RESUMO
The finite element method (FEM) is a mathematical method for obtaining approximate solutions to a wide variety of engineering problems. With the development of computer technology, it is gradually applied to the study of biomechanics of human body. The application of the combination of FEM and biomechanics in exploring the relationship between vascular injury and disease, and pathological mechanisms will be a technological innovation for traditional forensic medicine. This paper reviews the construction and development of human vascular FEM modeling, and its research progress on the vascular biomechanics. This paper also looks to the application prospects of FEM modeling in forensic pathology.
Assuntos
Humanos , Simulação por Computador , Modelos Biológicos , Fenômenos Biomecânicos , Análise de Elementos Finitos , Medicina LegalRESUMO
OBJECTIVES@#To explore the difference in CT values between pulmonary thromboembolism and postmortem clot in postmortem CT pulmonary angiography (CTPA) to further improve the application value of virtual autopsy.@*METHODS@#Postmortem CTPA data with the definite cause of death from 2016 to 2019 were collected and divided into pulmonary thromboembolism group (n=4), postmortem clot group (n=5), and control group (n=5). CT values of pulmonary trunk and left and right pulmonary artery contents in each group were measured and analyzed statistically.@*RESULTS@#The average CT value in the pulmonary thromboembolism group and postmortem clot group were (168.4±53.8) Hu and (282.7±78.0) Hu, respectively, which were lower than those of the control group (1 193.0±82.9) Hu (P<0.05). The average CT value of the postmortem clot group was higher than that of the pulmonary thromboembolism group (P<0.05).@*CONCLUSIONS@#CT value is reliable and feasible as a relatively objective quantitative index to distinguish pulmonary thromboembolism and postmortem clot in postmortem CTPA. At the same time, it can provide a scientific basis to a certain extent for ruling out pulmonary thromboembolism deaths.
Assuntos
Humanos , Autopsia , Trombose , Embolia Pulmonar/diagnóstico por imagem , Tomografia Computadorizada por Raios X , Angiografia , CadáverRESUMO
OBJECTIVES@#To survey the development status and actual needs of virtual autopsy technology in China and to clarify the applicability of forensic virtual autopsy laboratory accreditation.@*METHODS@#The questionnaire was set up included three aspects:(1) the current status of virtual autopsy technology development; (2) the accreditation elements such as personnel, equipment, entrustment and acceptance, methods, environmental facilities; (3) the needs and suggestions of practicing institutions. A total of 130 forensic pathology institutions were surveyed by online participation through the Questionnaire Star platform.@*RESULTS@#Among the 130 institutions, 43.08% were familiar with the characteristics of virtual autopsy technology, 35.38% conducted or received training in virtual autopsy, and 70.77% have establishment needs (including maintenance). Relevant elements were suitable for laboratory accreditation.@*CONCLUSIONS@#Virtual autopsy identification has gained social recognition. There is a demand for accreditation of forensic virtual autopsy laboratory. After the preliminary assessment, considering the characteristics and current situation of this technology, China National Accreditation Service for Conformity Assessment (CNAS) can first carry out the accreditation pilot of virtual autopsy project at large comprehensive forensic institutions with higher identification capability, and then CNAS can popularize the accreditation in a wide range when the conditions are suitable.
Assuntos
Autopsia , Medicina Legal , Patologia Legal , Acreditação , Inquéritos e QuestionáriosRESUMO
OBJECTIVES@#To explore the application value of virtual autopsy to obtain key evidence information on drowned corpses and its application value of virtual autopsy in the diagnosis of drowning.@*METHODS@#In this study, 7 corpses were selected as the research objects. The image data of corpses were collected by computed tomography (CT) before conventional autopsy. The characteristics of corpses were observed through image reading, combined with virtual measurement indexes, and compared with 15 non-drowned corpses.@*RESULTS@#The postmortem CT of drowning showed the more fluid in respiratory tract than the non-drowning, and ground-glass opacities in the lung. The statistical volume of fluid in the sinus (maxillary sinus and sphenoid sinus) was (10.24±4.70) mL in drowning cases and (2.02±2.45) mL in non-drowning cases. The average CT value of fluid in the sinus, left atrial blood and gastric contents in drowning cases were (15.91±17.20), (52.57±9.24) and (10.33±12.81) HU, respectively, which were lower than those in non-drowning cases (P<0.05).@*CONCLUSIONS@#The comprehensive consideration of multiple characteristic image manifestations and the virtual measurement indexes are helpful to the forensic pathological diagnosis of drowning. Virtual autopsy can be used as an auxiliary method in the forensic diagnosis of drowning.
