Bioemulsifier from sponge-associated bacteria reduces staphylococcal biofilm.

Biofilm formation is a major health concern and studies have been pursued to find compounds able to prevent biofilm establishment and remove pre-existing biofilms. While biosurfactants (BS) have been well-known for possessing antibiofilm activities, bioemulsifiers (BE) are still scarcely explored for this purpose. The present study aimed to evaluate the bioemulsifying properties of cell-free supernatants produced by Bacillaceae and Vibrio strains isolated from marine sponges and investigate their antiadhesive and antibiofilm activities against different pathogenic Gram-positive and Gram-negative bacteria. The BE production by the marine strains was confirmed by the emulsion test, drop-collapsing, oil-displacement, cell hydrophobicity and hemolysis assays. Notably, Bacillus cereus 64BHI1101 displayed remarkable emulsifying activity and the ultrastructure analysis of its BE extract (BE64-1) revealed the presence of structures typically observed in macromolecules composed of polysaccharides and proteins. BE64-1 showed notable antiadhesive and antibiofilm activities against Staphylococcus aureus, with a reduction of adherence of up to 100 % and a dispersion of biofilm of 80 %, without affecting its growth. BE64-1 also showed inhibition of Staphylococcus epidermidis and Escherichia coli biofilm formation and adhesion. Thus, this study provides a starting point for exploring the antiadhesive and antibiofilm activities of BE from sponge-associated bacteria, which could serve as a valuable tool for future research to combat S. aureus biofilms.

The relationship between the secondary structure and the emulsifying ability of protein-based particles and the Pickering emulsions stabilized by the zein-lysine complex.

Due to the sustainability and widespread use of proteins, protein-based materials are extensively utilized in the preparation of Pickering emulsions. However, the relationship between the secondary structure of proteins and their emulsifying ability has not been further investigated. This study used the addition of three different amino acids to influence the interaction between zein chains, which may induce changes in the secondary structure of the prepared zein complex particles. This study demonstrates that the emulsifying properties of proteins, such as dispersibility, zeta potential, three-phase contact angles, interfacial affinity, adsorption rates, and the volume of the stabilized oil phase, are closely related to the ß-sheet content of the complex particles, providing a theoretical reference for protein-based stabilizers. Additionally, amino acids, as the blocks of proteins, have high compatibility with proteins, and using amino acids as modifiers aligns with the safety requirements for food processing. In this study, the prepared zein-lysine complex particles have good emulsifying ability, capable of stabilizing a 50 (v/v)% emulsion at a lower concentration (10 mg mL-1), and the prepared emulsion exhibits high-temperature stability and ionic resistance. This characteristic makes the emulsion potentially valuable for application in systems with high salt concentrations and those that may undergo heat treatment.

Utilizing chitooligosaccharides from shrimp waste biodegradation via recombinant chitinase A: a promising approach for emulsifying hydrocarbon and bioremediation.

