Résumé
ObjectiveTo investigate the effects of Aconiti Coreani Radix and Typhonii Rhizoma on the urinary metabolites of gerbils with stroke by non-targeted metabolomics technique, and then to clarify the mechanism of the two, as well as their similarities and differences. MethodTwenty-four gerbils were randomly divided into control group(CG), model group(MG), Aconiti Coreani Radix group(RA) and Typhonii Rhizoma group(RT). Except for the CG, ischemic stroke model was constructed using right unilateral ligation of gerbil carotid artery in the remaining groups. Except for the CG and MG, rats in the other groups received whole powder suspension(0.586 mg·g-1) was administered for 14 days. The neurological deficit in each group was scored by Longa scoring on days 0, 3, 7 and 14. After the end of administration, the serum, brain tissue and urine of gerbils in each group were collected, and the rate of cerebral infarction was detected by 2,3,5-triphenyltetrazolium chloride(TTC), and the levels of interleukin(IL)-6, tumor necrosis factor(TNF)-α, malondialdehyde(MDA), superoxide dismutase(SOD), glutathione(GSH), and nitric oxide(NO) in serum and brain tissue were determined by enzyme-linked immunosorbent assay(ELISA). The urine metabolomics of gerbils in each group was studied by ultra performance liquid chromatography-quadrupole-electrostatic field orbitrap high resolution mass spectrometry(UPLC-Q-Orbitrap-MS), and the data were processed by multivariate statistical analysis, and differential metabolites were screened based on value of variable importance in the projection(VIP) of the first principal component>1 and t-test P<0.05. Metabolic pathway analysis of the screened differential metabolites was performed using Kyoto Encyclopedia of Genes and Genomes(KEGG) database and Metaboanalyst 5.0. ResultCompared with the CG, the neurological deficit score was significantly increased in the MG(P<0.05), compared with the MG, the neurological deficit scores in the RA and RT were significantly reduced after 7 d and 14 d(P<0.05). Compared with the CG, the rate of cerebral infarction was significantly increased in the MG(P<0.05), compared with the MG, the rates of cerebral infarction in the RA and RT were significantly reduced(P<0.05). Compared with the CG, the levels of IL-6, TNF-α, and MDA in the serum and brain tissue of gerbils from the MG were significantly increased(P<0.05), and the levels of SOD, GSH and NO were significantly reduced(P<0.05). Compared with the MG, Aconiti Coreani Radix and Typhonii Rhizoma could down-regulate the levels of IL-6, TNF-α and MDA, and up-regulated the levels of SOD, GSH and NO. A total of 112 endogenous differential metabolites were screened by urine metabolomics, of which 16 and 26 metabolites were called back by Aconiti Coreani Radix and Typhonii Rhizoma, and could be used as potential biomarkers for both treatments in stroke gerbils, respectively. The results of the pathway analysis showed that both Aconiti Coreani Radix and Typhonii Rhizoma had regulatory effects on arginine and proline metabolism, pyrimidine metabolism, and aminoacyl-tRNA biosynthesis. In addition, Aconiti Coreani Radix could also regulate riboflavin metabolism, Typhonii Rhizoma could also regulate purine metabolism, glycine, serine and threonine metabolism, arachidonic acid metabolism, biosynthesis of pantothenate and coenzyme A, and β-alanine metabolism. ConclusionBoth Aconiti Coreani Radix and Typhonii Rhizoma have better therapeutic effects on stroke, with Aconiti Coreani Radix having stronger effects. From the metabolomics results, the main metabolic pathways regulated by Aconiti Coreani Radix involve amino acid metabolism, oxidative stress and so on, while Typhonii Rhizoma mainly involve amino acid metabolism, lipid metabolism, energy metabolism, etc.
