Fluoride Levels in Unstimulated Whole Saliva following Clinical Application of Different 5% NaF Varnishes.

The aim of this study was to evaluate the fluoride release from differently formulated 5% NaF varnishes into unstimulated whole saliva in vivo. The fluoride concentration in unstimulated whole saliva was determined after the application of 3 different 5% NaF varnishes (5% NaF, 5% NaF + tricalcium phosphate [TCP], and 5% NaF + amorphous calcium phosphate [ACP]) or a placebo. Fifteen subjects were recruited and enrolled following Institutional Review Board approval based upon the inclusion/exclusion criteria of this study. A cross-over study design was used for the application of either one of the 5% NaF varnishes or a placebo. Unstimulated whole saliva was collected at baseline and at 1, 4, 6, 26, and 50 h following application and analyzed for supernatant ionic fluoride and whole fluoride by microdiffusion. Linear mixed-effects models (5% significance level) were used to determine the effects of varnish and time on the salivary fluoride concentration. The highest amount of fluoride in saliva was found 1 h after application of the fluoride varnishes, with no significant differences among the treatment varnishes with respect to whole fluoride but with lower levels for 5% NaF + ACP in the saliva supernatant. Salivary fluoride levels at 4, 6, and 26 h decreased at each time point and were generally significantly higher for 5% NaF and 5% NaF + TCP. After 50 h, fluoride levels in saliva for all groups were at or below baseline levels. In conclusion, the formulation of other ingredients in fluoride varnishes can affect the fluoride concentration in saliva. The reasons for this phenomenon warrant further investigation since it might affect efficacy of the treatment. This trial is registered at ClinicalTrials.gov (NCT01629290).

Children's Menu Diversity: Influence on Fluoride Absorption and Excretion.

AIM: The aim of this study is to determine the influence of children's menu diversity on the absorption and excretion of fluoride. MATERIALS AND METHODS: The experimental, longitudinal, quantitative study was carried out in a city without fluoridation in water supply. A total of 16 adult volunteers (>63.9 kg) participated in the study who, after a 12-hour fast, ingested two types of children's meals, whose quantity and diversity were determined after weighing the meals best consumed by children at a kindergarten in Campinas, Sao Paulo: Simple child meal (SCM; n = 8) and hearty child meal (HCM; n = 8). The fluoride gel residual after professional application (12,300 ppm, 30.75 mg F, pH = 4.65) was simulated 15 minutes after feeding. Saliva samples (in time intervals of 0, 15, 30, and 45 minutes and 1, 2, 3, 4, 6, and 12 hours after ingestion of the fluorine solution) and urine of the volunteers were analyzed at 24 hours. Fluoride concentrations were determined using a selective ion electrode. Data were analyzed by analysis of variance for repeated measurements (PROC MIXED)/Tukey-Kramer. RESULTS: The concentrations of fluoride in saliva at 0 and 15 minutes and after 6 hours were the same between groups (p > 0.05). From 30 minutes to 4 hours after ingestion, the SCM group showed a higher concentration of fluoride in the saliva, which has a higher absorption (p < 0.05). The fluoride concentration in the urine did not differ between groups at both collection times (p > 0.05), and for both, the fluoride concentration in the urine increased in the final measurement (p < 0.05). CONCLUSION: The children's menu diversity influenced the absorption of fluoride so that the topical application of fluoride should be performed in infants fed preferably after the fuller diet and following the established guidelines to ensure the safety of the procedure. CLINICAL SIGNIFICANCE: Knowledge of the influence of the children's menu diversity on fluoride metabolism after professional application is important so that the actions of fluoride therapy may be planned in a safer manner and be based on the reality of the universe of children.

Mechanism of Action of TiF4 on Dental Enamel Surface: SEM/EDX, KOH-Soluble F, and X-Ray Diffraction Analysis.

