Do oral antiseptics used in the dental routine have anti-viral efficacy? a systematic review of in vitro studies / Os antissépticos orais utilizados na rotina odontológica têm eficácia anti-viral? Uma revisão sistemática de estudos in vitro / ¿Los antisépticos orales utilizados en la rutina odontológica tienen eficacia antiviral? Una revisión sistemática de estudios in vitro

Introduction: Mouthwashes play an important role in the dental clinic, but their role on viruses requires investigation. Objective:to review in vitro studies to identify the effect of different mouthwashes on the main viruses associated with routine dental care. Methodology:The following databases were searched in September 2023: PubMed, Embase, Scopus and Web of Science databases; the Cochrane Library and the Virtual Health Library (VHL); and grey literature. In vitro studies that used mouthwashes to reduce the viral load were selected. The PICOS strategy was considered to define eligibility criteria: the Population (viruses involved in the etiology of oral infection), the Intervention (oral antiseptics), the appropriate comparator (positive and negative controls), the Outcomes of interest (reduction of viral load) and the Study design (in vitro studies). Results:Considering the eligibility criteria, 19 articles were included in this review. The efficacy of povidone-iodine (PVP-I), chlorhexidine, Listerine®, essential oils, and cetylpyridinium chloride (CPC) rinses were investigated. PVP-I (0.23%) had its effects mainly associated with coronaviruses SARS(Severe Acute Respiratory Syndrome),demonstrating a significant reduction in viral load after 15 seconds of exposure. Chlorhexidine (0.05%; 0.1% and 0.5%) was ineffective against adenovirus, poliovirus, and rhinovirus respiratory viruses. Listerine® demonstrated superior efficacy against HSV-1 and 2 viruses and influenza A, and cetylpyridine chloride also demonstrated virucidal activity against influenza A. Conclusions:The type, concentration, and time of exposure to antiseptics varied between studies. PVP-I and chlorhexidine digluconate were the most studied substances, butin general, PVP-I was more effective in reducing viral titers, especially concerning coronaviruses. Other antiseptics such as CPC, H2O2 and Listerine® have also shown significant reduction in viral load, but this is a limited number of studies (AU).

Introdução: Os enxaguantes bucais desempenham um papel importante na clínica odontológico, porém seu papel sobre os vírus requer investigações. Objetivo: revisar estudos in vitro para identificar o efeito de diferentes colutórios sobre os principais vírus associados ao atendimento odontológico de rotina. Metodologia: As seguintes bases foram pesquisadas até setembro de 2023: PubMed, Embase, Scopus e Web of Science; a Biblioteca Cochrane e a Biblioteca Virtual em Saúde (BVS); e literatura cinzenta. Foram selecionados estudos in vitro que utilizaram bochechos com o objetivo de reduzir a carga viral. A estratégia PICOS foi considerada para a definição dos critérios de elegibilidade: População (vírus envolvidos na etiologia da infecção oral), Intervenção (antissépticos orais), Comparador (controles positivos e negativos), os Desfechos de interesse (redução da carga viral) e o desenho do estudo (estudos in vitro). Resultados: Considerando os critérios de elegibilidade, 19 artigos foram incluídos para esta revisão. A eficácia da povidona-iodo (PVP-I), clorexidina, Listerine®, óleos essenciais e lavagens com cloreto de cetilpiridínio foram investigadas. O PVP-I(0.23%)teve seus efeitos principalmente associados ao coronavírusSARS (Síndrome Respiratória Aguda Severa),demonstrando uma redução significativa da carga viral após 15 segundos de exposição. A clorexidina mostrou-se ineficaz contra vírus respiratórios de adenovírus, poliovírus e rinovírus. Listerine® demonstrou eficácia superior contra vírus HSV-1 e 2 e vírus influenza A, e cloreto de cetilpiridinio também demonstrou atividade virucida contra influenza A.Conclusões:O tipo, concentração e tempo de exposição aos antissépticos variaram entre os estudos. O PVP-I e o digluconato de clorexidina foram as substâncias mais estudadas, mas no geral, o PVP-I foi mais eficaz na redução dos títulos virais, principalmente no que diz respeito aos coronavírus. Outros antissépticos como CPC, H2O2 e Listerine® também mostraram redução significativa da carga viral, mas trata-se de um número limitado de estudos (AU).

Introducción: Los enjuagues bucales son importantesen la clínica dental, sin embargo, su efecto sobre los virus requiere investigaciones. Objetivo: Revisar estudios in vitro para identificar el efecto de enjuagues bucales sobre los principales virus asociados con larutinaodontológica. Metodología: Las siguientes bases de datos fueron investigadas hasta septiembrede 2023: PubMed, Embase, Scopus y Web of Science; Biblioteca Cochrane y Biblioteca Virtual en Salud (BVS); yliteratura gris. Se seleccionaron estudios in vitro que utilizaron enjuagues bucales con el objetivo de reducir la carga viral. Se consideró la estrategia PICOS para definir los criterios de elegibilidad: Población (virus implicados en la etiología de la infección oral), Intervención (antisépticos bucales), Comparador (controles positivos y negativos), Resultados de interés (reducción de la carga viral) y diseño del estudio (in vitro). Resultados: Considerando los criterios de elegibilidad, se incluyeron 19 artículos.Se investigó la eficacia de povidona yodada (PVP-I), clorhexidina, Listerine®,aceites esenciales y enjuagues de cloruro de cetilpiridinio (CPC). PVP-I(0.23%)mostró sus efectos principalmente asociados al coronavirus SARS(Síndrome Respiratorio Agudo Severo), demostrando una reducción significativa de la carga viral después de 15 segundos. Se ha demostrado que la clorhexidina es ineficaz contra losvirus respiratorios adenovirus, poliovirus y rinovirus. Listerine® demostró una eficacia superior contra los virus HSV-1 y 2 y el virus de la influenza A, y el CPCtambién mostró actividad virucida contra la influenza A.Conclusiones: El tipo, la concentración y el tiempo de exposiciónvariaron entre los estudios. PVP-I y digluconato de clorhexidina fueron las sustancias más estudiadas, pero,PVP-I fue más efectiva en la reducción de los títulos virales, especialmente en lo que respecta a los coronavirus. Otros antisépticos como CPC, H2O2 y Listerine® también mostraron una reducción significativa de la carga viral, pero se trata de un número limitado de estudios (AU).

