Comportamiento orgánico en la utilización de barreras con polímeros impresos 3D para la regeneración ósea guiada en implantología / Organic behavior in the utilization of barriers with 3D printed polymers for guided bone regeneration in implantology

Este estudio aborda la viabilidad y los retos inherentes al uso de barreras de polímeros impresos en 3D para la regeneración ósea guiada (en adelante, ROG) en procedimientos de implantología dental. A través del análisis exhaustivo de investigaciones y aplicaciones clínicas actuales, se evalúa detalladamente la biocompatibilidad, la funcionalidad estructural y las respuestas biológicas inducidas por estas barreras innovadoras en entornos terapéuticos. Este enfoque permite una comprensión más profunda de las interacciones osteointegrativas y las perspectivas de adaptabilidad tisular asociadas con materiales poliméricos avanzados (AU)

This scholarly investigation delineates the efficacy and inherent challenges of utilizing 3D printed polymer barriers for guided bone regeneration (GBR) in dental implantology procedures. An extensive review of current research and clinical implementations provides a critical assessment of biocompatibility, structural functionality, and the biological responses elicited by these innovative barriers within therapeutic contexts. The study delves into the osteointegrative interactions and tissue adaptability prospects facilitated by advanced polymeric materials, offering significant insights into their clinical utility.(AU)

Mathematical-Physical description of the oxygen-inhibited layer (OIL) in nanofilled dental polymers / Descripción físico-matemática de la capa inhibida por oxígeno en polímeros dentales nano rellenados

Abstract This research evaluates the presence of the oxygen-inhibited layer (OIL) on the top surface of a photopolymerized dental composite resin protected with a glycerin layer. This evaluation was conducted using physical and mathematical methods. Polymerized discs were fabricated to evaluate Vickers microhardness (VHN), and pre-and post-polymerized samples were used for the calculation of C-O/C-H ratios through Fourier Transform Infrared Spectroscopy (FTIR) (n=10), using two types of glycerin, one for medical use (MG) and another for dental use (DG). Surface hardness decreased from MG to DG to CO, and the increase in C-O/C-H ratios decreased in the same order (p<0.05). Samples protected with medical and dental glycerin layers are harder and exhibit lower C-O/C-H bond ratios than the control group.

Resumen La presente investigación evalúa la presencia de la capa inhibida por oxígeno OIL en la última superficie fotocurada de una resina compuesta de uso odontológica que fue protegida con una capa de glicerina. Esta evaluación se hizo a partir de métodos físicos y matemáticos. Se fabricaron discos polimerizados para evaluar la microdureza Vickers (VHN) y pre y post polimerizados para el cálculo de tasas C-O/C-H por medio de Espectroscopía Infrarroja Transformada de Fourier (FTIR) (n=10) usando dos tipos de glicerina, una de uso médico (MG) y otra de uso dental (DG). La dureza superficial disminuyó de MG a DG a CO y el aumento de tasas C-O/C-H disminuyó en ese mismo orden (p<0,05). Las muestras protegidas con capas de glicerina médica y odontológica son más duras y presentan menos cantidad tasas de enlaces C-O/C-H que el grupo control.

Antitumor effects of redox-responsive nanoparticles containing platinum（Ⅳ）in ovarian cancer / 中华肿瘤杂志