This in vitro study aimed to evaluate the action of TiF4 on sound and carious bovine and human enamel. Sound (S) and pre-demineralised (DE) bovine and human (primary and permanent) enamel samples were treated with TiF4 (pH 1.0) or NaF varnishes (pH 5.0), containing 0.95, 1.95, or 2.45% F for 12 h. The enamel surfaces were analysed using SEM-EDX (scanning electron microscopy/energy-dispersive X-ray spectroscopy) (n = 10, 5 S and 5 DE) and KOH-soluble fluoride was quantified (n = 20, 10 S and 10 DE). Hydroxyapatite powder produced by precipitation method was treated with the corresponding fluoride solutions for 1 min (n = 2). The formed compounds were detected using X-ray diffraction (XRD). All TiF4 varnishes produced a coating layer rich in Ti and F on all types of enamel surface, with micro-cracks in its extension. TiF4 (1.95 and 2.45% F) provided higher fluoride deposition than NaF, especially for bovine enamel (p < 0.0001). It also induced a higher fluoride deposition on DE samples compared to S samples (p < 0.0001), except for primary enamel. The Ti content was higher for bovine and human primary enamel than human permanent enamel, with some differences between S and DE. The XRD analysis showed that TiF4 induced the formation of new compounds such as CaF2, TiO2, and Ti(HPO4)2·H2O. In conclusion, TiF4 (>0.95% F) interacts better, when compared to NaF, with bovine and human primary enamel than with human permanent enamel. TiF4 provoked higher F deposition compared to NaF. Carious enamel showed higher F uptake than sound enamel by TiF4 application, while Ti uptake was dependent on the enamel condition and origin.

In vitro evaluation of surface properties of Pro Seal® and Opal® SealTM in preventing white spot lesions.

OBJECTIVES: To evaluate the surface properties of two commercially available sealants (Pro Seal® (PS) and Opal® SealTM (OS)) in terms of fluoride(F) release, biofilm formation of Streptococcus mutans and Lactobacillus and the ability to resist acid penetration. SETTING: University of Nebraska Medical Center. MATERIAL & METHODS: Discs of similar diameter and thickness were made from OS and PS. Discs were soaked in double-distilled water, and F released was measured with fluoride meter daily for 14 consecutive days, then at 21 and 28 days. Biofilm formation was evaluated with Streptococcus mutans and Lactobacilli grown on sealant discs using confocal microscopy. Extracted human teeth (n=8) with sealant-coated buccal surfaces and untreated lingual surfaces were exposed to 0.1M lactic acid(pH=4.5) to test the acid penetration. After 1-4 weeks of exposure, teeth were subjected to microhardness testing and SEM microscopy. RESULTS: PS released significantly higher levels of F than OS. PS showed more S. mutans adherence than OS, whereas Lactobacillus did not show any differences in adherence. Both sealants protected enamel surfaces, showing statistically significant difference in the depth of acid penetration compared to their unsealed control sides. CONCLUSION: F release was adequate to aid in remineralization, although clinically it would not likely aid in preventing demineralization as there was no prolonged release of F by both sealants tested. S. mutans adherence to OS surface was less compared to PS surface, which could be of relevance in biofilm formation and white spot lesions. Both sealants protected enamel surfaces from acid penetration.

Urinary fluoride excretion after application of fluoride varnish and use of fluoride toothpaste in young children.

BACKGROUND: The efficacy and safety of combined use of topical fluoride products are essential issues that must be monitored. AIM: To assess urinary excretion of fluoride after application of two different dental varnishes containing 2.26% fluoride in 3- to 4-year-old children and to compare the levels with and without parallel use of fluoride toothpaste. DESIGN: Fifteen healthy children were enrolled to a randomized crossover trial that was performed in two parts: Part I with twice-daily tooth brushing with fluoride toothpaste and Part II with twice-daily brushing with a non-fluoride toothpaste. After a 1-week run-in period, 0.1 mL of the two fluoride varnishes (Duraphat and Profluorid Varnish) was topically applied in a randomized order. Baseline and experimental urine was collected during 6-h periods. The fluoride content was determined with an ion-sensitive electrode. RESULTS: There was a statistically significant increase in the 6-h fluoride excretion after application of both experimental varnishes, with and without parallel use of fluoride toothpaste (P < 0.01). When fluoridated toothpaste was used, the mean fluoride excretion was 0.20 mg/6 h after application of Duraphat and 0.29 mg/6 h after application of Profluorid Varnish (P = 0.18). CONCLUSIONS: Topical applications of 0.1 mL of fluoride varnish significantly increased the 6-h fluoride excretion. As some individuals displayed excretion levels exceeding the optimal fluoride exposure, a restricted use of fluoride toothpaste in connection with the varnish applications would decrease fluoride exposure.

