Your browser doesn't support javascript.
loading
Show: 20 | 50 | 100
Results 1 - 20 de 27
Filter
1.
Article in English | WPRIM | ID: wpr-1010598

ABSTRACT

Magnesium-doped calcium silicate (CS) bioceramic scaffolds have unique advantages in mandibular defect repair; however, they lack antibacterial properties to cope with the complex oral microbiome. Herein, for the first time, the CS scaffold was functionally modified with a novel copper-containing polydopamine (PDA(Cu2+‍)) rapid deposition method, to construct internally modified (*P), externally modified (@PDA), and dually modified (*P@PDA) scaffolds. The morphology, degradation behavior, and mechanical properties of the obtained scaffolds were evaluated in vitro. The results showed that the CS*P@PDA had a unique micro-/nano-structural surface and appreciable mechanical resistance. During the prolonged immersion stage, the release of copper ions from the CS*P@PDA scaffolds was rapid in the early stage and exhibited long-term sustained release. The in vitro evaluation revealed that the release behavior of copper ions ascribed an excellent antibacterial effect to the CS*P@PDA, while the scaffolds retained good cytocompatibility with improved osteogenesis and angiogenesis effects. Finally, the PDA(Cu2+)-modified scaffolds showed effective early bone regeneration in a critical-size rabbit mandibular defect model. Overall, it was indicated that considerable antibacterial property along with the enhancement of alveolar bone regeneration can be imparted to the scaffold by the two-step PDA(Cu2+) modification, and the convenience and wide applicability of this technique make it a promising strategy to avoid bacterial infections on implants.


Subject(s)
Animals , Rabbits , Copper/pharmacology , Tissue Scaffolds/chemistry , Bone Regeneration , Anti-Bacterial Agents/pharmacology , Osteogenesis , Calcium , Ions/pharmacology
2.
Article in Chinese | WPRIM | ID: wpr-971272

ABSTRACT

OBJECTIVE@#To investigate the preparation of decellularized small intestinal submucosa (dSIS) sponge scaffolds with chelated strontium (Sr) ions at different pH values, and to select the appropriate pH values for synthesizing Sr/dSIS scaffolds using the physicochemical properties and biocompatibility of the scaffolds as evaluation indexes.@*METHODS@#(1) Sr/dSIS scaffolds preparation and grouping: After mixing dSIS solution and strontium chloride solution in equal volumes, adjusting pH of the solution to 3, 5, 7, and 9 respectively, porous scaffolds were prepared by freeze-drying method after full reaction at 37℃, which were named Sr/dSIS-3, -5, -7, and -9 respectively, and the dSIS scaffolds were used as the control group. (2) Physicochemical property evaluation: The bulk morphology of the scaffolds was observed in each group, the microscopic morphology analyzed by scanning electron microscopy, and the porosity and pore size determined, the surface elements analyzed by energy spectroscopy, the structure of functional groups analyzed by infrared spectroscopy, the chelation rate determined by atomic spectrophotometry, the water absorption rate detected by using specific gravity method, and the compression strength evaluated by universal mechanical testing machine.(3) Biocompatibility evaluation: The cytotoxicity and proliferative effect to bone mesenchymal stem cells (BMSCs) of each group were evaluated by Calcein-AM/PI double staining method.@*RESULTS@#Scanning electron microscopy showed that the scaffolds of each group had an interconnected three-dimensional porous structure with no statistical difference in pore size and porosity. Energy spectrum analysis showed that strontium could be detected in Sr/dSIS-5, -7 and -9 groups, and strontium was uniformly distributed in the scaffolds. Functional group analysis further supported the formation of chelates in the Sr/dSIS-5, -7 and -9 groups. Chelation rate analysis showed that the Sr/dSIS-7 group had the highest strontium chelation rate, which was statistically different from the other groups (P < 0.05). The scaffolds in all the groups had good water absorption. The scaffolds in Sr/dSIS-5, -7 and -9 groups showed significantly improved mechanical properties compared with the control group (P < 0.05). The scaffolds in all the groups had good biocompatibility, and the Sr/dSIS-7 group showed the best proliferation of BMSCs.@*CONCLUSION@#When pH was 7, the Sr/dSIS scaffolds showed the highest strontium chelation rate and the best proliferation effect of BMSCs, which was the ideal pH value for the preparation of the Sr/dSIS scaffolds.


Subject(s)
Tissue Scaffolds/chemistry , Biocompatible Materials , Strontium/pharmacology , Ions , Hydrogen-Ion Concentration , Tissue Engineering/methods , Porosity
3.
Article in English | WPRIM | ID: wpr-971379