Objectives: To explore the antitumor effects of redox-responsive nanoparticles containing platinum(Ⅳ)-NP@Pt(Ⅳ) in ovarian cancer. Methods: Redox-responsive polymer carriers were synthesized. Polymer carriers and platinum(Ⅳ)-Pt(Ⅳ) can self-assemble into NP@Pt(Ⅳ). Inductively coupled plasma mass spectrometry was performed to detect the platinum release from NP@Pt(Ⅳ) in reducing environment and the platinum content in ovarian cancer cells ES2 treated with cisplatin, Pt(Ⅳ) and NP@Pt(Ⅳ). The proliferation ability of the ovarian cancer cells were detected by 3-(4,5-Dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide (MTT) assay. Cellular apoptosis was assessed by flow cytometry. Collection of primary ovarian cancer tissues from patients with primary high-grade serous ovarian cancer who were surgically treated at the Cancer Hospital of the Chinese Academy of Medical Sciences from October to December 2022. The high-grade serous ovarian cancer patient-derived xenograft (PDX) mice were intravenously injected with Cy7.5 labeled NP@Pt(Ⅳ) followed by in vivo imaging system. Mice were treated with PBS, cisplatin and NP@Pt(Ⅳ). Tumor volume and weight were measured in each group. Necrosis, apoptosis and cell proliferation of tumor tissues were detected by hematoxylin-eosin (HE) staining, TUNEL fluorescence staining and Ki-67 immunohistochemistry staining. Body weight and HE staining of heart, liver, spleen, lung and kidney of mice in each group were measured. Results: The platinum release of NP@Pt(Ⅳ) after 48 hours in reducing environment was 76.29%, which was significantly higher than that of 26.82% in non-reducing environment (P<0.001). The platinum content in ES2 cells after 4 hours and 7 hours of treatment with NP@Pt(Ⅳ) (308.59, 553.15 ng/million cells) were significantly higher than those of Pt(Ⅳ) (100.21, 180.31 ng/million cells) and cisplatin (43.36, 50.36 ng/million cells, P＜0.05). The half inhibitory concentrations of NP@Pt(Ⅳ) in ovarian cancer cells ES2, A2780, A2780DDP were 1.39, 1.42 and 4.62 μmol/L, respectively, which were lower than those of Pt(IV) (2.89, 7.27, and 16.74 μmol/L) and cisplatin (5.21, 11.85, and 71.98 μmol/L). The apoptosis rate of ES2 cells treated with NP@Pt(Ⅳ) was (33.91±3.80)%, which was significantly higher than that of Pt(Ⅳ) [(16.28±2.41)%] and cisplatin [(15.01±1.17)%, P＜0.05]. In high-grade serous ovarian cancer PDX model, targeted accumulation of Cy7.5 labeled NP@Pt(Ⅳ) at tumor tissue could be observed. After the treatment, the tumor volume of mice in NP@Pt(IV) group was (130±98) mm3, which was significantly lower than those in control group [(1 349±161) mm3, P<0.001] and cisplatin group [(715±293) mm3, P=0.026]. The tumor weight of mice in NP@Pt(IV) group was (0.17±0.09)g, which was significantly lower than those in control group [(1.55±0.11)g, P<0.001] and cisplatin group [(0.82±0.38)g, P=0.029]. The areas of tumor necrosis and apoptosis in mice treated with NP@Pt(Ⅳ) were higher than those in mice treated with cisplatin. Immunohistochemical staining revealed that there were low expressions of Ki-67 at tumor tissues of mice treated with NP@Pt(Ⅳ) compared with cisplatin. The change in body weight of mice in NP@Pt(Ⅳ) group was not significantly different from that of the control group [(18.56±2.04)g vs.(20.87±0.79)g, P=0.063]. Moreover, the major organs of the heart, liver, spleen, lung, and kidney were also normal by HE staining. Conclusion: Redox-responsive NP@Pt(Ⅳ), produced in this study can enhance the accumulation of cisplatin in ovarian cancer cells and improve the efficacy of ovarian cancer chemotherapy.

Antitumor effects of redox-responsive nanoparticles containing platinum（Ⅳ）in ovarian cancer / 中华肿瘤杂志

