Dual drug-loaded polymeric mixed micelles for ovarian cancer: Approach to enhanced therapeutic efficacy of albendazole and paclitaxel.

Chemotherapy resistance remains a significant challenge in treating ovarian cancer effectively. This study addresses this issue by utilizing a dual drug-loaded nanomicelle system comprising albendazole (ABZ) and paclitaxel (PTX), encapsulated in a novel carrier matrix of D-tocopheryl polyethylene glycol 1000 succinate vitamin E (TPGS), soluplus and folic acid. Our objective was to develop and optimize this nanoparticulate delivery system using solvent evaporation techniques to enhance the therapeutic efficacy against ovarian cancer. The formulation process involved pre-formulation, formulation, optimization, and comprehensive characterization of the micelles. Optimization was conducted through a 32 factorial design, focusing on the effects of polymer ratios on particle size, zeta potential, polydispersity index (PDI) and entrapment efficiency (%EE). The optimal formulation demonstrated improved dilution stability, as indicated by a critical micelle concentration (CMC) of 0.0015 mg/mL for the TPGS-folic acid conjugate (TPGS-FOL). Extensive characterization included differential scanning calorimetry (DSC), nuclear magnetic resonance (NMR), and Fourier-transform infrared spectroscopy (FTIR). The release profile exhibited an initial burst followed by sustained release over 90 h. The cytotoxic potential of the formulated micelles was superior to that of the drugs alone, as assessed by MTT assays on SKOV3 ovarian cell lines. Additionally, in vivo studies confirmed the presence of both drugs in plasma and tumour tissues, suggesting effective targeting and penetration. In conclusion, the developed TPGS-Fol-based nanomicelles for co-delivering ABZ and PTX show promising results in overcoming drug resistance, enhancing solubility, sustaining drug release, and improving therapeutic outcomes in ovarian cancer treatment.

Dual Drug Delivery for Augmenting Bacterial Wound Complications via Tailored Ultradeformable Carriers.

Addressing the complex challenge of healing of bacterially infected wounds, this study explores the potential of lipid nanomaterials, particularly advanced ultradeformable particles (UDPs), to actively influence the wound microenvironment. The research introduces a novel therapeutic approach utilizing silver sulfadiazine (SSD) coupled with vitamin E (VE) delivered through UDPs (ethosomes/transferosomes/transethosomes). Comparative physicochemical characterization of these nanosized drug carriers reveals the superior stability of transethosomes, boasting a zeta potential of -36.5 mV. This method demonstrates reduced side effects compared to conventional therapies, with almost 90% SSD and 72% VE release achieved in wound pH in a sustained manner. Cytotoxicity assessment shows 60% cell viability even at the highest concentration (175 µg/mL), while hemolysis test demonstrates RBC lysis below 5% at a concentration of 250 µg/mL. Vitamin E-SSD-loaded transethosomes (VSTEs) significantly enhance cellular migration and proliferation, achieving 95% closure within 24 h, underscoring their promising efficacy. The synergistic method effectively reduces bacterial burden, evidenced by an 80% reduction in Escherichia coli and Staphylococcus aureus within the wound microenvironment. This approach offers a promising strategy to address complications associated with skin injuries.

Conditions Leading to Ketene Formation in Vaping Devices and Implications for Public Health.

