Loss of attachments in patients during orthodontic therapy with clear aligners: A prospective clinical study.

OBJECTIVE: This study aimed to assess the loss rate of attachments and investigate its probable influencing factors in patients during orthodontic therapy with clear aligners. MATERIALS AND METHODS: A total of 55 patients treated with clear aligners were enrolled in this prospective clinical study. The loss rate of attachments was evaluated after a 6-month follow-up since the initial bonding was finished. The attachment survival curves were gone through Kaplan-Meier estimates. The Cox regression model with shared frailty was conducted to evaluate the hazard ratios (HRs) for the following factors, including sex, age, dental malocclusion, vertical skeletal pattern, anterior overbite, operators, tooth extraction, attachment amount, arch, tooth position and attachment type. RESULTS: There were a total of 47 patients (14 males and 33 females; and mean age: 26.77 ± 8.45) in which 722 attachments were involved in the final analysis. During the 6-month follow-up, 99 attachments were lost by 40 participants. The overall loss rate was 13.7%. The loss of attachments was more common in the early months of therapy. During the first 2 months, 71 attachments were lost. The loss rate of attachments was not significantly affected by sex, age, dental malocclusion, vertical skeletal pattern, anterior overbite, operators, tooth extraction, attachment amount and attachment type (P > 0.05). The loss rate of mandibular attachments was 1.8 times that of maxillary attachments (HR = 1.8; 95% CI: 1.2-2.8; P = 0.009). The loss rate of molar attachments was 5.5 times that of incisor attachments (HR = 5.5; 95% CI: 1.6-19; P = 0.007). CONCLUSION: During the first 6 months, the overall loss rate of attachments was 13.7%. In the early months of therapy, loss of attachments was more common. The loss rate decreased as treatment time increased. Loss of attachments was significantly affected by arch and tooth position, with higher loss rates in the mandibular arch and molars. Besides, loss of attachments was not affected by sex, age, dental malocclusion, vertical skeletal pattern, anterior overbite, operators, tooth extraction, attachment amount and attachment type.

Effect of functional appliances on sleep-disordered breathing in Class II division 1 malocclusion children: Randomized controlled trial.

OBJECTIVES: A randomized controlled trial was undertaken to investigate the orthopaedic effect of functional appliances on the pharyngeal airway space and nocturnal breathing of children with skeletal class II due to mandibular retrusion. MATERIALS AND METHODS: Forty patients were randomized into a 1:1 ratio study (Twin block) group and a control (fixed appliance) group. Each group included equal numbers of boys and girls. Diagnosis with sleep-disordered breathing was not an inclusion criterion. The duration of the trial was 12 months (T0 - T12). Eligibility criteria included skeletal Class II division 1 malocclusion with mandibular retrognathism, SNA ≥82, SNB ≤78, ANB ≥4, overjet ≥6 mm, and patients in circumpubertal stage CVM2 and CVM3. The main outcomes were pharyngeal airway volume, oxygen desaturation index (ODI), and maximum expiratory pressure (MEP), while the secondary outcomes were skeletal and dental changes of the maxilla and mandible. Randomization was accomplished with random blocks of 20 patients with allocation concealed in sequentially numbered, opaque, and sealed envelopes. Blinding was only applicable for data analysis of radiographic measurements and data extracted from the pulse oximeter. RESULTS: The mean age of the patients was 10 ± 1.5 and 10 ± 1.2 at (T0) for the Twin Block and the control groups, respectively. The changes in the oropharyngeal (2.66 cc and 0.056; P = .03) and nasopharyngeal (1.3 cc and 0.84; P = .053) airway volumes for the Twin block and control groups, respectively, were significantly different for the oropharynx. There was a significant decrease in ODI by [median -3.55 (-5.05 to 0.50); P ≤ .001] and a significant increase [median 45 (0.0-110); P ≤ .001] in MEP for the Twin block group. A significant inverse correlation (r = -.589; P = .006) could be found between the total volume of the oropharynx and ODI. No serious harm was observed. CONCLUSIONS: The Twin block group showed significant change in oropharyngeal airway volume and improvement of nocturnal breathing. REGISTRATION: This trial was registered at https://www. CLINICALTRIALS: gov, registration number NCT04255511.

Long-term stability of curve of Spee depth among orthodontically treated patients: A retrospective longitudinal study.

