Structural insights into how vacuolar sorting receptors recognize the sorting determinants of seed storage proteins.

In Arabidopsis, vacuolar sorting receptor isoform 1 (VSR1) sorts 12S globulins to the protein storage vacuoles during seed development. Vacuolar sorting is mediated by specific protein-protein interactions between VSR1 and the vacuolar sorting determinant located at the C terminus (ctVSD) on the cargo proteins. Here, we determined the crystal structure of the protease-associated domain of VSR1 (VSR1-PA) in complex with the C-terminal pentapeptide (468RVAAA472) of cruciferin 1, an isoform of 12S globulins. The 468RVA470 motif forms a parallel ß-sheet with the switch III residues (127TMD129) of VSR1-PA, and the 471AA472 motif docks to a cradle formed by the cargo-binding loop (95RGDCYF100), making a hydrophobic interaction with Tyr99. The C-terminal carboxyl group of the ctVSD is recognized by forming salt bridges with Arg95. The C-terminal sequences of cruciferin 1 and vicilin-like storage protein 22 were sufficient to redirect the secretory red fluorescent protein (spRFP) to the vacuoles in Arabidopsis protoplasts. Adding a proline residue to the C terminus of the ctVSD and R95M substitution of VSR1 disrupted receptor-cargo interactions in vitro and led to increased secretion of spRFP in Arabidopsis protoplasts. How VSR1-PA recognizes ctVSDs of other storage proteins was modeled. The last three residues of ctVSD prefer hydrophobic residues because they form a hydrophobic cluster with Tyr99 of VSR1-PA. Due to charge-charge interactions, conserved acidic residues, Asp129 and Glu132, around the cargo-binding site should prefer basic residues over acidic ones in the ctVSD. The structural insights gained may be useful in targeting recombinant proteins to the protein storage vacuoles in seeds.

A receptor-like cytoplasmic kinase PCRK2 undergoes ubiquitination and proteasomal degradation.

Receptor-like cytoplasmic kinase (RLCK) subfamily VII members are involved in diverse biological processes, like reproduction, immunity, growth and development. Ubiquitination and proteasomal degradation of a RLCK VII member, BOTRYTIS-INDUCED KINASE1 (BIK1) play important roles in regulating immune signaling. It remains largely unknown whether most other RLCK VII members undergo ubiquitination and proteasomal degradation. Here, we select the 6-member RLCK VII-4 to examine the potential proteasomal degradation of its members. We find that three closely related RLCK VII-4 members, PBL38 (AvrPphB SUSCEPTIBLE1-LIKE38), PCRK1 (PTI-COMPROMISED RECEPTOR-LIKE CYTOPLASMIC KINASE1), and PCRK2 are under proteasomal control, while the other members in this group are not. Moreover, we demonstrate that PCRK2 undergoes ubiquitination and proteasomal in a kinase activity-dependent manner. However, the plasma membrane (PM) localization of PCRK2 is not required for its degradation. Our work suggests that many other RLCK VII members may undergo ubiquitination and proteasomal degradation to modulate their homeostasis and cellular functions.

Auxin Metabolite Profiling in Isolated and Intact Plant Nuclei.

The plant nucleus plays an irreplaceable role in cellular control and regulation by auxin (indole-3-acetic acid, IAA) mainly because canonical auxin signaling takes place here. Auxin can enter the nucleus from either the endoplasmic reticulum or cytosol. Therefore, new information about the auxin metabolome (auxinome) in the nucleus can illuminate our understanding of subcellular auxin homeostasis. Different methods of nuclear isolation from various plant tissues have been described previously, but information about auxin metabolite levels in nuclei is still fragmented and insufficient. Herein, we tested several published nucleus isolation protocols based on differential centrifugation or flow cytometry. The optimized sorting protocol leading to promising yield, intactness, and purity was then combined with an ultra-sensitive mass spectrometry analysis. Using this approach, we can present the first complex report on the auxinome of isolated nuclei from cell cultures of Arabidopsis and tobacco. Moreover, our results show dynamic changes in auxin homeostasis at the intranuclear level after treatment of protoplasts with free IAA, or indole as a precursor of auxin biosynthesis. Finally, we can conclude that the methodological procedure combining flow cytometry and mass spectrometry offers new horizons for the study of auxin homeostasis at the subcellular level.

