الملخص
The bglS gene encoding endo-l,3-1,4-beta-glucanase from Bacillus subtilis was cloned and sequenced in this study. The bglS expression cassette, including PGK1 promoter, bglS gene fused to the signal sequence of the yeast mating pheromone alpha-factor (MFalpha1(S)), and ADH1 terminator with G418-resistance as the selected marker, was constructed. Then one of the PEP4 allele of Saccharomyces cerevisiae WZ65 strain was replaced by bglS expression cassette using chromosomal integration of polymerase chain reaction (PCR)-mediated homologous recombination, and the bglS gene was expressed simultaneously. The recombinant strain S. cerevisiae (SC-betaG) was preliminarily screened by the clearing hydrolysis zone formed after the barley beta-glucan was hydrolyzed in the plate and no proteinase A (PrA) activity was measured in fermenting liquor. The results of PCR analysis of genome DNA showed that one of the PEP4 allele had been replaced and bglS gene had been inserted into the locus of PEP4 gene in recombinant strains. Different endo-l,3-1,4-beta-glucanase assay methods showed that the recombinant strain SC-betaG had high endo-l,3-1,4-beta-glucanase expression level with the maximum of 69.3 U/(h.ml) after 60 h of incubation. Meanwhile, the Congo Red method was suitable for the determination of endo-l,3-1,4-beta-glucanase activity during the actual brewing process. The current research implies that the constructed yeast strain could be utilized to improve the industrial brewing property of beer.
الموضوعات
Amino Acid Sequence , Aspartic Acid Endopeptidases , Genetics , Base Sequence , Glycoside Hydrolases , Genetics , Molecular Sequence Data , Mutagenesis, Insertional , Polymerase Chain Reaction , Recombination, Genetic , Saccharomyces cerevisiae , Genetics , Saccharomyces cerevisiae Proteins , Geneticsالملخص
Optimization of a process for extracting astaxanthin from Phaffia rhodozyma by acidic method was investigated, regarding several extraction factors such as acids, organic solvents, temperature and time. Fractional factorial design, central composite design and response surface methodology were used to derive a statistically optimal model, which corresponded to the following optimal condition: concentration of lactic acid at 5.55 mol/L, ratio of ethanol to yeast dry weight at 20.25 ml/g, temperature for cell-disruption at 30 degrees C, and extraction time for 3 min. Under this condition, astaxanthin and the total carotenoids could be extracted in amounts of 1294.7 microg/g and 1516.0 microg/g, respectively. This acidic method has advantages such as high extraction efficiency, low chemical toxicity and no special requirement of instruments. Therefore, it might be a more feasible and practical method for industrial practice.
الموضوعات
Basidiomycota , Chemistry , Hydrochloric Acid , Lactic Acid , Xanthophyllsالملخص
Sequential methodology based on the application of three types of experimental designs was used to optimize the fermentation conditions for elastase production from mutant strain ZJUEL31410 of Bacillus licheniformis in shaking flask cultures. The optimal cultivation conditions stimulating the maximal elastase production consist of 220 r/min shaking speed, 25 h fermentation time, 5% (v/v) inoculums volume, 25 ml medium volume in 250 ml Erlenmeyer flask and 18 h seed age. Under the optimized conditions, the predicted maximal elastase activity was 495 U/ml. The application of response surface methodology resulted in a significant enhancement in elastase production. The effects of other factors such as elastin and the growth factor (corn steep flour) on elastase production and cell growth were also investigated in the current study. The elastin had no significant effect on enzyme-improved production. It is still not clear whether the elastin plays a role as a nitrogen source or not. Corn steep flour was verified to be the best and required factor for elastase production and cell growth by Bacillus licheniformis ZJUEL31410.
الموضوعات
Bacillus , Fermentation , Pancreatic Elastase , Research Designالملخص
The work is intended to achieve optimum culture conditions of alpha-galactosidase production by a mutant strain Aspergillus foetidus ZU-G1 in solid-state fermentation (SSF). Certain fermentation parameters involving moisture content, incubation temperature, cultivation period of seed, inoculum volume, initial pH value, layers of pledget, load size of medium and period of cultivation were investigated separately. The optimal cultivating conditions of alpha-galactosidase production in SSF were 60% initial moisture of medium, 28 degrees C incubation temperature, 18 h cultivation period of seed, 10% inoculum volume, 5.0 approximately 6.0 initial pH of medium, 6 layers of pledget and 10 g dry matter loadage. Under the optimized cultivation conditions, the maximum alpha-galactosidase production was 2 037.51 U/g dry matter near the 144th hour of fermentation.
