RESUMEN
La radiografía de tórax sigue siendo fundamental para la evaluación de patologías torácicas en lactantes. Antes de iniciar su interpretación, muchos autores sugieren revisar la técnica radiológica, ya que a esta edad se presentan varias particularidades técnicas que deben tenerse en cuenta para evitar errores interpretativos y no confundir hallazgos técnicos con patologías. Entre estas particularidades técnicas se deben evaluar: el centraje transversal o rotación, el centraje longitudinal o posición lordótica, el grado de inspiración, la posición de la vía aérea superior, la penetración o exposición de la radiografía, tipos de proyecciones y el movimiento. El objetivo de esta revisión es comentar y ejemplificar las peculiaridades técnicas que presenta la radiografía de tórax en lactantes y que pueden llevar a interpretaciones erróneas.
The chest X-ray remains essential for evaluating thoracic pathology in infants. Before beginning its interpretation, many authors recommend assessing the radiographic technique, as several technical peculiarities must be considered at this age to avoid interpretive errors and prevent mistaking technical artifacts for pathology. The technical aspects to be evaluated include transverse centering or rotation, longitudinal centering or lordotic position, degree of inspiration, upper airway positioning, radiograph penetration or exposure, projection types, and movement. The objective of this review is to discuss and illustrate the technical peculiarities of infant chest X-rays that can lead to erroneous interpretations.
Asunto(s)
Humanos , Lactante , Enfermedades Torácicas/diagnóstico por imagen , Radiografía Torácica , Errores Diagnósticos , Rotación , Posicionamiento del PacienteRESUMEN
La clase II esqueletal puede deberse a una mandíbula retruida, un maxilar protruido o una combinación de ambas, dando como resultado un perfil convexo en el paciente. Actualmente existen diferentes alternativas de tratamiento siendo una de ellas la extracción de primeros premolares para mejorar el perfil. El uso de microimplantes es una mecánica de anclaje absoluto que permite la retracción y cierre de espacios de los dientes. Se presenta un caso clínico de una paciente femenina de 19 años, clase II esqueletal por postero-rotación mandibular con biotipo dolicofacial, perfil convexo, sonrisa gingival, clase I molar y canina, overbite de 2 mm y overjet de 2 mm, apiñamiento moderado con incisivos superiores e inferiores protruidos y proinclinados. Como objetivo del tratamiento se planteó mantener la clase I molar y canina, mejorar el perfil facial y liberar el apiñamiento. Mediante el anclaje absoluto con los microimplantes interradiculares, se logró retraer el segmento antero-superior, conservando la clase I molar, clase I canina y reduciendo la proyección labial mejorando el perfil facial. Concluyendo que el uso de microimplantes resulta ser una mecánica de anclaje esqueletal cómoda, práctica y estable para lograr los objetivos del tratamiento sin la necesidad de la cooperación del paciente.
Class II can be due to a retrognathous mandible, a prognathous maxilla, or a combination of both, resulting in a convex profile in the patient. Currently there are different treatment alternatives, one of which is the extraction of first premolars to improve the profile. The use of microimplants is an absolute anchorage mechanics that allows the retraction and closing spaces of the teeth. A clinical case of a 19-year-old female patient, skeletal class II due to mandibular postero-rotation with dolichofacial biotype, convex profile, gummy smile, molar and canine class I, 2 mm overbite and 2 mm overjet, moderate crowding with upper and lower incisors protruding and proclining, as treatment objectives we must maintain molar and canine class I, improve facial profile and releive the crowding. Through absolute anchorage with interradicular microimplants, it was possible to retract the upper anterior segment, preserving molar class I, canine class I and reducing labial projection, improving facial profile. Concluding that the use of microim-plants turns out to be a comfortable, practical and stable skeletal anchorage mechanism to achieve the treatment objectives without the need for the patient's cooperation.