Résumé
Aim To analyze the differences in plasma biomarkers and metabolic pathways between Atractylodes chinensis and Atractylodes coreana after intervention in spleen deficiency rats, and discuss the spleen strengthening mechanism of the two from a non targeted metabolomics perspective. Methods A spleen deficiency model was established in SD rats using a composite factor method of improper diet, excessive fatigue, and bitter cold diarrhea. To determine the content of gastrointestinal and immunological indicators, UHPLC-QE-MS technology was used, combined with principal component analysis (PC A) and orthogonal projections to latent structures-discriminant analysis (OPLS-DA) methods to search for biomarkers in plasma of spleen deficiency rats, and metabolic pathways were induced using the Pathway database. Results After administration of Atractylodes chinensis and Atractylodes coreana, various indicators in plasma of spleen deficiency rats showed varying degrees of regression. Metabolomics analysis showed that Atractylodes chinensis and Atractylodes coreana respectively recalled 70 and 82 plasma differential metabolites. Atractylodes chinensis mainly regulated two metabolic pathways : "Glycine, serine, and threonine metabolism, and "Thiamine metabolism". Atractylodes coreana mainly regulated five metabolic pathways, "Glycine, serine, and threonine metabolism", "Thiamine metabolism, "Pyrimidine metabolism", "Butanoate metabolism", and "Riboflavin metabolism". Conclusions Both Atractylodes chinensis and Atractylodes coreana have certain regulatory effects on spleen deficiency rats, and their mechanism of action may be related to regulating metabolic pathways such as "Glycine, serine, and threonine metabolism, and "Thiamine metabolism"in spleen deficiency.
Résumé
ObjectiveTo clarify the differences in the efficacy and mechanism of different processed products of Atractylodes chinensis rhizoma by the pharmacodynamics and metabolomics studies of raw, bran-fried and rice water-processed products on rats with spleen deficiency. MethodSixty male SD rats were randomly divided into blank group, model group, raw product group(3.75 g·kg-1), bran-fried product group(3.75 g·kg-1), rice water-processed product group(3.75 g·kg-1) and Shenling Baizhusan group(6.7 g·kg-1), with 10 rats in each group. The method of excessive fatigue+improper diet was used to establish a spleen deficiency model in rats. After the end of modeling, except for the blank and model groups, each dosing group was given the corresponding drug suspension, the immune organ coefficients of each group of rats were examined, the levels of interleukin-6(IL-6), tumor necrosis factor-α(TNF-α), immunoglobulin G(IgG), amylase(AMS), motilin(MTL), gastrin(GAS), Na+-K+-adenosine triphosphatase(ATPase), aquaporin 2(AQP2), AQP3 and AQP8 in rats were measured by enzyme-linked immunosorbent assay(ELISA). Ultra high performance liquid chromatography-quadrupole-time-of-flight tandem mass spectrometry(UPLC-Q-TOF-MS) combined with orthogonal partial least squares-discriminant analysis(OPLS-DA) were used to search for biomarkers in the plasma samples of spleen-deficient rats by using two criteria[P<0.05 and variable importance in the projection(VIP) value>1], and to compare the different modulatory effects of the three decoction pieces on the splenic-deficient biomarkers, and metabolic pathway analysis was conducted through the Kyoto Encyclopedia of Genes and Genomes(KEGG) database. ResultCompared with the blank group, the thymus index and spleen index of rats in the model group were significantly decreased(P<0.05), the levels of IL-6, TNF-α, IgG and AQP2 were significantly increased(P<0.05), the levels of AMS, GAS, MTL, AQP3, AQP8 and Na+-K+-ATPase were significantly decreased(P<0.05). Compared with the model group, raw products, bran-fried products and rice water-processed products all increased thymus index and spleen index(P<0.05), decreased IL-6, TNF-α, IgG and AQP2 levels(P<0.05), and increased AMS, GAS, MTL, AQP3, AQP8 and Na+-K+-ATPase levels to different degrees. A total of 176 differential metabolites were screened in the model group compared with the blank group, of which 75, 72 and 84 biomarkers were called back by the raw products, bran-fried products and rice water-processed products, respectively(P<0.05, P<0.01). Raw products of A. chinensis rhizoma mainly affected glycine, serine and threonine metabolism. Bran-fried products mainly affected alanine, aspartate and glutamate metabolism, D-arginine and D-ornithine metabolism. Rice water-processed products mainly affected glycine, serine and threonine metabolism, alanine, aspartate and glutamate metabolism, citrate cycle, thiamine metabolism, D-arginine and D-ornithine metabolism. ConclusionRaw products, bran-fried products and rice water-processed products of A. chinensis rhizoma all have good spleen strengthening effects, among which the effects of bran-fried products and rice water-processed products were stronger. Meanwhile, raw products has the strongest dryness, followed by bran-fried products, and the weakest dryness of rice water-processed products. The three decoction pieces are able to significantly modulate metabolic abnormalities in spleen-deficient rats, and the mechanism may be related to amino acid metabolism such as glycine, serine and threonine metabolism as well as alanine, aspartate and glutamate metabolism.