Assuntos
Humanos , Autopsia/métodos , Cadáver , Afogamento/diagnóstico por imagem , Patologia Legal/métodos , Tomografia Computadorizada por Raios X/métodosRESUMO
OBJECTIVES@#To study the correlation between CT imaging features of acceleration and deceleration brain injury and injury degree.@*METHODS@#A total of 299 cases with acceleration and deceleration brain injury were collected and divided into acceleration brain injury group and deceleration brain injury group according to the injury mechanism. Subarachnoid hemorrhage (SAH) and Glasgow coma scale (GCS), combined with skull fracture, epidural hematoma (EDH), subdural hematoma (SDH) and brain contusion on the same and opposite sides of the stress point were selected as the screening indexes. χ2 test was used for primary screening, and binary logistic regression analysis was used for secondary screening. The indexes with the strongest correlation in acceleration and deceleration injury mechanism were selected.@*RESULTS@#χ2 test showed that skull fracture and EDH on the same side of the stress point; EDH, SDH and brain contusion on the opposite of the stress point; SAH, GCS were correlated with acceleration and deceleration injury (P<0.05). According to binary logistic regression analysis, the odds ratio (OR) of EDH on the same side of the stress point was 2.697, the OR of brain contusion on the opposite of the stress point was 0.043 and the OR of GCS was 0.238, suggesting there was statistically significant (P<0.05).@*CONCLUSIONS@#EDH on the same side of the stress point, brain contusion on the opposite of the stress point and GCS can be used as key indicators to distinguish acceleration and deceleration injury mechanism. In addition, skull fracture on the same side of the stress point, EDH and SDH on the opposite of the stress point and SAH were relatively weak indicators in distinguishing acceleration and deceleration injury mechanism.
Assuntos
Humanos , Contusão Encefálica , Lesões Encefálicas/diagnóstico por imagem , Hematoma Epidural Craniano , Hematoma Subdural/etiologia , Modelos Logísticos , Fraturas Cranianas/diagnóstico por imagem , Tomografia Computadorizada por Raios X , Ferimentos não Penetrantes/diagnóstico por imagemRESUMO
OBJECTIVES@#To apply the convolutional neural network (CNN) Inception_v3 model in automatic identification of acceleration and deceleration injury based on CT images of brain, and to explore the application prospect of deep learning technology in forensic brain injury mechanism inference.@*METHODS@#CT images from 190 cases with acceleration and deceleration brain injury were selected as the experimental group, and CT images from 130 normal brain cases were used as the control group. The above-mentioned 320 imaging data were divided into training validation dataset and testing dataset according to random sampling method. The model classification performance was evaluated by the accuracy rate, precision rate, recall rate, F1-value and AUC value.@*RESULTS@#In the training process and validation process, the accuracy rate of the model to classify acceleration injury, deceleration injury and normal brain was 99.00% and 87.21%, which met the requirements. The optimized model was used to test the data of the testing dataset, the result showed that the accuracy rate of the model in the test set was 87.18%, and the precision rate, recall rate, F1-score and AUC of the model to recognize acceleration injury were 84.38%, 90.00%, 87.10% and 0.98, respectively, to recognize deceleration injury were 86.67%, 72.22%, 78.79% and 0.92, respectively, to recognize normal brain were 88.57%, 89.86%, 89.21% and 0.93, respectively.@*CONCLUSIONS@#Inception_v3 model has potential application value in distinguishing acceleration and deceleration injury based on brain CT images, and is expected to become an auxiliary tool to infer the mechanism of head injury.
Assuntos
Humanos , Encéfalo/diagnóstico por imagem , Lesões Encefálicas , Aprendizado Profundo , Redes Neurais de ComputaçãoRESUMO
Objective Based on the theory of biomechanics, the finite element method was used to study the injury characteristics of different parts of brain hit by fist with different force and to predict the risk of craniocerebral injury, in order to provide reference for actual medical protection and forensic identification. Methods The finite element model of fist was constructed by using DICOM data modeling method and related software, and the effective mass and speed of fist were used to represent the kinetic energy of fist, and combined with human finite element model THUMS 4.02, the characteristics of craniocerebral injury caused by frontal and lateral blows were parametrically simulated. Results The probability of direct death from a blow to the head was low, but as fist power increased, so did the risk of craniocerebral injury. The characteristics of craniocerebral injury were also significantly different with the different fist hitting head locations. When the frontal area was attacked, the maximum equivalent stress of skull was 122.40 MPa, while that of brain tissue was 4.31 kPa. When the temporal area was attacked, the maximum equivalent stress of skull was 71.53 MPa, while that of brain tissue was 7.09 kPa. Conclusion The characteristics and risks of skull fracture and brain tissue injury are different when different parts of the brain are hit by fist. When the frontal area is hit, the risk of skull fracture is significantly higher than when the temporal area is hit. The risk of brain tissue injury is the opposite. The position with the highest probability of skull fracture is generally the place where the skull is directly impacted, and with the conduction of stress waves, it will spread to other parts of the skull, while the position with the highest risk of brain tissue injury is not the place where the brain is directly impacted.