RESUMEN
Objective To investigate the efficacies of proximal femoral nail anti-rotation(PFNA)internal fixation in traction bed supine position and non-traction bed lateral position in the treatment of elderly unstable femoral intertrochanteric fractures.Methods The clinical data of patients with unstable femoral intertrochanteric fractures treated with PFNA internal fixation in our hospital were retrospec-tively analyzed,41 patients received treatment in traction bed supine position were included in the supine position group,and 55 patients treated received treatment in non-traction bed lateral position were included in the lateral position group.The perioperative related indicators,surgical reduction,hip Harris score,and incidence of complications in the two groups were analyzed.Results The operation time and incision length of patients in the lateral position group were shorter than those in the supine position group,and the intraoperative blood loss and fluoroscopy times were less than those in the supine position group,with statistically significant differences(P<0.05).There was no significant difference in the anesthesia mode,blood transfusion or hospital stay of patients between the two groups(P>0.05).There was no significant difference in the incidence of postoperative complications of patients between the two groups(P>0.05).There was no significant difference in neck-shaft angle,tip-apex distance or hip Harris score of patients between the two groups(P>0.05).Conclusion PFNA internal fixation in traction bed supine position and non-traction bed lateral position have the same effect in the treatment of elderly unstable femoral intertrochanteric fractures,while the non-traction bed lateral position for treatment has more advantages in shortening operation time,decreasing intraoperative blood loss,and reducing radiation exposure.
RESUMEN
Objective:To explore the optimal index of rotational displacement of femoral neck fractures by modeling the axial rotational displacement of femoral neck fractures after reduction and based on X-ray projections.Methods:Six dry human femur specimens, comprising 2 males and 4 females, were utilized in the study. Design and manufacture a proximal femur ortholateral and oblique X-ray casting jigs and mounts. The femoral neck fracture was modeled on the femoral specimen, with Pauwells 30°, 50°, and 70° models (2 each) made according to Pauwells typing. The fractures were manually repositioned with residual anterior 20°, 40° and 60° axial rotational displacements. Each fracture model was projected at different angles (pedicled 40°, pedicled 20°, vertical 0°, cephalad 20°, and cephalad 40°), and the trabecular angle and Garden's alignment index of the model were measured to observe the imaging characteristics of the fracture line on the medial oblique and lateral oblique radiographs.Results:In the presence of a 20° and 40° anterior rotational displacement following reduction of a femoral neck fracture, the trabecular angle in the rotationally displaced group was not significantly different from that of the anatomically repositioned group in various projection positions. However, when a residual rotational displacement of 60° was present, the trabeculae appeared blurred at most projection angles in the Pauwells 30° and 50° models, failing to measure trabecular angles. In the Pauwells 70° fracture model, the trabecular angle in the rotational displacement group was significantly different from that in the anatomical reduction group. In anteroposterior radiographs, when the anterior rotation displacement was 60° in the Pauwells 70° group, Garden's contralateral index showed an unsatisfactory restoration (150°, 142°), whereas all rotationally displaced models in the Pauwells 30° and Pauwells 50° groups had a Garden's contralateral index of >155°, which achieved an acceptable restoration. In lateral radiographs, all rotational displacement models with Garden's alignment index>180° failed to achieve acceptable repositioning, and the larger the Pauwells angle the greater the Garden's alignment index at the same rotational displacement. In the internal oblique position with a bias towards the foot side, the image showed partial overlap between the femoral head and the shaft, making it difficult to assess the quality of the reduction. Conversely, when projected cephalad, the femoral neck appeared longer, particularly at a projection angle of 40° cephalad, allowing for clear observation of the fracture line and the anatomy of the proximal femur. The trabeculae were not well visualized in the external oblique position.Conclusion:There are limitations in applying the trabecular angle to assess the axial rotational displacement of the femoral head after reduction of femoral neck fractures. The Pauwells 70° with residual rotational anterior displacement of 60° was the only way to detect axial rotational displacement of the femoral head on anteroposterior radiographs Garden's alignment index. For the determination of axial rotational displacement of the femoral head, the Garden's alignment index on lateral radiographs provides higher reliability.