The outbreak of e-cigarette or vaping use-associated lung injury (EVALI) in the United States in 2019 led to a total of 2807 hospitalizations with 68 deaths. While the exact causes of this vaping-related lung illness are still being debated, laboratory analyses of products from victims of EVALI have shown that vitamin E acetate (VEA), an additive in some tetrahydrocannabinol (THC)-containing products, is strongly linked to the EVALI outbreak. Because of its similar appearance and viscosity to pure THC oil, VEA was used as a diluent agent in cannabis oils in illicit markets. A potential mechanism for EVALI may involve VEA's thermal decomposition product, ketene, a highly poisonous gas, being generated under vaping conditions. In this study, a novel approach was developed to evaluate ketene production from VEA vaping under measurable temperature conditions in real-world devices. Ketene in generated aerosols was captured by two different chemical agents and analyzed by gas chromatography-mass spectrometry (GC-MS) and liquid chromatography with tandem mass spectrometry (LC-MS/MS). The LC-MS/MS method takes advantage of the high sensitivity and specificity of tandem mass spectrometry and appears to be more suitable than GC-MS for the analysis of large batches of samples. Our results confirmed the formation of ketene when VEA was vaped. The production of ketene increased with repeat puffs and showed a correlation to temperatures (200 to 500 °C) measured within vaping devices. Device battery power strength, which affects the heating temperature, plays an important role in ketene formation. In addition to ketene, the organic oxidant duroquinone was also obtained as another thermal degradation product of VEA. Ketene was not detected when vitamin E was vaped under the same conditions, confirming the importance of the acetate group for its generation.

Dual-responsive renal injury cells targeting nanoparticles for vitamin E delivery to treat ischemia reperfusion-induced acute kidney injury.

Ischemia/reperfusion (I/R) is an important inducer of acute kidney injury (AKI), and triggers the generation of reactive oxygen species (ROS) and the expression of matrix metalloproteinase 2 (MMP2), exacerbating kidney damage. Given the immense potential of vitamin E (VitE) as a natural fat-soluble antioxidant in kidney protection, we designed the nanoparticles (NPs) that could dual respond to ROS and MMP2, aiming to accurately deliver VitE to renal injury cells. The NPs utilized Gel-SH as a sensitive receptor for MMP2 and diselenide as a sensitive receptor for ROS, while PEG2k modification enhanced biocompatibility and prevented phagocytosis mediated by the mononuclear phagocyte system. The amphiphilic Gel-SH and diselenide encapsulate the liposoluble VitE and self-assemble into the NPs with a hydrodynamic size of 69.92 nm. Both in vivo and in vitro experiments based on these NPs show good biocompatibility and the ability of target renal injury cells. In vivo kidney I/R injury models and in vitro cell hypoxia/reoxygenation models, the NPs have demonstrated effects in reducing oxidative stress and alleviating AKI. Notably, VitE can preferentially react with peroxyl radical (LOO•) than polyunsaturated fatty acid (PUFA), inhibiting the formation of carbon centered radical (L•), thereby blocking the chain reaction between PUFA and LOO• in ferroptosis. The NPs also inhibit the transition from AKI to chronic kidney disease, with few side effects. Thus, the NPs with dual-responsiveness to MMP2 and ROS for targeted delivery of VitE to renal injury cells exhibit remarkable effects in inhibiting ROS and the chain reactions of ferroptosis, making it a promising therapeutic agent against AKI caused by I/R.

The pulmonary protective potential of vanillic acid-loaded TPGS-liposomes: modulation of miR-217/MAPK/NF-κb signalling pathway.

The aim is to investigate the possible pulmonary protective effect of vanillic acid (VA) in liposome-TPGS nanoparticles, to overcome VA's poor bioavailability. VA was successfully extracted. Liposomes were prepared using thin film hydration. Central composite design was adopted for optimisation of liposomes to get the maximum entrapment efficiency (EE%) and the minimum mean diameter, where the liposomes were further modified with TPGS, and tested for PDI, zeta-potential, and in-vitro drug release. In-vivo study on mice with LPS-acute pulmonary toxicity was tested. TPGS-modified VA-liposomes showed EE% of 69.35 ± 1.23%, PS of 201.7 ± 3.23 nm, PDI of 0.19 ± 0.02, and zeta-potential of -32.2 ± 0.32 mv. A sustained drug release of the TPGS-modified VA-liposomes was observed compared to standard VA, and a pulmonary-protective effect through decreasing miR-217 expression with subsequent anti-inflammatory effect through suppression of MAPK and PI3K/NF-κB pathways was also demonstrated in the current study. TPGS-modified VA-liposomes showed an enhanced bioavailability and a sustained drug release with promising pulmonary protective effects against acute pulmonary injury diseases.

