Preparation and in vitro evaluation of fused deposition modeling 3D printed compound tablets of captopril and hydrochlorothiazide / 北京大学学报(医学版)

OBJECTIVE@#To explore the feasibility of preparing compound tablets for the treatment of hypertension by fused deposition modeling (FDM) 3D printing technology and to evaluate the quality of the printed compound tablets in vitro.@*METHODS@#Polyvinyl alcohol (PVA) filaments were used as the exci-pient to prepare the shell of tablet. The ellipse-shaped tablets (the length of major axes of ellipse was 20 mm, the length of the minor axes of ellipse was 10 mm, the height of tablet was 5 mm) with two separate compartments were designed and printed using FDM 3D printer. The height of layer was 0.2 mm, and the thickness of roof or floor was 0.6 mm. The thickness of shell was 1.2 mm, and the thickness of the partition wall between the two compartments was 0.6 mm. Two cardiovascular drugs, captopril (CTP) and hydrochlorothiazide (HCT), were selected as model drugs for the printed compound tablet and filled in the two compartments of the tablet, respectively. The microscopic morphology of the tablets was observed by scanning electron microscopy (SEM). The weight variation of the tablets was investigated by electronic scale. The hardness of the tablets was measured by a single-column mechanical test system. The contents of the drugs in the tablets were determined by high performance liquid chromatography (HPLC), and the dissolution apparatus was used to measure the in vitro drug release of the tablets.@*RESULTS@#The prepared FDM 3D printed compound tablets were all in good shape without printing defects. The average weight of the tablets was (644.3±6.55) mg. The content of CTP and HCT was separately (52.3±0.26) mg and (49.6±0.74) mg. A delayed in vitro release profile was observed for CTP and HCT, and the delayed release time for CTP and HCT in vitro was 20 min and 40 min, respectively. The time for 70% of CTP and HCT released was separately 30 min and 60 min.@*CONCLUSION@#CTP and HCT compound tablets were successfully prepared by FDM 3D printing technology, and the printed tablets were of good qualities.

Preparation and in vitro evaluation of fused deposition modeling 3D printed verapa-mil hydrochloride gastric floating formulations / 北京大学学报(医学版)

OBJECTIVE@#To explore the feasibility of preparing gastric floating formulations by fused de-position modeling (FDM) 3D printing technology, to evaluate the in vitro properties of the prepared FDM 3D printed gastric floating formulations, and to compare the influence of different external shapes of the formulation with their in vitro properties.@*METHODS@#Verapamil hydrochloride and polyvinyl alcohol (PVA) were used as the model drug and the excipient, respectively. The capsule-shaped and hemisphere-shaped gastric floating formulations were then prepared by FDM 3D printing. The infill percentages were 15%, the layer heights were 0.2 mm, and the roof or floor thicknesses were 0.8 mm for both the 3D printed formulations, while the number of shells was 3 and 4 for capsule-shaped and hemisphere-shaped formulation, respectively. Scanning electron microscopy (SEM) was used to observe the morpho-logy of the surface and cross section of the formulations. Gravimetric method was adopted to measure the weights of the formulations. Texture analyzer was employed to evaluate the hardness of the formulations. High performance liquid chromatography method was used to determine the drug contents of the formulations. The in vitro floating and drug release behavior of the formulations were also characterized.@*RESULTS@#SEM showed that the appearance of the FDM 3D printed gastric floating formulations were both intact and free from defects with the filling structure which was consistent with the design. The weight variations of the two formulations were relatively low, indicating a high reproducibility of the 3D printing fabrication. Above 800.0 N of hardness was obtained in two mutually perpendicular directions for the two formulations. The drug contents of the two formulations approached to 100%, showing no drug loss during the 3D printing process. The two formulations floated in vitro without any lag time, and the in vitro floating time of the capsule-shaped and hemisphere-shaped formulation were (3.97±0.41) h and (4.48±0.21) h, respectively. The in vitro release of the two formulations was significantly slower than that of the commercially available immediate-release tablets.@*CONCLUSION@#The capsule-shaped and hemisphere-shaped verapamil hydrochloride gastric floating formulations were prepared by FDM 3D printing technology successfully. Only the floating time was found to be influenced by the external shape of the 3D printed formulations in this study.

Preparation and characterization of citric acid-modified superparamagnetic iron oxide nanoparticles / 北京大学学报(医学版)