OBJECTIVE: The curve of Spee is deemed important characteristic of the dentition for a balanced occlusion and distribution of masticatory forces, while orthodontic levelling of an accentuated curve of Spee is generally included as a treatment goal for deepbite correction. However, relapse is often seen and can be problematic. METHODS: A retrospective longitudinal study of predominantly young patients with a deep curve of Spee, who had been treated orthodontically with 0.018"-slot Edgewise fixed appliances, was performed. The depth of the curve of Spee was digitally measured before treatment (T1), at debond (T2), and an average of 7 years post-debond (T3) and analysed statistically at 5%. RESULTS: A total of 157 patients were included (56.7% female; 11.6-year-old at T1), 16.6% of which were treated with premolars extractions. Non-extraction treatment reduced the curve of Spee at the first premolar from 1.87 mm (T1) to 0.22 mm (T2), which relapsed 0.12 mm (T3; P = .04). The respective depths for the second premolar were 2.0 mm (T1), reduced to 0.80 mm (T2). No significant relapse was seen for the second premolar (0.08 mm; P > .05) or the first permanent molar (0.06 mm; P > .05). No overall significant differences in absolute relapse were seen between extraction and non-extraction patients, but premolar extractions were associated with less clinically relevant relapse at the first molar (odds ratio 0.27; 95%-confidence interval 0.08-0.88; P = .003). CONCLUSION: Steep curves of Spee can be satisfactorily levelled orthodontically with satisfactory stability in the long term, while premolar extractions might be associated with less relapse.

Noninvasive conservative management of anterior open bite treated with TADs versus clear aligner therapy.

OBJECTIVES: Anterior open bite can be treated non-surgically via molar intrusion using temporary skeletal devices (TAD). Clear aligner therapy (CAT) is recognized as a viable therapeutic modality for non-extraction treatment of adults with mild open bite. This study aimed to compare the treatment effect and mechanisms of open bite closure between patients treated with braces and TADs double arch intrusion and those treated with CAT. Treatment success at T3 was based on 1- positive overbite on ceph; 2- Change in the vertical dimension 3- post treatment POSI score equal to zero. MATERIAL AND METHODS: The TAD group includes 18 consecutively treated patients from the main author. The CAT group consisted of 16 selected patients from three different orthodontists. The observation time points were as follows: pretreatment (T1), end of molar intrusion and positive overbite achieved (T2), end of treatment (T3), at least 6-month follow-up (T4). Treatment changes were assessed by cephalometric analysis and frontal intraoral photo. RESULTS: At the end of treatment, 100% of the patient of the TAD group and 78,6% of the CAT group had a posi score of 0. The TAD group showed a significant reduction in vertical measurements (SN-MPA: -1,55° ± 0.41, LAFH: -3,05 ± 0.51 mm, U6-PP: -1.48 ± 0.30 mm), but the CAT group did not have significant changes for these variables. Both groups had significant increases in overbite from T1 to T3 (TAD: 4,32 ± 0,5 mm; CAT: 2,33 ± 0.56 mm), and overbite remained stable at T4. The CAT group did not have a significant upper molar intrusion, but a significant extrusion of 1.22 ± 0.42 mm of the lower incisor occurred. CONCLUSION: The TAD group achieved bite closure by upper molar intrusion, lower molar and incisors vertical control, and mandibular plane counterclockwise rotation, resulting in an improved AP and vertical relationship. The CAT group achieved bite closure through the lower incisor extrusion without significant change in the vertical dimension. CLINICAL RELEVANCE: This study provides relevant information about the skeletal and dental changes of open bite treatment with TADs double arch intrusion. The comparison with a control group treated with CAT confirms known information.

Orthodontic correction of acquired open bite with TMJ degeneration: A retrospective study of outcomes and stability.

BACKGROUND/PURPOSE: Newly developed temporary anchorage devices (TADs) serve a strong orthodontic anchorage to intrude molars for correction of anterior open bite (AOB). We measured cephalometric changes in skeletal open bite patients which developed subsequently to temporomandibular joint disorders with bilateral point contacts at terminal molars. METHODS: We retrospectively recruited 32 patients who had been treated their TMD before orthodontic correction (overbite: -3.14 ± 1.86 mm). Partial orthodontic appliances were used to intrude posterior teeth using TADs until positive OB obtained (T1). Full fixed appliances were then used to achieve proper overjet and overbite (T2). We collected lateral cephalograms before (T0), during (T1) and after (T2) treatment, and at follow-ups (T3). Using ANOVA, we analyzed the differences among these time points to determine treatment changes and stability of orthodontic results. RESULTS: In this group predominantly comprising young adult women, orthodontic treatment with TADs significantly reduced upper posterior dental heights (T2-T0:-1.84 ± 0.66 mm) and facilitated the retraction and uprighting upper incisors (T2-T0: -9.92 ± 1.72°), to achieve appropriate OJ (T2-T0: -3.21 ± 0.49 mm) and OB (T2-T0: 4.10 ± 0.28 mm) with p < 0.05. Except upper posterior dental height, most of cephalometric changes including OJ, OB, and upper incisal axis remained significant at follow-ups with retention time of 3.7 ± 2.6 years. Only three out of 30 patients experienced small amount of open bite at T3. CONCLUSION: Orthodontic correction of OJ remained relatively stable among 90 % of patients with TMJ degeneration by intrusion via TADs. This modern but conservative orthodontic approach can improve occlusal functions in skeletal open bites.