Chondroitin Sulfate-Based Nanocapsules as Nanocarriers for Drugs and Nutraceutical Supplements.

Oil-core nanocapsules (NCs, also known as nanoemulsions) are of great interest due to their application as efficient carriers of various lipophilic bioactives, such as drugs. Here, we reported for the first time the preparation and characterization of NCs consisting of chondroitin sulfate (CS)-based shells and liquid oil cores. For this purpose, two amphiphilic CS derivatives (AmCSs) were obtained by grafting the polysaccharide chain with octadecyl or oleyl groups. AmCS-based NCs were prepared by an ultrasound-assisted emulsification of an oil phase consisting of a mixture of triglyceride oil and vitamin E in a dispersion of AmCSs. Dynamic light scattering and cryo-transmission electron microscopy showed that the as-prepared core-shell NCs have typical diameters in the range of 30-250 nm and spherical morphology. Since CS is a strong polyanion, these particles have a very low surface potential, which promotes their stabilization. The cytotoxicity of the CS derivatives and CS-based NCs and their impact on cell proliferation were analyzed using human keratinocytes (HaCaTs) and primary human skin fibroblasts (HSFs). In vitro studies showed that AmCSs dispersed in an aqueous medium, exhibiting mild cytotoxicity against HaCaTs, while for HSFs, the harmful effect was observed only for the CS derivative with octadecyl side groups. However, the nanocapsules coated with AmCSs, especially those filled with vitamin E, show high biocompatibility with human skin cells. Due to their stability under physiological conditions, the high encapsulation efficiency of their hydrophobic compounds, and biocompatibility, AmCS-based NCs are promising carriers for the topical delivery of lipophilic bioactive compounds.

Development and Characterization of Curcumin-Loaded TPGS/F127/P123 Polymeric Micelles as a Potential Therapy for Colorectal Cancer.

Colorectal cancer (CRC) is the third most prominent cancer worldwide, and the second leading cause of cancer death. Poor outcomes and limitations of current treatments fuel the search for new therapeutic options. Curcumin (CUR) is often presented as a safer alternative for cancer treatment with a staggering number of molecular targets involved in tumor initiation, promotion, and progression. Despite being promising, its therapeutic potential is hindered due to its hydrophobic nature. Hence, the ongoing development of optimal delivery strategies based on nanotechnology, such as polymeric micelles (PMs), to overcome issues in CUR solubilization and delivery to tumor cells. In this sense, this study aimed to optimize the development and stability of CUR-loaded P123:F127:TPGS PMs (PFT:CUR) based on the thin-film approach and evaluate their therapeutic potential in CRC. Overall, the results revealed that the solubility of CUR was improved when room temperature was used to hydrate the film. The PFT-CUR hydrated at room temperature presents an average hydrodynamic diameter of 15.9 ± 0.3 nm with a polydispersity index (PDI) of 0.251 ± 0.103 and a zeta potential of -1.5 ± 1.9 mV, and a 35.083 ± 1.144 encapsulation efficiency (EE%) and 3.217 ± 0.091 drug loading (DL%) were observed. To ensure the stability of the optimized PFT-CUR nanosystems, different lyophilization protocols were tested, the use of 1% of glycine (GLY) being the most promising protocol. Regarding the critical micellar concentration (CMC), it was shown that the cryoprotectant and the lyophilization process could impact it, with an increase from 0.064 mg/mL to 0.119 mg/mL. In vitro results showed greater cytotoxic effects when CUR was encapsulated compared to its free form, yet further analysis revealed the heightened cytotoxicity could be attributed to the system itself. Despite challenges, the developed CUR-loaded PM shows potential as an effective therapeutic agent for CRC. Nonetheless, the system must undergo refinements to enhance drug entrapment as well as improve overall stability.

