Economic analysis and drying kinetics of a geothermal-assisted solar dryer for tomato paste drying.

BACKGROUND: The economic value of many fruit and vegetables is often linked to the ability to preserve such natural products. In the case of tomatoes, the manufacture of 1 kg of powder or concentrate requires the evaporation of about 16 kg water kg-1 dry matter. In the present work, the effectiveness and economic analysis of solar drying systems for drying of tomato paste with and without geothermal water heat exchanger (GWHE) were studied. RESULTS: The GWHE integration significantly increased the recorded drying temperature up to 53.41 °C, with an improvement of 11.5 °C compared to the conventional dryer. Moreover, the drying temperature inside the drying chamber exceeded ambient temperature after sunset and at night by 30.8 °C. GWHE ensured a continuous drying process, while drying time was 22 consecutive hours, compared to the basic dryer with 18 h in 3 days. Effective moisture diffusivity was found to be 1.617 × 10-9 and 1.202 × 10-9  m2  s-1 for hybrid and basic drying systems, respectively, using the slope. Three methods were used to perform economic analysis. The cumulative present worth of savings, at 23 382.6 USD, is much higher than the capital cost of the hybrid dryer, at 467 USD. The payback period is quite acceptable, at 2.21 years as compared to dryer lifetime of 15 years. Therefore, the hybrid dryer will dry tomato paste without additional charges for 12.79 years and is recommended for a large-scale tomato paste dryer. CONCLUSION: The hybrid system with GWHE ensures a continuous drying process during night-time, in addition to reduced drying time. The economic study revealed a high feasibility for the hybrid dryer, with a short payback period. © 2021 Society of Chemical Industry.

Energy issues in microwave food processing: A review of developments and the enabling potentials of solid-state power delivery.

The enormous magnitude and variety of microwave applications in household, commercial and industrial food processing creates a strong motivation for improving the energy efficiency and hence, sustainability of the process. This review critically assesses key energy issues associated with microwave food processing, focusing on previous energy performance studies, energy performance metrics, standards and regulations. Factors affecting energy-efficiency are categorised into source, load and source-load matching factors. This highlights the need for highly-flexible and controllable power sources capable of receiving real-time feedback on load properties, and effecting rapid control actions to minimise reflections, heating non-uniformities and other imperfections that lead to energy losses. A case is made for the use of solid-state amplifiers as alternatives to conventional power sources, magnetrons. By a full-scale techno-economic analysis, including energy aspects, it is shown that the use of solid-state amplifiers as replacements to magnetrons is promising, not only from an energy and overall technical perspective, but also in terms of economics.

Recent developments in high efficient freeze-drying of fruits and vegetables assisted by microwave: A review.

Microwave heating has been applied in the drying of high-value solids as it affords a number of advantages, including shorter drying time and better product quality. Freeze-drying at cryogenic temperature and extremely low pressure provides the advantage of high product quality, but at very high capital and operating costs due partly to very long drying time. Freeze-drying coupled with a microwave heat source speeds up the drying rate and yields good quality products provided the operating unit is designed and operated to achieve the potential for an absence of hot spot developments. This review is a survey of recent developments in the modeling and experimental results on microwave-assisted freeze-drying (MFD) over the past decade. Owing to the high costs involved, so far all applications are limited to small-scale operations for the drying of high-value foods such as fruits and vegetables. In order to promote industrial-scale applications for a broader range of products further research and development efforts are needed to offset the current limitations of the process. The needs and opportunities for future research and developments are outlined.

Cradle-to-grave carbon footprint of dried organic pasta: assessment and potential mitigation measures.