Objectives: To explore the antitumor effects of redox-responsive nanoparticles containing platinum(Ⅳ)-NP@Pt(Ⅳ) in ovarian cancer. Methods: Redox-responsive polymer carriers were synthesized. Polymer carriers and platinum(Ⅳ)-Pt(Ⅳ) can self-assemble into NP@Pt(Ⅳ). Inductively coupled plasma mass spectrometry was performed to detect the platinum release from NP@Pt(Ⅳ) in reducing environment and the platinum content in ovarian cancer cells ES2 treated with cisplatin, Pt(Ⅳ) and NP@Pt(Ⅳ). The proliferation ability of the ovarian cancer cells were detected by 3-(4,5-Dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide (MTT) assay. Cellular apoptosis was assessed by flow cytometry. Collection of primary ovarian cancer tissues from patients with primary high-grade serous ovarian cancer who were surgically treated at the Cancer Hospital of the Chinese Academy of Medical Sciences from October to December 2022. The high-grade serous ovarian cancer patient-derived xenograft (PDX) mice were intravenously injected with Cy7.5 labeled NP@Pt(Ⅳ) followed by in vivo imaging system. Mice were treated with PBS, cisplatin and NP@Pt(Ⅳ). Tumor volume and weight were measured in each group. Necrosis, apoptosis and cell proliferation of tumor tissues were detected by hematoxylin-eosin (HE) staining, TUNEL fluorescence staining and Ki-67 immunohistochemistry staining. Body weight and HE staining of heart, liver, spleen, lung and kidney of mice in each group were measured. Results: The platinum release of NP@Pt(Ⅳ) after 48 hours in reducing environment was 76.29%, which was significantly higher than that of 26.82% in non-reducing environment (P<0.001). The platinum content in ES2 cells after 4 hours and 7 hours of treatment with NP@Pt(Ⅳ) (308.59, 553.15 ng/million cells) were significantly higher than those of Pt(Ⅳ) (100.21, 180.31 ng/million cells) and cisplatin (43.36, 50.36 ng/million cells, P＜0.05). The half inhibitory concentrations of NP@Pt(Ⅳ) in ovarian cancer cells ES2, A2780, A2780DDP were 1.39, 1.42 and 4.62 μmol/L, respectively, which were lower than those of Pt(IV) (2.89, 7.27, and 16.74 μmol/L) and cisplatin (5.21, 11.85, and 71.98 μmol/L). The apoptosis rate of ES2 cells treated with NP@Pt(Ⅳ) was (33.91±3.80)%, which was significantly higher than that of Pt(Ⅳ) [(16.28±2.41)%] and cisplatin [(15.01±1.17)%, P＜0.05]. In high-grade serous ovarian cancer PDX model, targeted accumulation of Cy7.5 labeled NP@Pt(Ⅳ) at tumor tissue could be observed. After the treatment, the tumor volume of mice in NP@Pt(IV) group was (130±98) mm3, which was significantly lower than those in control group [(1 349±161) mm3, P<0.001] and cisplatin group [(715±293) mm3, P=0.026]. The tumor weight of mice in NP@Pt(IV) group was (0.17±0.09)g, which was significantly lower than those in control group [(1.55±0.11)g, P<0.001] and cisplatin group [(0.82±0.38)g, P=0.029]. The areas of tumor necrosis and apoptosis in mice treated with NP@Pt(Ⅳ) were higher than those in mice treated with cisplatin. Immunohistochemical staining revealed that there were low expressions of Ki-67 at tumor tissues of mice treated with NP@Pt(Ⅳ) compared with cisplatin. The change in body weight of mice in NP@Pt(Ⅳ) group was not significantly different from that of the control group [(18.56±2.04)g vs.(20.87±0.79)g, P=0.063]. Moreover, the major organs of the heart, liver, spleen, lung, and kidney were also normal by HE staining. Conclusion: Redox-responsive NP@Pt(Ⅳ), produced in this study can enhance the accumulation of cisplatin in ovarian cancer cells and improve the efficacy of ovarian cancer chemotherapy.

The effect of aging on the accuracy of marginal adaptation and fracture resistance of CAD/CAM PEEK single crown restoration

Aim: In recent years, great advances have been made in the use of CAD/CAM to prepare fixed restorations. The marginal and internal fit of these restorations is a principal determinant for their clinical success. In addition, the nature of the oral environment affects the mechanical properties of these restorations. Therefore, this study aimed to investigate the effect of aging process under conditions that simulate the oral environment on the marginal adaptation, and, fracture resistance of crowns fabricated from polyether ether ketone (PEEK) using CAD/CAM methods. Methods: Twenty identical crown restorations were fabricated by using CAD/CAM methods to mill polyether ether ketone (PEEK) material. These crowns were produced by using a software design of an epoxy resin replica of the prepared maxillary first premolar tooth. All PEEK crowns were cemented and randomly divided into two equal groups (A, B). Each group was divided into subgroups (A1, A2 and B1, B2). Group A1 and A2 were used to measure marginal adaptation and fracture resistance, respectively, before aging, while group (B1 and B2) were measured after aging. The cemented crowns were mounted in resin molds to facilitate the sectioning process. The measurements of the marginal gap were performed after sectioning at four points using a stereomicroscope. The fracture resistance of the crowns was investigated using a universal testing machine. A statistical analysis was performed using the GraphPad Prism® software version and unpaired Student's t-test. Results: The results revealed that aging affected the marginal gap, and the fracture resistance of the PEEK crowns. While aging, negatively affected the conditions under investigation, however the least significant difference of marginal gap was found in the margin region. Conclusions: PEEK-CAD/CAM is considered as a good alternative prosthodontic material for fixed prostheses. The CAD/CAM technique used to make PEEK crown restorations in our study offers the advantages of high marginal accuracy and fracture resistance for long-term performance in the oral environment

Estudio de biocompatibilidad de matrices poliméricas combinadas, responsivas al pH, con aplicación en Ingeniería de Tejido Óseo / Biocompatibility study of combined pH-responsive polymeric matrices with application in Bone Tissue Engineering