OBJECTIVE@#To prepare and characterize citric acid (CA)-modified super paramagnetic iron oxide nanoparticles (SPIONs) for magnetic targeting, hyperthermia and magnetic resonance imaging (MRI).@*METHODS@#CA-modified SPIONs (CA-SPIONs) were prepared by co-precipitation method and then the magnetic responsiveness, morphology, particle size, infrared feature, weight percentage of CA, magnetic property and X-ray diffraction pattern of CA-SPIONs were respectively characterized by magnet, transmission electron microscope, laser particle size analyzer, Fourier transform infrared (FT-IR) spectroscopy, thermogravimetry-differential thermal analyzer, vibrating sample magnetometer and X-ray diffractometer (XRD). The heating efficiency of the CA-SPIONs was investigated by a high frequency induction heater. The transverse relaxivity (r2) of the CA-SPIONs was evaluated by a 3.0 T MRI scanner.@*RESULTS@#The CA-SPIONs prepared were dispersed well in water with a dark black color and had good magnetic responsiveness. The CA-SPIONs were spherical in shape and uniform in size with an average size around 12 nm. The hydrodynamic average size of the CA-SPIONs was (72.35±4.47) nm with a polydispersity index of 0.231 ± 0.029. The result of infrared spectrum indicated that CA was successfully modified to the surface of SPIONs. The result of thermogravimetric analysis showed that the weight percentage of CA modified on the CA-SPIONs was 9.0%. The result of magnetic property evaluation demonstrated that the CA-SPIONs exhibited excellent superparamagetism with a saturation magnetism of 63.58 emu/g. The XRD result indicated that the CA-SPIONs were in inverse spinel structure. The crystallite size of the CA-SPIONs was calculated to be 12.4 nm by Debye-Scherrer equation. Under the high frequency alternating electromagnetic field with electric current of 9 A and frequency ranging from 45 to 50 kHz, the CA-SPIONs exhibited excellent heating efficiency and the specific absorption rate (SAR) value was calculated to be 26 W/g. The r2 of the CA-SPIONs was assessed to be 338 (mmol/L)-1×s-1 by a 3.0 T MRI scanner, which suggested the excellent negative contrast enhancement effect of the CA-SPIONs.@*CONCLUSION@#The CA-SPIONs are expected to be used as a promising agent for magnetic targeting, hyperthermia and MRI detection.

Preparation and evaluation of blank and doxorubicin loaded poly (acrylic acid) microspheres for embolization / 北京大学学报(医学版)

OBJECTIVE@#To prepare ion exchange doxorubicin-loaded poly (acrylic acid) microspheres (DPMs) and evaluate the properties of these chemoembolic agents.@*METHODS@#Poly (acrylic acid) microspheres (PMs) without drug were prepared by inverse suspension polymerization method and then doxorubicin was loaded by ion exchange mechanism to prepare DPMs. Optical microscope was used to investigate the morphology and particle size distribution of PMs and DPMs; fluorescence microscope and confocal microscope were used to observe the distribution of doxorubicin after drug loading. Elasticities of both the microspheres were evaluated by texture analyzer. High performance liquid chromatography (HPLC) method was established to determine the drug loading behavior of PMs and releasing behavior of DPMs. The in vivo embolic property was evaluated by embolizing the hepatic artery of a rabbit with 0.1 mL of DPMs.@*RESULTS@#PMs and DPMs were both spherical in shape, smooth in surface and dispersed well. Doxorubicin was mainly in the outer area inside of DPMs and distributed evenly. The average particle size of PMs and DPMs were (283±136) μm and (248±149) μm, respectively. PMs and DPMs both had good compression ability with the Young's modulus of (62.63±1.65) kPa and (93.94±1.10) kPa separately. PMs reached the drug loading balance at 12 h, and the entrapment efficiency was greater than 99%. Drug loading of PMs in doxorubicin solution at the concentration of 5.0 g/L and 12.5 g/L was (19.78±0.27) g/L and (49.45±0.37) g/L, respectively. Doxorubicin released slowly from DPMs in PBS and the accumulative release percentages of DPMs with corresponding drug loading were 6.82%±0.02% and 2.83%±0.10% after 24 h, respectively. Arterial angiograms showed that the hepatic artery of the rabbit was successfully embolized with DPMs.@*CONCLUSION@#DPMs with good performance of loading doxorubicin could be a potential embolic agent for transcatheter arterial chemoembolization.

Studies on pulsatile release tablets of diltiazem hydrochloride in explosion way / 药学学报

<p><b>AIM</b>To investigate the preparation of pulsatile release tablets, the release of the drug in vitro and the pharmacokinetics in vivo.</p><p><b>METHODS</b>Diltiazem hydrochloride (DIL) was used as model drug. The pulsatile release tablets were prepared by film-coated method using ethylcellulose and Eudragit L. The effect of formulation on pulsatile release of diltiazem hydrochloride was investigated under release rate test. The mechanism of pulsatile release of drug was proved by the test of water-uptake. The pharmacokinetic and bioavailability study in eight human subjects was performed by HPLC method.</p><p><b>RESULTS</b>The release of diltiazem hydrochloride effected by the formulation of the core tablets and the composition and thickness of the coating film. In vitro, the delayed-release time T10 was 4.4 h, the maximum release time Trm was 8.0 h and the pulsed-release time Trm-10 was 3.6 h. In vivo, the delayed-release time Tlag was 4.9 h, the peak time was 8.0 h and the pulsed-release time was 3.1 h. The relative bioavailability was 105%.</p><p><b>CONCLUSION</b>The release of drug from pulsatile release tablets of diltiazem hydrochloride was shown to be in pulsed way both in vitro and in vivo.</p>