to prepare oleogels. However, there were few reports on how hydroxypropyl methylcellulose-pectin (HPMC-PC) mixtures affected the physicochemical properties of the obtained oleogels. In this study, the oleogels were prepared by an emulsion template method. The influences of HPMC and PC concentrations on the formation and physical properties of the emulsions and oleogels were investigated, by analyzing particle size distribution, microstructure, rheological test, oil loss, and crystallinity. The results of particle sizes and microstructure showed that a high concentration of HPMC and PC exhibited a better emulsification performance. The rheological tests indicated that a high concentration of HPMC and PC contributed to an increase in the mechanical strength of emulsions and oleogels. Moreover, an increase in an HPMC and PC concentration was beneficial to reduce the oil loss of oleogels. However, the change of HPMC and PC concentrations had no significant effect on the X-ray diffraction pattern of oleogels. This study could provide a theoretical basis for the construction of polysaccharide-based oleogels.
Assuntos
Compostos Orgânicos , Polissacarídeos , Emulsões/química , Derivados da Hipromelose/química , Compostos Orgânicos/química , Polissacarídeos/químicaRESUMO
Intelligent packaging with indicators that provide information about the quality of food products can inform the consumer regarding food safety and reduce food waste. A solid material for a pH-responsive indicator was developed from hydroxypropyl methylcellulose (HPMC) composited with microcrystalline cellulose (MCC). MCC at 5%, 10%, 20%, and 30% w/w was introduced into the HPMC matrix and the physical, barrier, thermal, and optical properties of the HPMC/MCC bio-composite (HMB) films were analyzed. At 5, 10, and 20% MCC, improved mechanical, transparency, and barrier properties were observed, where HMB with 20% of MCC (H20MB) showed the best performance. Therefore, H20MB was selected as the biodegradable solid material for fabricating Roselle anthocyanins (RA) pH sensing indicators. The performance of the RA-H20MB indicator was evaluated by monitoring its response to ammonia vapor and tracking freshness status of chicken tenderloin. The RA-H20MB showed a clear color change with respect to ammonia exposure and quality change of chicken tenderloin; the color changed from red to magenta, purple and green, respectively. These results indicated that RA-H20MB can be used as a biodegradable pH sensing indicator to determine food quality and freshness.
Assuntos
Hibiscus , Eliminação de Resíduos , Amônia , Animais , Antocianinas/química , Celulose , Galinhas , Alimentos , Embalagem de Alimentos/métodos , Hibiscus/química , Concentração de Íons de Hidrogênio , Derivados da Hipromelose/químicaRESUMO
This study aims to evaluate the feasibility of producing acyclovir-containing modified release matrix tablets by a wet granulation method based on the type and concentration of two pharmaceutical-grade hydrophilic matrix polymers (i.e., hydroxypropyl methylcellulose (HPMC), carbomers, and their combinations) commonly used in biomedical applications. The mechanical properties of the tablets and in vitro and in vivo performance were studied. The physicochemical properties of the raw materials and corresponding physical mixtures were characterized by differential scanning calorimetry, showing that the hydrophilic polymers did not influence the physicochemical properties of the drug. The wet granulation process improved the flow and compression properties of the obtained granules. This method enabled the preparation of the matrix tablets of acyclovir with appropriate mechanical properties concerning hardness and friability. The drug release kinetics was governed by the type and concentration of the hydrophilic polymers composing the matrices. The study has proven that HPMC-composed tablets were superior in modified drug release properties compared to carbomer- and HPMC/carbomer-based tablets. Mathematical analysis of the release profiles, determined in a medium adjusted to pH 1.2 followed by pH 7.4, revealed that the drug released from the hydrophilic tablets followed non-Fickian first-order kinetics. An optimal HPMC-based formulation submitted to accelerated stability studies (40 °C, 75% RH) was stable for three months. A complete cross-over bioavailability study of the selected acyclovir-loaded sustained release tablets and marketed immediate-release tablets were compared in six healthy male volunteers. The extent of drug absorption from the sustained release tablets was significantly greater than that from immediate-release pills, which may improve the drug's antiviral properties attributed to the lower elimination rate and enhanced acyclovir half-life.
