Résumé
ABSTRACT Objective To perform a morphological evaluation concerning the extent of interproximal enamel reduction (IPR) with different manual instruments in different types of teeth and a qualitative analysis of enamel surface characteristics at the contact point before and after IPR. Material and Methods 40 freshly extracted, caries-free, and intact human teeth were used for the study (20 bicuspids and 20 incisors) and performed IPR just on the mesial surface. The morphological variation of contact point was evaluated by superimposed the stl file, obtained thanks to an extraoral scanner, at T0 and T1 for each tooth. Two types of strip were used, Intensiv Manual Ortho Strips Coarse/Medium and Steelcarbo Horico Strips. Teeth were then cut lengthwise, removed the most apical root portion and the mesial and distal halves were gilded and observed at different magnifications. Results The morphological variation following stripping mainly depends on the extent of the stripping, while the diameter, the type of strip and the shape of the tooth itself do not appear to be relevant. The 500X and 1500X magnifications allowed to appreciate better the characteristics of the surface of the stripped enamel and the differences with the intact enamel. All teeth treated, independently from the kind of strip used, shows deep marks and grooves in the direction of stripping. In both cases, the enamel appears significantly damaged at great magnifications. Conclusion Stripping always and inevitably leads to a change in the shape of the contact point and is directly correlated to the amount of stripping performed. The use of polishing after the removal of enamel interproximal is necessary in all cases.
Sujets)
Mâle , Femelle , Orthodontie/instrumentation , Techniques in vitro , Arcade dentaire , Denture , Malocclusion dentaire/étiologie , Analyse de régression , Études longitudinales , Émail dentaire , Études d'évaluation comme sujet , Italie/épidémiologieRésumé
ABSTRACT Objective: To investigate the effectiveness of Suresmile® lingual therapy on torque, tip, and rotations measures through digital evaluation of planning and post-treatment digital models. Material and Methods: A sample of 12 Caucasian adult patients (4 men; mean age 30.6 years ± 3.9 and 8 women; mean age 31.4 years ± 4.5) treated with the Suresmile® lingual orthodontic technique was retrospectively selected, regardless of the type of malocclusion. Digital planning was performed with Suresmile® software, while lingual therapy was accomplished with interactive self-ligating lingual brackets and customized Suresmile® arches. First, digital models of planning and post-treatment digital models were compared using VAM software (and the discrepancies were analyzed through MANOVA and four multivariate. Then, Tukey and Bonferroni's post-hoc tests are performed. Results: The accuracy average values are 60.11 ± 27.67% for torque, 53.52 ± 27.37% for tip and 59.19 ± 26.42% for rotation, while for inaccuracy values are 2.72° ± 2.23° for torque, 2.98° ± 2.16°for tip and 3.58° ± 3.29° for rotation. No significant differences have been recorded evaluating different sectors of both arches. Conclusion: This retrospective preliminary study highlight how overcorrections, especially in the Suresmile lingual technique, should be performed during orthodontic planning. Moreover, the study gets bases for further, more structured future studies that should involve larger and more homogeneous samples.
Sujets)
Humains , Femelle , Adulte , Brackets orthodontiques , Occlusion dentaire , Dentisterie esthétique , Appareils dentaires fixes , Malocclusion dentaire , Projets pilotes , Analyse multifactorielle , Études rétrospectives , Statistique non paramétrique , ItalieRésumé
ABSTRACT Objective: To evaluate the effects of passive self-ligating appliances (PSLAs) and conventional ligating appliances (CLAs) during orthodontic treatment regarding torque, tip, and transversal dental changes. Material and Methods: Dental parameters were digitally acquired from pre- and post-treatment models of each subject belonging to two groups of patients treated with PSLAs (23 patients; 11 females and 12 males with a mean age of 14.2 ± 1.6 years) and CLAs (18 patients; 10 females and 8 males with a mean age of 14.3 ± 1.9 years), respectively. All subjects had Class I or slight Class II malocclusion (= 2mm), permanent dentition and no previous orthodontic treatment. After normality of data was assumed, a paired sample t-test rejected any side differences at T0 and, therefore, the data were grouped by tooth group. Statistical analyses were performed using a linear mixed-effect framework, assuming the appliance, time, and interactions as fixed effects and the tooth type as random effects. Finally, post-hoc effect analysis was used to contrast modeled marginal effects (p<0.05). Results: For both appliances, there is a general increase of both torque and transverse values at T1, especially for PSLAs. Tip shows a general reduction in the lateral sectors for both appliances is registered. The only significant statistical difference referred to appliances' efficacy is located to mandibular intermolar width. Conclusion: Both appliances have an expansive potential for both torque and transverse dental changes. No evident differences are detectable between appliances except for the rate of the mandibular intermolar width increase.
