Your browser doesn't support javascript.
loading
تبين: 20 | 50 | 100
النتائج 1 - 13 de 13
المحددات
إضافة المرشحات








النطاق السنوي
1.
J. appl. oral sci ; J. appl. oral sci;27: e20180233, 2019. tab, graf
مقالة ي الانجليزية | LILACS, BBO | ID: biblio-975899

الملخص

Abstract Objective: To analyze color change, microhardness and chemical composition of enamel bleached with in-office bleaching agent with different desensitizing application protocols. Materials and Methods: One hundred and seventeen polished anterior human enamel surfaces were obtained and randomly divided into nine groups (n = 13). After recording initial color, microhardness and chemical composition, the bleaching treatments were performed as G1: Signal Professional White Now POWDER&LIQUID FAST 38% Hydrogen peroxide(S); G2: S+Flor Opal/0.5% fluoride ion(F); G3: S+GC Tooth Mousse/Casein Phosphopeptide-Amorphous Calcium Phosphate (CPP-ACP) paste(TM); G4: S+UltraEZ/3% potassium nitrate&0.11% fluoride(U); G5: S+Signal Professional SENSITIVE PHASE 1/30% Nano-Hydroxyapatite (n-HAP) suspension(SP); G6: S-F mixture; G7: S-TM mixture; G8: S-U mixture; G9: S-SP mixture. Color, microhardness and chemical composition measurements were repeated after 1 and 14 days. The percentage of microhardness loss (PML) was calculated 1 and 14 days after bleaching. Data were analyzed with ANOVA, Welch ANOVA, Tukey and Dunnett T3 tests (p<0.05). Results: Color change was observed in all groups. The highest ΔE was observed at G7 after 1 day, and ΔE at G8 was the highest after 14 days (p<0.05). A decrease in microhardness was observed in all groups except G6 and G7 after 1 day. The microhardness of all groups increased after 14 days in comparison with 1 day after bleaching (p>0.05). PML was observed in all groups except G6 and G7 after bleaching and none of the groups showed PML after 14 days. No significant changes were observed after bleaching at Ca and P levels and Ca/P ratios at 1 or 14 days after bleaching (p>0.05). F mass increased only in G2 and G6, 1 day after bleaching (p<0.05). Conclusions: The use of desensitizing agents containing fluoride, CPP-ACP, potassium nitrate or n-HAP after in-office bleaching or mixed in bleaching agent did not inhibit the bleaching effect. However, they all recovered microhardness of enamel 14 days after in-office bleaching.


الموضوعات
Humans , Tooth Bleaching/methods , Dental Enamel/drug effects , Dentin Desensitizing Agents/chemistry , Tooth Bleaching Agents/chemistry , Reference Values , Saliva, Artificial/chemistry , Spectrometry, X-Ray Emission , Spectrophotometry , Surface Properties/drug effects , Time Factors , Materials Testing , Calcium Phosphates/chemistry , Microscopy, Electron, Scanning , Caseins/chemistry , Random Allocation , Reproducibility of Results , Analysis of Variance , Potassium Compounds/chemistry , Color , Statistics, Nonparametric , Dental Enamel/chemistry , Hardness Tests , Hydrogen Peroxide/chemistry , Nitrates/chemistry
2.
J. appl. oral sci ; J. appl. oral sci;25(1): 34-41, Jan.-Feb. 2017. tab, graf
مقالة ي الانجليزية | LILACS, BBO | ID: biblio-841160

