الملخص
The extraction of geraniol from palmarosa oil using hydrotropic solvents was investigated. Palmarosa oil possesses an appealing rose aroma and properties like anti - inflammatory, antifungal, and antioxidant due to the presence of geraniol. The extraction of geraniol from palmarosa oil by using distillation methods like steam dis tillation and fractional distillation was a laborious process. So hydrotropes were tried for extraction. The geraniol yield and purity depend on parameters like concentration of hydrotrope, solvent volume ratio, and time period. Using the Box Benkhem Desig n (BBD), the extraction process was optimized. One of the major advantages of using hydrotropic solvents is that they were classified as green solvents, and recovery of solvents is also possible. To reduce the extraction time probe sonication is carried ou t. Different hydrotropic solvents with probe sonication are done on palmarosa oil by altering various process parameters to study the separation, yield, and purity.
Se investigó la extracción de geraniol del aceite de palmarosa utilizando solventes hidrotrópicos. El aceite de palmarosa posee un atractivo aroma a rosa y propiedades antiinflamatorias, antifúngicas y antioxidantes debido a la pr esencia de geraniol. La extracción de geraniol del aceite de palmarosa mediante métodos de destilación como la destilación por vapor y la destilación fraccionada ha sido un proceso laborioso. Por lo tanto, se probaron los hidrotropos para la extracción. El rendimiento y la pureza del geraniol dependen de parámetros como la concentración del hidrotropo, la relación de volumen del solvente y el período de tiempo. Se optimizó el proceso de extracción usando el diseño Box Benkhem (BBD). Una de las principales v entajas de usar solventes hidrotrópicos es que se clasifican como solventes verdes y también es posible recuperar los solventes. Para reducir el tiempo de extracción, se lleva a cabo una sonda de ultrasonido. Se realizan diferentes solventes hidrotropos co n sonda de ultrasonido en el aceite de palmarosa alterando varios parámetros del proceso para estudiar la separación, el rendimiento y la pureza.
الموضوعات
Plant Oils/chemistry , Cymbopogon/chemistry , Acyclic Monoterpenes/chemistry , Chromatography, Gasالملخص
Objective To prepare silymarin phospholipids complex(SM-PC) and investigate its physicochemical properties. Methods On the basis of single-factor tests, the drug-lipid ratio, drug concentration and reaction temperature were selected as the factors of the central composite design and response surface methodology in the preparation of SM-PC by solvent volatilization, and the best process was optimized with the compound rate as the index. And its in vitro dissolution was measured. Results The optimum preparation technology of SM-PC was as follows: acetone was used as compound solvent, the concentration of SM was 8.0 mg/ml, the mass ratio of SM to phospholipid was 1∶1.8, the reaction temperature was 56 ℃ and the recombination rate was(95.15±1.55)% with deviation of less than 3%. The in vitro dissolution test showed that the dissolution of SM-PC was close to 90% in 60 min. The dissolution behavior of main component of silybin was similar to that of silymarin capsules(Legalon ®), which was higher than SM-API. Conclusion SM-PC was successfully prepared by central composite design response surface method, which significantly improved the dissolution and laid a foundation for the study of subsequent preparations.
الملخص
Objective To optimize the optimal extraction process for phthalein and phenolic acid components in Angelicae Sinensis Radix-Chuanxiaong Rhizoma decoction pieces.Methods On the basis of a single factor experiment,central combination design-response surface methodology was adopted,and the extraction time,ethanol concentration,and ethanol dosage were used as influencing factors,and the total normalized values of the content of Senkyunolide I,Senkyunolide A and ligustilide,and extract yield were used as evaluation indicators to optimize the extraction process of phthalein components in Angelicae Sinensis Radix-Chuanxiaong Rhizoma decoction pieces;the total normalized values of chlorogenic acid,caffeic acid,ferulic acid,and extract yield were used as evaluation indicators to optimize the extraction process of phenolic acids components in Angelicae Sinensis Radix-Chuanxiaong Rhizoma decoction pieces.Results The optimal extraction process was to add 7 times the amount of 90%ethanol to the phthalein components,extract for 130 minutes each time,and extract twice;phenolic acid components were extracted twice with 7.5 times the amount of 65%ethanol for 120 minutes each time.Conclusion The optimized extraction process for phthalein and phenolic acids in Angelicae Sinensis Radix-Chuanxiaong Rhizoma decoction pieces is stable and feasible,which can provide a basis for subsequent research.
