The Changing Landscape of Treatment for Intracranial Aneurysm.

There has been a significant transformation in the treatment of intracranial aneurysms (IAs) over the past century, with the most pivotal changes occurring in the past three decades. To characterize this evolution, we assessed the number of articles published on various procedures for the treatment of IA as a measure of their interest and usage over time. We separated our analysis into two main areas: surgical and endovascular approaches. We further subdivided these two main categories into clipping and bypass for surgery, and coiling, flow diversion, and liquid material embolization for endovascular approaches. We found 5956 publications on open surgical approaches in the 70-year period from 1947 to 2017, with papers on clipping (n = 4204), being the most common. We found 8602 endovascular publications beginning in 1964, with most of the activity taking place in the late 1990s and beyond. Coiling had the most publications of the endovascular approaches (n = 5436). In 1999, the number of annual publications on endovascular treatments surpassed those of open surgery, signaling a crossover point in the IA literature. The same trend continues to this date.

Analysis of cerebrovascular aneurysm treatment cost: retrospective cohort comparison of clipping, coiling, and flow diversion.

OBJECTIVE With the continuous rise of health care costs, hospitals and health care providers must find ways to reduce costs while maintaining high-quality care. Comparing surgical and endovascular treatment of intracranial aneurysms may offer direction in reducing health care costs. The Value-Driven Outcomes (VDO) database at the University of Utah identifies cost drivers and tracks changes over time. In this study, the authors evaluate specific cost drivers for surgical clipping and endovascular management (i.e., coil embolization and flow diversion) of both ruptured and unruptured intracranial aneurysms using the VDO system. METHODS The authors retrospectively reviewed surgical and endovascular treatment of ruptured and unruptured intracranial aneurysms from July 2011 to January 2017. Total cost (as a percentage of each patient's cost to the system), subcategory costs, and potential cost drivers were evaluated and analyzed. RESULTS A total of 514 aneurysms in 469 patients were treated; 273 aneurysms were surgically clipped, 102 were repaired with coiling, and 139 were addressed with flow diverter placements. Middle cerebral artery aneurysms accounted for the largest portion of cases in the clipping group (29.7%), whereas anterior communicating artery aneurysms were most frequently involved in the coiling group (30.4%) and internal carotid artery aneurysms were the majority in the flow diverter group (63.3%). Coiling (mean total cost 0.25% ± 0.20%) had a higher cost than flow diversion (mean 0.20% ± 0.16%) and clipping (mean 0.17 ± 0.14%; p = 0.0001, 1-way ANOVA). Coiling cases cost 1.5 times as much as clipping and flow diversion costs 1.2 times as much as clipping. Facility costs were the most significant contributor to intracranial clipping costs (60.2%), followed by supplies (18.3%). Supplies were the greatest cost contributor to coiling costs (43.2%), followed by facility (40.0%); similarly, supplies were the greatest portion of costs in flow diversion (57.5%), followed by facility (28.5%). Cost differences for aneurysm location, rupture status, American Society of Anesthesiologists (ASA) grade, and discharge disposition could be identified, with variability depending on surgical procedure. A multivariate analysis showed that rupture status, surgical procedure type, ASA status, discharge disposition, and year of surgery all significantly affected cost (p < 0.0001). CONCLUSIONS Facility utilization and supplies constitute the majority of total costs in aneurysm treatment strategies, but significant variation exists depending on surgical approach, rupture status, and patient discharge disposition. Developing and implementing approaches and protocols to improve resource utilization are important in reducing costs while maintaining high-quality patient care.

Unruptured aneurysms in the elderly: perioperative outcomes and cost analysis of endovascular coiling and surgical clipping.

