الملخص
Este estudio aborda la viabilidad y los retos inherentes al uso de barreras de polímeros impresos en 3D para la regeneración ósea guiada (en adelante, ROG) en procedimientos de implantología dental. A través del análisis exhaustivo de investigaciones y aplicaciones clínicas actuales, se evalúa detalladamente la biocompatibilidad, la funcionalidad estructural y las respuestas biológicas inducidas por estas barreras innovadoras en entornos terapéuticos. Este enfoque permite una comprensión más profunda de las interacciones osteointegrativas y las perspectivas de adaptabilidad tisular asociadas con materiales poliméricos avanzados (AU)
This scholarly investigation delineates the efficacy and inherent challenges of utilizing 3D printed polymer barriers for guided bone regeneration (GBR) in dental implantology procedures. An extensive review of current research and clinical implementations provides a critical assessment of biocompatibility, structural functionality, and the biological responses elicited by these innovative barriers within therapeutic contexts. The study delves into the osteointegrative interactions and tissue adaptability prospects facilitated by advanced polymeric materials, offering significant insights into their clinical utility.(AU)
الموضوعات
Polymers , Bone Regeneration , Printing, Three-Dimensional/trends , Biocompatible Materials/therapeutic use , Osseointegration/physiology , Dental Implantation, Endosseous/methodsالملخص
Resumen El plástico se ha vuelto muy popular en los últimos años gracias a su durabilidad y propiedades. A pesar de sus múltiples ventajas, la humanidad ha desarrollado cierta dependencia hacia este material, lo que ha propiciado un incremento en su uso y, a su vez, en la generación de desechos ante el escaso hábito de reúso. Uno de los polímeros plásticos más usados es el poliestireno (PS), ya que este se usa en una amplia gama de aplicaciones gracias a su bajo costo y fácil producción. Sin embargo, pasado el tiempo de vida útil de este plástico, es considerado como desecho. El PS al estar expuesto a condiciones atmosféricas como la radiación UV, se fragmenta dando como resultado la creación de microplásticos (MP), mismos que son pequeñas partículas que no sobrepasan los 5 mm, lo que representa una amenaza al medio ambiente pues, al degradarse, las propiedades decaen, se genera un cambio dimensional y, además, pueden ser fácilmente transportadas no solo al medio ambiente, sino también a los organismos. Este artículo de revisión se enfoca en evidenciar las principales rutas que siguen los MP al interaccionar con los seres humanos y los efectos potenciales de los PS-MP en el citoesqueleto, así como en resaltar la necesidad de más estudios al respecto.
Abstract Plastic has become very popular in recent years due to its durability and properties. Despite its many advantages, humanity has developed a certain dependence on this material, which represents an increase in its use and in turn, in waste. One of the most widely used plastic polymers is the polystyrene (PS), as is used in a wide range of applications due to its low cost and easy production, although after the useful life of the plastic, it is considered as waste. When plastic is exposure to atmospheric conditions such as UV radiation, it degrades and fragments giving rise to microplastics (MPs), which are defined as small particles that do not exceed 5 mm, representing a threat to the environment because when they degrade the properties decay, a dimensional change is generated and they can also be easily transported not only to the environment but also to organisms. This review article focuses on highlighting the main pathways that MPs follow when interacting with humans and the potential effects of PS-MPs on the cytoskeleton, as well as highlighting the need for more studies in this regard.
الملخص
Abstract This research evaluates the presence of the oxygen-inhibited layer (OIL) on the top surface of a photopolymerized dental composite resin protected with a glycerin layer. This evaluation was conducted using physical and mathematical methods. Polymerized discs were fabricated to evaluate Vickers microhardness (VHN), and pre-and post-polymerized samples were used for the calculation of C-O/C-H ratios through Fourier Transform Infrared Spectroscopy (FTIR) (n=10), using two types of glycerin, one for medical use (MG) and another for dental use (DG). Surface hardness decreased from MG to DG to CO, and the increase in C-O/C-H ratios decreased in the same order (p<0.05). Samples protected with medical and dental glycerin layers are harder and exhibit lower C-O/C-H bond ratios than the control group.
Resumen La presente investigación evalúa la presencia de la capa inhibida por oxígeno OIL en la última superficie fotocurada de una resina compuesta de uso odontológica que fue protegida con una capa de glicerina. Esta evaluación se hizo a partir de métodos físicos y matemáticos. Se fabricaron discos polimerizados para evaluar la microdureza Vickers (VHN) y pre y post polimerizados para el cálculo de tasas C-O/C-H por medio de Espectroscopía Infrarroja Transformada de Fourier (FTIR) (n=10) usando dos tipos de glicerina, una de uso médico (MG) y otra de uso dental (DG). La dureza superficial disminuyó de MG a DG a CO y el aumento de tasas C-O/C-H disminuyó en ese mismo orden (p<0,05). Las muestras protegidas con capas de glicerina médica y odontológica son más duras y presentan menos cantidad tasas de enlaces C-O/C-H que el grupo control.