الملخص
Objective To optimize the extraction process of total phenolic acids from Cibotii rhizoma using Box-Behnken design-response surface methodology and evaluate antioxidant activity of total phenolic acid in vitro.Methods Taking the liquid-solid ratio,ethanol concentration and extraction temperature as influencing factors,and the extraction rate of total phenolic acids as evaluation indicator,the extraction process of total phenolic acids from Cibotii rhizoma was optimized using a three-factor and three-level Box-Behnken design-response surface methodology on the basis of single factor tests.Meanwhile,the scavenging effects of total phenolic acid extract from Cibotii rhizoma on ABTS·+and DPPH· was determined.Results The optimized extraction process for total phenolic acids from Cibotii rhizoma was as follows:the ethanol concentration of 55%,the extraction temperature of 88℃ and the liquid-solid ratio of 60∶1 mL/g.Under these conditions,the extraction rate could reach 8.67%.When the mass concentration of total phenolic acids extract were 2 mg/mL and 1 mg/mL,the clearance rates of ABTS·+and DPPH·were 92.76%and 88.66%,respectively.Conclusion The theoretical values obtained from the response surface optimization method are consistent with the actual measured values,and the extraction process of total phenolic acids from Cibotii rhizoma was simple and feasible.The total phenolic acids extract from Cibotii rhizoma exhibit strong antioxidant activity in vitro.
الملخص
ObjectiveBased on response surface methodology combined with principal component analysis(PCA), the optimal decocting process of Moringa oleifera leaf standard decoction was optimized, and its multi-index quality evaluation system was established, in order to provide scientific basis for the quality control of this standard decoction. MethodResponse surface methodology and PCA were used to optimize the decoction process by taking the relative peak areas of 8 characteristic peaks and dry extract yield as indexes. Based on this, the quality of 15 batches of the standard decoction was evaluated by high performance liquid chromatography(HPLC) characteristic chromatogram, determination of major components(neochlorogenic acid, L-tryptophan, cryptochlorogenic acid, vicenin-2, isoquercetin, astragalin), determination of active parts(total flavonoids, total organic acids, total polysaccharides, total α-amino acids, total sinapine), dry extract yield, specific gravity and pH. ResultThe optimal decocting process was to soak M. oleifera leaves(100.00 g) for 30 min and decoct twice with the first decoction of 12 times the amount of water for 30 min and the second decoction of 10 times the amount of water for 20 min. Standard decoction containing 0.2 g·mL-1 of crude drug was defined by x¯±30%, the specific gravity was 0.722-1.340, pH was 3.86-7.16, dry extract yield was 23.1%-42.9%, and the alcohol-soluble extract content was 8.26%-15.34%. Calculated according to the dried products of the standard decoction, the contents of neochlorogenic acid, L-tryptophan, cryptochlorogenic acid, vicenin-2, isoquercetin and astragalin were 1.99-3.69, 1.20-2.22, 1.44-2.67, 0.53-0.99, 2.45-4.55, 1.22-2.26 mg·g-1, the relative transfer rates relative to the herbs were 34.37%-63.83%, 62.43%-115.94%, 64.65%-120.06%, 56.98%-105.82%, 37.46%-69.57%, 41.81%-77.64%, respectively. The contents of total flavonoids, total organic acids, total polysaccharides, total α-amino acids, total sinapine were 10.19-18.92, 11.82-21.96, 94.07-174.71, 42.69-79.27, 9.55-17.73 mg·g-1, the relative transfer rates for herbs were 25.72%-47.77%, 41.78%-77.59%, 64.90%-120.54%, 42.30%-78.57%, 34.99%-64.99%, respectively. ConclusionThe optimized decocting technology of M. oleifera leaf standard decoction is stable and feasible, and the established multi-indicator quality evaluation system can lay the foundation for the quality control of this standard decoction.
الملخص
OBJECTIVE To optimize the preparation technology of ethanol extracts from Centipeda minima, and investigate the anti-inflammatory activities of different extraction sites. METHODS Single factor test and response surface methodology were adopted to investigate the effects of ethanol volume fraction, extraction time, solid-liquid ratio and extraction times on the heating reflux extraction technology of total triterpenoids ethanol extract using the extraction rate of total triterpenoids of C. minima as indexes, optimize the extraction technology and carry out validation. Using dexamethasone as positive control drug, the effects of different extraction sites of C. minima (petroleum ether part, ethyl acetate part, n-butanol part, water part) on nitric oxide (NO) production in mononuclear macrophage RAW 264.7 cells of mice induced by lipopolysaccharide (LPS) were compared; the half inhibitory concentration (IC50) was calculated. RESULTS The optimal extraction technology of total triterpenoids ethanol extracts of C. minima was as follows: ethanol volume fraction of 70%, solid-liquid ratio of 1∶40 (g/mL), extraction time of 2.0 h and extraction times of 3 times. The 3 times of validation tests showed that average extraction rate of total triterpenoids of C. minima was 1.134%, relative error of which with the predicted value was 0.02%. The petroleum ether part and ethyl acetate part of C. minima could inhibit the generation of NO in RAW 264.7 cells induced by lipopolysaccharide to different degrees. IC50 values of NO production were 2.44 μg/mL and 2.22 μg/mL, respectively, and both of them were lower than those of positive control drug dexamethasone (7.65 μg/mL). CONCLUSIONS The optimized preparation process of ethanol extracts from C. minima is stability and feasibility. The petroleum ether part and ethyl acetate part have obvious anti-inflammatory effects.