الملخص

Abstract Objective The aim of this in vitro study was to investigate the effect of two desensitizing agents and water on hydraulic conductance in human dentin. Material and Methods GLUMA Desensitizer PowerGel (GLU) contains glutaraldehyde (GA) and 2-hydroxyethyl methacrylate (HEMA), and Teethmate Desensitizer (TD) is a powder comprising tetracalcium phosphate (TTCP) and dicalcium phosphate anhydrous (DCPA) that is mixed with water. Deionized water was used as a negative control (CTR). Thirty discs with a thickness of 1.2 mm were cut from the coronal dentin of the third molars and cleaned with 0.5 M EDTA (pH 7.4). After being mounted in a split-chamber device, the discs were pressurized with water at 1 kPa and 3 kPa in order to measure flow rates with a highly sensitive micro-flow sensor and to calculate hydraulic conductance as a baseline value (BL). Following the application of GLU, TD, and CTR (n=10), hydraulic conductance was remeasured with intermittent storage in water after 15 min, 1 d, 1 w, and 1 m. Reduction in permeability (PR%) was calculated from hydraulic conductance. Data were statistically analyzed using nonparametric methods (α<0.05). Representative discs were inspected by SEM. Results PR% for GLU and TD were 30-50% 15 min and 1 m after their application. Post hoc tests indicated that PR% of CTR was significantly greater than those of GLU and TD at all time points tested. The PR% of GLU and TD were not significantly different. SEM examinations showed noncollapsed collagen meshes at the tubular entrances after GLU, and crystalline precipitates occluding the tubular orifices after TD, whereas CTR specimens showed typical patterns of etched dentin. Conclusions The present study on hydraulic conductance in dentin discs treated with two chemically different desensitizing agents and water as a control demonstrated that both products may be characterized as effective.


الموضوعات
Humans , Calcium Phosphates/chemistry , Glutaral/chemistry , Dentin/drug effects , Dentin Permeability/drug effects , Dentin Desensitizing Agents/chemistry , Methacrylates/chemistry , Surface Properties , Time Factors , Materials Testing , Water/chemistry , Microscopy, Electron, Scanning , Random Allocation , Edetic Acid/chemistry , Statistics, Nonparametric
3.
Braz. oral res. (Online) ; 30(1): e111, 2016. tab, graf
مقالة ي الانجليزية | LILACS | ID: biblio-951996

الملخص

Abstract The objective of this study was to evaluate the effects of diode laser and a desensitizing dentifrice on dentin permeability. Fifty-two root dentin fragments were obtained (5 × 5mm) and treated with 24% EDTA gel. The samples were divided into 4 groups (n = 13): G1, control (no treatment); G2, diode laser (λ = 908 nm, 1.5 W, continuous mode, 20s); G3, application of abrasive dentifrice for 1 minute (Elmex Sensitive Professional (International Gaba); and G4, application of abrasive dentifrice for 1 minute followed by irradiation with diode laser. Ten samples per group were immersed in 2% methylene blue solution for 4h. The specimens were washed, longitudinally sectioned, observed under optical microscopy, photographed and assessed based on the degree of dye leakage. The remaining samples were observed under scanning electron microscopy (SEM). The leakage data were subjected to ANOVA test, followed by Tukey's t-test (α = 5%). Groups 2, 3 and 4 showed less dye penetration than the control group (p < 0.05), but were similar among each other. SEM images showed that dentinal tubules were open in G1, and fused and occluded in G2. Group 3 showed dentinal tubules that were occluded by the metal ions from the toothpaste. G4 presented similar characteristics to G3, and the presence of fused dentin. The diode laser and the dentifrice were effective in reducing dentinal permeability, and the combination of the two treatments did not show better results than either one used alone.


الموضوعات
Animals , Cattle , Tooth Root/drug effects , Dentifrices/chemistry , Dentin/drug effects , Dentin Permeability/drug effects , Dentin Sensitivity/drug therapy , Dentin Desensitizing Agents/chemistry , Surface Properties/drug effects , Surface Properties/radiation effects , Time Factors , Tooth Root/radiation effects , Microscopy, Electron, Scanning , Random Allocation , Reproducibility of Results , Dentin/radiation effects , Dentin Permeability/radiation effects , Laser Therapy/methods , Lasers, Semiconductor/therapeutic use
4.
Braz. oral res. (Online) ; 29(1): 1-8, 2015. tab, ilus
مقالة ي الانجليزية | LILACS | ID: lil-777270

