ABSTRACT
Abstract Spinal surgery continues to expand its horizons to care for disabled patients presenting pain and deformities. Over the past decade, our knowledge of spinal alignment, from the skull to the pelvis, has increased considerably. Such knowledge must expand to reach general orthopedists and improve the care required for so many people. Global spinal alignment is a critical concept in understanding the impact of pathological conditions (degenerative diseases, traumas, deformities) and their treatment, including spinal instrumentation and arthrodesis. Therefore, the treatment of any spinal disease must include the knowledge of the complexity of the spinopelvic alignment. At first, all parameters seem like pure mathematics, hardly applicable to the everyday life of the inattentive reader. However, it gradually becomes clear that, like everything else in orthopedics, biomechanics is an essential part of the knowledge of the musculoskeletal system, revealing the logic behind the physiology of movements. The knowledge of the sagittal alignment concepts and spinopelvic parameteres provide a better comprehension of the axial and appendicular skeletons, increasing the understanding of the physiological and adaptive spinal processes in the face of the degenerative process that increases throughout life.
Resumo A cirurgia da coluna continua a expandir seus horizontes para cuidar dos pacientes incapacitados com dor e deformidades. Desde a última década, nosso conhecimento sobre o alinhamento espinal, do crânio à pelve, aumentou consideravelmente. Portanto, faz-se necessária a expansão de tal conhecimento para o ortopedista geral, para que possamos proporcionar melhores cuidados para essa população. O alinhamento espinal global é um conceito crítico no entendimento do impacto ocasionado pela condição patológica (doença degenerativa, trauma, deformidade) e mesmo do seu tratamento, como na instrumentação e artrodese da coluna. O tratamento de qualquer doença na coluna deve incluir o entendimento da complexidade do alinhamento espinopélvico. A princípio, todos os parâmetros parecem puramente matemáticos e pouco aplicáveis à realidade do leitor mais desatento. Mas, aos poucos, fica claro que, como tudo em ortopedia, a biomecânica faz parte essencial do conhecimento do sistema musculoesquelético, tornando mais claras as lógicas da fisiologia do movimento. O conhecimento dos conceitos de alinhamento sagital e dos parâmetros espinopélvicos proporcionam uma melhor compreensão dos esqueletos axial e apendicular, além de um melhor entendimento dos processos fisiológicos e adaptativos da coluna frente ao processo degenerativo crescente que ocorre ao longo da vida.
Subject(s)
Humans , Spinal Fusion , Spine/surgeryABSTRACT
Objetivo: Realizar una descripción anatómica de las estructuras involucradas en el abordaje para la técnica de abordaje lateral (fusión intersomática lateral extrema) basada en imágenes de resonancia magnética en decúbito dorsal. Materiales y Métodos: Se llevó a cabo un estudio observacional, descriptivo, retrospectivo, de 200 pacientes evaluados con resonancia magnética de columna lumbosacra. Se tomaron mediciones en cortes axiales para determinar el posicionamiento de la vena cava, la arteria aorta, y el ancho y la altura del músculo psoas a fin de delimitar zonas de seguridad y de riesgo. Resultados: La muestra final incluyó a 164 pacientes con una edad media de 50.4 años en los hombres y 50.6 años en las mujeres. La arteria aorta abdominal en su recorrido hasta el espacio L3-L4 se ubica predominantemente del lado izquierdo en la zona A y, al llegar al espacio L4-L5, en el 95,7% de los pacientes, se observó la bifurcación de las arterias ilíacas. La vena cava mostró una tendencia de localización hacia el lado derecho y su bifurcación a nivel de L4-L5. Conclusiones: La planificación preoperatoria y la delimitación de la zona segura representan un método sencillo para evaluar la posición relativa de las estructuras anatómicas neurales y vasculares en relación con el área quirúrgica. Este método puede ayudar a los cirujanos de columna a prevenir complicaciones perioperatorias. Nivel de Evidencia: IV
Objective: The objective of this study is to provide an anatomical description of the structures involved in the extreme lateral interbody fusion (XLIF) technique based on MRI images in the dorsal decubitus position. Materials and Methods: An observational, descriptive, and retrospective study of 200 patients treated at our institution was conducted using MRI images of the lumbosacral spine. The vena cava, aorta artery, and the width and height of the psoas muscle were measured in axial images to establish the safe and danger zones. Results: The final sample consisted of 164 patients, with a mean age of 50.4 for males and 50.6 for females. The abdominal aorta artery is located predominantly on the left side zone A on its path to the L3-L4 space. When it reaches the L4-L5 area, the iliac arteries bifurcate in 95.7% of the patients. The vena cava tends to be located on the right side, bifurcating at the L4-L5 level. Conclusions: Preoperative planning and safe zone delimitation are simple methods for determining the relative position of neural and vascular anatomical structures in relation to the surgical area. This technique can help spine surgeons prevent perioperative complications..Level of Evidence:IV
Subject(s)
Spinal Fusion , Spine , Magnetic Resonance ImagingABSTRACT
ABSTRACT Objective: evaluate the correlation between main sacropelvic alignment measurements and pelvic retroversion reduction and assessing Lamartina Square effectiveness in choosing the proximal instrumentation level. Methods: sample comprising 21 patients with high-grade L5 -S1 spondylolisthesis subjected to arthrodesis with instrumentation from January 2004 to December 2016. Patients' demographic data, surgery type, complications, sagittal alignment parameters, Severity Index and Lamartina Square were recorded before surgery and in the last follow-up. Data processed in SPSS 22.0, with different means were calculated through Student's t test, for paired data. Linear correlation analysis was performed based on Spearman's coefficient. P <0.05 was statically significant. Results: there was significant improvement in the slip and Dubousset's lumbosacral kyphosis angles (> 100° in the last postoperative follow-up). There was significant reduction of slip rate ( and in the L4 and L5 Severity Index, which highlighted strong correlation to pelvic tilt, mismatch and slip angle. Severity index also showed strong inverse correlation between Dubousset's lumbosacral kyphosis angle and sacral slope. Conclusion: L5 Severity Index and Lamartina Square are important variables for preoperative planning of patients with high-grade lumbar spondylolisthesis. Level of Evidence IV; Case Series.
Resumo: Objetivo: avaliar a correlação entre as principais medidas do alinhamento sacropélvico com a retroversão pélvica e avaliar a efetividade do Lamartina Square na escolha do nível proximal de intrumentação. Métodos: amostra com 21 pacientes com espondilolistese de alto grau L5-S1, submetidos à artrodese com instrumentação, de 01/2004 a 12/2016. Os dados demográficos dos pacientes, tipos de cirurgias, complicações, parâmetros do alinhamento sagital, Severity Index e Lamartina Square foram registrados antes da cirurgia e no último acompanhamento. Dados processados no SPSS 22.0 com as diferenças das médias calculadas utilizando-se o teste t de Student para dados emparelhados. A análise da correlação linear foi realizada pelo coeficiente de Spearman. Significantes as análises com p < 0,05. Resultados: melhora significativa do ângulo de deslizamento e de cifose lumbosacral de Dubousset´s (> 100° no ultimo seguimento pósoperatório). Redução significativa da porcentagem de deslizamento ( e do severity index em L4 e L5. Este teve uma forte correlação direta com: tilt pélvico, mismatch, ângulo de deslizamento, porcentagem de deslizamento e uma forte inversa com: ângulo de cifose lumbosacral de Dubousset´s e o slope sacral. Conclusão: O Severity Index de L5 e o Lamartina Square devem ser consideradas variáveis importantes no planejamento pré-operatório de pacientes com espondilolistese lombar de alto grau.