Effect of the Drying Method and Storage Conditions on the Quality and Content of Selected Bioactive Compounds of Green Legume Vegetables.

This study aimed to determine the effect of the drying method (freeze-drying, air-drying), storage period (12 months), and storage conditions (2-4 °C, 18-22 °C) applied to two legume species: green beans and green peas. The raw and dried materials were determined for selected physical parameters typical of dried vegetables, contents of bioactive components (vitamin C and E, total chlorophyll, total carotenoids, ß-carotene, and total polyphenols), antioxidative activity against the DPPH radical, and sensory attributes (overall quality and profiles of color, texture, and palatability). Green beans had a significantly higher content of bioactive components compared to peas. Freeze-drying and cold storage conditions facilitated better retention of these compounds, i.e., by 9-39% and 3-11%, respectively. After 12 months of storage, higher retention of bioactive components, except for total chlorophyll, was determined in peas regardless of the drying method, i.e., by 38-75% in the freeze-dried product and 30-77% in the air-dried product, compared to the raw material.

In vitro dissolution of encapsulated or dispersed Vitamin e and cholesterol is correlated with preservation of refrigerated ovine sperm.

BACKGROUND: Vitamin E ( -tocopherol) and cholesterol are crucial components in cellular protection and physiological processes. Their uses in biological media face challenges due to their poor solubility and stability. OBJECTIVE: The study investigated the complex interactions of these bioactive compounds in various encapsulation systems of cyclodextrin and liposome, as well as dispersion in PEG-6000, in an attempt to improve the viability, motility, and preservation of ovine sperm cells. MATERIALS AND METHODS: The work explored the in vitro dissolution kinetics of vitamin E (d-tocopherol) and cholesterol using semi-empirical models. RESULTS: The release profiles of VitE and Chl varied considerably, depending on the specific carrier systems. For liposome-loaded VitE and Chl, the Korsmeyer-Peppas model gave the best fit; for CD/VitE and CD/Chl, the Higuchi model provided the best fit, whereas for PEG-6000 dispersions (VitE and Chl) both the Higuchi and Korsmeyer-Peppas models demonstrated the excellent fit. All systems indicated a Fickian diffusion mechanism dictated by the concentration gradient. The delivery of VitE and Chl with CD, liposome and PEG dispersion significantly increased sperm mobility and motility. The effect on the VCL parameter was the greatest by liposome-loaded VitE and Chl, followed by CD encapsulation and PEG-6000 dispersion. CONCLUSION: The dynamics of vitamin E and cholesterol within innovative delivery systems offers valuable insights into the development of advanced solutions in reproductive health, particularly on improving the viability, motility of refrigerated ovine sperm cells. Doi.org/10.54680/fr24510110712.

Over 100 years of vitamin E: An overview from synthesis and formulation to application in animal nutrition.

The groundbreaking discovery of vitamin E by Evans and Bishop in 1922 was an important milestone in vitamin research, inspiring further investigation into its crucial role in both human and animal nutrition. Supplementing vitamin E has been proved to enhance multiple key physiological systems such as the reproductive, circulatory, nervous and muscular systems. As the main antioxidant in the blood and on a cellular level, vitamin E maintains the integrity of both cellular and vascular membranes and thus modulates the immune system. This overview showcases important and innovative routes for synthesizing vitamin E on a commercial scale, provides cutting-edge insights into formulation concepts for successful product form development and emphasizes the importance and future of vitamin E in healthy and sustainable animal nutrition.

Quercetin nanocrystals for bioavailability enhancement: impact of different functional stabilizers on in vitro/in vivo drug performances.