Oro-facial function and quality of life in children and adolescents with large horizontal maxillary overjet-A case-control study.

BACKGROUND: Large horizontal maxillary overjet (overjet) is associated with reduced bite force (BF) and number of contacts, which influence the chewing effectivity (CE). Oral health, oro-facial function (OF) and malocclusion have great impact on psychological well-being and quality of life (QoL). OBJECTIVES: The aims of the study were to examine OF, temporomandibular disorders (TMD), BF, CE, QoL and well-being in children and adolescents with large overjet. METHODS: The study was a case-control study including healthy children with large overjet in the study group compared to a control group of healthy children with neutral occlusion, all 9-14 years old. OF was examined by use of Nordic Orofacial Test-Screening (NOT-S), Diagnostic Criteria for Temporomandibular Disorders (DC/TMD) and registration of morphological and functional occlusion. QoL and well-being were examined using KIDSCREEN-10 and Strengths and Difficulties Questionnaire. RESULTS: The study and control groups included 37 and 32 participants, respectively. Significantly increased NOT-S score (p < .001) and reduced BF (p = .011), numbers of contacts (p < .001) and CE (p = .005) were found in the study group. BF, numbers of contacts and CE were negatively associated with erupting canines and premolars. No significant difference was found in age, gender, dental eruption, TMD diagnosis or QoL between the groups. Significantly increased emotional symptoms (p = .007), hyperactivity (p = .043) and total difficulties score (p = .009) were found in the study group. CONCLUSION: The study group showed higher NOT-S score and reduced BF, number of contacts and CE. No difference in QoL were found between the groups, although reduced well-being and increased emotional symptoms, hyperactivity and total difficulties were found in the study group.

Risk factors associated with traumatic dental injuries in individuals with special healthcare needs-A systematic review and meta-analysis.

BACKGROUND/AIM: Individuals with special healthcare needs (SHCN) are more likely to sustain traumatic dental injuries (TDIs) due to distinct risk factors. The aim of this review was to assess various risk factors associated with TDIs in individuals with SHCN. MATERIALS AND METHODS: The protocol was designed according to the recommendations of the Cochrane-handbook, Joanna Briggs Institute, and the Preferred Reporting Items for Systematic Reviews and Meta-Analyses (PRISMA) guidelines and registered in PROSPERO (CRD42022357422). A comprehensive search was performed in PubMed, LILACS, Web of Science, EMBASE and Scopus using a pre-defined strategy without any limitation of language and year of publication. It was last updated on 25 April 2023. Studies addressing the TDIs in individuals with SHCN were included. Data extraction and analyses were performed, risk of bias (ROB) assessment was done using the Joanna Briggs Institute's critical appraisal tool, and a meta-analysis was performed using random-effects model. RESULTS: A total of 21 studies were included in the review. They were categorized according to the target disease/condition: cerebral palsy (n = 5), ADHD and autism spectrum disorders (n = 5), visually impaired (n = 4), and multiple disorders (n = 7). The studies showed variability in the design and methods; however, 17 out of 21 studies showed moderate to low ROB. Increased overjet and lip incompetence were the main risk factors reported in the studies. The commonest injuries were observed to be enamel and enamel and dentine fractures. CONCLUSION: The overall pooled prevalence of TDI in individuals with special healthcare needs was 23.16% with 20.98% in males and 27.06% in females. Overjet >3 mm and inadequate lip coverage were found to be associated with a higher risk of TDI in all the categories of individuals with special healthcare needs except ADHD and ASD. Falls at home in cerebral palsy, falls while walking and self-harm in ADHD and ASD, falls at home and collision in visual impairment, and unspecified falls in multiple disorders could be identified as the most common cause of TDI.

A comparison of skeletal and dental changes in patients with a Class II relationship treated with clear aligner mandibular advancement and Herbst appliance followed by comprehensive orthodontic treatment.

