Morphological-metabolic analysis in Streptomyces rimosus microparticle-enhanced cultivations (MPEC).

Streptomyces produce a broad spectrum of biologically active molecules such as oxytetracycline and rimocidin, which are widely used in human and animal treatments. microparticle-enhanced cultivation (MPEC) is one of the tools used for Streptomyces bioprocesses intensification by the control of mycelial morphology. In the present work, morphological changes of Streptomyces rimosus caused by the addition of 10 µm talc microparticles in MPEC were correlated with the biosynthetic activity of the microorganism. Comparing the runs with and without microparticles, major morphological changes were observed in MPEC, including the deformation of pellets, variation of their size, appearance of hyphae and clumps as well as the aggregation of mycelial objects. The presence of talc microparticles also influenced the levels of the studied secondary metabolites produced by S. rimosus. Comparing control and MPEC runs, the addition of talc microparticles increased the amounts of oxytetracycline (9-fold), 2-acetyl-2-decarboxamido-oxytetracycline (7-fold), milbemycin A3+4[O] (3-fold) and CE 108 (1.5-fold), while rimocidin (27-ethyl) and milbemycin ß11+4[O] production was reduced. In summary, the addition of talc microparticles to S. rimosus cultivations led to the development of smaller morphological forms like hyphae and clumps as well as to the changes in the amounts of secondary metabolites.

A review of the mesotheliogenic potency of cleavage fragments found in talc.

It has long been recognized that amphibole minerals, such as cleavage fragments of tremolite and anthophyllite, may exist in some talc deposits. We reviewed the current state of the science regarding the factors influencing mesotheliogenic potency of cleavage fragments, with emphasis on those that may co-occur in talc deposits, including dimensional and structural characteristics, animal toxicology, and the most well-studied cohort exposed to talc-associated cleavage fragments. Based on our review, multiple lines of scientific evidence demonstrate that inhaled cleavage fragments associated with talc do not pose a mesothelioma hazard.

Enhancement of schizophyllan production in Schizophyllum commune using microparticles in medium.

Schizophyllum commune is a wood-rotting filamentous fungus that secrets a homopolysaccharide called as schizophyllan. Schizophyllan has several applications such as enhanced oil recovery, pharmaceutical materials and an anti-cancer drug carrier. Biomass growth and schizophyllan production increase the viscosity of the cultivation medium, thus resulting in mass transfer limitation for the substrate. In this study, adding talc and aluminium oxide microparticles into the cultivation medium was studied to improve the fungal growth and morphology. The response surface methodology and one factor at a time were applied to find the effects of microparticles with different sizes and concentrations on the schizophyllan production. The optimum concentration and size of aluminium oxide microparticles were obtained as 20 g L-1 and < 30 µm, respectively. Aluminium oxide microparticles in shake flask culture caused to increase the schizophyllan production from 10 to 15 g L-1 and decrease the cultivation time from 10 to 7 days. The production yield also increased from 0.11 to 0.30 g of schizophyllan/g glucose. Bioreactor cultivation showed a twofold increase in schizophyllan production from 1.5 to 3 g L-1. The results of this study suggested a significant increase in the production of schizophyllan using a low-cost "microparticle-enhanced cultivation" without any further optimization of the culture medium.

Flow and performance effects of talc alternatives on powder cosmetic formulations.

OBJECTIVE: To explore the performance effects of fumed silica and cornstarch as alternatives to talc in cosmetic powder formulations. METHODS: FT4 Powder Rheometer from Freeman Technology was used to test the flowability and compressibility of compact powder formulation samples containing talc, fumed silica and cornstarch at varying concentrations. The colour of the samples is evaluated by physical observation. RESULTS: The results show that the concentration of these additives influences the performance of cosmetic powder formulations. Improved compressibility is assessed as an increase in the compressibility percentage, while improved flowability is assessed by reduction in the flow energy of each sample. Talc shows improved compressibility at a minimum of 10% but would require more than 20% to impart improved flow performance. Fumed Silica shows improved compressibility from as low as 5% and this performance increases as the concentration is increased up to 20%. For the flow effects, fumed silica shows a reduction in the flow energy from as little as 5% and this effect is more drastic as the concentration is increased up to 20%. Cornstarch, however, shows a reverse effect for both compressibility and flowability with increasing flow energy and decreasing compressibility with increasing cornstarch concentration. It shows improved compressibility up to a maximum of 10% and improved flow only at concentrations lower than 5%. For a mixture of cornstarch and fumed silica at a total of 5%, both compressibility and flowability are increased as the concentration of cornstarch is reduced and that of fumed silica increased. CONCLUSION: Fumed silica and cornstarch are suitable as alternatives to talc in cosmetic powder formulations. Of the two, Fumed silica showed better compressibility and flow effects. However, a mix of both powders had suitable effects on the compressibility, flow and colour of the formulation.