The purpose of this study was to investigate the impact of different functional stabilizers on in vitro/in vivo drug performances after oral administration of drug nanocrystals. Quercetin nanocrystals (QT-NCs) respectively stabilized by five types of functional stabilizers, including hydroxypropyl methyl cellulose E15 (HPMC E15), poloxamer 407 (P407), poloxamer 188 (P188), D-α-tocopherol polyethylene glycol succinate (TPGS), and glycyrrhizin acid (GL), were fabricated by wet media milling technique. The particle size, morphology, physical state, drug solubility, drug dissolution in vitro, and orally pharmacokinetic behaviors of all QT-NCs were investigated. All QT-NCs with similar particle size about 200 nm were obtained by controlling milling speed and milling time. No significant differences in particles shape and crystalline nature were found for QT-NCs stabilized by different functional stabilizers. But the solubility and dissolution of QT-NCs were significantly influenced by the different functional stabilizers. The AUC0∼t of all QT-NCs after oral administration was in the following order: QT-NCs/P188 ≈ QT-NCs/HPMC E15 > QT-NCs/GL > QT-NCs/P407 ≈ QT-NCs/TPGS, and the Cmax showed an order of QT-NCs/P407 > QT-NCs/P188 ≈ QT-NCs/GL > QT-NCs/HPMC E15 > QT-NCs/TPGS. Both of QT-NCs/P407 and QT-NCs/TPGS exhibited faster oral absorption with Tmax at 0.5 h and 0.83 h, respectively, while the other three QT-NCs (QT-NCs/P188, QT-NCs/GL and QT-NCs/HPMC E15) showed a relatively slow absorption with same Tmax at 5.33 h. The longest MRT0∼t (11.72 h) and t1/2z (32.22 h) were observed for QT-NCs/HPMC E15. These results suggested that the different functional stabilizers could significantly influence on drug solubility, drug dissolution in vitro and orally pharmacokinetic behavior of QT-NCs, and it is possible to alter the drug dissolution in vitro, oral absorption and drug retention in vivo by changing the type of functional stabilizers in NCs preparation.

Formulation and Evaluation of Meloxicam Hybrid nano Particles.

The goal of the present study was to prepare meloxicam (MX) entrapped hybrid particles (HPs) to enhance intestinal permeation and anti-inflammatory activity. MX-HPs were prepared by nanoprecipitation method using lipid, chitosan, poloxamer, and TPGS. The formulations (MX-HPs1, MX-HPs2, MX-HPs3) were evaluated for particle size, entrapment efficiency, and drug release to select the optimized composition and further evaluated for permeation study, stability study, morphology, interaction study, and anti-inflammatory activity by carrageenan-induced rat paw edema test. The prepared MX-HPs showed nano sized particles (198.5 ± 3.7 to 223.8 ± 2.1 nm) and PDI (<0.3), zeta potential (16.5 ± 2.7 to 29.1 ± 3.6 mV), and high entrapment efficiency (75.1 ± 4.7 to 88.5 ± 3.9%). The surface morphology was assessed by transmission electron microscopy and showed non-aggregated particles. Infra-red (IR) spectroscopy of pure MX as well as formulation revealed no drug-polymer interaction and X-ray diffraction confirmed the conversion of crystalline MX into amorphous form. The release study data revealed prolonged MX release for 24 h. The selected optimized hybrid particles (MX-HPs2) revealed a 2.3-fold improved enhancement ratio than free MX. The storage stability and gastrointestinal stability data demonstrated a stable formulation in SIF as well as SGF. The anti-inflammatory activity showed better therapeutic action than pure MX dispersion. From the study, it can be concluded that the prepared MX-HPs may be a promising delivery system for MX in treating inflammatory disorders.

External Factors Modulating Vaping-Induced Thermal Degradation of Vitamin E Acetate.