الملخص

This study aimed to identify factors that can affect the retention of glass fiber posts to intra-radicular dentin based on in vitro studies that compared the bond strength (BS) of GFPs cemented with resin cements. Searches were carried out in PubMed and Scopus until December 2013. Bond strength values and variables as type of tooth, presence of endodontic treatment, pretreatment of the post, type of bonding agent (if present), type of cement and mode of cement application were extracted from the 34 included studies. A linear regression model was used to evaluate the influence of these parameters on BS. The presence of endodontic treatment decreased the BS values in 22.7% considering the pooled data (p = 0.013). For regular cement, cleaning the post increased BS when compared to silane application without cleaning (p = 0.032), considering cleaning as ethanol, air abrasion, or phosphoric acid application. Applying the cement around the post and into root canal decreased the resistance compared to only around the post (p = 0.02) or only into root canal (p = 0.041), on the other hand, no difference was found for self-adhesive resin cement for the same comparisons (p = 0.858 and p = 0.067). Endodontic treatment, method of cement application, and post pretreatment are factors that might significantly affect the retention of glass-fiber posts into root canals mainly when cemented with regular resin cement. Self-adhesive resin cements were found to be less technique-sensitive to luting procedures as compared with regular resin cements.


الموضوعات
Animals , Cattle , Humans , Cementation/methods , Dental Prosthesis Retention/methods , Glass/chemistry , Post and Core Technique , Resin Cements/chemistry , Analysis of Variance , Dentin Desensitizing Agents/chemistry , Treatment Outcome
5.
Braz. oral res ; 27(3): 218-224, May-Jun/2013. tab, graf
مقالة ي الانجليزية | LILACS | ID: lil-673241

الملخص

This study evaluated the effect of a 2% chlorhexidine-based disinfectant (CHX) on the short-term resin-dentin bond strength of a self-etch adhesive system to human dentin with different mineral contents. Dentinal mineralization was tested at 4 levels (sound, and after 2, 4, or 8 days of demineralization-remineralization cycles) and disinfectant at 2 levels [deionized water (DW, negative control) and CHX]. Dentin demineralization induced by pH-cycling was characterized by cross-sectional hardness (CSH). Each dentin surface was divided into halves, one treated with DW and the other with CHX (5 minutes). Each surface was bonded with a self-etch adhesive system and restored. The specimens were sectioned and subjected to microtensile bond testing. CSH and microtensile bond strength (µTBS) data were analyzed by regression analysis and ANOVA-Tukey tests (α = 5%), respectively. The groups treated with CHX resulted in mean µTBS similar to those found for the groups in which the dentin was exposed to DW (p = 0.821). However, mean µTBS were strongly influenced by dentin mineralization (p < 0.05): the bond strength found for sound dentin was lower than that found for dentin cycled for 8 days, which was even lower than the bond strengths for dentin cycled for 2 or 4 days. The results suggest that the degree of dentin demineralization affects the bond strength of self-etching adhesives, but the use of CHX does not modify this effect.


الموضوعات
Humans , Chlorhexidine/pharmacology , Dental Bonding/methods , Dentin Desensitizing Agents/pharmacology , Dentin/drug effects , Analysis of Variance , Chlorhexidine/chemistry , Dentin Desensitizing Agents/chemistry , Hardness Tests , Materials Testing , Surface Properties , Time Factors , Tooth Demineralization , Tooth Fractures , Tensile Strength/drug effects
6.
Braz. oral res ; 27(2): 169-175, Mar-Apr/2013. tab, graf
مقالة ي الانجليزية | LILACS | ID: lil-668004