OBJECTIF: Explorer les effets de performance de la silice fumée et de l'amidon de maïs comme alternatives au talc dans les formulations de poudres cosmétiques. MÉTHODOLOGIES: FT4 Rhéomètre pour poudres de Freeman Technology a été utilisé pour determiner la fluidité et la compressibilité d'échantillons de formulation de poudres compactes contenant du talc, de la silice fumée et de l'amidon de maïs à des concentrations variables. La couleur des échantillons est évaluée par observation physique. RÉSULTATS: Les résultats montrent que la concentration de ces additifs influence la performance des formulations de poudres cosmétiques. L'amélioration de la compressibilité est évaluée par une augmentation du pourcentage de compressibilité alors que l'amélioration de la fluidité est évaluée par la réduction de l'énergie de flux pour chaque échantillon. Le talc présente une compressibilité améliorée à un minimum de 10 %, mais il faudrait plus de 20 % pour donner une meilleure performance de flux. La silice fumée présente une meilleure compressibilité à partir de 5% et cette performance augmente en tant que la concentration augmente jusqu'à 20%. Pour les effets de flux, la silice fumée montre une réduction de l'énergie de flux à partir de 5% et cet effet est plus radical lorsque la concentration augmente jusqu'à 20%. L'amidon de maïs, cependant, montre un effet inverse pour la compressibilité et la fluidité avec une énergie de flux augmente et une compressibilité décroissante avec la concentration d'amidon de maïs augmente. Il présente une meilleure compressibilité jusqu'à un maximum de 10 % et une meilleure fluidité seulement à des concentrations inférieures à 5 %. Pour un mélange d'amidon de maïs et de silice fumée à un total de 5%, la compressibilité et la fluidité sont augmentées en tant que la concentration d'amidon de maïs est réduite et celle de silice fumée augmentée. CONCLUSION: La silice fumée et l'amidon de maïs est suitable pour remplacer le talc dans les formulations de poudres cosmétiques. Parmi les deux, la silice fumée a montré une meilleure compressibilité et de meilleurs effets de flux. Cependant, un mélange des deux poudres a eu des effets appropriés sur la compressibilité, le flux et la couleur de la formulation.

Microparticles globally reprogram Streptomyces albus toward accelerated morphogenesis, streamlined carbon core metabolism, and enhanced production of the antituberculosis polyketide pamamycin.

Streptomyces spp. are a rich source for natural products with recognized industrial value, explaining the high interest to improve and streamline the performance of in these microbes. Here, we studied the production of pamamycins, macrodiolide homologs with a high activity against multiresistant pathogenic microbes, using recombinant Streptomyces albus J1074/R2. Talc particles (hydrous magnesium silicate, 3MgO·4SiO2 ·H2 O) of micrometer size, added to submerged cultures of the recombinant strain, tripled pamamycin production up to 50 mg/L. Furthermore, they strongly affected morphology, reduced the size of cell pellets formed by the filamentous microbe during the process up to sixfold, and shifted the pamamycin spectrum to larger derivatives. Integrated analysis of transcriptome and precursor (CoA thioester) supply of particle-enhanced and control cultures provided detailed insights into the underlying molecular changes. The microparticles affected the expression of 3,341 genes (56% of all genes), revealing a global and fundamental impact on metabolism. Morphology-associated genes, encoding major regulators such as SsgA, RelA, EshA, Factor C, as well as chaplins and rodlins, were found massively upregulated, indicating that the particles caused a substantially accelerated morphogenesis. In line, the pamamycin cluster was strongly upregulated (up to 1,024-fold). Furthermore, the microparticles perturbed genes encoding for CoA-ester metabolism, which were mainly activated. The altered expression resulted in changes in the availability of intracellular CoA-esters, the building blocks of pamamycin. Notably, the ratio between methylmalonyl CoA and malonyl-CoA was increased fourfold. Both metabolites compete for incorporation into pamamycin so that the altered availability explained the pronounced preference for larger derivatives in the microparticle-enhanced process. The novel insights into the behavior of S. albus in response to talc appears of general relevance to further explore and upgrade the concept of microparticle enhanced cultivation, widely used for filamentous microbes.