Despite previous studies indicating the thermal stability of vitamin E acetate (VEA) at low temperatures, VEA has been shown to readily decompose into various degradation products such as alkenes, long-chain alcohols, and carbonyls such as duroquinone (DQ) at vaping temperatures of <200 °C. While most models simulate the thermal decomposition of e-liquids under pyrolysis conditions, numerous factors, including vaping behavior, device construction, and the surrounding environment, may impact the thermal degradation process. In this study, we investigated the role of the presence of molecular oxygen (O2) and transition metals in promoting thermal oxidation of e-liquids, resulting in greater degradation than predicted by pure pyrolysis. Thermal degradation of VEA was performed in inert (N2) and oxidizing atmospheres (clean air) in the absence and presence of Ni-Cr and Cu-Ni alloy nanopowders, metals commonly found in the heating coil and body of e-cigarettes. VEA degradation was analyzed using thermogravimetric analysis (TGA) and gas chromatography/mass spectrometry (GC/MS). While the presence of O2 was found to significantly enhance the degradation of VEA at both high (356 °C) and low (176 °C) temperatures, the addition of Cu-Ni to oxidizing atmospheres was found to greatly enhance VEA degradation, resulting in the formation of numerous degradation products previously identified in VEA vaping emissions. O2 and Cu-Ni nanopowder together were also found to significantly increase the production of OH radicals, which has implications for e-liquid degradation pathways as well as the potential risk of oxidative damage to biological systems in real-world vaping scenarios. Ultimately, the results presented in this study highlight the importance of oxidation pathways in VEA thermal degradation and may aid in the prediction of thermal degradation products from e-liquids.

Site-selective and stereoselective functionalization of non-activated tertiary C-H bonds.

The synthesis of complex organic compounds usually relies on controlling the reactions of the functional groups. In recent years, it has become possible to carry out reactions directly on the C-H bonds, previously considered to be unreactive. One of the major challenges is to control the site-selectivity because most organic compounds have many similar C-H bonds. The most well developed procedures so far rely on the use of substrate control, in which the substrate has one inherently more reactive C-H bond or contains a directing group or the reaction is conducted intramolecularly so that a specific C-H bond is favoured. A more versatile but more challenging approach is to use catalysts to control which site in the substrate is functionalized. p450 enzymes exhibit C-H oxidation site-selectivity, in which the enzyme scaffold causes a specific C-H bond to be functionalized by placing it close to the iron-oxo haem complex. Several studies have aimed to emulate this enzymatic site-selectivity with designed transition-metal catalysts but it is difficult to achieve exceptionally high levels of site-selectivity. Recently, we reported a dirhodium catalyst for the site-selective functionalization of the most accessible non-activated (that is, not next to a functional group) secondary C-H bonds by means of rhodium-carbene-induced C-H insertion. Here we describe another dirhodium catalyst that has a very different reactivity profile. Instead of the secondary C-H bond, the new catalyst is capable of precise site-selectivity at the most accessible tertiary C-H bonds. Using this catalyst, we modify several natural products, including steroids and a vitamin E derivative, indicating the applicability of this method of synthesis to the late-stage functionalization of complex molecules. These studies show it is possible to achieve site-selectivity at different positions within a substrate simply by selecting the appropriate catalyst. We hope that this work will inspire the design of even more sophisticated catalysts, such that catalyst-controlled C-H functionalization becomes a broadly applied strategy for the synthesis of complex molecules.

Potential for release of pulmonary toxic ketene from vaping pyrolysis of vitamin E acetate.

A combined analytical, theoretical, and experimental study has shown that the vaping of vitamin E acetate has the potential to produce exceptionally toxic ketene gas, which may be a contributing factor to the upsurge in pulmonary injuries associated with using e-cigarette/vaping products. Additionally, the pyrolysis of vitamin E acetate also produces carcinogen alkenes and benzene for which the negative long-term medical effects are well recognized. As temperatures reached in vaping devices can be equivalent to a laboratory pyrolysis apparatus, the potential for unexpected chemistries to take place on individual components within a vape mixture is high. Educational programs to inform of the danger are now required, as public perception has grown that vaping is not harmful.

Activity and Characterization of Tocopherol Oxidase in Corn Germs and Its Relationship with Oil Color Reversion.