الملخص
Huoluo Xiaoling Dan is a classical prescription commonly used for blood circulation and pain relief in clinic with obvious effects. To make it directly treat lesion and improve the effect, this research optimized the preparation process of Huoluo Xiaoling gel paste and further evaluated its in vitro transdermal absorption performance, so as to provide a scientific basis for its development and utilization. Using primary viscosity, holding viscosity, and sensory score as evaluation indexes, the matrix amount of gel paste was determined by the single factor test and Box-Behnken response surface method. The ultra-performance liquid chromatography(UPLC) method was established to determine the content of eight active ingredients, including Danshensu, ferulic acid, salvianolic acid B, salvianolic acid A, ligustilide, tanshinone Ⅱ_A, 11-keto-β-boswellic(KBA), and 3-acetyl-11-keto-β-boswellic acid(AKBA). A mo-dified Franz diffusion cell method was used to evaluate and compare the absorption properties of the gel paste without volatile oil and with volatile oil microemulsion. The results showed that the optimal prescription for Huoluo Xiaoling gel paste matrix was NP700(1.35 g), glycerol(7.00 g), micropowder silica gel(1.25 g), sodium carboxymethyl cellulose(0.20 g), tartaric acid(0.06 g), and glyceryl aluminum(0.04 g). The mass fractions of eight active ingredients in the paste were successively 0.48, 0.014, 0.95, 0.39, 0.57, 0.055, 0.35, and 0.97 mg·g~(-1). The results of the in vitro transdermal absorption test showed that the addition of the volatile oil or the volatile oil microemulsion promoted the transdermal absorption of the active ingredients, and the law of drug penetration conformed to the zero equation or the Higuchi equation. The gel paste prepared by the optimal prescription has good appearance and adhesion, with no residue, and has the characteristics of skeletal slow-release preparation, which is easy to reduce the number of administration, la-ying a foundation for the development of new external dosage forms of Huoluo Xiaoling Dan.
الموضوعات
Administration, Cutaneous , Skin Absorption , Chromatography, Liquid , Oils, Volatile , Viscosityالملخص
The weight coefficients of appearance traits, extract yield of standard decoction, and total content of honokiol and magnolol were determined by analytic hierarchy process(AHP), criteria importance though intercrieria correlation(CRITIC), and AHP-CRITIC weighting method, and the comprehensive scores were calculated. The effects of ginger juice dosage, moistening time, proces-sing temperature, and processing time on the quality of Magnoliae Officinalis Cortex(MOC) were investigated, and Box-Behnken design was employed to optimize the process parameters. To reveal the processing mechanism, MOC, ginger juice-processed Magnoliae Officinalis Cortex(GMOC), and water-processed Magnoliae Officinalis Cortex(WMOC) were compared. The results showed that the weight coefficients of the appearance traits, extract yield of standard decoction, and total content of honokiol and magnolol determined by AHP-CRITIC weighting method were 0.134, 0.287, and 0.579, respectively. The optimal processing parameters of GMOC were ginger juice dosage of 8%, moistening time of 120 min, and processing at 100 ℃ for 7 min. The content of syringoside and magnolflorine in MOC decreased after processing, and the content of honokiol and magnolol followed the trend of GMOC>MOC>WMOC, which suggested that the change in clinical efficacy of MOC after processing was associated with the changes of chemical composition. The optimized processing technology is stable and feasible and provides references for the modern production and processing of MOC.