Assuntos
Humanos , Fenômenos Biomecânicos , Traumatismos Craniocerebrais/etiologia , Análise de Elementos Finitos , Cabeça , Crânio , Fraturas Cranianas/etiologiaRESUMO
Objective To discuss the application value of CT scanning technology in cause of death determination of medical dispute cases. Methods From July 2017 to December 2018, postmortem CT imaging data of 12 medical dispute cases were collected. CT imaging diagnosis results and anatomy findings as well as differences between antemortem and postmortem CT diagnosis were compared. The advantages and disadvantages of CT routine tests of the cadavers in terms of the diagnosis of disease and damage were analyzed. Results The comparison between CT imaging diagnosis and anatomical findings showed that CT scans had advantages in the diagnosis of disease and damage with large differences in density changes, such as atelectasis, pneumonia, calcification, fracture and hemorrhage, etc. The comparison of CT diagnosis in antemortem and postmortem examination showed that the cadavers of medical dispute cases were well preserved and that postmortem CT scan was meaningful for the diagnosis of antemortem diseases. Conclusion Virtual anatomy technology has a relatively high application value in postmortem examination of medical dispute cases. It can provide effective information for the appraisers before the autopsy and can also provide a reference for cause of death analysis when the anatomy cannot be performed.
Assuntos
Humanos , Autopsia , Cadáver , Dissidências e Disputas , Mudanças Depois da Morte , Tomografia Computadorizada por Raios XRESUMO
Objective To study the mechanism of rib fracture caused by landing on different parts of the trunk using finite element method, and to provide some new techniques and new ideas for the reconstruction of the whole process of falls from height. Methods The finite element method was used to study the rib fracture of human security model THUMS4.0 caused by landing on different parts of the trunk. Then the model was compared with actual cases and the mechanism of rib fracture caused by falls from height was analyzed from a biomechanical point of view. Results There were some differences in the stress and strain distribution as well as the rib fracture sites when different parts touched the ground. Ribs on both sides of the body were fractured when the front of the trunk touched the ground, and the fractures were mainly located in the junction of the ribs and costal cartilage and the midaxillary line area. When the right anterior part of the trunk touched the ground, rib fracture occurred first on the side that touched the ground, and rib fractures were mainly located in the area from the right midaxillary line to the posterior axillary line, and junction of ribs on both sides and costal cartilage. When the back of the trunk touched the ground, the fracture sites were mainly located on the back of the ribs on both sides. When the right posterior part of the trunk touched the ground, multiple rib fractures were likely to occur in the parts that touched the ground. The plastic strains were mainly concentrated at the fracture sites, while the von Mises stresses were not only concentrated at the fracture sites, but also at other sites. Conclusion There are some differences in rib fracture location sites and injury mechanisms when different parts of the trunk touch the ground.
Assuntos
Humanos , Acidentes por Quedas , Fenômenos Biomecânicos , Análise de Elementos Finitos , Fraturas das Costelas/etiologia , Costelas , TroncoRESUMO
Objective To assess the accuracy and reliability of the two 3D measuring methods, structured-light scanning and single-camera photogrammetry in forensic body surface damage and scar measurement. Methods The measuring results of 86 injuries by the ruler method, structured-light scanning and single-camera photogrammetry were compared and evaluated. The area measuring results of 13 simulated scars by the structured-light scanning, single-camera photogrammetry, Photoshop lasso pixel method and PDF reading software were compared and evaluated. The time consumed was recorded. The known specification information of the stickers was used as the standard value to compare the measuring accuracy of the ruler method, structural-light scanning and single-camera photogrammetry, and to calculate the root mean square error (RMSE). The consistency evaluation of intraclass correlation coefficient (ICC) for the repeatability of 3 measuring results obtained by different operators and the same operator. Results The differences in results of the two 3D measuring methods and the ruler method had no statistical significance; the differences between measuring results made by the structured-light scanning, single-camera photogrammetry and PDF reading software and that of the Photoshop lasso pixel method had no statistical significance. The post-processing of the single-camera photogrammetry consumed more time than that of other methods. When the long-distance group (10-40 cm) was measured, the results obtained by the ruler method were shorter than the standard value. The RMSE value results were structured-light scanning < single-camera photogrammetry < ruler method. The ICC value intragroup and intergroup were greater than 0.99. Conclusion Both structured-light scanning and single-camera photogrammetry can be applied in recording and measuring forensic body surface damage. The former has better performance in measurement accuracy and stability, while the latter has better color performance but longer post-processing time.