INTRODUCTION: The objective of this study was to compare the skeletal and dental changes of patients with a Class II relationship treated with clear aligner mandibular advancement (MA) and Herbst appliances followed by comprehensive orthodontic treatment. METHODS: The participants included 20 patients treated with MA and 20 with the Herbst appliance. Orthodontic records were taken before treatment, after the functional appliance, and completion of phase II treatment. The skeletal and dental changes across the 3-time periods were evaluated using a matched paired t test for each treatment. A 2-sample t test was used to examine the changes across periods between 2 treatment groups (P <0.05). RESULTS: Significant reduction in overjet, overbite, and change in molar relationship were obtained by both appliances with similar skeletal and dental contributions. This was contributed by a forward movement of the mandible and mandibular molars, backward movement of the maxillary molars, and retraction of the maxillary incisors. After phase II treatment, both appliances could maintain the skeletal and dental changes achieved during the advancement phase. Greater change in overbite (2.4 mm vs 1.4 mm), an eruption of maxillary incisors (0.9 mm vs 0.1 mm), and proclination of mandibular incisors were found with the Herbst group (3.9° vs -2.1°). The average total treatment time was similar with the 2 appliances. CONCLUSIONS: Both functional appliances were equally effective in reducing the overjet and overbite and achieving a Class I molar relationship with a similar length of treatment time. The Herbst design lacked control of the mandibular incisor proclination, and clear aligners offered better vertical control and management of the mandibular incisor inclination.

The skeletal and dental effects of Hanks Herbst versus twin block appliances for class II correction in growing patients: a randomized clinical trial.

BACKGROUND: Despite the popularity of the Twin Block (TB) and the Hanks Herbst (HH) functional appliances, there is limited prospective research comparing these removable and fixed designs, respectively. OBJECTIVES: To evaluate and compare the skeletal and dental effects associated with TB and HH functional appliances as well as to detect factors that might influence the success or failure of treatment in adolescents with Class II malocclusion. DESIGN AND SETTING: A parallel-group randomized controlled trial was undertaken in a single-centre hospital in the United Kingdom. METHODS: A total of 80 participants (aged 10-14 years) with overjet of 7 mm or more were randomized to receive either the HH or TB appliance. Cephalometric radiographs were collected at the start of the study and immediately after the withdrawal of the functional appliances and measured using Pancherz analysis. Participants were allocated to the TB or HH group, based on an electronic randomization, stratified for gender and allocation concealed. Blinding to the allocated arm was not possible. However, all data were coded and anonymized to ensure that assessors were blinded to the group allocation. The main outcome was the anterior-posterior skeletal and dento-alveolar changes at the end of the functional phase. RESULTS: Fifteen (37.5%) participants from the TB group and 7 (15.5%) from HH failed to achieve full overjet reduction (<4 mm) after 12 months of treatment. Overjet reduction was 2 mm greater with HH compared to TB (P = .05; 95% CI: 0.2, 3.2). No significant differences regarding skeletal and dental changes were reported, with the exception that participants in HH group experienced greater lower molar protraction (P = .002; 95% CI: -2.8, -0.8) and mandibular incisors advancement (P = .001; 95% CI: -2.9, -1), indicating greater dental than skeletal effects. CONCLUSION: The TB appliance was associated with a higher rate of treatment discontinuation. No significant clinical differences were observed in the skeletal and dental effects, although the HH may be associated with more pronounced effects on the mandibular dentition. CLINICAL TRIAL REGISTRATION: The protocol was registered online before the start of the trial (ISRCTN11717011).

Digital analyses of Bolton tooth size ratios and their association to gender, angle class, and other occlusal traits: a study using a partially automated digital 3D model analysis.

BACKGROUND: This study aims to verify Bolton's values for tooth size ratios and to evaluate possible relationships to different occlusal traits using precise digital measurement methods. MATERIALS AND METHODS: Including 1000 consecutively selected patients from three study centres a digital, partially automated model analysis was performed utilizing the software OnyxCeph. The measurements comprised tooth width for calculation of anterior (AR) and overall ratio (OR) as a percentage, arch width, length, perimeter, overjet, overbite, space analysis in millimetre and the assessment of the angle classification. RESULTS: AR and OR were significantly increased compared to Bolton's ratios of 77.2% (AR) and 91.3% (OR). In the gender comparison, male patients showed larger tooth size ratios, especially in the OR. Patients with Angle Class II/1 and II/2 had smaller tooth size ratios than patients with Angle Class III and I. Thus, patients with Angle Class II/1 had the largest tooth diameters in all maxillary teeth and with Angle Class II/2 the smallest tooth sizes in the mandible. The largest tooth widths in the lower jaw were observed in the Angle Class III patient group. Furthermore, a negative correlation from AR/OR to overjet, overbite, and available space in lower jaw as well as a positive correlation to available space in upper jaw was detected. CONCLUSIONS: There is a clear correlation between the tooth size ratios and the present dysgnathia as well as other orthodontically relevant occlusal traits. This prior knowledge about our patients is extremely important to create an individualized treatment plan and enable sufficient occlusion. To achieve a functionally good occlusion with correct overjet and overbite, it is essential that the maxillary and mandibular teeth are proportional in size. Any deviation from the ideal patient in terms of tooth size, number, shape, or arch must be considered in the pre-therapeutic treatment plan in combination with the existing dysgnathia in order to be able to achieve a stable anterior and posterior occlusion with appropriate adjustments to the therapy post-therapeutically.