Sujets)
Humains , Mâle , Femelle , Enfant , Adolescent , Appareils orthodontiques , Brackets orthodontiques , Torsion mécanique , Malocclusion dentaire/étiologie , Malocclusion de classe I/étiologie , Études rétrospectives , Interprétation statistique de données , Moment de torsion , ItalieRésumé
ABSTRACT Objective: To compare the dento-alveolar effects between dental and skeletal anchored expansion devices to achieve maxillary expansion in different groups of patients: pure dental anchorage was used in growing patients and skeletal anchorage in adult patients. Linear, angular and volumetric parameters have been analysed. Material and Methods: 22 patients has been selected from the total archive of patients treated in the Orthodontics Department of the University of Ferrara, Italy, divided into 3 groups according to the appliance used to obtain the transversal maxillary correction. Digital files of the upper arch were obtained from scans performed using an intro-oral scanner before treatment (T0) and at the end of expansion (T1). Therefore, linear, angular and volumetric measurements have been performed. Results: There is a highly significant statistic variation of the 3-3, 4-4 and 6-6 diameter as a function of time. There was a statistically significant variation of the palatal vault angle and of the 6-6 distance at the cusp level as a function of time. Moreover, it appears that these parameters are reduced in the group with skeletal anchored expander. No tooth considered have encountered a statistically significant change in tip and torque values, no matter the type of RPE and the treatment time. For all patients, we have recorded the superimposition of the maxillary dental cast before and after treatment. Conclusion: In all patients, we obtained a resolution of the maxillary transverse deficit. Patients treated by pure skeletal anchored devices have recorded a less variations of palatal vault angle and the distance between first molar cusps, as if the expansion was gained more parallel. The expansion obtained showed reduced dental side effects, as tip and torque values haven't changed in a statistically significant way.
Sujets)
Humains , Femelle , Enfant , Adolescent , Adulte , Orthodontie , Technique d'expansion palatine/instrumentation , Modèles dentaires , Malocclusion dentaire , Études rétrospectives , Interprétation statistique de données , Italie/épidémiologieRésumé
ABSTRACT Objective: To evaluate the differences in phonetic alterations caused by three different lingual appliances, all bonded in sequence on the same patients. Material and Methods: Lingual brackets (STb, Incognito and Harmony) were bonded from 1.3 to 2.3 with a 0.013 CuNiTi archwire. The text was formulated to evaluate the phonetic variations in a controlled context (logatomi) and more casual sentences. The recording of the text was performed at time t0 (before positioning the brackets), t1 (after positioning the brackets) and t2 (60 minutes after positioning the brackets). An ANOVA-type analysis was performed. Results: A significant correlation was confirmed between the effects of all the linguistic methods used compared to the absence of the same. The most influenced acoustic variables were the center of gravity of the acoustic spectrum of the analyzed sounds (CoG) and the number of zero crossings of the instantaneous amplitude curve of the considered signal. Conclusion: The effects deriving from the positioning of the various brackets were relatively contained: in some cases, for some subjects, for some consonants and in specific contexts, some brackets may occasionally be less invasive than others. However, no lingual system was systematically better than others regarding phonetic alterations.
Sujets)
Humains , Orthodontie , Phonétique , Brackets orthodontiques , Linguistique , Études rétrospectives , Analyse de variance , ItalieRésumé
ABSTRACT Objective: To verify the existence of a correlation between the mesio-distal size of teeth and the arch width by analyzing the data separately for maxillary and mandibular arch in patients with ideal occlusion Material and Methods: 58 patients with ideal occlusion were studied, for a total of 276 files analyzed. Dental casts were then scanned using a professional scanner (Epson Perfection v 330) and images were obtained in TIFF format at 600 dpi. All single teeth measurements were carried out for all teeth of both arches using the VAM software (Vectra, Canfield Scientific, Fairfield, NJ, USA). The repeatability and reproducibility of the measurement method were evaluated using the Gauge R&R method. In case a correlation between tooth size and arch size is found to be significant, a linear regression analysis can be applied through the following statistical relationship: y=a+b*x, where y is the result (inter-molar distance "AvgB66" or inter-canine distance "Cusp 33"), and x the specific tooth. The a and b respectively represent the intercept (point of intersection between the line and the y axis) and the slope of the line that describes the regression ratio. Results: The statistical analysis highlights a significant correlation (p<1%) between the results of the mesio-distal measurements of each tooth and the two variables considered to define the size of each arch ("AvgB66" and "Cusp 33"). Based on these results, a numerical relationship "y=a+b*x" has been extrapolated. Thus, it is possible to calculate the estimated inter-molar or inter canine distance necessary to have the teeth aligned. Conclusion: The inter-canine and inter-molar distances can be estimated starting from measuring the mesio-distal diameter of a single tooth.