BACKGROUND: Hydrocarbon pollution stemming from petrochemical activities is a significant global environmental concern. Bioremediation, employing microbial chitinase-based bioproducts to detoxify or remove contaminants, presents an intriguing solution for addressing hydrocarbon pollution. Chitooligosaccharides, a product of chitin degradation by chitinase enzymes, emerge as key components in this process. Utilizing chitinaceous wastes as a cost-effective substrate, microbial chitinase can be harnessed to produce Chitooligosaccharides. This investigation explores two strategies to enhance chitinase productivity, firstly, statistical optimization by the Plackett Burman design approach to  evaluating the influence of individual physical and chemical parameters on chitinase production, Followed by  response surface methodology (RSM) which delvs  into the interactions among these factors to optimize chitinase production. Second, to further boost chitinase production, we employed heterologous expression of the chitinase-encoding gene in E. coli BL21(DE3) using a suitable vector. Enhancing chitinase activity not only boosts productivity but also augments the production of Chitooligosaccharides, which are found to be used as emulsifiers. RESULTS: In this study, we focused on optimizing the production of chitinase A from S. marcescens using the Plackett Burman design and response surface methods. This approach led to achieving a maximum activity of 78.65 U/mL. Subsequently, we cloned and expressed the gene responsible for chitinase A in E. coli BL21(DE3). The gene sequence, named SmChiA, spans 1692 base pairs, encoding 563 amino acids with a molecular weight of approximately 58 kDa. This sequence has been deposited in the NCBI GenBank under the accession number "OR643436". The purified recombinant chitinase exhibited a remarkable activity of 228.085 U/mL, with optimal conditions at a pH of 5.5 and a temperature of 65 °C. This activity was 2.9 times higher than that of the optimized enzyme. We then employed the recombinant chitinase A to effectively hydrolyze shrimp waste, yielding chitooligosaccharides (COS) at a rate of 33% of the substrate. The structure of the COS was confirmed through NMR and mass spectrometry analyses. Moreover, the COS demonstrated its utility by forming stable emulsions with various hydrocarbons. Its emulsification index remained stable across a wide range of salinity, pH, and temperature conditions. We further observed that the COS facilitated the recovery of motor oil, burned motor oil, and aniline from polluted sand. Gravimetric assessment of residual hydrocarbons showed a correlation with FTIR analyses, indicating the efficacy of COS in remediation efforts. CONCLUSIONS: The recombinant chitinase holds significant promise for the biological conversion of chitinaceous wastes into chitooligosaccharides (COS), which proved its potential in bioremediation efforts targeting hydrocarbon-contaminated sand.

The essential role of aggregation for the emulsifying ability of a fungal CYS-rich protein.

Biosurfactants are in demand by the global market as natural commodities suitable for incorporation into commercial products or utilization in environmental applications. Fungi are promising producers of these molecules and have garnered interest also for their metabolic capabilities in efficiently utilizing recalcitrant and complex substrates, like hydrocarbons, plastic, etc. Within this framework, biosurfactants produced by two Fusarium solani fungal strains, isolated from plastic waste-contaminated landfill soils, were analyzed. Mycelia of these fungi were grown in the presence of 5% olive oil to drive biosurfactant production. The characterization of the emulsifying and surfactant capacity of these extracts highlighted that two different components are involved. A protein was purified and identified as a CFEM (common in fungal extracellular membrane) containing domain, revealing a good propensity to stabilize emulsions only in its aggregate form. On the other hand, an unidentified cationic smaller molecule exhibits the ability to reduce surface tension. Based on the 3D structural model of the protein, a plausible mechanism for the formation of very stable aggregates, endowed with the emulsifying ability, is proposed. KEY POINTS: • Two Fusarium solani strains are analyzed for their surfactant production. • A cationic surfactant is produced, exhibiting the ability to remarkably reduce surface tension. • An identified protein reveals a good propensity to stabilize emulsions only in its aggregate form.

Microencapsulation of apricot kernel oil: Utilization of mushroom by-product as an emulsifier in oil-in-water emulsion.

The present study investigated mushroom by-products as a substitute for emulsifiers in the microencapsulation of apricot kernel oil. Mushroom by-product emulsions were more viscous and had higher centrifugal (85.88±1.19 %) and kinetic (90.52±0.98 %) stability than control emulsions (Tween 20 was used as emulsifier). Additionally, spray-drying mushroom by-product emulsions yielded a high product yield (62.56±1.11 %). Furthermore, the oxidative stability of powder products containing mushroom by-products was observed to be higher than that of the control samples. For an accelerated oxidation test, the samples were kept at various temperatures (20, 37, and 60 °C). TOTOX values were assessed as indicators of oxidation, with values exceeding 30 indicating oxidation of the samples. Of the samples stored at 60 °C, the non-microencapsulated apricot kernel oil oxidized by the fifth day (41.12±0.13 TOTOX value), whereas the powder samples containing the mushroom by-products remained unoxidized until the end of the tenth day (37.05±0.08 TOTOX value). This study revealed that mushroom by-products could be a viable alternative for synthetic emulsifiers in the microencapsulation of apricot kernel oil. It has been observed that using mushroom by-products instead of synthetic emulsifiers in oil microencapsulation can also delay oxidative degradation in microencapsulated powders.