الموضوعات
Composite Resins/analysis , Glycerol/analysis , Polymers , Spectroscopy, Fourier Transform Infrared , Hardness Testsالملخص
Abstract Objective: In this study, a comparative evaluation of the physicochemical properties of Cention N and other direct restorative materials was performed. Three restorative materials—a resin-modified glass ionomer (Fuji II LC), an alkasite-based resinous material (Cention N), and a resin composite (Tetric N Ceram)—were characterized in terms of degree of conversion, Knoop hardness number (KHN) ratio, flexural strength, elastic modulus, water sorption, water solubility, microshear bond strength to dentin, immediate microleakage, and radiopacity. Methodology: The microshear bond strength to dentin and microleakage of Cention N were evaluated with and without the application of an adhesive system (Tetric N Bond Universal). A one-way ANOVA test was used to analyze the data in terms of degree of conversion, KHN ratio, water sorption, water solubility, microshear bond strength to dentin, and radiopacity. A two-way ANOVA test (carried out considering the material type and ethanol aging as factors) was used to analyze the data in terms of flexural strength and elastic modulus. The Kruskal-Wallis test was used to statistically analyze the data on microleakage. A significance level of α=0.05 was used for all tests. Results: Fuji II LC was found to have the highest degree of conversion, water sorption, and microleakage, as well as the lowest flexural strength. Cention N had the highest solubility; when used with an adhesive system, it achieved bond strength and microleakage similar to those of the Tetric N Ceram composite. Tetric N Ceram had the highest degree of conversion, KHN ratio, and radiopacity. Conclusion: The properties of Cention N validate its efficacy as an alternative direct restorative material when used in conjunction with an adhesive system.
الملخص
O objetivo desta pesquisa foi a identificação, por meio de espectroscopia no infravermelho com transformada de Fourier combinada com reflectância total atenuada (FTIR-ATR), de microplásticos extraídos do trato gastrointestinal de peixes coletados no Lago de Amatitlán, para determinar os principais polímeros e a possível origem da contaminação por esses materiais. Foram analisados 68 microplásticos, correspondendo a 10% do total de microplásticos extraídos. Estes originaram-se de 36 espécimes, sendo 35 da espécie Oreochromis niloticus e um de Parachromis managuensis, dos quais foram analisados de 1 a 5 microplásticos por espécime. Os polímeros identificados foram polipropileno (PP), nylon, polietileno de alta densidade (HDPE), tereftalato de polietileno (PET), látex, poliestireno (PE), polietileno de baixa densidade (LDPE) e poliuretano (PU). O polipropileno (32), o polietileno de alta densidade (13) e o nylon (10) foram os polímeros mais frequentes. Os possíveis itens plásticos que podem ter originado os microplásticos incluem brinquedos, equipamentos de laboratório, baldes, embalagens de alimentos, tubulações, isolamento para cabos, têxteis, cordas e móveis que são produzidos na indústria do plástico, localizada principalmente na vertente sul da cidade da Guatemala. Além disso, as espécies de peixes do presente estudo sustentam pescarias importantes, o que levanta problemas de saúde humana, uma vez que a ingestão de peixes que consomem plásticos tem o potencial de aumentar a carga corporal de substâncias químicas perigosas, pois estas aderem superficialmente aos plásticos no ambiente e são posteriormente bioacumuladas.
The objective of this research was the identification, through Fourier transform infrared spectroscopy combined with attenuated total reflectance (FTIR-ATR), of microplastics extracted from the gastrointestinal tract of fish collected in Lake Amatitlán, to determine the main polymers and the possible origin of contamination by these materials. 68 microplastics were analyzed, corresponding to 10% of the total microplastics extracted. These originated from 36 specimens, 35 of the species Oreochromis niloticus and one of Parachromis managuensis, of which 1 to 5 microplastics per specimen were analyzed. The polymers identified were polypropylene (PP), nylon, high-density polyethylene (HDPE), polyethylene terephthalate (PET), latex, polystyrene (PE), low-density polyethylene (LDPE) and polyurethane (PU). Polypropylene (32), high-density polyethylene (13) and nylon (10) were the most frequent polymers. Possible plastic items that may have caused microplastics include toys, laboratory equipment, buckets, food packaging, pipes, insulation for cables, textiles, ropes and furniture that are produced in the plastics industry, located mainly on the south side of Guatemala City. Furthermore, the fish species in the present study support important fisheries, which raises human health concerns, since the ingestion of fish that consume plastics has the potential to increase the body load of dangerous chemicals, as they adhere superficially to the plastics in the environment and are subsequently bioaccumulated.