الموضوعات
Zingiber officinale , Magnolia/chemistry , Drugs, Chinese Herbal/chemistry , Biphenyl Compounds/chemistry , Lignans/chemistryالملخص
Objective Optimizing the extraction process of prescription medicinal materials of hospital preparation of compound Yangshe granules. Methods A high performance liquid chromatograph (HPLC) quantitative method was established for deacetyl asperulosidicacid methyl ester (DME) and ferulic acid (FC) of the active ingredient. Based on the content of DME, FC and the yield of extract, the extraction process of compound Yangshe granule extract was optimized using central composite design-response surface methodology. Results The established HPLC method of quantification of active components in compound Yangshe granules met the requirements of method validation. The optimal extraction process optimized by central composite design-response surface methodology were as follows: the weight of extraction solvent was 12 times of the medicinal slices, the alcohol concentration was 73% and the extraction time was 60 min. Conclusion In this study, the quantitative method of active components in compound Yangshe granule by HPLC has been successfully established, and the optimized extraction process is simple and easy to operate with good repeatability.
الملخص
Objective To optimize the extraction process of Puji disinfection oral liquid.Methods Based on Box-Behnken design,the extraction process of volatile oil was optimized with the extraction rate of volatile oil as index.Based on Box-Behnken design combined with G1-entropy weight method,the extraction rate and dry extract rate of(R,S)-epigoitrin,hesperidin,baicalin,berberine hydrochloride and arctiin were used as indices to optimize the water extraction process.Results The optimum extraction conditions of volatile oil from Puji disinfection oral liquid were as follows:adding 10 times of water,soaking time of 1.5 h and extraction time of 5 h.The optimal water extraction process was as follows:10 times of water,1.8 h of extraction time and 2 times of extraction.Under the optimal extraction conditions,there was no significant difference among the three batches of verification tests.Conclusion The optimized extraction process is stable and feasible,which can provide the basis for the subsequent experimental study and industrial production of Puji disinfection oral liquid.
الملخص
Objective:To optimize the extraction process of Shangke Huoxue Granule.Methods:Taking the factors of extraction solvent multiple, extraction time and extraction times as investigation factors, and extraction amount of ferulic acid, paeoniflorin and the ratio of extraction as comprehensive evaluation indices, one-factor experimental design and central composite design-response surface methodology were adopted to optimize the extraction process of Shangke Huoxue Granule.Results:The binomial fitting equation was Y=96.16+2.42 A+0.63 B-3.76 AB-1.57 A2-1.87 B2 ( P<0.01). The optimal extraction process parameters were confirmed to be adding 16 times of water, 64 minutes each time, twice. The deviation rates between the measured values of three verification experiments and the predicted value were 2.00%, 3.23% and 0.66%. Conclusion:The established model of central composite design-response surface methodology has high predictability and the optimized extraction process is stable and feasible.
الملخص
This study first optimized the processing technology for Zhangbang vinegar-processed Olibanum and investigated its in vitro anticoagulant activity. A multi-index-response surface methodology was used, with yield, powder yield, and the relative percentage of the content of six non-volatile components [11-keto-boswellic acid(KBA), 3-acetyl-11-keto-boswellic acid(AKBA), β-elemonic acid, α-boswellic acid(α-BA), β-boswellic acid(β-BA), and α-acetyl-boswellic acid(α-BA)] and three volatile components(octyl acetate, incensole, and incensole acetate) as evaluation indicators. Analytical hierarchy process(AHP) combined with coefficient of variation method was used to calculate the weight of each indicator and calculate the comprehensive score(OD). Furthermore, response surface methodology was used to investigate the effects of frying temperature(A), burning time(B), rice vinegar dosage(C), and steaming time(D) on the processing technology of vinegar-processed Olibanum. Vinegar-steamed Olibanum was prepared according to the optimal processing technology for in vitro anticoagulant experiments. The results showed that the weights of octyl acetate, incensole, incensole acetate, KBA, AKBA, β-elemonic acid, α-BA, β-BA, α-ABA, yield, and powder yield were 0.358 2, 0.104 5, 0.146 4, 0.032 9, 0.123 7, 0.044 4, 0.022 1, 0.042 2, 0.110 1, 0.012 2, and 0.0032, respectively. The optimal processing technology for Zhangbang vinegar-processed Olibanum was as follows. Olibanum(50 g) with a particle size of 1-5 mm was continuously stir-fried at a low heat of 150-180 ℃ until in a gel-like state, ignited for burning for 15 s, sprayed with 7.5 g of rice vinegar(15%), and steamed for 3 min without fire. Subsequently, the cover was removed, and the product was continuously stir-fried at 150-180 ℃ until in a soft lump shape, removed, cooled, and crushed. The results of the in vitro anticoagulant experiments showed that compared with the blank group, both Olibanum and vinegar-processed Olibanum significantly prolonged the activated partial thromboplastin time(APTT), thrombin time(TT), and prothrombin time(PT) of rat platelet-poor plasma(PPP), and the effect of vinegar-processed Olibanum was significantly better than that of Olibanum(P<0.05). The optimized processing technology for Zhangbang vinegar-processed Olibanum is stable, feasible, and beneficial for the further development and utilization of Olibanum slices. At the same time, using the content of volatile and non-volatile components, yield, and powder yield as indicators, and verifying through pharmacological experiments, the obtained results are more reasonable and credible, and have positive guiding significance for the clinical application of characteristic processed Olibanum products.
