الملخص
Objectives:To explore the accuracy of pedicle screw placement assisted with improved 3D-print-ed drill guiding template in cervical spine.Methods:The clinical data of 60 patients undergone posterior cervical pedicle screw placement in our hospital between January 2016 and January 2023 were analyzed retro-spectively,including 30 males and 30 females with an average age of 17-84 years(58.7±13.8 years).The pa-tients were divided into guiding template group and free-hand group based on whether the guiding template was used to assist the placement of screws or not.The improved 3D-printed guiding template was used to assist cervical pedicle screw placement in the guiding template group(n=30),and the self-made angular-ruler was used in the free-hand group(n=30).There was no significant difference in age,gender ratio,and preoper-ative diagnosis between the two groups(P＞0.05).Cervical CT scan was performed at one week after surgery,and the accuracy of pedicle screw placement was evaluated according to the Kaneyama standard:Grade 0,the screw was completely in the pedicle;Grade 1,the size of screw penetrating the cortex＜50%of the screw diameter;Grade 2,the size of screw penetrating the cortex≥50%of the screw diameter but not com pletely out;Grade 3,the screw was completely on the outside of the pedicle.The accuracy of pedicle screw placement(ratio of grades 0 and 1)and complications such as vascular and nerve injury,incision infection,cerebrospinal fluid leakage,screw loosening and breakage caused by screw misplacement were recorded.Re-sults:A total of 152 pedicle screws were placed in the guiding template group,including 74 screws of grade 0,68 of grade 1,10 of grade 2 and 0 of grade 3,with an accuracy of screw placement of 93.4%.A total of 136 pedicle screws were placed in free-hand group,including 53 screws of grade 0,61 of grade 1,18 of grade 2 and 4 of grade 3,with an accuracy of screw placement of 83.8%.The accuracy of screw placement in the guiding template group was significantly higher than that in the free-hand group(P＜0.05).There were no related complications such as vascular and nerve injury,incision infection and cerebrospinal fluid leakage caused by misplacement of pedicle screws.The patients were followed up for 5-29 months(14.2±7.7months),and there were no complications such as screw loosening or breakage.Conclusions:Improved 3D-printed drill guiding template can improve the accuracy of pedicle screw placement in cervical spine.
الملخص
Objectives:To explore the safety and early effectiveness of decompression under full-endoscope and percutaneous pedicle screw fixation in the treatment of single-level thoracolumbar burst fractures.Methods:The clinical data of 9 patients with single-segment thoracolumbar burst fracture treated with spinal canal decompression under full-endoscope and percutaneous pedicle screw fixation from April 2021 to June 2022 in our hospital were analyzed retrospectively,including 7 males and 2 females.The age ranged from 23 to 61(39.3±9.1)years old.According to AO classification,there were 6 cases of type A,2 cases of type B and 1 case of type C.Fracture segments were T12 in 2 cases,L1 in 3 cases,L2 in 3 cases,and L3 in 1 case.According to the classification of American Spinal Injury Association(ASIA)grading,there were 2 cases of type C,2 cases of type D,and 5 cases of type E.The decompression and percutaneous pedicle screw fixation were operated through the same incision in the injured vertebrae for screw placing.The operation-related indexes and complications were recorded.The patients'low back pain was evaluated by visual analogue scale(VAS)score before operation,on 3rd day after operation and at the last follow-up.The sagittal Cobb angle,height ratio of vertebral anterior edge,and the rate of spinal canal occupation were measured on spinal X-ray and CT images,and the recovery of neurological function was evaluated at the last follow-up.Results:All 9 patients successfully completed the operation,and the operative time was 105-145min(1 12.4± 21.2min),bleeding volume was 50-110mL(83.9±19.6mL),and hospitalization time was 7-13d(9.1±1.3d).No serious complications such as wound infection,cerebrospinal fluid leakage,aggravated nerve injury occurred.The follow-up time was 6-13months(8.4±3.9 months),all the fractures healed successfully,and the healing time was 3-6 months(4.7±1.6 months).The VAS score of low back pain on the 3rd day after operation and at final follow-up significantly improved compared with that before operation(P＜0.05),and it was also significantly improved at the last follow-up compared with that on the 3rd day after operation(P＜0.05).The Cobb angle,anterior height ratio of injured vertebrae,and invasion rate of spinal canal were significantly improved compared with those before operation(P＜0.05),respectively,but there was no statistical difference between the last follow-up and postoperative 3d(P＞0.05).One patient recovered from grade C to grade D of ASIA classification,while another three patients with neurological injury recovered completely.Conclusions:Decompression under full-endoscope and percutaneous pedicle screw fixation through the same incision in the injured vertebrae for screw placement in the treatment of single-level thoracolumbar burst fractures can obtain effective nerve root and spinal canal decompression,with good correction and small operative trauma,which is a safe and effective option.
الملخص
Objectives:To compare the effects of 3D-printed personalized guiding template and robot-assisted pedicle screw placements in orthopedic surgery for adult degenerative scoliosis(ADS).Methods:Retrospective analysis was conducted on 18 ADS patients hospitalized and treated with corrective surgery in the department between January 2020 and December 2022.There were 3 males and 15 females,aged 46-73(63.2±8.2)years old.A total of 236 pedicle screws were placed,and the patients were divided into two groups according to the auxiliary screw placement methods:the 3D-printed personalized guiding template group(3D-printed group,1 1 cases,142 pedicle screws were placed)and robot-assisted screw placement group(Robot group,7 cases,94 pedicle screws were placed).The patients were followed up for 6 months and more.The vertex rotation angle and scoliosis Cobb angle were measured and compared between groups before operation.All pedicle screws were classified by Gertzbein-Robbins classification standard at 1 week after operation,and the accuracy and satisfaction of screw placement in the two groups were compared;And the operative time and incidence of complications were also analyzed and compared between the two groups.Re-sults:The 3D-printed group was not statistically different from the robot group in terms of age(63.6±9.0 years vs.62.6±7.3 years),gender ratio(male/female:2/9 vs.1/6),number of screws placed(12.91±3.83 vs.13.43± 3.60),Cobb angle(40.36°±1 1.82° vs.38.14°±12.84°),and vertex rotation angle(30.27°±7.25° vs.29.86°±9.65°),respectively(P＞0.05).The robot group was longer in operative time than that of 3D-printed group(354.29± 53.73min vs.282.27±73.87min,P＜0.05).Of the total 142 pedicle screws placed in the 3D-printed group,128 screws were of class A,10 were of class B,and 4 were of class C;Of the total 94 pedicle screws placed in the robot group,86 screws were of class A,5 were of class B,and 3 were of class C;No class D or E screws in the two groups.The accuracy rate of screw placement(90.14％)and satisfaction rate(97.18％)of the 3D-printed group were not statistically different from the accuracy rate(91.49％)and satisfaction rate(96.81％)of the robot group,respectively(P＞0.05).The incidence of complications in the 3D-printed group(36.36％)was not significantly different from that in the robot group(57.14％,P＞0.05).Conclusions:Both auxiliary screw placement methods can assist spinal surgeons to accurately place screws in ADS patients,but 3D-printed personalized guiding template needs less time in screw placement.