Small Molecules Accelerate Skin Wound Healing: Shikonin Efficacy and Mechanism of Action in Mice / Las Moléculas Pequeñas Aceleran la Curación de Heridas en la Piel: Eficacia de Shikonin y Mecanismo de Acción en Ratones

SUMMARY: The objective of this study was to investigate the therapeutic wound healing potential and molecular mechanisms of shikonin as small molecules in vitro. A mouse burn model was used to explore the potential therapeutic effect of shikonin; we traced proliferating cells in vivo to locate the active area of skin cell proliferation. Through the results of conventional pathological staining, we found that shikonin has a good effect on the treatment of burned skin and promoted the normal distribution of skin keratin at the damaged site. At the same time, shikonin also promoted the proliferation of skin cells at the damaged site; importantly, we found a significant increase in the number of fibroblasts at the damaged site treated with shikonin. Most importantly, shikonin promotes fibroblasts to repair skin wounds by regulating the PI3K/AKT signaling pathway. This study shows that shikonin can effectively promote the proliferation of skin cell, and local injection of fibroblasts in burned skin can play a certain therapeutic role.

El objetivo de este trabajo fue investigar el potencial terapéutico de cicatrización de heridas y los mecanismos moleculares de la shikonina como moléculas pequeñas in vitro. Se utilizó un modelo de quemaduras en ratones para explorar el posible efecto terapéutico de la shikonina; Rastreamos las células en proliferación in vivo para localizar el área activa de proliferación de células de la piel. A través de los resultados de la tinción para patología convencional, encontramos que la shikonina tiene un buen efecto en el tratamiento de la piel quemada y promueve la distribución normal de la queratina de la piel en el sitio dañado. Al mismo tiempo, la shikonina también promovió la proliferación de células de la piel en el sitio dañado. Es importante destacar que encontramos un aumento significativo en la cantidad de fibroblastos en el sitio dañado tratado con shikonina. Lo más importante es que la shikonina promueve la función reparadora de fibroblastos en las heridas de la piel regulando la vía de señalización PI3K/ AKT. Este estudio muestra que la shikonina puede promover eficazmente la proliferación de células de la piel y que la inyección local de fibroblastos en la piel quemada puede desempeñar un cierto papel terapéutico.

Effect of Toothpaste Fluoride Concentration on Color Stability of Resin Composites: An In Vitro Study

ABSTRACT Objective: To investigate the effects of two different dentifrice fluoride concentrations on the color stability of the composite. Material and Methods: Twenty-seven specimens (2×4×5 mm) each of microfilled (Gradia, GC, Japan) and nanohybrid (Grandio, VOCO, Germany) composites were prepared. The specimens were randomly divided into six groups (control, Fluoflor caries protection toothpaste with 1450ppm Fluoride (EXW, France), and Fluoflor kids toothpaste with 500ppm Fluoride (EXW, France) (n = 9). The specimens were immersed in a mixture of artificial saliva and toothpaste in a ratio of 1:3 and applied for 60 seconds every 12 hours for 42 days. The control samples were incubated in artificial saliva at 37°C. Primary and secondary color measurements were performed using color parameters (L∗a∗b) with a spectrophotoshade (MHT Optic Research AG, Niederhasli, Switzerland). Data were analyzed using a two-way analysis of variance at a significance level of 0.05. Results: According to the two-way ANOVA analysis, there was no significant difference in color change between the composites and no difference in the level of discoloration between different fluoride concentrations(p>0.05). Also, None of the dentifrices caused clinically significant color changes(∆E˂3.3). Conclusion: No clinically unacceptable color changes were observed in the microfilled and nanofilled composites with different concentrations of fluoride toothpaste.

Assessment of Efficiency of Bioactive Glass, Self-Assembling Peptide, and Ozone Remineralising Agents on Artificial Carious Lesion

ABSTRACT Objective: To assess the efficacy of bioactive glass, self-assembling peptide, and ozone-remineralizing agents on the artificial carious lesion. Material and Methods: On the extracted 60 premolar teeth, an artificial carious lesion/demineralization was created. Later, the remineralization of demineralized teeth was done with respective remineralizing agents (Group A: Calcium sodium phosphosilicate (bioactive glass), Group B: Self-assembling peptide, Group C: Ozone remineralizing agents and Group D (Control): De ionized water. The degree of demineralization and remineralization were evaluated using the Vickers Hardness Number. Results: There was a decrease in microhardness from baseline to demineralization in all the groups, and this reduction was found to be statistically considerable. After the remineralization of demineralized samples with respective remineralizing agents, there was an increase in microhardness of 312.38, 276.67, and 254.42 in groups A, B, and C, respectively. In contrast, in Group D, there were no changes. Conclusion: Bioactive glass and self-assembling peptides had higher remineralizing capacities, which can be used to treat early carious lesions.

Effect of Water and Chlorhexidine with Different Pressures of Oral Irrigation Device on the Surface Roughness and Topography of Giomer

Abstract Objective: To evaluate the effect of different pressures of an oral irrigation device (OID) and the irrigation solution type on the surface roughness of the giomer restorative material. Material and Methods: In this in vitro study, disk-shaped giomer samples were fabricated and assigned to 5 groups (n=23): Group 1, storage in distilled water (control); Group 2, OID #7 pressure/ water; Group 3, OID #10 pressure/ water; Group 4, OID #7 pressure/ 0.05% CHX; Group 5, OID #10 pressure/ 0.05% CHX. The samples' treatment simulated a one-year application of OID. Surface roughness (Ra) and topography of the giomer were evaluated using profilometry and scanning electron microscopy. The data were analyzed with Paired t-test, Tukey, and ANOVA tests (α=0.05). Results: The Ra of the samples increased significantly after treatment with OID (p<0.001). The roughness increase in groups with a pressure of 10 was higher than those with a pressure of 7 (p<0.001). The effect of pressure on surface changes was significant (p<0.001). However, the solution type and the cumulative effect of these two factors were insignificant (p=0.08 and p=0.43, respectively). Conclusion: Oral irrigation device with both solutions significantly increased the surface roughness and topographic changes of the giomer. The severity of these changes was related to the device's pressure.