Resumen: Objetivo: evaluar la correlación entre las principales medidas de alineación sacropélvica y la reducción de la retroversión pélvica y evaluar la eficacia de Lamartina Square en la elección del nivel de instrumentación proximal. Métodos: muestra compuesta por 21 pacientes con espondilolistesis L5-S1 de alto grado sometidos a artrodesis con instrumentación desde enero de 2004 hasta diciembre de 2016. Se registraron datos demográficos de los pacientes, tipo de cirugía, complicaciones, parámetros de alineación sagital, Índice de Severidad y Cuadrado de Lamartina antes de la cirugía y en el último seguimiento. Los datos procesados en SPSS 22.0, con diferentes medias, se calcularon mediante la prueba t de Student, para datos pareados. Se realizó un análisis de correlación lineal basado en el coeficiente de Spearman. P <0,05 fue estadísticamente significativo. Resultados: hubo mejoría significativa en los ángulos de deslizamiento y cifosis lumbosacra de Dubousset (> 100° en el último control postoperatorio). Hubo una reducción significativa en la tasa de deslizamiento (<50 %) y en el índice de gravedad L4 y L5, que destacó una fuerte correlación con la inclinación pélvica, la falta de coincidencia y el ángulo de deslizamiento. El índice de gravedad también mostró una fuerte correlación inversa entre el ángulo de cifosis lumbosacra de Dubousset y la pendiente sacra. Conclusión: L5 Severity Index y Lamartina Square son variables importantes para la planificación preoperatoria de pacientes con espondilolistesis lumbar de alto grado. Nivel de Evidencia IV; Serie de Casos.
Subject(s)
Humans , Arthrodesis , Spinal Fusion , Surgical Procedures, OperativeABSTRACT
ABSTRACT Objective: Demonstrate the feasibility of endoscopic assisted L5S1 intraforaminal lumbar interbody fusion (iLIF) through a transiliac approach. Methods: Ten transiliac iLIF and ten supra iliac iLIF were performed bilaterally at L5S1 in five randomly selected fresh-frozen human cadavers. The following measurements were recorded: distances from the transiliac track to the iliac crest, posterior superior iliac spine, and superior gluteal neurovascular bundle; pelvic parameters; approach angles; cage's lateral and AP center point ratio (CPR); percentage of the cage crossing the midline in the AP and lateral views. Endplate integrity was assessed through endoscopic visualization. In addition, the facet joint, sacroiliac joint, iliolumbar ligament, and exiting and traversing nerve roots were checked for integrity through anatomic dissection. Results: In the transiliac technique, the axial and coronal approach angles were significantly decreased by 13.5º (95% CI -15.5; -11.5; p value<0.001) and 13.2º (95% CI -15.3; -11.1; p value<0.001), respectively, the sagittal approach angle was significantly increased by 5.4º (95% CI 1.8,8.9; p-value = 0.008), and the AP CPR was significantly higher (MD 0.16; 95% CI 0.12,0.20; p value<0.001). The percentage of the cage crossing the AP view's midline was increased by 31.6% (95% CI 19.8,43.4; p value<0.001). The integrity of endplates, facet joints, sacroiliac joints, iliolumbar ligament, and exiting and traversing nerve roots was maintained. Conclusion: L5S1 transiliac iLIF is a feasible surgical technique. It allows a more centrally placed interbody cage in the coronal plane without compromising the anterior position in the lateral plane. The integrity of the major anatomic structures at risk was preserved. Evidence Level III: A case-control study.
Resumo: Objetivo: Demonstrar a viabilidade da fusão intersomática lombar assistida por endoscopia (iLIF) em L5S1 através de abordagem transilíaca. Métodos: Dez iLIF por via transilíaca e dez iLIF por via suprailíaca foram realizados bilateralmente em L5S1 em cinco cadáveres selecionados aleatoriamente. Foram registadas as seguintes medidas: Distâncias da via transilíaca até a crista ilíaca, crista ilíaca póstero-superior e feixe neurovascular do glúteo superior; parâmetros pélvicos; ângulos da abordagem; relação do ponto central lateral e AP do cage (CPR); percentagem do cage cruzando a linha média nas incidências AP e perfil. A integridade das placas vertebrais foi avaliada através de visualização endoscópica. Foi verificada através de dissecção anatómica a integridade das articulações facetárias, sacroilíacas, ligamento iliolombar e raízes de L5 e S1. Resultados: Na técnica transilíaca, os ângulos de abordagem axial e coronal foram significativamente menores em 13,5º (CI 95% -15,5;-11,5; p<0,001) e 13,2º (CI 95% -15,3;-11,1; p<0,001 ), respectivamente, o ângulo de abordagem sagital aumentou significativamente em 5,4º (CI 95% 1,8,8,9; p = 0,008), e o AP CPR foi significativamente maior (MD 0,16; CI 95% 0,12,0,20; p <0,001). A percentagem do cage cruzando a linha média em AP foi superior em 31,6% (CI 95% 19,8,43,4; valor p<0,001). A integridade das placas vertebrais, articulações facetadas, articulações sacroilíacas, ligamento iliolombar e raízes de L5 e S1 foi mantida. Conclusão: A realização de iLIF L5S1 por via transilíaca é uma técnica cirúrgica viável. Permite que o cage seja colocado mais centrado no plano coronal sem comprometer a posição anterior no plano sagital. A integridade das principais estruturas anatómicas em risco foi preservada. Nível de Evidencia III: Estudo caso-controle.
Resumen: Objetivo: Demostrar la viabilidad de la fusión intersomática lumbar asistida por endoscopia (iLIF) en L5S1 con un abordaje transilíaco. Métodos: Se registraron las siguientes mediciones: distancias del abordaje transilíaco a la cresta ilíaca, la cresta ilíaca posterosuperior y el haz neurovascular glúteo superior; parámetros pélvicos; ángulos de abordaje; relación del punto medio lateral y AP del cage (CPR); porcentaje del cage que cruza la línea media en las incidencias AP y perfil. Se evaluó la integridad de las placas vertebrales por visualización endoscópica. Se comprobó la integridad de las articulaciones facetarias, las articulaciones sacroilíacas, el ligamento iliolumbar y las raíces de L5 y S1 mediante disección anatómica. Resultados: En la técnica transilíaca, los ángulos de abordaje axial y coronal fueron significativamente menores en 13,5° (IC 95% -15,5;-11,5; p<0,001) y 13,2º (IC 95% -15,3;-11,1); p<0,001 ), respectivamente, el ángulo de aproximación sagital aumentó significativamente en 5,4º (IC 95% 1,8,8,9; p = 0,008), y el AP CPR fue significativamente mayor (MD 0,16; IC 95% 0,12,0,20; p <0,001). El porcentaje del cage que cruzaba la línea media en AP era mayor en un 31,6% (IC 95% 19,8,43,4; valor p <0,001). Se mantuvo la integridad de las placas vertebrales, las articulaciones facetarias, las articulaciones sacroilíacas, el ligamento iliolumbar y las raíces de L5 y S1. Conclusión: La iLIF transilíaca L5S1 es una técnica quirúrgica viable. Permite colocar el cage más centrado en el plano coronal sin comprometer la posición anterior en el plano sagital. Se preservó la integridad de las principales estructuras anatómicas en riesgo. Nivel de evidencia III: Estudio de casos y controles.