الملخص
Objectives:To explore the safety and accuracy of subaxial cervical pedicle screw(CPS)insertion assisted with optimized 3D-printed drill guiding template(DGT).Methods:A retrospective study was conducted to analyze the clinical data of 42 patients aged 32-74 years(50.1±9.8 years)who underwent posterior cervi-cal pedicle screw intemal fixation between August 2016 and October 2022.The patients were followed up for 13-25 months(19.6±3.2 months).They were divided into two groups of guiding template group(n=22)and free-hand group(n=20)according to the method of pedicle screw insertion.In the guiding template group,the sub-axial CPSs insertions were assisted with 3D-printed DGT,designed individually for each patient based on the design scheme of an optimized pedicle drill guiding template,and the patients consisted of 12 males and 10 females,among which 6 patients were with cervical spine injury or spinal cord injury,9 were with ossifica-tion of posterior longitudinal ligament(OPLL),5 were with intraspinal tumor,and 2 were with cervical spondy-lotic myelopathy.In the free-hand group,the subaxial CPSs were inserted with free hand according to the cervical parameters such as pedicle angle and diameter on the CT images measured before operation,and the patients consisted of 10 males and 10 females,among which 4 patients were with cervical spine injury or spinal cord injury,10 with OPLL,5 with intraspinal tumor,and 1 with cervical spondylotic myelopathy.There were no significant differences in sex,age,disease,and preoperative visual analogue scale(VAS)score and Japanese Orthopaedic Association(JO A)score between the two groups(P＞0.05).The operative time,intraopera-tive blood loss,and postoperative 12 months of VAS and JOA scores were recorded and compared.CT scan was performed at 1 week after operation on cervical spine,and the accuracy of pedicle screw placement was evaluated in accordance with Kaneyama's evaluation method:Grade 0,screw was contained in the pedicle;Grade 1,screw penetrated pedicle＜50％of the screw diameter;Grade 2,screw penetrated pedicle＞50％of the screw diameter;Grade 3,screw completely penetrated the pedicle.Grades 0 and 1 were considered accurate placement,and grades 2 and 3 were considered misplacement.The perioperative complications were recorded for each patient in the two groups.Results:The operative time,intra-operative blood loss in guiding template group(102.2±16.1min,89.3±17.7mL)were statistically less than those in free-hand group(142.8±20.9min,133.3±34.0mL)(P＜0.01).A total of 216 CPSs were placed:118 in the guiding template group,including 90 screws of grade 0,22 screws of grade 1,5 screws of grade 2,1 screw of grade 3,with an accuracy rate of 94.9％(112/118);And 98 in the free-hand group,including 48 screws of grade 0,36 screws of grade 1,10 screws of grade 2,and 4 screws of grade 3,with an accuracy rate of 85.7％(84/98).The accuracy rate of pedicle screw insertion was significant higher in the guiding template group than that in the free-hand group(P＜0.05).No major neurovascular complications nor internal fixation loosening or breakages were observed in two groups of patients.At 12 months after operation,the VAS score in both groups was statistically less than that before operation(P＜0.01),and the JOA score in both groups was statistically more than that before opera-tion(P＜0.01),and there were no significant differences in VAS score and JOA score between groups,respec-tively(P＞0.05).Conclusions:The optimized design scheme of 3D-printed DGT is helpful in improving the ac-curacy and safety of subaxial CPS insertion.
الملخص
Objective:To analyze and compare the clinical efficacy of robot-assisted and conventional navigation-assisted percutaneous minimally invasive pedicle screw placement in the treatment of thoracolumbar fractures and to provide reference for clinical treatment decisions.Methods:A literature search was performed in China National Knowledge Infrastructure(CNKI),VIP,Wanfang and English databases PubMed and Web of science by using the keywords"vertebral pedicle screws,"and"robot"in Chinese and"robot"and"pedicle screws"in English.The search time in both Chinese and English was from the establishment of the database to December 2022.The relevant clinical studies on robot-assisted and traditional navigation-assisted percutaneous minimally invasive pedicle screw placement for the treatment of thoracolumbar cone fractures were collected.Cochrane Scale and Newcastle-Ottawa Scale(NOS)were used to evaluate the quality of literatures and meta-analysis was carried out.The clinical effects of robot-assisted and traditional navigation-assisted surgery was compared.Results:A total of 15 articles were included in the study.Compared with traditional navigation-assisted percutaneous minimally invasive pedicle screw placement,robotic-assisted surgery resulted in shorter operative time[WMD=-11.45,95% CI(-18.94～-3.95),P＜0.05],less intraoperative bleeding[WMD=-19.11,95% CI(-27.51～-10.70),P<0.001],higher screw placement accuracy[number of grade A nails:RR=1.20,95% CI(1.16～1.25),P<0.001;number of grade A+B nails:RR=1.09,95% CI(1.07～1.11),P<0.001],and fewer complications[RR=0.35,95% CI(0.13～0.93),P＜0.05].The difference in hospitalization time was not statistically significant(P>0.05).Conclusion:In percutaneous minimally invasive pedicle screw placement for the treatment of thoracolumbar fractures,robot-assisted surgery has advantages over navigation-assisted surgery in terms of operative time,intraoperative bleeding,placement accuracy and complications.