Analysis of particles from hamster lungs following pulmonary talc exposures: implications for pathogenicity.

BACKGROUND: Talc, a hydrous magnesium silicate, often used for genital hygiene purposes, is associated with ovarian carcinoma in case-control studies. Its potential to cause inflammation, injury, and functional changes in cells has been described. A complication of such studies is that talc preparations may be contaminated with other materials. A previous study by (Beck et al. Toxicol Appl Pharmacol 87:222-34, 1987) used a hamster model to study talc and granite dust exposure effects on various biochemical and cellular inflammatory markers. Our current study accessed key materials used in that 1987 study; we re-analyzed the original talc dust with contemporary scanning electron microscopy and energy dispersive x-ray analysis (SEM/EDX) for contaminants. We also examined the original bronchoalveolar lavage (BAL) cells with polarized light microscopy to quantify cell-associated birefringent particles to gain insight into the talc used. RESULTS: SEM/EDX analyses showed that asbestos fibers, quartz, and toxic metal particulates were below the limits of detection in the original talc powder. However, fibers with aspect ratios ≥3:1 accounted for 22% of instilled material, mostly as fibrous talc. Talc (based on Mg/Si atomic weight % ratio) was the most abundant chemical signature, and magnesium silicates with various other elements made up the remainder. BAL cell counts confirmed the presence of acute inflammation, which followed intratracheal instillation. Measurements of cell associated birefringent particles phagocytosis revealed significant differences among talc, granite, and control exposures with high initial uptake of talc compared to granite, but over the 14-day experiment, talc phagocytosis by lavaged cells was significantly less than that of granite. Phagocytosis of talc fibers by macrophages was observed, and birefringent particles were found in macrophages, neutrophils, and multinucleate giant cells in lavaged cells from talc-exposed animals. CONCLUSION: Our data support the contention that talc, even without asbestos and other known toxic contaminants, may elicit inflammation and contribute to lung disease. Our findings support the conclusions of (Beck et al. Toxicol Appl Pharmacol 87:222-34, 1987) study. By analyzing particulate exposures with polarized light microscopy and SEM/EDX, fibrous talc was identified and a distinctive pattern of impaired particulate ingestion was demonstrated.

Effects of methyl oleate and microparticle-enhanced cultivation on echinocandin B fermentation titer.

Echinocandin B (ECB) is a key precursor of antifungal agent Anidulafungin, which has demonstrated clinical efficacy in patients with invasive candidiasis. In this study, the effects of microparticle-enhanced cultivation and methyl oleate on echinocandin B fermentation titer were investigated. The results showed that the titer was significantly influenced by the morphological type of mycelium, and mycelium pellet was beneficial to improve the titer of this secondary metabolism. First, different carbon sources were chosen for the fermentation, and methyl oleate achieved the highest echinocandin B titer of 2133 ± 50 mg/L, which was two times higher than that of the mannitol. The study further investigated the metabolic process of the fermentation, and the results showed that L-threonine concentration inside the cell could reach 275 mg/L at 168 h with methyl oleate, about 2.5 times higher than that of the mannitol. Therefore, L-threonine may be a key precursor of echinocandin B. In the end, a new method of adding microparticles for improving the mycelial morphology was used, and the addition of talcum powder (20 g/L, diameter of 45 µm) could make the maximum titer of echinocandin B reach 3148 ± 100 mg/L.

Particle size, distribution, and behavior of talc preparations: within the United States and beyond.

PURPOSE OF REVIEW: Talc remains a common sclerosant utilized for pleurodesis. However, the use of talc has documented complications and debate has persisted regarding the safety of talc as well as the differences in talc preparations available throughout the world. We sought to describe an up-to-date review of talc preparations available and the impact these preparations may have on the safety profile of talc. RECENT FINDINGS: Within laboratory-based examinations, talc particle size available within the United States appears to be more consistent with prior reported 'safe' particle sizes. The presence of talc within protein-based solutions appears to modify the overall milieu of the solution and likely results in particle aggregation. SUMMARY: The use of talc remains well accepted for pleurodesis as evidenced by inclusion by multiple guidelines. The medical fields' current understanding of talc and its basic interactions within the pleural space remain limited. Multiple questions related to the pleural space and pleurodesis remain unanswered.