Résumé
OBJECTIVE@#To investigate the anti-coronavirus potential and the corresponding mechanisms of the two ingredients of Reduning Injection: quercetin and luteolin.@*METHODS@#A pseudovirus system was designed to test the efficacy of quercetin and luteolin to inhibit SARS-CoV-2 infection and the corresponding cellular toxicity. Luteolin was tested for its activities against the pseudoviruses of SARS-CoV-2 and its variants. Virtual screening was performed to predict the binding sites by Autodock Vina 1.1.230 and PyMol. To validate docking results, surface plasmon resonance (SPR) was used to measure the binding affinity of the compounds with various proteins of the coronaviruses. Quercetin and luteolin were further tested for their inhibitory effects on other coronaviruses by indirect immunofluorescence assay on rhabdomyosarcoma cells infected with HCoV-OC43.@*RESULTS@#The inhibition of SARS-CoV-2 pseudovirus by luteolin and quercetin were strongly dose-dependent, with concentration for 50% of maximal effect (EC50) of 8.817 and 52.98 µmol/L, respectively. Their cytotoxicity to BHK21-hACE2 were 177.6 and 405.1 µmol/L, respectively. In addition, luetolin significantly blocked the entry of 4 pseudoviruses of SARS-CoV-2 variants, with EC50 lower than 7 µmol/L. Virtual screening and SPR confirmed that luteolin binds to the S-proteins and quercetin binds to the active center of the 3CLpro, PLpro, and helicase proteins. Quercetin and luteolin showed over 99% inhibition against HCoV-OC43.@*CONCLUSIONS@#The mechanisms were revealed of quercetin and luteolin inhibiting the infection of SARS-CoV-2 and its variants. Reduning Injection is a promising drug for COVID-19.
Sujets)
Humains , SARS-CoV-2 , COVID-19 , Lutéoline , QuercétineRésumé
Pathological diagnosis of lung cancer keep updating and developing, in order to meet the clinical needs in the era of precision medicine. It mainly involves the advances of histological subtype classification, molecular testing for targeted therapy, biomarkers detection for immunotherapy and the pathological evaluation for neoadjuvant therapy. Nowadays, pathological diagnosis of lung cancer present a multidisciplinary model including clinical medicine, radiology and pathology. It is gradually moving towards standardization with expection to provide better guidance for clinical treatment and prognosis.
Sujets)
Humains , Tumeurs du poumon/traitement médicamenteux , Pronostic , ImmunothérapieRésumé
Probe electrospray ionization (PESI) is one of the typical types of ambient ionization technology, but its application in quantitative analysis is limited due to its poor sampling stability. Previously, we developed a new micro-pen electrospray ionization tandem mass spectrometry (μPen-ESI-MS/MS) method based on PESI. In this study, a μPen-ESI-MS/MS method to measure testosterone and dextromethorphan in liver microsome samples was developed and validated to further applicate in evaluating drug metabolism stability and CYP450 enzyme activity. A μPen-ESI-MS/MS method for detecting the CYP3A4 substrate testosterone and CYP2D6 substrate dextromethorphan in the liver microsome incubation system were developed, and the linearity, precision and accuracy of the method was validated. The validated method was further used to detect the metabolic stability of testosterone in the liver microsome incubation system. The results showed that the μPen-ESI-MS/MS had high efficiency with 0.3 min spraying time of each sample. The standard curve of the testosterone and dextromethorphan has good linearity (R2 > 0.99), the intra- and inter-batch accuracy of testosterone and dextromethorphan was 95.9%-109.3% and 90.5%-107.3%, respectively; the intra- and inter-batch precision was acceptable with RSD values of 2.4%-13.5% and 3.4%-12.1%. The half-lives of testosterone and dextromethorphan in the liver microsome incubation system were 12 min and 14 min, respectively. This study provided a rapid and sensitive μPen-ESI-MS/MS method for the assay of testosterone and dextromethorphan in liver microsome samples, and provided a new strategy for the evaluation of drug metabolism stability and CYP3A4/CYP2D6 activity.