BACKGROUND: In several Environmental Product Declarations, the business-to-business carbon footprint (CFCDC ) of durum wheat semolina dried pasta ranged from 0.57 to 1.72 kg carbon dioxide equivalent (CO2e ) kg-1 . In this work, the business-to-consumer carbon footprint (CFCG ) of 1 kg of dry decorticated organic durum wheat semolina pasta, as packed in 0.5 kg polypropylene bags by a South Italian medium-sized pasta factory in the years 2016 and 2017, was assessed in compliance with the Publicly Available Specification 2050 standard method. RESULTS: Whereas CFCDC was mostly conditioned by the greenhouse gases emitted throughout durum wheat cultivation (0.67 vs 1.12 kg CO2e kg-1 ), CFCG was mainly dependent on the use and post-consume phases (0.68 vs 1.81 kg CO2e kg-1 ). CFCG was more or less affected by the pasta types and packing formats used, since it varied from +0.3 to +14.8% with respect to the minimum score estimated (1.74 kg CO2e kg-1 ), which corresponded to long goods packed in 3 kg bags for catering service. Once the main hotspots had been identified, CFCG was stepwise reduced by resorting to a series of mitigation actions. CONCLUSION: Use of more eco-sustainable cooking practices, organic durum wheat kernels resulting from less impacting cultivation techniques, and renewable resources to generate the thermal and electric energy needs reduced CFCG by about 58% with respect to the above reference case. Finally, by shifting from road to rail freight transport and shortening the supply logistics of dry pasta and grains, a further 5% reduction in CFCG was achieved. © 2019 Society of Chemical Industry.

Estimating the health and economic effects of the proposed US Food and Drug Administration voluntary sodium reformulation: Microsimulation cost-effectiveness analysis.

BACKGROUND: Sodium consumption is a modifiable risk factor for higher blood pressure (BP) and cardiovascular disease (CVD). The US Food and Drug Administration (FDA) has proposed voluntary sodium reduction goals targeting processed and commercially prepared foods. We aimed to quantify the potential health and economic impact of this policy. METHODS AND FINDINGS: We used a microsimulation approach of a close-to-reality synthetic population (US IMPACT Food Policy Model) to estimate CVD deaths and cases prevented or postponed, quality-adjusted life years (QALYs), and cost-effectiveness from 2017 to 2036 of 3 scenarios: (1) optimal, 100% compliance with 10-year reformulation targets; (2) modest, 50% compliance with 10-year reformulation targets; and (3) pessimistic, 100% compliance with 2-year reformulation targets, but with no further progress. We used the National Health and Nutrition Examination Survey and high-quality meta-analyses to inform model inputs. Costs included government costs to administer and monitor the policy, industry reformulation costs, and CVD-related healthcare, productivity, and informal care costs. Between 2017 and 2036, the optimal reformulation scenario achieving the FDA sodium reduction targets could prevent approximately 450,000 CVD cases (95% uncertainty interval: 240,000 to 740,000), gain approximately 2.1 million discounted QALYs (1.7 million to 2.4 million), and produce discounted cost savings (health savings minus policy costs) of approximately $41 billion ($14 billion to $81 billion). In the modest and pessimistic scenarios, health gains would be 1.1 million and 0.7 million QALYS, with savings of $19 billion and $12 billion, respectively. All the scenarios were estimated with more than 80% probability to be cost-effective (incremental cost/QALY < $100,000) by 2021 and to become cost-saving by 2031. Limitations include evaluating only diseases mediated through BP, while decreasing sodium consumption could have beneficial effects upon other health burdens such as gastric cancer. Further, the effect estimates in the model are based on interventional and prospective observational studies. They are therefore subject to biases and confounding that may have influenced also our model estimates. CONCLUSIONS: Implementing and achieving the FDA sodium reformulation targets could generate substantial health gains and net cost savings.

Seattle's minimum wage ordinance did not affect supermarket food prices by food processing category.