Antifungal activity of 2-chloro-N-phenylacetamide: a new molecule with fungicidal and antibiofilm activity against fluconazole-resistant Candida spp / Atividade antifúngica de 2-cloro-N-fenilacetamida: uma nova molécula com atividade fungicida e anti-biofilme contra Candida spp. resistentes a fluconazol

In the current context of emerging drug-resistant fungal pathogens such as Candida albicans and Candida parapsilosis, discovery of new antifungal agents is an urgent matter. This research aimed to evaluate the antifungal potential of 2-chloro-N-phenylacetamide against fluconazole-resistant clinical strains of C. albicans and C. parapsilosis. The antifungal activity of 2-chloro-N-phenylacetamide was evaluated in vitro by the determination of the minimum inhibitory concentration (MIC), minimum fungicidal concentration (MFC), inhibition of biofilm formation and its rupture, sorbitol and ergosterol assays, and association between this molecule and common antifungal drugs, amphotericin B and fluconazole. The test product inhibited all strains of C. albicans and C. parapsilosis, with a MIC ranging from 128 to 256 µg.mL-1, and a MFC of 512-1,024 µg.mL-1. It also inhibited up to 92% of biofilm formation and rupture of up to 87% of preformed biofilm. 2-chloro-N-phenylacetamide did not promote antifungal activity through binding to cellular membrane ergosterol nor it damages the fungal cell wall. Antagonism was observed when combining this substance with amphotericin B and fluconazole. The substance exhibited significant antifungal activity by inhibiting both planktonic cells and biofilm of fluconazole-resistant strains. Its combination with other antifungals should be avoided and its mechanism of action remains to be established.

No atual contexto de patógenos fúngicos resistentes emergentes tais como Candida albicans e Candida parapsilosis, a descoberta de novos agentes antifúngicos é uma questão urgente. Esta pesquisa teve como objetivo avaliar o potencial antifúngico da 2-cloro-N-fenilacetamida contra cepas clínicas de C. albicans e C. parapsilosis resistentes a fluconazol. A atividade antifúngica da substância foi avaliada in vitro através da determinação da concentração inibitória mínima (CIM), concentração fungicida mínima (CFM), ruptura e inibição da formação de biofilme, ensaios de sorbitol e ergosterol, e associação entre esta molécula e antifúngicos comuns, anfotericina B e fluconazol. O produto teste inibiu todas as cepas de C. albicans e C. parapsilosis, com uma CIM variando de 128 a 256 µg.mL-1, e uma CFM de 512-1,024 µg.mL-1. Também inibiu até 92% da formação de biofilme e causou a ruptura de até 87% de biofilme pré-formado. A 2-cloro-N-fenilacetamida não promoveu atividade antifúngica pela ligação ao ergosterol da membrana celular fúngica, tampouco danificou a parede celular. Antagonismo foi observado ao combinar esta substância com anfotericina B e fluconazol. A substância exibiu atividade antifúngica significativa ao inibir tanto as células planctônicas quanto o biofilme das cepas resistentes ao fluconazol. Sua combinação com outros antifúngicos deve ser evitada e seu mecanismo de ação deve ser estabelecido.

Adaptación marginal e interna de cofias fabricadas por métodos convencionales, CAD/CAM de fresado y sinterizado por láser / Marginal and internal adaptation of copings manufactured by conventional methods, CAD/CAM milling and laser sintering

Introducción: la adaptación marginal e interna de nuestras restauraciones fabricadas por fundición sistemas de fresado y sinterización láser es uno de los factores clínicos más importantes para el éxito de las prótesis fijas, previniendo el riesgo de microfiltración y enfermedad periodontal. Objetivo: evaluar la adaptación marginal e interna de cofias metálicas en aleación Cr-Co confeccionadas por técnicas convencionales, CAD/ CAM de fresado y sinterizado por láser. Material y métodos: estudio de tipo experimental, comparativo e in vitro. Se imprimió un modelo maestro en Cr-Co, proveniente del escaneo de un premolar preparado para corona completa, sobre el cual se diseñaron 30 cofias divididas en tres grupos: el primero que corresponde al grupo cofias fundidas fresadas en disco de cera A (A = 10), el segundo grupo cofias fresadas en disco de metal presinterizado B (B = 10) y el tercer grupo cofias impresas por sinterización láser C (C = 10). Se empleó la réplica de silicona, colocando silicona al interior de cada cofia, sobre el modelo maestro, simulando al cemento, mediante una máquina de ensayo universal se realizó una compresión de 50 N. Luego de retirar cada cofia se rellenaron con silicona pesada de adición, obteniendo una réplica de silicona. Se efectuaron dos cortes transversales en sentido vestíbulolingual y mesiodistal. Se observó el espesor de silicona VPS (vinil poliéter silicona) mediante un estereomicroscopio (Nikon SMZ745T), obteniendo valores en micrómetros. Para el análisis estadístico se utilizó el software SPSS 25 con el fin de realizar la prueba de normalidad y ANOVA de dos vías bajo un nivel de confianza del 95%. Resultados: el menor gap lo obtuvo el grupo de fresadas, seguido de las impresas y por último las fundidas por métodos convencionales. ANOVA de dos vías reveló diferencias estadísticamente significativas entre los tres grupos (p < 0.0001). Conclusiones: se encontró que el gap varía con cada método de fabricación, la técnica convencional de fundido mostró un mayor gap, ninguna excediendo el rango clínicamente aceptable (AU)

Introduction: the marginal and internal adaptation of our restorations manufactured by casting, milling systems and laser sintering is one of the most important clinical factors for the success of fixed prostheses, preventing the risk of microleakage and periodontal disease. Objective: evaluate the marginal and internal adaptation of metal copings in Cr-Co alloy made by conventional techniques, CAD/CAM milling and laser sintering. Material and methods: an experimental, comparative and in vitro study, a Cr-Co master model was printed from the scan of a premolar prepared for a full crown. An experimental, comparative and in vitro study, a Cr-Co master model was printed from the scan of a premolar prepared for a full crown, on which 30 caps divided into three groups were designed; the first group corresponds to the cast copings milled on a wax disc A (A = 10), the second group milled copings on a presintered metal disc B (B = 10) and the third group printed by laser sintering copings C (C = 10). The silicone replica was used, placing silicone inside each coping, on the master model, simulating cement, using a universal testing machine, a 50 N compression was performed. After removing each coping, they were filled with heavy addition silicone, obtaining a silicone replica. Two cross-sections were made in the buccolingual and mesiodistal direction., observing the thickness of the VPS (vinyl polyeter silicone) silicone using a stereomicroscope (Nikon SMZ745T), obtaining values in micrometers. For the statistical analysis, the SPSS 25 software was used in order to perform the normality and two-way ANOVA tests under a 95% confidence level. Results: the smallest gap was obtained by the milled group, followed by the printed ones and finally those cast by conventional methods. Two-way ANOVA revealed statistically significant differences between the three groups (p < 0.0001). Conclusions: the gap was found to vary with each fabrication method, the conventional casting technique showed a larger gap, none exceeding the clinically acceptable range (AU)

Evaluación antifúngica del ozono contra Candida albicans: estudio in vitro / Antifungal evaluation of ozone against Candida albicans: in vitro study