الملخص
Case description: A 42-year-old woman with severe pulmonary and mediastinal inflammatory involvement, secondary to infiltration of a silicone-related allogenic material with systemic migration. Clinical findings: The patient developed esophageal and bronchial stenosis, recurrent infections, malnutrition, and respiratory deterioration, making surgical removal of the allogenic material impossible. Treatment and outcome: Clinical and radiological improvement was achieved after treatment with multiple intravenous and oral immunomodulators. Clinical relevance: Autoimmune/inflammatory syndrome induced by adjuvants (ASIA) is a heterogeneous disease resulting from exposure to allogenic substances in a susceptible subject. These substances cause autoimmune or autoinflammatory phenomena. Since ASIA was described ten years ago, its diagnostic criteria are still under discussion, with an uncertain prognosis. The ideal therapy is based on eliminating the causative substance, but this is not always possible. Therefore, it is necessary to start an immunomodulatory treatment, using it in this patient, a scheme that had not been previously reported in the literature.
Descripción del caso: Mujer de 42 años con compromiso inflamatorio pulmonar y mediastinal severo, secundario a infiltración de un material alogénico relacionado con la silicona con migración sistémica. Hallazgos clínicos: La paciente desarrolló estenosis esofágica y bronquial, infecciones recurrentes, desnutrición y deterioro respiratorio, imposibilitando la extracción quirúrgica del material alogénico. Tratamiento y resultado: Mejoría clínica y radiológica lograda tras un tratamiento con múltiples inmunomoduladores intravenosos y orales. Relevancia clínica: El síndrome autoinmune / inflamatorio inducido por adyuvantes (ASIA) es una enfermedad heterogénea que resulta de la exposición a sustancias alógenas en un sujeto con susceptibilidad genética. Estas sustancias inducen fenómenos autoinmunitarios o autoinflamatorios. Desde que ASIA fue descrito hace 10 años, sus criterios diagnósticos continúan en discusión, con un pronóstico incierto. El tratamiento idóneo se basa en eliminar la sustancia causante, pero no siempre es posible, por lo cual se hace necesario iniciar un tratamiento inmunomodulador, empleándose en esta paciente un esquema que no había sido reportado previamente en la literatura.
الملخص
Buccal tablets
Diclofenac sodium
Drug release
Mucoadhesion
Mucoadhesive tablets
Release kinetics
الملخص
Organic acids are organic compounds that can be synthesized using biological systems. They often contain one or more low molecular weight acidic groups, such as carboxyl group and sulphonic group. Organic acids are widely used in food, agriculture, medicine, bio-based materials industry and other fields. Yeast has unique advantages of biosafety, strong stress resistance, wide substrate spectrum, convenient genetic transformation, and mature large-scale culture technology. Therefore, it is appealing to produce organic acids by yeast. However, challenges such as low concentration, many by-products and low fermentation efficiency still exist. With the development of yeast metabolic engineering and synthetic biology technology, rapid progress has been made in this field recently. Here we summarize the progress of biosynthesis of 11 organic acids by yeast. These organic acids include bulk carboxylic acids and high-value organic acids that can be produced naturally or heterologously. Finally, future prospects in this field were proposed.
الموضوعات
Saccharomyces cerevisiae/metabolism , Organic Chemicals , Carboxylic Acids/metabolism , Metabolic Engineering , Fermentation , Acidsالملخص
Molecularly imprinted polymers demonstrate outstanding performance in the research on trace ingredients because of their high selectivity. Stimuli-responsive molecularly imprinted polymers(STR-MIPs) with the introduction of different responsive groups on the basis of traditionally imprinted materials can undergo reversible transformations when exposed to external stimuli such as temperature, magnetism, pH or light. Such responsiveness, combined with the specific recognition, endows STR-MIPs with excellent perfor-mance in trace component studies. Traditional Chinese medicine(TCM) contains complex components with trace content, and thus STR-MIPs have broad application prospects in the enrichment analysis of trace components in TCM. This paper elaborates on the application of STR-MIPs in the enrichment analysis of trace components in TCM from the perspectives of different stimuli, summarized relevant research achievements in the recent five years to broaden the application fields of molecular imprinting, and proposed a few opi-nions about their future development.
الملخص
The properties of dry-coated paracetamol particles(fast-dissolving model drug)with carnauba wax particles as the coating agent(dissolution retardant)were investigated.Raman mapping technique was used to non-destructively examine the thickness and homogeneity of coated particles.The results showed that the wax existed in two forms on the surface of the paracetamol particles,forming a porous coating layer:i)whole wax particles on the surface of paracetamol and glued together with other wax surface particles,and ii)deformed wax particles spread on the surface.Regardless of the final particle size fraction(between 100 and 800 μm),the coating thickness had high variability,with average thickness of 5.9±4.2 μm.The ability of carnauba wax to decrease the dissolution rate of paracetamol was confirmed by dissolution of powder and tablet formulations.The dissolution was slower for larger coated particles.Tableting further reduced the dissolution rate,clearly indicating the impact of subsequent formulation processes on the final quality of the product.