OBJECTIVE: To examine the impacts of Seattle's minimum wage ordinance on food prices by food processing category. DESIGN: Supermarket food prices were collected for 106 items using a University of Washington Center for Public Health Nutrition market basket at affected and unaffected supermarket chain stores at three times: March 2015 (1-month pre-policy enactment), May 2015 (1-month post-policy enactment) and May 2016 (1-year post-policy enactment). Food items were categorized into four food processing groups, from minimally to ultra-processed. Data were analysed across time using a multilevel, linear difference-in-differences model at the store and price level stratified by level of food processing. SETTING: Six large supermarket chain stores located in Seattle ('intervention') affected by the policy and six same-chain but unaffected stores in King County ('control'), Washington, USA. SUBJECTS: One hundred and six food and beverage items. RESULTS: The largest change in average price by food item was +$US 0·53 for 'processed foods' in King County between 1-month post-policy and 1-year post-policy enactment (P < 0·01). The smallest change was $US 0·00 for 'unprocessed or minimally processed foods' in Seattle between 1-month post-policy and 1-year post-policy enactment (P = 0·94). No significant changes in averaged chain prices were observed across food processing level strata in Seattle v. King County stores at 1-month or 1-year post-policy enactment. CONCLUSIONS: Supermarket food prices do not appear to be differentially impacted by Seattle's minimum wage ordinance by level of the food's processing. These results suggest that the early implementation of a city-level minimum wage policy does not alter supermarket food prices by level of food processing.

Consumers' willingness to pay for reprocessed fried chicken: A way of reducing uneaten food.

Substantial food loss and waste occur worldwide; approximately one third of produced food is lost or wasted annually, which worsens problems such as starvation and environmental degradation. This study examines the possibility of selling reprocessed meat products made from raw meat near its sell-by date, using Japanese fried chicken as an example. If reprocessed products are accepted by consumers, this will significantly contribute to reducing food waste in grocery stores. Because reprocessing does not require a reduction in current meat consumption, selling reprocessed foods is a more feasible and realistic way to reduce food waste compared to other initiatives, such as "Meat Free Monday." We use a choice experiment to elicit consumer preference for reprocessed fried chicken. Our results show that the willingness to pay for reprocessed fried chicken is above 90% of that of regular chicken, which implies a high feasibility of selling such products.

How effective are common household preparations on removing pesticide residues from fruit and vegetables? A review.

Nowadays, the use of pesticides is inevitable for pest control in crops, especially for fruit and vegetables. After the harvest from raw agricultural commodities, the amount of pesticide residues in food is mainly influenced by the storage, handling and processing that follow. If good agricultural and good manufacturing practices are enforced effectively, the amount of pesticide residues would be brought below the corresponding maximum residue level. Thus, the consumption of raw and/or prepared fruit and vegetables would be safe. Nonetheless, reports regarding pesticide residues in fruit or vegetables on mass media have been worrying consumers, who are concerned about the adverse effects of pesticide residues. As a result, consumers perform household processing before consumption to reduce any related risks. However, can these preparations effectively remove pesticide residues? Reviewing the extensive literature, it showed that, in most cases, washing and soaking can only lead to a certain degree of reduction in residue level, while other processing such as peeling, soaking in chemical baths and blanching can reduce pesticide residues more effectively. In general, the behaviour of residues during processing can be rationalised in terms of the physico-chemical properties of the pesticide and the nature of the process. In contrast, the reported studies are diversified and some areas still lack sufficient studies to draw any remarks. Recommendations are provided with respect to the available information that aims to formulate an environmental friendly, cost-effective and efficient household processing of fruit and vegetables to reduce pesticide residues. © 2017 Society of Chemical Industry.

Ultra-processed foods have the worst nutrient profile, yet they are the most available packaged products in a sample of New Zealand supermarkets.