Color reversion has long been a major problem for the vegetable oil industry, and the enzymatic oxidation of γ-tocopherol is thought to trigger this phenomenon. In this study, first, the extraction, purification, and detailed characterization of tocopherol oxidase from fresh corn germs were performed. Then, the relationship between the enzyme reaction of γ-tocopherol and oil color reversion was verified. The results showed that the membrane-free extracts of raw corn germ performed specific catalysis of tocopherol in the presence of lecithin. In terms of the oxidation product, tocored (the precursor of color reversion) was detected in the mixture after the catalytic reactions, indicating that this anticipated enzyme reaction was probably correlated with the color reversion. Furthermore, the optimal pH and temperature for the tocopherol oxidase enzyme were 4.6 and 20 °C, respectively. In addition, ascorbic acid at 1.0 mM completely inhibited the enzymatic reaction.

Cellular and Non-cellular Antioxidant Properties of Vitamin E-Loaded Metallic-Quercetin/Polycaprolactone Nanoparticles for the Treatment of Melanogenesis.

Inhibition of melanogenesis by quercetin and vitamin E is extensively reported in the literature, independently, with limitations in antioxidant potential owing to less permeation, solubility, decreased bioavailability, and reduced stability. Thus, the aim of the present study was to synthesize a novel complex of metal ions (copper and zinc) with quercetin to enhance antioxidant properties which were confirmed by docking studies. Polycaprolactone-based nanoparticles of the synthesized complex (PCL-NPs, Q-PCL-NPs, Zn-Q-PCL-NPs, Cu-Q-PCL-NPs) were made later loaded with vitamin E which made the study more interesting in enhancing antioxidant profile. Nanoparticles were characterized for zeta size, charge, and polydispersity index, while physiochemical analysis of nanoparticles was strengthened by FTIR. Cu-Q-PCL-NPs-E showed maximum in vitro release of vitamin E, i.e., 80 ± 0.54%. Non-cellular antioxidant effect by 2,2-diphenyl-1-picrylhydrazyl was observed at 93 ± 0.23% in Cu-Q-PCL-NPs-E which was twofold as compared to Zn-Q-PCL-NPs-E. Michigan Cancer Foundation-7 (MCF-7) cancer cell lines were used to investigate the anticancer and cellular antioxidant profile of loaded and unloaded nanoparticles. Results revealed reactive oxygen species activity of 90 ± 0.32% with the addition of 89 ± 0.64% of its anticancer behavior shown by Cu-Q-PCL-NPs-E after 6 and 24h. Similarly, 80 ± 0.53% inhibition of melanocyte cells and 95 ± 0.54% increase of keratinocyte cells were also shown by Cu-Q-PCL-NPs-E that confirmed the tyrosinase enzyme inhibitory effect. Conclusively, the use of zinc and copper complex in unloaded and vitamin E-loaded nanoparticles can provide enhanced antioxidant properties with inhibition of melanin, which can be used for treating diseases of melanogenesis.

In vitro profiling of fenofibrate solid dispersion mediated tablet formulation to treat high blood cholesterol.

OBJECTIVE: Fenofibrate (FNF), an anti-hyperlipidemic agent, suffers from poor water solubility (0.000707mg/ml) and belongs to class II drug as per BCS, shows a slow dissolution rate. The current investigation aimed to fabricate a fast-dissolving tablet of FNF (not available in the commercial market) using solid dispersion technique employing Vitamin E-D-α-Tocopheryl polyethylene glycol 1000 succinate (vitamin E TPGS) as molecular biomaterial to enhance dissolution rate and reduce the time required to reach the systemic circulation. MATERIALS AND METHODS: Firstly, carrier material was selected based on the release study via preparing solid dispersion using the melting method, and prepared solid dispersion was characterized. Secondly, fast-dissolving tablets from solid dispersion were fabricated using the direct compression tool and characterized for X-ray diffraction (XRD) pattern, friability, hardness, content uniformity, weight variation and in vitro disintegration test. RESULTS: The X-ray diffraction study confirmed the successful formation of solid dispersion using vitamin E TPGS by analyzing the change in physical state. The fabricated solid dispersion exhibited higher drug content than a physical mixture of FNF. An excipient interference study was also performed in methanol and 0.75% w/v sodium lauryl sulphate. It revealed no significant alterations in the absorption peak of FNF as analyzed using UV spectroscopy at 287nm. In addition, water absorption ratio phase solubility and wetting time were also assessed. In -vitro release of FNF from developed tablets was found significantly higher (93.23%±3.11; p<0.001) as compared to prepared compressed tablet of pure FNF (12.21±2.34%). The dissolution rate was also determined, and data were then kept to various kinetic models such as zero-order chemical kinetic, first-order chemical kinetic, Hixon-Crowell and Higuchi chemical kinetic. CONCLUSION: A complete and sequential in vitro and physicochemical characterization of developed formulation was carried out to set-up improved and effective treatment for high blood cholesterol.