الملخص
Objective:To investigate the clinical efficacy of carbomer hemorrhoid gel in the treatment of second-degree internal hemorrhoid bleeding.Methods:A total of 160 anorectal outpatients with second-degree internal hemorrhoid bleeding who received treatment in Zhuhai Hospital of Integrated Traditional Chinese and Western Medicine from January 2017 to January 2021 were included in this study. They were randomly divided into an observation group and a control group ( n = 80/group). In the observation group, carbomer hemorrhoid gel was used to plug the anus, while in the control group, a hemorrhoid suppository was used to plug the anus. All patients were treated for 7 days. Clinical efficacy was compared between the two groups. Results:After 4 days of treatment, the bleeding score in the observation group was lower than that in the control group [1(0) point vs. 2(1) points, Z = -6.70, P < 0.05). After 7 days of treatment, the bleeding score in the observation group was significantly lower than that in the control group [0(1) point vs. 1(1) point, Z = -4.73, P < 0.05]. After 4 days of treatment, there was no significant difference in the size score of the hemorrhoids between the two groups ( P > 0.05). After 4 days of treatment, the size score of hemorrhoids in the control group did not differ significantly compared with before treatment ( P > 0.05). After 4 days of treatment, the size score of hemorrhoids in the observation group differed significantly compared with before treatment ( Z = -3.16, P < 0.05). After 7 days of treatment, the size score of the hemorrhoids in the observation group was lower than that in the control group [1(1) point vs. 1(0) point, Z = -4.48, P < 0.05]. The total response rate in the observation group was significantly higher than that in the control group [97.5% (78/80) vs. 75% (60/80), Z = -4.50, P < 0.05]. Conclusion:Carbomer hemorrhoid gel is a new drug used to treat hemorrhoids. It has a new dosage form, has no stimulation to the rectum, and is safe to use. Carbomer hemorrhoid gel is highly effective on second-degree internal hemorrhoid bleeding and deserves clinical popularization.
الملخص
Objective:To prepare nanoprobes by using polydopamine (PDA) as a carrier which is modified with the sonosensitizer protoporphyrin Ⅸ (PpⅨ) and labeled with 131I, 99Tc m or 177Lu, and to explore the value of these new nanoprobes in diagnosis and combination therapy of breast cancer. Methods:PDA particles were synthesized by aqueous oxidation, and a layer of polyethylene glycol (PEG) and PpⅨ were modified on the surface to product PDA-PEG-PpⅨ. Then the nuclides 131I, 99Tc m and 177Lu were labeled on PDA, respectively, and the labeling yield and stability were determined. The cytotoxicity test was conducted by comparing the viabilities of 4T1 tumor cells in free 131I group and 131I-PDA-PEG-PpⅨ group. The 4T1 cells were divided into 7 groups according to different treatment methods: PDA-PEG-PpⅨ group, PDA-PEG-PpⅨ+ photothermal therapy (PTT) group, PDA-PEG-PpⅨ+ sonodynamic therapy (SDT) group, 131I-PDA-PEG-PpⅨ+ PTT group, 131I-PDA-PEG-PpⅨ+ SDT group, 131I-PDA-PEG-PpⅨ+ PTT+ SDT group (100 μg/ml PDA-PEG-PpⅨ, 925 kBq/ml 131I), and the control group (DMEM culture medium). The cell viabilities of those groups were compared to evaluate the therapeutic effect. 4T1 tumor bearing mouse models were established, then 99Tc m-PDA-PEG-PpⅨ was injected through the tail vein (29.6 MBq) or intratumorally (14.8 MBq) to perform gamma imaging. The independent-sample t test and one-way analysis of variance were used for data analysis. Results:The PDA particles were uniform in size, with a particle size of (160.0±1.5) nm. They had a good photothermal conversion effect. A characteristic peak consistent with PpⅨ (400 nm) appeared in the UV-Vis absorption spectrum of PDA-PEG-PpIX. In the cytotoxicity test, when the radioactivity was 1.850 or 3.700 or 7.400 MBq/ml, the cell viabilities of free 131I group and 131I-PDA-PEG-PpⅨ group were significantly different ((72.18±6.57)% vs (86.07±5.17)%, (59.31±9.06)% vs (80.85±4.21)%, (42.90±1.30)% vs (72.99±5.73)%; t values: 3.71, 4.82, 11.46, P values: 0.006, 0.001, <0.001). The 131I-PDA-PEG-PpⅨ+ PTT+ SDT combination therapy had a better killing effect on 4T1 tumor cells than the combination of 131I-PDA-PEG-PpⅨ+ PTT and 131I-PDA-PEG-PpⅨ+ SDT (cell viabilities: (10.09±2.50)% vs (16.04±2.63)%, (28.65±4.72)%; F=351.66, P<0.001). In vivo imaging showed that 99Tc m-PDA-PEG-PpⅨ was stable in mouse models and could be effectively enriched in tumors. Conclusions:A multifunctional nanoprobe based on PDA is successfully prepared. The radionuclide labeling method is simple and effective, with a good stability. 131I-PDA-PEG-PpⅨ can kill 4T1 cells efficiently. 99Tc m-PDA-PEG-PpⅨ has an obvious tumor concentration effect in mouse models.