Assuntos
Humanos , Cicatriz , Imageamento Tridimensional , Fotogrametria , Reprodutibilidade dos Testes , SoftwareRESUMO
Objective To evaluate the influence of factors such as the selection of equipment, focal length and the selection of reconstruction quality in the reconstruction software on the reconstruction results of single camera photogrammetry and provide reference for the forensic application of single camera photogrammetry. Methods The 19 skulls were measured by traditional measurement method and single camera photogrammetry. The differences between the two measurement methods and within the group with same equipment but different focal length were analyzed. One skull and one corpse were selected as the research objects. According to the reconstruction quality selection conditions in the photogrammetric software, the experimental group was divided into five grades. The model reconstructed by optical scanner was defined as reference model, while the model reconstructed by single camera photogrammetry was defined as test model. The test model was aligned with the reference model, 3D deviation analysis was carried out and the mean error and root mean square (RMS) values were calculated. Results The differences between EOS 7D zoom group and traditional measurement, and within the group with same equipment had statistical significance (P<0.05). The mean error value and minimum RMS value of the skull reconstructed by single camera photogrammetry and the three-dimensional model of the corpse existed in the medium quality group, and the trend was basically the same. Conclusion The equipment and focal length has no obvious influence on the results of single camera photogrammetry. Lower reconstruction quality can easily cause distortion, while higher reconstruction quality can easily generate noise, so medium quality is preferred.
Assuntos
Medicina Legal , Imageamento Tridimensional , Fotogrametria , Crânio/diagnóstico por imagem , SoftwareRESUMO
Virtual autopsy is a new technique for investigating the morphological changes of cadaveric tissues and organs by medical imaging technology. It has been widely used in the identification of causes of death. Multislice spiral computed tomography (MSCT) has become a routine inspection method in some identification institutions, although it cannot completely replace traditional autopsy, it plays a key auxiliary or substitute role in the identification of certain abnormal causes of death. Plain MSCT scan cannot visualize cadaveric vessels, but can perform cadaveric angiography to determine vascular injury or disease. This technology has entered a rapid development period in recent years, and has made a considerable progress in contrast agent, perfusion methods and imaging methods. This article summarizes several common cadaveric MSCT angiography methods, such as systemic angiography, angiography through cardiopulmonary resuscitation, targeted angiography, and angiography by cardiac puncture, and analyzes and compares the application prospects.
Assuntos
Humanos , Angiografia , Autopsia , Angiografia Coronária , Coração , Tomografia Computadorizada EspiralRESUMO
OBJECTIVES@#To use virtual anatomy technique in the analysis of post-mortem characteristic changes of CT images in the experimental drowning rabbit model and the related parameters in 3D virtual model, so as to explore its application value in the diagnosis of drowning in forensic pathology.@*METHODS@#A model of drowning rabbits was established, with animal models of hemorrhagic shock and mechanical asphyxia as the controls. CT scan was performed on the experimental animals, and the differences in imaging features between the groups were compared by morphological reading of the tomographic images. CT data were imported into Mimics 14.0 software for 3D modeling. The CT values and lung volumes were calculated by the software, and the differences on CT values and lung volumes brought by different causes of death were analyzed.@*RESULTS@#The CT images of lungs in the drowning group showed characteristic ground-glass opacity (diffuse and uniform density increase). There were no obvious abnormalities in hemorrhagic shock group, and only a few similar changes were found in the mechanical asphyxia group. Compared with the controls, the CT values and the lung volumes in the drowning group were significantly increased P<0.05.@*CONCLUSIONS@#Based on post-mortem lung imaging, the combination of CT value and lung volume changes can effectively reflect the virtual anatomical features in drowning, and provide a diagnostic basis for the forensic identification of drowning.
Assuntos
Animais , Coelhos , Afogamento , Pulmão/diagnóstico por imagem , Tomografia Computadorizada por Raios XRESUMO
Postmortem changes on corpses appear immediately after death, and can transform the original structure characteristics of the corpse to different degrees as well as show specific changes on computed tomography (CT) images, sometimes with false positives and false negatives, influencing the identification of injuries or diseases. This paper systematically summarizes the postmortem changes of computed tomography imaging characteristics on corpses, to further expand the application of virtopsy in the practices of forensic pathology identification, and provide reference for the identification of injuries, diseases and changes after normal death.