Subject(s)
Humans , Spinal Fusion , Ilium , Pelvic BonesABSTRACT
ABSTRACT Introduction: This study describes the imaging characteristics and accessibility of the L4 / L5 left oblique corridor used in the OLIF spinal fusion approach and the dimensions of the left oblique corridor at L2/L3 and L3/L4. Methods: Observational, retrospective, and descriptive study, in which MRI is described for 330 patients. The length of the left OC L2/L3, L3/L4, and L4/L5 were measured and classified into four grades: 0 (not measurable), 1 (≤10 mm), 2 (10-20 mm), and 3 (≥20 mm). The psoas was measured at the level of the L4 / L5, and the modified Moro classification was used for the height of the psoas, considering high psoas from AII to AIV. The data was processed in the SPSS 26.0 system. Results: The mean age was 62.1 ± 13.5 years, the OC length in L2/L3, L3/L4 y L4/L5 were 16.1 ± 5.9, 16.2 ± 6.7 and 14.7 ± 8.8 mm, respectively. 14.8% had high psoas. OC grade 0 (2.1%) was obtained in 7 patients, 87 with grade 1 (26.4%), 129 with grade 2 (39.1%), and 107 with grade 3 (32.4%). The length of the OC in males was 2.4 mm (MD, 95% CI: 0.4-4.5, p: 0.02), more than in females. Conclusion: It was shown that 85.2% had an accessible psoas muscle for the left OLIF L4 / L5 approach, 71.5% had an accessible oblique corridor, and only 14.8% had high psoas. These parameters combined, 61.5% of MRI, were appropriate for this approach. Level of evidence III; Retrospective study.
Resumo: Introducción: Este estudio describe las características imagenológicas y la accesibilidad del corredor oblicuo izquierdo L4/L5 utilizado para la fusión intersomática oblicua, así como las dimensiones del corredor oblicuo izquierdo en L2/L3 y L3/L4. Métodos: Estudio observacional, retrospectivo y descriptivo, que se describe la RM de 330 pacientes. Se midió la longitud del CO izquierdo L2/L3, L3/L4 y L4/L5 y se clasificó en cuatro grados: 0 (no medible), 1 (≤10 mm), 2 (10-20 mm) y 3 (≥20 mm). El psoas se midió a nivel de L4/L5, para la altura del psoas se utilizó la clasificación de Moro modificada; considerando psoas alto de AII a AIV. Los datos fueron procesados en el sistema SPSS 26.0. Resultados: La edad media fue de 62.1 ± 13.5 años, la longitud de CO en L2/L3, L3/L4 y L4/L5 fue de 16.1 ± 5.9, 16.2 ± 6.7 y 14.7 ± 8.8 mm, respectivamente. El 14.8% tenía psoas alto. En 7 pacientes, se obtuvo CO grado 0 (2.1%), 87 con grado 1 (26.4%), 129 con grado 2 (39.1%) y 107 con grado 3 (32.4%). La longitud de la CO en hombres fue 2.4 mm (DM, IC 95%: 0.4-4.5, p: 0.02) más que en las mujeres. Conclusão: Se demostró que el 85.2% tenía un psoas accesible para el abordaje OLIF L4/L5 izquierdo, el 71.5% tenía corredor oblicuo accesible y solo el 14.8% tenía psoas alto. Combinados estos parámetros, el 61.5% de las RM fueron apropiadas para este abordaje. Nivel de evidencia III; estudio retrospectivo.
Resumen: Introdução: Este estudo descreve as características de imagem e acessibilidade do corredor oblíquo esquerdo L4/L5 usado para a fusão intersomática oblíqua, bem como as dimensões do corredor oblíquo esquerdo em L2/L3 e L3/L4. Métodos: Estudo observacional e descritivo, no qual é descrita a RM de 330 pacientes. O comprimento do OC esquerdo L2/L3, L3/L4 e L4/L5 foi medido e classificado em quatro graus: 0 (não mensurável), 1 (≤10 mm), 2 (10-20 mm) e 3 (≥20 mm). O psoas foi medido no nível de L4/L5 sendo utilizada a classificação de Moro modificada; considerando um psoas alto de AII a AIV. Os dados foram processados no sistema SPSS 26.0. Resultados: A média de idade foi de 62.1 ± 13.5 anos, o comprimento do CO em L2/L3, L3/L4 e L4/L5 foi de 16.1 ± 5.9, 16.2 ± 6.7 e 14.7 ± 8.8 mm, respectivamente. 14.8% tinham psoas alto. Em 7 pacientes obteve-se CO grau 0 (2.1%), 87 com grau 1 (26.4%), 129 com grau 2 (39.1%) e 107 com grau 3 (32.4%). O comprimento do CO nos homens foi 2.4 mm (MD, IC 95%: 0.4-4.5, p: 0.02) a mais do que nas mulheres. Conclusión: Evidenciou-se que 85.2% tinham psoas acessível para a abordagem OLIF L4/L5 esquerda, 71.5% tinham corredor oblíquo acessível e apenas 14.8% tinham psoas alto. Combinados esses parâmetros, 61.5% das RMs foram adequadas para essa abordagem. Nível de evidência III; Estudo retrospectivo.
Subject(s)
Humans , Male , Female , Spinal Fusion , Magnetic Resonance Spectroscopy , SpineABSTRACT
Abstract Objective The aim of this study was to assess the sacropelvic anthropometry in the Portuguese population, through the study of pelvic computed tomography (CT) scans. Methods Pelvic CT scans of 40 individuals were analyzed, and the length and angle measurements were performed according to predefined screw trajectories of S1 anterior (S1A), anterolateral (S1AL) and anteromedial (S1AM), S2 anterolateral (S2AL) and anteromedial (S2AM), S2 alar iliac (S2AI), iliac, and sacroiliac (SI) screws. Comparisons between genders were also performed. Results The S1A screw trajectory mean length was 30.80 mm. The S1AL mean length and lateral angle were 36.48 mm and 33.13°, respectively, and the S1AM's were 46.23 mm and 33.21°. The S2AL mean length was 28.66 mm and lateral angle was 26.52°, and the S2AM length and angle were 29.99 mm and 33.61°, respectively. The S2 alar-iliac screw trajectory mean length, lateral, and caudal angles were 125.84 mm, 36.78°, and 28.66°, respectively. The iliac screw trajectory mean length, lateral, and caudal angles were 136.73 mm, 23,86° and 24.01°, respectively. The sacroiliac screw trajectory length was 75.50 mm. The length of the screws was longer in men than in women, except for the S1A and SI screws, for which no difference was found between genders. Conclusion This study describes sacropelvic anatomical specifications. These defined morphometric details should be taken into consideration during surgical procedures.
Resumo Objetivo O objetivo deste estudo foi avaliar a antropometria sacropélvica da população portuguesa por meio de exames de tomografia computadorizada (TC). Métodos Quarenta TCs pélvicas foram analisadas para determinação do comprimento e ângulo das trajetórias definidas dos parafusos, como trajetória anterior (S1A), anterolateral (S1AL) e anteromedial (S1AM) do parafuso no pedículo de S1, trajetória anterolateral (S2AL) e anteromedial (S2AM) do parafuso no pedículo de S2 e trajetória ilíaca alar (S2AI), ilíaca e sacroilíaca (SI) do parafuso em S2. Comparações entre sexos também foram realizadas. Resultados O comprimento médio da trajetória S1A foi de 30,80 mm. O comprimento médio e o ângulo lateral de S1AL foram de 36,48 mm e 33,13°, respectivamente, e de S1AM, 46,23 mm e 33,21°. O comprimento médio e o ângulo lateral de S2AL foram de 28,66 mm e 26,52° e, de S2AM, 29,99 mm e 33,61°. O comprimento médio da trajetória ilíaca alar e os ângulos lateral e caudal do parafuso em S2 foram de 125,84 mm, 36,78° e 28,66°, respectivamente. O comprimento médio da trajetória ilíaca e os ângulos lateral e caudal foram 136,73 mm, 23,86° e 24,01°, respectivamente. O comprimento da trajetória sacroilíaca foi de 75,50 mm. O comprimento dos parafusos foi maior em homens do que em mulheres, à exceção dos parafusos S1A e SI, que não apresentaram diferenças entre os sexos. Conclusão Este estudo descreve as especificações anatômicas sacropélvicas. Esses detalhes morfométricos definidos devem ser considerados durante os procedimentos cirúrgicos.