الملخص
ABSTRACT The use of removable partial dentures is considered a common and inexpensive treatment option to rehabilitate edentulous areas. The aim of this study was to evaluate the effect of different materials for provisional removable partial dentures, an in vitro study on surface roughness and fracture resistance. Thermopolymerizable acrylic resin and thermoplastic resin specimens with dimensions of 10 x 10 x 2 mm (blocks) (n=10) and with dimensions of 65 x 20 x 3 mm (bars) (n=10 were analyzed for their surface roughness (Ra) and three-point flexural strength test. All specimens were subjected to oven aging for 60 days at 37°C±0.5°C in distilled water. The statistical analysis was performed with a significance level of 5%, and the surface roughness data were submitted to the Two-way Anova statistical test (P < 0.05) and the mechanical strength data were subjected to One-way Anova statistical test (P < 0.05). For roughness, the factor resin type (P = 0.000) and the factor aging (P = 0.000) were statically significant, as well as showing interaction (P = 0.228). The Thermopolymerizable acrylic resin had the lowest mean roughness values compared to the thermoplastic resin and showed no statistical difference after aging. The same scenario was repeated for flexural strength values; Thermopolymerizable acrylic resin was statistically superior to thermoplastic resin (P = 0.000). Thermopolymerized acrylic resin showed lower surface roughness values and higher flexural strength values compared to thermoplastic resin.
RESUMO O uso de próteses parciais removíveis é considerado uma opção de tratamento comum e de baixo custo para reabilitar áreas edêntulas. O objetivo deste estudo foi avaliar o efeito de diferentes materiais para próteses parciais removíveis provisórias, um estudo in vitro sobre rugosidade superficial e resistência à fratura. Espécimes de resina acrílica termopolimerizável e de resina termoplástica com dimensões de 10 x 10 x 2 mm (blocos) (n = 10) e de 65 x 20 x 3 mm (barras) (n = 10) foram analisados em rugosidade superficial média (Ra) e teste de resistência à flexão de três pontos. Todos os espécimes foram submetidos ao envelhecimento em estufa por 60 dias a 37 ° C ± 0,5 ° C em água destilada. A análise estatística se deu com nível de significância de 5%, e os dados de rugosidade superficial foram submetidos ao teste estatístico Anova dois fatores (P <0,05) e os dados de resistência mecânica foram submetidos ao teste estatístico Anova um fator (P <0,05). Para rugosidade, o fator tipo resina (P = 0,000) e o fator envelhecimento (P = 0,000) foram estatisticamente significantes, além de apresentar interação (P = 0,228). A resina acrílica termopolimerizável apresentou menores valores médios de rugosidade em relação à resina termoplástica e não apresentou diferença estatística após envelhecimento. O mesmo cenário foi repetido para valores de resistência à flexão; a resina acrílica termopolimerizável foi estatisticamente superior à resina termoplástica (P = 0,000). A resina acrílica termopolimerizada apresentou menores valores de rugosidade superficial e maiores valores de resistência à flexão em relação à resina termoplástica.
الملخص
Purpose: To evaluate the in vivo efficiency of commercial polymeric membranes for guided bone regeneration. Methods: Rat calvarial critical size defects was treated with LuminaCoat (LC), Surgitime PTFE (SP), GenDerm (GD), Pratix (PR), Techgraft (TG) or control (C-) and histomorphometric analysis determined the percentage of new bone, connective tissue and biomaterial at 1 or 3 months. Statistical analysis used ANOVA with Tukey's post-test for means at same experimental time and the paired Student's t test between the two periods, considering p < 0.05. Results: New bone at 1 month was higher for SP, TG and C-, at 3 months there were no differences, and between 1 and 3 months PR had greater increase growthing. Connective tissue at 1 month was higher for C-, at 3 months for PR, TG and C-, and between 1 and 3 months C- had sharp decline. Biomaterial at 1 month was higher for LC, in 3 months for SP and TG, and between 1 and 3 months, LC, GD and TG had more decreasing mean. Conclusion: SP had greater osteopromotive capacity and limitation of connective ingrowth, but did not exhibit degradation. PR and TG had favorable osteopromotion, LC less connective tissue and GD more accelerated biodegradation.