Introducción: la Candida albicans (C. albicans) es un patógeno fúngico que puede causar infecciones superficiales o potencialmente mortales. Los biofilms de C. albicans muestran rasgos fenotípicos únicos, el más destacado es su notable resistencia a una amplia variedad de agentes antimicóticos. Una de las alternativas para inhibir el crecimiento de este microorganismo es el ozono debido a sus propiedades bactericidas, fungicidas y virucidas; sin embargo, escasa información ha sido reportada en C. albicans. Objetivo: el objetivo de este estudio fue evaluar el efecto fungicida del ozono en C. albicans. Material y métodos: la metodología consistió en agregar ozono a tubos de ensayo con medios de caldo nutritivo en diversas concentraciones y tiempos de ozonización. El efecto fungicida fue determinado con la determinación del número de colonias de C. albicans en agar nutritivo a través de procedimiento microbiológicos estandarizados por triplicado. Resultados: todas las muestras con ozono mostraron adecuados niveles de inhibición de crecimiento del microorganismo. Además, el efecto fungicida del ozono se encontró para ser significativamente dependiente del tiempo de ozonización y de la concentración. Conclusión: el uso de terapia con ozono podría tener potencial en el control de infecciones micóticas causadas por la presencia de C. albicans (AU)

Introduction: Candida albicans (C. albicans) is a fungal pathogen that can cause superficial or life-threatening infections. Biofilms of C. albicans display unique phenotypic traits, the most prominent being their remarkable resistance to a wide variety of antifungal agents. One of the alternatives to inhibit the growth of this microorganism is ozone due to its bactericidal, fungicidal and virucidal properties; however, little information has been reported on C. albicans. Objective: the objective of this study was to evaluate the fungicidal effect of ozone on C. albicans. Material and methods: the methodology consisted in adding ozone to test tubes with nutrient broth media in various concentrations and ozonation times. The fungicidal effect was determined by determining the number of colonies of C. albicans in nutrient agar through standardized microbiological procedures in triplicate. Results: all the ozone samples showed adequate levels of growth inhibition of the microorganism. Furthermore, the fungicidal effect of ozone was found to be significantly dependent on ozonation time and concentration. Conclusion: the use of ozone therapy could have potential in the control of fungal infections caused by the presence of C. albicans (AU)

Effects of 970 nm diode laser irradiation on morphology, proliferation, and differentiation of gingival mesenchymal stem cells / Efectos de la irradiación con láser de diodo de 970 m sobre la morfología, la proliferación y la diferenciación de las células madre mesenquimales gingivales

Objective: The objective of this study was to investigate the morphology, proliferation, and differentiation of gingival mesenchymal stem cells (GMSCs) irradiated with a 970 nm Diode Laser (LLLT). It is essential to validate the efficacy of treatment, optimize irradiation conditions and guarantee the safety and quality of stem cells for future use in dental applications. Materials and Methods: GMSCs were cultured in standard conditions and irradiated with a Diode laser (970 nm, 0.5W) with an energy density of 9J/cm2. Cell proliferation was assessed with the WST-1 proliferation kit. GMSCs were differentiated into chondrogenic and osteogenic lineages. Cell morphology was performed with Hematoxylin/eosin staining, and quantitative nuclear analysis was done. Cell viability was monitored with trypan blue testing. Results: GMSCs subjected to irradiation demonstrated a significant increase in proliferation at 72 hours compared to the non-irradiated controls (p=0.027). This indicates that the 970 nm diode laser has a stimulatory effect on the proliferation of GMSCs. LLLT-stimulated GMSCs exhibited the ability to differentiate into chondrogenic and osteogenic lineages. A substantial decrease in cell viability was observed 24 hours after irradiation (p=0.024). However, after 48 hours, the cell viability recovered without any significant differences. This indicates that there might be a temporary negative impact on cell viability immediately following irradiation, but the cells were able to recover and regain their viability over time. Conclusions: This study support that irradiation with a 970 nm diode laser could stimulate the proliferation of GMSCs, maintain their ability to differentiate into chondrogenic and osteogenic lineages, and has minimal impact on the mor- phological characteristics of the cells. These results support the potential use of NIR Lasers in combination with GMSCs as a promising strategy for dental treatments.

Objetivo: El objetivo de este estudio fue investigar la morfología, proliferación y diferenciación de las células madre mesenquimatosas (GMSC) irradiadas con un láser de diodo de 970 nm (LLLT). Es fundamental validar la eficacia del tratamiento, optimizar las condiciones de irradiación y garantizar la seguridad y calidad de las células madre para su uso futuro en aplicaciones dentales.Materiales y Métodos: Las GMSC se cultivaron en condiciones estándar y se irradiaron con un láser de diodo (970 nm, 0,5 W) con una densidad de energía de 9 J/cm2. La proliferación celular se evaluó con el kit de proliferación WST-1. Las GMSC se diferenciaron en linajes condrogénicos y osteogénicos. La morfología celular se realizó con tinción de hematoxilina/eosina y se realizó un análisis nuclear cuantitativo. La viabilidad celular se controló con prueba de azul de tripano. Resultados: Las GMSC sometidas a irradiación demostraron un aumento significativo en la proliferación a las 72 horas en comparación con los controles no irradiados (p=0,027). Esto indica que el láser de diodo de 970 nm tiene un efecto estimulante sobre la proliferación de GMSC. Las GMSC estimuladas con LLLT exhibieron la capacidad de diferenciarse en linajes condrogénicos y osteogénicos. Se observó una disminución sustancial de la viabilidad celular 24 horas después de la irradiación (p=0,024). Sin embargo, después de 48 horas, la viabilidad celular se recuperó sin diferencias significativas. Esto indica que podría haber un impacto negativo temporal en la viabilidad de las células inmediatamente después de la irradiación, pero las células pudieron recuperarse y recuperar su viabilidad con el tiempo. Conclusión: En conclusión, este estudio respalda que la irradiación con un láser de diodo de 970 nm podría estimular la proliferación de GMSC, mantener su capacidad para diferenciarse en linajes condrogénicos y osteogénicos y tiene un impacto mínimo en las características morfológicas de las células. Estos resultados respaldan el uso potencial de láseres NIR en combinación con GMSC como una estrategia prometedora para tratamientos dentales.