Improved mycelia and polysaccharide production of Grifola frondosa by controlling morphology with microparticle Talc.

BACKGROUND: Mushroom showed pellet, clump and/or filamentous mycelial morphologies during submerged fermentation. Addition of microparticles including Talc (magnesium silicate), aluminum oxide and titanium oxide could control mycelial morphologies to improve mycelia growth and secondary metabolites production. Here, effect of microparticle Talc (45 µm) addition on the mycelial morphology, fermentation performance, monosaccharide compositions of polysaccharides and enzymes activities associated with polysaccharide synthesis in G. frondosa was well investigated to find a clue of the relationship between polysaccharide biosynthesis and morphological changes. RESULTS: Addition of Talc decreased the diameter of the pellets and increased the percentage of S-fraction mycelia. Talc gave the maximum mycelial biomass of 19.25 g/L and exo-polysaccharide of 3.12 g/L at 6.0 g/L of Talc, and mycelial polysaccharide of 0.24 g/g at 3.0 g/L of Talc. Talc altered the monosaccharide compositions/percentages in G. frondosa mycelial polysaccharide with highest mannose percentage of 62.76 % and lowest glucose percentage of 15.22 % followed with the corresponding changes of polysaccharide-synthesis associated enzymes including lowest UDP-glucose pyrophosphorylase (UGP) activity of 91.18 mU/mg and highest UDP-glucose dehydrogenase (UGDG) and GDP-mannose pyrophosphorylase (GMPPB) activities of 81.45 mU/mg and 93.15 mU/mg. CONCLUSION: Our findings revealed that the presence of Talc significantly changed the polysaccharide production and sugar compositions/percentages in mycelial and exo-polysaccharides by affecting mycelial morphology and polysaccharide-biosynthesis related enzymes activities of G. frondosa.

Historical evolution of regulatory standards for occupational and consumer exposures to industrial talc.

Talc has been used historically in a wide range of industrial applications and consumer products. The composition and purity of talc used for industrial purposes can vary greatly depending on the source and may contain asbestos minerals. The developing science associated with the health risks of asbestos had an effect on the talc industry throughout the 20th century. This review presents a detailed analysis of the evolution of regulatory standards impacting the use of industrial talc in the U.S. from the early 20th century through the 1990s. While it was recognized by the 1930s that airborne exposures to talc dust at high concentrations could cause lung disease, it was not until later that concerns were raised about the health risks associated with potential occupational exposures to asbestos from industrial talc. Regulatory agencies adopted occupational standards for industrial talc in the early 1970s, but the terminology used to define and characterize talc and other associated minerals varied between agencies. In addition, the complex and varying mineralogy of industrial talc led to inconsistent and imprecise interpretation of studies concerning health risk and occupational health standards among individual agencies.

An Application of X-Ray Fluorescence as Process Analytical Technology (PAT) to Monitor Particle Coating Processes.

An attempt to apply X-Ray Fluorescence (XRF) analysis to evaluate small particle coating process as a Process Analytical Technologies (PAT) was made. The XRF analysis was used to monitor coating level in small particle coating process with at-line manner. The small particle coating process usually consists of multiple coating processes. This study was conducted by a simple coating particles prepared by first coating of a model compound (DL-methionine) and second coating by talc on spherical microcrystalline cellulose cores. The particles with two layered coating are enough to demonstrate the small particle coating process. From the result by the small particle coating process, it was found that the XRF signal played different roles, resulting that XRF signals by first coating (layering) and second coating (mask coating) could demonstrate the extent with different mechanisms for the coating process. Furthermore, the particle coating of the different particle size has also been investigated to evaluate size effect of these coating processes. From these results, it was concluded that the XRF could be used as a PAT in monitoring particle coating processes and become powerful tool in pharmaceutical manufacturing.

Development of metoprolol tartrate-loaded sustained-release pellets: effect of talc on the mechanism of drug release.