Interspecific hybridization between Ganoderma lingzhi and G. applanatum through protoplast fusion.

Interspecific hybridization between Ganoderma lingzhi and G. applanatum was attempted through polyethylene glycol (PEG) induced fusion technique. The protoplast isolation procedure was simplified, and we obtained a significant number of protoplasts from both Ganoderma species. The number of protoplasts obtained was 5.27 ± 0.31 × 107/mL in G. lingzhi and 5.57 ± 0.49 × 106/mL in G. applanatum. Osmotic stabilizer NaCl (0.4 M) at pH 5.8 and enzymolysis time 3.5 h have supported high frequency of protoplast regeneration. G. lingzhi and G. applanatum regeneration frequency was 1.73 ± 0.04% and 0.23 ± 0.02%, respectively. 40% of PEG induced high number of protoplast fusion the regeneration frequency was 0.09% on a minimal medium. Two hundred fifty-two fusant colonies were isolated from the following four individual experiments. Among them, ten fusants showed the mycelial morphological difference compared to their parents and other fusant isolates. The fruiting body could be generated on oak sawdust and wheat bran substrate, and a few of them showed recombined morphology of the parental strains. The highest yield and biological efficacy (BE) were recorded in GF248, while least in GF244. The hybridity of the fusant was established based on mycelia, fruiting morphology, and PCR fingerprinting. ISSR and RAPD profile analysis of ten fusants and parents depicted that fusants contained polymorphic bands, which specified the rearrangement and deletion of DNA in the fusants. A Dendrogram was constructed based on the RAPD profile, and the clustering data exhibited two major clusters: cluster I included the G. lingzhi and Cluster II, including the G. applanatum and fusant lines. Total polysaccharide (α, ß and total glucan) content was compared with fusants and parental strains. The present study highlighted the efficient methods for protoplast isolation from Ganoderma species. PEG-induced fusants showed high polymorphic frequency index, while the phenotypic characters showed high similarity to G. applanatum. A significant difference was observed in the mushroom yield and its total polysaccharide between the fusants and parental strains.

Incorporation of Magnetic Nanoparticles into Protoplasts of Microalgae Haematococcus pluvialis: A Tool for Biotechnological Applications.

Intensive research on the use of magnetic nanoparticles for biotechnological applications of microalgae biomass guided the development of proper treatment to successfully incorporate them into these single-cell microorganisms. Protoplasts, as cells lacking a cell wall, are extensively used in plant/microalgae genetic manipulation as well as various biotechnological applications. In this work, a detailed study on the formation of protoplasts from Haematococcus pluvialis with the use of enzymatic and mechanical procedures was performed. The optimization of several parameters affecting the formation of protoplasmic cells and cell recovery was investigated. In the enzymatic treatment, a solution of cellulase was studied at different time points of incubation, whereas in the mechanical treatment, glass beads vortexing was used. Mechanical treatment gave better results in comparison to the enzymatic one. Concerning the cell recovery, after the protoplast formation, it was found to be similar in both methods used; cell viability was not investigated. To enhance the protoplast cell wall reconstruction, different "recovery media" with an organic source of carbon or nitrogen were used. Cell morphology during all treatments was evaluated by electron microscopy. The optimal conditions found for protoplast formation and cell reconstruction were successfully used to produce Haematococcus pluvialis cells with magnetic properties.

Protoplast preparation from enriched flagellates and resting cells of Haematococcus pluvialis.