OBJECTIVE Observation and neurosurgical intervention for unruptured intracranial aneurysms (UIAs) in the elderly population is rapidly increasing. Cerebral aneurysm coiling (CACo) is favored over cerebral aneurysm clipping (CAC) in elderly patients, yet some elderly individuals still undergo CAC. The cost-effectiveness of treating UIAs requires further exploration. Understanding the effect of intervention on hospital charges and length of stay (LOS) as well as perioperative mortality and complications can further shed light on its economic impact. The purpose of this study was to analyze the cost and perioperative outcomes of UIAs in elderly patients (≥ 65 years of age) after CACo or CAC intervention. METHODS Retrospective cohorts of CACo and CAC admissions were extracted from National (Nationwide) Inpatient Sample data obtained between 2002 and 2013, forming parallel intervention groups to compare the following outcomes between elderly and nonelderly patients: average LOS and mean hospital admission costs, in-hospital mortality, and complications. Covariates included sex, race or ethnicity, and comorbidities. RESULTS Elderly patients undergoing CAC experienced an average LOS of 8.0 days, whereas elderly patients undergoing CACo stayed an average of 3.2 days. The mean hospital charges incurred during admission totaled $95,960 in the elderly patients who underwent CAC versus $87,960 in the ones who underwent CACo. Elderly patients in whom CAC was performed had a 2.2% rate of in-hospital mortality, with a 2.6 greater adjusted odds of in-hospital mortality than nonelderly patients treated with CAC. In contrast, elderly patients who underwent CACo had a 1.36 greater adjusted odds of in-hospital mortality than their nonelderly counterparts. Compared to nonelderly patients receiving both interventions, elderly individuals had a significantly higher prevalence of various comorbidities and incidence of complications. Elderly patients who received CAC experienced a 10.3% incidence rate of perioperative stroke, whereas their CACo counterparts experienced this complication at a rate of 3.5%. Elderly patients treated with CAC had greater odds of perioperative acute renal failure, whereas their CACo counterparts had greater odds of perioperative deep venous thrombosis and pulmonary embolism. CONCLUSIONS Intervention with CAC and CACo in the elderly is resource intensive and is associated with higher risk than in the nonelderly. Those deciding between intervention and conservative management should consider these risks and costs, especially the 2.2% postoperative mortality rate associated with CAC in the elderly population. Further comparative cost-effectiveness research is needed to weigh these costs and outcomes against those of conservative management.

Wang's Forceps-Assisted Catheter Reposition and Fixation: An Easy and Reliable Rescue Method.

Catheter migration and omental wrap are the most common causes of catheter malfunction, which usually result in catheter removal or replacement. The conventional open surgery for catheter reposition has many disadvantages. A new tunnel is needed throughout the procedure of catheter replacement causing more pain and frustration to the patients. Another drawback is that the incidence of catheter migration after conventional catheter reposition surgery is still as high as it was before the procedure. Wang's forceps, an instrument commonly used in our peritoneal dialysis center, is easy and effective in catheter insertion and fixation. Recently, we have successfully used the Wang's forceps to resolve the catheter displacement for 10 patients, including 1 patient who suffered from catheter tip migration 3 times and had undergone conventional catheter rescue by both open surgery and laparoscopy. This new technique was easy and reliable, and the original tunnel was maintained, which reduced pain and risk of infection in the patients. These advantages may grant the Wang's forceps technique favorable over the conventional surgical approach.

The role of technology in minimally invasive surgery: state of the art, recent developments and future directions.

The diffusion of minimally invasive surgery has thrived in recent years, providing substantial benefits over traditional techniques for a number of surgical interventions. This rapid growth has been possible due to significant advancements in medical technology, which partly solved some of the technical and clinical challenges associated with minimally invasive techniques. The issues that still limit its widespread adoption for some applications include the limited field of view; reduced manoeuvrability of the tools; lack of haptic feedback; loss of depth perception; extended learning curve; prolonged operative times and higher financial costs. The present review discusses some of the main recent technological advancements that fuelled the uptake of minimally invasive surgery, focussing especially on the areas of imaging, instrumentation, cameras and robotics. The current limitations of state-of-the-art technology are identified and addressed, proposing future research directions necessary to overcome them.

Validation of Reverse-Engineered and Additive-Manufactured Microsurgical Instrument Prototype.