RESUMEN
BACKGROUND:Among the pathogenic factors of cervical spondylosis,herniation of the intervertebral disc,dislocation of the facet joint and the stenosis of the intervertebral foramen are important factors leading to symptoms in patients.Moreover,inappropriate manipulation may aggravate the possibility of cervical disc rupture,leading to exacerbation of symptoms in patients. OBJECTIVE:To compare the effect between sagittal cervical manipulation and traditional cervical rotation manipulation on the area of the intervertebral disc,facet joint and intervertebral foramen at the operative segment by the finite element analysis. METHODS:The neck CT data of a male volunteer with a normal neck were selected and imported into Mimics 17.0 three-dimensional reconstruction software.Geo-magic Studio 12.0,Solidworks 2017 and Ansys Workbench 17.0 software were used for the construction of the finite element model of cervical vertebrae(C3-6)including intervertebral disc and articular cartilage.The lower end plate of the C5 vertebral body was fixed.A uniformly distributed vertical downward 50 N load was applied on the upper surface of the upper vertebral body(C3).The stress,deformation and deformation direction of the C4-5 intervertebral disc,joint capsule stress,the displacement of facet joints and the area of bilateral intervertebral foramen were compared between sagittal cervical manipulation and traditional rotation reduction. RESULTS AND CONCLUSION:(1)When using the rotation technique,the maximum normal equivalent stress(von Mises stress)of the C4-5 disc was 8.06 MPa;the total deformation was 1.05 mm,and the fiber ring expanded to the left and outside.When using the sagittal tip lifting technique,the maximum normal equivalent stress(von Mises stress)of the C4-5 disc was 2.60 MPa;the total deformation was 0.90 mm,and the fiber ring expanded to the left and back.Compared with the rotation technique,the pressure of the cervical manipulation technique on the disc was less(about 32.3%of the rotation technique),and the deformation degree of the disc was also light(about 85.7%of the rotation technique).(2)When the rotation technique was used,the maximum stresses of the left and right articular capsule ligaments were 0.37 MPa and 1.69 MPa,respectively.The overall displacement of the facet joint was 2.21 mm.The area of the right intervertebral foramen decreased by about 3.8%and the area of the left intervertebral foramen increased by about 0.9%.When the sagittal end lifting manipulation was performed,the maximum stresses of the left and right articular capsule ligaments were 0.27 MPa and 1.70 MPa,respectively;the overall displacement of the facet joint was 1.63 mm;the area of the right intervertebral foramen increased by about 2.6%,and the area of the left intervertebral foramen decreased by about 0.9%.Compared with rotation manipulation,sagittal end lifting manipulation had fewer changes in the displacement of facet joint,joint capsule stress and intervertebral foramen area,so it was safer to operate.(3)In conclusion,compared with cervical rotation manipulation,sagittal end lifting manipulation has fewer changes in facet joint displacement,intervertebral disc stress/deformation degree,joint capsule stress,and foraminal area.In clinical practice,more appropriate manipulation should be selected based on biomechanical results after an accurate assessment of patients'conditions.
RESUMEN
BACKGROUND:Lumbar fixed-point rotation operation needs collaborative operation of the doctor's hands,and outputs rotation and thumb thrust.Lumbar disc herniation can be treated through disc displacement and adjusting stress distribution.However,the mechanical effects of thumb thrust and the biomechanical effects of loading direction on manipulative effects remain unclear. OBJECTIVE:To compare the biomechanical difference of lumbar fixed-point rotation manipulation for treating lumbar disc herniation under different thrust directions. METHODS:The L3-5 normal three-dimensional finite element model was constructed and validity was verified.According to the intervertebral disc degeneration Pfirrmann grade,intervertebral disc degeneration was simulated by modifying the L4/5 intervertebral space height,the volume of the nucleus pulposus,as well as the material parameters of the annulus fibrosus,nucleus pulposus,and ligament.Finally,the pathological model of L4/5 moderate disc degeneration with left para-central herniation was constructed,and then the pathological models were used as research objects.Simulation technique:spinning to the right;taking the condition on changing the direction of the thumb thrust to establish three modes of operation(M1:thumb push to the left;M2:thumb push to the right;M3:no thrust push).The protrusion displacement and the disc stress,and the stress and strain of the facet joint cartilage were compared in the three operating modes. RESULTS AND CONCLUSION:(1)Maximum displacement value of L4/5 disc herniation:displacement was 2.672 3 mm for M1,1.156 1 mm for M2,1.826 4 mm for M3,M1＞M3＞M2.(2)The maximum Von Mises stress of L4/5 discs was 1.846 7 MPa for M1,0.419 0 MPa for M2,and 1.257 9 MPa for M3,M1＞M3＞M2.(3)L4/5 bilateral small cartilage produced different degrees of contact stress changes:It was 0.485 5 MPa for M1,0.026 7 MPa for M2,and 0.441 4 MPa for M3,M1＞M3＞M2.Right cartilage contact force was 0.000 5 MPa for M1,0.025 9 MPa for M2,and 0.001 3 MPa for M3,M2＞M3＞M1;the left greater than the right,M1 had the highest value;cartilage strain was consistent with contact stress changes.(4)Different operation modes will have some biomechanical influences on the diseased intervertebral disc and accessory structure.The M1 operation mode can maximize the displacement of protrusion,disc stress and left joint cartilage contact,which can better promote disc displacement,balance stress distribution and reduce facet joint disorder,so the operation is better.