الملخص
The pedicle screw internal fixation system plays a crucial role in spinal surgery, with the advantage of enhancing spinal stability. However, potential complications such as internal fixation loosening and screw pullout still exist clinically. Currently, pullout of strength is commonly used to evaluate the short-term biomechanical properties of internal fixation, fatigue test is performed to evaluate the long-term biomechanical properties of internal fixation, and torque is used to evaluate the interaction between screws and spinal bone. Factors that influence the biomechanical properties of pedicle screws include spine-related factors (bone density) and screw-related factors (screw size, screw design, and screw augmentation materials). In bones with high bone density, pullout of strength is significantly increased, and fixation strength can also be improved by increasing screw diameter and length, improving screw design, and using screw augmentation materials. Biomechanical research on pedicle screw internal fixation provides key information for achieving individualized and functional optimal channel selection. Designing screw channels with optimal fixation strength is expected to reduce the risk of screw loosening and the occurrence of surgical complications, and improve surgical effects.
الملخص
Objective:To investigate the effect of folding and filling the orbicularis muscle flap of the inferiorcentral pedicle in correction of sunken upper eyelids.Methods:From August 2020 to April 2022, 39 female patients aged 36-63 (47.1±6.3) years with dermatochalasis and sunken upper eyelid were admitted to the Plastic Surgery Department of the First Affiliated Hospital of Air Force Medical University. During the surgery, the orbicularis oculi muscle in the skin resection area was preserved and a muscle flap was formed with the central part of the lower margin of the incision as the pedicle, which was folded deep and filled in the anterior orbital septal space. 6 months after surgery, the Park method was used to compare the effects before and after surgery, and the doctors and patients were scored on the Global Aesthetic Improvement Scale, respectively.Results:Unilateral upper eyelid hematoma appeared in 1 patient and healed after local acupuncture and aspiration, unilateral incision induration appeared in 2 patients, and gradually disappeared after 6 months of follow-up. The wounds of other patients healed in one stage. All the 39 patients were followed up for 6-12 months. The scores of the Global Aesthetic Improvement Scale at 6 months after surgery were (4.12±0.95) for doctors and (3.82±1.27) for patients. Park method showed that the degree of sunken upper eyelid after surgery was significantly better than that before surgery, and the difference was statistically significant ( Z=-7.721, P=0.000). Conclusions:The folding and filling of the orbicularis muscle flap of the eye with the inferior central pedicle can correct the laxity of the upper eyelid and improve the sunken upper eyelid. This operation can make full use of local tissue, and the effect is simple and lasting.
الملخص
OBJECTIVE:Cement-augmentation pedicle screws have been widely used in spinal internal fixation surgery combined with osteoporosis in recent years,which can significantly improve the fixation strength,but compared with conventional methods,whether it has more advantages is still inconclusive of evidence-based medicine.To systematically evaluate the efficacy and safety of cement-augmented pedicle screw in the treatment of thoracolumbar degenerative diseases with osteoporosis. METHODS:Clinical controlled trials concerning the cement-augmented pedicle screw and the traditional pedicle screw placement for thoracolumbar degenerative diseases with osteoporosis were retrieved from the electronic databases such as CNKI,CBM,WanFang,VIP,PubMed,Cochrane Library,Web of Science and Embase.According to the unified criteria,we performed literature screening and quality evaluation.The meta-analysis was performed using RevMan 5.4 software. RESULTS:(1)Totally 20 articles were selected eventually,involving 2 randomized controlled studies and 18 retrospective cohort studies,totally 1 566 patients.Among them,789 cases were in the cement-augmented screw group and 777 cases in the conventional screw group.(2)Meta-analysis results showed that Japanese Orthopaedic Association score,intervertebral space height and fusion rate were higher in the cement-augmented screw group than those in the conventional screw group(MD=1.60,95%CI:1.14,2.07,P<0.000 01;MD=1.26,95%CI:0.62,1.90,P=0.000 1;OR=11.24,95%CI:2.86,44.14,P=0.000 5).Operation time was longer in the cement-augmented screw group than that in the conventional screw group(SMD=0.82,95%CI:0.42,1.23,P<0.000 1).Postoperative visual analog scale score,Oswestry dysfunction index score and incidence of screw loosening were lower in the cement-augmented screw group than those in the conventional screw group(MD=-0.50,95%CI:-0.78,-0.21,P=0.000 7;SMD=-0.49,95%CI:-0.88,-0.10,P=0.01;OR=0.08,95%CI:0.05,0.12,P<0.000 01).Hospitalization time,intraoperative blood loss,and postoperative drainage volume were not significantly different between the two groups(P>0.05). CONCLUSION:Compared with conventional pedicle screw placement,cement-augmented pedicle screw is more effective in the treatment of osteoporotic thoracolumbar degenerative disease by improving fusion rate and interbody height,reducing the incidence of screw loosening,and elevating long-term efficacy.
الملخص
BACKGROUND:The lower cervical vertebral pedicle is the main stress site of the posterior column of the spine,which is of great significance for the maintenance of the stability of the human center of gravity and the reduction of shock.At present,there are few reports on the characteristics of the internal bone trabeculae,and the characteristics of the joint site of the vertebral pedicle with the articular process and the vertebral body.It is urgent to understand the fine anatomical structure of the vertebral pedicle and the relationship and function of each part. OBJECTIVE:To observe the microanatomical morphology of the vertebral pedicle by Micro-CT scanning of cervical vertebra specimens,and to measure and analyze the microstructure and morphometric parameters of the bone trabecula in the cervical pedicle under normal conditions to evaluate the safety performance of the cervical spine. METHODS:Micro-CT scanning was performed on 31 sets of cervical vertebrae C3-C7.By checking and reconstructing the areas of interest in the bone trabecular within the vertebral pedicle,the morphological characteristics and distribution direction of the bone trabecular within the cervical pedicle were observed,and the bone microstructure parameters were detected,and the differences in the bone microstructure of the C3-C7 vertebral pedicle were analyzed and compared. RESULTS AND CONCLUSION:(1)The Micro-CT images showed that the honeycomb bone trabeculae of the pedicle of the lower cervical spine presented a complex network of microstructures.The trabeculae near the cortical bone were lamellar and relatively compact,extending forward toward the vertebral body and backward toward the articular process lamina.Abatoid bone trabeculae extended into the medullary cavity and transformed into a network structure,and then into rod-shaped bone trabeculae.The rod-shaped bone trabeculae were sparsely distributed in the medullary cavity.(2)Statistical results of morphological parameters of bone trabeculae showed that bone volume fraction values in C4 and C5 were higher than that in C7(P＜0.05).The bone surface/bone volume value in C7 was higher than that in C3,C4 and C6(P＜0.05).The bone surface density of bone trabeculae in C7 was higher than that in C3,C4,C5 and C6(P＜0.05).Trabecular thickness in C7 was higher than that in C3,C4 and C5(P＜0.05).Bone surface/bone volume and bone surface density of the left pedicle bone trabecular were greater than those on the right side(P＜0.05).(3)The microstructural changes of C3-C7 were summarized,in which the load capacity and stress of the C7 pedicle were poor,and the risk of injury was high in this area.