ABSTRACT

Pulpitis, periodontitis, jaw bone defect, and temporomandibular joint damage are common oral and maxillofacial diseases in clinic, but traditional treatments are unable to restore the structure and function of the injured tissues. Due to their good biocompatibility, biodegradability, antioxidant effect, anti-inflammatory activity, and broad-spectrum antimicrobial property, chitosan-based hydrogels have shown broad applicable prospects in the field of oral tissue engineering. Quaternization, carboxymethylation, and sulfonation are common chemical modification strategies to improve the physicochemical properties and biological functions of chitosan-based hydrogels, while the construction of hydrogel composite systems via carrying porous microspheres or nanoparticles can achieve local sequential delivery of diverse drugs or bioactive factors, laying a solid foundation for the well-organized regeneration of defective tissues. Chemical cross-linking is commonly employed to fabricate irreversible permanent chitosan gels, and physical cross-linking enables the formation of reversible gel networks. Representing suitable scaffold biomaterials, several chitosan-based hydrogels transplanted with stem cells, growth factors or exosomes have been used in an attempt to regenerate oral soft and hard tissues. Currently, remarkable advances have been made in promoting the regeneration of pulp-dentin complex, cementum-periodontium-alveolar bone complex, jaw bone, and cartilage. However, the clinical translation of chitosan-based hydrogels still encounters multiple challenges. In future, more in vivo clinical exploration under the conditions of oral complex microenvironments should be performed, and the combined application of chitosan-based hydrogels and a variety of bioactive factors, biomaterials, and state-of-the-art biotechnologies can be pursued in order to realize multifaceted complete regeneration of oral tissue.


Subject(s)
Chitosan/chemistry , Tissue Engineering , Hydrogels/chemistry , Biocompatible Materials/chemistry , Cartilage , Tissue Scaffolds/chemistry
4.
Article in Chinese | WPRIM | ID: wpr-971510

ABSTRACT

OBJECTIVE@#The prepare decellularized extracellular matrix (ECM) scaffold materials derived from human cervical carcinoma tissues for 3D culture of cervical carcinoma cells.@*METHODS@#Fresh human cervical carcinoma tissues were treated with sodium lauryl ether sulfate (SLES) solution to prepare decellularized ECM scaffolds. The scaffolds were examined for ECM microstructure and residual contents of key ECM components (collagen, glycosaminoglycan, and elastin) and genetic materials by pathological staining and biochemical content analysis. In vitro 3D culture models were established by injecting cultured cervical cancer cells into the prepared ECM scaffolds. The cells in the recellularized scaffolds were compared with those in a conventional 2D culture system for cell behaviors including migration, proliferation and epithelial-mesenchymal transition (EMT) wsing HE staining, immunohistochemical staining and molecular biological technology analysis. Resistance to 5-fluorouracil (5-Fu) of the cells in the two culture systems was tested by analyzing the cell apoptosis rates via flow cytometry.@*RESULTS@#SLES treatment effectively removed cells and genetic materials from human cervical carcinoma tissues but well preserved the microenvironment structure and biological activity of ECM. Compared with the 2D culture system, the 3D culture models significantly promoted proliferation, migration, EMT and 5-Fu resistance of human cervical cancer cells.@*CONCLUSION@#The decellularized ECM scaffolds prepared using human cervical carcinoma tissues provide the basis for construction of in vitro 3D culture models for human cervical cancer cells.


Subject(s)
Female , Humans , Decellularized Extracellular Matrix , Extracellular Matrix , Uterine Cervical Neoplasms , Tissue Scaffolds/chemistry , Carcinoma , Fluorouracil/pharmacology , Tissue Engineering , Tumor Microenvironment
5.
Chinese Medical Journal ; (24): 2017-2027, 2023.
Article in English | WPRIM | ID: wpr-1007524

ABSTRACT

In the field of plastic and reconstructive surgery, the loss of organs or tissues caused by diseases or injuries has resulted in challenges, such as donor shortage and immunosuppression. In recent years, with the development of regenerative medicine, the decellularization-recellularization strategy seems to be a promising and attractive method to resolve these difficulties. The decellularized extracellular matrix contains no cells and genetic materials, while retaining the complex ultrastructure, and it can be used as a scaffold for cell seeding and subsequent transplantation, thereby promoting the regeneration of diseased or damaged tissues and organs. This review provided an overview of decellularization-recellularization technique, and mainly concentrated on the application of decellularization-recellularization technique in the field of plastic and reconstructive surgery, including the remodeling of skin, nose, ears, face, and limbs. Finally, we proposed the challenges in and the direction of future development of decellularization-recellularization technique in plastic surgery.


Subject(s)
Tissue Engineering/methods , Tissue Scaffolds/chemistry , Surgery, Plastic , Regenerative Medicine/methods , Extracellular Matrix
6.
Chinese Journal of Biotechnology ; (12): 3724-3737, 2023.
Article in Chinese | WPRIM | ID: wpr-1007988

ABSTRACT

Gelatin microspheres were discussed as a scaffold material for bone tissue engineering, with the advantages of its porosity, biodegradability, biocompatibility, and biosafety highlighted. This review discusses how bone regeneration is aided by the three fundamental components of bone tissue engineering-seed cells, bioactive substances, and scaffold materials-and how gelatin microspheres can be employed for in vitro seed cell cultivation to ensure efficient expansion. This review also points out that gelatin microspheres are advantageous as drug delivery systems because of their multifunctional nature, which slows drug release and improves overall effectiveness. Although gelatin microspheres are useful for bone tissue creation, the scaffolds that take into account their porous structure and mechanical characteristics might be difficult to be created. This review then discusses typical techniques for creating gelatin microspheres, their recent application in bone tissue engineering, as well as possible future research directions.