RESUMEN
BACKGROUND:Patients with femoral intertrochanteric fracture may have nutritional risks during proximal femoral nail anti-rotation surgery,and a clinical predictive model is established based on nutritional assessment tools. OBJECTIVE:To establish the nomogram of the nutritional risk prediction model for patients with intertrochanteric fracture after proximal femoral nail anti-rotation fixation and evaluate the accuracy of the model. METHODS:From December 2018 to July 2022,patients with femoral intertrochanteric fractures who underwent proximal femoral nail anti-rotation fixation in First Department of Orthopedics,Second Affiliated Hospital of Baotou Medical College were selected as the study subjects.The nutritional risk status of patients was assessed using nutritional risk screening 2002.Logistic regression was used to build the model.The receiver operating characteristic curve,Calibration plot calibration curve,and Hosmer-Lemeshow goodness-of-fit test were used to evaluate the discrimination,calibration and clinical applicability of the prediction model.The model was visualized using Nomogram diagrams. RESULTS AND CONCLUSION:(1)Seventy-six patients were included according to the inclusion criteria.The incidence of nutritional risk was 80%after being assessed using nutritional risk screening 2002.(2)The results of Logistic regression analysis demonstrated that age≥77 years old,body mass index<22.80 kg/m2,upper arm circumference<25.01 cm,hemoglobin<98.51 g/L,albumin<31.61 g/L,and prealbumin<138.56 g/L were all independent risk factors for nutritional risk(P<0.05).(3)The area under the receiver operating characteristic curve was 0.919(95%CI:0.843-0.994).(4)The results of the Hosmer-Lemeshow goodness-of-fit test displayed that nutritional risk prediction value was high.(5)It is concluded that the nutritional risk assessment model constructed in this study has a good degree of discrimination and calibration,and has a certain predictive ability,which can be used as a reference tool for nutritional risk assessment of patients after proximal femoral nail anti-rotation fixation.
RESUMEN
The contents recorded in the rotation registration manual is not only the quantitative indicators for evaluating the quality of residency training, but also the important basis for training assessment and issuance of training certificates. In order to solve the problems of data authenticity, information delay, and repeated entry in the rotation registration manual for residency training, Shanghai East Hospital, Tongji University, launched a project to dock the electronic rotation registration manual with the hospital information system. Through the establishment of the project team, the development of working mechanisms, and the implementation of the project, data analysis was used for process reformation and system optimization, so as to continuously improve management efficiency and medical safety while solving problems and form a set of implementation system with reference significance in practice.