الملخص
BACKGROUND:The pedicle navigation template has many advantages,but there are still some problems.For example,poor soft tissue dissection leads to poor adhesion of the pedicle navigation template,resulting in screw path deviation;careful dissection of soft tissue to fit the pedicle navigation template leads to prolonged surgery time and increased bleeding;the design of the pedicle navigation template cannot predict the vertebral rotation and the impact of body position changes,resulting in the poor fitting. OBJECTIVE:To explore the utility of a new 5-point positioning point-contact pedicle navigation template in the case of scoliosis and complex pedicle. METHODS:A total of 20 patients with scoliosis and complicated pedicle admitted to the Department of Spinal Surgery,Guizhou Hospital,Beijing Jishuitan Hospital from February 2020 to February 2023 were selected for scoliosis orthopedics.During the operation,the 5-point positioning point-contact pedicle navigation template was used to guide the screws.According to the inclusion and exclusion criteria,34 cases were matched as the empirical nail placement group,and conventional barehanded nail placement was performed.The time of placement,the amount of bleeding,the number of fluoroscopies,the number of manual diversions,the level and accuracy of pedicle screws,the complications of placement,and the rate of correction of main curvature were compared between the two groups. RESULTS AND CONCLUSION:(1)There were no significant differences in sex,age,coronal Cobb's angle of the main curvature,bending Cobb's angle of the main curvature,pedicle variation,apex rotation,fusion segment,number of screws,level of screws,accuracy of screws,and rate of correction of main curvature between the navigation template group and the empirical nail placement group(P>0.05).(2)Compared with the empirical nail placement group,the navigation template group had more advantages in time of placement(P=0.034),amount of bleeding(P=0.036),number of fluoroscopies(P=0.000)and number of manual diversions(P=0.021).(3)There were 0 cases of screw-related complications in both groups.(4)In conclusion,the 5-point positioning point-contact 3D printing pedicle navigation template has a claw-like structure.It can firmly adapt to various deformities of the lamina articular process,avoid drift,and accurately place the screws.It has a point-like contact lamina structure to avoid extensive and complete dissection of the posterior structure,and reduce bleeding,operation time,and trauma.Pre-designed screw entry points and directions can reduce the number of fluoroscopy and operation time.Segmental design can avoid discomfort due to changes in anesthesia position.The operation is simple and the accuracy of screw placement is high.
الملخص
BACKGROUND:It has been suggested that CT multiplanar reconstruction should be performed prior to the placement of axial pedicle screws to determine the anatomy of the C2 pedicle in each patient,to design the appropriate screw locus and diameter,and to evaluate the feasibility of screw placement to reduce the incidence of surgery-related complications. OBJECTIVE:To evaluate the feasibility of axis pedicle screw placement by morphologic classification of pediculoisthmic component with CT multiplanar reconstruction. METHODS:The CT data of 200 patients(400 axial pedicle screws)with cervical spine were retrospectively studied by using Siemens Syngo.Via software.According to the direction of the axis of the pedicle,the CT multiplanar reconstruction positioning line was adjusted to reconstruct the sectional image of the narrowest part of the pediculoisthmic component.According to its morphological characteristics,the narrowest part of the pediculoisthmic component was divided into three types:type 1,"hook"type:Type 1a outer diameter width(a1)>0.4 cm,type 1b outer diameter width(a1)≤0.4 cm;type 2,"like circle/ellipse"type;type 3,"horizontal ellipse"type.The outer diameter width of the narrowest part of pediculoisthmic component(d1),medullary cavity width(d2),outer diameter height(a1),and medullary cavity height(a2)were compared among the three types,and the feasibility of pedicle screw placement of the three types was evaluated. RESULTS AND CONCLUSION:(1)A total of 400 axial pedicles included 269 cases of type 1,130 cases of type 2,and 1 case of type 3.(2)The mean external diameter height between types 1 and 2 was not significantly different(P>0.05).The mean medullary cavity height,mean outer diameter widths,and mean medullary cavity width were significantly different(P<0.001).There were 42 cases(15.6%)of type 1 and 0 cases(0.00%)of type 2 with mean external diameter width≤0.4 cm,and the difference was significant(P<0.001).There was only one case of type 3,whose external diameter height,medullary cavity height,outer diameter width and medullary cavity width were 1.20 cm,0.84 cm,0.64 cm and 0.31 cm,respectively.(3)These results confirm that axial pedicle screws can be safely inserted in patients with types 1a,2 and 3,which requires no further measurement and assessment.Pedicle screw insertion should be performed with caution in type 1b patients.Therefore,in type 1 patients,the width of the narrowest outer diameter of the pediculoisthmic component should be further measured to evaluate the feasibility of axial pedicle screw placement.