الموضوعات
Animals , Rats , Polymers/therapeutic use , Skull/abnormalities , Biocompatible Materials/analysis , Bone Regeneration , Collagen , Guided Tissue Regeneration/veterinaryالملخص
Aim: This study assessed the effect of thermal aging on the interfacial strength of resin cements to surface-treated PEEK. Methods: Ninety-six PEEK blocks were allocated into 4 groups (n=24), according to following surface treatments: SB - sandblasting with aluminum oxide; SA - acid etched with 98% sulfuric acid; CA coupling agent (Visio.link, Bredent) and CO - control group (untreated). Surface roughness (Ra) was measured and one cylinder (1-mm diameter and height) of Rely-X Ultimate - ULT (3M/ESPE) and another one of Panavia V5 - PAN (Kuraray) were constructed on the treated or untreated PEEK surfaces. Half of the samples of each group were thermal aged (1,000 cycles). Samples were tested at a crosshead speed of 1 mm/min in shear mode (µSBS). Ra and µSBS data were compared using one- and three-way ANOVA, respectively, and Tukey's tests. Results: SA and SB samples had the roughest surfaces, while CA the smoother (p<0.001). Thermal aging reduced µSBS regardless the surface treatment and resin cement used. There was interaction between surface treatment and resin cement (p <0.001), with ULT showing higher µSBS values than PAN. SA provided higher µSBS than SB for both resin cements, while for CA µSBS was higher (PAN) or lower than SB (ULT). Conclusion: Aging inadvertently reduces interfacial strength between PEEK and the resin cements. If ULT is the resin cement of choice, reliable interfacial strength is reached after any PEEK surface treatment. However, if PAN is going to be used only SA and CA are recommended as PEEK treatment
الموضوعات
Polymers , Aging , Resin Cements , Shear Strengthالملخص
Objective: to evaluate the effect of material type and veneer thickness on the final color and shear bond strength of PEEK bilayered restorations. Material and Methods: sixty-four square-shaped core specimens (7×7×2), were fabricated by CAD/CAM technology from two high-strength polymers, BioHPP (High-Performance Polymer, group B n=32), and Pekkton® ivory (PolyEtherKetoneKetone, group P n=32) then were veneered with resin composite (crea.lign dentin A3). Specimens from each group were divided (n=16) according to the veneer layer thickness (0.5 & 1 mm), then according to the test applied (n=8), either ΔE or shear bond strength (SBS). Specimen surfaces were treated according to the manufacturer's instructions. Specimens were veneered according to the manufacturer's instructions.The mode of failure was evaluated under a stereomicroscope at 40 x magnification after the shear bond strength test. Results: data showed parametric distribution and variance homogeneity and were analyzed using two-way ANOVA. The significance level was set at p<0.05 for all tests. Statistical analysis was performed with the R statistical analysis software version 4.3.1.Results of two-way ANOVA showed that material types and veneer thicknesses had an individual significant effect on the color change. For the shear bond strength, only the sample thickness (1mm) had a significant effect (p=0.033). The majority of samples in different groups presented a mixed failure mode with all the differences being not statistically significant (p>0.05). Conclusion: the thickness of the resin composite veneer can significantly affect the final esthetic outcome and shear bond strength of a bilayered restoration.(AU)
Objetivo: avaliar o efeito do tipo de material e da espessura do revestimento na cor final e na resistência ao cisalhamento de restaurações em duas camadas de PEEK. Material e Métodos: foram fabricados 64 espécimes com núcleo de formato quadrado (7x7x2) usando tecnologia CAD/CAM a partir de dois polímeros de alta resistência, BioHPP (Polímero de Alto Desempenho, grupo B n=32) e Pekkton ivory (Polieterecetona cetona, grupo P n=32), que foram então revestidos com resina composta (crea.lign dentin A3). Os espécimes de cada grupo foram divididos (n=16) de acordo com a espessura do revestimento (0,5 e 1 mm), e depois de acordo com o teste aplicado (n=8), seja ΔE ou resistência ao cisalhamento (SBS). As superfícies dos espécimes foram tratadas de acordo com as instruções do fabricante. Os espécimes foram revestidos de acordo com as instruções do fabricante. O modo de falha foi avaliado sob um estereomicroscópio com ampliação de 40x após o teste de resistência ao cisalhamento. Resultados: os dados apresentaram distribuição paramétrica e homogeneidade de variância e foram analisados por ANOVA de duas vias. O nível de significância foi estabelecido em p<0,05 para todos os testes. A análise estatística foi realizada com o software de análise estatística R, versão 4.3.1. Os resultados da ANOVA de duas vias mostraram que os tipos de materiais e as espessuras do revestimento tiveram um efeito significativo individual na mudança de cor. Para a resistência ao cisalhamento, apenas a espessura da amostra (1mm) teve um efeito significativo (p=0,033). A maioria das amostras em diferentes grupos apresentou um modo de falha misto, com todas as diferenças não sendo estatisticamente significativas (p>0,05). Conclusão:a espessura do revestimento de resina composta pode afetar significativamente o resultado estético final e a resistência ao cisalhamento de uma restauração em duas camadas.(AU)
الموضوعات
Polymers , Composite Resins , Shear Strengthالملخص
Resumo Introdução Após o advento dos termoplásticos de baixa temperatura, sua prevalência na confecção de órteses para membros superiores é identificada por vários autores. A compreensão de suas propriedades, por parte do terapeuta ocupacional e de outros profissionais que atuam na área, é importante no processo de seleção do termoplástico, que segue uma lógica para combinar as características do material à função desejável para cada órtese. Objetivos Sistematizar as características dos termoplásticos de baixa temperatura e, a partir disso, elaborar um instrumento para realizar testes práticos empíricos com os materiais a fim de estabelecer critérios para o seu manuseio e avaliação. Método Pesquisa de caráter exploratório, constituindo a criação de procedimentos de teste e, consequentemente, a elaboração de um instrumento de avaliação de abordagem qualitativa e que valoriza a experiência prática do profissional, que manipula o material e avalia cada requisito. Resultados O instrumento criado contempla 14 caraterísticas do material, acompanhadas de uma definição, um procedimento com recomendações para o teste prático e um campo destinado ao preenchimento das alternativas de resposta. Conclusão O instrumento considera características importantes a serem verificadas durante a avaliação dos materiais e poderá direcionar o olhar e os registros do profissional, auxiliando o nas decisões clínicas. Isso será importante para melhorar a qualidade das órteses e de outros dispositivos de Tecnologia Assistiva confeccionados com esse grupo de materiais. Além disso, a sistematização da avaliação prática dos materiais termoplásticos poderá auxiliar no desenvolvimento de estudos da área da saúde e de pesquisas envolvendo materiais para órteses.
