Evaluation of functional characteristics of Acidithiobacillus thiooxidans microencapsulated in gum arabic by spray-drying as biotechnological tool in the mining industry.

The mining and metallurgical industry represents one of the leading causes of environmental pollution. In this context, the optimization of mineral waste management and the efficient extraction of metals of interest becomes an imperative priority for a sustainable future. Microorganisms such as Acidithiobacillus thiooxidans have represented a sustainable and economical alternative in recent years due to their capacity for environmental remediation in bioleaching processes because of their sulfur-oxidizing capacity and sulfuric acid generation. However, its use has been limited due to the reluctance of mine operators because of the constant reproduction of the bacterial culture in suitable media and the care that this entails. In this work, the central objective was to evaluate the functional characteristics of A. thiooxidans, microencapsulated and stored at room temperature for three years in vacuum bags, using a spray drying process with gum arabic as a wall vector. Growth kinetics showed a survival of 80 ± 0.52% after this long period of storage. Also, a qualitative fluorescence technique with a 5-cyano-2-3 ditolyl tetrazolium (CTC) marker was used to determine the respiratory activity of the microorganisms as soon as it was resuspended. On the other hand, the consumption of resuspended sulfur was evaluated to corroborate the correct metabolic functioning of the bacteria, with results of up to 50% sulfur reduction in 16 days and sulfate generation of 513.85 ± 0.4387 ppm and 524.15 ± 0.567 ppm for microencapsulated and non-microencapsulated cultures, respectively. These results demonstrate the success after three years of the microencapsulation process and give guidelines for its possible application in the mining-metallurgical industry.

Fabrication of Uniform Melatonin Microparticles Potentially for Nasal Delivery: A Comparison of Spray Drying and Spray Freeze Drying.

PURPOSE: Insomnia is a major health concern, and melatonin (MLT) is key for initiating sleep. Delivering MLT nasally can enhance brain bioavailability by targeting the olfactory region. This study aimed to fabricate MLT embedded microparticles for nasal delivery. METHODS: MLT-cyclodextrin (CD) derivatives complex microparticles (MCCMPs) were fabricated by spray drying and spray freeze drying MLT and CD derivative solutions. Phase solubility and 1H-1H ROSEY NMR analysis assessed MLT-CD assembly. The effects of formulation compositions and process parameters on microparticle structural attributes were investigated. The in vitro nasal release and deposition performances were evaluated by a modified paddle-over-disk apparatus and 3D-printed nasal cavity cast, respectively. RESULTS: Sodium sulphobutylether-ß-cyclodextrin (SBE-ß-CD) exhibited the best complexation ability with MLT, with the indole structure of MLT included in its cavity. Spray dried MCCMPs showed dense structure with high density, while the spray freeze dried counterpart showed the brittle and porous structure with low density. Despite the porous structure may promote the release rate of spray freeze dried samples, the high hydrophilicity of the CD derivative overshadows this advantage. Samples prepared by spray drying not only exhibited rapid release rates but also could deposit more effectively in the olfactory region, as they avoid breakage due to their higher mechanical strength. The optimal sample showed ~ 86.70% of the MLT released at 20 min and ~ 10.57% of the deposition fraction in the olfactory region. CONCLUSIONS: This work compares MCCMPs fabricated by spray drying and spray freeze drying, providing the optimal formulation and process combinations.

Mechanistic study of the differences in lactic acid bacteria resistance to freeze- or spray-drying and storage.