Subject(s)
Humans , Male , Female , Sacrum , Spinal Fusion , Tomography, X-Ray Computed , Anthropometry , Retrospective Studies , Lumbar VertebraeABSTRACT
Introdução: o tratamento cirúrgico de pacientes com fraturas do processo odontoide tem sido controverso. As principais técnicas cirúrgicas para o segmento C1-C2 incluem além da artrodese cervical (aramagem tipo Gallie, parafusos transarticulares e aramagem tipo 88), a fixação direta com parafuso no processo odontoide. Objetivo: comparar a estabilidade mecânica destes quatro tipos de osteossínteses do segmento atlantoaxial (C1-C2). Metodologia: vinte segmentos atlantoaxiais de cadáveres humanos adultos foram preparados com fraturas do tipo 2 de Anderson e D'Alonso e divididos em quatro grupos: aramagem tipo Gallie (aG); parafusos transarticulares (pT); parafuso no processo odontoide (pD); aramagem tipo 88 (a88). Os corpos de prova foram submetidos a esforços de flexocompressão em máquina universal de ensaios mecânicos para análise de resistência, elasticidade e deformações. Resultados:na fase de acomodação, os parafusos no processo odontoide apresentaram pouquíssima mobilidade com cargas baixas. Na fase de elasticidade, não houve diferença significativa entre as construções testadas. Com relação à resistência máxima suportada pelas construções, houve uma diferença estatisticamente significativa a favor da aramagem tipo Gallie. Conclusão: nossos testes mostraram que em relação à acomodação houve diferença significativa entre a aramagem tipo Gallie e o parafuso no processo odontoide; e quanto à resistência máxima, entre a aramagem tipo Gallie e o parafuso transarticular.
Introduction: the surgical treatment of patients with fractures of the odontoid process has been controversial. The main surgical techniques for C1-C2 are: Gallie wiring, transarticular screw, direct odontoid process screw and 88 posterior laminar wiring. Objective: to compare the mechanical stability of these four types of atlantoaxial segment osteosynthesis (C1/C2). Methodology: twenty atlantoaxial segments of adult human cadavers were prepared with Anderson and D'Alonso type II fractures and divided into four groups: Gallie wiring; transarticular screw; odontoid process screw; 88 wiring. After being fixed with each osteosynthesis technique, they were submitted to flexocompression efforts in a universal mechanical testing machine for analysis of strength, elasticity and deformations. Results: in the accommodation phase, the odontoid process screws showed very little mobility with low loads. In the elasticity phase, there was no significant difference between the constructions tested. With regard to the maximum resistance supported by the constructions, there was a statistically significant difference in favor of Gallie wiring. Conclusion: Our tests showed a significant difference between Gallie wiring and odontoid process screw in accommodation; and between the Gallie wiring and the transarticular screw in maximum resistance test
Subject(s)
Humans , Male , Female , Adult , Spinal Fusion , Fractures, Bone , Fracture Fixation, Internal , Odontoid Process , CadaverABSTRACT
Abstract Objective The present study evaluates radiographic outcomes and the lumbar lordosis achieved with a transforaminal lumbar interbody fusion (TLIF) arthrodesis technique according to the positioning of an interbody device (cage) in the disc space. Methods This is a retrospective radiographic analysis of single-level surgical patients with degenerative lumbar disease submitted to a TLIF procedure and posterior pedicle instrumentation. We divided patients into two groups according to cage positioning. For the TLIF-A group, the cages were anterior to the disc space; for the TLIF-P group, cages were posterior to the disc space. Considering the superior vertebral plateau of the lower vertebra included in the instrumentation, cages occupying a surface equal to the anterior 50% of the midline were placed in the TLIF-A group, and those in a posterior position were placed in the TLIF-P group. We assessed pre- and postoperative orthostatic lateral radiographs to obtain the following measures: lumbar lordosis (LL) (angle L1-S1), segmental lordosis (LS) (L4-S1), and segmental lordosis of the cage (SLC). Results The present study included 100 patients from 2011 to 2018; 44 were males, and 46 were females. Their mean age was 50.5 years old (range, 27 to 76 years old). In total, 43 cages were "anterior" (TLIF-A) and 57 were "posterior" (TLIF-P). After surgery, the mean findings for the TLIF-A group were the following: LL, 50.7°, SL 34.9°, and SLC 21.6°; in comparison, the findings for the TLIF-P group were the following: LL, 42.3° (p< 0.01), SL 30.7° (p< 0.05), and SLC 18.8° (p> 0.05). Conclusion Cage positioning anterior to the disc space improved lumbar and segmental lordosis on radiographs compared with a posterior placement.
Resumo Objetivo Avaliar os resultados radiográficos e comparar a lordose pós-operatória em técnica de artrodese intersomática lombar transforaminal (TLIF, na sigla em inglês), considerando como variável o posicionamento do dispositivo intersomático (cage) em relação ao espaço discal. Métodos Análise retrospectiva radiográfica de pacientes cirúrgicos, em nível único, por doença lombar degenerativa, aplicando-se TLIF e instrumentação pedicular posterior. Os pacientes foram divididos, conforme a posição do cage, em 2 grupos: 1. TLIF-A - cages na posição anterior do espaço discal; e 2. TLIF-P, cages na posição posterior do espaço discal (considerando-se o platô vertebral superior da vértebra inferior incluída na instrumentação, cages que ocuparam a superfície correspondente a 50% anterior da linha média, compuseram o grupo TLIF-A; opostamente, cages em posicionamento posterior compuseram o grupo TLIF-P). Procedeu-se à avaliação dos exames radiográficos ortostáticos em perfil no pré- e pós-operatórios, com a tomada das seguintes medidas: lordose lombar (LL) (ângulo L1-S1); lordose segmentar (LS) (L4-S1) e lordose segmentar do cage (LSC). Resultados Cem pacientes foram incluídos de 2011 a 2018, sendo 44 homens e 46 mulheres, com idade média de 50.5 anos (27-76 anos). Um total de 43 cages foram classificados como "anteriores" (TLIF-A) e 57, "posteriores" (TLIF-P); considerando o grupo TLIF- A, os resultados pós-operatórios médios foram: LL 50.7°, LS 34.9° e LSC 21.6°; para o grupo TLIF-P, comparativamente: LL 42.3° (p< 0,01), LS 30.7° (p< 0,05) e LSC 18.8° (p> 0,05). Conclusão O posicionamento anterior do cage em relação ao espaço discal correlaciona-se a melhora da lordose lombar e segmentar na radiografia em comparação com o posicionamento posterior do implante.