Résumé
Decompression and curettage can result are effective as treatments for large jaw cysts, which are common diseases in the clinic. Based on a treatment used in a previous study, this paper proposes a "three-step method" to treat large jaw cyst and repair the bone defect by decompression, curettage, and autologous dental bone powder implantation. This paper introduces the processes and key points of the operation involved in the abovementioned method.
Sujets)
Humains , Ciments osseux , Kystes osseux , Chirurgie générale , Transplantation osseuse , Curetage , Kystes de la mâchoireRésumé
Objective: To establish HPLC fingerprints of Qiwei Tangmaishu tablet and simultaneously determine the contents of the six constituents, acteoside, martynoside, calycosin 7-O-β- D-glucopyranoside, schisandrin, formononetin and deoxyschizan- drin. Methods: The analysis of 50% methanol extract of this drug was performed on a 30℃ thermostatic Waters Symmetry C18 column, with the mobile phase comprising of acetonitrile(A)-0.2% formic acid solution(B)flowing at 1.0 ml/min in a gradient elution manner. The detection wavelength was set at 330 nm for acteoside and martynoside, 254 nm for calycosin 7-O-β-D-glucopyranoside, schisandrin, formononetin and deoxyschizandrin. Results: There were thirteen common peaks in the fingerprints of ten batches of samples with the similarities more than 0.9. Acteoside, martynoside, calycosin 7-O-β-D-glucopyranoside, schisandrin, formononetin and deoxyschizandrin showed good linear relationship within the ranges of 1.47-36.75, 0.66-16.50, 0.89-22.25, 2.58-64.50, 1.91-47.75 and 0.77-19.25 μg/ml(r≥0.9993), and their average recoveries were 97.57%, 99.22%, 96.69%, 100.01%, 98.79% and 96.77%, with the RSD of 0.79%, 1.54%, 0.61%, 0.64%, 0.83% and 0.36%, respectively. Conclusion: The established method is easily operable and repeatable, which could be used for quality control of Qiwei Tangmaishu tablet.
Résumé
BACKGROUND@#In recent years, a number of clinical trials have shown that immunocheckpoint inhibitors (ICI) have brought survival benefits to patients with advanced non-small cell lung cancer (NSCLC), however, such clinical trials comprise cohorts selected based on strict and complex entry and exclusion criteria, and the results cannot fully reflect the real world situation. The purpose of this study was to investigate the clinical efficacy and safety of immunotherapy in the real world, as well as possible prognostic factors.@*METHODS@#Patients with advanced NSCLC receiving immunotherapy in Beijing Chest Hospital from January 2017 to July 2019 were retrospectively collected, and the following information were collected: curative effect, progression-free surival (PFS) and adverse reactions. The occurrence of adverse reactions and clinical curative effect and prognosis factors that may be relevant were explored.@*RESULTS@#34 patients were enrolled in this study, median PFS was 5.66 months (95%CI: 4.48-6.84), grade 1-2 and 3-4 incidence of adverse events was 61.71% (22/34) and 14.71% (5/34), there were 3 patients (8.82%) experienced fatal immune related adverse events (irAE), 2 cases were immune associated pneumonia, 1 case was immune related myocarditis. Univariate analysis showed that tumor-node-metastasis (TNM) stage and metastatic site were correlated with median PFS (P<0.05), and multivariate analysis showed that patients with extrapulmonary metastasis (OR=6.42, P=0.029) and pleural metastasis (OR=14.14, P=0.006) had shorter median PFS.@*CONCLUSIONS@#In the real world, immunotherapy has good efficacy in patients with advanced NSCLC, but the incidence of severe irAE is also higher. Distant metastasis and pleural metastasis are poor prognostic factors for advanced NSCLC patients receiving immunotherapy.