الملخص
BACKGROUND:With the rapid development of minimally invasive spinal surgery and enhanced recovery after surgery,endoscopic intervertebral fusion techniques have gradually emerged and been widely used in clinical practice in recent years. OBJECTIVE:To analyze the early clinical efficacy of uniaxial spinal endoscopic intervertebral fusion combined with posterior percutaneous pedicle screw fixation in the treatment of lumbar degenerative diseases. METHODS:135 patients with lumbar degenerative diseases treated by uniaxial spinal endoscopic intervertebral fusion combined with posterior percutaneous pedicle screw fixation in the Suining Central Hospital from October 2020 to December 2021 were enrolled in this study.There were 59 males and 76 females,aged 47-79 years.The lower limb and lumbar pain was evaluated by visual analog scale and lumbar function was assessed by Oswestry disability index before the operation,1 week,1,and 6 months after the operation,and at the end of follow-up.The overall pain recovery of patients was evaluated by the scoring criteria for low back pain surgery of Spine Group of Chinese Orthopedic Association and the lumbar physiological curvature and intervertebral fusion were evaluated on lumbar lateral X-ray preoperatively and at the end of follow-up. RESULTS AND CONCLUSION:(1)The 135 patients were followed up for(17.8±3.0)months after surgery.There was 1 case of endplate injury,1 case of cerebrospinal fluid leakage,1 case of nerve root injury,1 case of intervertebral cage subsidence and displacement,1 case of chronic infection,and 1 case of pedicle screw rupture.The complication rate was 5.2%.(2)The lumbar visual analog scale score and Oswestry disability index significantly decreased in the waist and lower limbs at various time points postoperatively compared with those preoperatively in 135 patients(P<0.05).The scoring criteria for low back pain surgery of the Spine Group of the Chinese Orthopedic Association were significantly better at the last follow-up than that preoperatively in 135 patients(P<0.05).(3)At the last follow-up,there was no significant difference in physiological curvature of lumbar vertebra as compared with that preoperatively in 135 patients(P>0.05),with a fusion rate of 95.8%.(4)It is concluded that uniaxial spinal endoscopic intervertebral fusion combined with posterior percutaneous pedicle screw fixation in the treatment of lumbar degenerative diseases has shown satisfactory early clinical results and is a highly safe minimally invasive spinal surgery mode.
الملخص
BACKGROUND:Bone grafting is one of the important steps in the treatment of thoracolumbar burst fractures.Because the fracture involves the spinal canal or is accompanied by spinal cord nerve damage,severe fracture bleeding and other factors,minimally invasive bone grafting for thoracolumbar burst fractures is restricted.At present,the minimally invasive treatment of thoracolumbar burst fractures is limited to percutaneous screw fixation under the tunnel.Minimally invasive percutaneous bone grafting of injured vertebrae is rarely reported,and percutaneous precise bone grafting under the endplate has not yet been reported. OBJECTIVE:To investigate the clinical effect of subcutaneous endplate bone graft support reduction combined with percutaneous pedicle screw short-segment fixation in the treatment of A3+B2 thoracolumbar burst fractures. METHODS:From June 2017 to December 2021,90 patients with A3+B2 type asymptomatic thoracolumbar burst fracture were randomly divided into 3 groups according to admission time.In group A,33 patients received the bone graft funnel accurately placed through the pedicle channel by percutaneous puncture under C-arm fluoroscopy,bone graft support reduction under the fracture endplate,percutaneous pedicle screw fixation.In group B,30 patients received multifissure intermuscular approach through pedicle bone graft support reduction combined with pedicle screw fixation.In group C,27 patients received percutaneous pedicle screw short-segment fixation under postural reduction.All patients were followed up for at least 18 months after surgery.The clinical data of the three groups,including preoperative,postoperative and last follow-up Cobb angle,anterior edge height ratio and visual analog scale pain score,were compared and analyzed. RESULTS AND CONCLUSION:(1)There were no significant differences in age,sex,injury segment and causative factors among the three groups(P>0.05).(2)All patients at follow-up had no neurological impairment,no obvious lumbar posterior deformity or intractable low back pain.(3)The operation time of group C was less than that of group A and group B(P<0.05).Intraoperative blood loss was less in group A and group C than in group B(P<0.05).(4)There were no significant differences in the anterior edge height ratio and Cobb angle among the three groups(P>0.05).Postoperative data in groups A and B were better than that in group C.At last follow-up,group A and group B outperformed group C(P<0.05).The height and Cobb angle of the vertebral body lost in the three groups were smaller in groups A and B than those in group C(P<0.05).(5)Visual analog scale pain score was better in groups A and C than that in group B after surgery(P<0.05).There was no significant difference in visual analog scale pain score among the three groups at last follow-up(P>0.05).(6)In group C,there was one case of loose internal fixation and displacement in 1 month after surgery,and the vertebral height was lost again with back pain,and after strict bed rest for 6 weeks,the vertebral height loss was not aggravated,the pain was relieved,and the internal fixation was removed after 1 year,and the height loss at the last follow-up was not aggravated.There were no cases of failure of internal fixation in groups A and B.(7)It is indicated that subcutaneous endplate bone graft support reduction combined with percutaneous pedicle screw short-segment fixation in the treatment of A3+B2 thoracolumbar burst fracture has the advantages of less trauma,less bleeding and light postoperative pain symptoms,and the effect of injury vertebral reduction and height maintenance is the same as the reduction through pedicle bone grafting support and short segment fixation with pedicle screws through the multifidus space approach.