Subject(s)
Tissue Engineering/methods , Tissue Scaffolds/chemistry , Gelatin/chemistry , Microspheres , Bone and Bones , Porosity
7.
Article in Chinese | WPRIM | ID: wpr-1009061

ABSTRACT

OBJECTIVE@#To summarize the influence of microstructure on performance of triply-periodic minimal surface (TPMS) bone scaffolds.@*METHODS@#The relevant literature on the microstructure of TPMS bone scaffolds both domestically and internationally in recent years was widely reviewed, and the research progress in the imfluence of microstructure on the performance of bone scaffolds was summarized.@*RESULTS@#The microstructure characteristics of TPMS bone scaffolds, such as pore shape, porosity, pore size, curvature, specific surface area, and tortuosity, exert a profound influence on bone scaffold performance. By finely adjusting the above parameters, it becomes feasible to substantially optimize the structural mechanical characteristics of the scaffold, thereby effectively preempting the occurrence of stress shielding phenomena. Concurrently, the manipulation of these parameters can also optimize the scaffold's biological performance, facilitating cell adhesion, proliferation, and growth, while facilitating the ingrowth and permeation of bone tissue. Ultimately, the ideal bone fusion results will obtain.@*CONCLUSION@#The microstructure significantly and substantially influences the performance of TPMS bone scaffolds. By deeply exploring the characteristics of these microstructure effects on the performance of bone scaffolds, the design of bone scaffolds can be further optimized to better match specific implantation regions.


Subject(s)
Tissue Scaffolds/chemistry , Tissue Engineering/methods , Bone and Bones , Porosity
8.
Article in English | WPRIM | ID: wpr-1010574

ABSTRACT

Silk fibroin (SF) as a natural biopolymer has become a popular material for biomedical applications due to its minimal immunogenicity, tunable biodegradability, and high biocompatibility. Nowadays, various techniques have been developed for the applications of SF in bioengineering. Most of the literature reviews focus on the SF-based biomaterials and their different forms of applications such as films, hydrogels, and scaffolds. SF is also valuable as a coating on other substrate materials for biomedicine; however, there are few reviews related to SF-coated biomaterials. Thus, in this review, we focused on the surface modification of biomaterials using SF coatings, demonstrated their various preparation methods on substrate materials, and introduced the latest procedures. The diverse applications of SF coatings for biomedicine are discussed, including bone, ligament, skin, mucosa, and nerve regeneration, and dental implant surface modification. SF coating is conducive to inducing cell adhesion and migration, promoting hydroxyapatite (HA) deposition and matrix mineralization, and inhibiting the Notch signaling pathway, making it a promising strategy for bone regeneration. In addition, SF-coated composite scaffolds can be considered prospective candidates for ligament regeneration after injury. SF coating has been proven to enhance the mechanical properties of the substrate material, and render integral stability to the dressing material during the regeneration of skin and mucosa. Moreover, SF coating is a potential strategy to accelerate nerve regeneration due to its dielectric properties, mechanical flexibility, and angiogenesis promotion effect. In addition, SF coating is an effective and popular means for dental implant surface modification to promote osteogenesis around implants made of different materials. Thus, this review can be of great benefit for further improvements in SF-coated biomaterials, and will undoubtedly contribute to clinical transformation in the future.


Subject(s)
Biocompatible Materials/chemistry , Silk/chemistry , Fibroins/pharmacology , Dental Implants , Osteogenesis , Tissue Scaffolds/chemistry , Tissue Engineering/methods
9.
Article in Chinese | WPRIM | ID: wpr-982256

ABSTRACT

Soft tissue is an indispensable tissue in human body. It plays an important role in protecting the body from external physical, chemical or biological factors. Mild soft tissue injuries can self-heal, while severe soft tissue injuries may require related treatment. Natural polymers (such as chitosan, hyaluronic acid, and collagen) and synthetic polymers (such as polyethylene glycol and polylactic acid) exhibit good biocompatibility, biodegradability and low toxicity. It can be used for soft tissue repairs for antibacterial, hemostatic and wound healing purposes. Their related properties can be enhanced through modification or preparation of composite materials. Commonly used soft tissue repairs include wound dressings, biological patches, medical tissue adhesives, and tissue engineering scaffolds. This study introduces the properties, mechanisms of action and applications of various soft tissue repair medical materials, including chitosan, hyaluronic acid, collagen, polyethylene glycol and polylactic acid, and provides an outlook on the application prospects of soft tissue repair medical materials and products.