الملخص

The aim of this study was to evaluate the effects of different light-curing units and resin cement curing types on the bond durability of a feldspathic ceramic bonded to dentin. The crowns of 40 human molars were sectioned, exposing the dentin. Forty ceramic blocks of VITA VM7 were produced according to the manufacturer's recommendations. The ceramic surface was etched with 10% hydrofluoric acid / 60s and silanized. The dentin was treated with 37% phosphoric acid / 15s, and the adhesive was applied. The ceramic blocks were divided and cemented to dentin according to resin cement / RC curing type (dual- and photo-cured), light-curing unit (halogen light / QTH and LED), and storage conditions (dry and storage / 150 days + 12,000 cycles / thermocycling). All blocks were stored in distilled water (37°C / 24h) and sectioned (n = 10): G1 - QTH + RC Photo, G2 - QTH + RC Dual, G3 - LED + RC Photo, G4 - LED + RC Dual. Groups G5, G6, G7, and G8 were obtained exactly as G1 through G4, respectively, and then stored and thermocycled. Microtensile bond strength tests were performed (EMIC), and data were statistically analyzed by ANOVA and Tukey's test (5%). The bond strength values (MPa) were: G1 - 12.95 (6.40)ab; G2 - 12.02 (4.59)ab; G3 - 13.09 (5.62)ab; G4 - 15.96 (6.32)a; G5 - 6.22 (5.90)c; G6 - 9.48 (5.99)bc; G7 - 12.78 (11.30)ab; and G8 - 8.34 (5.98)bc. The same superscript letters indicate no significant differences. Different light-curing units affected the bond strength between ceramic cemented to dentin when the photo-cured cement was used, and only after aging (LED > QTH). There was no difference between the effects of dual- and photo-cured resin-luting agents on the microtensile bond strength of the cement used in this study.


الموضوعات
Humans , Curing Lights, Dental , Ceramics/chemistry , Dental Bonding/methods , Dentin Desensitizing Agents/chemistry , Dentin/drug effects , Resin Cements/chemistry , Analysis of Variance , Ceramics/radiation effects , Dental Restoration Failure , Dentin Desensitizing Agents/radiation effects , Dentin/chemistry , Materials Testing , Surface Properties , Tensile Strength , Time Factors , Water/chemistry
7.
J. appl. oral sci ; J. appl. oral sci;21(1): 68-73, 2013. ilus, tab
مقالة ي الانجليزية | LILACS, BBO | ID: lil-684998

الملخص

Objective: This study evaluated the effect of the margin location and an adhesive system on the marginal adaptation of composite restorations. Material and Methods: Class V cavities were prepared in bovine teeth with the gingival margin on the dentin and the incisal margin on the enamel. The cavities were restored with a micro-hybrid composite resin using an etch-and-rinse [Single Bond 2 (SB)] or a self-etching adhesive [Clearfil SE Bond (CL)]. After finishing and polishing the restorations, epoxy replicas were prepared. The marginal adaptation was analyzed using scanning electronic microscopy (SEM, 500 x magnification). The higher gap width in each margin was recorded (T0). After the first evaluation, the samples were submitted to thermal cycling (2,000 cycles of 5°C±2°C followed by 55°C±2°C – T1) and mechanical cycling (100,000 cycles of 50 kN and 2 Hz – T2). Replicas of samples were rebuilt after each cycling and analyzed under SEM. The data were submitted to Mann-Whitney, Wilcoxon and Friedman testing (á=0.05). Results: The SB presented higher gaps in the dentin than the enamel, while there was no difference between the substrate for the CL. In the dentin, the CL showed better marginal sealing than the SB. The opposite occurred in the enamel. There were no significant differences between the baseline, thermal and mechanical cycling for any experimental condition. Conclusions: The outcomes of the present study showed that the adhesive system and margin location have an important effect on the marginal adaptation of composite restorations.


الموضوعات
Humans , Cattle , Composite Resins/chemistry , Dental Marginal Adaptation , Dental Bonding/methods , Dental Enamel/drug effects , Dentin Desensitizing Agents/chemistry , Dentin/drug effects , Acid Etching, Dental , Bisphenol A-Glycidyl Methacrylate/chemistry , Dental Cavity Preparation , Dental Enamel/chemistry , Dentin/chemistry , Hot Temperature , Materials Testing , Microscopy, Electron, Scanning , Resin Cements/chemistry , Time Factors
8.
Braz. oral res ; 26(5): 418-423, Sept.-Oct. 2012. ilus, tab
مقالة ي الانجليزية | LILACS | ID: lil-649372