الموضوعات
Aspergillus , Classification , Cell Culture Techniques , Methods , Enzyme Activation , Enzyme Stability , Fermentation , Hydrogen-Ion Concentration , Species Specificity , Temperature , alpha-Galactosidase , Chemistryالملخص
Fermentation of Phaffia rhodozyma is a major method for producing astaxanthin, an important pigment with industrial and pharmaceutical application. To improve astaxanthin productivity, single factor and mixture design experiments were used to investigate the effects of nitrogen source on Phaffia rhodozyma cultivation and astaxanthin production. Results of single factor experiments showed nitrogen source could significantly affect P. rhodozyma cultivation with respect to carbon source utilization, yeast growth and astaxanthin accumulation. Further studies of mixture design experiments using (NH(4))(2)SO(4), KNO(3) and beef extract as nitrogen sources indicated that the proportion of three nitrogen sources was very important to astaxanthin production. Validation experiments showed that the optimal nitrogen source was composed of 0.28 g/L (NH(4))(2)SO(4), 0.49 g/L KNO(3) and 1.19 g/L beef extract. The kinetic characteristics of batch cultivation were investigated in a 5-L pH-stat fermentor. The maximum amount of biomass and highest astaxanthin yield in terms of volume and in terms of biomass were 7.71 mg/L and 1.00 mg/g, respectively.
الموضوعات
Bioreactors , Microbiology , Cell Culture Techniques , Methods , Cell Proliferation , Computer Simulation , Mitosporic Fungi , Physiology , Models, Biological , Nitrogen , Metabolism , Xanthophyllsالملخص
Octenyl succinic anhydride (OSA) modified early Indica rice starch was prepared in aqueous slurry systems using response surface methodology. The paste properties of the OSA starch were also investigated. Results indicated that the suitable parameters for the preparation of OSA starch from early Indica rice starch were as follows: reaction period 4 h, reaction temperature 33.4 degrees C, pH of reaction system 8.4, concentration of starch slurry 36.8% (in proportion to water, w/w), amount of OSA 3% (in proportion to starch, w/w). The degree of substitution was 0.0188 and the reaction efficiency was 81.0%. The results of paste properties showed that with increased OSA modification, the starch derivatives had higher paste clarity, decreased retrogradation and better freeze-thaw stability.
الموضوعات
Biochemistry , Methods , Chemical Phenomena , Chemistry, Physical , Freezing , Hydrogen-Ion Concentration , Light , Models, Statistical , Oryza , Metabolism , Starch , Chemistry , Succinic Anhydrides , Chemistry , Temperatureالملخص
The solubilization of elastin by Bacillus licheniformis elastase cannot be analyzed by conventional kinetic methods because the biologically relevant substrate is insoluble and the concentration of enzyme-substrate complex has no physical meaning. In this paper we report the optimization of elastolysis conditions and analysis of elastolytic kinetics. Our results indicated that the hydrolyzing temperature and time are very important factors affecting elastolysis rate. The optimized conditions using central composite design were as follows: elastolysis temperature 50 degrees C, elastase concentration 1 x 10(4) U/ml, elastin 80 mg, elastolytic time 4 h. Investigation of the effects of substrate content, elastase concentration and pH was also revealed that low or high elastin content inhibits the elastolysis process. Increasing elastase improves elastin degradation, but high elastase may change the kinetics characterization. Alkaline environment can decrease elastin degradation rate and pH may affect elastolysis by changing elastase reaction pH. To further elucidate the elastolysis process, the logistic model was used to elastolysis kinetics study showing clearly that the logistic model can reasonably explain the elastolysis process, especially under lower elastase concentration. However, there is still need for more investigations with the aid of other methods, such as biochemical and molecular methods.
الموضوعات
Bacillus , Colorimetry , Elastin , Metabolism , Hydrogen-Ion Concentration , Kinetics , Pancreatic Elastase , Metabolism , Regression Analysis , Temperatureالملخص
The production of butyric acid by Clostridium butyricum ZJUCB at various pH values was investigated. In order to study the effect of pH on cell growth, butyric acid biosynthesis and reducing sugar consumption, different cultivation pH values ranging from 6.0 to 7.5 were evaluated in 5-L bioreactor. In controlled pH batch fermentation, the optimum pH for cell growth and butyric acid production was 6.5 with a cell yield of 3.65 g/L and butyric acid yield of 12.25 g/L. Based on these results, this study then compared batch and fed-batch fermentation of butyric acid production at pH 6.5. Maximum value (16.74 g/L) of butyric acid concentration was obtained in fed-batch fermentation compared to 12.25 g/L in batch fermentation. It was concluded that cultivation under fed-batch fermentation mode could enhance butyric acid production significantly (P<0.01) by C. butyricum ZJUCB.