OBJECTIVE: To examine the availability of packaged food products in New Zealand supermarkets by level of industrial processing, nutrient profiling score (NPSC), price (energy, unit and serving costs) and brand variety. DESIGN: Secondary analysis of cross-sectional survey data on packaged supermarket food and non-alcoholic beverages. Products were classified according to level of industrial processing (minimally, culinary and ultra-processed) and their NPSC. SETTING: Packaged foods available in four major supermarkets in Auckland, New Zealand. SUBJECTS: Packaged supermarket food products for the years 2011 and 2013. RESULTS: The majority (84% in 2011 and 83% in 2013) of packaged foods were classified as ultra-processed. A significant positive association was found between the level of industrial processing and NPSC, i.e., ultra-processed foods had a worse nutrient profile (NPSC=11.63) than culinary processed foods (NPSC=7.95), which in turn had a worse nutrient profile than minimally processed foods (NPSC=3.27), P<0.001. No clear associations were observed between the three price measures and level of processing. The study observed many variations of virtually the same product. The ten largest food manufacturers produced 35% of all packaged foods available. CONCLUSIONS: In New Zealand supermarkets, ultra-processed foods comprise the largest proportion of packaged foods and are less healthy than less processed foods. The lack of significant price difference between ultra- and less processed foods suggests ultra-processed foods might provide time-poor consumers with more value for money. These findings highlight the need to improve the supermarket food supply by reducing numbers of ultra-processed foods and by reformulating products to improve their nutritional profile.

Consumer evaluation of food with nutritional benefits: a systematic review and narrative synthesis.

As a consequence of the growing interest in, and development of, various types of food with nutritional benefits, the modern consumer views their kitchen cabinet more and more as a medicine cabinet. Given that consumer evaluation of food is considered key to the successful production, marketing and finally consumption of food, a procedure commonly used in medical fields was employed to systematically review and summarize evidence of consumer evaluation studies on nutritious foods. The focus is primarily on consumer understanding of nutritious food and the underlying determinants of consumer evaluation. Our results highlight four groups of key determinants: (1) nutrition knowledge and information; (2) attitudes, beliefs, perceptions and behavioural determinants; (3) price, process and product characteristics; and (4) socio-demographics. The findings also point to the importance of understanding consumer acceptance as one many concepts in the consumer evaluation process, and provide support for developing appropriate strategies for improving health and well-being of consumers.

Therapeutic and nutraceutical potential of bioactive compounds extracted from fruit residues.

The growing interest in the substitution of synthetic food antioxidants by natural ones has fostered research in identifying new low-cost antioxidants having commercial potential. Fruits such as mango, banana, and those belonging to the citrus family leave behind a substantial amount of residues in the form of peels, pulp, seeds, and stones. Due to lack of infrastructure to handle a huge quantity of available biomass, lack of processing facilities, and high processing cost, these residues represent a major disposal problem, especially in developing countries. Because of the presence of phenolic compounds, which impart nutraceutical properties to fruit residues, such residues hold tremendous potential in food, pharmaceutical, and cosmetic industries. The biological properties such as anticarcinogenicity, antimutagenicity, antiallergenicity, and antiageing activity have been reported for both natural as well as synthetic antioxidants. Special attention is focused on extraction of bioactive compounds from inexpensive or residual sources. The purpose of this review is to characterize different phenolics present in the fruit residues, discuss the antioxidant potential of such residues and the assays used in determination of antioxidant properties, discuss various methods for efficient extraction of the bioactive compounds, and highlight the importance of fruit residues as potential nutraceutical resources and biopreservatives.

Supermarket revolution in Asia and emerging development strategies to include small farmers.

A "supermarket revolution" has occurred in developing countries in the past 2 decades. We focus on three specific issues that reflect the impact of this revolution, particularly in Asia: continuity in transformation, innovation in transformation, and unique development strategies. First, the record shows that the rapid growth observed in the early 2000s in China, Indonesia, Malaysia, and Thailand has continued, and the "newcomers"--India and Vietnam--have grown even faster. Although foreign direct investment has been important, the roles of domestic conglomerates and even state investment have been significant and unique. Second, Asia's supermarket revolution has exhibited unique pathways of retail diffusion and procurement system change. There has been "precocious" penetration of rural towns by rural supermarkets and rural business hubs, emergence of penetration of fresh produce retail that took much longer to initiate in other regions, and emergence of Asian retail developing-country multinational chains. In procurement, a symbiosis between modern retail and the emerging and consolidating modern food processing and logistics sectors has arisen. Third, several approaches are being tried to link small farmers to supermarkets. Some are unique to Asia, for example assembling into a "hub" or "platform" or "park" the various companies and services that link farmers to modern markets. Other approaches relatively new to Asia are found elsewhere, especially in Latin America, including "bringing modern markets to farmers" by establishing collection centers and multipronged collection cum service provision arrangements, and forming market cooperatives and farmer companies to help small farmers access supermarkets.