Résumé
Objective • To explore the feasibility of applying customized guide, based on digital image processing and 3D printing technology, to bone biopsy. Methods • Eleven patients (6 males and 5 females; 7-69 years old, average age of 36 years) diagnosed with bone tumor from July 2017 to March 2018 in Shanghai Ninth People's Hospital were enrolled in this study. Routine CT and/or MRI data were taken as reference in designing the customized biopsy guide for 3D printing by Medraw Print software. Needle insertion points were set under the supervision of surgeons to avoid damaging important anatomical structures such as nerves and blood vessels. 3D printed customized guide was designed to match local surface. The success of the puncture was confirmed by X-ray or CT, and the accuracy of the puncture results was evaluated by the pathological results of resection operation as a reference standard. The complications were analyzed. Results • The 11 patients included 4 cases with neoplasms in femur, 3 cases in pelvis, 2 cases in tibia, 1 case in scapula and 1 case in metacarpal. The needling positions in operation were consistent with the preoperative virtual design, and the guide plates fitted perfectly to the body surface. The results of biopsy of 8 patients (88.9%) matched with the postoperative pathology, while another 2 patients did not receive bone tumor resection because of the benign biopsy. No complications were observed during or after the procedure. Conclusion • Customized guide by digital image processing and 3D printing may have a great value in improving the accuracy of preoperative tumor diagnosis and the effectiveness of its treatment.
Résumé
Objective: To observe the changes in numbers and degranulation status of local mast cells (MCs) of the complementary acupionts, as well as the concentrations of serum histamine and bradykinin after acupuncture at rat's complementary acupionts of Yanglingquan (GB 34) and Yinlingquan (SP 10), for exploring the mechanisms of the synergistic effect of complementary acupionts. Methods: Using random number table method, 40 Wistar rats were randomly divided into a blank control group (group K), an acupuncture at Yanglingquan (GB 34) group (group A), an acupuncture at Yinlingquan (SP 9) group (group B), an acupuncture at Yanglingquan (GB 34) and Yinlingquan (SP 9) group (group AB), and an acupuncture at points near Yanglingquan (GB 34) and Yinlingquan (SP 9) group (group CD), 8 rats in each group. Group A received acupuncture at Yanglingquan (GB 34); group B received acupuncture at Yinlingquan (SP 9); group AB received acupuncture at Yanglingquan (GB 34) and Yinlingquan (SP 9); group CD received acupuncture at the control points [points 3 mm away from Yanglingquan (GB 34) and Yinlingquan (SP 9) respectively]. Acupuncture was performed at bilateral points in each group. Rats in group K were fixed using the same method as rats in the other 4 groups without acupuncture stimulation. Needles of 0.35 mm in diameter and 40 mm in length were used for acupuncture. Needle handle was connected to the G6805-Ⅱ mode electroacupuncture (EA) device after needling qi was obtained, with sparse-dense wave, frequency of 2 Hz/100 Hz and current of 1 mA to keep the needle handles slightly tremulous while the rats kept quiet. Rats were continuously stimulated by EA for 20 min each time. Experimental interventions were conducted on the 1st, 3rd, 5th and 7th days when the experiment started, for 4 times in total. Specimens from rats in each group were collected 2 h after the 7th day. The levels of histamine and bradykinin in serum were detected by enzyme-linked immunosorbent assay (ELISA). Local tissues of the points were used to prepare cryosections. The changes of MCs were observed after toluidine blue staining. Results: Compared with group K, the numbers and degranulation rates of MCs in group A, group B, group AB and group CD were significantly increased (all P<0.05). The number and degranulation rate of MCs in group AB were significantly higher than those in group A, group B and group CD (all P<0.05). The order of histamine levels from high to low was: group AB >group B > group A > group CD > group K, and the differences were statistically significant (all P<0.05); the levels of bradykinin in group AB, group A and group B were significantly higher than those in group K and group CD (all P<0.05). There was no significant difference in the bradykinin level between group A and group B, nor between group CD and group K (all P>0.05). Conclusion: The number and degranulation rate of MCs of the complementary acupionts are significantly increased after acupuncture at complementary acupionts of Yanglingquan (GB 34) and Yinlingquan (SP 9) of rats, and the serum levels of histamine and bradykinin are increased, which may be one of the mechanisms of the synergism produced by the combination of complementary acupionts.