Sujets)
Humains , Orthodontie , Arcade dentaire , Malocclusion dentaire/étiologie , Molaire/anatomie et histologie , Modèles linéaires , ItalieRésumé
ABSTRACT Objective: To analyze and compare the stiffness of different lingual appliances with different archwires. Material and Methods: The three-point bending test was used to analyze the stiffness of the lingual archwires for the different lingual systems: eBrace, Harmony, Incognito, and STb. The deflection load curve of each archwire was obtained to evaluate how the section, the material and the manufacturer affect the elasticity and stiffness characteristics of the wires. The comparison of the stiffness between different systems was carried out through a factor variance analysis with three factors (manufacturer, cross-section, and material), followed by the post-hoc Tuckey test. Results: An increase in the system's rigidity was reported as the wire section increases, regardless of the manufacturer. The stainless steel archwires have ever higher stiffness values than NiTi and TMA. The STb wires of CuNiTi material, by virtue of the characteristics of the thermal wires, have flatter and lower load-deflection curves than the NiTi wires of other manufacturers. Conclusion: Archwires section and material showed a significant influence on the stiffness of the lingual systems. Archwires of the same section and material but different manufacturers show different load-deflection curves of stiffness.
Sujets)
Appareils orthodontiques , Fils orthodontiques , Techniques in vitro/méthodes , Brackets orthodontiques , Analyse de variance , ItalieRésumé
ABSTRACT Objective: To evaluate how the lower arch spontaneously change after upper rapid palatal expansion in a group of patients with transversal skeletal deficit. Material and Methods: Twenty-four patients treated by the same orthodontist with a rapid palatal expander (RPE) bounded on a deciduous molar have been selected. The sample was divided into two groups: no treatment was provided for group one, while group two was treated using a lip bumper or Schwarz appliance. For each patient, dental casts were collected when the RPE was bounded (T0) and at the end of treatment, 9 months ± 3 months later (T1). Each outcome was analyzed, providing descriptive statistics, main effects significance tests and post-hoc analyses with the objective to evaluate the variations between pre-treatment (TO) and post-treatment (T1) of each of them. Results: If the linear measurements are considered, a significant beneficial effect on both arches is observed. However, the upper arch always shows a major increase of all values at T1 with respect to the lower arch. Even though the post-hoc tables indicate that time differences are all statistically significant across considered partitions, the lower arch's increase is more pronounced in group two, where patients were treated in both arches. If the angular measurements are concerned, the increase of lingual crown inclination was found in all patients, independently from the type of treatment in lower arch. Conclusion: All patients show normalization of upper diameters, regardless of whether the lower arch was treated or not.
Sujets)
Humains , Mâle , Femelle , Orthodontie , Technique d'expansion palatine/instrumentation , Appareils de traction extraorale , Orthodontistes , Malocclusion de classe III , Études prospectives , Statistique non paramétrique , ItalieRésumé
ABSTRACT Objective: To assess the scientific evidence on direct and indirect bonding techniques to analyse the differences related to treatment time, number of appointments and number of bracket detachments. Material and Methods: The MEDLINE and Cochrane Library databases were searched through to March 2021. Reference lists from the retrieved publications were also examined. The following article types that described data on the different types of direct and indirect bonding techniques in orthodontics were included: prospective and retrospective cohort studies, case-control studies and randomized controlled clinical trials (RCCTs). Two review authors independently assessed eligibility, extracted data, and ascertained the quality of the studies. Results: The search strategy initially resulted in 824 articles, and after a careful selection comprising the inclusion criteria, 12 articles were picked for the final review, specifically 2 cohort studies, 4 case-control studies and 6 RCCTs. The methodological quality was low in 4 studies, medium in 2, and high in 6 articles. Conclusion: The evidence currently available suggests that the use of computer-aided bonding is related to a reduction in treatment time and the number of appointments compared to direct and manual indirect bonding. However, the total bonding time for computer-aided bonding technique, including digital bracket placement, was longer than for direct bonding. Further high-quality RCTs on the differences between direct and indirect bonding are necessary to determine more precise data, as well as additional advantages and disadvantages.