A decision-making tool to determine economic feasibility and break-even prices for artisan cheese operations.

Artisan cheese makers lack access to valid economic data to help them evaluate business opportunities and make important business decisions such as determining cheese pricing structure. The objective of this study was to utilize an economic model to evaluate the net present value (NPV), internal rate of return, and payback period for artisan cheese production at different annual production volumes. The model was also used to determine the minimum retail price necessary to ensure positive NPV for 5 different cheese types produced at 4 different production volumes. Milk type, cheese yield, and aging time all affected variable costs. However, aged cheeses required additional investment for aging space (which needs to be larger for longer aging times), as did lower yield cheeses (by requiring larger-volume equipment for pasteurization and milk handling). As the volume of milk required increased, switching from vat pasteurization to high-temperature, short-time pasteurization was necessary for low-yield cheeses before being required for high-yield cheeses, which causes an additional increase in investment costs. Because of these differences, high-moisture, fresh cow milk cheeses can be sold for about half the price of hard, aged goat milk cheeses at the largest production volume or for about two-thirds the price at the lowest production volume examined. For example, for the given model assumptions, at an annual production of 13,608kg of cheese (30,000 lb), a fresh cow milk mozzarella should be sold at a minimum retail price of $27.29/kg ($12.38/lb), whereas a goat milk Gouda needs a minimum retail price of $49.54/kg ($22.47/lb). Artisan cheese makers should carefully evaluate annual production volumes. Although larger production volumes decrease average fixed cost and improve production efficiency, production can reach volumes where it becomes necessary to sell through distributors. Because distributors might pay as little as 35% of retail price, the retail price needs to be higher to compensate. An artisan cheese company that has not achieved the recognition needed to achieve a premium price may not find distribution through distributors profitable.

Aligning food-processing policies to promote healthier fat consumption in India.

India is undergoing a shift in consumption from traditional foods to processed foods high in sugar, salt and fat. Partially hydrogenated vegetable oils (PHVOs) high in trans-fat are often used in processed foods in India given their low cost and extended shelf life. The World Health Organization has called for the elimination of PHVOs from the global food supply and recommends their replacement with polyunsaturated fat to maximize health benefits. This study examined barriers to replacing industrially produced trans-fat in the Indian food supply and systematically identified potential policy solutions to assist the government in encouraging its removal and replacement with healthier polyunsaturated fat. A combination of food supply chain analysis and semi-structured interviews with key stakeholders was conducted. The main barriers faced by the food-processing sector in terms of reducing use of trans-fat and replacing it with healthier oils in India were the low availability and high cost of oils high in polyunsaturated fats leading to a reliance on palm oil (high in saturated fat) and the low use of those healthier oils in product reformulation. Improved integration between farmers and processors, investment in technology and pricing strategies to incentivize use of healthier oils for product reformulation were identified as policy options. Food processors have trouble accessing sufficient affordable healthy oils for product reformulation, but existing incentives aimed at supporting food processing could be tweaked to ensure a greater supply of healthy oils with the potential to improve population health.

Effects of particle size and hydro-thermal treatment of feed on performance and stomach health in fattening pigs.