الملخص

We evaluated the effects of air-drying distance and bond surface area on the shear bond strength of a 2-step etch-and-rinse adhesive. A total of 120 bovine anterior teeth were equally divided into 6 main groups based on bonding surface area. The main groups were divided into sub-groups (n = 5) according to air-drying distance. The shear strength was determined using a universal testing machine at a crosshead speed of 0.5 mm/min. The averaged results were subjected to two-way ANOVA and Tukey's test (α = 0.05). Two-way ANOVA testing identified no significant cross-product interactions (p > 0.05), but the main factors of area (p < 0.0001) and air-drying distance (p < 0.00001) significantly affected the mean bond strength. Shorter air-drying distances improved bond strength, and increased surface area decreased the bond strength.


الموضوعات
Animals , Cattle , Dental Bonding/methods , Dentin Desensitizing Agents/chemistry , Dentin/chemistry , Shear Strength , Air , Acid Etching, Dental/methods , Composite Resins/chemistry , Materials Testing , Microscopy, Electron, Scanning , Surface Properties , Tensile Strength , Tooth Fractures
9.
Braz. oral res ; 25(5): 459-465, Sept.-Oct. 2011. ilus, tab
مقالة ي الانجليزية | LILACS | ID: lil-601886

الملخص

This study evaluated the effect of modified tetracycline on the resin-dentin bond strength (µTBS), silver nitrate uptake (SNU) and solution homogeneity (SH) of two adhesives. Dentin surfaces were treated with phosphoric acid, rinsed off and either rewetted with water (control group - CO), 2 percent minocycline (MI), 2 percent doxycyline (DO) or 2 percent chlorhexidine (CH). Adhesive systems (Adper Single Bond 2 and Prime Bond NT) and composite were applied and light-polymerized. Specimens were sectioned to obtain bonded sticks (0.8 mm²) to test under tension at 0.5 mm/min. For SNU, specimens were immersed in silver nitrate and analyzed by EDX-SEM. SH was qualitatively analyzed after mixing the adhesives with different solvent-based solutions containing MI, DO and CH. Lower µTBS values were observed in the DO group compared with MI and CH (p = 0.01). Lower SNU was observed for MI and CH. The lowest µTBS for both adhesives was observed for the DO group (p = 0.01). Signs of phase separation were observed for DO with both adhesives. MI or CH used as rewetting solutions after acid etching did not affect the µTBS and hybrid layer quality.


الموضوعات
Humans , Dental Bonding/methods , Dentin Desensitizing Agents/chemistry , Dentin/chemistry , Tetracyclines/pharmacology , Analysis of Variance , Anti-Infective Agents, Local/chemistry , Chlorhexidine/chemistry , Microscopy, Electron, Scanning , Metalloproteases/chemistry , Surface Properties , Silver Nitrate/chemistry , Tensile Strength , Time Factors
10.
J. appl. oral sci ; J. appl. oral sci;19(4): 318-323, July-Aug. 2011. ilus
مقالة ي الانجليزية | LILACS | ID: lil-599754

الملخص

OBJECTIVE: The aim of this study was to evaluate the capacity of potassium oxalate, fluoride gel and two kinds of propolis gel to reduce the hydraulic conductance of dentin, in vitro. MATERIAL AND METHODS: The methodology used for the measurement of hydraulic conductance of dentin in the present study was based on a model proposed in literature. Thirty-six 1-mm-thick dentin discs, obtained from extracted human third molars were divided into 4 groups (n=9). The groups corresponded to the following experimental materials: GI-10 percent propolis gel, pH 4.1; GII-30 percent propolis gel; GIII-3 percent potassium oxalate gel, pH 4,1; and GIV-1.23 percent fluoride gel, pH 4.1, applied to the dentin under the following surface conditions: after 37 percent phosphoric acid and before 6 percent citric acid application. The occluding capacity of the dentin tubules was evaluated using scanning electron microscopy (SEM) at ×500, ×1,000 and ×2,000 magnifications. Data were analyzed statistically by two-way ANOVA and Tukey's test at 5 percent significance level. RESULTS: Groups I, II, III, IV did not differ significantly from the others in any conditions by reducing in hydraulic conductance. The active agents reduced dentin permeability; however they produced the smallest reduction in hydraulic conductance when compared to the presence of smear layer (P<0.05). The effectiveness in reducing dentin permeability did not differ significantly from 10 percent or 30 percent propolis gels. SEM micrographs revealed that dentin tubules were partially occluded after treatment with propolis. CONCLUSIONS: Under the conditions of this study, the application of 10 percent and 30 percent propolis gels did not seem to reduce the hydraulic conductance of dentin in vitro, but it showed capacity of partially obliterating the dentin tubules. Propolis is used in the treatment of different oral problems without causing significant great collateral effects, and can be a good option in the treatment of patients with dentin sensitivity.