Subject(s)
Humans , Biocompatible Materials/chemistry , Chitosan/chemistry , Hyaluronic Acid , Tissue Scaffolds/chemistry , Collagen/chemistry , Polymers/chemistry , Polyethylene Glycols , Soft Tissue Injuries
10.
Article in English | WPRIM | ID: wpr-929039

ABSTRACT

Carbon nanotube (CNT) composite materials are very attractive for use in neural tissue engineering and biosensor coatings. CNT scaffolds are excellent mimics of extracellular matrix due to their hydrophilicity, viscosity, and biocompatibility. CNTs can also impart conductivity to other insulating materials, improve mechanical stability, guide neuronal cell behavior, and trigger axon regeneration. The performance of chitosan (CS)/polyethylene glycol (PEG) composite scaffolds could be optimized by introducing multi-walled CNTs (MWCNTs). CS/PEG/CNT composite scaffolds with CNT content of 1%, 3%, and 5% (1%=0.01 g/mL) were prepared by freeze-drying. Their physical and chemical properties and biocompatibility were evaluated. Scanning electron microscopy (SEM) showed that the composite scaffolds had a highly connected porous structure. Transmission electron microscope (TEM) and Raman spectroscopy proved that the CNTs were well dispersed in the CS/PEG matrix and combined with the CS/PEG nanofiber bundles. MWCNTs enhanced the elastic modulus of the scaffold. The porosity of the scaffolds ranged from 83% to 96%. They reached a stable water swelling state within 24 h, and swelling decreased with increasing MWCNT concentration. The electrical conductivity and cell adhesion rate of the scaffolds increased with increasing MWCNT content. Immunofluorescence showed that rat pheochromocytoma (PC12) cells grown in the scaffolds had characteristics similar to nerve cells. We measured changes in the expression of nerve cell markers by quantitative real-time polymerase chain reaction (qRT-PCR), and found that PC12 cells cultured in the scaffolds expressed growth-associated protein 43 (GAP43), nerve growth factor receptor (NGFR), and class III β‍-tubulin (TUBB3) proteins. Preliminary research showed that the prepared CS/PEG/CNT scaffold has good biocompatibility and can be further applied to neural tissue engineering research.


Subject(s)
Animals , Rats , Axons , Biocompatible Materials/chemistry , Chitosan/chemistry , Nanotubes, Carbon/chemistry , Nerve Regeneration , Polyethylene Glycols , Porosity , Tissue Engineering/methods , Tissue Scaffolds/chemistry
11.
Frontiers of Medicine ; (4): 56-82, 2022.
Article in English | WPRIM | ID: wpr-929195

ABSTRACT

Contributing to organ formation and tissue regeneration, extracellular matrix (ECM) constituents provide tissue with three-dimensional (3D) structural integrity and cellular-function regulation. Containing the crucial traits of the cellular microenvironment, ECM substitutes mediate cell-matrix interactions to prompt stem-cell proliferation and differentiation for 3D organoid construction in vitro or tissue regeneration in vivo. However, these ECMs are often applied generically and have yet to be extensively developed for specific cell types in 3D cultures. Cultured cells also produce rich ECM, particularly stromal cells. Cellular ECM improves 3D culture development in vitro and tissue remodeling during wound healing after implantation into the host as well. Gaining better insight into ECM derived from either tissue or cells that regulate 3D tissue reconstruction or organ regeneration helps us to select, produce, and implant the most suitable ECM and thus promote 3D organoid culture and tissue remodeling for in vivo regeneration. Overall, the decellularization methodologies and tissue/cell-derived ECM as scaffolds or cellular-growth supplements used in cell propagation and differentiation for 3D tissue culture in vitro are discussed. Moreover, current preclinical applications by which ECM components modulate the wound-healing process are reviewed.


Subject(s)
Humans , Cell Differentiation , Cell Proliferation , Decellularized Extracellular Matrix , Extracellular Matrix/metabolism , Mesenchymal Stem Cells , Tissue Engineering/methods , Tissue Scaffolds/chemistry
12.
Frontiers of Medicine ; (4): 358-377, 2022.
Article in English | WPRIM | ID: wpr-939883

ABSTRACT

According to literature, certain microorganism productions mediate biological effects. However, their beneficial characteristics remain unclear. Nowadays, scientists concentrate on obtaining natural materials from live creatures as new sources to produce innovative smart biomaterials for increasing tissue reconstruction in tissue engineering and regenerative medicine. The present review aims to introduce microorganism-derived biological macromolecules, such as pullulan, alginate, dextran, curdlan, and hyaluronic acid, and their available sources for tissue engineering. Growing evidence indicates that these materials can be used as biological material in scaffolds to enhance regeneration in damaged tissues and contribute to cosmetic and dermatological applications. These natural-based materials are attractive in pharmaceutical, regenerative medicine, and biomedical applications. This study provides a detailed overview of natural-based biomaterials, their chemical and physical properties, and new directions for future research and therapeutic applications.


Subject(s)
Humans , Biocompatible Materials/chemistry , Hyaluronic Acid , Regenerative Medicine , Tissue Engineering , Tissue Scaffolds/chemistry
13.
Chinese Journal of Biotechnology ; (12): 925-942, 2022.
Article in Chinese | WPRIM | ID: wpr-927755

ABSTRACT

Cartilage has poor self-recovery because of its characteristics of no blood vessels and high extracellular matrix. In clinical treatment, physical therapy or drug therapy is usually used for mild cartilage defects, and surgical treatment is needed for severe ones. In recent years, cartilage tissue engineering technology provides a new way for the treatment of cartilage defects. Compared with the traditional surgical treatment, cartilage tissue engineering technology has the advantages of small wound and good recovery. The application of microcarrier technology in the design of tissue engineering scaffolds further expands the function of scaffolds and promotes cartilage regeneration. This review summarized the main preparation methods and development of microcarrier technology in recent years. Subsequently, the properties and specific application scenarios of microcarriers with different materials and functions were introduced according to the materials and functions of microcarriers used in cartilage repair. Based on our research on osteochondral integrated layered scaffolds, we proposed an idea of optimizing the performance of layered scaffolds through microcarriers, which is expected to prepare bionic scaffolds that are more suitable for the structural characteristics of natural cartilage.