Subject(s)
Humans , Male , Female , Adult , Middle Aged , Aged , Spinal Fusion , Spondylolisthesis , Lordosis , Lumbosacral RegionABSTRACT
Abstract Objectives The present study aims to characterize the spinal balance (SB) in young adults with Schmorl nodes (SN). Methods A cross-sectional study was conducted on a sample of 47 young adults. Lumbar magnetic resonance imaging (MRI) was used to divide the patients into an SN group and a control group. Standing full spine radiographs were used to compare the spinopelvic SB parameters between groups: sagittal vertical axis, thoracic kyphosis, lumbar lordosis (LL), pelvic incidence (PI), pelvic tilt (PT), and sacral slope (SS). Results The LL and SS values were significantly lower in patients with SN when compared with the control group (54.5° versus 64.3°; 36.2° versus 41.4°, respectively). No significant differences were observed for the other parameters. Significant correlations were found in both groups between LL and SS; PI and PT; and PI and SS. Conclusions Young adults with SN have associated SB modifications, particularly lower LL and SS values, when compared with a control group. This flatter profile resembles that observed in patients with lower back pain and early disc pathology. We believe that SNs are relevant clinical findings that should prompt the study of the SB of a patient, as it may uncover variations associated with early disc degeneration. Level of Evidence III
Resumo Objetivos O presente estudo tem como objetivo caracterizar o equilíbrio sagital (SB, na sigla em inglês) espinhal em adultos jovens com nódulos de Schmorl (NS). Métodos Este é um estudo transversal de uma amostra composta por 47 adultos jovens. Ressonância magnética (RM) lombar foi usada para separar os pacientes em um grupo com NS e um grupo controle. Radiografias da coluna vertebral em pé foram usadas para comparar os parâmetros espinopélvicos do SB entre os grupos: eixo vertical sagital, cifose torácica, lordose lombar (LL), incidência pélvica (PI, na sigla em inglês), inclinação pélvica (PT, na sigla em inglês) e inclinação sacral (SS, na sigla em inglês). Resultados Os valores de LL e SS foram significativamente menores nos pacientes com NS em comparação com o grupo controle (54,5° versus 64,3°; 36,2° versus 41,4°, respectivamente). Não foram observadas diferenças significativas nos demais parâmetros. Os dois grupos apresentaram correlações significativas entre LL e SS, PI e PT e PI e SS. Conclusões Adultos jovens com NS apresentam modificações associadas ao SB, principalmente valores menores de LL e SS, em comparação com o grupo controle. Este perfil mais plano assemelha-se ao observado em pacientes com lombalgia e patologia discal em estágio inicial. Acreditamos que o NS seja um achado clínico relevante que deve levar ao estudo do SB de um paciente por poder revelar variações associadas aos primeiros estágios de degeneração discal. Nível de Evidência III
Subject(s)
Humans , Male , Female , Adolescent , Adult , Spinal Fusion , Magnetic Resonance Imaging , Control Groups , Cross-Sectional Studies , Lordosis/diagnostic imaging , Lumbar Vertebrae/pathologyABSTRACT
Abstract Objective We aimed to study the "in vitro" pullout strength of SpineGuard/Zavation Dynamic Surgical Guidance Z-Direct Screw (DSG Screw, SpineGuard Inc, Boulder, Colorado, USA), a screw designed to be inserted using a direct insertion technique. Methods Dynamic Surgical Guidance Screws of 5.5 and 6.5 mm were introduced into polyurethane blocks with a density of 10 PCF (0,16g/cm3). According to the experimental group, screws were inserted without pilot hole, with pilot without tapping, undertapping and line-to-line tapping. Screw pullout tests were performed using a universal test machine after screw insertion into polyurethane blocks. Results Screws inserted directly into the polyurethane blocks without pilot hole and tapping showed a statistically higher pullout strength. Insertion of the screw without tapping or with undertapping increases the pullout screw strength compared with lineto-line tapping. Conclusion Dynamic Surgical Guidance Screw showed the highest pullout strength after its insertion without pilot hole and tapping.
Resumo Objetivo Nosso objetivo foi estudar a resistência à extração "in vitro" do parafuso SpineGuard/Zavation Dynamic Surgical Guidance Z-Direct (Parafuso DSG Guia Cirúrgico Dinâmico, SpineGuard Inc, Boulder, Colorado, USA), um parafuso projetado para ser inserido utilizando a técnica de inserção direta. Métodos Os parafusos DSG de 5,5 e 6,5 mm foram introduzidos em blocos de poliuretano com densidade de 10 PCF (0,16g/cm3). De acordo com o grupo experimental, os parafusos foram inseridos sem um orifício piloto, com um orifício piloto sem o macheamento, com macheamento e com macheamento linha a linha. Os testes de extração do parafuso foram realizados em uma máquina de teste universal, após a inserção do parafuso em blocos de poliuretano. Resultados Os parafusos inseridos diretamente nos blocos de poliuretano sem o orifício piloto e o macheamento mostraram uma resistência à extração estatisticamente maior. A inserção do parafuso sem o macheamento ou com o macho de menor diâmetro aumenta a resistência à extração do parafuso em comparação com o macheamento linha a linha. Conclusão O parafuso DSG apresentou a maior resistência à extração após a inserção sem o orifício piloto e o macheamento.
Subject(s)
Spinal Fusion , Biomechanical Phenomena/physiology , Bone Screws , Pedicle ScrewsABSTRACT
Abstract Objective The approachability of the cervicothoracic region anteriorly based on age and gender, and the possibility of anatomic variances in different geographic populations have not been previously investigated. The aim of the present work was to perform a radiographic analysis of Brazilian patients to assess anterior approachability of the cervicothoracic junction based on age and gender. Methods Retrospective radiographic analysis of 300 computed tomography scans. Patients were separated based on age and gender. The radiographic parameters studied were: horizontal level above the sternum (HLS), vertebral body angle (VBA), intervertebral disc line (IDL), and intervertebral disc line angulation (IDLA). Results The most frequent HLS and IDL were T2 (34.3%) and C7-T1 (46%) respectively. Vertebral body angleand IDLA had average values of 18 ± 8.94 and 19 ± 7.9 degrees, respectively. Males had higher values in both IDLA (p= 0.003) and VBA (p= 0.02). Older groups had higher values in both IDLA (p= 0.01) and VBA (p= 0.001). No differences were observed in HLS between gender (p= 0.3) or age groups (p= 0.79). No differences were seen in IDL between gender groups (p= 0.3); however, the older group had a more caudal level than the younger groups (p= 0.12). ConclusionsCompared to other populations, our sample had a more cephalad IDL and HLS. Vertebral body angle and IDLA were higher in males and higher angles for VBA and IDLA were shown for older groups. Intervertebral disc line was more caudal with aging.
Resumo Objetivo A capacidade de acesso anterior à região cervicotorácica com base na idade e gênero do paciente e a possibilidade de variações anatômicas em diferentes populações geográficas ainda não foram investigadas. O objetivo deste trabalho foi realizar uma análise radiográfica de pacientes brasileiros para avaliar a acessibilidade anterior da junção cervicotorácica conforme idade e gênero. Métodos Análise radiográfica retrospectiva de 300 tomografias computadorizadas. Os pacientes foram separados por idade e gênero. Os parâmetros radiográficos estudados foram: nível horizontal acima do esterno (HLS, na sigla em inglês), angulação do corpo vertebral (VBA, na sigla em inglês), linha do disco intervertebral (IDL, na sigla em inglês) e angulação da linha do disco intervertebral (IDLA, na sigla em inglês). Resultados Os HLS e IDL mais frequentes foram T2 (34,3%) e C7-T1 (46%), respectivamente. Os valores médios de VBA e IDLA foram de 18 ± 8,94 e 19 ± 7,9 graus, respectivamente. Os homens apresentaram valores maiores de IDLA (p= 0,003) e VBA (p= 0,02). Os grupos de maior idade apresentaram valores maiores de IDLA (p= 0,01) e VBA (p= 0,001). Não houve diferenças de HLS entre os gêneros masculino e feminino (p= 0,3) ou faixas etárias (p= 0,79). Não foram observadas diferenças na IDL entre os gêneros masculino e feminino (p= 0,3); entretanto, o grupo mais velho apresentou nível mais caudal do que os grupos mais jovens (p= 0,12). ConclusõesEm comparação a outras populações, nossa amostra apresentou IDL e HLS mais cefálicos. AVBA e a IDLA foram maiores no gênero masculino, enquanto VBA e IDLA foram maiores em grupos mais velhos. A IDL era mais caudal em pacientes idosos.
Subject(s)
Humans , Male , Female , Adult , Middle Aged , Spinal Diseases , Spinal Fusion , Thoracic Vertebrae , Tomography, X-Ray Computed , Retrospective Studies , Gender Identity , Intervertebral DiscABSTRACT
ABSTRACT Objective: To evaluate the temporal trends of thoracolumbar fusion procedures performed by the United Health System in Brazil from 2009 to 2019. Methods: This was an observational ecological study based on data collected from the information systems under the aegis of DATASUS, especially the Hospital Information System, which manages the Hospital Admission Authorizations (Autorizações de Internação Hospitalar - AIHs). All patients who had undergone the procedures of interest, that is, elective and emergency short and long thoracolumbar arthrodeses, were included. The temporal trends of the procedures performed in Brazil and in its five regions were calculated using polynomial regression. Results: The temporal trend of elective thoracolumbar arthrodesis decreased, while that of emergency arthrodesis increased, with the peak in 2015, followed by a marked decline. Short fusions were more frequent in both elective and emergency modalities, and the South and Central-West Regions had the highest indices of procedures per million inhabitants during the entire 2009 to 2019 period. Conclusions: The temporal trends of thoracolumbar fusions performed by SUS have decreased over the last decade, a phenomenon which may be explained by the growing criticism of indications of the procedure in the current literature. Level of evidence III; Retrospective Comparative Study.