Assuntos
Excipientes , Polímeros , Aciclovir , Antivirais , Preparações de Ação Retardada/química , Excipientes/química , Humanos , Derivados da Hipromelose/química , Masculino , Metilcelulose/química , Solubilidade , Comprimidos/químicaRESUMO
This study aims to design and characterize berberine-loaded wafers for the treatment of chemotherapy-induced oral mucositis. Wafers were prepared by lyophilization of hydrogels of various ratios of chitosan (CS)/sodium alginate (SA) as well as CS/hydroxypropyl methylcellulose (HPMC). In vitro release, in vitro mucoadhesion, porosity, and swelling studies were conducted to select the optimized formulations. Moreover, scanning electron microscopy (SEM), X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FTIR), and mechanical properties studies were also performed for further characterization. The efficacy of optimized berberine-loaded wafers in the treatment of oral mucositis was investigated in a 5FU-induced oral mucositis rat model. F2-CS-SA and F6-CS-HPMC wafers exhibited sustained release profile and excellent mucoadhesion strength. Therefore, these wafers were selected as the optimized formulations. SEM confirmed the porous structure of these wafers and is in agreement with the results of porosity and swelling studies. XRD and FTIR studies indicated that berberine was incorporated into the wafer matrix in the amorphous form. In vivo studies demonstrated that topical application of berberine-loaded optimized wafers reduced significantly the severity of 5FU-induced oral mucositis and decreased the expression of inflammatory markers (TNF-α and IL-1ß). The results of in vitro and in vivo studies revealed that berberine-loaded F2-CS-SA and F6-CS-HPMC wafers can be effective in the treatment of chemotherapy-related oral mucositis.
Assuntos
Antineoplásicos , Berberina , Quitosana , Estomatite , Ratos , Animais , Alginatos/química , Quitosana/química , Derivados da Hipromelose/química , Estomatite/induzido quimicamente , Estomatite/tratamento farmacológico , Espectroscopia de Infravermelho com Transformada de Fourier , FluoruracilaRESUMO
Meloxicam (MEL) is an oxicam derivative with low water solubility that is useful in the treatment of colorectal cancer (CRC) as a COX-2 inhibitor. MEL-loaded HPMC micro particles were fabricated using an oil-in-oil (o/o) emulsion solvent evaporation (ESE) method. FTIR, XRD, particle size analysis, DSC, SEM and in vitro dissolution investigation were utilized to evaluate the produced micro particles physiochemically. Finally, rabbits were used as animal models in an in vivo pharmacokinetic study to assess the MEL concentration in the plasma of rabbits. Pure MEL, F1 and F2 were given to rabbits by a single dose for in vivo pharmacokinetic investigations. The XRD and DSC results confirmed the transformation of MEL from its crystalline nature to the amorphous state in micro particles. The formulations F1 and F2 particle sizes were determined 92.43µm and 163.26µm, respectively. The prepared micro particles had a smooth, non-porous and spherical surface. In comparison to the pure drug (22.4%), the F1 and F2 cumulative drug release (%) was 86.19% and 79.57%, respectively. Pure MEL, F1 and F2 have estimated Cmax values of 7.21, 25.41 and 22.38µg/mL, respectively. MEL had a half-life of 19.98 hours, which rose to 22.19 hours and 24.75 hours for F1 and F2, respectively. MEL, F1 and F2 had AUC0-α values of 116.034, 445.95 and 462.72µg/mL*h, respectively. Considering these aspects, MEL-loaded HPMC micro particles may have the potential to better the delivery and control the release of drug that is not easily dissolved in water which could lead to improved therapeutic efficacy and limited side effects.
Assuntos
Inibidores de Ciclo-Oxigenase 2 , Água , Animais , Emulsões , Derivados da Hipromelose/química , Meloxicam , Metilcelulose , Tamanho da Partícula , Coelhos , Solubilidade , SolventesRESUMO
Compression-induced destabilization was investigated in various celecoxib amorphous solid dispersions containing hydroxypropyl methylcellulose (HPMC), poly(vinylpyrrolidone)/vinyl acetate copolymer (PVP/VA), or poly(vinylpyrrolidone) (PVP) at a concentration range of 1-10% w/w. Pharmaceutically relevant (125 MPa pressure with a minimal dwell time) and extreme (500 MPa pressure with a 60 s dwell time) compression conditions were applied to these systems, and the changes in their physical stability were monitored retrospectively (i.e., in the supercooled state) using dynamic differential scanning calorimetry (DSC) and low-frequency Raman (LFR) measurements over a broad temperature range (-90 to 200 and -150 to 140 °C, respectively). Both techniques revealed similar changes in the crystallization behavior between samples, where the application of a higher compression force of 500 MPa resulted in a more pronounced destabilization effect that was progressively mitigated with increasing polymer content. However, other aspects such as more favorable intermolecular interactions did not appear to have any effect on reducing this undesirable effect. Additionally, for the first time, LFR spectroscopy was used as a viable technique to determine the secondary or local glass-transition temperature, Tg,ß, a major indicator of the physical stability of neat amorphous pharmaceutical systems.