The regulation and its application of the charge decay rate in triboelectric nanogenerator.

ABSTRACT

The decay rate of charge in the friction layer is one of the key factors affecting the output performance of triboelectric nanogenerators (TENG). Reducing the decay rate of the triboelectric charge can increase the charge-carrying capacity of the friction layer and improve the output current and voltage of the TENG. This makes a friction generator more suitable for discontinuous driving environments. In contrast, increasing the decay rate of the charge in the friction layer can greatly improve the recovery time of the device, although it reduces the output performance of the generator. This is conducive to the application of friction generator in the field of sensors. In this study, polystyrene (PS) and carbon nanotubes (CNTs) were added to polyvinylidene fluoride (PVDF) nanofibers to adjust the charge decay time in the friction layer, thereby regulating the output performance of the friction generator and sensor. When the amount of added PS in the PVDF nanofiber reached 20%, the charge density on the friction surface increased by 1.9 times, and the charge decay time decreased by 64 times; when 0.1 wt% CNTs were added in the PVDF nanofiber, the charge decay time increased by more than 10 times. The former is more conducive to improving the power generation performance of the TENG, and the latter significantly improves the stability and repeatability of TENG-based sensors.