Study on the Effect of Emulsifiers on the Properties of Oleogels Based on Olive Oil Containing Lidocaine.

Oleogels are semi-solid materials that consist primarily of liquid oil immobilized in a network of organized structural molecules, which provide stability and maintain the oil in the desired shape. Due to their structure, oleogels can stabilize large amounts of liquid, making them excellent carriers for active substances, both lipophilic and hydrophilic. This study presents the synthesis methodology and investigations of olive oil-based oleogels, which are among the healthiest and most valuable vegetable fats, rich in unsaturated fatty acids and antioxidants such as vitamin E. Two types of surfactants were used: TWEEN 80, which lowers surface tension and stabilizes emulsions, and SPAN 80, which acts in oil-dominated phases. The oleogels were enriched with lidocaine, an active substance commonly used as a pain reliever and local anesthetic. This research characterized the obtained oleogels regarding their medical applications, paying particular attention to the influence of surfactant type and amount as well as the active substance on their physicochemical properties. Structural analyses were also conducted using Fourier transform infrared (FTIR) spectroscopy, alongside rheological and sorption studies, and the wettability of the materials was evaluated. The stability of the obtained oleogels was verified using the MultiScan MS20 system, allowing for an assessment of their potential suitability for long-term pharmaceutical applications. The results indicated that SPAN-stabilized oleogels exhibited better stability and favorable mechanical properties, making them promising candidates for medical applications, particularly in pain relief formulations.

Antioxidant and Emulsifying Activity of the Exopolymer Produced by Bacillus licheniformis.

The exopolymer (ESPp) was obtained from Bacillus licheniformis IDN-EC, composed of a polyglutamic acid and polyglycerol phosphate chain O-substituted with αGal moieties (αGal/αGlcNH2 3:1 molar ratio) and with a 5000 Da molecular weight. The cytotoxicity activity of EPSp was determined by reducing the MTT (3-[4,5-dimethyl-thiazol-2-yl]-2,5-diphenyltetrazolium bromide) to formazan on HeLa cells. This EPS did not show cytotoxicity against the tested cell line. The ESPp presented great advantages as an antioxidant with free radical scavenging activities (1,1-diphenyl-2-picryl-hydrazyl radical (DPPH),hydroxyl radical (OH), and superoxide anion (O2-)) (65 ± 1.2%, 98.7 ± 1.9%, and 97 ± 1.7%), respectively. Moreover, EPSp increased the enzyme activity for catalase (CAT) and glutathione peroxidase (GSH-Px) in HeLa cells (CAT, 2.6 ± 0.24 U/mL; and GSH-Px, 0.75 ± 0.3 U/L). The presence of ESPp showed a significant protective effect against H2O2 in the cell line studied, showing great viability (91.8 ± 2.8, 89.9 ± 2.9, and 93.5 ± 3.6%). The EPSp presented good emulsifying activity, only for vegetable oils, olive oil (50 ± 2.1%) and sesame (72 ± 3%). Sesame was effective compared to commercials products, Triton X-100 (52.38 ± 1.6%), Tween 20 (14.29 ± 1.1%), and sodium dodecyl sulphate (SDS) (52.63 ± 1.6%). Furthermore, the EPS produced at 0.6 M has potential for environmental applications, such as the removal of hazardous materials by emulsification whilst resulting in positive health effects such as antioxidant activity and non-toxicity. EPSp is presented as a good exopolysaccharide for various applications.

Desmodium intortum (Mill.) Urb. Protein Isolate Aggregates as Pickering Stabilizers: Physicochemical Characteristics and Emulsifying Properties.