The effect of fluoride varnishes on caries lesions: an in vitro investigation.

OBJECTIVES: The purpose of this study was to investigate the effect of five commercially available fluoride varnishes (FV) on caries lesions. MATERIALS AND METHODS: Ninety bovine enamel specimens were assigned to five varnish groups (n = 18). Early caries lesions were created in the specimens and characterized using Vickers surface microhardness number (VHN). FV was applied to each group of specimens. Immediately afterwards, 7.5 ml of artificial saliva (AS) were pipetted over each group of specimens, collected and renewed every 15 min for 6 h. AS samples were analyzed for fluoride using an ion-specific electrode. Enamel fluoride uptake (EFU) was determined using the acid etch technique. Each group was then subjected to a pH cycling regimen for 5 days after which VHN was determined again. One-way analysis of variance (ANOVA) was used for data analysis. RESULTS: FVs differed in their rehardening capability (highest mean value was for Enamel Pro = 32.3 ± 5.8 and lowest mean value was for Vanish = 18.9 ± 11.3). No significant difference in EFU was found among groups. Total fluoride release over 6 h was in the order of MI Varnish (303 µg/ml) > Enamel Pro (217 µg/ml) > Flor-Opal (153 µg/ml) > PreviDent(84 µg/ml) > Vanish(28 µg/ml). CONCLUSIONS: ΔVHN and fluoride release characteristics differ among FV products. These differences may be attributed to the different compositions and physical properties of the tested FV. CLINICAL RELEVANCE: Fundamental, comparable research on FV and how different formulations affect early caries lesion rehardening, fluoride release into saliva, and uptake by teeth is scarce.

Assessment of the Influence of Meal Type on Fluoride Absorption due to Ingestion of professionally Applied Gels.

AIMS: The aim of this study is to assess the influence of eating, prior to application of professionally used gels, on the rate of fluoride absorption due to the ingestion of 1.23% acidulated phosphate fluoride (APF). MATERIALS AND METHODS: After fasting for 12 hours, 16 adult volunteers (> 65 kg) ingested two types of meal: Breakfast (n = 8) and Lunch (n = 8). Accidental ingestion of fluoride gel used in molding trays was simulated (12,300 ppm; 61.5 mg F; pH = 4.65) 15 minutes after eating. After ingestion of the fluoride solution, 3 mL of venous blood were collected at the following times: Zero (before ingestion) and 15, 30, 45 minutes, 1, 2, and 3 hours. Fluoride concentrations in blood plasma were determined using an ion selective electrode. RESULTS: With the exception of time 0 (p > 0.05), the average blood plasma concentration of the breakfast group (BG) (0.34 ± 0.04 mg/L) was higher than that of the lunch group (LG) (0.24 ± 0.03 mg/L), with the moment of peak concentration being 2 hours after ingestion for both groups (BG = 0.4 mg/L; LG = 0.28 mg/L). CONCLUSION: Results reinforce the idea that eating before undergoing professional application of fluoride is a factor of extreme importance regarding its safety, and that the time following a patient's heaviest meal should be the time of choice for planning clinical care. CLINICAL SIGNIFICANCE: Our results should be considered when planning collective action that involves the application of the gel on children in a school environment, thus ensuring the procedure's safety.

Fluoride Varnishes--Is There a Correlation Between Fluoride Release and Deposition on Enamel?

PURPOSE: Fluoride uptake of enamel after application of fluoride varnishes was compared with fluoride release into artificial saliva. The hypothesis was that fluoride uptake is higher for products exhibiting faster fluoride release. MATERIALS AND METHODS: Fluoride varnishes, i.e. Fluor Protector S, Duraphat, MI Varnish, Clinpro White Varnish, Profluorid Varnish and Enamel Pro Varnish were applied on bovine enamel specimens. Subsequently, specimens were incubated in artificial saliva. After removal of the varnishes, surface bound fluoride was extracted with potassium hydroxide and measured with an ion-selective electrode. Structurally bound fluoride was etched from the same specimens with perchloric acid. Fluoride release of varnish films into artificial saliva was measured for comparison. RESULTS: After 4 h in artificial saliva, the highest total enamel fluoride uptake of 47.9 µg F·cm-² was found with Fluor Protector S, followed by Enamel Pro Varnish with 22.1 µg F·cm-². The other products ranged between 12-16 µg F·cm-². This was several times higher than the negative control. Fluoride uptake did not correlate with release into artificial saliva. During the first 4 h, Duraphat released the lowest and MI Varnish the highest amount of fluoride with 7.7 and 249 µg F·cm-², respectively. The fluoride uptake of these two products was not statistically different. CONCLUSION: Enamel fluoride uptake cannot be predicted from the fluoride release rate of a product. Hence, based on the results of this study, fluoride release into artificial saliva is no measure for the efficacy of a fluoride varnish.