Sujets)
Collage dentaire/instrumentation , Brackets orthodontiques , Matériaux dentaires , Méthodes , Études rétrospectives , ItalieRésumé
ABSTRACT Objective: To evaluate the accuracy of Virtual Surgical Planning (VSP) comparing VSPs and post-operative CBCT scans in patients undergoing bimaxillary orthognathic surgery of severe Skeletal Class III malocclusion. Material and Methods: Twenty-three patients (9 males and 14 females, mean age 24.1 ± 7.0 years) were selected and submitted to bimaxillary orthognathic surgery. Pre-operative VSPs and post-operative CBCTs were compared using both linear (taking into account four skeletal and six dental landmarks, each one described by the respective coordinates) and angular measures (seven planes in total). The threshold discrepancies for post-operative clinical acceptable results were set at ≤2 mm for liner and ≤4° for angular discrepancies. The mean difference values and its 95% confidence interval were identified, comparing which planned and which obtained in absolute value. Results: There were significant statistical differences for all absolute linear measures investigated, although only two overcome the linear threshold value of 2mm in both X and Y-linear dimensions. Linear deviations in Z-linear dimension do not reach statistical significance. All 12 angular measures reach the statistical significance, although none overcome the threshold angular value of 4°. Angular deviation for roll register the higher accuracy in contrast to pitch and yaw. Conclusion: Virtual surgical planning is a reliable planning method to be used in orthognathic surgery field; as a matter of fact, although some discrepancies between the planned on the obtained are evident, most of them meet the tolerability range.
Sujets)
Humains , Mâle , Femelle , Adulte , Sujet âgé , Études épidémiologiques , Études rétrospectives , Chirurgie orthognathique , Malocclusion dentaire/anatomopathologie , Malocclusion de classe III/anatomopathologie , Interprétation statistique de données , ItalieRésumé
ABSTRACT Objective: To obtain reference values for tip, torque and in-out from digital models of Italian and Mozambican subjects in ideal occlusion using a repeatable and validated method and to compare these measurements with previously reported values. Material and Methods: Dental parameters were acquired from digital models of each subject, categorized to one of two groups: Italians (23 males, 27 females; mean age 28.3 years, ±5.7 years) and Mozambicans (14 males, 15 females; mean age, 23.4 years, ±5.9), using VAM software. All subjects had ideal occlusion, permanent dentition and no previous orthodontic treatment, fillings or prostheses. After normality of data was assumed (p<0.05), a paired t-test was performed to detect any statistical differences between the two groups (p<0.05). Then, classical inference (t-test and power analysis) was used to compare our data to those reported by other authors. Results: Mozambicans' incisors were more proclined, while their upper molars appeared to be more prominent regarding Italians'. Italians shown greater tip values, especially at the upper first premolars and lower first molars. In-out values were comparable between the two groups, except for the upper molars (more prominent in Mozambicans) and lower first molar (more prominent in Italians). Unlike other reports, upper second molars displayed negative tip in our samples. Conclusion: Pre-adjusted appliances with standard prescription should not be expected to guarantee optimal outcomes. Prescriptions specific for ethnicities are recommended and reference values should be reconsidered.
Sujets)
Humains , Mâle , Femelle , Adolescent , Adulte , Appareils orthodontiques , Denture permanente , Moment de torsion , Occlusion dentaire , Italie , Mozambique , Orthodontie , Statistique non paramétriqueRésumé
ABSTRACT Objective: To exploit 3D measurement technology to determine any correlation between neonatal palate morphology and occlusal outcomes at five years in patients receiving surgery for unilateral cleft lip and palate (CLP). Material and Methods: Twenty-nine neonatal and 5-year models treated by the same surgeon using the same protocol for CLP correction were scanned using a high-resolution structured-light scanner and stored in stl format. Dedicated software was used to make linear and surface area measurements on the neonatal models, and each digitized 5-year model was assigned a Five-Year-Old (5YO) index score on three separate occasions by the same investigator. Results: Minimum, maximum, mean, standard deviation and standard error were calculated for each variable considered, and the Pearson coefficient was used to identify any correlations between neonatal variables and 5YO scores. Linear regression analysis showed that the only variable to approach significance was the posterior width of the cleft, which showed an R2 equal to 0.111, indicating that it accounts for 11% of the variability of the 5YO index. There was no other appreciable correlation between linear measurements, surface areas, or their inter-relationships. Conclusion: There is no correlation between neonatal morphological characteristics and occlusal outcomes at 5 years in CLP patients treated via the surgical protocol considered.