This work aimed to investigate the feasibility of fabricating Pickering emulsions stabilized by Desmodium intortum protein isolate (DIPI) aggregates. The DIPI aggregates were formed using heat treatment, and the effects of ionic strength and pH on their properties were investigated. The heat-treated protein exposes its hydrophobic groups due to structural damage, resulting in rapid aggregation of the protein into aggregates with a size of 236 nm. The results showed that the aggregates induced by ionic strength had larger particle size and higher surface hydrophobicity and partial wettability. Moreover, this study explored effective strategies for bolstering Pickering emulsion stability through optimized DIPI aggregate concentration (c) and oil fraction (ø). The DIPI Pickering emulsion (DIPIPE) formed at c = 5% and ø = 0.7 was still highly stable after 30 days of storage. As confirmed by laser confocal microscopy, DIPI aggregates could be adsorbed onto the oil-water interface to form a network structure that could trap oil droplets in the network. Collectively, the Pickering emulsion stabilized by DIPI aggregates exhibited excellent stability, which not only deeply utilizes the low-value protein resources in the Desmodium intortum for the first time, but also demonstrates the potential of DIPI for the bio-based field.

Green Synthesis of Blumea balsamifera Oil Nanoemulsions Stabilized by Natural Emulsifiers and Its Effect on Wound Healing.

In this study, we developed a green and multifunctional bioactive nanoemulsion (BBG-NEs) of Blumea balsamifera oil using Bletilla striata polysaccharide (BSP) and glycyrrhizic acid (GA) as natural emulsifiers. The process parameters were optimized using particle size, PDI, and zeta potential as evaluation parameters. The physicochemical properties, stability, transdermal properties, and bioactivities of the BBG-NEs under optimal operating conditions were investigated. Finally, network pharmacology and molecular docking were used to elucidate the potential molecular mechanism underlying its wound-healing properties. After parameter optimization, BBG-NEs exhibited excellent stability and demonstrated favorable in vitro transdermal properties. Furthermore, it displayed enhanced antioxidant and wound-healing effects. SD rats wound-healing experiments demonstrated improved scab formation and accelerated healing in the BBG-NE treatment relative to BBO and emulsifier groups. Pharmacological network analyses showed that AKT1, CXCL8, and EGFR may be key targets of BBG-NEs in wound repair. The results of a scratch assay and Western blotting assay also demonstrated that BBG-NEs could effectively promote cell migration and inhibit inflammatory responses. These results indicate the potential of the developed BBG-NEs for antioxidant and skin wound applications, expanding the utility of natural emulsifiers. Meanwhile, this study provided a preliminary explanation of the potential mechanism of BBG-NEs to promote wound healing through network pharmacology and molecular docking, which provided a basis for the mechanistic study of green multifunctional nanoemulsions.

Stability of high internal-phase emulsions prepared from phycocyanin and small-molecule sugars.

BACKGROUND: The use of high internal-phase Pickering emulsions in the food industry is widespread due to their excellent stability and special rheological properties. Proteins are often used as food-grade Pickering stabilizers due to their safety and nutritious properties. Nowadays, the development and efficient utilization of novel proteins as Pickering stabilizers has become a new challenge. RESULTS: Phycocyanin complexes with small-molecule sugars (SMS), formed as a result of non-thermal interactions, can serve as stabilizers for high internal-phase Pickering emulsions. The addition of SMS-enabled gel-like emulsions significantly reduced the amount of emulsifier used. When the SMS was sorbitol, the emulsion had excellent elastic properties and self-supporting ability and was stable during long-term storage, when subjected to centrifugation, and under different temperature conditions. The fluorescent property of phycocyanin was utilized to investigate the formation mechanism of the emulsion. Small-molecule sugars were able to form 'sugar-shell' structures on the surface of proteins to enhance the structural stability of proteins. Phycocyanin-SMS-stabilized emulsions provided superior protection for photosensitive and volatile substances. The retention rates of trans-resveratrol and n-hexane increased by 384.75% and 30.55%, respectively. CONCLUSION: These findings will encourage the development of proteins that stabilize Pickering emulsions. They will also provide new ideas for protecting photosensitive and volatile substances. © 2023 Society of Chemical Industry.

Effects of physical method and enzymatic hydrolysis on the properties of soybean fiber-rich stabilizer for oil in water emulsions.