Talc is one of the most commonly used antiadherents in the coating film. However, the mechanism of influence of talc on drug release has yet to be fully understood. In this study, metoprolol tartrate (MT)-loaded Eudragit NE 30 D-coated sustained-release (SR) pellets were prepared using talc as an antiadherent in the layering and coating processes. Talc significantly reduced the stickiness of the layered or coated substrates, thus enhancing the process smoothness. Moreover, the incorporation of talc into the coating film significantly affected drug release. The water vapor permeability and drug permeability of free films increased as the concentration of talc increased. Importantly, talc had a dynamic effect on the drug release. The drug release rate of the pellets in the initial stage (within 2 h) increased with increasing talc concentrations, which exceeded the critical pigment volume concentration resulted in leaks formation in the coated film. However, subsequent swelling of the membrane and expansion of the copolymer network eliminated the influence of talc and the drug release was then controlled by the polymeric membrane. These results suggest that talc contributed to the reduction of the sticking of layered or coated substrates, and facilitated the manufacturing process and drug release properties.

Cosmetic talc as a risk factor for pleural mesothelioma: a weight of evidence evaluation of the epidemiology.

OBJECTIVE: Due to some historical (and inaccurate) reports that asbestos might be present in some cosmetic talc products, questions are occasionally raised regarding the potential pleural mesothelioma risks associated with cosmetic talc products. Our objective was to determine the incidence of pleural mesothelioma of individuals exposed to cosmetic talc. MATERIALS AND METHODS: We conducted a systematic review of the epidemiological literature for cosmetic talc miners and millers and found three occupational cohort studies that evaluated pleural mesothelioma incidence in workers in Italy, Norway, France, and Austria. We conducted a second literature review to evaluate the incidence and mortality of pleural mesothelioma among patients who received talc pleurodesis treatments before 1965 and found retrospective clinical studies including over 300 patients with follow-up ranging from 14 to 40 years. RESULTS: There were no mesotheliomas reported in any of the cosmetic talc miner and miller cohorts. A pooled analysis of data from the cohort mortality studies indicated that four mesothelioma deaths would have been expected from the 90,022 person-years of observation, and this was associated with 84% and 67% statistical power to observe a 3-fold or 2.5-fold increase in pleural mesothelioma mortality, respectively. None of the patients who received talc pleurodesis treatments developed mesothelioma. CONCLUSION: We conclude that there is no epidemiological evidence to support the hypothesis that exposure to cosmetic talc is associated with the development of pleural mesothelioma.

Evaluation of the presence of asbestos in cosmetic talcum products.

Talc has been used for over a century in a variety of cosmetic products. While pure cosmetic talc (free of asbestos) is not considered a risk factor for mesothelioma, it has been recently suggested that inhalation of cosmetic talc containing trace levels of asbestos is a risk factor for mesothelioma. Bulk analyses of cosmetic talcum products were performed in the 1960s and 1970s, however, the analytical methods used at that time were incapable of determining whether asbestos minerals were present in the asbestiform versus non-asbestiform habit. The distinction between these two mineral habits is critical, as non-asbestiform amphibole minerals do not present an asbestos-related cancer risk via inhalation. As such, we evaluated six historical talcum powders using modern-era analytical methods to determine if asbestos is present, and if so, to identify the mineral habit (asbestiform versus non-asbestiform) of the asbestos. Based on their labels, the products were produced by four manufacturers and sold between 1940 and 1977. The products were analyzed in duplicate by two laboratories using standard protocols. Laboratory A analyzed samples using X-ray diffraction (XRD) and polarized light microscopy (PLM), and Laboratory B analyzed samples using PLM and transmission electron microscopy (TEM) with energy dispersive X-ray analysis (EDX) and selected area electron diffraction (SAED). No asbestiform minerals were found in any of the products. Nonetheless, even if some historical cosmetic talcum products contained trace amounts (≤0.1%) of asbestiform minerals, any resulting asbestos exposure would be expected to be exceedingly low, and comparable to exposures from breathing ambient air.

Novel application method of talcum powder to prevent sticking tendency and modify release of esomeprazole magnesium enteric-coated pellets.

Actually, reflecting drug release from polymer-coated pellets remains a challenge. In this study, sticking of pellets caused by Eudragit®L30D-55 was observed during the release process, leading to change in drug release. Talcum powder (talc) was used in esomeprazole magnesium pellets to prevent sticking and modify release of pellets. Three methods including talc incorporated in enteric layer, physically mixed and coating resulted pellets were employed to prevent the sticking. The release of pellets was modified by addition talc into subcoat. The dispersion coefficient (Fd) and release profiles were determined in phosphate buffer solution (pH 6.8 and 6.0) and distilled water. It was found that the first manner made Fd increase to about 0.75, but the latter two methods could completely prevent sticking. Also, the second manner was more simple and readily scaled up. In addition, talc in subcoat significantly slowed the drug release in water, but the slowing release effect is less pronounced at pH 6.0 and 6.8. These different effects of talc were attributed to a different release mechanism in three media. The release profiles in water were fitted to Nuttanan model, and the K designated as "diffusive resistance constant" was linearly increased with talc levels in subcoat (R(2)=0.9874).