Subject(s)
Cartilage , Extracellular Matrix/chemistry , Technology , Tissue Engineering/methods , Tissue Scaffolds/chemistry
14.
Article in Chinese | WPRIM | ID: wpr-941002

ABSTRACT

OBJECTIVE@#To compare the effects of three different crosslinkers on the biocompatibility, physical and chemical properties of decellularized small intestinal submucosa (SIS) porous scaffolds.@*METHODS@#The SIS porous scaffolds were prepared by freeze-drying method and randomly divided into three groups, then crosslinked by glutaraldehyde (GA), 1-ethyl-3-(3-dimethylaminopropyl) carbodi-imide (EDC) and procyanidine (PA) respectively. To evaluate the physicochemical property of each sample in different groups, the following experiments were conducted. Macroscopic morphologies were observed and recorded. Microscopic morphologies of the scaffolds were observed using field emission scanning electron microscope (FESEM) and representative images were selected. Computer software (ImageJ) was used to calculate the pore size and porosity. The degree of crosslinking was determined by ninhydrin experiment. Collagenase degradation experiment was performed to assess the resistance of SIS scaffolds to enzyme degradation. To evaluate the mechanical properties, universal mechanical testing machine was used to determine the stress-strain curve and compression strength was calculated. Human bone marrow mesenchymal cells (hBMSCs) were cultured on the scaffolds after which cytotoxicity and cell proliferation were assessed.@*RESULTS@#All the scaffolds remained intact after different crosslinking treatments. The FESEM images showed uniformed interconnected micro structures of scaffolds in different groups. The pore size of EDC group[(161.90±13.44) μm] was significantly higher than GA group [(149.50±14.65) μm] and PA group[(140.10±12.06) μm] (P < 0.05). The porosity of PA group (79.62%±1.14%) was significantly lower than EDC group (85.11%±1.71%) and GA group (84.83%±1.89%) (P < 0.05). PA group showed the highest degree of crosslinking whereas the lowest swelling ratio. There was a significant difference in the swelling ratio of the three groups (P < 0.05). Regarding to the collagenase degradation experiment, the scaffolds in PA group showed a significantly lower weight loss rate than the other groups after 7 days degradation. The weight loss rates of GA group were significantly higher than those of the other groups on day 15, whereas the PA group had the lowest rate after 10 days and 15 days degradation. PA group showed better mechanical properties than the other two groups. More living cells could be seen in PA and EDC groups after live/dead cell staining. Additionally, the proliferation rate of hBMCSs was faster in PA and EDC groups than in GA group.@*CONCLUSION@#The scaffolds gained satisfying degree of crosslinking after three different crosslinking treatments. The samples after PA and EDC treatment had better physicochemical properties and biocompatibility compared with GA treatment. Crosslinking can be used as a promising and applicable method in the modification of SIS scaffolds.


Subject(s)
Humans , Biocompatible Materials/chemistry , Cross-Linking Reagents/chemistry , Porosity , Tissue Engineering/methods , Tissue Scaffolds/chemistry , Weight Loss
15.
Int. j. morphol ; 38(4): 909-913, Aug. 2020. tab, graf
Article in English | LILACS | ID: biblio-1124875

ABSTRACT

Porous titanium alloy scaffold was widely used in treating bone defect caused by traumatic injury and osteomyelitis, which was incapable of self-healing. The implantation of scaffold produced stress shielding thereby forming osteolysis. The objective of this study was to analysis trabecular morphological features of osseointegrated bone. 14 New Zealand rabbits were divided into two groups, surgery group and healthy control group. 7 rabbits in surgery group were selected to perform 3D printed porous titanium alloy scaffold implantation surgery with preload at the defect of femoral condyle for osseointegration. The other 7 rabbits in control group were feed free. After 90 days healing, femoral condyles were extracted to perform micro-CT scanning with hydroxyapatite calibration phantom. Mean bone mineral density (BMD), bone volume fraction (BV/TV), BS/TV (bone surface area ratio), Tb.Th (thickness of trabeculae), Tb.N (number of trabeculae), Tb.Sp (trabecular separation) and DA (degree of anisotropy) were calculated from micro-CT images. The results revealed that osseointegration inside and at the surface of scaffolds worked well from grey values of micro-CT images. After 12 weeks healing, mean bone mineral densities (BMD) in surgery group and healthy control group were calculated as 800±20mg/cm3 and 980±90mg/cm3, respectively. This revealed that the strength of trabeculae in surgery group might lower than that in the healthy group. Trabecular morphological parameters test showed that trabecular morphological parameters at the surface of scaffolds in the surgery group deteriorated significantly. It was found from micro-CT images that ingrowth bone was filled with pores of scaffold. Overall, the effect of osseointegration was promoted through the change of mechanical micro-environment in the scaffold region. Overall, preload could improve osseointegration effect in the long-term after surgery. However, the trabecular morphology in the surgery group was deteriorated, which might bring secondary fracture risk again.