Enhanced penetration of fluoride particles into bovine enamel by combining dielectrophoresis with AC electroosmosis.

Fluoride deposition into the pores of enamel is necessary at high concentrations to reduce enamel demineralization and with a high degree of penetration to account for loss by ingestion. Current diffusion and electrochemical methods are inadequate for effectively transporting fluoride greater than 20 µm into enamel. The study explores the coupling of dielectrophoresis (DEP) and AC electroosmosis (ACEO) to selectively concentrate fluoride particles from fluoride gel excipients and enhance their penetration into enamel. By measuring the frequency response of approximately 10-µm-sized sodium fluoride particles in an aqueous gel media, appropriate frequencies for positive DEP, negative DEP, and ACEO are identified. An assembly composed of two cross-planar interdigitated electrode (IDE) arrays with open slots is driven successively by fields at appropriate frequencies to drive fluoride particles through the slots of the IDE and into the enamel pores using a combination of DEP and ACEO methods. Fluoride uptake and penetration of 1.23% acidulated phosphate fluoride gel into bovine tooth enamel at various depths is measured using wavelength dispersive spectrometry to compare deposition by diffusion, DEP, and DEP plus ACEO. Fluoride levels in all DEP groups were significantly higher than diffusion groups at depths 10 and 20 µm. The highest fluoride concentrations at 10, 20, 50, and 100 µm depths occur under deposition conditions combining DEP with ACEO. Fluoride levels at 50 µm were equivalent to long-term prophylactic exposure. These methods may potentially benefit populations at high risk for development of caries and periodontal disease, including underserved children and disparate groups.

Short term serum pharmacokinetics of diammine silver fluoride after oral application.

BACKGROUND: There is growing interest in the use of diammine silver fluoride (DSF) as a topical agent to treat dentin hypersensitivity and dental caries as gauged by increasing published research from many parts of the world. While DSF has been available in various formulations for many years, most of its pharmacokinetic aspects within the therapeutic concentration range have never been fully characterized. METHODS: This preliminary study determined the applied doses (3 teeth treated), maximum serum concentrations, and time to maximum serum concentration for fluoride and silver in 6 adults over 4 h. Fluoride was determined using the indirect diffusion method with a fluoride selective electrode, and silver was determined using inductively coupled plasma-mass spectrometry. The mean amount of DSF solution applied to the 3 teeth was 7.57 mg (6.04 µL). RESULTS: Over the 4 hour observation period, the mean maximum serum concentrations were 1.86 µmol/L for fluoride and 206 nmol/L for silver. These maximums were reached 3.0 h and 2.5 h for fluoride and silver, respectively. CONCLUSIONS: Fluoride exposure was below the U.S. Environmental Protection Agency (EPA) oral reference dose. Silver exposure exceeded the EPA oral reference dose for cumulative daily exposure over a lifetime, but for occasional use was well below concentrations associated with toxicity. This preliminary study suggests that serum concentrations of fluoride and silver after topical application of DSF should pose little toxicity risk when used in adults. CLINICAL TRIALS REGISTRATION: NCT01664871.

Comparison of effects of diode laser and CO2 laser on human teeth and their usefulness in topical fluoridation.