Lactobacillus delbrueckii subsp. bulgaricus and Lactiplantibacillus plantarum are two lactic acid bacteria (LAB) widely used in the food industry. The objective of this work was to assess the resistance of these bacteria to freeze- and spray-drying and study the mechanisms involved in their loss of activity. The culturability and acidifying activity were measured to determine the specific acidifying activity, while membrane integrity was studied by flow cytometry. The glass transitions temperature and the water activity of the dried bacterial suspensions were also determined. Fourier transform infrared (FTIR) micro-spectroscopy was used to study the biochemical composition of cells in an aqueous environment. All experiments were performed after freezing, drying and storage at 4, 23 and 37 °C. The results showed that Lb. bulgaricus CFL1 was sensitive to osmotic, mechanical, and thermal stresses, while Lpb. plantarum WCFS1 tolerated better the first two types of stress but was more sensitive to thermal stress. Moreover, FTIR results suggested that the sensitivity of Lb. bulgaricus CFL1 to freeze-drying could be attributed to membrane and cell wall degradation, whereas changes in nucleic acids and proteins would be responsible of heat inactivation of both strains associated with spray-drying. According to the activation energy values (47-85 kJ/mol), the functionality loss during storage is a chemically limited reaction. Still, the physical properties of the glassy matrix played a fundamental role in the rates of loss of activity and showed that a glass transition temperature 40 °C above the storage temperature is needed to reach good preservation during storage. KEY POINTS: • Specific FTIR bands are proposed as markers of osmotic, mechanic and thermal stress • Lb. bulgaricus CFL1 was sensitive to all three stresses, Lpb. plantarum WCFS1 to thermal stress only • Activation energy revealed chemically limited reactions ruled the activity loss in storage.

Selenized lactic acid bacteria microencapsulated by spray drying: A promising strategy for beef cattle feed supplementation.

This study aimed to assess the technical feasibility of incorporating selenized Lactobacillus spp. microencapsulated via spray drying into cattle feed. Gum Arabic and maltodextrin were used as encapsulating agents. The encapsulation process was carried out with a drying air flow rate of 1.75 m3/min, inlet air temperature of 90°C, and outlet air temperature of 75°C. The viability of the encapsulated microorganisms and the technological characteristics of the obtained microparticles were evaluated. Microorganisms were incorporated into beef cattle feed to supplement their diet with up to 0.3 mg of Se per kilogram of feed. The encapsulated particles, consisting of a 50/50 ratio of gum Arabic/maltodextrin at a 1:20 proportion of selenized biomass to encapsulant mixture, exhibited superior technical viability for application in beef cattle feed. Supplemented feeds displayed suitable moisture, water activity, and hygroscopicity values, ensuring the preservation of viable microorganisms for up to 5 months of storage, with an approximate count of 4.5 log CFU/g. Therefore, supplementing beef cattle feed with selenized and microencapsulated lactic acid bacteria represents a viable technological alternative, contributing to increased animal protein productivity through proper nutrition.

Development of a dry powder formulation for pulmonary delivery of azithromycin-loaded nanoparticles.

The COVID-19 pandemic has raised concern regarding respiratory system diseases and oral inhalation stands out as an attractive non-invasive route of administration for pulmonary diseases such as chronic bronchitis, cystic fibrosis, COVID-19 and community-acquired pneumonia. In this context, we encapsulated azithromycin in polycaprolactone nanoparticles functionalized with phospholipids rich in dipalmitoylphosphatidylcholine and further produced a fine powder formulation by spray drying with monohydrated lactose. Nanoparticles obtained by the emulsion/solvent diffusion-evaporation technique exhibited a mean hydrodynamic diameter around 195-228 nm with a narrow monomodal size distribution (PdI < 0.2). Nanoparticle dispersions were spray-dried at different inlet temperatures, atomizing air-flow, aspirator air flow, and feed rate, using lactose as a drying aid, resulting in a maximal process yield of 63% and an encapsulation efficiency of 83%. Excipients and the dry powder formulations were characterized in terms of morphology, chemical structure, thermal analyses and particle size by SEM, FTIR, DSC/TGA and laser light diffraction. The results indicated spherical particles with 90% at 4.06 µm or below, an adequate size for pulmonary delivery. Aerosolization performance in a NGI confirmed good aerodynamic properties. Microbiological assays showed that the formulation preserves AZM antimicrobial effect against Staphylococcus aureus and Streptococcus pneumoniae strains, with halos above 18 mm. In addition, no formulation-related cytotoxicity was observed against the human cell lines BEAS-2B (lung epithelial), HUVEC (endothelial) and HFF1 (fibroblasts). Overall, the approach described here allows the production of AZM-PCL nanoparticles incorporated into inhalable microparticles, enabling more efficient pulmonary therapy of lung infections.

Effect of nanobubbles on powder morphology in the spray drying process.