الموضوعات
Bioreactors , Microbiology , Butyric Acid , Metabolism , Cell Culture Techniques , Methods , Cell Proliferation , Clostridium butyricum , Metabolism , Glucose , Metabolism , Hydrogen-Ion Concentrationالملخص
Waste hops are good sources of flavonoids. Extraction of flavonoids from waste hops (SC-CO(2) extracted hops) using supercritical fluids technology was investigated. Various temperatures, pressures and concentrations of ethanol (modifier) and the ratio (w/w) of solvent to material were tested in this study. The results of single factor and orthogonal experiments showed that at 50 degrees C, 25 MPa, the ratio of solvent to material (50%), ethanol concentration (80%) resulted in maximum extraction yield flavonoids (7.8 mg/g). HPLC-MS analysis of the extracts indicated that flavonoids obtained were xanthohumol, the principal prenylflavonoid in hops.
الموضوعات
Chromatography, High Pressure Liquid , Chromatography, Supercritical Fluid , Methods , Ethanol , Chemistry , Flavonoids , Humulus , Chemistry , Mass Spectrometryالملخص
The partition behaviors of beta-1,3-1,4-glucanase, alpha-amylase and neutral proteases from clarified and whole fermentation broths of Bacillus subtilis ZJF-1A5 were investigated. An aqueous two-phase system (polyethylene glycol (PEG)/MgSO(4)) was examined with regard to the effects of PEG molecular weight (MW) and concentration, MgSO(4) concentration, pH and NaCl concentration on enzyme partition and extraction. The MW and concentration of PEG were found to have significant effects on enzyme partition and extraction with low MW PEG showing the greatest benefit in the partition and extraction of beta-glucanase with the PEG/MgSO(4) system. MgSO(4) concentration influenced the partition and extraction of beta-glucanase significantly. pH had little effect on beta-glucanase or proteases partition but affected alpha-amylase partition when pH was over 7.0. The addition of NaCl had little effect on the partition behavior of beta-glucanase but had very significant effects on the partitioning of alpha-amylase and on the neutral proteases. The partition behaviors of beta-glucanase, alpha-amylase and proteases in whole broth were also investigated and results were similar to those obtained with clarified fermentation broth. A two-step process for purifying beta-glucanase was developed, which achieved beta-glucanase recovery of 65.3% and specific activity of 14027 U/mg, 6.6 times improvement over the whole broth.
الموضوعات
Bacillus subtilis , Chemical Fractionation , Methods , Endo-1,3(4)-beta-Glucanase , Chemistry , Extracellular Fluid , Chemistry , Phase Transition , Water , Chemistryالملخص
A derivative ratio spectrophotometric method was used for the simultaneous determination of beta-carotene and astaxanthin produced from Phaffia rhodozyma. Absorbencies of a series of the standard carotenoids in the range of 441 nm to 490 nm demonstrated that their absorptive spectra accorded with Beer's law and that the additivity when the concentrations of beta-carotene and astaxanthin and their mixture were within the range of 0 to 5 microg/ml, 0 to 6 microg/ml, and 0 to 6 microg/ml, respectively. When the wavelength interval (lambda) at 2 nm was selected to calculate the first derivative ratio spectra values, the first derivative amplitudes at 461 nm and 466 nm were suitable for quantitatively determining beta-carotene and astaxanthin, respectively. Effect of divisor on derivative ratio spectra could be neglected; any concentration used as divisor in range of 1.0 to 4.0 microg/ml is ideal for calculating the derivative ratio spectra values of the two carotenoids. Calibration graphs were established for beta-carotene within 0-6.0 microg/ml and for astaxanthin within 0-5.0 microg/ml with their corresponding regressive equations in: y=-0.0082x-0.0002 and y=0.0146x-0.0006, respectively. R-square values in excess of 0.999 indicated the good linearity of the calibration graphs. Sample recovery rates were found satisfactory (>99%) with relative standard deviations (RSD) of less than 5%. This method was successfully applied to simultaneous determination of beta-carotene and astaxanthin in the laboratory-prepared mixtures and the extract from the Phaffia rhodozyma culture.
الموضوعات
Algorithms , Basidiomycota , Metabolism , Spectrophotometry, Ultraviolet , Methods , Xanthophylls , beta Carotene , Chemistryالملخص
Angiotensin I-converting enzyme (ACE) inhibitory peptides have been shown to have antihypertensive effects and have been utilized for physiologically functional foods and pharmaceuticals. The ACE inhibitory ability of a hydrolysate is determined by its peptide composition. However, the peptide composition of a hydrolysate depends on proteolytic enzyme and the hydrolysis conditions. In this study, the effect of process conditions on the ACE inhibitory activity of rice dregs hydrolyzed with a trypsin was investigated systematically using response surface methodology. It was shown that the ACE inhibitory activity of rice dregs hydrolysates could be controlled by regulation of five process conditions. Hydrolysis conditions for optimal ACE inhibition were defined using the response surface model of fractional factorial design (FFD), steepest ascent design, and central composite design (CCD).