الملخص
OBJECTIVE@#To analyze the important effect of 3D printing personalized lumbar support on lumbar pain and lumbar function in patients with lumbar disc herniation.@*METHODS@#From October 2018 to May 2021, 60 patients initially diagnosed with lumbar disc herniation were selected and divided into an observation group and a control group, with 30 patients in each group. Among them, there were 18 males and 12 females in the observation group;the age ranged from 24 to 56 years old, with an average of (45.23±6.07) years old. The course of disease ranged from 1 to 24 months, with an average of(6.25±0.82) months, and rehabilitation treatment was carried out by wearing 3D printed personalized lumbar support. There were 19 males and 11 females in the control group;the age ranged from 25 to 57 years old, with an average of (42.78±7.58) years old. The course of disease ranged from 1 to 24 months, with an average of (6.72±1.36) months, and rehabilitation treatment is carried out by wearing traditional lumbar protective equipment. The Japanese Orthopaedic Association (JOA) scores, lumbar Oswestry dysfunction index (ODI) and visual analogue scale (VAS) were evaluated and compared between the two groups before and 1 course after treatment (3 weeks).@*RESULTS@#There was no statistically significant difference in JOA, ODI, and VAS between two groups before treatment (P>0.05). After one course of treatment (3 weeks), JOA scores of both groups was increased compared to before treatment (P<0.05), while ODI and VAS decreased compared to before treatment (P<0.05). After treatment, JOA score of observation group was higher than that of control group (P<0.05), while ODI and VAS scores were lower than those of control group. No adverse events occurred in both groups.@*CONCLUSION@#The application of 3D printing personalized lumbar support can effectively alleviate the pain of patients with lumbar disc herniation and improve their lumbar function of patients.