Résumé
Laser-induced breakdown spectroscopy (LIBS) was used for analysis of the distribution of S,Mn,Fe,Cr,Mo,Si,Al in a 34CrNiMo6 steel sample cut from a main shaft of wind driven generator.The MnS inclusion area in each ablation craters cover zone was extracted in the way of comparing the metallograph captured by optical microscopy before and after LIBS scanning ablation.The statistic relation between MnS inclusion area and signal intensity of S and Mn was analyzed.The result showed that the abnormal signal of S and Mn occurred at the same position with the existence of MnS inclusion,and their signal intensity showed linear relationship.The abnormal signal of S and Mn were triggered mainly by MnS inclusion.The statistic result also showed linear relationship between signal intensity and MnS inclusion area both for S and Mn.It was possible to determine the inclusion type,size and distribution by analyzing abnormal signal.A simplified ablation model was established to calculate the relation of S and Mn content to MnS inclusion area.The arithmetic result showed a linear relation between the content and MnS inclusion area both for S and Mn.The calculation confirmed the linear relationship between signal intensity and inclusion area observed in experiment.The linear relationship could be interfered by macro-segregation,micro-segregation,deviation in measuring inclusion area,and inclusion spatter in pre-ablation.
Résumé
Objective Objective To analyze the torque performance of lingual brackets with slots in different directions and the influence pattern of arch wires with different sizes and materials on torque of these lingual brackets.Methods The finite element models of the anterior maxilla lingual brackets with vertical and horizontal slot were constructed,using 3 kinds of materials (stainless steel,beta-titanium,nickel-titanium) and two sizes of arch wires (0.43 mm x 0.56 mm,0.41 mm x 0.56 mm),so as to compare and analyze their mechanical properties after the application of torque load on the left upper central incisors with a rotation angle of ±20°.Results With the increase in elastic modulus of the arch wire,torque moments of lingual brackets with horizontal and vertical slot both increased gradually.Torque performance of lingual brackets was affected more by the sizes and materials of arch wires than the directions of slots.The lingual bracket with vertical slot produced 1-2 times of torque force than that with horizontal slot under the same degree of torque angle.The effect of arch wire sizes was smaller than that of arch wire materials,while the synergistic change in sizes and materials of arch wires had the largest influence on torque performance of lingual brackets.Conclusions The torque performance of lingual bracket will be influenced with its different slot directions,the sizes and materials of arch wires.In clinical application,slot directions of lingual brackets as well as sizes and materials of arch wires should be adjusted properly according to the required torque force.
Résumé
<p><b>OBJECTIVE</b>The influence of anti-tuberculosis (TB) treatment history on tuberculous lymphadenitis (TBLN) diagnosis is unclear. Therefore, this study aims to evaluate the diagnostic methods, including histology, microbiology, and molecular tests, used for TBLN.</p><p><b>METHODS</b>In this study, suspected patients with TBLN and having different anti-TB treatment background were enrolled. All the samples were tested simultaneously by histology, Ziehl-Neelsen (ZN) staining, mycobacterial culture (culture), Xpert MTB/RIF (xpert), real-time PCR, and high-resolution melting curve PCR (HRM). Thereafter, the performance of these methods on samples with different anti-TB treatment background was assessed.</p><p><b>RESULTS</b>In our study, 89 patients were prospectively included 82 patients with TBLN and 7 with other diseases. The overall sensitivities of Xpert, real-time PCR, histology, ZN staining, and culture were 86.6%, 69.5%, 58.5%, 43.9%, and 22.0%, respectively. The anti-TB treatment history revealed dramatic influences on the sensitivity of culture (P < 0.0001). In fact, the treatment that lasted over 3 months also influenced the sensitivity of Xpert (P < 0.05). However, the treatment history did not affect the performance of remaining tests (P > 0.05). For rifampicin drug susceptibility test (DST), the anti-TB treatment showed only significant influence on the success rate of culture DST (P = 0.001), but not on those of Xpert and HRM tests (P > 0.05).</p><p><b>CONCLUSION</b>Other tests as well as culture should be considered for patients with TBLN having retreatment history or over 1-month treatment to avoid false negative results.</p>
Sujets)
Adolescent , Adulte , Sujet âgé , Femelle , Humains , Mâle , Adulte d'âge moyen , Jeune adulte , Antituberculeux , Utilisations thérapeutiques , Techniques bactériologiques , Résistance bactérienne aux médicaments , Tuberculose ganglionnaire , Diagnostic , Traitement médicamenteux , MicrobiologieRésumé
Objective To analyze the torque performance of lingual brackets with slots in different directions and the influence pattern of arch wires with different sizes and materials on torque of these lingual brackets. Methods The finite element models of the anterior maxilla lingual brackets with vertical and horizontal slot were constructed, including three kinds of materials (stainless steel, beta-titanium, nickel-titanium) and two sizes of arch wires (0.43 mm×0.56 mm, 0.41 mm×0.56 mm), so as to compare and analyze their mechanical properties after the application of torque load on the left upper central incisors with a rotation angle of ±20°. Results With the increase in elastic modulus of the arch wire, torque moments of lingual brackets with horizontal and vertical slot both increased gradually. Torque performance of lingual brackets was affected more by the sizes and materials of arch wires than the directions of slots. The lingual bracket with vertical slot produced 1-2 times of torque force than that with horizontal slot under the same degree of torque angle. The effect of arch wire sizes was smaller than that of arch wire materials, while the synergistic change in sizes and materials of arch wires had the largest influence on torque performance of lingual brackets. Conclusion The lingual brackets with different slot directions, sizes and materials of arch wires will influence the torque performance of lingual brackets. In clinical application, slot directions of lingual brackets as well as sizes and materials of arch wires should be adjusted properly according to the required torque force.