RESUMEN
Introducción: El carcinoma basocelular es actualmente el cáncer de piel más frecuente, siendo su principal factor de riesgo la exposición a radiación ultravioleta. Su tratamiento es la resección quirúrgica, según riesgo de recurrencia. La reconstrucción facial posterior a la resección se enfrentará según la unidad estética de la cara, lo cual determinará la técnica quirúrgica a utilizar. Material y Método: El siguiente caso clínico aborda la resección de un carcinoma basocelular nodular morfeiforme ubicado en mejilla y ala nasal, y posterior reconstrucción mediante el uso de un Colgajo de Mustardé, con resultado exitoso. Resultados: Evolución favorable, con reseccion completa de la lesion tumoral y vitalidad del colgajo postoperatorio. Cursó con una leve desviación nasal que cedió con masaje de la cicatriz. Se puede plantear una plastía de retoque del ala nasal a futuro. Conclusión: Presentamos un caso clínico de un carcinoma basocelular facial con alto riesgo de recurrencia que fue tratado en forma segura y efectiva con un colgajo de Mustardé.
Introduction: Basal-cell carcinoma is currently the most frequent type of skin cancer, its main risk factor being exposure to ultraviolet radiation. Treatment consists of surgical resection, according to recurrence risk. Post-resection facial reconstruction should be faced according to the aesthetic unit of the face, which will determine the surgical technique. Material and Method: The following clinical case presents the resection of a morpheiform nodular basal-cell carcinoma located on the cheek and nasal wing, and subsequent reconstruction using a Mustarde flap, with successful results. Results: Favorable evolution with complete resection of the tumor lesion and postoperative vitality of the flap. The patient presented a slight nasal deviation that resolved with scar massage. A nasal wing plasty can be considered in the future. Conclusion: We present a facial basal-cell carcinoma clinical case that was safely and effectively treated with a Mustarde flap.
RESUMEN
Introduction: The flaps, whose function is to reduce or redirect tension during a closure, are classified based on their primary movement: transposition, advancement, and rotation, each with its characteristics, indications, and peculiarities. Combining the qualities of the transposition flaps with those of rotation, which make up the S-Apple flap, makes it more versatile and with better aesthetic results than the bilobed flap, which denotes the archetype for the appearance of the S-Apple. Method: Having the rotation and transposition flaps as an archetype, four flaps are made in the S-Apple flap, which are rotated and transposed to close the defect. This is excised in a circular format for the oncological safety of margins. The "S" of the flap is traced at a 30º angle in relation to the defect. The arm dimension must be the same diameter as the defect, with the flaps transposed as in a z-plasty, and the flap rotated to cover the defect, resulting from the exeresis of the lesion. Results: No necrosis, infection, dehiscence, recurrences, trapdoor scars, or rotation point elevation were observed. The scars were classified as satisfactory and extremely satisfactory. Conclusion: The S-Apple flap proved versatile and easy to mark with excellent aesthetic and functional results.
Introdução: Os retalhos, com função de reduzir ou redirecionar a tensão durante um fechamento, são classificados com base em seu movimento primário: transposição, avanço e rotação, cada um com suas características, indicações e peculiaridades. O arregimentar das qualidades dos retalhos de transposição com os de rotação, que compõem o retalho S-Apple, tornam-no mais versátil e com melhores resultados estéticos em relação ao retalho bilobado, que denota o arquétipo para o surgimento do S-Apple. Método: Tendo como arquétipo os retalhos de rotação e transposição, no retalho S-Apple são confeccionados quatro retalhos, que são rotacionados e transpostos para fechamento do defeito. Este é excisado em formato circular para segurança oncológica de margens. O "S" do retalho é traçado em um ângulo de 30º em relação ao defeito. A dimensão do braço deve ser do mesmo diâmetro do defeito, sendo os retalhos transpostos como em uma zetaplastia e o retalho rotacionado para cobrir o defeito, resultante da exérese da lesão. Resultados: Não foram observadas necroses, infecção, deiscências, recidivas, cicatrizes em alçapão e elevação em ponto de rotação. As cicatrizes foram classificadas como satisfatórias e extremamente satisfatórias. Conclusão: O retalho S-Apple se mostrou um retalho versátil de fácil marcação com excelentes resultados estéticos e funcionais.