This study investigated the influence of gas-injected nanobubbles on the morphology of particles during spray drying under various experimental conditions. The nanoparticle tracking system was used to measure the generation, size, and concentration of nanobubbles. Experiments were conducted at different temperatures (160°C-260°C) and feed rates (0.2-0.26 g/s) to examine the effect of nanobubbles on spray drying and present diverse results. The deionized (DI) water with generated nanobubbles had a particle concentration of 1.8 × 108 particles/mL and a mean particle size of 242.6 nm, which was ∼3.31 × 107 particles/mL higher untreated DI water. The maltodextrin solution containing nanobubbles also showed a significant increase in particle generation, with a concentration of 1.62 × 109 particles/mL. The viscosity of the maltodextrin solution containing nanobubbles decreased by ∼18%, from 9.3 mPa·s to 7.5 mPa·s. Overall, the size of the generated particles was similar regardless of nanobubble treatment, but there was a tendency for particle size to increase under specific temperature (260°C) and feed flow rate (0.32 g/s) conditions. Furthermore, it was observed that the Hausner ratio significantly varied with increasing temperature and feed flow rate, and these results were explained through scanning electron microscopy images. These findings confirm that the gas nanobubbles mixed in the feed can exert diverse effects on the spray drying system and powder characteristics depending on the operating conditions. This study suggests that nanobubbles can contribute to a more efficient process in spray drying and can influence the morphological characteristics of particles depending on the spray drying conditions.

Whey protein concentrate and skimmed milk powder as encapsulation agents for coffee silverskin extracts processed by spray drying.

We tested the hypothesis that milk proteins, through microencapsulation, guarantee protection against bioactive substances in coffee silverskin extracts. Therefore, the aim of this study was to carry out technological, nutritional and physicochemical characterisation of a coffee silverskin extract microencapsulated using instant skim milk powder and whey protein concentrate as wall materials. The aqueous extract of coffee silverskin was spray-dried using 10% (w/v) skim milk powder and whey protein concentrate. The samples were characterised by determining the water content, water activity, particle size distribution, colour analysis and total phenolic compound content as well as antioxidant activity using 2,2-diphenyl-radical 1-picrylhydrazyl scavenging methods, nitric oxide radical inhibition and morphological analysis. The product showed water activity within a range that ensured greater stability, and the reduced degradation of the dried coffee silverskin extract with whey protein concentrate resulted in better rehydration ability. The luminosity parameter was higher and the browning index was lower for the encapsulated samples than for the pure coffee silverskin extract. The phenolic compound content (29.23 ± 8.39 and 34.00 ± 8.38 mg gallic acid equivalents/g for the coffee silverskin extract using skimmed milk powder and whey protein concentrate, respectively) and the antioxidant activity of the new product confirmed its potential as a natural source of antioxidant phenolic compounds. We conclude that the dairy matrices associated with spray drying preserved the bioactive and antioxidant activities of coffee silverskin extracts.

Effects of spray drying on the content of crystal proteins of Bacillus thuringiensis and the protection by organic and inorganic auxiliaries.

Spray drying is an important industrial method for the preparation of B. thuringiensis powder from fermentation liquor. The effect of spray drying on the crystal proteins, however, has not been reported in the literature so far. The present study systematically investigated the effect of inlet air temperature, outlet air temperature, atomizing air pressure and additives (including organic and inorganic auxiliaries) on the thermal destruction of crystal proteins of B. thuringiensis. The results indicated that the content of crystal proteins of B. thuringiensis powder decreased with increased inlet air temperature, outlet air temperature and atomising air pressure. The pseudo-z values for inlet air temperature, outlet air temperature and atomizing air pressure were 826.4 â„ƒ, 204.0 â„ƒ and 4.74 MPa, respectively. Among them, the outlet air temperature was a major parameter influencing the thermal destruction of crystal proteins, therefore, the decrease of the outlet air temperature was beneficial to increase the protein content in powder. Although the spray drying had an adverse effect on crystal proteins, the crystal protein content in spray-dried powder approached that in freeze-dried powder when the inlet air temperature of 165 â„ƒ, outlet air temperature of 70 â„ƒ and atomizing air pressure of 0.15 MPa were employed. The addition of some organic and inorganic auxiliaries to fermentation liquor can protect the crystal proteins from heat damage.

Microencapsulation of natural products using spray drying; an overview.