La malla de aleación de titanio poroso se usó ampliamente en el tratamiento de defectos óseos causados por lesiones traumáticas y osteomielitis. El implante de la malla generó una protección contra el estrés, formando así osteolisis. El objetivo de este estudio fue analizar las características morfológicas trabeculares del hueso osteointegrado. Se dividieron 14 conejos (Neozelandeses) en dos grupos, grupo cirugía y grupo control saludable. Se seleccionaron 7 conejos en el grupo de cirugía para realizar una implantación de mallas de aleación de titanio poroso, impresas en 3D con precarga en el defecto del cóndilo femoral para la osteointegración. Los 7 conejos restantes del grupo control se mantuvieron sin alimentación. Después de 90 días de curación, se extrajeron los cóndilos femorales para realizar una exploración por micro-CT con un espectro de calibración de hidroxiapatita. Se calcularon a partir de imágenes de micro-CTDensidad mineral ósea media (DMO), fracción de volumen óseo (BV / TV), BS / TV (relación de área de superficie ósea), Tb.Th (espesor de trabéculas), Tb.N (número de trabéculas), Tb.Sp (trabecular separación) y DA (grado de anisotropía). Los resultados revelaron que la osteointegración dentro y en la superficie de los andamios funcionó bien a partir de los valores grises de las imágenes de micro-CT. Después de 12 semanas de curación, las densidades medias de minerales óseos (DMO) en el grupo cirugía y en el grupo control sano se calcularon como 800 ± 20 mg/cm3 y 980 ± 90 mg/cm3, respectivamente. Esto reveló que la fuerza de las trabéculas en el grupo de cirugía podría ser menor que la del grupo sano. La prueba de parámetros morfológicos trabeculares mostró que en el grupo de cirugía, la superficie de las mallas, se deterioraron significativamente. Se descubrió a partir de imágenes de microCT que el hueso en crecimiento estaba lleno de poros de andamio. En general, el efecto de la osteointegración se promovió mediante el cambio del microambiente mecánico en la región de la malla. En general, la precarga podría mejorar el efecto de osteointegración a largo plazo después de la cirugía. Sin embargo, la morfología trabecular en el grupo de cirugía se deterioró, lo que podría traer un nuevo riesgo de fractura secundaria.


Subject(s)
Animals , Rabbits , Bone Diseases/surgery , Osseointegration/physiology , Tissue Scaffolds/chemistry , Printing, Three-Dimensional , Prostheses and Implants , Titanium/chemistry , Porosity , Alloys , X-Ray Microtomography , Femur/surgery
16.
Rev. bras. pesqui. méd. biol ; Braz. j. med. biol. res;52(8): e8318, 2019. tab, graf
Article in English | LILACS | ID: biblio-1011603

ABSTRACT

Currently, there is great clinical need for suitable synthetic grafts that can be used in vascular diseases. Synthetic grafts have been successfully used in medium and large arteries, however, their use in small diameter vessels is limited and presents a high failure rate. In this context, the aim of this study was to develop tissue engineering scaffolds, using poly(trimethylene carbonate-co-L-lactide) (PTMCLLA), for application as small diameter vascular grafts. For this, copolymers with varying trimethylene carbonate/lactide ratios - 20/80, 30/70, and 40/60 - were submitted to electrospinning and the resulting scaffolds were evaluated in terms of their physicochemical and biological properties. The scaffolds produced with PTMCLLA 20/80, 30/70, and 40/60 showed smooth fibers with an average diameter of 771±273, 606±242, and 697±232 nm, respectively. When the degradation ratio was evaluated, the three scaffold groups had a similar molecular weight (Mw) on the final day of analysis. PTMCLLA 30/70 and 40/60 scaffolds exhibited greater flexibility than the PTMCLLA 20/80. However, the PTMCLLA 40/60 scaffolds showed a large wrinkling and their biological properties were not evaluated. The PTMCLLA 30/70 scaffolds supported the adhesion and growth of mesenchymal stem cells (MSCs), endothelial progenitor cells, and smooth muscle cells (SMCs). In addition, they provided a spreading of MSCs and SMCs. Given the results, the electrospun scaffolds produced with PTMCLLA 30/70 copolymer can be considered promising candidates for future applications in vascular tissue engineering.