AIMS: To establish a proper protoplast-preparation route from enriched motile flagellates and nonmotile resting cells of Haematococcus pluvialis. METHODS AND RESULTS: Through cultivations in two mixotrophic media, enriched Haematococcus flagellates and resting cells were respectively produced and applied in enzymatic protoplast preparations. Great differences of enzymatic sensitivity and osmotic-lability were identified between them. Flagellates showed the same osmotic-lability as protoplasts and the extracellular matrix-removing rate was applied for an evaluation of protoplast-releasing. During the treatment of flagellates, an addition of more than 0·2 mmol l-1 Ca2+ was found to be essential for maintenance of high cellular viability. More than 80% cellular viability and a 90% protoplast-releasing rate were obtained simultaneously after 2-3 h treatment of 0·06% proteinase K in 0·05 mol l-1 Tris-HCl (pH7·8) buffer with 0·2 mmol l-1 CaCl2 and 0·2 mol l-1 sorbitol/mannitol. For resting cells, a treatment of both 0·12% proteinase K and a combination of 2% cellulase + 1% snailase could function similarly in order to degrade the cellulosic cell wall, while the protoplast yield was limited to about 40%, due to the existence of an undegradable secondary wall in the mature resting cell. CONCLUSION: Proteinase K was efficient for protoplast-releasing from either flagellates or resting cells. Due to the great difference of enzymatic sensitivity and osmotic-lability between flagellates and resting cells, it was necessary to select a different enzymatic treating process based upon the main cell type in the culture. A better protoplast-preparing efficiency was obtained from Haematococcus cells when flagellates were in the majority. SIGNIFICANCE AND IMPACT OF THE STUDY: The protoplast preparation of H. pluvialis was firstly established based on two main cell types of H. pluvialis, motile flagellates and nonmotile resting cells. Increase of flagellate stability and viable protoplast-preparing efficiency through addition of Ca2+ in enzymatic solution was firstly reported.

In vitro synthesis of cellulose microfibrils by a membrane protein from protoplasts of the non-vascular plant Physcomitrella patens.

Plant cellulose synthases (CesAs) form a family of membrane proteins that are associated with hexagonal structures in the plasma membrane called CesA complexes (CSCs). It has been difficult to purify plant CesA proteins for biochemical and structural studies. We describe CesA activity in a membrane protein preparation isolated from protoplasts of Physcomitrella patens overexpressing haemagglutinin (HA)-tagged PpCesA5. Incubating the membrane preparation with UDP-glucose predominantly produced cellulose. Negative-stain EM revealed microfibrils. Cellulase bound to and degraded these microfibrils. Vibrational sum frequency generation (SFG) spectroscopic analysis detected the presence of crystalline cellulose in the microfibrils. Putative CesA proteins were frequently observed attached to the microfibril ends. Combined cross-linking and gradient centrifugation showed bundles of cellulose microfibrils with larger particle aggregates, possibly CSCs. These results suggest that P. patens is a useful model system for biochemical and structural characterization of plant CSCs and their components.

Bacterial protoplast-derived nanovesicles as vaccine delivery system against bacterial infection.

The notion that widespread infectious diseases could be best managed by developing potent, adjuvant-free vaccines has resulted in the use of various biological immune-stimulating components as new vaccine candidates. Recently, extracellular vesicles, also known as exosomes and microvesicles in mammalian cells and outer membrane vesicles in Gram-negative bacteria, have gained attention for the next generation vaccine. However, the more invasive and effective the vaccine is in delivery, the more risk it holds for severe immune toxicity. Here, in optimizing the current vaccine delivery system, we designed bacterial protoplast-derived nanovesicles (PDNVs), depleted of toxic outer membrane components to generate a universal adjuvant-free vaccine delivery system. These PDNVs exhibited significantly higher productivity and safety than the currently used vaccine delivery vehicles and induced strong antigen-specific humoral and cellular immune responses. Moreover, immunization with PDNVs loaded with bacterial antigens conferred effective protection against bacterial sepsis in mice. These nonliving nanovesicles derived from bacterial protoplast open up a new avenue for the creation of next generation, adjuvant-free, less toxic vaccines to be used to prevent infectious diseases.

'Laba' garlic processed by dense phase carbon dioxide: the relation between green colour generation and cellular structure, alliin consumption and alliinase activity.