Effects of grinding and hydro-thermal treatment of feed on growth performance, slaughter traits, nutrient digestibility, stomach content and stomach health were examined by using 96 crossbred fattening pigs. Pigs were fed a grain-soybean meal-based diet processed by various technical treatments. Feeding groups differed in particle size after grinding (finely vs. coarsely ground feed) and hydro-thermal treatment (without hydro-thermal treatment, pelleting, expanding, expanding and pelleting). Fine grinding and hydro-thermal treatment showed significant improvements on the digestibility of crude nutrients and content of metabolisable energy. Hydro-thermal treatment influenced average daily gain (ADG) and average daily feed intake (DFI) significantly. Finely ground pelleted feed without expanding enhanced performances by increasing ADG and decreasing feed-to-gain ratio (FGR) of fattening pigs. Coarsely ground feed without hydro-thermal treatment resulted in the highest ADG and DFI, however also in the highest FGR. Expanded feed decreased DFI and ADG. Slaughter traits were not affected by treatments. Coarsely ground feed without hydro-thermal treatment had protective effects on the health of gastric pars nonglandularis, however, pelleting increased gastric lesions. Hydro-thermal treatment, especially expanding, resulted in clumping of stomach content which possibly induced satiety by slower ingesta passage rate and thus decreased feed intake. Pigs fed pelleted feed showed less pronounced development of clumps in stomach content compared with expanded feed.

Estimating the impact of somatic cell count on the value of milk utilising parameters obtained from the published literature.

The impact of mastitis on milk value per litre independent of the effect of mastitis on milk volume, was quantified for Ireland using a meta-analysis and a processing sector model. Changes in raw milk composition, cheese processing and composition associated with increased bulk milk somatic cell count (BMSCC) were incorporated into the model. Processing costs and market values were representative of current industry values. It was assumed that as BMSCC increased (i) milk fat and milk protein increased and milk lactose decreased, (ii) fat and protein recoveries decreased, (iii) cheese protein decreased and cheese moisture increased. Five BMSCC categories were examined from ⩽100 000 to >400 000 cells/ml. The analysis showed that as BMSCC increased the production quantities reduced. An increase in BMSCC from 100 000 to >400 000 cells/ml saw a reduction in net revenue of 3·2% per annum (€51·3 million) which corresponded to a reduction in the value of raw milk of €0·0096 cents/l.

Separation of ovotransferrin and ovomucoid from chicken egg white.

Ovotransferrin and ovomucoid were separated using 2 methods after extracting the ovotransferrin- and ovomucoid-containing fraction from egg white. Diluted egg white (2×) was added to Fe(3+) and treated with 43% ethanol (final concentration). After centrifugation, the supernatant was collected and treated with either a high-level ethanol (61% final concentration) or an acidic salt combination (2.5% ammonium sulfate and 2.5% citric acid) to separate ovotransferrin and ovomucoid. For the high-level of ethanol method, ovotransferrin was precipitated using 61% ethanol. After centrifugation, the precipitant was dissolved in 9 vol. of distilled water and the residual ethanol in the solution was removed using ultrafiltration. The supernatant, mainly containing ovomucoid, was diluted with 4 vol. of water, had ethanol removed, and was then concentrated and used as the ovomucoid fraction. For the acidic salt precipitation method, the ethanol in the supernatant was removed first. The ethanol-free solution was then concentrated and treated with a 2.5% ammonium sulfate and 2.5% citric acid combination. After centrifugation, the precipitant was used as the ovotransferrin and the supernatant as the ovomucoid fraction. The ovomucoid fraction from both of the protocols was further purified by heating at 65°C for 20 min and the impurities were removed by centrifugation. The yields of ovomucoid and ovotransferrin were >96 and >92%, respectively. The purity of ovomucoid was >89% and that of the ovotransferrin was >88%. The ELISA results confirmed that the activity of the separated ovotransferrin was >95%. Both of the protocols separated ovotransferrin and ovomucoid effectively and the methods were simple, fast, and easy to scale up.

Sequential separation of lysozyme, ovomucin, ovotransferrin, and ovalbumin from egg white.