AIMS: This study examines microencapsulation as a method to enhance the stability of natural compounds, which typically suffer from inherent instability under environmental conditions, aiming to extend their application in the pharmaceutical industry. METHODS: We explore and compare various microencapsulation techniques, including spray drying, freeze drying, and coacervation, with a focus on spray drying due to its noted advantages. RESULTS: The analysis reveals that microencapsulation, especially via spray drying, significantly improves natural compounds' stability, offering varied morphologies, sizes, and efficiencies in encapsulation. These advancements facilitate controlled release, taste modification, protection from degradation, and extended shelf life of pharmaceutical products. CONCLUSION: Microencapsulation, particularly through spray drying, presents a viable solution to the instability of natural compounds, broadening their application in pharmaceuticals by enhancing protection and shelf life.

Physical and Functional Properties of Powders Obtained during Spray Drying of Cyani flos Extracts.

Edible flowers are a potential source of bioactive ingredients and are also an area of scientific research. Particularly noteworthy are Cyani flos, which have a wide range of uses in herbal medicine. The below study aimed to investigate the influence of selected soluble fiber fractions on the selected properties of physical and biochemical powders obtained during spray drying a water extract of Cyani flos. The drying efficiency for the obtained powders was over 60%. The obtained powders were characterized by low moisture content (≤4.99%) and water activity (≤0.22). The increase in the addition of pectin by the amount of 2-8% in the wall material resulted in a decrease in hygroscopicity, water solubility, and protection of flavonoids and anthocyanins both before and after digestion in the tested powders in comparison to the sample with only inulin as a carrier. Additionally, it was noted that all samples were characterized by high bioaccessibility when determining antioxidant properties and xanthine oxidase inhibition.

Advantages of Spray Drying over Freeze Drying: A Comparative Analysis of Lonicera caerulea L. Juice Powders-Matrix Diversity and Bioactive Response.

The study investigated the impact of Lonicera caerulea L. juice matrix modification and drying techniques on powder characteristics. The evaluation encompassed phenolics (514.7-4388.7 mg/100 g dry matter), iridoids (up to 337.5 mg/100 g dry matter), antioxidant and antiglycation capacity, as well as anti-ageing properties of powders produced using maltodextrin, inulin, trehalose, and palatinose with a pioneering role as a carrier. Spray drying proved to be competitive with freeze drying for powder quality. Carrier application influenced the fruit powder properties. Trehalose protected the phenolics in the juice extract products, whereas maltodextrin showed protective effect in the juice powders. The concentrations of iridoids were influenced by the matrix type and drying technique. Antiglycation capacity was more affected by the carrier type in juice powders than in extract products. However, with carrier addition, the latter showed approximately 12-fold higher selectivity for acetylcholinesterase than other samples. Understanding the interplay between matrix composition, drying techniques, and powder properties provides insights for the development of plant-based products with tailored attributes, including potential health-linked properties.

Microencapsulation of Extracts of Strawberry (Fragaria vesca) By-Products by Spray-Drying Using Individual and Binary/Ternary Blends of Biopolymers.

Valorization of agricultural and food by-products (agri-food waste) and maximum utilization of this raw material constitute a highly relevant topic worldwide. Agri-food waste contains different types of phytochemical compounds such as polyphenols, that display a set of biological properties, including anti-inflammatory, chemo-preventive, and immune-stimulating effects. In this work, the microencapsulation of strawberry (Fragaria vesca) plant extract was made by spray-drying using individual biopolymers, as well as binary and ternary blends of pectin, alginate, and carrageenan. The microparticle morphologies depended on the formulation used, and they had an average size between 0.01 µm and 16.3 µm considering a volume size distribution. The encapsulation efficiency ranged between 81 and 100%. The kinetic models of Korsmeyer-Peppas (R2: 0.35-0.94) and Baker-Lonsdale (R2: 0.73-1.0) were fitted to the experimental release profiles. In general, the releases followed a "Fickian Diffusion" mechanism, with total release times varying between 100 and 350 (ternary blends) seconds. The microparticles containing only quercetin (one of the main polyphenols in the plant) showed higher antioxidant power compared to the extract and empty particles. Finally, the addition of the different types of microparticles to the gelatine (2.7 mPa.s) and to the aloe vera gel (640 mPa.s) provoked small changes in the viscosity of the final gelatine (2.3 and 3.3 mPa.s) and of the aloe vera gel (621-653 mPa.s). At a visual level, it is possible to conclude that in the gelatine matrix, there was a slight variation in color, while in the aloe vera gel, no changes were registered. In conclusion, these microparticles present promising characteristics for food, nutraceutical, and cosmetic applications.