Efecto del tratamiento de la morfología oclusal con materiales para restauraciones preventivas / Effect of treating occlusal morphology with materials for preventive restorations

Introducción: las fosas y fisuras son áreas formadas por delgadas irregularidades de la capa del esmalte de la superficie oclusal. La compleja morfología en dientes posteriores es un determinante biológico asociado al desarrollo de caries. Objetivo: evaluar el efecto de diversas formas de tratar la morfología oclusal en la adaptación y penetración de materiales utilizados en restauraciones preventivas. Material y métodos: diseño experimental e in vitro. Sesenta terceros molares fueron distribuidos aleatoriamente en dos grupos: surco sin ameloplastia y con ameloplastia; además, contaban con acondicionamiento del esmalte que se subdividió en tres subgrupos: 1) sellador de fosas y fisuras, 2) adhesivo/sellador de fosas y fisuras y 3) adhesivo/ resina Flow. Resultados: los subgrupos adhesivo/sellador y adhesivo/ Flow alcanzaron mayores valores de adaptación íntima a las paredes del surco. Las diferencias fueron significativas entre los materiales (p = 0.0009). Las mayores zonas de desadaptación resultaron para el sellador sin y con ameloplastia. La penetración de los materiales fue mayor en los surcos con ameloplastia. En los surcos tratados con ameloplastia, el adhesivo/Flow reveló el mayor porcentaje de penetración y la mejor adaptación a las paredes del surco. Conclusiones: la penetración del material está positivamente correlacionada con la profundidad del surco. El sellador con y sin ameloplastia mostró pobre adaptación a las paredes del surco (AU)

Introduction: pits and fissures are areas formed by fine irregularities in the enamel layer of the occlusal surface. The complex morphology in posterior teeth are biological determinants associated with the development of caries. Objective: to evaluate the effect of various ways of treating occlusal morphology on the adaptation and penetration of materials used in preventive restorations. Material and methods: experimental design, in vitro. Sixty third molars were randomly distributed into two groups: groove without ameloplasty and with ameloplasty, with enamel conditioning with three subgroups: 1) pit and fissure sealer, 2) adhesive/pit and fissure sealer, 3) adhesive/resin flow. Results: the adhesive/sealant and adhesive/flow subgroups reached higher values of intimate adaptation to the furrow walls. The differences were significant between the materials (p = 0.0009). The largest areas of maladjustment were found for the sealant without and with ameloplasty. The penetration of the materials was greater in the grooves with ameloplasty. In the grooves treated with ameloplasty, the adhesive/flow revealed the highest percentage of penetration and the best adaptation to the walls of the groove. Conclusions: the penetration of the material is positively correlated with the depth of the furrow. The sealant with and without ameloplasty showed poor adaptation to the sulcus walls (AU)

Ventajas de la secuenciación de próxima generación sobre la hibridación fluorescente in situ para detectar la codeleción 1p/19q en oligodendrogliomas / Advantages of next generation sequencing over fluorescent in situ hybridization to detect 1p/19q codeletion in oligodendroglioma / Vantagens do sequenciamento de próxima geração sobre a hibridização fluorescente in situ para detectar codeleção 1p/19q em oligodendrogliomas

El perfil molecular de los gliomas permite garantizar la precisión del diagnóstico, informar el pronóstico e identificar opciones de tratamiento. Esta revisión tiene como objetivo exponer que con la secuenciación de próxima generación (NSG) el diagnóstico de los pacientes con oligodendrogliomas puede ser más exacto. Además, con un dispositivo de diagnóstico in vitro, basado en la NSG (F1CDx), en el que se utilizan los bloques de parafina de gliomas para analizar hasta 395 genes relacionados con cáncer (incluido IDH 1 y 2), se puede también informar la pérdida de la totalidad del brazo corto del cromosoma 1 y del brazo largo del cromosoma 19 (codeleción 1p/19q), a diferencia de la hibridación fluorescente in situ (FISH) que detecta desde la más mínima deleción, lo cual los hace sensibles pero no específicos ya que el FISH es incapaz de distinguir entre la pérdida de la totalidad del brazo del cromosoma y una deleción focal. Esta distinción es importante ya que la sobrevida es inferior en tumores con deleción parcial en rela­ción con los oligodendrogliomas, que tienen por definición la pérdida total de ambos cromosomas. Se hace también alusión a otras plataformas genómicas como GlioSeq y GLIO-DNA panel, que pueden cumplir la misma función. En conclusión, la F1CDx puede determinar con precisión 1p/19q con una concordancia del 96.7% frente a FISH. Los casos en que el FISH dio positivo y no concordaban con F1CDx, era porque no se trataba de oligodendrogliomas. F1CDx también analiza todos los genes que permiten la aproximación más exacta al diagnóstico de oligodendroglioma.

Molecular profiling of gliomas helps ensure diagnostic accuracy, inform prognosis, and identify treatment options. This review aims to show that with next generation sequencing (NGS) the diagnosis of patients with oligodendrogliomas can be more accurate. In addition, with an in vitro diagnostic device, based on NSG (F1CDx), in which glioma paraffin blocks are used to analyze up to 395 cancer-related genes (including IDH 1 and 2), it is also possible to report the loss of the entire short arm of chromosome 1 and the long arm of chromosome 19 (1p/19q codeletion), unlike fluorescence in situ hybridization (FISH) that detects even the slightest deletion, making them sensitive but not specific, as FISH is unable to distinguish between the loss of the entire arm of the chromosome and a focal deletion. This distinction is important since survival is lower in tumors with partial deletion compared to oligodendrogliomas, which by definition have the total loss of both chromosomes. Reference is also made to other genomic platforms such as GlioSeq and GLIO-DNA panel, which can fulfill the same function. In conclusion, the F1CDx can accurately determine 1p/19q with a concordance of 96.7% against FISH. The cases in which the FISH was positive and did not agree with F1CDx, it was because they were not oligodendrogliomas. F1CDx also analyzes all the genes that allow the most accurate approach to the diagnosis of oligodendroglioma.

O perfil molecular de gliomas ajuda a garantir a precisão do diagnóstico, informar o prognóstico e identificar as opções de tratamento. Esta revisão tem como objetivo mostrar que com o sequenciamento de próxima geração (NSG) o diagnóstico de pacientes com oligodendrogliomas pode ser mais preciso. Além disso, com um dispositivo de diagnóstico in vitro baseado em NSG (F1CDx), no qual blocos de parafina de glioma são usados para analisar até 395 genes relacionados ao câncer (incluindo IDH 1 e 2), também é possível relatar a perda do todo o braço curto do cromossomo 1 e o braço longo do cromossomo 19 (codeleção 1p/19q), ao contrário da hibridização fluorescente in situ(FISH) que detecta desde a menor deleção, o que os torna sensíveis, mas não específicos, pois o FISH é incapaz de distinguir entre a perda de todo o braço do cromossomo e uma deleção focal. Essa distinção é importante, pois a sobrevida é menor nos tumores com deleção parcial em relação aos oligodendrogliomas, que por definição apresentam a perda total de ambos os cromossomos. Também é feita referência a outras plataformas genômicas, como GlioSeq e painel GLIO-DNA, que podem cumprir a mesma função. Em conclusão, o F1CDx pode determinar com precisão 1p/19q com uma concordância de 96,7% versus FISH. Os casos em que FISH foi positivo e não concordaram com F1CDx, foi porque não eram oligodendrogliomas. O F1CDx também analisa todos os genes que permitem a abordagem mais precisa para o diagnóstico de oligodendroglioma.