BACKGROUND: Okara is a by-product from the soybean industry and an abundant resource of insoluble soybean fiber (ISF). ISF with various properties could be obtained by different extraction methods. It is an attractive option to utilize okara by taking advantage of ISF as an emulsifier or stabilizer. RESULTS: Compared with the untreated ISF (ISFUT ), superfine grinding reduced the particle size and viscosity of ISF (ISFSG ). Steam explosion increased the water solubility from 17.5% to 51.7% but decreased the water holding capacity and swelling capacity of ISF (ISFSE ) from 15.0 and 14.0 g/g to 4.2 and 3.3 g/g, respectively. Emulsions prepared by ISFUT and ISFSG before or after enzymatic hydrolysis presented large oil droplets and were unstable. Although emulsions prepared by ISFSE after enzymatic hydrolysis (ISFSE-E ) showed flocculation, the volume-weighted average diameter (19.7 µm) were the smallest while the viscosity and viscoelastic modulus were the highest, and exhibited excellent physical stability during storage. CONCLUSION: ISF obtained by physical and hydrolysis treatment displayed diverging physicochemical properties while ISF prepared by steam explosion-enzymatic hydrolysis presented the best potential to stabilize emulsions. The present study could provide novel information about the utilization of okara by the application of ISF as an emulsifier or stabilizer. © 2023 Society of Chemical Industry.

Properties of OSA-esterified insoluble fraction of Persian gum and its application in dairy cream.

BACKGROUND: In the present study, the insoluble fraction of Persian gum (IFPG) was modified with octenyl succinic anhydride (OSA) and its various properties were assessed. In addition, the effect of OSA-IFPG on the rheological and textural properties of dairy cream was investigated. RESULTS: Suitable conditions for achieving a degree of substitution (DS) of 0.023 were found at pH 9, IFPG concentration 4 wt%, OSA concentration 10 wt% and a temperature of 40 °C, within 120 min. The carbonyl group attachment in OSA-IFPG was also confirmed via Fourier transform infrared and H-nuclear magnetic resonance spectroscopy (1 H-NMR). While the X-ray diffraction test indicated no significant changes in the structure of the IFPG after modification with OSA, esterification increased the negative charge density, decreased thermal decomposition temperature and increased the emulsifying capacity to 100%, which was obtained for the first time. The use of OSA-modified IFPG in creams augmented the complex viscosity, loss and storage modulus, while also demonstrating the creation of a pseudo-gel network. The hardness and adhesiveness of the texture increased, which can be explained by the formation of a compact structure and reduced particle size. CONCLUSION: Overall, OSA-IFPG with hydrophilic and hydrophobic sections may function as an emulsifier and be recommended as a safe source of hydrocolloids for emulsion stability. It can also provide a positive physical structure when added to dairy cream, even if the fat concentration is lower than usual. © 2023 Society of Chemical Industry.

Effect of synergism of sucrose ester and xanthan gum on the stability of walnut milk.

BACKGROUND: Single emulsifiers have an effect on the stability of plant protein drinks, giving some improvement. Emulsifiers are more effective in maintaining emulsion stability when combined with polysaccharides such as xanthan gum. In this paper, we studied the food-grade emulsifier sucrose ester and measured the average particle size, polydispersity value, zeta potential, microrheological properties, microstructure and creaming index related to walnut protein emulsion by constructing a walnut protein emulsion simulation system. SDS-PAGE and low-field NMR were used to analyze the relative molecular masses of emulsions and the water distribution of emulsions, respectively, to further investigate the synergistic effects of sucrose esters and xanthan gum on the ease of emulsification and intrinsic mechanisms of different molecular weight proteins of walnut protein emulsions. RESULTS: The results indicate that the synergistic effect of sucrose esters and xanthan gum was to stabilize emulsions better than single emulsifiers. Xanthan gum and protein may form protein-polysaccharide complexes, as well as the hydrophobic interaction between sucrose ester and xanthan gum. The properties of xanthan gum can improve the stability of the emulsion by affecting the mechanical properties of walnut protein emulsion, and the combination of sucrose ester and xanthan gum can better stabilize large protein molecules. CONCLUSION: The results not only provide a theoretical basis for the stability of plant protein emulsion systems, but also provide technical support for the production and processing of large-molecule plant proteins into emulsions in this field for improving their stability, and also provide more possibilities for other types of emulsions. © 2023 Society of Chemical Industry.