Carriers based on dairy by-products and dehumidified-air spray drying as a novel multiple approach towards improved retention of phenolics in powders: sour cherry juice concentrate case study.

BACKGROUND: Sour cherry juice concentrate powder can serve as a modern, easy-to-handle, phenolics-rich merchandise; however, its transformation into powdered form requires the addition of carriers. In line with the latest trends in food technology, this study valorizes the use of dairy by-products (whey protein concentrate, whey, buttermilk, and mixes with maltodextrin) as carriers. A new multiple approach for higher drying yield, phenolics retention (phenolic acids, flavonols and anthocyanins) and antioxidant capacity of powders were tested as an effect of simultaneous decrease of drying temperature due to the drying air dehumidification and lower carrier content. RESULTS: Dairy-based carriers were effective for spray drying of sour cherry-juice concentrate. The drying yield was increased and retention of phenolics was higher when compared with maltodextrin. The application of dehumidified air, which enabled the drying temperature to be reduced, affected drying yield positively, and also affected particle morphology and retention of phenolics (the phenolic content was approximately 30% higher than with spray drying). CONCLUSIONS: The study proved that it is possible to apply dairy-based by-products to produce sour cherry juice concentrate powders profitably, lowering the spray-drying temperature and changing the carrier content. Dehumidified air spray drying can be recommended for the production of fruit juice concentrate powders with improved physicochemical properties. © 2023 Society of Chemical Industry.

Influence of pasteurization and spray drying on the fat digestion behavior of human milk fat analog emulsion: a simulated in vitro infant digestion study.

BACKGROUND: Human milk fat analog emulsion (HMFAE) is an emulsion that mimics the composition and structure of human milk (HM) fat globules. The application of HMFAE in infant formula requires a series of milk powder processing steps, such as pasteurization and spray drying. However, the effect of milk powder processing on fat digestion of HMFAE is still unclear. In this study, the influence of pasteurization and spray drying on the lipolysis behavior of HMFAE was studied and compared with HM using a simulated infant in vitro digestion model. RESULTS: Pasteurization and spray drying increased the flocculation and aggregation of lipid droplets in HMFAE during digestion. Spray drying destroyed the lipid droplet structure of HMFAE, and partial milk fat globule membrane-covered lipid droplets turned into protein-covered lipid droplets, which aggravated lipid-protein aggregation during gastric digestion and hindered fat digestion in the small intestine. The final lipolysis degree was in the order HM (64.55%) > HMFAE (63.41%) > pasteurized HMFAE (61.75%) > spray-dried HMFAE (60.57%). After complete gastrointestinal digestion, there were no significant differences in free fatty acid and sn-2 monoacylglycerol profile among the HMFAE, pasteurized HMFAE, and spray-dried HMFAE. CONCLUSION: Milk powder processing can reduce lipolysis by altering the lipid droplet structure of HMFAE and the degree of lipid droplet aggregation during digestion. © 2024 Society of Chemical Industry.

Safflower protein as a potential plant protein powder: optimization of extraction and spray-drying process parameters and determination of physicochemical and functional properties.

BACKGROUND: The research about sustainable and alternative plant protein sources has accelerated with the increasing need for protein. Safflower meal has a potential to be used in protein production due to its high protein content. This research aimed to produce an alternative plant-based protein powder using safflower meal. Both extraction and spray-drying parameters of safflower protein powder production were optimized using response surface methodology to achieve maximum yield. Moreover, the physicochemical and functional properties of safflower protein were determined and compared with those of commercial protein powders (soy, sunflower, pea, fava bean, and rice). RESULTS: The optimum extraction conditions were found to be 33.06:1 mL-1 g solvent-to-meal ratio, pH 11.00, 23.34 °C extraction temperature, and 30.86 min extraction time, which were achieved with a protein yield response of 75.21%. The highest powder yield (51.28%) was recorded for drying conditions of inlet air temperature of 160.11 °C, aspiration rate of 54.17 m3 h-1, and feed flow rate of 16.01 mL min-1. According to the amino acid profile of safflower protein, the glutamic acid content (14 475 mg (100 g)-1) was highest, while the methionine content (96 mg (100 g)-1) was lowest. Moreover, safflower protein can be regarded as a high-quality protein due to its high essential amino acid ratio (41.55%). The experiments showed that safflower protein had high solubility and good foam and emulsifying properties. CONCLUSION: Safflower protein could be a nutritional and functional protein source for the food industry. © 2024 Society of Chemical Industry.