Does aligner refinement have the same efficiency in deep bite correction?: A retrospective study.

BACKGROUND: Refinements are very common in clear aligner treatments. The aim of this study is to assess whether the predictability of deep overbite correction is similar over several refinements using clear aligners (Invisalign, Align Technology, San Jose, Calif) and examine the accuracy of vertical movement and inclination change of individual teeth. METHODS: This retrospective study included 20 deep bite patients (7M and 13F; 32.63 ± 11.88 years old; an initial overbite of 5.09 ± 0.98 mm), consecutively treated from September 2016 and March 2023, who completed at least two sets of aligners, including refinements. The initial, predicted, and achieved models were exported from ClinCheck or OrthoCAD (Cadent Inc, Carlstadt, NJ) and superimposed via best-fit surface-based registration using SlicerCMF (version 4.9.0; cmf.slicer.org). We also examined 15 out of 20 patients who completed treatments. The overbite correction and changes in vertical movement and inclination for individual teeth were measured. Descriptive statistics and a paired t-test or Wilcoxon signed-rank test were performed. P < 0.05 was considered statistically significant. RESULTS: The mean accuracy of overbite correction was 37.63% after 1st set, followed by 11.19%, 6.32%, and 13.80% (2nd-4th sets), respectively. There were statistically significant differences between the predicted and achieved vertical movements and inclination changes for all teeth for the 1st and 2nd sets. For the completed cases, the mean overbite correction was 38.54% compared to the initially planned overbite correction, which is similar to one of the 1st set. Still, the vertical movements and inclination changes of all teeth present statistically significant differences between the initially planned and finally achieved movements except for maxillary lateral incisor torque. CONCLUSIONS: The most overbite correction occurs during the 1st set of aligners, and refinement treatment does not significantly improve the deep bite correction.

Analysis of prefabricated myofunctional appliances with different overjet and bumper designs: a three-dimensional finite element analysis.

BACKGROUND: Prefabricated myofunctional appliance can guide tooth eruption, improve dentition alignment, correct myofunctional disorders and harmful oral habits. However, its application to skeletal discrepancy may result in unsatisfactory tooth inclination. This study aimed to construct a novel appliance with overjet design to avoid this side effect and investigated its shape and mechanical changes under occlusion using three-dimensional finite element method. METHODS: We established three samples of prefabricated myofunctional appliances. The first one was edge to edge without overjet, and the outer shield of both jaws were flattened. The second one was 3 mm overjet with stepped the outer shield. The last one was 3 mm overjet, and the outer shield of both jaws were flatted, which meant the front wall of lower jaw was strengthened with bumper, termed as lower bumper. A complete dentition model was applied to the study. 150 N occlusal force was applied to each type of appliance and the deformation displacement and the changes in stress was recorded. RESULTS: The deformation was significant in the incisors regions, especially in the vertical and lateral dimensions. The maximum displacements of 3 mm overjet with step shield group were 7.08 mm (vertical), 3.99 mm (lateral), and 2.90 mm (sagittal), while it decreased to 3.92 mm(vertical), 1.94 mm (lateral), and 1.55 mm (sagittal) in overjet with bumper group. Moreover, the upper molar regions exhibited higher vertical and sagittal displacement in 3 mm overjet with step shield group, which were 3.03 mm (vertical) and 1.99 mm (sagittal), and the bumper design could decrease the maximum displacement to 1.72 mm (vertical) and 0.72 mm (sagittal). In addition, the Von Mises stress of appliances was analyzed, and results indicated that 3 mm overjet with step shield generated higher stress than other groups, with the maximum Von Mises stress was 0.9387 MP, which were 0.5858 and 0.5657 MP in edge to edge group and 3 mm overjet with lower bumper group, respectively. CONCLUSION: The prefabricated myofunctional appliances may cause deformation during occlusion. Compared to step shield group, the application of lower bumper exhibited better resistance to occlusal force.

Evaluating malocclusion patterns in children with autism spectrum disorder using the index of complexity, outcome and need: a cross-sectional study.