Subject(s)
Humans , Polyesters/chemistry , Blood Vessel Prosthesis , Dioxanes/chemistry , Tissue Scaffolds/chemistry , Materials Testing , Cells, Cultured/cytology , Myocytes, Smooth Muscle/cytology , Cell Proliferation , Mesenchymal Stem Cells/cytology , Endothelial Progenitor Cells/cytology
17.
J. appl. oral sci ; J. appl. oral sci;24(1): 76-84, Jan.-Feb. 2016. graf
Article in English | LILACS, BBO | ID: lil-777354

ABSTRACT

ABSTRACT Objective The purpose of this study was to investigate the biological effects of epicatechin (ECN), a crosslinking agent, on human dental pulp cells (hDPCs) cultured in collagen scaffolds. Material and Method To evaluate the effects of ECN on the proliferation of hDPCs, cell counting was performed using optical and fluorescent microscopy. Measurements of alkaline phosphatase (ALP) activity, alizarin red staining, and real-time polymerase chain reactions were performed to assess odontogenic differentiation. The compressive strength and setting time of collagen scaffolds containing ECN were measured. Differential scanning calorimetry was performed to analyze the thermal behavior of collagen in the presence of ECN. Results Epicatechin increased ALP activity, mineralized nodule formation, and the mRNA expression of dentin sialophosphoprotein (DSPP), a specific odontogenic-related marker. Furthermore, ECN upregulated the expression of DSPP in hDPCs cultured in collagen scaffolds. Epicatechin activated the extracellular signal-regulated kinase (ERK) and the treatment with an ERK inhibitor (U0126) blocked the expression of DSPP. The compressive strength was increased and the setting time was shortened in a dose-dependent manner. The number of cells cultured in the ECN-treated collagen scaffolds was significantly increased compared to the cells in the untreated control group. Conclusions Our results revealed that ECN promoted the proliferation and differentiation of hDPCs. Furthermore, the differentiation was regulated by the ERK signaling pathway. Changes in mechanical properties are related to cell fate, including proliferation and differentiation. Therefore, our study suggests the ECN treatment might be desirable for dentin-pulp complex regeneration.


Subject(s)
Humans , Catechin/pharmacology , Collagen/pharmacology , Cross-Linking Reagents/pharmacology , Dental Pulp/cytology , Dental Pulp/drug effects , Tissue Scaffolds/chemistry , Time Factors , Calorimetry, Differential Scanning , Gene Expression , Cell Differentiation/drug effects , Cell Survival/drug effects , Cells, Cultured , Blotting, Western , Reproducibility of Results , Analysis of Variance , Extracellular Signal-Regulated MAP Kinases/analysis , Cell Proliferation/drug effects , Alkaline Phosphatase/analysis , Real-Time Polymerase Chain Reaction
18.
Braz. oral res. (Online) ; 30(1): e120, 2016. tab, graf
Article in English | LILACS | ID: biblio-951977

ABSTRACT

Abstract This study was designed to determine the in vivo performance of three different materials as scaffolds for dental pulp stem cells (DPSC) undergoing induced odontogenic differentiation. An odontogenic medium modified by the addition of recombinant human bone morphogenetic protein 2 was used in the experimental groups to induce differentiation. Mesenchymal stem cell medium was used in the control groups. DPSC were transplanted onto the backs of mice via three scaffolds: copolymer of L-lactide and DL-lactide (PLDL), copolymer of DL-lactide (PDL) and hydroxyapatite tricalcium phosphate (HA/TCP). The expression levels of dentin sialo-phosphoprotein (DSPP), dentin matrix protein-1 (DMP1), enamelysin/matrix metalloproteinase 20 (MMP20) and phosphate-regulating gene with homologies to endopeptidases on X chromosome (PHEX) were analysed using RT-PCR. The expressions in the experimental groups were compared to those in the control groups. The transcript expressions at 6 and 12 weeks were significantly different for all scaffolds (p < 0.05), except for the expression of DSPP in the PLDL group with regard to the time variable. Although there was a decrease in the expression of enamelysin/MMP20 in PLDL and HA/TCP at 12 weeks, all other expressions increased and reached their highest level at 12 weeks. The highest DSPP expression was in the PDL group (p < 0.05). The highest expression of DMP1 was detected in the HA/TCP group (p < 0.05). The highest expression of PHEX was in the PLDL group (p < 0.05). Consequently, PLDL and PDL seemed to be promising scaffold candidates for odontogenic regeneration at least as HA-TCP, when they were applied with the DPSC induced for odontogenic differentiation.


Subject(s)
Humans , Animals , Polymers/chemistry , Stem Cells/physiology , Cell Differentiation/physiology , Dental Pulp/cytology , Tissue Scaffolds/chemistry , Phosphoproteins/analysis , Sialoglycoproteins/analysis , Time Factors , Biocompatible Materials/chemistry , Calcium Phosphates/chemistry , Gene Expression , Reproducibility of Results , Extracellular Matrix Proteins/analysis , Durapatite/chemistry , Cell Culture Techniques , Dental Enamel/chemistry , Dentin/chemistry , Dioxanes/chemistry , Matrix Metalloproteinase 20/analysis , PHEX Phosphate Regulating Neutral Endopeptidase/analysis
19.
Braz. dent. j ; Braz. dent. j;26(2): 93-98, Mar-Apr/2015. tab, graf
Article in English | LILACS | ID: lil-741212