Efficiency of freeze- and spray-dried microbial preparation as active dried starter culture in kombucha fermentation.

BACKGROUND: Kombucha is a widely consumed fermented beverage produced by fermenting sweet tea with a symbiotic culture of bacteria and yeast (SCOBY). The dynamic nature of microbial communities in SCOBY may pose challenges to production scale-up due to unpredictable variations in microbial composition. Using identified starter strains is a novel strategy to control microorganism composition, thereby ensuring uniform fermentation quality across diverse batches. However, challenges persist in the cultivation and maintenance of these microbial strains. This study examined the potential of microencapsulated kombucha fermentation starter cultures, specifically Komagataeibacter saccharivorans, Levilactobacillus brevis and Saccharomyces cerevisiae, through spray-drying and freeze-drying. RESULTS: Maltodextrin and gum arabic-maltodextrin were employed as carrier agents. Our results revealed that both spray-dried and freeze-dried samples adhered to physicochemical criteria, with low moisture content (2.18-7.75%) and relatively high solubility (65.75-87.03%) which are appropriate for food application. Freeze-drying demonstrated greater effectiveness in preserving bacterial strain viability (88.30-90.21%) compared to spray drying (74.92-78.66%). Additionally, the freeze-dried starter strains demonstrated similar efficacy in facilitating kombucha fermentation, compared to the SCOBY group. The observations included pH reduction, acetic acid production, α-amylase inhibition and elevated total polyphenol and flavonoid content. Moreover, the biological activity, including antioxidant potential and in vitro tyrosinase inhibition activity, was enhanced in the same pattern. The freeze-dried strains exhibited consistent kombucha fermentation capabilities over a three-month preservation, regardless of storage temperature at 30 or 4 °C. CONCLUSION: These findings highlight the suitability of freeze-dried starter cultures for kombucha production, enable microbial composition control, mitigate contamination risks and ensure consistent product quality. © 2024 Society of Chemical Industry.

Solid self-microemulsifying drug delivery system (S-SMEDDS) prepared by spray drying to improve the oral bioavailability of cinnamaldehyde (CA).

The aim of this study was to prepare a solid self-microemulsifying drug delivery system (S-SMEDDS) of cinnamaldehyde (CA) by spray drying technique to improve the oral bioavailability of CA. The preparation of CA S-SMEDDS with maltodextrin as the solid carrier, a core-wall material mass ratio of 1:1, a solid content of 20% (w/v), an inlet air temperature of 150 °C, an injection speed of 5.2 mL/min, and an atomization pressure of 0.1 MPa was determined by using the encapsulation rate as the index of investigation. Differential scanning calorimetry (DSC) revealed the possibility of CA being encapsulated in S-SMEDDS in an amorphous form. The in-vitro release showed that the total amount of CA released by S-SMEDDS was approximately 1.3 times higher than that of the CA suspension. Pharmacokinetic results showed that the relative oral bioavailability of CA S-SMEDDS was also increased to 1.6-fold compared to CA suspension. Additionally, we explored the mechanism of CA uptake and transport of lipid-soluble drugs CA by S-SMEDDS in a Caco-2/HT29 cell co-culture system for the first time. The results showed that CA S-SMEDDS uptake on the co-culture model was mainly an energy-dependent endocytosis mechanism, including lattice protein-mediated endocytosis and vesicle-mediated endocytosis. Transport experiments showed that CA S-SMEDDS significantly increased the permeability of CA in this model. These findings suggested that CA S-SMEDDS is an effective oral solid dosage form for increasing the oral bioavailability of lipid-soluble drug CA.

Surface Solid Dispersion of Ketoconazole on Trehalose Dihydrate using Spray Drying to Achieve Enhanced Dissolution Rate.