Résumé
Objective·To explore the value of applying CT/MRI image registration and fusion combined with 3D printing technique in pre-surgical planning of refractory pelvic tumors. Methods·A retrospective analysis was performed on the cases with refractory pelvic tumors admitted between March 2014 and December 2016 in Shanghai Ninth People's Hospital, Shanghai Jiao Tong University School of Medicine. CT/MRI examinations were performed as a routine pre-surgical procedure, and the resulting images were subject to rapid registration and fusion with the Medraw software in order to accurately determine the tumor boundaries and to be used as references in designing and making patient-specific tumor models, prostheses, and implants by 3D printing technique. Results·A total of 13 cases with refractory pelvic tumors were included in this study (8 cases of chondrosarcoma, 1 case of osteosarcoma with aneurysmal bone cyst, 1 case of dedifferentiated sarcoma, 1 case of fibrous connective tissue hyperplasia, 1 case of solitary fibrous tumor/hemangiopericytoma, and 1 case of metastatic squamous cell carcinoma) with an average age of (50.0±8.5) years. According to the Enneking classification,there were 2 cases in zone Ⅰ , 2 in zones Ⅰ + Ⅱ , 1 in zones Ⅱ + Ⅲ , 3 in zones Ⅰ + Ⅱ + Ⅲ , 1 in zones Ⅰ + Ⅱ + Ⅳ , 1 in zonesⅠ + Ⅱ + Ⅲ + Ⅳ , 1 in zones Ⅰ + Ⅳ , 1 in zones Ⅱ + Ⅳ , and 1 in zone Ⅳ. The mean maximal tumor diameter was (15.15±4.81) cm without implicating the pelvic blood vessels. Results from intraoperative frozen section at resection boundaries and the installation of prosthesis showed that the actual surgical procedure was consistent with the surgical planning based on the reported image fusion technique. Conclusion·CT/MRI image registration and fusion technique combined with 3D printing technique can accurately determine the resection boundary of pelvic tumors and assist in designing of individualized prosthesis model and surgical guide, which has a great value in pre-surgical planning and clinical treatment of refractory pelvic tumors.