RESUMEN
Implantable collamer lens(ICL)and toric ICL(TICL)are clinically common types of posterior chamber phakic intraocular lenses, they are mainly used to correct high myopia and low-to-moderate myopia of eyes whose corneal conditions are not suitable for corneal laser surgery. Accurate preoperative measurement, safe intraoperative implantation and appropriate postoperative location of lenses are critical to ensure the outcome of ICL implantable, and the appearance of V4c ICL with a central hole ensures the safety of this surgery to a greater extent. However, the intraocular position of both ICL and TICL is not invariable. Some studies have shown that the vault has a trend of decreasing year by year after ICL surgery, but its reason is unknown. And spontaneous rotation may occur after the TICL surgery, thereby causing visual loss, which is one of the main causes of TICL replacement. And postoperative changes in the position of the central hole also need attention. In addition, the visual quality of the operated eye will change after ICL/TICL implantation, but whether the change of intraocular positions of implanted lenses will affect the postoperative visual quality is also a problem that needs to be paid attention to and explored. Therefore, this paper reviewed the postoperative changes in vault, TICL axis, position of the central hole and their causes, as well as the effects of these changes on postoperative visual quality, offering valuable clinical guidance for accurate preoperative selection of ICL/TICL and surgical design, so as to improve the effectiveness and stability of ICL implantation in correction of myopic refractive error.
RESUMEN
ObjectiveTo observe the effect of motor imagery therapy on hand function and motor imagery ability of stroke patients. MethodsFrom March, 2018 to March, 2020, 41 stroke patients in Beijing Bo'ai Hospital were selected and randomly divided into control group (n = 20) and observation group (n = 21). Both groups received conventional rehabilitation training, and the observation group received motor imagery therapy in addition, for four weeks. Before and after training, the scores of Fugl-Meyer Assessment-Hand (FMA-H) and Kinesthetic and Visual Imagery Questionnaire-10 (KVIQ-10), and the accuracy of mental rotation task were compared between two groups. ResultsOne patient in the observation group dropped down. Before training, there was no significant difference in the scores of FMA-H and KVIQ, and the accuracy of mental rotation task between two groups (P > 0.05). After training, all the indexes improved in both groups (t > 6.611, P < 0.001), and the scores of FMA-H (t = 3.742, P < 0.001) and KVIQ (t = 4.122, P < 0.001), and the accuracy of mental rotation task (t = 2.075, P < 0.05) were higher in the observation group than in the control group. ConclusionMotor imagery therapy could facilliate the recovery of hand dysfunction and improve the motor imagery ability of stroke patients.
RESUMEN
There are few researches on the modulation effect of transcranial direct current stimulation(tDCS) on complex spatial cognition. Especially, the influence of tDCS on the neural electrophysiological response in spatial cognition is not yet clear. This study selected the classic spatial cognition task paradigm (three-dimensional mental rotation task) as the research object. By comparing the changes in behavior and event-related potentials in different modes of tDCS before, during and after the application of tDCS, this study analyzed the behavioral and neurophysiological effects of tDCS on mental rotation. The comparison between active-tDCS and sham-tDCS showed no statistically significant difference in behavior between different stimulation modes. Still, the changes in the amplitudes of P2 and P3 during the stimulation were statistically significant. Compared with sham-tDCS, the amplitudes of P2 and P3 in active-tDCS mode showed a greater decrease during the stimulation. This study clarifies the influence of tDCS on the event-related potentials of the mental rotation task. It shows that tDCS may improve the brain information processing efficiency during the mental rotation task. Also, this study provides a reference for an in-depth understanding and exploration of the modulation effect of tDCS on complex spatial cognition.
Asunto(s)
Estimulación Transcraneal de Corriente Directa , Cognición , Potenciales Evocados , EncéfaloRESUMEN
Post-injury rotation contractures of the forearm significantly interfere with various activities of daily living, such as washing the face, receiving change, or wiping a desk, and cause distress to patients. The Colello-Abraham dynamic pronation-supination splint is useful for rotation contractures of the forearm；however, the device includes several small parts and a complicated structure, and assembling the appliance requires technical expertise. Here, we report a case of rotation contracture of the forearm that improved following the use of a simple dynamic splint.