Exploring the potential neurotoxicity of vaping vitamin E or vitamin E acetate.

Serious adverse health effects have been reported with the use of vaping products, including neurologic disorders and e-cigarette or vaping product use-associated lung injury (EVALI). Vitamin E acetate, likely added as a diluent to cannabis-containing products, was linked to EVALI. Literature searches were performed on vitamin E and vitamin E acetate-associated neurotoxicity. Blood brain barrier (BBB) penetration potential of vitamin E and vitamin E acetate were evaluated using cheminformatic techniques. Review of the literature showed that the neurotoxic potential of inhalation exposures to these compounds in humans is unknown. Physico-chemical properties demonstrate these compounds are lipophilic, and molecular weights indicate vitamin E and vitamin E acetate have the potential for BBB permeability. Computational models also predict both compounds may cross the BBB via passive diffusion. Based on literature search, no experimental nonclinical studies and clinical information on the neurotoxic potential of vitamin E via inhalation. Neurotoxic effects from pyrolysis by-product, phenyl acetate, structurally analogous to vitamin E acetate, suggests vitamin E acetate has potential for central nervous system (CNS) impairment. Cheminformatic model predictions provide a theoretical basis for potential CNS permeability of these inhaled dietary ingredients suggesting prioritization to evaluate for potential hazard to the CNS.

Vaping Aerosols from Vitamin E Acetate and Tetrahydrocannabinol Oil: Chemistry and Composition.

The popularity of vaping cannabis products has increased sharply in recent years. In 2019, a sudden onset of electronic cigarette/vaping-associated lung injury (EVALI) was reported, leading to thousands of cases of lung illness and dozens of deaths due to the vaping of tetrahydrocannabinol (THC)-containing e-liquids that were obtained on the black market. A potential cause of EVALI has been hypothesized due to the illicit use of vitamin E acetate (VEA) in cannabis vape cartridges. However, the chemistry that modifies VEA and THC oil, to potentially produce toxic byproducts, is not well understood under different scenarios of use. In this work, we quantified carbonyls, organic acids, cannabinoids, and terpenes in the vaping aerosol of pure VEA, purified THC oil, and an equal volume mixture of VEA and THC oil at various coil temperatures (100-300 °C). It was found under the conditions of our study that degradation of VEA and cannabinoids, including Δ9-THC and cannabigerol (CBG), occurred via radical oxidation and direct thermal decomposition pathways. Evidence of terpene degradation was also observed. The bond cleavage of aliphatic side chains in both VEA and cannabinoids formed a variety of smaller carbonyls. Oxidation at the ring positions of cannabinoids formed various functionalized products. We show that THC oil has a stronger tendency to aerosolize and degrade compared to VEA at a given temperature. The addition of VEA to the e-liquid nonlinearly suppressed the formation of vape aerosol compared to THC oil. At the same time, toxic carbonyls including formaldehyde, 4-methylpentanal, glyoxal, or diacetyl and its isomers were highly enhanced in VEA e-liquid when normalized to particle mass.