BACKGROUND: The purpose of this study was to evaluate the complexity of malocclusion and existing patterns in children with autism spectrum disorders (ASD) using the index of complexity, outcome and need (ICON). METHODS: This cross-sectional study included children diagnosed with ASD, aged 9-15 years. A group of healthy children with the same demographic characteristics was randomly selected as the control group. Malocclusion was assessed according to ICON scoring protocol. The following parameters were recorded: dental aesthetics, upper arch crowding/spacing, presence of crossbite, anterior-vertical relationship (open and deep bite) and buccal segment anterior-posterior relationship. Finally, an overall ICON score was derived and reported for each patient. Descriptive analysis was performed for all investigated variables. Significance level was set at p < 0.05. RESULTS: A total of 324 children, divided into ASD (162) and control (162) groups, comprised the study population. Our results demonstrated that the average overall ICON score was significantly higher in the ASD group compared to the control group (38.77 vs. 27.43, p < 0.001). ASD children also obtained significantly higher scores regarding the dental aesthetics component (3.84 vs 2.78, p < 0.001). Study groups were significantly different in terms of the prevalence of incisor overbite and open bite (p = 0.002 and p < 0.001, respectively). Patients in the ASD group showed a higher prevalence of Class II and Class III malocclusions (p < 0.001). CONCLUSION: ASD children obtained significantly higher overall ICON scores, indicating more complex and severe malocclusions. These children also exhibited a greater tendency towards Class II and III malocclusions.

Factors affecting unusual postoperative vertical downward movement of mandible after surgery-first approach using intraoral vertical ramus osteotomy.

BACKGROUND: In very rare cases, patients who have undergone surgery-first approach with intraoral vertical ramus osteotomy (IVRO) exhibit unusual downward movements of mandible even up to 1-year post surgery, which makes it difficult for orthodontists to stabilize the occlusion during the postoperative orthodontic period. The aim of this study was to identify factors affecting the unusual downward movement of the mandible 1-year after the surgery-first approach using IVRO, while focusing on cephalometric values. METHODS: This retrospective cohort study sample was divided into two groups based on the amount of vertical movement of the B-point 1-year post surgery (Group S, predictable upward movement; Group U, unpredictable downward movement greater than 2 mm). To evaluate cephalometric changes between the two groups, cephalograms were obtained before surgery, 1 day after surgery, 1 month after surgery, and 1 year after surgery. The data were analyzed using the independent t-test, Mann-Whitney U test with Bonferroni correction, Pearson correlation analysis, and multiple regression analysis. RESULTS: At the initial examination, Group U showed a shallower anterior overbite. The vertical surgical change in the B-point was statistically different between the two groups (p < 0.001), indicating that group U exhibited more upward movement of the mandible during surgery. Group U showed significant downward movement of the mandible 1 month after surgery, and this finding persisted until 1 year postoperatively. Clockwise rotation of the mandible was also observed. Surgical vertical movement of the B-point showed a strong correlation with postoperative vertical movement of mandible (r = -0.674; p < 0.001) along a linear relationship, indicating that the amount of postoperative vertical downward movement of the mandible increased as the amount of surgical upward movement of the B-point increased (R2 = 0.449; p < 0.001). CONCLUSIONS: This study revealed that unusual downward movement of the mandible after a surgery-first approach using IVRO is correlated with the amount of upward movement during the surgery. When planning surgery, in cases in which a significant upward movement of the mandible is anticipated, orthodontists should prepare for the possibility of subsequent unusual downward movement and a tendency for the anterior overjet to decrease during the postoperative orthodontic period.

Skeletal, dentoalveolar and soft tissue changes after stabilization splint treatment for patients with temporomandibular joint disorders.