El presente trabajo muestra la obtención de un material a partir de un polímero sintético (TerP) y otro natural, mediante entrecruzamiento físico y su caracterización fisicoquímica y biológica, con el fin de emplearlos para regeneración de tejido óseo. Las membranas fueron obtenidas por la técnica de evaporación del solvente y caracterizadas por espectroscopia FTIR, ensayos de hinchamiento, medidas de ángulo de contacto y microscopia electrónica de barrido (SEM). Se encontró que la compatibilidad entre los polímeros que la constituyen es estable a pH fisiológico y que, al incorporar mayor cantidad del TerP a la matriz, esta se vuelve más hidrofóbica y porosa. Además, teniendo en cuenta la aplicación prevista para dichos materiales, se realizaron estudios de biocompatibilidad y citotoxicidad con células progenitoras de médula ósea (CPMO) y células RAW264.7, respectivamente. Se evaluó la proliferación celular, la producción y liberación de óxido nítrico (NO) al medio de cultivo durante 24 y 48 horas y la expresión de citoquinas proinflamatorias IL-1ß y TNF-α de las células crecidas sobre los biomateriales variando la cantidad del polímero sintético. Se encontró mayor proliferación celular y menor producción de NO sobre las matrices que contienen menos proporción del TerP, además de poseer una mejor biocompatibilidad. Los resultados de este estudio muestran que el terpolímero obtenido y su combinación con un polímero natural es una estrategia muy interesante para obtener un biomaterial con posibles aplicaciones en medicina regenerativa y que podría extenderse a otros sistemas estructuralmente relacionados. (AU)

In the present work, the preparation of a biomaterial from a synthetic terpolymer (TerP) and a natural polymer, physically crosslinked, is shown. In order to evaluate the new material for bone tissue regeneration, physicochemical and biological characterizations were performed. The membranes were obtained by solvent casting and characterized using FTIR spectroscopy, swelling tests, contact angle measurements, and scanning electron microscopy (SEM). It was found that the compatibility between the polymers is stable at physiological pH and the incorporation of a higher amount of TerP into the matrix increases hydrophobicity and porosity.Furthermore, considering the intended application of these materials, studies of biocompatibility and cytotoxicity were conducted with Bone Marrow Progenitor Cells (BMPCs) and RAW264.7 cells, respectively. Cell proliferation, NO production and release into the culture medium for 24 and 48 hours, and proinflammatory cytokine expression of IL-1ß and TNF-α from cells grown on the biomaterials while varying the amount of the synthetic polymer were evaluated. Greater cell proliferation and lower NO production were found on matrices containing a lower proportion of TerP, in addition to better biocompatibility. The results of this study demonstrate that the obtained terpolymer and its combination with a natural polymer is a highly interesting strategy for biomaterial preparation with potential applications in regenerative medicine. This approach could be extended to other structurally related systems. (AU)

Biodegradation of polyethylene terephthalate: a review / 生物工程学报

Plastics are widely used in human daily life, which bring great convenience. Nevertheless, the disposal of a large amount of plastic wastes also brings great pressure to the environment. Polyethylene terephthalate (PET) is a polymer thermoplastic material produced from petroleum. It has become one of the most commonly used plastics in the world due to its durability, high transparency, light weight and other characteristics. PET can exist in nature for a long time due to its complex structure and the difficulty in degradation, which causes serious pollution to the global ecological environment, and threatens human health. The degradation of PET wastes has since become one of the global challenges. Compared with physical and chemical methods, biodegradation is the greenest way for treating PET wastes. This review summarizes the recent advances on PET biodegradation including microbial and enzymatic degradation of PET, biodegradation pathway, biodegradation mechanisms, and molecular modification of PET-degrading enzymes. In addition, the prospect for achieveing efficient degradation of PET, searching and improving microorganisms or enzymes that can degrade PET of high crystallinity are presented, with the aimto facilitate the development, application and molecular modification of PET biodegradation microorganisms or enzymes.

A novel biodegradable polymer-coated sirolimus-eluting stent: 1-year results of the HELIOS registry / 中华医学杂志(英文版)

BACKGROUND@#The HELIOS stent is a sirolimus-eluting stent with a biodegradable polymer and titanium oxide film as the tie-layer. The study aimed to evaluate the safety and efficacy of HELIOS stent in a real-world setting.@*METHODS@#The HELIOS registry is a prospective, multicenter, cohort study conducted at 38 centers across China between November 2018 and December 2019. A total of 3060 consecutive patients were enrolled after application of minimal inclusion and exclusion criteria. The primary endpoint was target lesion failure (TLF), defined as a composite of cardiac death, non-fatal target vessel myocardial infarction (MI), and clinically indicated target lesion revascularization (TLR) at 1-year follow-up. Kaplan-Meier methods were used to estimate the cumulative incidence of clinical events and construct survival curves.@*RESULTS@#A total of 2998 (98.0%) patients completed the 1-year follow-up. The 1-year incidence of TLF was 3.10% (94/2998, 95% closed interval: 2.54-3.78%). The rates of cardiac death, non-fatal target vessel MI and clinically indicated TLR were 2.33% (70/2998), 0.20% (6/2998), and 0.70% (21/2998), respectively. The rate of stent thrombosis was 0.33% (10/2998). Age ≥60 years, diabetes mellitus, family history of coronary artery disease, acute myocardial infarction at admission, and device success were independent predictors of TLF at 1 year.@*CONCLUSION@#The 1-year incidence rates of TLF and stent thrombosis were 3.10% and 0.33%, respectively, in patients treated with HELIOS stents. Our results provide clinical evidence for interventional cardiologists and policymakers to evaluate HELIOS stent.@*CLINICAL TRIAL REGISTRATION@#ClinicalTrials.gov, NCT03916432.