Effect of pH on the emulsifying performance of protein-polysaccharide complexes.

BACKGROUND: Protein-polysaccharide complexes have been successfully used for emulsion stabilization. However, it is unclear how the complex's surface charge influences aggregation stability and coalescence stability of emulsions, and whether a low charged interfacial film can still maintain the coalescence stability of oil droplets. In the present study, the effects of pH (around the pI of protein) on the aggregation and coalescence stability of emulsions were investigated. RESULTS: Whey protein isolate (WPI) and peach gum polysaccharides (PGP) complexes (WPI-PGP complexes) were synthesized at pH 3, 4 and 5. Their sizes were 598, 274 and 183 nm, respectively, and their ζ-potentials were +2.9, -8.6 and -22.8 mV, respectively. Interface rheological experiments showed that WPI-PGP complex at pH 3 had the lowest interfacial tension, and formed the softest film compared to the complexes at pH 4 and 5. Microfluidic experiments showed that all WPI-PGP complexes were able to stabilize droplets against coalescence within short timescales (milliseconds). At pH 3, no coalescence was observed even under conditions where the continuous phase flow influenced the shape of oil droplets (from spheres to ellipsoids). At pH 4 and 5, the model emulsions were stable over 16 days of storage, extensive aggregation and creaming occurred at pH 3 after 8 days. Importantly, no coalescence took place. CONCLUSION: The present study confirmed that the aggregation stability of the emulsions was mainly determined by the surface charge of the complex, whereas the coalescence stability of emulsions is expectedly determined by steric repulsion, providing new insights into how to prepare stable food emulsions. © 2024 Society of Chemical Industry.

Nanofibers from soybean hull insoluble polysaccharides as Pickering stabilizers in oil-in-water emulsions formulated under acidic conditions.

BACKGROUND: Pickering emulsions are a kind of emulsion stabilized by solid particles. These particles generate a physical or mechanical barrier that provides long-term stability to emulsion. Cellulose nanofibers are effective Pickering emulsifiers given their long length, high flexibility and entanglement capability. In this work, soybean hull insoluble polysaccharides (HIPS) were used as source of cellulose nanofibers by using a combination of chemical and mechanical treatment. The chemical composition, morphology, flow behavior, water holding capacity (WHC) and emulsifying properties of the nanofibers were studied. RESULTS: Nanofibers with diameters between 35 and 110 nm were obtained. The WHC increased significantly after the mechanical treatment, and the rheological behavior of the nanofibers was typical of cellulosic materials. Nanofibers were effective emulsifiers in oil-in-water (O/W) emulsions formulated under acidic conditions, without the need of using any additional surfactant. Emulsions were not affected by changes in the pH of the medium (3.00-5.00), and were stable to coalescence. CONCLUSION: It is possible that cellulose nanofibers form an entangled network which acts as a mechanical steric barrier, providing stability to coalescence. These results are important for the development of effective O/W Pickering emulsifiers/stabilizers, with large applications in the food industry. © 2023 Society of Chemical Industry.

Fabrication of soy protein-polyphenol covalent complex nanoparticles with improved wettability to stabilize high-oil-phase curcumin emulsions.