الموضوعات
Rats , Animals , Frankincense , Acetic Acid , Powders , Triterpenes , Anticoagulants/pharmacology , Technologyالملخص
Based on the concept of quality by design(QbD), the Box-Behnken design-response surface methodology combined with standard relation(SR) and analytic hierarchy process(AHP)-entropy weight method(EWM) was applied to optimize the extraction process of the classic prescription Yihuang Decoction. The content of geniposidic acid, phellodendrine hydrochloride, and berberine hydrochloride in Yihuang Decoction, the extract yield, and fingerprint similarity were used as the critical quality attributes(CQAs) of the extraction process. The extraction time, water addition, and extraction times were used as the critical process parameters(CPPs). After determining the levels of each factor and level through single-factor experiments, response surface experiments were designed according to the Box-Behnken principle, and the experimental results were analyzed. The SR between each sample and the reference sample under various evaluation indicators of different extraction parameters was calculated. The weights of the five evaluation indicators were determined using AHP-EWM, followed by comprehensive evaluation. A function model between CPPs and CQAs characterized by comprehensive scores was established to predict the optimal extraction process parameters. In the final comprehensive weight coefficients, the yield rate accounted for 43.1%, and the content of berberine hydrochloride, phellodendrine hydrochloride, and geniposidic acid accounted for 35.1%, 6.3%, and 15.5%, respectively. After comprehensive score analysis with SR, the established second-order polynomial model was statistically significant(P<0.01, and the lack of fit was not significant). The predicted optimal extraction conditions for Yihuang Decoction were determined as follows: 8-fold volume of water, extraction time of 1.5 h, and extraction once. The mean comprehensive score of the validation experiment was 85.77, with an RSD of 0.99%, and it met the quality control stan-dards for the reference sample of Yihuang Decoction. The results indicate that the optimized extraction process for Yihuang Decoction is stable and reliable, and the water extract is close in quality attributes to the reference sample. This can serve as a foundation for the research and development of granules in the future. Box-Behnken design-response surface methodology combined with SR and AHP-EWM can provide references for the modern extraction process research of other classic prescriptions.
الموضوعات
Drugs, Chinese Herbal , Analytic Hierarchy Process , Berberine , Entropy , Waterالملخص
Today, global focus of research is to explore the solution of energy crisis and environmental pollution. Like other agricultural countries, bulk quantities of watermelon peels (WMP) are disposed-off in environment as waste in Pakistan and appropriate management of this waste is the need of hour to save environment from pollution. The work emphasizes the role of ethanologenic yeasts to utilize significant sugars present in WMP for low-cost bioethanol fermentation. Dilute hydrochloric acid hydrolysis of WMP was carried out on optimized conditions employing RSM (response surface methodology) following central composite design (CCD). This experimental design is based on optimization of ethanologenesis involving some key independent parameters such as WMP hydrolysate and synthetic media ratio (X1), incubation temperature (X2) and incubation temperature (X3) for maximal ethanol yield exploiting standard (Saccharomyces cerevisiae K7) as well as experimental (Metchnikowia cibodasensisY34) yeasts. The results revealed that maximal ethanol yields obtained from S. cerevisiae K7 was 0.36±0.02 g/g of reducing sugars whereas M. cibodasensisY34, yielded 0.40±0.01 g ethanol/g of reducing sugars. The yeast isolate M. cibodasensisY34 appeared as promising ethanologen and embodies prospective potential for fermentative valorization of WMP-to-bioethanol.