الملخص
BACKGROUND:Atlantoaxial dislocation,because of its high difficulty and high risk of surgery,has been regarded as the"surgical restricted area"by the international orthopedic community.However,with the rapid development of intelligent digitization in orthopedics,robot-assisted navigation screw placement technology has been widely used in clinical practice,which significantly reduces the difficulty and risk of surgery and improves the safety of surgery.However,there are few reports on the application of this technique in the treatment of atlantoaxial dislocation. OBJECTIVE:To explore the application value of robot-assisted pedicle screw internal fixation in the treatment of atlantoaxial dislocation. METHODS:The medical records of five patients with atlantoaxial dislocation treated with C1-C2 pedicle screw fixation under robot-assisted navigation in Zhuhai Hospital of Guangdong Provincial Hospital of Chinese Medicine from October 2021 to July 2022 were retrospectively analyzed.Operation time,length of neck incision,blood loss,postoperative drainage volume,and length of hospital stay were recorded.Attention should be paid to cerebrospinal fluid leakage,vertebral artery injury,nerve injury,operative area infection and other complications.The visual analog scale score of neck pain,the spinal cord injury grade of the American Spinal Injury Association,the cervical spine score of the Japanese Orthopaedic Association,and the imaging indicators were collected before surgery and at the last follow-up.Screw placement accuracy was assessed. RESULTS AND CONCLUSION:(1)Five patients were successfully completed surgery,without vascular,nerve injury or other complications,and were followed up for 12-20 months.(2)A total of 20 cervical pedicle screws were placed in 5 patients,including 9 type A screws,10 type B screws,and 1 type C screw.The accuracy of screw placement was 95%.(3)At the last follow-up,the visual analog scale score was(0.80±0.71)points,which was significantly lower than that before operation(4.00±2.83)points;the Japanese Orthopaedic Association score was(14.80±0.84)points,which was significantly higher than that before operation(8.00±0.71)points.Anterior atlantodental interval decreased from(7.86±3.25)mm to(2.82±0.93)mm;space available of the spinal cord increased from(6.74±1.99)mm to(12.10±3.51)mm;cervicomedullary angle increased from(133.32±13.55)° to(153.44±9.53)°;clivus-canal angle increased from(128.02±9.92)° to(143.25±12.99)°.The results of the last follow-up indexes were improved compared with those before operation,and the differences were significant(all P<0.05).(4)Postoperative imaging follow-up showed that all patients had bone fusion in the bone graft area,and no internal fixation loosening,fracture or pull-out occurred.(5)This method can avoid relying on the doctor's experience and hand feeling,ensure the accuracy of upper cervical screw placement,reduce the risk of surgery,and obtain satisfactory results in mid-term follow-up.
الملخص
ABSTRACT: Objective: Transpedicular fixation has rapidly evolved over the last 100 years. A common complication is screw misplacement which can lead to neurological deficits, vascular damage, or organ perforation. We intend to assess the correlation between screw misplacement and radicular symptoms through the Gertzbein scale. Methods: We conducted an observational longitudinal retrospective study on patients who underwent free-hand lumbar instrumentation surgery with fluoroscopy assistance. The patients were evaluated with postoperative CT scans, and screw positions were classified with the Gertzbein scale. Results: The initial sample included 99 patients who underwent surgery. Of the 317 screws placed, 201 did not show cortical damage, 105 screws exhibited variable invasion, and 11 screws displayed severe invasion. 96.5% screws were placed in the safe zone, with 8.6% of patients (n=5.0) exhibiting transitory weakness. 3.47% of screws (n=11) with severe invasion were seen in 7 patients of which two patients suffered from motor deficient and persistent radicular pain. Conclusion: It is of the utmost importance to pay attention to the precise insertion of the screws to minimize the risk of radicular manifestations. We recommend performing control CT scans after the procedure to ensure the correct insertion of the screws, and in case of finding a screw in a no-safe zone or Getsbein 3 position, considering screw repositioning due to high-risk neurologic damage is highly encouraged. Level of Evidence II; Observational Retrospective Study.
RESUMO: Objetivo: A fixação transpedicular evoluiu rapidamente nos últimos 100 anos, porém o deslocamento do parafuso é uma complicação comum que pode resultar em déficits neurológicos ou danos vasculares. Pretendemos correlacionar o deslocamento do parafuso com sintomas radiculares usando a escala de Gertzbein. Métodos: Conduzimos um estudo retrospectivo longitudinal observacional em pacientes submetidos à cirurgia de instrumentação lombar à mão livre com assistência de fluoroscopia. Os pacientes foram avaliados com tomografia computadorizada pós-operatória e as posições dos parafusos foram classificadas com a escala de Gertzbein. Resultados: A amostra inicial incluiu 99 pacientes. Dos 317 parafusos colocados, 201 não mostraram danos corticais, 105 exibiram invasão variável e 11 invasão severa. 96,5% dos parafusos foram colocados na zona segura, com 8,6% dos pacientes apresentando fraqueza transitório. 3,47% dos parafusos com invasão severa foram observados em 7 pacientes, dos quais 2 sofreram de deficiência motora e dor radicular persistente. Conclusão: É crucial prestar atenção à inserção precisa dos parafusos para minimizar o risco de manifestações radiculares. Recomendamos tomografias de controle para garantir a correta inserção dos parafusos e, se necessário, reposicionamento devido ao alto risco de dano neurológico. Nível de Evidência II; Estudo Observacional Retrospectivo.
RESUMEN: Objetivo: La fijación transpedicular ha evolucionado en los últimos 100 años. Una complicación común es el desplazamiento de tornillos, causante de déficits neurológicos o daños vasculares. Buscamos correlacionar el desplazamiento con síntomas radiculares mediante la escala de Gertzbein. Métodos: Se realizó un estudio observacional longitudinal retrospectivo de pacientes sometidos a cirugía de instrumentación lumbar a mano alzada asistida por fluoroscopia. Los pacientes fueron evaluados con tomografía computarizada postoperatoria y las posiciones de los tornillos se clasificaron con la escala de Gertzbein. Resultados: La muestra inicial incluyó 99 pacientes. De los 317 tornillos colocados, 201 no mostraron daño cortical, 105 mostraron invasión variable y 11 mostraron invasión severa. El 96,5% de los tornillos se colocaron en la zona segura, y el 8,6% de los pacientes mostraron debilidad transitoria. Se observó un 3,47% de tornillos con invasión grave en 7 pacientes, 2 de los cuales sufrieron discapacidad motora y dolor radicular persistente. Conclusión: Es crucial prestar atención a la inserción precisa de los tornillos para minimizar el riesgo de manifestaciones radiculares. Recomendamos la realización de tomografias de control para asegurar la correcta inserción de los tornillos y, en caso necesario, su recolocación debido al elevado riesgo de daño neurológico. Nivel de Evidencia II; Estudio Observacional Retrospectivo.