RESUMO: Objetivo: Analisar a tendência temporal dos procedimentos de artrodese toracolombar realizados pelo Sistema Único de Saúde no Brasil entre os anos de 2009 e 2019. Métodos: Trata-se de estudo observacional de delineamento ecológico, baseado em dados secundários coletados a partir dos sistemas de informação sob guarda do DATASUS, em especial do Sistema de Informações Hospitalares, que gerencia as Autorizações de Internação Hospitalar (AIHs). Foram incluídos todos os pacientes submetidos aos procedimentos de interesse, de caráter eletivo e de urgência, correspondentes às artrodeses toracolombares curtas e longas. A tendência temporal foi avaliada através da regressão polinomial dos procedimentos realizados no Brasil e em suas cinco regiões federativas. Resultados: A tendência temporal das artrodeses eletivas foi decrescente e a das artrodeses de urgência foi crescente, com pico em 2015, seguida de franco declínio. As artrodeses curtas foram mais frequentes em ambas as modalidades de urgência e eletiva, e as regiões Sul e Centro-Oeste obtiveram os maiores índices de procedimentos por milhão de habitantes em todo período de 2009 a 2019. Conclusão: A tendência temporal das artrodeses toracolombares realizadas pelo SUS tem caráter decrescente na última década, fenômeno que pode ser justificado pela crescente criticidade perante as indicações do procedimento na literatura contemporânea. Nível de evidência III; Estudo Retrospectivo Comparativo.
RESUMEN: Objetivo: Analizar la tendencia temporal de los procedimientos de artrodesis toracolumbar realizados por el Sistema Único de Salud en Brasil entre 2009 y 2019. Métodos: Se trata de un estudio observacional de diseño ecológico, basado en datos secundarios colectados de los sistemas de información en poder de DATASUS, en particular por el Sistema de Información Hospitalaria, que gestiona las Autorizaciones de Admisión Hospitalaria (AIH). Se incluyeron todos los pacientes sometidos a procedimientos de carácter urgente y electivo, correspondientes a artrodesis toracolumbar corta y larga. La tendencia temporal se evaluó mediante regresión polinomial de los procedimientos realizados en Brasil y sus cinco regiones federativas. Resultados: La tendencia temporal de la artrodesis electiva fue decreciente y la de la artrodesis de urgencia fue creciente, alcanzando el pico en 2015, seguido de un fuerte descenso. Los casos de artrodesis cortas fueron más frecuentes tanto en las modalidades de urgencia como en las electivas, y las regiones Sur y Medio Oeste tuvieron las tasas más altas de procedimientos por millón de habitantes en todo el período de 2009 a 2019. Conclusión: La tendencia temporal de las artrodesis toracolumbares realizadas por el SUS tiene un carácter decreciente en la última década, fenómeno que puede justificarse por la creciente criticidad de las indicaciones del procedimiento en la literatura contemporánea. Nivel de evidencia III; Estudio Retrospectivo Comparativo.
Subject(s)
Spinal Fusion , Spinal Fractures , Orthopedics , SpineABSTRACT
ABSTRACT Objective: To relate the radiographic fusion rate and the surgical results in patients undergoing posterolateral arthrodesis with instrumentation of the lumbar spine for the treatment of degenerative disorders. Method: A descriptive, retrospective, case series, observational study, based on medical records and imaging studies of 76 patients over 18 years of age (39 to 88 years) who underwent posterolateral lumbar arthrodesis. Data related to the presence of comorbidities were compiled and clinical outcomes were measured using specific questionnaires collected pre-surgical and 1 year after surgery. Fusion quality, as described by Christensen, was assessed from radiographic images by two examiners. The VAS, EQ-5D and Roland Morris questionnaires were used preoperatively and 1 year after surgery to assess pain, quality of life and function, respectively. Result: It was observed improvement in pain, function and quality of life after 1 year post-surgical. Pain, measured by VAS, had a reduction from 7.92 to 3.16 (p-value <0.001), the function evaluated by the Roland Morris score, also showed a reduction from 14.90 to 7.06 (p-value <0.001) . Culminating with the improvement in quality of life, measured by the EQ-5D, where there was a median increase in the score from 0.5672 to 0.7002 (p-value = 0.002). Conclusion: The absence of radiographic fusion has no direct correlation with worse results in clinical outcomes at 01 year after surgery. Most patients showed clinical improvement with no statistical difference in relation to cases in which bone fusion was obtained. Level of evidence IV; retrospective observation.
RESUMO: Objetivo: Relacionar a taxa de fusão radiográfica e os resultados cirúrgicos nos pacientes submetidos a artrodese posterolateral com instrumentação da coluna lombar para tratamento de afecções degenerativas. Método: Estudo observacional retrospectivo descritivo, tipo série de casos, com base em prontuários médicos e exames de imagem de 76 pacientes maiores de 18 anos (39 a 88 anos), submetidos a artrodese lombar posterolateral. Dados relacionados a presença de comorbidades foram compilados e os desfechos clínicos mensurados por meio de questionários específicos coletados no pré-cirúrgico e após um ano pós-cirúrgico. A qualidade da fusão, conforme descrita por Christensen, foi avaliada a partir de imagens radiográficas por dois examinadores. Os questionários de EVA, EQ-5D e Roland Morris foram utilizados no pré-cirúrgico e um ano pós-cirúrgico para avaliar dor, qualidade de vida e função, respectivamente. Resultado: Observou se melhora na dor, função e qualidade de vida após um ano pós-cirúrgico. A dor, mensurada pelo EVA teve uma redução de 7,92 para 3,16 (p-valor <0,001), a função avaliada pelo escore Roland Morris, também apresentou redução de 14,90 para 7,06 (p-valor <0,001). Culminando com a melhora na qualidade de vida, mensurada pelo EQ-5D, onde observou-se um aumento mediano escore de 0,5672 para 0,7002 (p-valor = 0,002). Conclusão: A ausência de fusão radiográfica não tem correlação direta com piores resultados nos desfechos clínicos em um ano de pós-cirúrgico. Maioritariamente, os pacientes apresentaram melhora clínica sem diferença estatística em relação aos casos em que foi obtido fusão óssea. Nível de evidência IV; Observacional retrospectivo.
RESUMEN: Objetivo: Relacionar ei índice de fusión radiográfica y los resultados quirúrgicos en pacientes sometidos a artrodesis posterolateral con instrumentación de columna lumbar para el tratamiento de trastornos degenerativos. Método: Estudio descriptivo, retrospectivo, serie de casos, observacional, basado en historias clínicas y estudios de imagen de 76 pacientes may ores de 18 anos (39 a 88 anos) a quienes se les realizó artrodesis lumbar posterolateral. Se recopilaron datos relacionados con la presencia de comorbilidades y se midieron los resultados clínicos mediante cuestionarios específicos recogidos antes de la cirugía y al año de la cirugía. La calidad de la fusión, según lo descrito por Christensen, fue evaluada a partir de imágenes radiográficas por dos examinadores. Los cuestionarios VAS, EQ-5D y Roland Morris se utilizaron en el preoperatorio y 1 año después de la cirugía para evaluar el dolor, la calidad de vida y la función, respectivamente. Resultado: Se observó mejoría en el dolor, función y calidad de vida después de 1 año posquirúrgico. El dolor, medido por EVA, tuvo una reducción de 7,92 a 3,16 (p-valor <0,001), la función evaluada por el puntaje de Roland Morris, también mostró una reducción de 14,90 a 7,06 (p-valor <0,001). Culminando con la mejora en la calidad de vida, medida por el EQ-5D, donde hubo un aumento mediano en el puntaje de 0,5672 a 0,7002 (p-valor = 0,002). Conclusión: La ausencia de fusión radiográfica no tiene correlación directa con peores resultados en los resultados clínicos al 01 año de la cirugía. La mayoría de los pacientes presentaron mejoría clínica sin diferencia estadística en relación a los casos en los que se obtuvo fusión ósea. Nivel de evidencia IV; observación retrospectiva.