Hoje, o foco global da pesquisa é explorar a solução da crise energética e da poluição ambiental. Como em outros países agrícolas, grandes quantidades de cascas de melancia (WMP) são descartadas como resíduos no meio ambiente no Paquistão, mas a gestão adequada desses resíduos é a mais recente solução para salvar o meio ambiente da poluição. O trabalho enfatiza o papel das leveduras etanologênicas para utilizar açúcares significativos presentes no WMP para fermentação de bioetanol de baixo custo. A hidrólise de ácido clorídrico diluído de WMP foi realizada em condições otimizadas empregando RSM (metodologia de superfície de resposta) e seguindo o projeto de composto central (CCD). Este projeto experimental é baseado na otimização da etanologenesis envolvendo alguns parâmetros independentes importantes, como hidrolisado de WMP e razão de meio sintético (X1), temperatura de incubação (X2) e temperatura de incubação (X3) para rendimento máximo de etanol explorando o padrão (Saccharomyces cerevisiae K7) também como leveduras experimentais (Metchnikowia cibodasensis Y34). Os resultados revelaram que os rendimentos máximos de etanol obtidos a partir de S. cerevisiae K7 foi de 0,36 ± 0,02 g / g de açúcares redutores, enquanto M. cibodasensis Y34 rendeu 0,40 ± 0,01 g de etanol / g de açúcares redutores. O isolado de levedura M. cibodasensis Y34 apareceu como um etanologeno promissor e incorpora um potencial prospectivo para a valorização fermentativa de WMP em bioetanol.
الموضوعات
Citrullus/chemistry , Fermentation , Bioreactors , Garbageالملخص
Abstract Today, global focus of research is to explore the solution of energy crisis and environmental pollution. Like other agricultural countries, bulk quantities of watermelon peels (WMP) are disposed-off in environment as waste in Pakistan and appropriate management of this waste is the need of hour to save environment from pollution. The work emphasizes the role of ethanologenic yeasts to utilize significant sugars present in WMP for low-cost bioethanol fermentation. Dilute hydrochloric acid hydrolysis of WMP was carried out on optimized conditions employing RSM (response surface methodology) following central composite design (CCD). This experimental design is based on optimization of ethanologenesis involving some key independent parameters such as WMP hydrolysate and synthetic media ratio (X1), incubation temperature (X2) and incubation temperature (X3) for maximal ethanol yield exploiting standard (Saccharomyces cerevisiae K7) as well as experimental (Metchnikowia cibodasensisY34) yeasts. The results revealed that maximal ethanol yields obtained from S. cerevisiae K7 was 0.36±0.02 g/g of reducing sugars whereas M. cibodasensisY34, yielded 0.40±0.01 g ethanol/g of reducing sugars. The yeast isolate M. cibodasensisY34 appeared as promising ethanologen and embodies prospective potential for fermentative valorization of WMP-to-bioethanol.
Resumo Hoje, o foco global da pesquisa é explorar a solução da crise energética e da poluição ambiental. Como em outros países agrícolas, grandes quantidades de cascas de melancia (WMP) são descartadas como resíduos no meio ambiente no Paquistão, mas a gestão adequada desses resíduos é a mais recente solução para salvar o meio ambiente da poluição. O trabalho enfatiza o papel das leveduras etanologênicas para utilizar açúcares significativos presentes no WMP para fermentação de bioetanol de baixo custo. A hidrólise de ácido clorídrico diluído de WMP foi realizada em condições otimizadas empregando RSM (metodologia de superfície de resposta) e seguindo o projeto de composto central (CCD). Este projeto experimental é baseado na otimização da etanologenesis envolvendo alguns parâmetros independentes importantes, como hidrolisado de WMP e razão de meio sintético (X1), temperatura de incubação (X2) e temperatura de incubação (X3) para rendimento máximo de etanol explorando o padrão (Saccharomyces cerevisiae K7) também como leveduras experimentais (Metchnikowia cibodasensis Y34). Os resultados revelaram que os rendimentos máximos de etanol obtidos a partir de S. cerevisiae K7 foi de 0,36 ± 0,02 g / g de açúcares redutores, enquanto M. cibodasensis Y34 rendeu 0,40 ± 0,01 g de etanol / g de açúcares redutores. O isolado de levedura M. cibodasensis Y34 apareceu como um etanologeno promissor e incorpora um potencial prospectivo para a valorização fermentativa de WMP em bioetanol.
الملخص
Abstract Today, global focus of research is to explore the solution of energy crisis and environmental pollution. Like other agricultural countries, bulk quantities of watermelon peels (WMP) are disposed-off in environment as waste in Pakistan and appropriate management of this waste is the need of hour to save environment from pollution. The work emphasizes the role of ethanologenic yeasts to utilize significant sugars present in WMP for low-cost bioethanol fermentation. Dilute hydrochloric acid hydrolysis of WMP was carried out on optimized conditions employing RSM (response surface methodology) following central composite design (CCD). This experimental design is based on optimization of ethanologenesis involving some key independent parameters such as WMP hydrolysate and synthetic media ratio (X1), incubation temperature (X2) and incubation temperature (X3) for maximal ethanol yield exploiting standard (Saccharomyces cerevisiae K7) as well as experimental (Metchnikowia cibodasensisY34) yeasts. The results revealed that maximal ethanol yields obtained from S. cerevisiae K7 was 0.36±0.02 g/g of reducing sugars whereas M. cibodasensisY34, yielded 0.40±0.01 g ethanol/g of reducing sugars. The yeast isolate M. cibodasensisY34 appeared as promising ethanologen and embodies prospective potential for fermentative valorization of WMP-to-bioethanol.