Effect of polymer nanoparticles on atherosclerotic lesions and the associated mechanisms: a review / 生物工程学报

Polymer nanoparticles generally refer to hydrophobic polymers-based nanoparticles, which have been extensively studied in the nanomedicine field due to their good biocompatibility, efficient long-circulation characteristics, and superior metabolic discharge patterns over other nanoparticles. Existing studies have proved that polymer nanoparticles possess unique advantages in the diagnosis and treatment of cardiovascular diseases, and have been transformed from basic researches to clinical applications, especially in the diagnosis and treatment of atherosclerosis (AS). However, the inflammatory reaction induced by polymer nanoparticles would induce the formation of foam cells and autophagy of macrophages. In addition, the variations in the mechanical microenvironment of cardiovascular diseases may cause the enrichment of polymer nanoparticles. These could possibly promote the occurrence and development of AS. Herein, this review summarized the recent application of polymer nanoparticles in the diagnosis and treatment of AS, as well as the relationship between polymer nanoparticles and AS and the associated mechanism, with the aim to facilitate the development of novel nanodrugs for the treatment of AS.

Commentary: polymer binding modules accelerate enzymatic degradation of poly(ethylene terephthalate) / 生物工程学报

The large scale production and indiscriminate use of plastics led to serious environmental pollution. To reduce the negative effects of plastics waste on the environment, an approach of enzymatic degradation was put forward to catalyze plastics degradation. Protein engineering strategies have been applied to improve the plastics degrading enzyme properties such as activity and thermal stability. In addition, polymer binding modules were found to accelerate the enzymatic degradation of plastics. In this article, we introduced a recent work published in Chem Catalysis, which studied the role of binding modules in enzymatic hydrolysis of poly(ethylene terephthalate) (PET) at high-solids loadings. Graham et al. found that binding modules accelerated PET enzymatic degradation at low PET loading (< 10 wt%) and the enhanced degradation cannot be observed at high PET loading (10 wt%-20 wt%). This work is beneficial for the industrial application of polymer binding modules in plastics degradation.

Advances in biodegradation of polyolefin plastics / 生物工程学报

Polyolefin plastics are a group of polymers with C-C backbone that have been widely used in various areas of daily life. Due to their stable chemical properties and poor biodegradability, polyolefin plastic waste continues to accumulate worldwide, causing serious environmental pollution and ecological crises. In recent years, biological degradation of polyolefin plastics has attracted considerable attention. The abundant microbial resources in the nature offer the possibility of biodegradation of polyolefin plastic waste, and microorganisms capable of degrading polyolefin have been reported. This review summarizes the research progress on the biodegradation microbial resources and the biodegradation mechanisms of polyolefin plastics, presents the current challenges in the biodegradation of polyolefin plastics, and provides an outlook on future research directions.

Recent progress in the biosynthesis of dicarboxylic acids, a monomer of biodegradable plastics / 生物工程学报

Plastics are one of the most important polymers with huge global demand. However, the downsides of this polymer are that it is difficult to degrade, which causes huge pollution. The environmental-friendly bio-degradable plastics therefore could be an alternative and eventually fulfill the ever-growing demand from every aspect of the society. One of the building blocks of bio-degradable plastics is dicarboxylic acids, which have excellent biodegradability and numerous industrial applications. More importantly, dicarboxylic acid can be biologically synthesized. Herein, this review discusses the recent advance on the biosynthesis routes and metabolic engineering strategies of some of the typical dicarboxylic acids, in hope that it will help to provide inspiration to further efforts on the biosynthesis of dicarboxylic acids.