Various authors have reported more effective fluoridation from the use of lasers combined with topical fluoride than from conventional topical fluoridation. Besides the beneficial effect of lasers in reducing the acid solubility of an enamel surface, they can also increase the uptake of fluoride. The study objectives were to compare the action of CO(2) and GaAlAs diode lasers on dental enamel and their effects on pulp temperature and enamel fluoride uptake. Different groups of selected enamel surfaces were treated with amine fluoride and irradiated with CO(2) laser at an energy power of 1 or 2 W or with diode laser at 5 or 7 W for 15 s each and compared to enamel surfaces without treatment or topical fluoridated. Samples were examined by means of environmental scanning electron microscopy (ESEM). Surfaces of all enamel samples were then acid-etched, measuring the amount of fluoride deposited on the enamel by using a selective ion electrode. Other enamel surfaces selected under the same conditions were irradiated as described above, measuring the increase in pulp temperature with a thermocouple wire. Fluorination with CO(2) laser at 1 W and diode laser at 7 W produced a significantly greater fluoride uptake on enamel (89 ± 18 mg/l) and (77 ± 17 mg/l) versus topical fluoridation alone (58 ± 7 mg/l) and no treatment (20 ± 1 mg/l). Diode laser at 5 W produced a lesser alteration of the enamel surface compared to CO(2) laser at 1 W, but greater pulp safety was provided by CO(2) laser (ΔT° 1.60° ± 0.5) than by diode laser (ΔT° 3.16° ± 0.6). Diode laser at 7 W and CO(2) laser at 2 W both caused alterations on enamel surfaces, but great pulp safety was again obtained with CO(2) (ΔT° 4.44° ± 0.60) than with diode (ΔT° 5.25° ± 0.55). Our study demonstrates that CO(2) and diode laser irradiation of the enamel surface can both increase fluoride uptake; however, laser energy parameters must be carefully controlled in order to limit increases in pulpal temperature and alterations to the enamel surface.

Effect of fluorides from various restorative materials on remineralization of adjacent tooth: an in vitro study.

The aim of the study was to evaluate the extent of surface zone remineralization and the effect of fluoride at the inter-proximal adjacent tooth surface, using restorative materials FusionAlloy, Ketac-Fil and Heliomolar. Ninety extracted molar teeth were used of which 45 were placed in artificial caries for 10 weeks. The remaining 45 teeth were filled with the respective restorative materials, mounted with the artificial carious teeth in proximal contact with plaster and placed in artificial saliva for a period of 28 days. Finally, sectioning of artificially carious teeth was done mesio-distally and observed under the optical microscope and scanning electron microscope. Comparison among the groups was done by one-way analysis of variance [ANOVA] and Fischer's F test. Intercomparison between the groups was done by using Dunnett's t-test. Results obtained from transmitted electron microscopic and scanning electron microscopic observations were almost similar with the Ketac-Fil and Heliomolar showing better results in surface zone remineralization compared to FusionAlloy. Also, Ketac-Fil is a good material in releasing fluoride to remineralize enamel when compared to Heliomolar and FusionAlloy. Thus, it can be used mainly in class II cavity restorations of primary and permanent dentitions due to the potential ability of fluoride containing glass ionomer cements and composite resins to remineralize incipient carious lesions on adjacent teeth.

Comparison of in vitro fluoride uptake from whitening toothpastes and a conventional toothpaste in demineralised enamel.

Studies on the compatibility of abrasives and fluoride compounds deal exclusively with fluoride uptake and remineralization after storing the enamel specimens in a toothpaste-saliva mixture. The influence of brushing on the fluoride uptake when highly abrasive toothpastes are used has hardly been investigated so far. The aim of the present study was to investigate fluoride uptake in initially demineralised dental enamel after storage in, or brushing with, whitening toothpaste slurries, compared to a conventional toothpaste. For this purpose two widely available whitening toothpastes with ionically bound fluoride (sodium fluoride NaF), two with covalently-bound fluoride toothpastes (sodium monofluorophosphate, NaMFP) and a conventional amine fluoride toothpaste (AmF) were compared. The fluoride uptake after use of the AmF toothpaste was shown to be statistically significantly higher than that after application of the NaF toothpastes, which in turn was statistically significantly higher than the uptake resulting from NaMFP application. The fluoride uptake was slightly higher when the enamel samples were brushed with NaF toothpaste, rather than just stored in the respective toothpaste slurry. Brushing with highly abrasive toothpastes did not negatively influence fluoride uptake in demineralised dental enamel. The ionic form of the fluoride in toothpastes appears to be critical for increased fluoride uptake. The acidic components of the AmF toothpaste improved fluoride uptake compared to alkaline NaF toothpastes.