Ketoconazole (K) is a poorly water-soluble drug that faces significant challenges in achieving therapeutic efficacy. This study aimed to enhance the dissolution rate of ketoconazole by depositing spray-dried ketoconazole (SK) onto the surface of ground trehalose dihydrate (T) using spray drying. Ketoconazole-trehalose surface solid dispersions (SKTs) were prepared in ratios of 1:1 (SK1T1), 1:4 (SK1T4), and 1:10 (SK1T10), and characterized them using particle size analysis, scanning electron microscopy, powder X-ray diffraction, and in vitro dissolution studies. Results showed that the dissolution rates of the dispersions were significantly higher than those of pure ketoconazole, with the 1:10 ratio showing the highest dissolution rate. The improved dissolution was attributed to the formation of a new crystalline phase and better dispersion of ketoconazole particles. These findings suggest that the surface solid dispersion approach could be a valuable method for enhancing the bioavailability of poorly water-soluble drugs.

Design of Experiments-Driven Optimization of Spray Drying for Amorphous Clotrimazole Nanosuspension.

This study employed a Quality by Design (QbD) approach to spray dry amorphousclotrimazole nanosuspension (CLT-NS) consisting of Soluplus® and microcrystallinecellulose. Using the Box-Behnken Design, a systematic evaluation was conducted toanalyze the impact of inlet temperature, % aspiration, and feed rate on the criticalquality attributes (CQAs) of the clotrimazole spray-dried nanosuspension (CLT-SDNS). In this study, regression analysis and ANOVA were employed to detect significantfactors and interactions, enabling the development of a predictive model for the spraydrying process. Following optimization, the CLT-SD-NS underwent analysis using Xraypowder diffraction (XRPD), Fourier transform infrared spectroscopy (FTIR), Dynamic Scanning Calorimetry (DSC), and in vitro dissolution studies. The resultsshowed significant variables, including inlet temperature, feed rate, and aspiration rate,affecting yield, redispersibility index (RDI), and moisture content of the final product. The models created for critical quality attributes (CQAs) showed statistical significanceat a p-value of 0.05. XRPD and DSC confirmed the amorphous state of CLT in theCLT-SD-NS, and FTIR indicated no interactions between CLT and excipients. In vitrodissolution studies showed improved dissolution rates for the CLT-SD-NS (3.12-foldincrease in DI water and 5.88-fold increase at pH 7.2 dissolution media), attributed torapidly redispersing nanosized amorphous CLT particles. The well-designed studyutilizing the Design of Experiments (DoE) methodology.

Optimization of Hypericum Perforatum Microencapsulation Process by Spray Drying Method.

Hypericum perforatum (HP) contains valuable and beneficial bioactive compounds that have been used to treat or prevent several illnesses. Encapsulation technology offers protection of the active compounds and facilitates to expose of the biologically active compounds in a controlled mechanism. Microcapsulation of the hydroalcoholic gum arabic and maltodextrin have hot been used as wall materials in the encapsulation of HP extract. Therefore, the optimum microencapsulation parameters of Hypericum perforatum (HP) hydroalcoholic extract were determined using response surface methodology (RSM) for the evaluation of HP extract. Three levels of three independent variables were screened using the one-way ANOVA. Five responses were monitored, including total phenolic content (TPC), 2,2-Diphenyl-1-picrylhydrazyl (DPPH), carr index (CI), hausner ratio (HR), and solubility. Optimum drying conditions for Hypericum perforatum microcapsules (HPMs) were determined: 180 °C for inlet air temperature, 1.04/1 for ratio of maltodextrin to gum arabic (w/w), and 1.98/1 for coating to core material ratio (w/w). TPC, antioxidant activity, CI, HR, and solubility values were specified as 316.531 (mg/g GAE), 81.912%, 6.074, 1.066, and 35.017%, respectively, under the optimized conditions. The major compounds of Hypericum perforatum (hypericin and pseudohypericin) extract were determined as 4.19 µg/g microcapsule and 15.09 µg/g microcapsule, respectively. Scanning electron microscope (SEM) analysis revealed that the mean particle diameter of the HPMs was 20.36 µm. Based on these results, microencapsulation of HPMs by spray drying is a viable technique which protects the bioactive compounds of HP leaves, facilitating its application in the pharmaceutical, cosmetic, and food industries.