BACKGROUND: Recent studies have shown that the wettability of protein-based emulsifiers is critical for emulsion stability. However, few studies have been conducted to investigate the effects of varying epigallocatechin gallate (EGCG) concentrations on the wettability of protein-based emulsifiers. Additionally, limited studies have examined the effectiveness of soy protein-EGCG covalent complex nanoparticles with improved wettability as emulsifiers for stabilizing high-oil-phase (≥ 30%) curcumin emulsions. RESULTS: Soy protein isolate (SPI)-EGCG complex nanoparticles (SPIEn) with improved wettability were fabricated to stabilize high-oil-phase curcumin emulsions. The results showed that EGCG forms covalent bonds with SPI, which changes its secondary structure, enhances its surface charge, and improves its wettability. Moreover, SPIEn with 2.0 g L -1 EGCG (SPIEn-2.0) exhibited a better three-phase contact angle (56.8 ± 0.3o) and zeta potential (-27 mV) than SPI. SPIEn-2.0 also facilitated the development of curcumin emulsion gels at an oil volume fraction of 0.5. Specifically, the enhanced network between droplets as a result of the packing effects and SPIEn-2.0 with inherent antioxidant function was more effective at inhibiting curcumin degradation during long-term storage and ultraviolet light exposure. CONCLUSION: The results of the present study indicate that SPIEn with 2.0 g L -1 EGCG (SPIEn-2.0) comprises the optimum conditions for fabricating emulsifiers with improved wettability. Additionally, SPIEn-0.2 can improve the physicochemical stability of high-oil-phase curcumin emulsions, suggesting a novel strategy to design and fabricate high-oil-phase emulsion for encapsulating bioactive compounds. © 2024 Society of Chemical Industry.

Revealing the synergistic effect of hydration and pulsed ultrasound on the emulsifying properties of silkworm pupa protein and its stabilized emulsion.

BACKGROUND: Silkworm (Bombyx moil L.) Pupa protein (SPP) is a high-quality insect protein and is considered a sustainable alternative source for traditional animal food protein. However, the utilization of SPP is limited because of its low solubility and emulsifying ability. In the present study, the synergistic effect of hydration and pulsed ultrasound on the physicochemical properties of SPP and SPP-stabilized Pickering emulsions was evaluated. RESULTS: Pulsed ultrasound changed the particle size of SPP and its conformation. As the pulsed ultrasound increased from 0 s to 5 s, the α-helix and SS contents of SPP decreased, whereas the ß-sheet and SH contents increased, which in turn improved its solubility and amphiphilicity. As a result, the SPP treated by a combination of 12 h of hydration and 3 s of ultrasound exhibited a contact angle of 74.95°, hydrophobicity of 904.83, EAI of 6.66 m2 g-1 and ESI of 190.69 min. Compared with the combination of 1 h of hydration and 5 s of ultrasound, the combination of 12 h of hydration and 3 s of ultrasound exerted more soluble and hydrophobic SPP, whereas the EAI and ESI of the samples were higher. Notably, the ultrasound-treated SPP can form a stable gel-like emulsion (oil fraction ranging from 70% to 80%). CONCLUSION: The combination of hydration and ultrasound can effectively improve the physicochemical characteristics of SPP as well as its emulsion stability. Sufficient hydration is a cost-effective method for facilitating the modification of proteins by ultrasound treatment. © 2024 Society of Chemical Industry.

The effects of different types of polysaccharides on the structure and physical properties of W/O/W emulsions under varying pH conditions.

BACKGROUND: Biopolymer based water-in-oil-in-water double (W1/O/W2) emulsion systems comprise a complex emulsion system that might be affected by several factors and the status at multiple phases. The present study investigated the physicochemical properties of W1/O/W2 double emulsions with inner W1 phase incorporated with various polysaccharides and the outer phase stabilized by whey protein isolate (WPI). Six different polysaccharides were selected as co-emulsifiers in the inner phase, and their effects on morphology, droplet size, zeta potential and rheology properties were evaluated. Furthermore, the impact of WPI/polysaccharide concentration and pH on the physicochemical properties and storage stability of the emulsions was compared. RESULTS: Emulsions with an inner phase incorporated with xanthan gum and carrageenan exhibited better stability than others. Increasing the concentration of WPI enhanced the overall stability of the double emulsion, although it compromised the integrity of the internal W1/O interface. On the other hand, a 1.0% concentration of polysaccharide, specifically when carrageenan is used, slowed down droplet floating and coagulation. An acidic external aqueous phase (pH 4) led to larger and more uniform particle size distributions, as well as enhanced stability. The lower pH decreased the viscosity and delayed molecular exchange in the oil phase, thereby preserving the structure of the double emulsion. CONCLUSION: These findings contribute to a better understanding of the factors influencing the stability and properties of W1/O/W2 double emulsions with addition of anionic polysaccharides in the inner water phase. © 2024 Society of Chemical Industry.

