الملخص
The fcl gene encodes GDP-fucose synthase, which catalyzes two-step differential isomerase and reductase reactions in the synthesis of GDP-L-fucose from GDP-D-mannose. It also participates in the biosynthesis of amino sugar and ribose sugar, and is one of the key enzymes to regulate the metabolism of sugar and nucleotides in organisms. The presence of fcl gene in Saccharopolyspora pogona was found through sequencing result of genome. The mutant S. pogona-fcl and S. pogona-Δfcl were constructed by gene engineering technology. The results showed that the gene had an effects on growth and development, protein expression and transcriptional level, insecticidal activity, and biosynthesis of butenyl-spinosyn of Saccharopolyspora pogona. The results of HPLC analysis showed that the yield of butenyl-spinosyn in S. pogona-Δfcl was 130% compared with that in S. pogona, which reduced by 25% in S. pogona-fcl. The results of determination of insecticidal activity showed that S. pogona-Δfcl had a stronger insecticidal activity against Helicoverpa armigera than that of S. pogona, while the S. pogona-fcl had a lower insecticidal activity against Helicoverpa armigera compared with S. pogona. Scanning electron microscopy (SEM) was used to observe the morphology of the mycelia. It was found that the surface of the S. pogona-Δfcl was wrinkled, and the mycelium showed a short rod shape. There was no significant difference in mycelial morphology between S. pogona-fcl and S. pogona. Aboved all showed that deletion of fcl gene in S. pogona hindered the growth and development of mycelia, but was beneficial to increase the biosynthesis of butenyl-spinosyn and improve insecticidal activity. Whereas the fcl gene over-expression was not conducive to the biosynthesis of butenyl-spinosyn and reduced their insecticidal activity. SDS-PAGE results showed that the difference of protein expression among the three strains was most obvious at 96 hours, which was identified by real-time fluorescence quantitative polymerase chain reaction, the results showed that there were significant differences of related genes in transcriptional levels among the three strains. Based on the results of the study, a network metabolic control map was constructed to analyze the effect of fcl gene on growth and the regulation pathway of butenyl-spinosyn biosynthesis, which provided an experimental basis for revealing the regulation mechanism of butenyl-spinosyn biosynthesis and related follow-up studies.
الموضوعات
Bacterial Proteins , Genetic Engineering , Insecticides , Macrolides , Saccharopolysporaالملخص
Objective To investigate the clinical effect on incomplete spinal injury by ganglioside intravenous injection combined with intrathecal injection.Methods From January 2011 to January 2015, seventy-nine cases with irreducible articular process interlocking of cervical spine fracture with dislocation of cervical spinal cord injury,underwent one stage anterior and posterior surgical treatment,postoperative routine use of antibiotics to prevent infection,and the hormone,dehydration to promote bone cell growth and neurotrophic drugs treatment.The patients were randomly divided into the intravenous injection group(42 cases),given intravenous injection of monalsialic acid four hexose ganglioside sodium(GM-1)40 mg/d,mecobalamin tablets 0.5 mg/time,3 times/d,30 d oral;the combined intrathecal injection group(37 cases)was given GM-1 40 mg/d,intravenous injection at 15 d after intrathecal injection,1 time a week 40 mg,with a total of 4 weeks.The degree of spinal cord injury was evaluated according to Frankel classification; cervical function was evaluated according to JOA score; bone graft fusion,stability of cervical spine and degree of spinal cord injury were evaluated by imaging.Results The operation time in the intravenous injection group and the combined intrathecal injection group were(4.15 ± 0.65)h and(4.10 ± 0.85)h,and the intraoperative blood loss was(850.50±35.10)ml and(858.60±25.20)ml,respectively,and there were no significant differences between the two groups(t=1.375,1.452,P>0.05).The total dose of GM-1 in the combined intrathecal injection group was(785.20 ± 3.28)mg,significantly higher than that in the intravenous injection group((610.55 ± 5.28) mg),the difference was statistically significant(t=12.542,P<0.05);79 patients were followed up for 12-24 months,with an average of(15.2 ± 1.3)months.The improvement rate of nerve function of the combined intrathecal injection group was(64.35±4.33)%,significantly higher than that in the intravenous injection group (55.50±5.44)%,the difference was statistically significant(t=8.813,P<0.05);the postoperative JOA scores of the intravenous injection group((13.55 ± 1.75)points)and combined intrathecal injection group((12.85 ±1.97)points)were significantly higher than those before the surgery((7.25± 0.83)points,(7.19± 0.93) points),the differences were statistically significant(P<0.05).There was no significant difference in the JOA scores between the two groups before and after the operation(P>0.05).At the last follow-up,X-ray showed bone fusion at the bone graft site,and the internal fixation was good and firm.MR showed that the degeneration signal area of the cervical spinal cord decreased in varying degrees,and edema and inflammatory reaction disappeared.Conclusion Postoperative treatment of ganglioside intravenous injection combined with intrathecal injection is safe and feasible in the treatment of incomplete cervical spinal cord injury caused by cervical fracture dislocation with irreducible articular process interlocking.