With advancements in imaging techniques, neurosurgical procedures are becoming highly precise and minimally invasive, thus demanding development of new ergonomically aesthetic instruments. Conventionally, neurosurgical instruments are manufactured using subtractive manufacturing methods. Such a process is complex, time-consuming, and impractical for prototype development and validation of new designs. Therefore, an alternative design process has been used utilizing blue light scanning, computer-aided designing, and additive manufacturing direct metal laser sintering (DMLS) for microsurgical instrument prototype development. Deviations of DMLS-fabricated instrument were studied by superimposing scan data of fabricated instrument with the computer-aided designing model. Content and concurrent validity of the fabricated prototypes was done by a group of 15 neurosurgeons by performing sciatic nerve anastomosis in small laboratory animals. Comparative scoring was obtained for the control and study instrument. T test was applied to the individual parameters and P values for force (P < .0001) and surface roughness (P < .01) were found to be statistically significant. These 2 parameters were further analyzed using objective measures. Results depicts that additive manufacturing by DMLS provides an effective method for prototype development. However, direct application of these additive-manufactured instruments in the operating room requires further validation.

Three-dimensional printing surgical instruments: are we there yet?

BACKGROUND: The applications for rapid prototyping have expanded dramatically over the last 20 y. In recent years, additive manufacturing has been intensely investigated for surgical implants, tissue scaffolds, and organs. There is, however, scant literature to date that has investigated the viability of three-dimensional (3D) printing of surgical instruments. MATERIALS AND METHODS: Using a fused deposition modeling printer, an Army/Navy surgical retractor was replicated from polylactic acid (PLA) filament. The retractor was sterilized using standard Food and Drug Administration approved glutaraldehyde protocols, tested for bacteria by polymerase chain reaction, and stressed until fracture to determine if the printed instrument could tolerate force beyond the demands of an operating room (OR). RESULTS: Printing required roughly 90 min. The instrument tolerated 13.6 kg of tangential force before failure, both before and after exposure to the sterilant. Freshly extruded PLA from the printer was sterile and produced no polymerase chain reaction product. Each instrument weighed 16 g and required only $0.46 of PLA. CONCLUSIONS: Our estimates place the cost per unit of a 3D-printed retractor to be roughly 1/10th the cost of a stainless steel instrument. The PLA Army/Navy retractor is strong enough for the demands of the OR. Freshly extruded PLA in a clean environment, such as an OR, would produce a sterile ready-to-use instrument. Because of the unprecedented accessibility of 3D printing technology world wide and the cost efficiency of these instruments, there are far reaching implications for surgery in some underserved and less developed parts of the world.

[Characteristics of customized device for video-assisted thoracoscopic surgery].

Video-assisted thoracoscopic surgery (VATS) has been a mainstay in surgical interventions for an early staged lung cancer over a decade. VATS procedures are nowadays categorized into 2 groups. One is a modified open procedures through a mini-thoracotomy with customization of conventional instruments. The other is a port-access procedure with use of newly developed instruments for endoscopic surgery. The optimal device adapting for individual surgical manipulations should be selected to make a VATS procedure safer and more feasible. The sample extraction using a bag is a most important step when VATS is completed, because the rupture of bag can result in cancer cell contamination. More useful devices adapting either for mini-thoracotomy VATS or for port-access VATS, will be developed with advancement of medical technology.

Toward increased autonomy in the surgical OR: needs, requests, and expectations.

BACKGROUND: The current trend in surgery toward further trauma reduction inevitably leads to increased technological complexity. It must be assumed that this situation will not stay under the sole control of surgeons; mechanical systems will assist them. Certain segments of the work flow will likely have to be taken over by a machine in an automatized or autonomous mode. METHODS: In addition to the analysis of our own surgical practice, a literature search of the Medline database was performed to identify important aspects, methods, and technologies for increased operating room (OR) autonomy. RESULTS: Robotic surgical systems can help to increase OR autonomy by camera control, application of intelligent instruments, and even accomplishment of automated surgical procedures. However, the important step from simple task execution to autonomous decision making is difficult to realize. Another important aspect is the adaption of the general technical OR environment. This includes adaptive OR setting and context-adaptive interfaces, automated tool arrangement, and optimal visualization. Finally, integration of peri- and intraoperative data consisting of electronic patient record, OR documentation and logistics, medical imaging, and patient surveillance data could increase autonomy. CONCLUSIONS: To gain autonomy in the OR, a variety of assistance systems and methodologies need to be incorporated that endorse the surgeon autonomously as a first step toward the vision of cognitive surgery. Thus, we require establishment of model-based surgery and integration of procedural tasks. Structured knowledge is therefore indispensable.