Identification of antarctic soil bacteria exhibiting antiproliferative activity against a colon cancer cell line / Identificación de bacterias de suelo antártico que presentan actividad antiproliferativa sobre una línea celular de cáncer de colon

SUMMARY: Cancer is the second leading cause of death in the world and colorectal cancer is the only cancer that has shown a sustained increase in mortality in the last decade. In the search for new chemotherapeutic agents against cancer, extremophilic microorganisms have shown to be a potential source to obtain molecules of natural origin and with selective cytotoxic action towards cancer cells. In this work we analyzed the ability of a collection of Antarctic soil bacteria, isolated on Collins Glacier from the rhizosphere of Deschampsia antarctica Desv plant, to secrete molecules capable of inhibiting cell proliferation of a colorectal cancer tumor line. Our results demonstrated that culture supernatants from the Antarctic bacteria K2I17 and MI12 decreased the viability of LoVo cells, a colorectal adenocarcinoma cell line. Phenotypic and genotypic characterization of the Antarctic bacteria showed that they were taxonomically related and nucleotide identity analysis based on the 16S rRNA gene sequence identified the bacterium K2I17 as a species belonging to the genus Bacillus.

El cáncer es la segunda causa de muerte en el mundo y el cáncer colorrectal es el único que presenta un aumento sostenido de la mortalidad en la última década. En la búsqueda de nuevos agentes quimioterapeúticos contra el cáncer, se ha propuesto a los microorganismos extremófilos como una fuente potencial para obtener moléculas de origen natural y con acción citotóxica selectiva hacia las células cancerígenas. En este trabajo analizamos la capacidad de una colección de bacterias de suelo antártico, aisladas en el glaciar Collins desde rizosfera de la planta de Deschampsia antarctica Desv, de secretar moléculas capaces de inhibir la proliferación celular de una línea tumoral de cáncer colorrectal. Nuestros resultados demostraron que los sobrenadantes de cultivo de las bacterias antárticas K2I17 y MI12 disminuyeron la viabilidad de la línea celular de adenocarcinoma colorrectal LoVo, en un ensayo de reducción metabólica de MTT. La caracterización fenotípica y genotípica de las bacterias antárticas, demostró que estaban relacionadas taxonómicamente y el análisis de la identidad nucleotídica en base a la secuencia del gen ARNr 16S identificó a la bacteria K2I17 como una especie perteneciente al género Bacillus.

Atividade in vitro de extratos e frações de Copernicia prunifera (Arecaceae) contra bactérias de importância clínica em saúde pública / In vitro activity of extracts and fractions of Copernicia prunifera (Arecaceae) against bacteria of clinical importance in public health / Actividad in vitro de extractos y fracciones de Copernicia prunifera (Arecaceae) frente a bacterias de importancia clínica en salud pública

Introdução: O aumento contínuo da resistência bacteriana aos antibióticos convencionais é um problema de importância global. Encontrar produtos como alternativas terapêuticas naturais é essencial. As plantas medicinais possuem uma composição química muito rica, que podem ser estruturalmente otimizadas e processadas em novos antimicrobianos. Objetivo: Avaliar o potencial antibacteriano frente a microrganismos humanos potencialmente patogênicos do extrato etanólico e frações de Copernicia prunifera. Metodologia: A triagem fitoquímica de plantas foi realizada usando métodos de precipitação e coloração e a atividade antibacteriana utilizando o método de difusão em disco e microdiluição em caldo contra cepas padronizadas de Klebsiella pneumoniae, Escherichia coli, Pseudomonas aeruginosa e Staphylococcus aureus. Resultados: A triagem fitoquímica revela a presença de taninos, flavonoides, esteroides, triterpernóides, saponinas e alcaloides. Os extratos etanólico e frações da casca do caule e folhas tiveram atividade inibitória contra S. aureus e K. pneumonie com zona de inibição que variou de 7,0±1,73 a 9,33±0,58 mm pelo método de difusão em disco. Pelo método de microdiluição em caldo os extratos foram satisfatórios somente contra K. pneumoniae (CIM = 125 a 1000 µg/mL) S. aureus, P. aeruginosa e E. coli se mostraram resistentes aos testes (CIM > 1000 µg/mL). Conclusão: Esses resultados fornecem uma base para futuras investigações em modelos in vivo, para que os compostos de C. prunifera possam ser aplicados no desenvolvimento de novos agentes antimicrobianos contra K. pneumoniae.

Introduction: The continuous increase in bacterial resistance to conventional antibiotics is a problem of global importance. Finding products as natural therapeutic alternatives is essential. Medicinal plants have a very rich chemical composition, which can be structurally optimized and processed into novel antimicrobials. Objective: To evaluate the antibacterial potential against potentially pathogenic human microorganisms of the ethanolic extract and fractions of Copernicia prunifera. Methodology: Phytochemical screening of plants was performed using precipitation and staining methods and antibacterial activity using the disk diffusion and broth microdilution method against standardized strains of Klebsiella pneumoniae, Escherichia coli, Pseudomonas aeruginosa and Staphylococcus aureus. Results: Phytochemical screening reveals the presence of tannins, flavonoids, steroids, triterpernoids, saponins and alkaloids. The ethanolic extracts and fractions of stem bark and leaves had inhibitory activity against S. aureus and K. pneumonie with zone of inhibition ranging from 7.0±1.73 to 9.33±0.58 mm by disc diffusion method. By broth microdilution method the extracts were satisfactory only against K. pneumoniae (MIC = 125 to 1000 µg/mL) S. aureus, P. aeruginosa and E. coli were resistant to the tests (MIC > 1000 µg/mL). Conclusion: These results provide a basis for further investigation in in vivo models, so that compounds from C. prunifera can be applied in the development of new antimicrobial agents against K. pneumoniae.