ABSTRACT

The aim of this study was to evaluate the influence of the poly-L-lactic acid (PLLA)-based scaffold's pore size on the proliferation and differentiation of dental pulp stem cells (DPSCs). The scaffolds were prepared in pulp chambers of 1-mm-thick tooth slices from third molars using salt crystals (150-250 µm or 251-450 µm) as porogen. DPSC (1x105 cells) were seeded in the scaffolds with different pore sizes, and cultured in 24-well plates. The cell proliferation was evaluated using the WST-1 assay after 3-21 days. Furthermore, RT-PCR was used to assess the differentiation of the DPSCs into odontoblasts, using markers of odontoblastic differentiation (DSPP, DSP-1 and MEPE). RNA from human odontoblasts was used as control. Cell proliferation rate was similar in both scaffolds except at the 14th day period, in which the cells seeded in the scaffolds with larger pores showed higher proliferation (p<0.05). After 21 days DPSCs seeded in both evaluated scaffolds were able of expressing odontoblastic markers DMP-1, DSPP and MEPE. In summary, both scaffolds tested in this study allowed the proliferation and differentiation of DPSCs into odontoblast-like cells.


O objetivo desse estudo foi avaliar a influência do tamanho dos poros de um scaffold à base de poli ácido láctico (PLLA) sobre a proliferação e diferenciação de células tronco da polpa dental (dental pulp stem cells - DPSC). Os scaffolds foram preparados dentro da câmara pulpar de discos de terceiros molares (1 mm), utilizando sal como porógeno (150-250 µm ou 251-450 µm). DPSC (1x105 células) foram semeadas nos scaffolds com diferentes tamanhos de poros e cultivadas em placas de 24 poços. A proliferação celular foi avaliada utilizando WST-1 após 3-21 dias. Além disso, RT-PCR foi utilizado para avaliar a diferenciação odontoblástica das DPSC utilizando marcadores da diferenciação odontoblástica (DSPP, DMP-1 e MEPE). RNA obtido de odontoblastos humanos foi utilizado como controle. A taxa de proliferação celular foi semelhante nos dois scaffolds avaliados, exceto no 14° dia, no qual as células cultivadas nos scaffolds com os maiores poros apresentaram uma maior taxa de proliferação (p<0,05). Após 21 dias, as DSPC cultivadas em ambos scaffolds avaliados foram capazes de expressar os marcadores odontoblásticos DMP-1, DSPP e MEPE. Em resumo, ambos scaffolds avaliados nesse estudo permitiram a proliferação e diferenciação odontoblástica das DPSC. .


Subject(s)
Dental Pulp/cytology , Polyesters/chemistry , Stem Cells/physiology , Tissue Scaffolds/chemistry , Biocompatible Materials/chemistry , Cell Differentiation , Cell Proliferation , Dental Pulp Cavity/anatomy & histology , Molar, Third , Real-Time Polymerase Chain Reaction , Surface Properties , Tissue Culture Techniques , Tissue Engineering
20.
Article in English | WPRIM | ID: wpr-164160

ABSTRACT

We conducted this study to investigate the synergistic effect of human urine-derived stem cells (USCs) and surface modified composite scaffold for bladder reconstruction in a rat model. The composite scaffold (Polycaprolactone/Pluronic F127/3 wt% bladder submucosa matrix) was fabricated using an immersion precipitation method, and heparin was immobilized on the surface via covalent conjugation. Basic fibroblast growth factor (bFGF) was loaded onto the heparin-immobilized scaffold by a simple dipping method. In maximal bladder capacity and compliance analysis at 8 weeks post operation, the USCs-scaffold(heparin-bFGF) group showed significant functional improvement (2.34 ± 0.25 mL and 55.09 ± 11.81 microL/cm H2O) compared to the other groups (2.60 ± 0.23 mL and 56.14 ± 9.00 microL/cm H2O for the control group, 1.46 ± 0.18 mL and 34.27 ± 4.42 microL/cm H2O for the partial cystectomy group, 1.76 ± 0.22 mL and 35.62 ± 6.69 microL/cm H2O for the scaffold group, and 1.92 ± 0.29 mL and 40.74 ± 7.88 microL/cm H2O for the scaffold(heparin-bFGF) group, respectively). In histological and immunohistochemical analysis, the USC-scaffold(heparin-bFGF) group showed pronounced, well-differentiated, and organized smooth muscle bundle formation, a multi-layered and pan-cytokeratin-positive urothelium, and high condensation of submucosal area. The USCs seeded scaffold(heparin-bFGF) exhibits significantly increased bladder capacity, compliance, regeneration of smooth muscle tissue, multi-layered urothelium, and condensed submucosa layers at the in vivo study.


Subject(s)
Animals , Humans , Rats , Adult Stem Cells/cytology , Biocompatible Materials/chemistry , Cell Differentiation , Fibroblast Growth Factor 2/administration & dosage , Heparin/administration & dosage , Materials Testing , Models, Animal , Poloxamer , Polyesters , Plastic Surgery Procedures , Regeneration , Tissue Engineering/methods , Tissue Scaffolds/chemistry , Urinary Bladder/anatomy & histology , Urine/cytology
SELECTION OF CITATIONS
SEARCH DETAIL