Abstract Introduction After the advent of low-temperature thermoplastics, their prevalence in the manufacture of orthoses for upper limbs has been identified by several authors. The understanding of their properties by occupational therapists and other professionals working in this field is important in the process of selecting the thermoplastic, which follows a logic to match the material's characteristics to the desired function for each orthosis. Objectives Systematize the characteristics of low-temperature thermoplastics and, from that, develop an instrument for carrying out practical empirical tests with the materials, to establish criteria for their handling and evaluation. Method Exploratory study consisting of the creation of testing procedures and, consequently, the development of a qualitative assessment instrument that values the practical experience of the professional who handles the material and evaluates each requirement. Results The created instrument includes 14 material characteristics, accompanied by a definition, a procedure with recommendations for the practical testing, and a field for filling in response alternatives. Conclusions The instrument considers important characteristics to be verified during the evaluation of materials and can direct the professional's observations and records, aiding in clinical decision-making. This will be important to improve the quality of orthoses and other assistive technology devices made with these thermoplastics. In addition, the systematization of the practical evaluation of thermoplastic materials can assist in the development of health studies and research involving materials for orthoses.
الملخص
1,4-alpha-D-glucan glucanohydrolase is among the most widely used commercial hydrolytic enzymes acting randomly on the glycosidic linkages of starch resulting in its saccharification and liquefaction. Its applicability in different industries can be improved by enhancing its stability and reusability. Therefore, in the present study attempts have been made to enhance the industrial applicability of 1,4-alpha-D-glucan glucanohydrolase from Bacillus subtilis KIBGE-HAR by adapting immobilization technology. The study developed mechanically stable, enzyme containing gel-frameworks using two support matrices including agar-agar, a natural polysaccharide and polyacrylamide gel, a synthetic organic polymer. These catalytic gel-scaffolds were compared with each other in terms of kinetics and stability of entrapped 1,4-α-D-glucan glucanohydrolase. In case of polyacrylamide gel, Km value for immobilized enzyme increased to 7.95 mg/mL, while immobilization in agar-agar resulted in decreased Km value i.e 0.277 mg/mL as compared to free enzyme. It was found that immobilized enzyme showed maximum activity at 70 °C in both the supports as compared to free enzyme having maximum activity at 60 °C. Immobilized 1,4-α-D-glucan glucanohydrolase exhibited no change in optimal pH 7.0 before and after entrapment in polyacrylamide gel and agar-agar. The enzyme containing gel-scaffold was found suitable for repeated batches of starch liquefaction in industrial processes. Agar-agar entrapped 1,4-α-D-glucanglucanohydrolase was capable to degrade starch up to seven repeated operational cycles whereas polyacrylamide entrapped enzyme conserved its activity up to sixth operational cycle.
الموضوعات
Polymers , Kinetics , Amylasesالملخص
The aim of the present study is the Evaluation, preparation, and description of chitosan nanoparticles and bioavilibility enhancement of rivaroxaban. Preparation of Rivaroxaban nanoparticles (RB-NPs) were prepared by the ionic gelation method. Different parameters were studied for evaluation, Preparation & description of nanoparticles. The results of the present study showed that the formulation F7 showed the significant results for all the selected parameter as compared to the other formulations. The formulation F1, F5, and F6 showed the highest production yield (52.5, 52.35, and 52.35% respectively) and F7 showed the significant production yield (51.85%), zeta-potential (23.63 mV), entrapment efficiency (99.87), particle size (316.12±2.14 nm) and poly disparity index (0.32). Nanoparticles are solid colloidal drug carriers ranging from 10—1000 nm in diameter and are composed of synthetic, natural or semi-synthetic polymers encapsulating the drug molecule.