الموضوعات
Pedicle Screws , Spine , Neurologic Manifestationsالملخص
SUMMARY: The study will provide information on the morphometrics of the vertebrae, which can be used to guide clinicians on the appropriate size of transpedicular screws to use in spine interventions among the Jordanian population and for comparative studies with other races. A retrospective analysis of normal CT scans of the lumbar and thoracolumbar areas was done. Linear and angular measurements of 336 vertebrae were collected for 25 males and 23 females. The results were compared between right and left and between both sexes. The L5 has the longest AVBH and the shortest PVBH in both sexes, it also, had the shortest and widest pedicle in both males and females. ratio of the AVBH to PVBH showed progressive increase in both sexes from T11 to L5. Similarly, the VBW increased progressively from the top to the bottom in both sexes, but it was significantly different between both sexes. The L1 was the most cranially oriented vertebrae in males while the L2 showed the most cranial orientation in females. Both sexes L5 was the most caudally oriented vertebrae. This study provides a database for vertebral morphometrics in the Jordanian population, there are slight differences between the right and left side in the upper studied vertebrae (T11-L2) and some measurement showed significant differences between males and females. These findings need to be taken into consideration when inserting pedicle screws.
Este estudio proporciona información sobre la morfometría de las vértebras, la cual puede ser utilizada por los médicos oara determinar el tamaño adecuado de los tornillos transpediculares a utilizar en intervenciones de columna en la población jordana y para estudios comparativos con otras grupos. Se realizó un análisis retrospectivo de tomografías computarizadas normales de las áreas lumbar y toracolumbar. Se recogieron medidas lineales y angulares de 336 vértebras de 25 hombres y 23 mujeres. Los resultados se compararon entre vértebras derechas e izquierdas y entre ambos sexos. La L5 tiene el AVBH más largo y el PVBH más corto en ambos sexos, también tenía el pedículo más corto y más ancho tanto en hombres como en mujeres. La relación de AVBH a PVBH mostró un aumento progresivo en ambos sexos de T11 a L5. De manera similar, el VBW aumentó progresivamente de arriba hacia abajo en ambos sexos, pero fue significativamente diferente entre ambos sexos. La L1 fue la vértebra más orientada cranealmente en los hombres, mientras que la L2 mostró la orientación más craneal en las mujeres. En ambos sexos L5 fue la vértebra más orientada caudalmente. Este estudio proporciona una base de datos para la morfometría vertebral en la población jordana, donde existen ligeras diferencias entre el lado derecho e izquierdo en las vértebras superiores estudiadas (T11-L2). Algunas mediciones mostraron diferencias significativas entre hombres y mujeres. Estos hallazgos deben tenerse en cuenta al insertar tornillos pediculares.
الموضوعات
Humans , Male , Female , Lumbar Vertebrae/diagnostic imaging , Tomography, X-Ray Computed , Retrospective Studies , Jordan , Lumbar Vertebrae/anatomy & histologyالملخص
Testut & Latarjet (1980), Bouchet & Cuilleret (1986), Latarjet & Liard (2005) y Rouvière & Delmas (2005) describen las relaciones intrínsecas del pedículo renal (PR) a partir de dos planos coronales, siendo la PER el elemento que limita entre ambos. Trivedi et al. (2011) demostró relaciones entre los elementos del PR que no coinciden con las descripciones aportadas por dichos autores.Conocer las posibles variantes en las relaciones intrínsecas del PR es de suma importancia en prácticas quirúrgicas como el trasplante renal (García de Jalón Martínez et al., 2003; Batista Hernández et al., 2010). Por lo tanto, el objetivo del presente trabajo fue analizar las variables relaciones entre los elementos que conforman el PR en la región yuxtahiliar del riñón. Se estudiaron 23 PR, formolizados al 10 % y provistos por el Equipo de Disección de la Segunda Cátedra de Anatomía de la Universidad de Buenos Aires. Se clasificaron los PR en dos grupos. En el Grupo I, las afluentes de origen de la vena renal (AOVR) se hallaban en el mismo plano coronal. En el grupo II, las AOVR se encontraban en diferentes planos coronales. Cada grupo fue subdividido en distintos patrones. Los patrones I y II, de mayor incidencia, fueron asociados al grupo I y los patrones III, IV y V al grupo II. En el patrón I, las AOVR eran anteriores a la pelvis renal (PER) y posteriores a la arteria prepiélica (APP). En el patrón II, las AOVR eran anteriores a la PER y a la APP. Los patrones I y II conforman el grupo I y presentaron mayor número de incidencia en nuestra investigación. Existen también variantes que inciden con menor frecuencia que dichos patrones, estas comprenden el grupo II de la clasificación planteada en el presente trabajo.
SUMMARY: Testut & Latarjet (1980), Bouchet & Cuilleret (1986), Latarjet & Liard (2005) y Rouvière & Delmas (2005) describe the intrinsic relationships of the renal pedicle (PR) from two coronal planes, the renal pelvis (PER) being the element that limits between both. Trivedi et al. (2011) showed relationships between the elements of the RP that do not coincide with the descriptions provided by these authors. Knowing the possible variants in the intrinsic relationships of the RP is of the utmost importance in surgical practices such as renal transplantation (García de Jalón Martínez et al., 2003). Therefore, the objective of this study is to analyze the variable relationships between the elements that make up the RP in the juxtahilar region of the kidney. 23 RP were studied, formalized at 10 % and provided by the Dissection Team of the Second Chair of Anatomy of the University of Buenos Aires. PRs were classified into two groups. In Group I, the tributaries of origin of the renal vein (RVOA) were in the same coronal plane. In group II, the AOVRs were in different coronal planes. Each group was subdivided into different patterns. Patterns I and II, with the highest incidence, were associated with group I and patterns III, IV and V with group II. In pattern I, the VROA were anterior to the renal pelvis (PER) and posterior to the prepelvic artery (PPA). In pattern II, AOVRs were prior to PER and APP. Patterns I and II make up group I and presented a higher number of incidence in our investigation. There are also variants that occur less frequently than these patterns, these comprise group II of the classification proposed in this work.