Effects of Platycodonis Radix-Curcumae Rhizoma on oral nanoparticle uptake and in vitro inhibition against breast cancer metastasis / 中国中药杂志

This study combined the herbal pair Platycodonis Radix-Curcumae Rhizoma(PR-CR) possessing an inhibitory effect on tumor cell proliferation and metastasis with the active component of traditional Chinese medicine(TCM) silibinin-loaded nanoparticles(NPs) with a regulatory effect on tumor microenvironment based on the joint effect on tumor cells and tumor microenvironment to inhi-bit cell metastasis. The effects of PR-CR on the cellular uptake of NPs and in vitro inhibition against breast cancer proliferation and metastasis were investigated to provide an experimental basis for improving nanoparticle absorption and enhancing therapeutic effects. Silibinin-loaded lipid-polymer nanoparticles(LPNs) were prepared by the nanoprecipitation method and characterized by transmission electron microscopy. The NPs were spherical or quasi-spherical in shape with obvious core-shell structure. The mean particle size was 107.4 nm, Zeta potential was-27.53 mV. The cellular uptake assay was performed by in vitro Caco-2/E12 coculture cell model and confocal laser scanning microscopy(CLSM), and the results indicated that PR-CR could promote the uptake of NPs. Further, in situ intestinal absorption assay by the CLSM vertical scanning approach showed that PR-CR could promote the absorption of NPs in the enterocytes of mice. The inhibitory effect of NPs on the proliferation and migration of 4T1 cells was analyzed using 4T1 breast cancer cells and co-cultured 4T1/WML2 cells, respectively. The results of the CCK8 assay showed that PR-CR-containing NPs could enhance the inhibition against the proliferation of 4T1 breast cancer cells. The wound healing assay indicated that PR-CR-containing NPs enhanced the inhibition against the migration of 4T1 breast cancer cells. This study enriches the research on oral absorption of TCM NPs and also provides a new idea for utilizing the advantages of TCM to inhibit breast cancer metastasis.

Five-year outcomes of biodegradable versus second-generation durable polymer drug-eluting stents used in complex percutaneous coronary intervention / 中华医学杂志(英文版)

BACKGROUND@#There are few data comparing clinical outcomes of complex percutaneous coronary intervention (CPCI) when using biodegradable polymer drug-eluting stents (BP-DES) or second-generation durable polymer drug-eluting stents (DP-DES). The purpose of this study was to investigate the safety and efficacy of BP-DES and compare that with DP-DES in patients with and without CPCI during a 5-year follow-up.@*METHODS@#Patients who exclusively underwent BP-DES or DP-DES implantation in 2013 at Fuwai Hospital were consecutively enrolled and stratified into two categories based on CPCI presence or absence. CPCI included at least one of the following features: unprotected left main lesion, ≥2 lesions treated, ≥2 stents implanted, total stent length >40 mm, moderate-to-severe calcified lesion, chronic total occlusion, or bifurcated target lesion. The primary endpoint was major adverse cardiac events (MACE) including all-cause death, recurrent myocardial infarction, and total coronary revascularization (target lesion revascularization, target vessel revascularization [TVR], and non-TVR) during the 5-year follow-up. The secondary endpoint was total coronary revascularization.@*RESULTS@#Among the 7712 patients included, 4882 (63.3%) underwent CPCI. Compared with non-CPCI patients, CPCI patients had higher 2- and 5-year incidences of MACE and total coronary revascularization. Following multivariable adjustment including stent type, CPCI was an independent predictor of MACE (adjusted hazard ratio [aHR]: 1.151; 95% confidence interval [CI]: 1.017-1.303, P  = 0.026) and total coronary revascularization (aHR: 1.199; 95% CI: 1.037-1.388, P  = 0.014) at 5 years. The results were consistent at the 2-year endpoints. In patients with CPCI, BP-DES use was associated with significantly higher MACE rates at 5 years (aHR: 1.256; 95% CI: 1.078-1.462, P  = 0.003) and total coronary revascularization (aHR: 1.257; 95% CI: 1.052-1.502, P  = 0.012) compared with that of DP-DES, but there was a similar risk at 2 years. However, BP-DES had comparable safety and efficacy profiles including MACE and total coronary revascularization compared with DP-DES in patients with non-CPCI at 2 and 5 years.@*CONCLUSIONS@#Patients underwent CPCI remained at a higher risk of mid- to long-term adverse events regardless of the stent type. The effect of BP-DES compared with DP-DES on outcomes was similar in CPCI and non-CPCI patients at 2 years but had inconsistent effects at the 5-year clinical endpoints.