الملخص
A engenharia de tecidos ósseos é um ramo importante da medicina regenerativa e envolve o desenvolvimento de arcabouços com composição e arquitetura favoráveis à integração celular, além do estudo de fatores capazes de promover a adesão e proliferação celular, incluindo estímulos químicos e biofísicos. O objetivo do estudo foi avaliar a utilização do laser de baixa intensidade (LBI) como uma ferramenta para promover a bioestimulação in vitro de células osteoblásticas cultivadas em arcabouços nanofibrosos de ácido polilático (PLA). Os arcabouços foram produzidos pela técnica de eletrofiação e caracterizados quanto à molhabilidade, composição pela espectroscopia no infravermelho por transformada de Fourier (FTIR), morfologia da superfície por microscópica eletrônica de varredura (MEV), caracterização termogravimétrica (TGA), calorimetria diferencial exploratória (DSC) e cristalinidade por difração de raios-X (DRX). Os ensaios biológicos foram conduzidos com osteoblastos da linhagem OFCOL II cultivados na superfície dos arcabouços e submetidos ou não (grupo controle) a irradiação com laser diodo InGaAIP na potência de 30 mW, nas doses de 1, 4 e 6 J/cm² e nos comprimentos de onda de 660 nm (grupos V1, V4, V6, respectivo as doses) e 780 nm (grupos I1, I4 e I6, respectivo as doses). Os efeitos do LBI na proliferação dos osteoblastos foram avaliados através do método bioquímico Alamar Blue, nos intervalos de 24, 48 e 72h, enquanto a viabilidade e a morfologia celular foram analisadas no intervalo de 72h, através do ensaio Live/Dead e da microscopia eletrônica de varredura (MEV), respectivamente. Os dados do ensaio bioquímico de Alamar Blue mostraram uma maior proliferação celular nos grupos V6 em todos os intervalos analíticos em comparação ao grupo controle (p<0,05). Outras diferenças entre o grupo controle e irradiados foram encontradas apenas nos intervalos de 48h e 72h para V1, e para o grupo IV6 em 72h. O ensaio Live/Dead revelou um aumento na viabilidade celular nos grupos trados com LBI, sendo significativamente maior no grupo V1 quando comparado ao grupo controle. A análise por MEV mostrou adequada interação dos osteoblastos aos arcabouços, com o corpo celular se espalhando ao longo do eixo da nanofibra e a presença de contatos físicos mais evidentes, através da formação de ligação por meio de filopódios e lamelipódios, nos grupos V1, V6 e I6. Em conjunto, os dados do presente trabalho mostraram que o LBI promove a bioestimulação de osteoblastos cultivados sobre nanofibras de PLA, o que aponta para o seu uso potencial nas técnicas de engenharia tecidual óssea, sobretudo no que se refere ao uso do comprimento de onda de 660 nm, a qual apresentou grupos com mais resultados significativos (AU).
Bone tissue engineering is a relevant branch of regenerative medicine and involves the development of scaffolds with composition and architecture favorable to cell integration, in addition to studying factors capable of promoting cell adhesion and proliferation, including chemical and biophysical stimuli. The study aimed to evaluate the use of low-level laser irradiation (LLLI) to promote in vitro biostimulation of osteoblastic cells cultured on polylactic acid (PLA) nanofibrous scaffolds. The scaffolds were produced by the electrospinning technique and characterized in terms of wettability, composition by Fourier transform infrared spectroscopy (FTIR), surface morphology by scanning electron microscopy (SEM), thermogravimetric characterization (TGA), differential scanning calorimetry (DSC) and crystallinity by Xray diffraction (XRD). The biological assays were conducted with osteoblasts of the OFCOL II lineage cultured on the surface of the scaffolds and submitted or not (control group) to irradiation with InGaAIP diode laser, power of 30 mW, with doses of 1, 4 and 6 J/cm² and wavelengths of 660 nm (groups V1, V4, V6, respectively doses) and 780 nm (groups I1, I4 and I6, respectively doses). The effects of LLLT from the perspective of osteoblasts were evaluated using the biochemical method Alamar Blue assay, at intervals of 24, 48 and 72h, while cell viability and morphology were observed at 72h, using the Live/Dead assay and electron microscopy. scan (SEM), respectively. The Alamar Blue assay data showed more significant cell proliferation in groups in the V6 groups at all analytical intervals compared to the control group (p<0.05). Other differences between the control and irradiated groups were found only at intervals of 48h and 72h for V1, and for group IV6 at 72h. The Live/Dead assay revealed an increase in cell viability in the groups treated with LLLT, being significantly higher in the V1 group when compared to the control group. SEM analysis showed adequate interaction between osteoblasts and scaffolds, with the cell body spreading along the nanofiber axis and the presence of more evident physical contacts, through the formation of bonds through filopodia and lamellipodia, in groups V1, V6 and I6. Together, the data from the present study observed that LLLT promotes the biostimulation of osteoblasts cultured on PLA nanofibers, which pointed to its potential use in bone tissue engineering techniques, especially with regard to the use of the wavelength of 660 nm, which presented groups with more significant results (AU).