Use of the vessel sealing system in tracheostomy.

BACKGROUND: Tracheostomy is a frequent, and at times semiurgent, surgical procedure. It is performed in close proximity to the thyroid gland, and in many cases requires division of its isthmus, putting a patient in danger of significant bleeding. OBJECTIVES: To examine prospectively the feasibility of vessel sealing in tracheostomy. METHODS: A vessel-seating device was used in 24 consecutive patients undergoing tracheostomy. There were no exclusion criteria for enrolling the patients. No other hemostatic technique was used for dividing the isthmus. RESULTS: There were no bleeding events throughout the postoperative period. The operating time saving was 5-10 minutes. CONCLUSIONS: Use of the vessel sealer was found to be straightforward, efficacious, rapid and safe.

Outcome of access sphincterotomy using a needle knife converted from a standard biliary sphincterotome.

Cannulation fails in up to 10 % of all endoscopic retrograde cholangiopancreatographies (ERCPs). A standard sphincterotome can be converted to a needle knife to perform precut sphincterotomy (PCS). In this retrospective study, we analyzed cannulation rates, adverse events, and the percentage of patients requiring a second sphincterotome using a converted needle knife. Over a 7-year period, 3322 ERCPs were performed by one experienced therapeutic endoscopist; 1487 sphincterotomies were performed, 78 precut sphincterotomies using a converted needle knife. Successful cannulation using the converted needle knife was achieved in 96 % of cases at the initial procedure. Adverse events occurred in 17 % and post-ERCP pancreatitis was reported in 10 % of patients. A second sphincterotome was needed in 13 % of cases. This study shows a converted needle knife can be used for successful cannulation of either the biliary or the pancreatic duct after a failed cannulation with a standard sphincterotome, with a low percentage of adverse events anda reduction in the need for accessories.

The over-the-scope clip system--a novel technique for gastrocutaneous fistula closure: the first North American experience.

BACKGROUND: The mainstay of therapy for gastrocutaneous (GC) fistulas has been surgical intervention. However, endoclips are currently used for management of perforations and fistulas but are limited by their ability to entrap and hold the tissue. OBJECTIVE: To report the first North American experience with a commercially available over-the-scope clip (OTSC) device, a novel and new tool for the endoscopic entrapment of tissue for the closure of fistula and perforations. METHODS: The present single-centre study was conducted at a tertiary referral academic gastroenterology unit and centre for advanced therapeutic endoscopy and involved patients referred for endoscopic treatment for the closure of a GC fistula. The OTSC device was mounted on the tip of the endoscope and passed into the stomach to the level of the fistula. The targeted site of the fistula was grasped with the tissue anchoring tripod and pulled into the cap with concomitant scope channel suction. Once the tissue was trapped in the cap, a 'bear claw' clip was deployed. RESULTS: The patients recovered with fistula closure. No complication or recurrence was noted. Fistula sizes >1 cm, however, were difficult to close with the OTSC system. The length of stay of the bear claw clip at the fistula site is unpredictable, which may lead to incomplete closure of the fistula. CONCLUSION: Closure of a GC fistula using a novel 'bear claw' clip system is feasible and safe.

Aneurysm treatment in Europe 2010: an internet survey.