الموضوعات
Humans , Cariostatic Agents/pharmacology , Dentin Permeability/drug effects , Dentin/drug effects , Fluorides/pharmacology , In Vitro Techniques , Oxalates/pharmacology , Propolis/pharmacology , Analysis of Variance , Cariostatic Agents/chemistry , Dentin Desensitizing Agents/chemistry , Dentin/physiology , Dentin/ultrastructure , Fluorides/chemistry , Gels , Microscopy, Electron, Scanning , Oxalates/chemistry , Propolis/chemistry , Smear Layer , Surface Properties , Water/chemistry
11.
J. appl. oral sci ; J. appl. oral sci;19(2): 147-153, May-Apr. 2011. ilus
مقالة ي الانجليزية | LILACS | ID: lil-586035

الملخص

OBJECTIVES: To assess and to compare the effects of Gluma® Desensitizer (GDL) with an experimental glutaraldehyde and HEMA containing fumed silica dispersion (GDG) on dentin permeability using a chemiluminous tracer penetration test. MATERIAL AND METHODS: Twenty disc-shaped dentin specimens were dissected from extracted human third molars. The dentin specimens were mounted in a split chamber device for determination of permeability under liquid pressure using a photochemical method. Ten specimens were randomly selected and allocated to the evaluation groups Gluma® Desensitizer as aqueous solution and glutaraldehyde/HEMA as fumed silica dispersion, respectively. Dentin disc permeability was determined at two pressure levels after removal of smear with EDTA, after albumin soaking, and after application of the desensitizing agents. Two desensitizer-treated and rinsed specimens of each group were examined by scanning electron microscopy (SEM) for surface remnants. RESULTS: Comparatively large standard deviations of the mean EDTA reference and albumin soaked samples permeability values refected the differences of the dentin substrates. The mean chemiluminescence values of specimen treated with GDL and GDG, respectively, were signifcantly reduced after topical application of the desensitizing agents on albumin-soaked dentin. The effects of GDL and GDG on permeability were not signifcantly different. Treated specimens showed no surface remnants after rinsing. CONCLUSIONS: The experimental desensitizer gel formulation reduced dentin permeability as effectively as the original Gluma® Desensitizer solution.


الموضوعات
Humans , Dentin Desensitizing Agents/pharmacology , Dentin Permeability/drug effects , Dentin/drug effects , Glutaral/pharmacology , In Vitro Techniques , Methacrylates/pharmacology , Dentin Desensitizing Agents/chemistry , Dentin Sensitivity/drug therapy , Glutaral/chemistry , Luminescence , Materials Testing , Microscopy, Electron, Scanning , Methacrylates/chemistry , Random Allocation , Silicon Dioxide/chemistry , Surface Properties/drug effects
12.
مقالة ي الانجليزية | IMSEAR | ID: sea-139853