Preparation of oil-in-water emulsions stabilized by faba bean protein-grape leaf polyphenol conjugates: pH-, salt-, heat-, and freeze-thaw-stability.

BACKGROUND: Plant proteins are being increasingly utilized as functional ingredients in foods because of their potential health, sustainability, and environmental benefits. However, their functionality is often worse than the synthetic or animal-derived ingredients they are meant to replace. The functional performance of plant proteins can be improved by conjugating them with polyphenols. In this study, the formation and stability of oil-in-water emulsions prepared using faba bean protein-grape leaf polyphenol (FP-GLP) conjugates as emulsifiers. Initially, FP-GLP conjugates were formed using an ultrasound-assisted alkali treatment. Then, corn oil-in-water emulsions were prepared using high-intensity sonication (60% amplitude, 10 min) and the impacts of conjugate concentration, pH, ionic strength, freezing-thawing, and heating on their physicochemical properties and stability were determined. RESULTS: Microscopy and light scattering analysis showed that oil-in-water emulsions containing small oil droplets could be formed at conjugate concentrations of 2% and higher. The addition of salt reduced the electrostatic repulsion between the droplets, which increased their susceptibility to aggregation. Indeed, appreciable droplet aggregation was observed at ≥ 50 mmol/L sodium chloride. The freeze-thaw stability of emulsions prepared with protein-polyphenol conjugates was better than those prepared using the proteins alone. In addition, the emulsions stabilized by the conjugates had a higher viscosity than those prepared by proteins alone. CONCLUSION: This study showed that FP-GLP conjugates are effective plant-based emulsifiers for forming and stabilizing oil-in-water emulsions. Indeed, emulsions formed using these conjugates showed improved resistance to pH changes, heating, freezing, and salt addition. © 2024 The Authors. Journal of The Science of Food and Agriculture published by John Wiley & Sons Ltd on behalf of Society of Chemical Industry.

Use of olive and sunflower protein hydrolysates for the physical and oxidative stabilization of fish oil-in-water emulsions.

BACKGROUND: Olive and sunflower seeds are by-products generated in large amounts by the plant oil industry. The technological and biological properties of plant-based substrates, especially protein hydrolysates, have increased their use as functional ingredients for food matrices. The present study evaluates the physical and oxidative stabilities of 50 g kg-1 fish oil-in-water emulsions where protein hydrolysates from olive and sunflower seeds were incorporated at 20 g kg-1 protein as natural emulsifiers. The goal was to investigate the effect of protein source (i.e. olive and sunflower seeds), enzyme (i.e. subtilisin and trypsin) and degree of hydrolysis (5%, 8% and 11%) on the ability of the hydrolysate to stabilize the emulsion and retard lipid oxidation over a 7-day storage period. RESULTS: The plant protein hydrolysates displayed different emulsifying and antioxidant capacities when incorporated into the fish oil-in-water emulsions. The hydrolysates with degrees of hydrolysis (DH) of 5%, especially those from sunflower seed meal, provided higher physical stability, regardless of the enzymatic treatment. For example, the average D [2, 3] values for the emulsions containing sunflower subtilisin hydrolysates at DH 5% only slightly increased from 1.21 ± 0.02 µm (day 0) to 2.01 ± 0.04 µm (day 7). Moreover, the emulsions stabilized with sunflower or olive seed hydrolysates at DH 5% were stable against lipid oxidation throughout the storage experiment, with no significant variation in the oxidation indices between days 0 and 4. CONCLUSION: The results of the present study support the use of sunflower seed hydrolysates at DH 5% as natural emulsifiers for fish oil-in-water emulsions, providing both physical and chemical stability against lipid oxidation. © 2024 Society of Chemical Industry.