RESUMEN
Post-injury rotation contractures of the forearm significantly interfere with various activities of daily living, such as washing the face, receiving change, or wiping a desk, and cause distress to patients. The Colello-Abraham dynamic pronation-supination splint is useful for rotation contractures of the forearm；however, the device includes several small parts and a complicated structure, and assembling the appliance requires technical expertise. Here, we report a case of rotation contracture of the forearm that improved following the use of a simple dynamic splint.
RESUMEN
The purpose of this study was to determine the differences in the growth patterns of the external oblique (EO), internal oblique (IO), and transversus abdominis (TrA) muscles in adolescence baseball players. The subjects were 17 elementary school students (ES), 56 junior high school students (JS), and 21 high school students (HS) who played baseball. The EO, IO, and TrA muscle thicknesses were imaged using an ultrasound imaging device and analyzed separately on the dominant and non-dominant sides. Curve regression estimation of the relationship between EO, IO, and TrA and chronological age was used to read inflection points. An analysis of covariance was also performed, using body weight as a covariate for comparison with each of the EO, IO, and TrA grades. The inflection point readings showed that TrA was 11.26 years old (p<0.01, R2=0.45) for the dominant side and 10.10 years old (p<0.01, R2=0.46) for the non-dominant side, earlier than the inflection points of EO and IO. Analysis of covariance showed no significant difference in EO between any of the grades. IO showed significantly higher values for muscle thickness as the grade increased, both on the dominant and non-dominant side. TrA was higher for JS among ES and JS and higher for HS among ES and HS on both the dominant and non-dominant sides. EO may growth with increasing body size, while IO is interpreted to increase with increasing age due to the movement of baseball. TrA may grow earlier than EO and IO.
RESUMEN
OBJECTIVE@#To measure and compare medial proximal tibial angle (MPTA) of lower limbs under different axial rotation angles(neutral position, 30° internal rotation, 30° external rotation) on the load position radiographs, and explore changes and significance of MPTA measured within and between groups of tibia at different axial rotation positions.@*METHODS@#From January 2018 to December 2018, 40 patients with knee osteoarthritis (KOA) were selected, with a total of 80 limbs, including 12 males and 28 females, aged from 29 to 73 years old with an average of (59.6±12.7) years old. Full length radiographs of the lower limbs were taken on neutral tibia position, 30° internal rotation and 30° external rotation, respectively. MPTA was measured and the results were compared between groups and within groups.@*RESULTS@#MPTA measured on the left lower extremity of neutral tibia, 30° internal rotation and 30° external rotation were (86.08±2.48) °, (88.62±2.94) ° and (83.47±3.10) °, respectively. MPTA measured on the right lower limb were (86.87±1.97) °, (89.02±2.39) ° and (83.80±2.77) °, respectively, and there were no significant difference in MPTA measured between rotation angle group (P>0.05). While there were statistical difference in MPTA on the same limb between groups (P<0.05). On 30° internal rotation, MPTA of left and right lower limbs increased by (2.54±1.74) ° and (2.15±1.78) ° compared with tibia neutral position. On 30° external rotation, MPTA of left and right lower limbs decreased (2.61±2.03) ° and (3.07±1.75) ° compared with tibial neutral position.@*CONCLUSION@#When a full-length X-ray film is taken on the weight-bearing position of both lower limbs, if there is axial rotation or external rotation of tibia, MPTA will increase or decrease compared with neutral position, which may cause a certain degree of deviation in clinical operation based on the accurate measurement of MPTA. However, the extent to which this bias affects the clinical operation effect remains to be verified. In addition, limited by the total number of samples and the number of measurement groups, whether there is a linear relationship between MPTA deviation and tibial axial rotation needs to be further studied.