Subject(s)
Humans , Adult , Middle Aged , Aged , Aged, 80 and over , Spinal Fusion , Orthopedics , Orthopedic ProceduresABSTRACT
ABSTRACT Introduction: This study aims to evaluate the safety of using the cortical path screw with transfixation of the second cortical bone in relation to the vascular structures. Methods: This retrospective observational study (level of evidence: III, study of non-consecutive patients) analyzed data from the medical records of patients who underwent computed angiotomography scans of the abdomen at Hospital Mater Dei, measuring, in millimeters, the distance between the point of the lumbar vertebra considered the anatomical reference for the transfixation of the second cortical bone and the vascular structures adjacent to the spine (abdominal aorta, inferior vena cava, iliac vessels, segmental lumbar arteries). Results: Forty-eight patients were evaluated, with a mean age of 60 years (±8 years, 41-75), of whom 52% were male and 48% female. The measurements obtained between the pre-vertebral vessels and the possible screw exit points did not demonstrate contact in any of the vertebrae studied. Conclusions: The measurements obtained suggest the safety of using the cortical path screw transfixing the second cortical bone. Knowing the position of the vessels is essential to reduce intra- and postoperative complications related to spinal instrumentation. Level of evidence III; Study of non-consecutive patients.
RESUMO Introdução: Este trabalho objetiva avaliar a segurança do uso do parafuso de trajeto cortical com transfixação da segunda cortical óssea com relação às estruturas vasculares. Métodos: Estudo observacional retrospectivo (nível de evidência: III, estudo de pacientes não consecutivos) analisou dados de prontuários de pacientes submetidos ao exame de angiotomografia computadorizada do abdome no Hospital Mater Dei, realizando a medida, em milímetros, entre o ponto da vértebra lombar considerado a referência anatômica para a transfixação da segunda cortical óssea e as estruturas vasculares adjacentes à coluna (aorta abdominal, veia cava inferior, vasos ilíacos, artérias lombares segmentares). Resultados: Foram avaliados 48 pacientes, com média de idade de 60 anos (±8 anos, 41-75), sendo 52% do sexo masculino e 48% do feminino. As medidas obtidas entre os vasos pré-vertebrais e os pontos possíveis de saída do parafuso não demonstraram contato, em todas as vértebras estudadas. Conclusões: As medidas obtidas sugerem a segurança do uso do parafuso de trajeto cortical transfixando a segunda cortical óssea. Conhecer a posição dos vasos é essencial para reduzir as complicações intra e pós-operatórias relacionadas à instrumentação da coluna vertebral. Nível de evidência III; Estudo de pacientes não consecutivos.
RESUMEN Introducción: Este estudio tiene como objetivo evaluar la seguridad del uso del tornillo de trayectoria cortical con transfijación de la segunda cortical ósea con respecto a las estructuras vasculares. Métodos: Estudio observacional retrospectivo (nivel de evidencia: III, estudio de pacientes no consecutivos) que analizó datos de registros médicos de pacientes sometidos a examen de angiografía por tomografía computarizada de abdomen en el Hospital Mater Dei, realizando la medición, en milímetros, entre el punto de la vértebra lumbar considerado la referencia anatómica para la transfijación de la segunda cortical ósea y las estructuras vasculares adyacentes a la columna (aorta abdominal, vena cava inferior, vasos ilíacos, arterias lumbares segmentarias). Resultados: Se evaluaron 48 pacientes, con una edad promedio de 60 años (±8 años, 41-75); 52% eran hombres y 48% mujeres. Las medidas obtenidas entre los vasos prevertebrales y los posibles puntos de salida del tornillo no demostraron contacto en todas las vértebras estudiadas. Conclusiones: Las medidas obtenidas sugieren la seguridad de utilizar el tornillo de trayectoria cortical transfijando la segunda cortical ósea. Conocer la posición de los vasos es fundamental para reducir las complicaciones intra y postoperatorias relacionadas con la instrumentación espinal. Nivel de evidencia III; Estudio de pacientes no consecutivos.
Subject(s)
Humans , Male , Female , Middle Aged , Spinal Fusion , Orthopedic Procedures , Blood CirculationABSTRACT
Objetivo: Comunicar los resultados obtenidos según la posición del dispositivo de TLIF anterior. Materiales y Métodos: Estudio multicéntrico, observacional, analítico, transversal, de recuperación retrospectiva. Se evaluaron los parámetros espinopélvicos pre- y posoperatorios de espinogramas de 20 pacientes que fueron operados entre septiembre de 2019 y agosto de 2021. Se incluyó a pacientes sometidos a artrodesis lumbar con implante de tipo TLIF anterior. Se excluyó a pacientes sin espinograma pre- o posquirúrgico y más de un dispositivo. Resultados: La media de la lordosis monosegmentaria fue de 13,33° antes de la cirugía y de 18,81° después (p <0,001). La media de la lordosis monosegmentaria fue de 7,32°; 2,95° y 6,24° para las posiciones I, II y III, respectivamente. La media de la altura discal fue de 6,22 mm en el preoperatorio y 11,06 mm en el posoperatorio (p >0,001). Conclusiones: Los resultados de la colocación de este tipo de dispositivos y su relación con la lordosis segmentaria fueron alentadores, se comprendió la importancia de la disposición de estos en el extremo anterior del espacio discal. Nivel de Evidencia: IV
Objective: To report the results obtained according to the position of an anterior TLIF device. Materials and Methods: Multicenter, observational, analytical, cross-sectional, retrospective recovery study. We evaluated the pre and post-operative spinopelvic pa-rameters of the spinograms of 20 patients who underwent surgery between September 2019 and August 2021. Patients who had undergone lumbar arthrodesis with an anterior TLIF implant were included, whereas patients without a pre or post-surgical spinogram and more than one device were excluded. Results: The mean monosegmental lordosis was 13.33° preoperatively and 18.81° postoperatively (p <0.001). The mean monosegmental lordosis was 7.32°, 2.95°, and 6.24° for positions I, II, and III, respectively. The mean disc height was 6.22 mm for the preoperative period and 11.06 mm for the postoperative period (p >0.001). Conclusion: We found encouraging results on the placement of this type of device and its relationship with segmental lordosis, understanding the importance of its placement at the anterior end of the disc space. Level of Evidence: IV
Subject(s)
Spinal Fusion , Minimally Invasive Surgical Procedures , Lordosis , Lumbar VertebraeABSTRACT
ABSTRACT Objective To describe the technical specificities and feasibility of simulation of minimally invasive spine surgery in live pigs, as well as similarities and differences in comparison to surgery in humans. Methods A total of 22 Large White class swine models, weighing between 60 and 80kg, were submitted to surgical simulations, performed during theoretical-practical courses for training surgical techniques (microsurgical and endoscopic lumbar decompression; percutaneous pedicular instrumentation; lateral access to the thoracic spine, and anterior and retroperitoneal to the lumbar spine, and management of complications) by 86 spine surgeons. For each surgical technique, porcine anatomy (similarities and differences in relation to human anatomy), access route, and dimensions of the instruments and implants used were evaluated. Thus, the authors describe the feasibility of each operative simulation, as well as suggestions to optimize training. Study results are descriptive, with figures and drawings. Results Neural decompression surgeries (microsurgeries and endoscopic) and pedicular instrumentation presented higher similarities to surgery on humans. On the other hand, intradiscal procedures had limitations due to the narrow disc space in swines. We were able to simulate situations of surgical trauma in surgical complication scenarios, such as cerebrospinal fluid fistulas and excessive bleeding, with comparable realism to surgery on humans. Conclusion A porcine model for simulation of minimally invasive spinal surgical techniques had similarities with surgery on humans, and is therefore feasible for surgeon training.