BACKGROUND: 'Laba' garlic is usually processed by soaking garlic in vinegar for more than 1 week during winter. It is popular for its unique green colour and tasty flavour. Greening is desirable and required for this product as its characteristic. Dense phase carbon dioxide (DPCD) had a significant effect on the greening of intact garlic (Allium sativum L.) cloves. The relation between green colour generation and alliin consumption, alliinase activity and the cellular structure of garlic, respectively, were investigated in this work. The effects of treatment time, pressure and temperature of DPCD were also analysed and discussed. RESULTS: DPCD had a significant effect on the cellular structure of garlic cells. Garlic protoplast underwent greater morphological change after DPCD treatments at higher temperatures while the amount of precipitate increased with greater treatment time and temperature. Common trends on garlic greening and alliin consumption were observed except for DPCD treatment at 10 MPa and 65 °C. The alliinase activity decreased with increasing treatment time, pressure and temperature. It reached the lowest level at 13 MPa and 55 °C. CONCLUSION: The formation of the green colour was a comprehensive result of DPCD on changing cellular structure, alliin consumption and alliinase activity. DPCD treatment at 10 MPa and 55 °C was the optimum condition for the greening of 'Laba' garlic. This work further facilitated the application of DPCD in the industrial production of 'Laba' garlic. © 2015 Society of Chemical Industry.

Spectral snapshots of bacterial cell-wall composition and the influence of antibiotics by whole-cell NMR.

Gram-positive bacteria surround themselves with a thick cell wall that is essential to cell survival and is a major target of antibiotics. Quantifying alterations in cell-wall composition are crucial to evaluating drug modes of action, particularly important for human pathogens that are now resistant to multiple antibiotics such as Staphylococcus aureus. Macromolecular and whole-cell NMR spectroscopy allowed us to observe the full panel of carbon and nitrogen pools in S. aureus cell walls and intact whole cells. We discovered that one-dimensional (13)C and (15)N NMR spectra, together with spectroscopic selections based on dipolar couplings as well as two-dimensional spin-diffusion measurements, revealed the dramatic compositional differences between intact cells and cell walls and allowed the identification of cell-wall signatures in whole-cell samples. Furthermore, the whole-cell NMR approach exhibited the sensitivity to detect distinct compositional changes due to treatment with the antibiotics fosfomycin (a cell-wall biosynthesis inhibitor) and chloramphenicol (a protein synthesis inhibitor). Whole cells treated with fosfomycin exhibited decreased peptidoglycan contributions while those treated with chloramphenicol contained a higher percentage of peptidoglycan as cytoplasmic protein content was reduced. Thus, general antibiotic modes of action can be identified by profiling the total carbon pools in intact whole cells.

A hemicellulose-bound form of silicon with potential to improve the mechanical properties and regeneration of the cell wall of rice.

Silicon (Si) plays a large number of diverse roles in plants, but the structural and chemical mechanisms operating at the single-cell level remain unclear. We isolate the cell walls from suspension-cultured individual cells of rice (Oryza sativa) and fractionate them into three main fractions including cellulose (C), hemicellulose (HC) and pectin (P). We find that most of the Si is in HC as determined by inductively coupled plasma-mass spectrometry (ICP-MS), where Si may covalently crosslink the HC polysacchrides confirmed by X-ray photoelectron spectroscopy (XPS). The HC-bound form of Si could improve both the mechanical property and regeneration of the cell walls investigated by a combination of atomic force microscopy (AFM) and confocal laser scanning microscopy (CLSM). This study provides further evidence that HC could be the major ligand bound to Si, which broadens our understanding of the chemical nature of 'anomalous' Si in plant cell walls.

Contamination risks in work with synthetic peptides: flg22 as an example of a pirate in commercial peptide preparations.

The pattern recognition receptor FLAGELLIN SENSING2 (FLS2) renders plant cells responsive to subnanomolar concentrations of flg22, the active epitope of bacterial flagellin. We recently observed that a preparation of the peptide IDL1, a signal known to regulate abscission processes via the receptor kinases HAESA and HAESA-like2, apparently triggered Arabidopsis thaliana cells in an FLS2-dependent manner. However, closer investigation revealed that this activity was due to contamination by a flg22-type peptide, and newly synthesized IDL1 peptide was completely inactive in FLS2 signaling. This raised alert over contamination events occurring in the process of synthesis or handling of peptides. Two recent reports have suggested that FLS2 has further specificities for structurally unrelated peptides derived from CLV3 and from Ax21. We thus scrutinized these peptides for activity in Arabidopsis cells as well. While responding to <1 nM flg22, Arabidopsis cells proved blind even to 100 µM concentrations of CLV3p and axY(s)22. Our results confirm the exquisite sensitivity and selectivity of FLS2 for flg22. They also show that inadvertent contaminations with flg22-type peptides do occur and can be detected even in trace amounts by FLS2.