Interaction between microplastics and microorganisms in soil environment: a review / 生物工程学报

As a widespread pollutant in the environment, research on microplastics have attracted much attention. This review systematically analyzed the interaction between microplastics and soil microorganisms based on existing literatures. Microplastics can change the structure and diversity of soil microbial communities directly or indirectly. The magnitude of these effects depends on the type, dose and shape of microplastics. Meanwhile, soil microorganisms can adapt to the changes caused by microplastics through forming surface biofilm and selecting population. This review also summarized the biodegradation mechanism of microplastics, and explored the factors affecting this process. Microorganisms will firstly colonize the surface of microplastics, and then secrete a variety of extracellular enzymes to function at specific sites, converting polymers into lower polymers or monomers. Finally, the depolymerized small molecules enter the cell for further catabolism. The factors affecting this degradation process are not only the physical and chemical properties of the microplastics, such as molecular weight, density and crystallinity, but also some biological and abiotic factors that affect the growth and metabolism of related microorganisms and the enzymatic activities. Future studies should focus on the connection with the actual environment, and develop new technologies of microplastics biodegradation to solve the problem of microplastic pollution.

Research Advances in Medical Materials and Products for Soft Tissue Repairs / 中国医疗器械杂志

Soft tissue is an indispensable tissue in human body. It plays an important role in protecting the body from external physical, chemical or biological factors. Mild soft tissue injuries can self-heal, while severe soft tissue injuries may require related treatment. Natural polymers (such as chitosan, hyaluronic acid, and collagen) and synthetic polymers (such as polyethylene glycol and polylactic acid) exhibit good biocompatibility, biodegradability and low toxicity. It can be used for soft tissue repairs for antibacterial, hemostatic and wound healing purposes. Their related properties can be enhanced through modification or preparation of composite materials. Commonly used soft tissue repairs include wound dressings, biological patches, medical tissue adhesives, and tissue engineering scaffolds. This study introduces the properties, mechanisms of action and applications of various soft tissue repair medical materials, including chitosan, hyaluronic acid, collagen, polyethylene glycol and polylactic acid, and provides an outlook on the application prospects of soft tissue repair medical materials and products.

Avaliação e elucidação do mecanismo de ação de polímeros naturais modificados utilizados na agricultura / Evaluation and mode of action elucidation for modified natural polymers used in agriculture

Atualmente a agricultura ocupa um papel de extrema importância na conjuntura global e nacional e está inserida em um contexto de enormes desafios devido ao aumento da população mundial e maior demanda por alimentos. Ao mesmo tempo, é o setor mais afetado pelos impactos negativos das mudanças climáticas, que têm espalhado suas consequências de maneira cada vez mais frequente e intensa. Um dos principais efeitos é a alteração do regime de chuvas ao redor do globo, ocasionando estiagens intensas e duradouras, capazes de reduzir a produtividade de safras e comprometer a produção alimentícia. As abordagens atualmente existentes no mercado para mitigar as consequências negativas da escassez hídrica demandam alto investimento de implementação e manutenção, ou possuem um perfil ecotoxicológico insatisfatório. Polímeros de origem natural modificados quimicamente foram avaliados em termos de desempenho e capacidade de prover às plantas uma maior disponibilidade de água através de retenção hídrica. Os resultados alcançados demonstraram que os polímeros modificados com grupos iônicos foram capazes de promover um melhor gerenciamento hídrico no microambiente ao redor de sementes e entregar ganhos de produtividade a lavouras de soja. O mecanismo de ação da tecnologia estudada foi elucidado através de ensaios de determinação de capacidade de campo, análise de elipsometria, microscopia de força atômica, ensaios de germinação de soja sob estresse hídrico e implementação de áreas de soja a céu aberto a partir da aplicação em tratamento de sementes e sulco de plantio. As interações intra e intermoleculares entre as partículas de solo, moléculas de polímero e de água se mostraram ponto chave para a mudança de patamar de desempenho de polímeros naturais modificados utilizados na agricultura, quando comparados com os grupos controle. A tecnologia aqui estudada é, portanto, recomendada para utilização na agricultura, com capacidade de potencializar o efeito de tecnologias dependentes de água, resultando em maior produtividade na colheita

Nowadays agriculture occupies an extremely important role both in the global and national scenarios. Its included in a very challenging context due to the forecast of increased world population and consequent higher demand for food. At the same time, it is the most affected economic sector by the climate change effects, which have been causing frequent and harsh impacts. One of the main effects is the change in the rainfall pattern worldwide, which causes severe and long-lasting droughts, responsible for causing crops to fail and therefore putting food production at risk. The current available mitigation measures to address hydric scarcity require a huge investment for implementation and maintenance or do not present a satisfactory and safe ecotoxicological profile. Chemically modified natural polymers have been evaluated in terms of performance and ability to provide the plants with higher water availability through hydric retention. The results obtained show that such ionic group modified polymers are able to promote better water management in a given microenvironment surrounding the seeds and ultimately delivery a higher yield to soy crops. The technology's mode of action has been elucidated through field capacity determination trials, ellipsometry, atomic force microscopy, soy germination trials under hydric stress and, finally, implementation of soy areas under actual field conditions by applying the polymers via seed treatment and in-furrow methods. Both intra- and intermolecular interaction between soil particles, polymer and water molecules have been proven as key to understanding the agricultural performance improvement of the modified polymers when compared to the control. The technology is recommended for agricultural applications due to its ability to boost the effect of water-dependent technologies, promoting higher yields