Subject(s)
Animals , Spinal Fusion/methods , Intervertebral Disc Degeneration , Swine , Treatment Outcome , Minimally Invasive Surgical Procedures/methods , Lumbar Vertebrae , Lumbosacral RegionABSTRACT
To find an effective method of minimally invasive treatment combining prevention and assistance in the middle zone of conservative treatment and fusion surgery for lumbar degenerative diseases, through the clinical effect observation and the advantage and disadvantage comparison of several commonly used lumbar interspinous dynamic stabilization systems, by analyzing the physiological structure, biomechanics and relevant data of lumbar interspinous processes, based on fully understanding of memory alloy materials, a new dynamic lumbar interspinous fixation device with a memory alloy material has been independently designed and researched, which can not only reconstruct the normal biomechanical characteristics of the lumbar spine and satisfy the normal activities of the human spine, but also avoid damage to the original structure and reduce the incidence of postoperative complications. In addition, the device can be used to optimize the current therapeutic methods. According to our research, the dynamic lumbar interspinous process stabilization device with a memory alloy has theoretically achieved satisfactory results, which can be used to overcome the shortcomings of the existing technology and is superior to the current several dynamic lumbar interspinous process stabilization systems.
Subject(s)
Humans , Alloys , Biomechanical Phenomena , Lumbar Vertebrae/surgery , Postoperative Complications , Prostheses and Implants , Spinal FusionABSTRACT
Atlantoaxial dislocation (AAD) is a kind of life-threatening atlantoaxial structural instability and a series of neurological dysfunction caused by common multidisciplinary diseases. The operation risk is extremely high because it is adjacent to the medulla oblongata and the location is deep. With the increase of the number of operations in the upper cervical region, postoperative complications such as failure of internal fixation, non fusion of bone graft and poor prognosis gradually increase.Incomplete primary operation, non fusion of bone graft, infection and congenital malformation are the potential causes. In addition, considering the objective factors such as previous graft, scar formation and anatomical marks changes, revision surgery is further difficult. However, there is currently no standard or single effective revision surgery method. Simple anterior surgery is an ideal choice in theory, but it has high risk and high empirical requirements for the operator;simple posterior surgery has some defects, such as insufficient reduction and decompression;anterior decompression combined with posterior fixation fusion is a more reasonable surgical procedure, but many problems such as posterior structural integrity and multilevel fusion need to be considered.This article reviews the causes and strategies of AAD revision surgery.
Subject(s)
Humans , Atlanto-Axial Joint/surgery , Joint Dislocations/surgery , Joint Instability/surgery , Reoperation/adverse effects , Spinal Fusion/methods , Treatment OutcomeABSTRACT
OBJECTIVE@#To manufacture a new type of transverse process retractor by using computer-aided design(CAD) combined with 3D printing technology and investigate its clinical application effect.@*METHODS@#A new type of transverse protrusion retractor was developed by CAD combined with 3D printing technology. From September 2018 to September 2019, the new transverse process retractor was applied in clinic. Sixty patients with lumbar single segment lesions who needed treatment by pedicle screw fixation, bone grafting and interbody fusion were divided into new transverse process retractor group and control group, with 30 cases in each group. There were 14 males and 16 females in new type transverse process retractor group, the age was (68.0±4.3) years old on average; lesion segment of 8 cases were L3,4, 9 cases were L4,5, 13 cases were L5S1;5 cases of lumbar disc herniation, 20 cases of lumbar spinal stenosis, 5 cases of degenerative lumbar spondylolisthesis;new transverse process retractor was used to pedicle screw placement. While there were 15 males and 15 females in control group, with an average age of (69.2±4.5) years old;lesion segment of 8 cases were L3,4, 10 cases were L4,5, 12 cases were L5S1;5 cases of lumbar disc herniation, 21 cases of lumbar spinal stenosis, 4 cases of degenerative lumbar spondylolisthesis;the traditional lamina retractor was used for soft tissue pulling and finished pedicle screw placement by freehand. The length of surgical incision, the time required for inserting a single screw, fluoroscopy times, the times of adjusting the positioning needle or screw in insertion process, and the visual analogue scale (VAS) of surgical incision 72 hours after operation were compared between two groups.@*RESULTS@#Using CAD and 3D printing technology, a new type of transverse protrusion retractor was developed quickly. The length of surgical incision, the time required for inserting a single screw, fluoroscopy time, and the times of adjusting the positioning needle or screw in insertion process in new transverse process retractor group were less than those in control group(P<0.05). There was no significant difference in VAS of lumbar incision pain at 72 hours after operation between two groups(P>0.05).@*CONCLUSION@#Using CAD combined with 3D printing technology to develop a new transverse protrusion retractor has the advantages of convenient design, short development cycle and low cost. It provides a new idea for the research and development of new medical devices. The new transverse process retractor has the advantages of easy operation, reliable fixation, less damage to paravertebral muscle, convenient pedicle screw placement, reducing fluoroscopy time and so on.
Subject(s)
Aged , Female , Humans , Male , Middle Aged , Intervertebral Disc Displacement/surgery , Low Back Pain , Lumbar Vertebrae/surgery , Pedicle Screws , Printing, Three-Dimensional , Spinal Fusion , Spinal Stenosis/surgery , Spondylolisthesis/surgery , Surgical Wound , Treatment OutcomeABSTRACT
OBJECTIVE@#To observe clinical efficacy of chiropractic manipulation in the treatment of degenerative scoliosis (DS).@*METHODS@#From June 2017 to September 2019, 120 patients with degenerative scoliosis were randomly divided into treatment group (60 cases) and control group(60 cases). The patients in treatment group were treated with chiropractic manipulation once every other day for 4 weeks. The patients in control group were treated with eperisone hydrochloride tablets combined with thoracolumbar orthopedic(TSLO)brace, oral eperisone hydrochloride tablets 50 mg three times a day, wearing TSLO brace for not less than 8 hours a day. The course of treatment was 4 weeks. After the patients were selected into the group, visual analogue scale (VAS) and Oswestry Disability Index (ODI) were recorded before treatment, 1, 2, 3, 4 weeks after treatment and 1 month after treatment. The full length X-ray of the spine was taken before and 4 weeks after treatment, and the scoliosis Cobb angle, sagittal vertical axis (SVA) and lumbar lordosis (LL) were measured and compared. The adverse reactions during the treatment were recorded.@*RESULTS@#There were significant differences in VAS and ODI between two groups at each time point after treatment (P<0.001), VAS and ODI at 2 weeks after treatment (PVAS=0.025, PODI=0.032) and 3 weeks after treatment(PVAS=0.040, PODI=0.044) in treatment group were significantly different from those in control group, but there was no significant difference in VAS and ODI at other time points between treatment group and control group (P>0.05). There was significant difference in Cobb angle between treatment group(P=0.010) and control group(P=0.017) after treatment, but there was no significant difference in LL and SVA between treatment group and control group. There was no significant difference in Cobb angle, LL and SVA between two groups before and after treatment. During the treatment, there were 4 mild adverse reactions in the control group and no adverse reactions in the treatment group.@*CONCLUSION@#Chiropractic manipulation can effectively relieve pain and improve lumbar function in patients with degenerative scoliosis. The onset of action is faster than that oral eperisone hydrochloride tablets combined with TSLO brace, and it has better safety and can improve Cobb angle of patients with degenerative scoliosis.