New Arabidopsis thaliana cytochrome c partners: a look into the elusive role of cytochrome c in programmed cell death in plants.

Programmed cell death is an event displayed by many different organisms along the evolutionary scale. In plants, programmed cell death is necessary for development and the hypersensitive response to stress or pathogenic infection. A common feature in programmed cell death across organisms is the translocation of cytochrome c from mitochondria to the cytosol. To better understand the role of cytochrome c in the onset of programmed cell death in plants, a proteomic approach was developed based on affinity chromatography and using Arabidopsis thaliana cytochrome c as bait. Using this approach, ten putative new cytochrome c partners were identified. Of these putative partners and as indicated by bimolecular fluorescence complementation, nine of them bind the heme protein in plant protoplasts and human cells as a heterologous system. The in vitro interaction between cytochrome c and such soluble cytochrome c-targets was further corroborated using surface plasmon resonance. Taken together, the results obtained in the study indicate that Arabidopsis thaliana cytochrome c interacts with several distinct proteins involved in protein folding, translational regulation, cell death, oxidative stress, DNA damage, energetic metabolism, and mRNA metabolism. Interestingly, some of these novel Arabidopsis thaliana cytochrome c-targets are closely related to those for Homo sapiens cytochrome c (Martínez-Fábregas et al., unpublished). These results indicate that the evolutionarily well-conserved cytosolic cytochrome c, appearing in organisms from plants to mammals, interacts with a wide range of targets on programmed cell death. The data have been deposited to the ProteomeXchange with identifier PXD000280.

The plant cytoskeleton controls regulatory volume increase.

The ability to adjust cell volume is required for the adaptation to osmotic stress. Plant protoplasts can swell within seconds in response to hypoosmotic shock suggesting that membrane material is released from internal stores. Since the stability of plant membranes depends on submembraneous actin, we asked, whether this regulatory volume control depends on the cytoskeleton. As system we used two cell lines from grapevine which differ in their osmotic tolerance and observed that the cytoskeleton responded differently in these two cell lines. To quantify the ability for regulatory volume control, we used hydraulic conductivity (Lp) as readout and demonstrated a role of the cytoskeleton in protoplast swelling. Chelation of calcium, inhibition of calcium channels, or manipulation of membrane fluidity, did not significantly alter Lp, whereas direct manipulation of the cytoskeleton via specific chemical reagents, or indirectly, through the bacterial elicitor Harpin or activation of phospholipase D, was effective. By optochemical engineering of actin using a caged form of the phytohormone auxin we can break the symmetry of actin organisation resulting in a localised deformation of cell shape indicative of a locally increased Lp. We interpret our findings in terms of a model, where the submembraneous cytoskeleton controls the release of intracellular membrane stores during regulatory volume change.

A Lallzyme MMX-based rapid method for fission yeast protoplast preparation.

Fungal cells including yeasts are surrounded by cell wall that counteracts turgor pressure and prevents cell lysis. Many yeast experiments, including genetic manipulation of sterile strains, morphogenesis studies, nucleic acid isolation and many others, require mechanical breakage or enzymatic removal of the cell wall. Some of these experiments require the generation of live cells lacking cell walls, called protoplasts, that can be maintained in osmostabilized medium. Enzymatic digestion of cell wall proteoglycans is a commonly used method of protoplast preparation. Currently existing protocols for fission yeast cell wall digestion are time consuming and not very efficient. We developed a new rapid method for fission yeast protoplast preparation that relies on digesting cell walls with Lallzyme MMX commercial enzyme mix, which produces protoplasts from all cells in less than 10 min. We demonstrate that these protoplasts can be utilized in three commonly used fission yeast protocols. Thus, we provide the fission yeast community with a robust and efficient plasmid extraction method, a new protocol for diploid generation and an assay for protoplast recovery that should be useful for studies of morphogenesis. Our method is potentially applicable to other yeasts and fungi.