الملخص
Objective To investigate the clinical efficacy of Cerus and cucumis polypeptide injection in the prevention of heterotopic ossification for the drug treatment of traumatic knee joint fracture after operation.Methods To retrospect the analysis about 150 cases with fracture reduction and internal fixation of traumatic around the knee joint fracture from January 2010 to January 2014 in Daliang Hospital of Shunde District of Foshan,including 89 cases of reduction and internal fixation were performed in group A,and with safflower injection infusion therapy,61 cases with allergic constitution were not given by Cerus and cucumis polypeptide injection in group B.According to the activity degree and HSS scoring system,the function of knee joint was evaluated before and after operation.According to the condition of arounding knee joint bone fracture healing and heterotopic ossification in X-ray and CT examination and to compare the correlation of probability between heterotopic ossification and Cerus and cucumis polypeptide injection in traumatic around knee joint fracture.Results All were followed up with 12.0-24.0 months,with average(13.6±2.2)months.Activity of knee joint between group A and B were respectively(47.2±7.3)°,(46.4±6.8)°before treatment,and HSS score of group A and B were respectively(50.8±10.0)points,(51.5±9.6)points,so there were no statistically significant difference(P>0.05).Activity of knee joint between group A and B were respectively(115.1±6.5)°,(112.1±7.8)°at the time of the last follow-up,and HSS score of group A and B were respectively(86.2±5.0)points,(85.5±7.0)points,so there were no statistically significant difference(P>0.05).There were statistically significant difference in activity of knee joint and HSS scores in group A or in group B at the time of the last follow-up(t=13.322,12.898,10.052,10.435,P<0.05).The incidence of heterotopic ossification was 8.99%(8/89)in group A,the incidence of heterotopic ossification was 1.64%(1/61)in group B,there were statistically significant difference between A and B(x2=10.873,P<0.05).Conclusion During the drug treatment,there is a correlation between heterotopic ossification and Cerus and cucumis polypeptide injection used in traumatic around knee joint fracture after operation.
الملخص
BACKGROUND:Hip prosthesis needs to meet the good structural compatibility with femoral bone marrow cavity and the biomechanical properties of the original bone tissue. However, the difference of individual anatomical characteristics and the stress concentration in the local area after replacement directly affect postoperative combination of femoral prosthesis stem, force flow transfer and femoral reconstruction, and finaly result in aseptic loosening of hip joint in some patients. OBJECTIVE:To analyze the biomechanical characteristics of modified biotype self-locking hip prosthesis by the method of finite element analysis, and to provide the reference for the application of self-locking hip prosthesis in hip replacement. METHODS:Experimental design contained traditional biotype hip joint prosthesis group and self-locking hip joint prosthesis group. In accordance with the finite element models of self-locking hip prosthesis, 28 kinds of screw fixation were established. Three-dimensional models were generated in the Minics system. After the optimization of prosthesis, prosthesis was designed. In the Solidworks software, the femur was re-positioned and set for contacting set in Ansys to analyze the stress distribution and displacement distribution of the femoral-prosthesis-screw by Ansys. We compared the peak of stress and displacement of the femur and prosthesis, and analyzed the biomechanical stability of prosthesis. RESULTS AND CONCLUSION:(1) By using the Ansys finite element method, we analyzed the stress and displacement distribution of the femoral-prosthesis-screw. The minimum stress peak value of the femur was 15.698 MPa. The minimum stress peak value of prosthesis was 45.491 MPa. The minimum stress peak value of screw was 8.359 MPa. The minimum displacement peak value of femur was 1.125 3 mm. The minimum displacement peak value of prosthesis was 1.039 6 mm. The minimum displacement peak value of screw was 0.566 4 mm. (2) Compared with the traditional biotype hip joint prosthesis group, in 28 kinds of self-locking hip joint prostheses, the stress was minimum in the group E. The displacement was minimum in groups A-F. Regarding comprehensive stress and displacement, groups A-F were the best combination. The maximum stress of femoral-prosthesis-screw was 18.936, 59.494 and 12.382 MPa. The maximum displacement of femoral-prosthesis-screw was 1.125 3, 1.039 6 and 0.626 3 mm. (3) These findings indicated that the stress and displacement parameters of groups A-F was the best parameter combination in 28 kinds of self-locking hip joint prostheses, and it is the recommended index of researching and developing self-locking hip prosthesis.
الملخص
[Objective] To evaluate the effect of fast rehabilitation nursing pathway in patients after artificial hip replacement.[Methods] 86 patients underwent artificial hip replacement were randomly divided into the control group and the experimental group with 43 cases in each group.The control group received routine care,while the experimental group was given fast rehabilitation nursing pathway.Anxiety and pain at 48h after operation were evaluated,and hip joint function(Harris score)was evaluated six months after operation.[Results] Compared with the control group,anxiety and pain score at 48h after operation decreased markedly,and Harris score six months after operation increased significantly.[Conclusions] Fast rehabilitation nursing pathway can reduce both the short-term and long-term efficacy of patients after artificial hip replacement.