الملخص

Objective: A parallel design clinical study evaluated reduction in hypersensitivity after brushing for 12 weeks with Anchor toothpaste (containing potassium citrate, zinc citrate, triclosan and sodium monofluorophosphate) (test) and Colgate Total (sodium fluoride, silica, triclosan and copolymer) (control) dentifrices. Materials and Methods: Sixty adults with sensitivity to hot and cold stimulus in at least two tooth surfaces were stratified at the baseline examination by tactile, hot and cold stimuli scores in two balanced groups. Subjects were randomly allocated the test and control dentifrices and evaluated after 6 and 12 weeks of dentifrice use for hypersensitivity. Results: The two teeth that were selected in each patient were designated as two different sets. The 12 th -week scores as compared to baseline scores for tactile, heat and cold tests in the test group showed a reduction in tooth hypersensitivity by 36.67% (P < 0.01), 20.35% (P < 0.01) and 53.64 % (P < 0.01), respectively, in the first set of teeth and 43.75% (P < 0.01), 24.48% (P < 0.01) and 59.78% (P < 0.01), respectively, in the second set of teeth. The 12 th -week scores as compared to baseline scores for tactile, heat and cold tests in the control group showed a reduction in tooth hypersensitivity by 42.86% (P < 0.01), 13.02% (P < 0.01) and 45.14% (P < 0.01), respectively, in the first set of teeth and 40% (P < 0.01), 16.59% (P < 0.01) and 44.16% (P < 0.01), respectively, in the second set of teeth. Conclusions: Both the products reduced dentinal hypersensitivity in the study subjects at the end of the 12-week period. However, there was no statistically significant difference in reduction in hypersensitivity between the two products.


الموضوعات
Adolescent , Adult , Aged , Analysis of Variance , Cold Temperature/diagnosis , Dentifrices/chemistry , Dentifrices/therapeutic use , Dentin Desensitizing Agents/chemistry , Dentin Desensitizing Agents/therapeutic use , Dentin Sensitivity/drug therapy , Female , Hot Temperature/diagnosis , Humans , Male , Middle Aged , Pain Measurement , Prospective Studies , Single-Blind Method , Young Adult
13.
J. appl. oral sci ; J. appl. oral sci;17(5): 495-500, Sept.-Oct. 2009. ilus, graf, tab
مقالة ي الانجليزية | LILACS | ID: lil-531403

الملخص

OBJECTIVE: The objective of this study was to evaluate the effect of desensitizing agents containing different amounts of fluoride on the shear bond strength of a dual polymerized resin cement and a resin-modified glass ionomer cement (RMGIC) to dentin. MATERIAL AND METHODS: One hundred human molars were mounted in acrylic resin blocks and prepared until the dentin surface was exposed. The specimens were treated with one of four desensitizing agents: Bifluorid 12, Fluoridin, Thermoline and PrepEze. The remaining 20 specimens served as untreated controls. All groups were further divided into 2 subgroups in which a dual polymerized resin cement (Bifix QM) or a resin-modified glass ionomer cement (AVANTO) was used. The shear bond strength (MPa) was measured using a universal testing machine at a 0.5 mm/min crosshead speed. The data were analyzed statistically with a 2-way ANOVA, Tukey HSD test and regression analysis (α=0.05). The effect of the desensitizing agents on the dentin surface was examined by scanning electron microscopy. RESULTS: The fluoride-containing desensitizing agents affected the bond strength of the resin-based cements to dentin (p<0.001). PrepEze showed the highest bond strength values in all groups (p<0.001). CONCLUSION: Regression analysis showed a reverse relation between bond strength values of resin cements to dentin and the amount of fluoride in the desensitizing agent (p<0.05).


الموضوعات
Humans , Cariostatic Agents/chemistry , Dental Bonding , Dentin Desensitizing Agents/chemistry , Dentin-Bonding Agents/chemistry , Dentin/ultrastructure , Fluorides/chemistry , Resin Cements/chemistry , Adhesiveness , Calcium Fluoride/chemistry , Composite Resins/chemistry , Dental Stress Analysis/instrumentation , Fluorides, Topical/chemistry , Glass Ionomer Cements/chemistry , Materials Testing , Microscopy, Electron, Scanning , Shear Strength , Stress, Mechanical , Sodium Fluoride/chemistry , Temperature , Time Factors , Water/chemistry
اختيار الاستشهادات
تفاصيل البحث