Asunto(s)
Masculino , Femenino , Humanos , Adulto , Persona de Mediana Edad , Anciano , Tibia/cirugía , Extremidad Inferior , Osteoartritis de la Rodilla/cirugía , Radiografía , Osteotomía/métodos , Articulación de la Rodilla/cirugía , Estudios RetrospectivosRESUMEN
Previous study reported that baseball pitchers had a decreased shoulder internal rotation (IR) range of motion after pitching. However, whether the decreased range of motion associated with pitching is caused by tightness of the posterior shoulder has not been clarified yet. The joint stiffness in the passive torque can be compared with posterior shoulder tightness before and after pitching. Hence, this study aimed to compare shoulder IR stiffness based on passive torque before and after pitching in baseball pitcher. Eleven health male collage baseball pitchers were recruited. Passive torque during IR (max IR, peak torque and stiffness) of dominant and non-dominant arms was measured using an isokinetic dynamometer. Measurements were taken before, after, and post 24 hours after pitching (105 pitches). It was observed that after pitching, max IR and peak torque were significantly decreased compared to those before pitching. However, there was no difference in the stiffness of passive torque among three measurements. In conclusion, healthy college baseball pitchers have a decreased IR range of motion after pitching. However, this result is not due to posterior shoulder tissue tightness, but because of altered stretch tolerance.
RESUMEN
OBJECTIVE@#To provide guidance for hip replacement by analyzing the variation of femoral head rotation center in different hip diseases.@*METHODS@#A total of 5 459 patients were collected from March 2016 to June 2021, who took positive and proportional plain films of both hips for various reasons. The relative position between the rotation center of the femoral head and the apex of the greater trochanter was measured. The positive variation is more than 2 mm above the top of the great trochanter, and the negative variation is more than 2 mm below the top of the great trochanter. A total of 831 patients with variation of femoral head rotation center were collected and were divided into 4 groups according to different diseases, and the variation was counted respectively. There were 15 cases in the normal group involving 10 cases of positive variation and 5 cases of negative variation. There were 145 cases of avascular necrosis of femoral head involving 25 cases of positive variation and 120 cases of negative variation. There were 346 cases of congenital hip dysplasia involving 225 cases of positive variation(including 25 cases of typeⅠ, 70 cases of type Ⅱ, 115 cases of type Ⅲ and 15 cases of type Ⅳ), and 121 cases of negative variation(including 50 cases of crowe typeⅠ, 60 cases of typeⅡ, 10 cases of type Ⅲ and 1 case of type Ⅳ). There were 325 cases of hip osteoarthritis group involving 45 cases of positive variation and 280 cases of negative variation.@*RESULTS@#There was significant difference in variation of femoral head rotation center among the four groups(P<0.05). There was significant difference in variation of femoral head rotation center among different types of congenital hip dysplasia(P<0.05). There were significant differences in cervical trunk angle and eccentricity among different variations of femoral head rotation center(P<0.05).@*CONCLUSION@#The variation of femoral head rotation center is related to cervical trunk angle and eccentricity. The variation of femoral head rotation center is an important factor in hip diseases. The variation of femoral head rotation center is different in different hip diseases. Avascular necrosis of the femoral head and osteoarthritis of the hip were mostly negative variations. With the aggravation of congenital hip dysplasia, the variation of femoral head rotation center gradually changed from negative variation to positive variation.The variation of femoral head rotation center should be paid attention to in the preoperative planning of hip arthroplasty. It is of great significance to select the appropriate prosthesis and place the prosthesis accurately.
Asunto(s)
Humanos , Cabeza Femoral/cirugía , Luxación Congénita de la Cadera/cirugía , Prótesis de Cadera , Artroplastia de Reemplazo de Cadera/métodos , Fémur/cirugía , Estudios Retrospectivos , Resultado del TratamientoRESUMEN
Occlusal plane (OP) is one of the essential factors affecting craniofacial morphology and function. The OP not only assists in diagnosing malocclusion but also serves as an important reference for making treatment plans. Patients with different types of malocclusions have different forms of OP. Compared with patients with standard skeletal facial type, the occlusal plane of patients with skeletal class Ⅱ and high angle is steeper, while that of patients with skeletal class Ⅲ and low angle is more even. In orthodontic treatment, adjusting and controlling the OP can promote the normal growth and development of the mandible in most patients with malocclusion during the early stage of growth, while causing favorable rotation of the mandible in some adults with mild-to-moderate malocclusion. For moderate-to-severe malocclusion, the OP rotation by orthodontic-orthognathic treatment can achieve better long-term stability. This article reviews the evolution of the definition of OP and its implications for diagnosing and the guiding treatment of malocclusion.