Résumé
Objective·To explore the value of applying CT/MRI image registration and fusion combined with 3D printing technique in pre-surgical planning of refractory pelvic tumors. Methods·A retrospective analysis was performed on the cases with refractory pelvic tumors admitted between March 2014 and December 2016 in Shanghai Ninth People's Hospital, Shanghai Jiao Tong University School of Medicine. CT/MRI examinations were performed as a routine pre-surgical procedure, and the resulting images were subject to rapid registration and fusion with the Medraw software in order to accurately determine the tumor boundaries and to be used as references in designing and making patient-specific tumor models, prostheses, and implants by 3D printing technique. Results·A total of 13 cases with refractory pelvic tumors were included in this study (8 cases of chondrosarcoma, 1 case of osteosarcoma with aneurysmal bone cyst, 1 case of dedifferentiated sarcoma, 1 case of fibrous connective tissue hyperplasia, 1 case of solitary fibrous tumor/hemangiopericytoma, and 1 case of metastatic squamous cell carcinoma) with an average age of (50.0±8.5) years. According to the Enneking classification,there were 2 cases in zone Ⅰ , 2 in zones Ⅰ + Ⅱ , 1 in zones Ⅱ + Ⅲ , 3 in zones Ⅰ + Ⅱ + Ⅲ , 1 in zones Ⅰ + Ⅱ + Ⅳ , 1 in zonesⅠ + Ⅱ + Ⅲ + Ⅳ , 1 in zones Ⅰ + Ⅳ , 1 in zones Ⅱ + Ⅳ , and 1 in zone Ⅳ. The mean maximal tumor diameter was (15.15±4.81) cm without implicating the pelvic blood vessels. Results from intraoperative frozen section at resection boundaries and the installation of prosthesis showed that the actual surgical procedure was consistent with the surgical planning based on the reported image fusion technique. Conclusion·CT/MRI image registration and fusion technique combined with 3D printing technique can accurately determine the resection boundary of pelvic tumors and assist in designing of individualized prosthesis model and surgical guide, which has a great value in pre-surgical planning and clinical treatment of refractory pelvic tumors.
Résumé
Objective Objective To analyze the torque performance of lingual brackets with slots in different directions and the influence pattern of arch wires with different sizes and materials on torque of these lingual brackets.Methods The finite element models of the anterior maxilla lingual brackets with vertical and horizontal slot were constructed,using 3 kinds of materials (stainless steel,beta-titanium,nickel-titanium) and two sizes of arch wires (0.43 mm x 0.56 mm,0.41 mm x 0.56 mm),so as to compare and analyze their mechanical properties after the application of torque load on the left upper central incisors with a rotation angle of ±20°.Results With the increase in elastic modulus of the arch wire,torque moments of lingual brackets with horizontal and vertical slot both increased gradually.Torque performance of lingual brackets was affected more by the sizes and materials of arch wires than the directions of slots.The lingual bracket with vertical slot produced 1-2 times of torque force than that with horizontal slot under the same degree of torque angle.The effect of arch wire sizes was smaller than that of arch wire materials,while the synergistic change in sizes and materials of arch wires had the largest influence on torque performance of lingual brackets.Conclusions The torque performance of lingual bracket will be influenced with its different slot directions,the sizes and materials of arch wires.In clinical application,slot directions of lingual brackets as well as sizes and materials of arch wires should be adjusted properly according to the required torque force.
Résumé
Objective Objective To analyze the torque performance of lingual brackets with slots in different directions and the influence pattern of arch wires with different sizes and materials on torque of these lingual brackets.Methods The finite element models of the anterior maxilla lingual brackets with vertical and horizontal slot were constructed,using 3 kinds of materials (stainless steel,beta-titanium,nickel-titanium) and two sizes of arch wires (0.43 mm x 0.56 mm,0.41 mm x 0.56 mm),so as to compare and analyze their mechanical properties after the application of torque load on the left upper central incisors with a rotation angle of ±20°.Results With the increase in elastic modulus of the arch wire,torque moments of lingual brackets with horizontal and vertical slot both increased gradually.Torque performance of lingual brackets was affected more by the sizes and materials of arch wires than the directions of slots.The lingual bracket with vertical slot produced 1-2 times of torque force than that with horizontal slot under the same degree of torque angle.The effect of arch wire sizes was smaller than that of arch wire materials,while the synergistic change in sizes and materials of arch wires had the largest influence on torque performance of lingual brackets.Conclusions The torque performance of lingual bracket will be influenced with its different slot directions,the sizes and materials of arch wires.In clinical application,slot directions of lingual brackets as well as sizes and materials of arch wires should be adjusted properly according to the required torque force.
Résumé
Objective:To investigate the effect of different postoperative nutritional support on the gastrointestinal function and nutritional status in acute colon peforation patients.Methods:60 cases of acute emergency operation patients with perforation of the colon,according to the given nutritional support treatment of the different ways,were divided into enteral parenteral joint nutrition (EN + PN) group and total parenteral nutrition (TPN) group.Clinical therapeutic effects of two groups were compared.Results:The results of EN + PN group were significantly better than the those in TPN group (P < 0.05).Conclusion:EN + PN model can improve the postoperative nutritional status and accelerate the recovery of patients with acute colonic perforation.