Modified toothpaste application using prepared toothpaste delivering technique increases interproximal fluoride toothpaste delivery.

OBJECTIVES: We devised a "prepared toothpaste delivering technique" (PTD technique), a modified the application of toothpaste method for using fluoride toothpaste more effectively. This study aimed to investigate the change in viscosity and fluoride intake into hydroxyapatite of a toothpaste, and deliverability of fluoride toothpaste to the interproximal site with the PTD technique using an interproximal model. METHODS: Eight toothpaste samples were prepared at the following concentrations: ×1.00, ×1.25, ×1.50, ×1.75, ×2.00, ×3.00, ×4.00, and ×5.00. Viscosity of the toothpaste was measured by a Type-B viscometer. Dissolution rate of toothpaste and fluoride uptake into the hydroxy apatite pellet were analyzed by a fluoride selective electrode. Application paste volume and delivery rate was measured using interproximal model and image analysis software during using a finger brush front (FBF), finger brush back (FBB), and toothbrush. RESULTS: As the dilution ratio increased, the viscosity of the toothpaste decreased sharply, F uptake decreased, and dissolution rate increased. F uptake was significantly reduced when the toothpaste was diluted more than 1.75 times. Therefore, in order to improve the effectiveness of the fluoride toothpaste, it is important to deliver the toothpaste to interproximal areas and pit clefts at low dilution. It was observed that PTD technique can be effectively implemented by the finger brush. CONCLUSIONS: The use of a FBF surface in the analysis of an acrylic interproximal model could aid in applying pressure while blocking the space of the groove and preventing outflow of the toothpaste. It was considered that the PTD technique would improve the effects of the fluoride toothpaste, especially in the interproximal site.

In situ fluoride retention and remineralization of incipient carious lesions after the application of different concentrations of fluoride.

Limited information is available on the time-dependent or dosage-dependent cariostatic efficacy of highly concentrated fluoride compounds. This good clinical practice-conforming, double-blind, placebo-controlled, crossover in situ study tested the hypothesis that a 1.0% amine fluoride fluid is superior to a 0.5% amine fluoride fluid regarding fluoride retention and mineral change in initial caries enamel lesions over a period of 28 d. Fluoride retention was significantly higher after application of the two fluoride fluids compared with placebo but had decreased in both groups to similar levels after only 1 wk. Mineral gain was significantly higher for both verum groups compared with placebo. The use of 1% fluoride fluid resulted in significantly higher remineralization compared with the use of 0.5% fluoride fluid. For both fluoride fluids mineral gain followed a linear relationship with time during the experimental period, indicating a possible further uptake of mineral, even after 4 wk.

Randomized equivalence trial of intensive and semiannual applications of fluoride varnish in the primary dentition.

For children in the primary dentition with high caries prevalence the standard semiannual application of fluoride varnish may not be successful in preventing tooth decay. Oftentimes this population is mobile and does not receive consistent preventive care. This trial tested whether an intensive fluoride 5% sodium varnish regimen (three applications/2 weeks) applied annually has an equivalent effect on caries progression in the primary dentition compared to single applications applied semiannually. This study was a randomized clinical trial with two treatment groups. All participants (n = 600; mean age +/- SD = 55.3 +/- 4.6 months) received three varnish applications (active varnish or placebo) at semiannual visits over 3 years. Once per year the intensive-treatment group received one set of three active treatments and three placebo treatments 6 months later, each time within 2 weeks. The standard group received one active and two placebo treatments every 6 months. Children were assessed clinically at baseline and 12, 24 and 36 months after the initiation of the study. The mean (SD) numbers of newly decayed primary tooth surfaces observed over 3 years were 9.8 (8.6) and 7.4 (7.7) in the intensive and standard groups, respectively. The adjusted rate ratio was 1.13 (95% CI = 0.94-1.37, p = 0.20). In conclusion, the trial failed to demonstrate clear evidence of a difference in efficacy. However, differences of up to 36% greater rates of caries in the intensive group could not be ruled out, thus equivalence of the treatments cannot be concluded.

Effects of flossing and rinsing with a fluoridated mouthwash after brushing with a fluoridated toothpaste on salivary fluoride clearance.