A fusant of Sphingomonas sp. GY2B and Pseudomonas sp. GP3A with high capacity of degrading phenanthrene.

A fusant strain F14 with high biodegradation capability of phenanthrene was obtained by protoplast fusion between Sphingomonas sp. GY2B (GenBank DQ139343) and Pseudomonas sp. GP3A (GenBank EU233280). F14 was screened and identified from 39 random fusants by antibiotic tests, scanning electron microscope (SEM) and randomly amplified polymorphic DNA (RAPD). The result of SEM analysis demonstrated that the cell shape of fusant F14 different from parental strains. RAPD analysis of 5 primers generated a total of 70 bands. The genetic similarity indices between F14 and parental strains GY2B and GP3A were 27.9 and 34.6 %, respectively. F14 could rapidly degrade phenanthrene within 24 h, and the degradation efficiency was much better than GY2B and GP3A. GC-MS analysis of metabolites of phenanthrene degradation indicated F14 had a different degradation pathway from GY2B. Furthermore, the fusant strain F14 had a wider adaptation of temperatures (25-36 °C) and pH values (6.5-9.0) than GY2B. The present study indicated that fusant strain F14 could be an effective and environment-friendly bacterial strain for PAHs bioremediation.

Functional identification of OsHk6 as a homotypic cytokinin receptor in rice with preferential affinity for iP.

Cytokinins are involved in key developmental processes in rice (Oryza sativa), including the regulation of cell proliferation and grain yield. However, the in vivo action of histidine kinases (OsHks), putative cytokinin receptors, in rice cytokinin signaling remains elusive. This study examined the function and characteristics of OsHk3, 4 and 6 in rice. OsHk6 was highly sensitive to isopentenyladenine (iP) and was capable of restoring cytokinin-dependent ARR6 reporter expression in the ahk2 ahk3 Arabidopsis mutant upon treatment with 1 nM iP. OsHk4 recognized trans-zeatin (tZ) and iP, while OsHk3 scarcely induced cytokinin signaling activity. OsHk4 and OsHk6 mediated the canonical two-component signaling cascade of Arabidopsis to induce phosphorylation of ARR2. OsHk4 and OsHk6 were highly expressed in spikelets, suggesting that tZ and iP might play key roles in grain development. OsHk6 formed a self-interacting homomer in rice protoplasts, although the trans-phosphorylation activity between subunits was much lower than the intra-molecular trans-phosphorylation activity. This indicates that the action mechanism of OsHks is evolutionarily diverged from bacterial histidine kinases. Ectopic expression of OsHk6 in rice calli promoted green pigmentation and subsequent shoot induction, further supporting an OsHk6 in planta function as a cytokinin receptor. From the results of this study, OsHks are homomeric cytokinin receptors with distinctive cytokinin preferences in rice.

Inhibition of phenylpropanoid biosynthesis increases cell wall digestibility, protoplast isolation, and facilitates sustained cell division in American elm (Ulmus americana).