Introducción: El continuo aumento de la resistencia bacteriana a los antibióticos convencionales es un problema de importancia mundial. Es esencial encontrar productos como alternativas terapéuticas naturales. Las plantas medicinales tienen una composición química muy rica, que puede optimizarse estructuralmente y transformarse en nuevos antimicrobianos. Objetivo: Evaluar el potencial antibacteriano frente a microorganismos humanos potencialmente patógenos del extracto etanólico y fracciones de Copernicia prunifera. Metodología: Se realizó el cribado fitoquímico de las plantas mediante los métodos de precipitación y tinción y la actividad antibacteriana mediante el método de difusión en disco y microdilución en caldo frente a cepas estandarizadas de Klebsiella pneumoniae, Escherichia coli, Pseudomonas aeruginosa y Staphylococcus aureus. Resultados: El cribado fitoquímico revela la presencia de taninos, flavonoides, esteroides, triterpernoides, saponinas y alcaloides. Los extractos etanólicos y las fracciones de la corteza del tallo y las hojas presentaron actividad inhibitoria contra S. aureus y K. pneumonie con una zona de inhibición que osciló entre 7,0±1,73 y 9,33±0,58 mm por el método de difusión en disco. Por el método de microdilución en caldo, los extractos sólo fueron satisfactorios frente a K. pneumoniae (CMI = 125 a 1000 µg/mL). S. aureus, P. aeruginosa y E. coli fueron resistentes a las pruebas (CMI > 1000 µg/mL). Conclusiones: Estos resultados proporcionan una base para futuras investigaciones en modelos in vivo, de modo que los compuestos de C. prunifera puedan aplicarse en el desarrollo de nuevos agentes antimicrobianos contra K. pneumoniae.

Efecto de diferentes condiciones y modos de aplicación sobre la fuerza de unión de los adhesivos a la dentinaEffect of different conditions and modes of application on bond strength of adhesives to dentine / Effect of different conditions and modes of application on bond strength of adhesives to dentine

Objective: To evaluate the microtensile bond strength in different dentine conditions (etched-E, non-etched-N, dry-D and wet-W) of a multimode adhesive (Scotchbond Universal-SU, 3M/ESPE) and a total etching adhesive (Ambar-AB, FGM) using a sonic device (Smart Sonic Device-SD, FGM). Material and methods: In this in vitro study, ninety six sound extracted human molars were divided into 12 groups (n=8) according to different dentine conditions and adhesive systems. Enamel was removed and the middle dentine surfaces were polished. Each adhesive system was applied according to the different dentine conditions, and composite resin blocks were incrementally built up and stored for 24 hours. Specimens were sectioned into sticks and bond strength data were analyzed with the Kruskal-Wallis test and Mann-Whitney U tests. Results: No effects of sonic application and were observed. In general, AB showed lower results compared to the SU. E and N conditions did not statistically affect the bond strength of SU groups. Dry dentine presented statistically superior bond strength values when compared to wet dentine for SU/E/SD group. Conclusion: Adhesion of dry dentine with multimode adhesive system may be superior to wet dentine with sonic application. The modes of application had no influence in bond strength of studied adhesives.

Objetivo: Evaluar la resistencia de la unión microtensil en diferentes condiciones de dentina (grabado-E, sin grabado-N, seco-D y húmedo-W) de un adhesivo multimodo (Scotchbond Universal-SU, 3M/ESPE) y un adhesivo de grabado total (Ambar-AB, FGM) utilizando un dispositivo sónico (Smart Sonic Device-SD, FGM). Material y Métodos: En este estudio in vitro, noventa y seis molares humanos extraídos sanos se dividieron en 12 grupos (n=8) de acuerdo con diferentes condiciones de dentina y sistemas adhesivos. Se eliminó el esmalte y se pulieron las superficies centrales de la dentina. Cada sistema adhesivo se aplicó de acuerdo con las diferentes condiciones de dentina, y los bloques de resina compuesta se acumularon de forma incremental y se almacenaron durante 24h. Las muestras se seccionaron en barras y los datos de resistencia de la unión se analizaron con la prueba de Kruskal-Wallis y la prueba de U de Mann-Whitney. Resultado: No se observaron efectos de la aplicación sónica. En general, AB mostró resultados más bajos en comparación con el SU. Las condiciones E y N no afectaron estadísticamente la fuerza de unión de los grupos SU. La dentina seca presentó valores de fuerza de adhesión estadísticamente superiores en comparación con la dentina húmeda para el grupo SU/E/SD. Conclusión: La adhesión de la dentina seca con un sistema adhesivo multimodo puede ser superior a la dentina húmeda con aplicación sónica. Los modos de aplicación no tuvieron influencia en la resistencia de la unión de los adhesivos estudiados.

Moderate Toxicity of Potential Boron-containing Therapeutic, Dipotassium-trioxohydroxytetrafl uorotriborate - K2 (B3 O3 F4 OH) in Rats and Mice

Abstract Biological activity of boron-containing compounds (BCCs) has been well-known. Growing interest and numerous applications for BCCs have been reported. Boron and boron-containing acids show low acute toxicity in mammals but data on halogenated boroxine (HB) - dipotassium-trioxohydroxytetrafluorotriborate, K2(B3O3F4OH) acute toxicity have not been reported before. This compound, characterized as a potential therapeutic for skin changes, exhibits no observable genotoxicity in doses lower that 0.1 mg/ml in vitro and 55 mg/kg in vivo. It has also been confirmed as an antitumour agent both in vitro and in vivo as well as an inhibitor of enzymes involved in antioxidant mechanisms. The aim of this study was to assess the acute toxicity of HB and to determine the maximum tolerated dose as well as a dose free of any signs of toxicity in different test organisms. Acute toxicity of HB was tested in Sprague-Dawley and Wistar rats and BALB/c mice after single parenteral application of different doses. We determined doses free of any sign of toxicity and LD50 after single dose administration. LD50 of HB ranges from 63 to 75 mg/kg in different test models, meaning that HB shows moderate toxicity

Investigation on formulation parameters of donepezil HCl loaded solid lipid nanoparticles