[Study on Talcum Powder Ironing Process of Corium Elephatis and Analysis Content of Amino Acid Before and After Processing].

Objective: To screen the talcum powder ironing process parameters of Corium Elephatis, and to analyze the contents of protein and amino acids in Corium Elephatis before and after processing. Methods: Take the crushing rate and alcohol-soluble extractive as evaluation indexes, investigating the boiling temperature, boiling time and stirring speed with the L9（ 34） orthogonal test method. Determine the contents of protein and amino acid in Corium Elephatis by Kjeldahl method and amino acid analyzer. Results: The optimal processing technology parameters were as follows: In 100 kg Corium Elephatis it should be added 30 kg talcum powder, the processing temperature was 350 380 ℃,with stirring speed of 15 r / min processing for 3 min. Both Corium Elephatis before and after processing had 16 kinds of amino acids. In crude Corium Elephatis, the content of protein was 92. 4%,and the total content of amino acids was 62. 79%; while in processed Corium Elephatis, the content of protein was 98. 2%,and the total content of amino acids was67. 03%,those had no significant difference commpared with the crude one when ignoring the water content. Conclusion: The selected talcum powder ironing process of corium elephatis is stable with good reproducible.

DNA extraction from plant food supplements: Influence of different pharmaceutical excipients.

The consumption of plant food supplements (PFS) has been growing globally, with an increase of misleading labeling and fraudulent practices also being reported. Recently, the use of molecular biology techniques has been proposed to detect botanical adulterations, one of the possible frauds in PFS. However, difficulties in recovering DNA from some PFS samples have been described. Aiming at using DNA-based methods for the unequivocal identification of plant species in PFS, adequate DNA isolation is required. However, PFS often contain pharmaceutical excipients known to have adsorbent properties that might interfere with DNA extraction. Thus, the aim of this work was to assess the effect of different excipients (talc, silica, iron oxide and titanium dioxide) on the recovery/amplification of DNA. For that purpose, known amounts of template maize DNA were spiked either to PFS or to model mixtures of excipients and quantified by real-time PCR. The tested excipients evidenced clear adsorption phenomena that justify the hampering effect on DNA extraction from PFS. The use of either 10% talc or 0.5% dyes completely adsorbed DNA, resulting in negative PCR amplifications. For the first time, pharmaceutical excipients were shown to affect DNA extraction explaining the inability of recovering DNA from some PFS samples in previous studies.

Safety Assessment of Talc as Used in Cosmetics.

The Cosmetic Ingredient Review Expert Panel (Panel) assessed the safety of talc for use in cosmetics. The safety of talc has been the subject of much debate through the years, partly because the relationship between talc and asbestos is commonly misunderstood. Industry specifications state that cosmetic-grade talc must contain no detectable fibrous, asbestos minerals. Therefore, the large amount of available animal and clinical data the Panel relied on in assessing the safety of talc only included those studies on talc that did not contain asbestos. The Panel concluded that talc is safe for use in cosmetics in the present practices of use and concentration (some cosmetic products are entirely composed of talc). Talc should not be applied to the skin when the epidermal barrier is missing or significantly disrupted.

Enhanced Aspergillus ficuum phytase production in fed-batch and continuous fermentations in the presence of talcum microparticles.

This study aimed to enhance Aspergillus ficuum phytase production in fed-batch and continuous fermentations with addition of talcum microparticles. Phytase activity almost doubled in fed-batch and continuous fermentations by addition of 15 g/l of talcum compared to the control. Effect of talcum on fungal morphology was also shown that addition of talcum provided smaller fungal pellets and more homogenized fermentation broth compared to the control. Average fungal pellet radius decreased from 500 to 100 µm by addition of 15 g/l of talcum in the bioreactors. Also, 15 g/l talcum addition increased phytase productivity and optimum dilution rate in the continuous fermentations from 0.293 to 0.621 U/ml/h and from 0.09 to 0.1/h, respectively, compared to control.