Ovalbumin, ovotransferrin, ovomucin, and lysozyme are a few of the egg white proteins that can be used as functional components. The objective of this study was to develop a simple, sequential separation method for multiple proteins from egg white. Separated proteins are targeted for human use, and thus any toxic compounds were excluded. The methods for individual components and the sequential separation were practiced in laboratory scale first, and then tested for scale-up. Lysozyme was separated first using FPC3500 cation exchange resin and then ovomucin using isoelectric precipitation. Ovalbumin and ovotransferrin were separated from the lysozyme- and ovomucin-free egg white by precipitating ovotransferrin first using 5.0% (wt/vol) (NH4)2SO4 and 2.5% (wt/vol) citric acid combination. After centrifugation, the supernatant (S1) was used for ovalbumin separation and the precipitant was dissolved in water, and reprecipitated using 2.0% ammonium sulfate (wt/vol) and 1.5% citric acid (wt/vol) combination. The precipitant was used as ovotransferrin fraction, and the supernatant (S2) was pooled with the first supernatant (S1), desalted using ultrafiltration, and then heat-treated to remove impurities. The yield of ovomucin and ovalbumen was >98% and that of ovotransferrin and lysozyme was >82% for both laboratory and scale-up preparations. The SDS-PAGE and western blotting of the separated proteins, except for ovomucin, showed >90% purity. The ELISA results indicated that the activities of separated ovalbumin, ovotransferrin, and lysozyme were >96%. The protocol separated 4 major proteins in sequence, and the method was simple and easily scaled up.

[Organization and technology in the catering sector]. / Organizzazione e tecnologia nel settore della ristorazione collettiva.

The catering industry is a service characterized by a contract between customer and supplier. In institutional catering industry, the customer is represented by public administration; in private catering industry, the customer is represented by privates. The annual catering trades size is about 6.74 billions of euros, equally distributed between health sector (hospitals, nursing homes), school sector and business sector (ivorkplace food service), with the participation of nearly 1.200 firms and 70.000 workers. Major services include off-premises catering (food prepared away from the location where it's served) and on-premises catering (meals prepared and served at the same place). Several tools and machineries are used during both warehousing and food refrigerating operations, and during preparation, cooking, packaging and transport of meals. In this sector, injuries, rarely resulting serious or deadly, show a downward trend in the last years. On the contrary, the number of occupational diseases shows an upward trend. About the near future, the firms should become global outsourcer, able to provide other services as cleaning, transport and maintenance. In addition, they should invest in innovation: from tools and machineries technology to work organization; from factory lay-out to safely and health in the workplaces.

Assessing the cost barrier for small and medium food processing businesses to meet Preventive Controls for Human Foods standards.

The Preventive Controls for Human Food Rule regulation under the Food Safety Modernization Act sets new food safety standards. Both food safety educators and small and medium sized food processing businesses that manufacture certain value-added or processed foods lack knowledge regarding costs to prepare, implement, and manage ongoing food safety practices under the new standards. Current food safety training materials do not acknowledge costs or provide content addressing potential costs, and food safety educators do not have information needed to guide development of relevant materials that address costs. We combine economics and food science principles and use mixed methods to identify and estimate cost barriers for food processing businesses through an interdisciplinary research and extension project in the Northeast U.S. We first modify Preventive Controls extension programming to acknowledge costs and test how modified programming improves self-reported knowledge about costs. Materials that acknowledge that costs are associated with meeting standards significantly increases participants' self-reported perceived knowledge of costs by 1.3 points on a 1-to-5-point Likert scale. Compared with programming areas in which detailed content is provided, however, improvements in knowledge of costs lags behind overall knowledge gains (3.2 for costs versus 4.1 for food safety content). To fill this content gap, we next conduct semi-structured group interviews with a subset of participants (N = 10), develop a costs analysis framework, and measure actual costs associated with Preventive Controls. We find that initial costs average $20,000 per business to plan, implement, and manage standards, and almost $8,000 in every subsequent year to manage. We demonstrate that even modest interventions can reduce cost barriers for businesses seeking to meet compliance standards. We provide food safety educators with concrete cost information to support businesses to pursue Preventive Controls standards. Study results imply that low-cost methods could improve food safety in mid-scale supply chains.