Abstract Donepezil-HCl is a member of the acetylcholinesterase inhibitors that is indicated for the symptomatic treatment of Alzheimer's disease (AD) and has many side effects. In this study, to reduce the side effects of Donepezil-HCl and increase the penetration of the drug through the blood-brain barrier, we aimed to design a solid lipid nanoparticle (SLN) formulation. The effects of the different formulation parameters, such as homogenization speed, sonication time, lipid and drug concentration, surfactant type and concentration, and volume of the aqueous phase, were assessed for optimization. The particle size and PDI increased with increasing lipid concentration but decreased with increasing amounts of surfactant (Tween 80) and co-surfactant (lecithin). When the homogenization rate and sonication time increased, the particle size decreased and the encapsulation efficiency increased. The optimized formulation exhibited particle size, PDI, encapsulation efficiency, and zeta potential of 87.2±0.11 nm; 0.22±0.02; 93.84±0.01 %; -17.0±0.12 mV respectively. The in vitro release investigation revealed that approximately 70% of Donepezil-HCl was cumulatively released after 24 hours. TEM analysis proved that spherical and smooth particles were obtained and formulations had no toxic effect on cells. The final optimized formulation could be a candidate for Donepezil-HCl application in Alzheimer's treatment with reduced side effects and doses for patients

Effect of polycaprolactone nanocapsules loaded with essential oils on biofilm formation by Staphylococcus aureus strains isolated from bovine mastitis cases

Abstract Bovine infectious mastitis is largely resistant to antibacterial treatment, mainly due to mechanisms of bacterial resistance in the biofilms formed by Staphylococcus aureus. Melaleuca (MEO) and citronella essential oils (CEO) are promising agents for reducing or eliminating biofilms. Free melaleuca oil presented a medium Minimum Inhibitory Concentration (MIC) of 0.625% and a Minimum Bactericidal Concentration (MBC) of 1.250%, while free citronella oil showed medium MIC and MBC of 0.313%. Thus, free CEO and MEO demonstrate bacteriostatic and bactericidal potential. We generated polymeric nanocapsules containing MEO or CEO and evaluated their efficacy at reducing biofilms formed by S. aureus. Glass and polypropylene spheres were used as test surfaces. To compare the responses of free and encapsulated oils, strains were submitted to 10 different procedures, using free and nanoencapsulated essential oils (EOs) in vitro. We observed no biofilm reduction by MEO, free or nanoencapsulated. However, CEO nanocapsules reduced biofilm formation on glass (p=0.03) and showed a tendency to diminish biofilms on polypropylene (p=0.051). Despite nanoencapsulated CEO reducing biofilms in vitro, the formulation could be improved to modify the CEO component polarity and, including MEO, to obtain more interactions with surfaces and the biofilm matrix

Development and characterization of photoprotective nanoemulsions containing Babassu (Orbignya phalerata Mart. ) lipophilic extract

Abstract Oil-in-water photoprotective nanoemulsions (NEs) were developed using Babassu (BBS) lipophilic extract, nonionic surfactants, and low concentrations of organic sunscreens by ultrasonic processing. BBS extract was chosen due to its suitable physicochemical properties (acidity index, peroxide index, refraction index, and relative density) and predominance of saturated fatty acids, identified by gas chromatography-mass spectrometry (GC-MS), which promote biological activities and high oxidative stability. NEs were characterized by mean droplet size, morphology, polydispersity index (PdI), pH, and organoleptic properties, and the physical stability of the NEs was evaluated for 120 days at room temperature. The sun protection factor (SPF) was determined, and the photostability and in vitro cytotoxicity assays were performed for NEs. All NEs remained stable for 120 days, with a droplet size <150 nm and a monomodal distribution profile. The pH values were compatible with the skin's pH. NE3 showed a spherical morphology, with a mean droplet size of 125.15 ± 0.16 nm and PdI of 0.145 ± 0.032. NE3 containing BBS extract and sunscreens presented an SPF of 35.5 ± 3.0, was photostable after 6 h of radiation and was non-cytotoxic to fibroblast cells. Thus, NE3 could be considered a promising formulation for developing synergic plant-extract sunscreen photoprotective products for the market

Interchangeability of medications and biopharmaceutical implication of taking drugs with fluids other than water: ibuprofen case study

Abstract The aim of this study was to compare the dissolution properties of ibuprofen solid oral dosage forms commercially available in Bosnia and Herzegovina and to estimate the influence of dissolution medium composition on the drug release. Eight products (A-H) were subjected to in vitro dissolution test using experimental conditions described in USP42-NF37. Dissolution properties of one selected product were examined in the presence of alcohol (22.2% v/v) and fruit juice (22.2% v/v). Products marked B-H complied with the pharmacopeial criteria. Dissolution profile of product B was similar with dissolution profiles of products D, E, F and G and similarity was also found between products A-D, C-G, D-G and E-F. Drug release from most of the examined preparations fitted best to the Weibull kinetic model. In the presence of alcohol in the medium, higher amount of ibuprofen was dissolved. Contrary, ibuprofen dissolved in the presence of fruit juice was significantly lower. Differences in the dissolution profiles of investigated preparations suggest that their interchangeability should be additionally considered and demonstrated with in vivo bioequivalence studies. Presence of different substances in the medium can affect dissolution properties of ibuprofen, emphasizing the importance of the patient's compliance.

Encapsulation of benznidazole in nanostructured lipid carriers and increased trypanocidal activity in a resistant Trypanosoma cruzi strain

Abstract Chagas disease is a neglected parasitic disease caused by Trypanosoma cruzi, whose treatment has remained unsatisfactory for over 50 years, given that it is limited to two drugs. Benznidazole (BZN) is an efficient antichagasic drug used as the first choice, although its poor water-solubility, irregular oral absorption, low efficacy in the chronic phase, and various associated adverse effects are limiting factors for treatment. Incorporating drugs with such characteristics into nanostructured lipid carriers (NLC) is a promising alternative to overcome these limiting obstacles, enhancing drug efficacy and bioavailability while reducing toxicity. Therefore, this study proposed NLC-BZN formulations in different compositions prepared by hot-melt homogenization followed by ultrasound, and the optimized formulation was characterized by FTIR, DRX, DSC, and thermogravimetry. Biological activities included in vitro membrane toxicity (red blood cells), fibroblast cell cytotoxicity, and trypanocidal activity against epimastigotes of the Colombian strain of T. cruzi. The optimized NLC-BZN had a small size (110 nm), negative zeta potential (-18.0 mV), and high encapsulation (1.64% of drug loading), as shown by infrared spectroscopy, X-ray diffraction, and thermal analysis. The NLC-BZN also promoted lower in vitro membrane toxicity (<3% hemolysis), and 50% cytotoxic concentration (CC50) for NLC-BZN in L929 fibroblast cells (110.7 µg/mL) was twice the value as the free BZN (51.3 µg/mL). Our findings showed that the NLC-BZN had higher trypanocidal activity than free BZN against the epimastigotes of the resistant Colombian strain, and this novel NLC-BZN formulation proved to be a promising tool in treating Chagas disease and considered suitable for oral and parenteral administration