Efficiency analysis of commercial polymeric membranes for bone regeneration in rat cranial defects

Purpose: To evaluate the in vivo efficiency of commercial polymeric membranes for guided bone regeneration. Methods: Rat calvarial critical size defects was treated with LuminaCoat (LC), Surgitime PTFE (SP), GenDerm (GD), Pratix (PR), Techgraft (TG) or control (C-) and histomorphometric analysis determined the percentage of new bone, connective tissue and biomaterial at 1 or 3 months. Statistical analysis used ANOVA with Tukey's post-test for means at same experimental time and the paired Student's t test between the two periods, considering p < 0.05. Results: New bone at 1 month was higher for SP, TG and C-, at 3 months there were no differences, and between 1 and 3 months PR had greater increase growthing. Connective tissue at 1 month was higher for C-, at 3 months for PR, TG and C-, and between 1 and 3 months C- had sharp decline. Biomaterial at 1 month was higher for LC, in 3 months for SP and TG, and between 1 and 3 months, LC, GD and TG had more decreasing mean. Conclusion: SP had greater osteopromotive capacity and limitation of connective ingrowth, but did not exhibit degradation. PR and TG had favorable osteopromotion, LC less connective tissue and GD more accelerated biodegradation.

Development of metformin HCl granules using brown flaxseed mucilage as a retardant polymer: effects of polymer and drug ratio

Abstract Flaxseed (Linum usitatissimum L.) is the seed of a multipurpose plant of pharmaceutical interest, as its mucilage can be used as a natural matrix to develop extended-release dosage forms and potentially replace synthetic polymers. In this study, a 3² factorial design with two replicates of the central point was applied to optimize the development of extended-release granules of metformin HCl. The total fiber content of the mucilage as well as the friability and dissolution of the formulations were evaluated. The lyophilized mucilage presented a high total fiber content (42.63%), which suggests a high efficiency extraction process. Higher concentrations of the mucilage and metformin HCl yielded less friable granules. In addition, lower concentrations of metformin HCl and higher concentrations of the mucilage resulted in slower drug release during the dissolution assays. The release kinetics for most formulations were better represented by the Hixson-Crowell model, while formulations containing a higher concentration of the mucilage were represented by the Korsmeyer-Peppas model. Nonetheless, five formulations showed a longer release than the reference HPMC formulation. More desirable results were obtained with a higher concentration of the mucilage (13-18%) and a lower concentration of metformin (40%).

Interplay between resin cements and surface-treated Poly-Ether-Ether-Ketone (PEEK): effect of aging

Aim: This study assessed the effect of thermal aging on the interfacial strength of resin cements to surface-treated PEEK. Methods: Ninety-six PEEK blocks were allocated into 4 groups (n=24), according to following surface treatments: SB - sandblasting with aluminum oxide; SA - acid etched with 98% sulfuric acid; CA ­ coupling agent (Visio.link, Bredent) and CO - control group (untreated). Surface roughness (Ra) was measured and one cylinder (1-mm diameter and height) of Rely-X Ultimate - ULT (3M/ESPE) and another one of Panavia V5 - PAN (Kuraray) were constructed on the treated or untreated PEEK surfaces. Half of the samples of each group were thermal aged (1,000 cycles). Samples were tested at a crosshead speed of 1 mm/min in shear mode (µSBS). Ra and µSBS data were compared using one- and three-way ANOVA, respectively, and Tukey's tests. Results: SA and SB samples had the roughest surfaces, while CA the smoother (p<0.001). Thermal aging reduced µSBS regardless the surface treatment and resin cement used. There was interaction between surface treatment and resin cement (p <0.001), with ULT showing higher µSBS values than PAN. SA provided higher µSBS than SB for both resin cements, while for CA µSBS was higher (PAN) or lower than SB (ULT). Conclusion: Aging inadvertently reduces interfacial strength between PEEK and the resin cements. If ULT is the resin cement of choice, reliable interfacial strength is reached after any PEEK surface treatment. However, if PAN is going to be used only SA and CA are recommended as PEEK treatment