BACKGROUND: Temporomandibular disorder (TMD) is a grouping of heterogeneous disorders with multifactorial origins. Stabilization splints (SS) have demonstrated an acceptable treatment effect in TMD. The possible changes at the skeletal, dental, and soft tissue levels need to be addressed to evaluate the benefit/risk ratio of this therapeutic procedure. Accordingly, this study aimed to three­dimensionally evaluate skeletal, dentoalveolar and soft tissue changes after SS treatment for patients with TMD. METHODS: This retrospective study included 74 adult patients with myofascial and/or intra-articular disorders (25 males and 49 females), with an average age of 22.88 ± 4.8 years, who underwent SS treatment. Pre- and post-treatment Cone beam computed tomography were analysed using Invivo 6.0.3 software. The primary outcome was the vertical skeletal and dentoalveolar changes, while the secondary outcomes were the anteroposterior skeletal, dentoalveolar and soft tissue changes. Paired t-test and Wilcoxon rank sum test were used for statistical analyses. RESULTS: For the primary outcome; skeletally, there was a significant increase in mandibular plane inclination (difference: 0.82°±1.37), decrease facial height ratio (difference: 0.45%±1.07) and at the dentoalveolar level, the inclination of the functional (FOP-SN, FOP-FH) and bisecting (BOP-SN, BOP-FH) occlusal planes exhibited a significant increase too (difference: 0.38 ± 1.43°, 0.49 ± 1.62°, 0.44 ± 1.29° and 0.41 ± 1.17°, respectively) and also a decrease in the overbite (difference: -0.54 ± 0.83). For the secondary outcomes; there was a significant decrease in mandibular position (SNB) (difference: 1.60 ± 1.36°) and increase in the overjet (difference: 0.93 ± 1.04, p < 0.001) and a significant lower lip retrusion (difference: 0.33 ± 1.01 mm p < 0.01), was observed too. CONCLUSIONS: SS therapy resulted in significant vertical skeletal and dentoalveolar changes that were manifested mainly by facial height ratio, mandibular and occlusal plane changes, and to a lesser extent, significant anteroposterior skeletal, dentoalveolar, and soft tissue changes in the form of mandibular position, increased overjet and a more retrusive lower lip. These changes should be considered during patients' selection prior to initiating SS therapy.

A comprehensive national survey on malocclusion prevalence among Palestinian children.

BACKGROUND: This study aims to evaluate the prevalence of malocclusion and orthodontic features among schoolchildren in the West Bank, Palestine. METHODS: A stratified cluster sample of 1278 schoolchildren (620 males, 658 females, mean age 12 years and 5 months (± 0.5)) were examined. Candidates who had not received any previous orthodontic treatment were only included. Dental anomalies like missing and ectopic teeth were recorded. The anteroposterior occlusal relationship was assessed based on Angle classification. Overjet and overbite were measured. Crowding and spacing were recorded subjectively. In addition, crossbite, openbite, and midline displacement were recorded. The chi-square test and descriptive analysis were used statistically. RESULTS: The study found Angle Class I molar relationship in 65%, Class II div 1 in 17%, Class II div 2 in 6%, and Class III in 12% of the sample. An overjet (OJ) of more than 4 mm was present in 17%, and 4% had OJ of more than 6 mm; an OJ of at least 0 mm or less in 36%, and 6% had a reverse OJ. A normal overbite was observed in 53%, while 28% had an increase and 19% had a decreased overbite. An anterior openbite (AOB) was present in 9%, and a scissor bite or anterior crossbite in 6% and 14%, respectively. A posterior crossbite was observed in 12% (9% unilateral and 3% bilateral). Midline displacement was found in (9%). Crowding was observed in 35% and 31% and spacing in 24% and 15% of the maxillary and mandibular arches, respectively. A statistically significant relationship between gender and midline shift, a diastema, spacing in the upper arch, and most dental anomalies was found; males were more affected (p < 0.05). CONCLUSION: This study reported a high prevalence of malocclusion among schoolchildren in Palestine. A collaborative effort should be directed to obtain more monitoring and surveillance of malocclusion more frequently to prevent and control the exacerbation of the problem.

Prevalence and nature of bullying in schoolchildren aged 10-14 years and its association with malocclusion: A cross-sectional study in the South East of the UK.

OBJECTIVE: To investigate the prevalence of, and relationship between, bullying and malocclusion in schoolchildren aged 10-14 years in the South East of the UK. DESIGN: Cross-sectional cohort study. SETTING: Sixteen primary and secondary schools in South East of the UK. PARTICIPANTS: Schoolchildren aged 10-14 years who were consented to participate. METHODS: The prevalence and nature of bullying were measured using a questionnaire. Traits of malocclusion and the need for orthodontic treatment were assessed by clinical examination and determined by the Index of Orthodontic Treatment Need (IOTN) Dental Health (DHC) and Aesthetic components (AC). RESULTS: Complete data were collected for 698 participants. The number defined as being bullied was 68 (9.7%). There was no difference in the prevalence of bullying between gender, ethnicity or age. Higher rates of bullying were reported in mixed sex schools (P = 0.03). Participants with an increased overjet (P = 0.02) and/or a greater need for treatment, as measured by IOTN DHC (P = 0.01) and AC (P = 0.01), reported higher rates of bullying. While there was no difference in the overall prevalence of bullying between genders, boys were more likely than girls to experience physical bullying (P <0.001) and being called names (P = 0.03). CONCLUSION: A significant relationship was evident between being bullied and certain traits of malocclusion.

Evaluation of Mandibular Projection in Class II Division 2 Subjects Following Orthodontic Treatment Using Clear Aligners.