الموضوعات
Humans , Renal Artery/anatomy & histology , Renal Veins/anatomy & histology , Kidney Pelvis , Cadaver , Anatomic Variation , Kidneyالملخص
SUMMARY: Anatomical variation of the foramina transversaria (FT) is associated with vertebral neurovascular symptoms and can cause complications after lower spine surgery, especially cervical pedicle screw (CPS) insertion. FT variation has been documented and classified in various populations, as this information can help increase cervical stability in subaxial vertebral surgery. Although the morphometry of the upper cervical spine in Thai populations has been reported, there have yet been no studies examining the features of FT. The FT of dried cervical spines (C3-C7; left and right side; n = 107, male = 53 and female = 54) were examined for morphological variation, and their anteroposterior (AP) and transverse (T) diameters were measured using a digital vernier caliper. Morphometric data and variations were compared by sex and lateral side. It was that the C3-C6 FT in both sexes were round, and the C7 FT was elliptical with an oblique right side. FT diameters did not differ significantly by sex except for the AP diameters of C6-C7 and for T diameters of C4 and C7. The left AP diameters of C3-C6 were significantly longer than the right, as were the T diameters of C4 and C7 FT. Additionally, T diameter was significantly longer than that of the AP, except that of the left C6 in male spines, which did not differ from the AP. Most FT examined were round. These findings should be considered in the provisional diagnosis of vertebral neurovascular symptoms caused by FT variation as well as that of neurovascular damage after cervical pedicle screw placement.
La variación anatómica del foramen transverso (FT) se asocia con síntomas neurovasculares vertebrales y puede causar complicaciones después de la cirugía de columna cervical inferior, especialmente la inserción de tornillos pediculares cervicales (TPC). La variación del FT se ha documentado y clasificado en varias poblaciones, ya que esta información puede ayudar a aumentar la estabilidad cervical en la cirugía vertebral subaxial. Aunque se ha informado sobre la morfometría de la columna cervical superior en poblaciones tailandesas, aún no se han realizado estudios que examinen las características de FT. Se examinó la variación morfológica del FT de vértebras cervicales secas (C3-C7; lado izquierdo y derecho; n = 107, hombres = 53 y mujeres = 54), y se midieron sus diámetros anteroposterior (AP) y transverso (T) usando un pie de metro digital. Se compararon datos morfométricos y variaciones por sexo y lado. Los FT de C3-a C6 en ambos sexos eran redondos, y el FT C7 era elíptico con el lado derecho oblicuo. Los diámetros del FT no difirieron significativamente por sexo excepto para los diámetros AP de C6- C7 y para los diámetros transversos de C4 y C7. Los diámetros AP izquierdos de C3-C6 eran significativamente más largos que los del lado derecho, al igual que los diámetros transversos de C4 y C7. Además, el diámetro transverso fue significativamente mayor que el AP, excepto el C6 izquierdo en las vértebras de hombres, que no difirió del AP. La mayoría de los FT examinados eran redondos. Estos hallazgos deben ser considerados en el diagnóstico provisional de síntomas neurovasculares vertebrales causados por la variación del FT, así como en el de daño neurovascular tras la colocación de tornillos pediculares cervicales.
الموضوعات
Humans , Male , Female , Cervical Vertebrae/anatomy & histology , Anatomic Variation , Thailand , Sex Characteristicsالملخص
@#After tooth extraction, labial contour collapses due to inevitable physiologic bone remodeling. To achieve optimal outcomes for pink esthetic treatment at anterior implant sites, bone or soft tissue augmentation has been advocated to maintain or reconstruct the labial tissue contour. When choosing soft tissue augmentation for esthetic restoration, it is necessary to strictly grasp the indications for surgery. Soft tissue augmentation to maintain or reconstruct the labial tissue contour could be considered in patients with healthy soft tissue and no bone defects or only mild horizontal bone defects. In immediate, early and late implant placement, the timing of soft tissue augmentation may vary. In immediate implantation, the labial bone plate is intact, so it is highly recommended to simultaneously manage soft tissue during implant placement. However, patients may have large bone defects with early or late implant placement. The risk of augmenting bone and soft tissue simultaneously is likely too high, and bone augmentation surgery is often performed at the first stage while soft tissue augmentation surgery is performed at the second stage. Therefore, soft tissue surgery is often carried out simultaneously with abutment connection. Currently, soft tissue augmentation is achieved mostly with adjacent autologous soft tissue grafts, such as free gingival grafts, subepithelial connective tissue grafts or pedicle palatal flaps, which are often accompanied by a second surgical area. The replacement of autogenous soft tissue grafting with new biological materials will become an inevitable trend. In this article, we analyze and summarize the indications, timing and different methods of soft tissue augmentation to maintain and reconstruct the labial contour.
الملخص
OBJECTIVE@#To explore the effectiveness of a new point contact pedicle navigation template (referred to as "new navigation template" for simplicity) in assisting screw implantation in scoliosis correction surgery.@*METHODS@#Twenty-five patients with scoliosis, who met the selection criteria between February 2020 and February 2023, were selected as the trial group. During the scoliosis correction surgery, the three-dimensional printed new navigation template was used to assist in screw implantation. Fifty patients who had undergone screw implantation with traditional free-hand implantation technique between February 2019 and February 2023 were matched according to the inclusion and exclusion criteria as the control group. There was no significant difference between the two groups ( P>0.05) in terms of gender, age, disease duration, Cobb angle on the coronal plane of the main curve, Cobb angle at the Bending position of the main curve, the position of the apical vertebrae of the main curve, and the number of vertebrae with the pedicle diameter lower than 50%/75% of the national average, and the number of patients whose apical vertebrae rotation exceeded 40°. The number of fused vertebrae, the number of pedicle screws, the time of pedicle screw implantation, implant bleeding, fluoroscopy frequency, and manual diversion frequency were compared between the two groups. The occurrence of implant complications was observed. Based on the X-ray films at 2 weeks after operation, the pedicle screw grading was recorded, the accuracy of the implant and the main curvature correction rate were calculated.@*RESULTS@#Both groups successfully completed the surgeries. Among them, the trial group implanted 267 screws and fused 177 vertebrae; the control group implanted 523 screws and fused 358 vertebrae. There was no significant difference between the two groups ( P>0.05) in terms of the number of fused vertebrae, the number of pedicle screws, the pedicle screw grading and accuracy, and the main curvature correction rate. However, the time of pedicle screw implantation, implant bleeding, fluoroscopy frequency, and manual diversion frequency were significantly lower in trial group than in control group ( P<0.05). There was no complications related to screws implantation during or after operation in the two groups.@*CONCLUSION@#The new navigation template is suitable for all kinds of deformed vertebral lamina and articular process, which not only improves the accuracy of screw implantation, but also reduces the difficulty of operation, shortens the operation time, and reduces intraoperative bleeding.