BACKGROUND: Aneurysm (AN) treatment appears to differ from country to country and even from centre to centre. Therefore we decided to conduct a survey in order to better understand the "state of the art" in aneurysm treatment in Europe. The primary aim was to understand the roles of clipping and coiling in aneurysm treatment. METHODS: An interactive form was sent to major European neurosurgical centres. The responses relating to AN location, status (ruptured/unruptured) and treatment modality were divided with regard to the volume of cases and the centre's geographical location. RESULTS: Responses were received from 96 European centres. The main finding was that clipping was used significantly more often in Eastern Europe than in the rest of Europe to treat ruptured ANs of the anterior circulation. Almost all ruptured ANs across all locations are treated actively. The treatment of unruptured aneurysms of the anterior circulation is similar. The median relating to observed unruptured ANs across the Europe was 10 %. Posterior circulation ANs are treated predominantly by coiling, regardless of aneurysm status or geographical location. The average number of coilers versus surgeons per centre was 2.5:3.0 in Western, 1.9:3.6 in Southern, 1.9:4.3 in Eastern and 2.7:3.1 in Northern Europe. CONCLUSIONS: The way in which intracranial aneurysms are treated appears to correlate with the economic development of European countries. It is probably also affected by the lack of experienced coilers in Eastern Europe.

Comparison of powered Spine Shaver and conventional discectomy for TLIF: a randomized cadaver specimens study.

STUDY DESIGN: Randomized, technical study in 7 samples from 2 cadavers. OBJECTIVES: To compare transforaminal lumbar discectomies performed by 2 experienced surgeons using either the conventional technique or the new powered Spine Shaver (SS) instrument. SUMMARY OF BACKGROUND DATA: The SS was designed to offer an easier and safer procedure than the conventional technique. METHODS: The 7 samples were randomly operated by the 2 surgeons. The conventional or SS techniques were randomly selected. The endplate cartilage was removed and photographed. The amounts of cartilage removed were measured through computer-based analysis software. RESULTS: The number of instrument insertions was nearly 6-fold more frequent with the conventional technique (56.4) than with the SS (12.3). The volume of disk removed was approximately 50% higher with the SS (6.525 cm) than with the conventional technique (4.333 cm). The areas of cartilages removed were higher using the SS (2.297 cm) than with the conventional technique (2.1 cm). The endplate damages were 0.1 and 0.3 cm for the SS and conventional techniques, respectively. CONCLUSIONS: The SS allows a better quality of preparation, and minimizes the risks of damaging surrounding structures related to multiple movements of manual tools.

New technology and applied research: what the future holds for LESS and NOTES.

Rapid technological developments in the 1970's contributed to the emergence of operative laparoscopy as a revolution in surgery. In recent years, there has been a surge of interest in laparoendoscopic single-site (LESS) and natural orifice translumenal endoscopic surgery (NOTES), novel techniques that have the potential to further minimize the invasiveness and morbidity of surgery. Innovations in instrument design and in novel surgical platforms including robotic technology have rapidly been developed in an effort to enhance the future clinical applicability of these techniques. In this chapter, we review the current status and future directions of LESS and NOTES technology, focusing on the current research in the field.

[Application of a device for determination of the transplant length during operation of the aorta-coronary bypass].

Determination of the necessary length of the bypass is one of the principal stages of operation of the aorta-coronary bypass. The greatest difficulty of the determination of the bypass length is the first-priority applying of proximal anastomoses. It requires the surgeon to have great experience, the operation to be longer. It also makes it necessary to prepare a conduit of deliberately excessive length. A device is proposed for the determination of the necessary bypass length during operation of aorta-coronary bypass consisting of a crocodile grip with a fixed to it polymer tube.

[The methods for the treatment of combined nasal deformities].

The objective of this study was to improve the cosmetic outcome of the surgical treatment of combined nasal deformities performed by the author using the rhinoplastic technique in 144 patients presenting with this condition during the period from 2006 to 2010. The patients of the main (study) group underwent the surgical intervention with the use of improved technologies proposed by the author and special instruments developed for the purpose. The patients of the control group were treated by standard surgical techniques. A statistically significant decrease of the relative frequency (percentage) of secondary nasal deformities was documented in the study group compared with the control one (from 6.94% to 2.78%). It is concluded that the technologies of rhinoplastic interventions described in the present publication can be recommended for the use in the practical work of otorhinolaryngologists and plastic surgeons.