Resumo Hoje, o foco global da pesquisa é explorar a solução da crise energética e da poluição ambiental. Como em outros países agrícolas, grandes quantidades de cascas de melancia (WMP) são descartadas como resíduos no meio ambiente no Paquistão, mas a gestão adequada desses resíduos é a mais recente solução para salvar o meio ambiente da poluição. O trabalho enfatiza o papel das leveduras etanologênicas para utilizar açúcares significativos presentes no WMP para fermentação de bioetanol de baixo custo. A hidrólise de ácido clorídrico diluído de WMP foi realizada em condições otimizadas empregando RSM (metodologia de superfície de resposta) e seguindo o projeto de composto central (CCD). Este projeto experimental é baseado na otimização da etanologenesis envolvendo alguns parâmetros independentes importantes, como hidrolisado de WMP e razão de meio sintético (X1), temperatura de incubação (X2) e temperatura de incubação (X3) para rendimento máximo de etanol explorando o padrão (Saccharomyces cerevisiae K7) também como leveduras experimentais (Metchnikowia cibodasensis Y34). Os resultados revelaram que os rendimentos máximos de etanol obtidos a partir de S. cerevisiae K7 foi de 0,36 ± 0,02 g / g de açúcares redutores, enquanto M. cibodasensis Y34 rendeu 0,40 ± 0,01 g de etanol / g de açúcares redutores. O isolado de levedura M. cibodasensis Y34 apareceu como um etanologeno promissor e incorpora um potencial prospectivo para a valorização fermentativa de WMP em bioetanol.
الموضوعات
Cucurbitaceae , Ethanol , Saccharomyces cerevisiae , Water , Biotransformation , Prospective Studies , Fermentationالملخص
Proteases are ubiquitously present and are among the largest groups of commercially important enzymes. Here, we investigated a wood-rot basidiomycete Trametes versicolor (L.) Lloyd [Syn. Coriolus versicolor (L.) Quél.; Polyporus versicolor (L.) Fr.] as a source of the enzyme serine protease, its production, and optimized to obtain a higher yield of the enzyme.. The significant variables with optimized values for maximum production of the enzyme were temperature (30?C), incubation time (120 h) and wheat bran (10 g). The yield increased by 30.76% by statistically optimizing the media. The optimized temperature and pH for the maximum protease activity was 50?C and pH 7.0, respectively. The enzyme was purified through ion exchange (using DEAE cellulose 52 resin) and gel filtration chromatography (using Superdex 200 column). The purified enzyme had a retention time of 7 min in RP-HPLC. The enzyme was stable at a broad range of temperature (30-60?C) and pH (5.0-8.0) with a half-life of 58.72 min, Vmax of 37.17 ?M min/mL and Km of 0.657 mg/mL. Its activity was enhanced by Na+, Ca2+, Mg2+ ions and SDS surfactant. These properties make this enzyme a valuable candidate for industrial applications
الملخص
Biofuel is one of the best ways to reduce our dependence on fossil fuels. Ever since commercial biodiesel production began, waste glycerol, the biodiesel byproduct, has gained researchers’ interest, especially its recycling. Here, we explored using glycerol residue (carbon source) as a substrate in the fermentation process for ethanol production by Escherichia coli K12 in anaerobic conditions. The factors affecting the ethanol production was optimised by response surface methodology (RSM). Significant variables that impact the ethanol concentration were pH, temperature and the substrate, with a statistically significant effect (P <0.05) on ethanol formation. The significant factor was analyzed by the Box-Behnken design. The optimum conditions for bioethanol formation using glycerol as substrate was obtained at pH 7 and temperature 37°C. The ethanol productivity was 0.77 g/L/h. The ethanol concentration of 9.2 g/L achieved from glycerol residue was close to the theoretical value with the fermentation achieved at optimised terms.