The aims of this study were to test the hypothesis that flossing after brushing with a fluoridated toothpaste may lower salivary fluoride (F), and to evaluate the consequence of subsequent F mouthwash use. Twenty adults used 3 oral hygiene regimes in a randomised order: A, brushing with an NaF toothpaste; B, as A but followed by professional flossing; C, as B followed by rinsing with an NaF mouthwash. Saliva samples were collected up to 120 min after each regime and analysed for F. The mean area under the clearance curve value for regime C was statistically significantly greater than the corresponding values for A and B (p < 0.0001), which differed little. The regime that included the mouthwash may provide better anticaries protection.

Effect of rinsing with mouthwashes after brushing with a fluoridated toothpaste on salivary fluoride concentration.

The aim of the study was to determine whether rinsing with a mouthwash after brushing with a fluoridated toothpaste affected oral fluoride (F) retention and clearance compared with an oral hygiene regime without mouthwash. In this supervised, single-blind study, 3 regimes were compared: (A) brushing for 1 min with 1 g of 1,450 microg F/g NaF toothpaste followed by rinsing for 5 s with 10 ml water; (B) as A but followed by rinsing for 30 s with 20 ml of 100 mg F/l NaF mouthwash, and (C) as B but rinsing for 30 s with a non-fluoridated mouthwash. Twenty-three adults applied each treatment once in a randomised order, separated by 1-week washout periods, and used a non-fluoridated toothpaste at home prior to and during the study. Whole saliva samples (2 ml), collected before each treatment commenced and 10, 20, 30, 60, 90 and 120 min afterwards, were subsequently analysed for fluoride by ion-specific electrode. The mean (SD) back-transformed log (area under salivary F clearance curve) values were: A = 2.36 (+3.37, -1.39), B = 2.54 (+2.72, -1.31) and C = 1.19 (+1.10, -0.57) mmol F/l x min, respectively. The values for regimes A and B were statistically significantly greater than that for regime C (p < 0.001; paired t test). These findings suggest that use of a non-F mouthwash after toothbrushing with a F toothpaste may reduce the anticaries protection provided by toothbrushing with a F toothpaste alone. The use of a mouthwash with at least 100 mg F/l should minimise this risk.

Fluoride uptake by plaque from water and from dentifrice.

It has been suggested that fluoride retention in plaque is limited by available binding sites. We determined the effects of fluoridated or placebo dentifrices on plaque and salivary fluoride concentrations [F]s in communities with different water fluoride concentrations (0.04, 0.85, 3.5 ppm). After one week of dentifrice use, samples were collected 1.0 and 12 hrs after the last use of dentifrices. After the use of fluoridated dentifrice, plaque fluoride concentrations were higher at both times, except at 12 hrs in the 3.5-ppm community. Plaque concentrations at 1.0 hr after the use of fluoridated dentifrice increased almost constantly (6.5 mmol/kg), but then decreased approximately 50% at 12 hrs in each community. Unlike previous studies, the present findings suggest that the use of fluoridated dentifrice is likely to increase plaque fluoride concentrations significantly for up to 12 hrs in areas where the water contains fluoride close to 1.0 ppm. As previously reported, plaque fluoride concentrations were directly related to calcium concentrations.

Ca pre-rinse greatly increases plaque and plaque fluid F.

Previous studies demonstrated that a Ca pre-treatment greatly increases salivary F from a subsequent NaF rinse. This study examines if these increases are found in plaque and plaque fluid F. Thirteen individuals accumulated plaque before rinsing with: (1) 12 mmol/L NaF (228 microg/g F), (2) 150 mmol/L Ca rinse, or (3) the Ca rinse followed by the F rinse. One hr later, plaque samples were collected, the plaque fluid was recovered, and the plaque residues were extracted 5 times with pH 6.8 or pH 4.8 buffers, and then by acid. The F in each extract after the Ca rinse/F rinse greatly exceeded the corresponding F from the NaF rinse. Consequently, the Ca rinse/F rinse increased the total plaque F and the plaque fluid F by 12x and 5x, compared with the NaF rinse alone. These and the previous salivary results suggest that a Ca pre-treatment may increase the cariostatic effects of topical F agents.