AIM: The purpose of this study was to evaluate the mandibular growth and/or projection following maxillary incisor proclination, overbite correction, and maxillary dentoalveolar expansion without the use of any class II mechanics, in growing class II division 2 patients treated with clear aligners. MATERIALS AND METHODS: Before and after treatment cone-beam computed tomographic (CBCT) generated lateral and posteroanterior cephalograms of thirty-two patients with skeletal class II division 2, 16 in the treatment group and 16 in the untreated group, were reviewed to evaluate treatment-related changes. Upper incisors were proclined and protruded, as well as upper arch expansion and overbite correction were performed as part of their regular treatment. Cephalometric analysis was performed to evaluate skeletal and dental changes. Unpaired statistical t-tests were performed to determine if significant skeletal class II correction was achieved in the treatment group. RESULTS: In the treatment group, after treatment, the upper incisors became more proclined and protruded, and the inter-molar width increased while the overbite was reduced compared to the control group. An increase in skeletal mandibular growth and forward projection was also observed, thus contributing to an improvement of the sagittal skeletal relationship as evidenced by ANB and Wits values compared to the control group. CONCLUSION: A combination of upper incisor proclination, correction of deep overbite, and maxillary dentoalveolar expansion using clear aligners appears to contribute to an improvement of the skeletal class II relationship in growing patients with class II division 2. CLINICAL SIGNIFICANCE: This study shows that unlocking the mandible by correcting a deep overbite, proclining upper incisors, and expanding the upper arch in growing class II division 2 patients can improve skeletal class II using clear aligners. How to cite this article: Mirzasoleiman P, El-Bialy T, Wiltshire WA, et al. Evaluation of Mandibular Projection in Class II Division 2 Subjects Following Orthodontic Treatment Using Clear Aligners. J Contemp Dent Pract 2024;25(4):295-302.

Prevalence of malocclusion and oral health-related factors among pre-school children in Northern Albania.

The aim of the present study was to investigate prevalence and association between malocclusion and caries among pre-school children aged 4-6 years frequenting public kindergartens in Shkodër, the largest city in North Albania. The sample for this descriptive and cross-sectional study included 389 pre-school children aged 4-6 years frequenting 20 public kindergartens in Shkodër, the largest city in North Albania. The participants were divided into two groups according to their caries experience evaluated, as determined by decayed-missing-filled index dmf (World Health Organization criteria) score. Those with dmf score of zero were considered to be free of caries. The prevalence of children with at least one malocclusion trait was 89%. The prevalence of caries was 66% (mean dmf score: 3.63). Increased overbite (43%), followed by increased overjet, were the most prevalent malocclusion traits observed in children with a dmf of zero. Among children with caries, the most prevalent trait was increased overjet (42%) and increased overbite. Almost half of the entire study population had a straight terminal plane and class I canine relationship. There was a similar prevalence of bilateral crossbite. Significant changes (p = 0.008) were observed between the groups with regards to the absence of spacing in the maxillary anterior region. Regression analysis further revealed that children with an absence of maxillary spacing were 2.564-fold more likely to have caries; those with a deepbite were 0.814-fold more likely to have caries. More than half of the children had caries. Increased overjet, overbite, crossbite and maxillary crowding were malocclusion traits observed in the population included in this study. A positive association was identified between maxillary crowding, deepbite and caries. The association between malocclusion and caries, highlights the necessity for an increased awareness of these two conditions that are commonly found among children of pre-school age.

Occlusal characteristics and oral health-related quality of life in adults operated due to sagittal synostosis in childhood: a case-control study with 26 years of follow-up.

PURPOSE: The aim of this case-control study was to investigate occlusal characteristics, received orthodontic treatment, oral health-related quality of life (OHRQoL), and satisfaction with dental esthetics in adults operated due to sagittal synostosis. METHODS: The study group consisted of 40 adults (25 males, 15 females, mean age 27.4 years, range 18-41) who were operated due to isolated sagittal synostosis in childhood. The control group comprised 40 age and gender-matched adults. Occlusal characteristics were evaluated clinically during study visits. Information on the previous orthodontic treatment was collected from dental records. OHRQoL was measured using the 14-item Oral Health Impact Profile (OHIP-14), and satisfaction with dental esthetics was evaluated using a visual analogue scale. RESULTS: No statistically significant differences were found between the patient group and the controls in malocclusion traits (overjet, overbite, molar relationships, crossbite, scissor bite), previous orthodontic treatment, pre-treatment malocclusion diagnoses, OHIP variables, or satisfaction with dental esthetics. However, there was a tendency toward increased overjet and overbite in scaphocephalic patients. CONCLUSION: It seems that adults with scaphocephaly operated in childhood do not differ from the average population in terms of occlusion, received orthodontic treatment, or oral health-related well-being.