الملخص
Cookies are versatile foods that can supply specific needs and can be used as food vehicles to increase the intake of various nutrients. The objective was to create a gluten-free butter cookie based on rice flour (Oryza sativa). A central composite design 22 was used for analyzing the substitution of rice flour for bean flour (Phaseolus vulgaris, L.) (0-60%) and the substitution of butter for avocado puree (Persea americana) (0-100%). Response Surface Methodology were used to analyze the data with a significance of 10% (p<0.1) and a minimum R2 of 0.6. Variables analyzed were protein content (%), fat content (%), spread ratio, weight loss (%), water activity, moisture content (%), and ash content (%). Increases in the percentage of substitution of bean flour and avocado puree increased the amount of protein, ash, and moisture significantly. Fat content increased significantly following the decrease in avocado substitution. The minimum weight loss was obtained on intermediate values of bean flour. Water activity and spread ratio were not affected by changes in the variables measured. Three different formulas were obtained for the optimization: 46% bean flour and 86% of avocado puree, a formulation with an appropriate moisture range by reducing the lipid oxidation (59% bean flour and 82% avocado puree), and a formulation with 100% avocado (40% bean flour and 100% avocado puree). Sensory evaluation results of optimized treatments indicated that the formula with 46% bean flour and 86% avocado puree presented the highest global acceptance. Results from this study showcase the possibility of producing gluten-free cookies with good protein content.
Las galletas son alimentos versátiles que pueden suplir necesidades específicas y ser utilizados como vehículos para aumentar la ingesta de distintos nutrientes. El objetivo fue elaborar galletas de mantequilla libres de gluten a base de harina de arroz. Se realizó un diseño central compuesto 22 donde se estudió la sustitución parcial de harina de arroz por harina de frijol (Phaseolus vulgaris, L.) (0-60%) y la sustitución de la mantequilla por puré de aguacate (Persea americana) (0-100%). Los resultados fueron analizados por la Metodología de Superficie de Respuesta con un nivel de significancia del 10% (p<0.1) y con un mínimo R2 de 0.6. Las variables de respuesta fueron: proteína (%), grasa (%), diámetro/altura, pérdida de peso (%), humedad (%) y cenizas (%). A valores altos de las dos variables estudiadas la cantidad de proteína, de cenizas y de humedad aumentó significativamente. La cantidad de grasa se incrementó al utilizar bajos niveles de puré de aguacate. Los menores valores de pérdida de peso se obtuvieron en niveles intermedios de harina de frijol. La relación diámetro/altura no fue afectada por las variables estudiadas. Al optimizar se obtuvieron 3 formulaciones diferentes: 46% de harina de frijol y 86% puré de aguacate; 59% de frijol y 82% de puré de aguacate y otra (no estadística) 40% de frijol y 100% de puré de aguacate. Los resultados del análisis sensorial de las muestras optimizadas indicaron que la formulación con mayor aceptación global fue la elaborada con 46% de harina de frijol y 86% de puré de aguacate, concluyendo que es posible elaborar una galleta libre de gluten y con una adecuada cantidad de proteína.
الملخص
The objective of this research work is related to the fact that the source of isolation and acclimatization process influences the microorganism’s potential for the decolorization of various substances. Some of the widely used anthraquinone vat dyes decolorization by the pure bacterial strain is a significant aspect that will assist in the in-situ bioremediation of the ecosystem.The present study is to evaluate the enhanced decolorization of Vat Brown R by an isolated bacterium, Pseudomonas aeruginosa NCH, from textile dye wastewater under aerobic conditions. The effect of pH, temperature, and inoculum size was optimized using response surface methodology with the box-behnken experimental design. The strain NCH showed maximum decolorization efficacy under optimum conditions at pH9.76, temperature 34.69?C, and an inoculum size of 9.51% (v/v), respectively. A decolorization of 90.34% was observed with 100 mg L?1of Vat Brown R within 18h under these conditions. Confirmatory experiments have verified the optimum combination of the three variables predicted by RSM. Kinetics study was carried out using various approaches: Michaelis-Menten (Vmax = 29.1 mg L?1 h?1 and Km = 25.2 mg L?1), Lineweaver-Burk (Vmax = 30.12 mg L?1 h?1 and Km = 26.91 mg L?1), and Eadie-hofstee model (Vmax = 30.23 mg L?1h?1and Km = 27.29 mg L?1), and the results showed that the degradation followed a first-order reaction kinetics. The subsequent degradation of the dye and the formation of metabolites were studied using analytical techniques such as UV-vis spectroscopy and FT-IR analysis. UV-vis spectroscopy validated the detoxification of the dye and confirmed that Pseudomonas sp. NCH overcomes this decolorizing activity through biodegradation. This study investigated the highest decolorization efficiency of strain NCHused in the biodegradation of wastewaters containing anthraquinone dyes.