BACKGROUND: Protoplast technologies offer unique opportunities for fundamental research and to develop novel germplasm through somatic hybridization, organelle transfer, protoclonal variation, and direct insertion of DNA. Applying protoplast technologies to develop Dutch elm disease resistant American elms (Ulmus americana L.) was proposed over 30 years ago, but has not been achieved. A primary factor restricting protoplast technology to American elm is the resistance of the cell walls to enzymatic degradation and a long lag phase prior to cell wall re-synthesis and cell division. RESULTS: This study suggests that resistance to enzymatic degradation in American elm was due to water soluble phenylpropanoids. Incubating tobacco (Nicotiana tabacum L.) leaf tissue, an easily digestible species, in aqueous elm extract inhibits cell wall digestion in a dose dependent manner. This can be mimicked by p-coumaric or ferulic acid, phenylpropanoids known to re-enforce cell walls. Culturing American elm tissue in the presence of 2-aminoindane-2-phosphonic acid (AIP; 10-150 µM), an inhibitor of phenylalanine ammonia lyase (PAL), reduced flavonoid content, decreased tissue browning, and increased isolation rates significantly from 11.8% (±3.27) in controls to 65.3% (±4.60). Protoplasts isolated from callus grown in 100 µM AIP developed cell walls by day 2, had a division rate of 28.5% (±3.59) by day 6, and proliferated into callus by day 14. Heterokaryons were successfully produced using electrofusion and fused protoplasts remained viable when embedded in agarose. CONCLUSIONS: This study describes a novel approach of modifying phenylpropanoid biosynthesis to facilitate efficient protoplast isolation which has historically been problematic for American elm. This isolation system has facilitated recovery of viable protoplasts capable of rapid cell wall re-synthesis and sustained cell division to form callus. Further, isolated protoplasts survived electrofusion and viable heterokaryons were produced. Together, these results provide the first evidence of sustained cell division, callus regeneration, and potential application of somatic cell fusion in American elm, suggesting that this source of protoplasts may be ideal for genetic manipulation of this species. The technological advance made with American elm in this study has potential implications in other woody species for fundamental and applied research which require availability of viable protoplasts.

Dielectric analysis and multi-cell electrofusion of the yeast Pichia pastoris for electrophysiological studies.

The yeast Pichia pastoris has become the most favored eukaryotic host for heterologous protein expression. P. pastoris strains capable of overexpressing various membrane proteins are now available. Due to their small size and the fungal cell wall, however, P. pastoris cells are hardly suitable for direct electrophysiological studies. To overcome these limitations, the present study aimed to produce giant protoplasts of P. pastoris by means of multi-cell electrofusion. Using a P. pastoris strain expressing channelrhodopsin-2 (ChR2), we first developed an improved enzymatic method for cell wall digestion and preparation of wall-less protoplasts. We thoroughly analyzed the dielectric properties of protoplasts by means of electrorotation and dielectrophoresis. Based on the dielectric data of tiny parental protoplasts (2-4 µm diameter), we elaborated efficient electrofusion conditions yielding consistently stable multinucleated protoplasts of P. pastoris with diameters of up to 35 µm. The giant protoplasts were suitable for electrophysiological measurements, as proved by whole-cell patch clamp recordings of light-induced, ChR2-mediated currents, which was impossible with parental protoplasts. The approach presented here offers a potentially valuable technique for the functional analysis of low-signal channels and transporters, expressed heterologously in P. pastoris and related host systems.

Solid-state (19)F-NMR of peptides in native membranes.

To understand how membrane-active peptides (MAPs) function in vivo, it is essential to obtain structural information about them in their membrane-bound state. Most biophysical approaches rely on the use of bilayers prepared from synthetic phospholipids, i.e. artificial model membranes. A particularly successful structural method is solid-state NMR, which makes use of macroscopically oriented lipid bilayers to study selectively isotope-labelled peptides. Native biomembranes, however, have a far more complex lipid composition and a significant non-lipidic content (protein and carbohydrate). Model membranes, therefore, are not really adequate to address questions concerning for example the selectivity of these membranolytic peptides against prokaryotic vs eukaryotic cells, their varying activities against different bacterial strains, or other related biological issues.Here, we discuss a solid-state (19)F-NMR approach that has been developed for structural studies of MAPs in lipid bilayers, and how this can be translated to measurements in native biomembranes. We review the essentials of the methodology and discuss key objectives in the practice of (19)F-labelling of peptides. Furthermore, the preparation of macroscopically oriented biomembranes on solid supports is discussed in the context of other membrane models. Two native biomembrane systems are presented as examples: human erythrocyte ghosts as representatives of eukaryotic cell membranes, and protoplasts from Micrococcus luteus as membranes from Gram-positive bacteria. Based on our latest experimental experience with the antimicrobial peptide gramicidin S, the benefits and some implicit drawbacks of using such supported native membranes in solid-state (19)F-NMR analysis are discussed.