Assuntos
Humanos , Autopsia , Cadáver , Patologia Legal/instrumentação , Mudanças Depois da Morte , Pesquisa/tendências , Tomografia Computadorizada por Raios XRESUMO
Objective To reconstruct a vehicle-bicycle-cyclist crash accident and analyse the injuries us-ing 3D laser scanning technology, multi-rigid-body dynamics and optimized genetic algorithm, and to provide biomechanical basis for the forensic identification of death cause. Methods The vehicle was measured by 3D laser scanning technology. The multi-rigid-body models of cyclist, bicycle and vehicle were developed based on the measurements. The value range of optimal variables was set. A multi-ob-jective genetic algorithm and the nondominated sorting genetic algorithm were used to find the optimal solutions, which were compared to the record of the surveillance video around the accident scene. Re-sults The reconstruction result of laser scanning on vehicle was satisfactory. In the optimal solutions found by optimization method of genetic algorithm, the dynamical behaviours of dummy, bicycle and ve-hicle corresponded to that recorded by the surveillance video. The injury parameters of dummy were consistent with the situation and position of the real injuries on the cyclist in accident. Conclusion The motion status before accident, damage process by crash and mechanical analysis on the injury of the victim can be reconstructed using 3D laser scanning technology, multi-rigid-body dynamics and opti-mized genetic algorithm, which have application value in the identification of injury manner and analysis of death cause in traffic accidents.
RESUMO
OBJECTIVES@#To explore the application value of postmortem computed tomography (CT) angiography on diagnosis of coronary atherosclerotic stenosis degree.@*METHODS@#Based on the previous experimental results, the postmortem CT angiography device of human isolated heart was improved. Different coronary atherosclerotic stenosis degree of sudden death cases was selected. Before the cardiac anatomy, hearts were removed out completely and CT angiography was performed immediately. The CT angiography results were compared with histopathological findings. Meanwhile, the advantages and disadvantages of the angiography device before and after improvement were compared.@*RESULTS@#The improved angiography device of isolated heart could get better imaging results. The postmortem CT angiography results had high consistency with the histopathological findings on diagnosis of coronary atherosclerotic stenosis degree. And the coronary artery lesions could be revealed more objectively and vividly by 3D reconstruction technology. However, CT angiography could only be used to examine the pathological changes of blood vessels, which might have some limitations on the diagnosis of cause of death.@*CONCLUSIONS@#Postmortem CT angiography can be used as an additional method for the conventional autopsy in the cases of coronary atherosclerosis.
Assuntos
Humanos , Pessoa de Meia-Idade , Autopsia , Angiografia por Tomografia Computadorizada/métodos , Angiografia Coronária , Doença da Artéria Coronariana/diagnóstico por imagem , Estenose Coronária , Coração , Valor Preditivo dos Testes , Tomografia Computadorizada por Raios XRESUMO
OBJECTIVE@#To establish a diagnostic model for diffuse axonal injury (DAI) by matrix-assisted laser desorption/ionization time-of-flight mass spectrometry (MALDI-TOF-MS). To screen the proteins or peptides associated with DAI for providing the biomarkers with theoretic foundation.@*METHODS@#Fifteen male Sprague-Dawley rats were randomly divided into DAI group (n = 10) and control group (n = 5). The protein or peptide expression profiles of rat brain stem were detected by MALDI-TOF-MS. ClinProTools 2.2 software was used to find specific peaks, and a diagnostic model was established by the genetic algorithm.@*RESULTS@#There were significant differences in 61 peaks of DAI group (P < 0.05), 9 peaks were down-regulated and 52 up-regulated. The diagnostic model was established based on 5 different peaks. The specificity and sensitivity of cross validation was 96.14% and 95.98%; while the specificity and sensitivity of blind validation showed was 73.33% and 70.00%, respectively.@*CONCLUSION@#A specific and sensitive diagnostic model of DAI can be established by MALDI-TOF-MS to provide a potential value for determining DAI in forensic practice.
Assuntos
Animais , Masculino , Ratos , Biomarcadores , Tronco Encefálico/metabolismo , Lesão Axonal Difusa/diagnóstico , Regulação para Baixo , Peptídeos/sangue , Proteômica , Ratos Sprague-Dawley , Sensibilidade e Especificidade , Software , Espectrometria de Massas por Ionização e Dessorção a Laser Assistida por Matriz/métodos , Regulação para CimaRESUMO
A case of a stillbirth with lethal type II osteogenesis imperfecta (OI) was reported. The fetus had skull fractures and craniocerebral injuries during pregnancy. Postmortem multi-sliced computed tomography (MSCT) and 3D-reconstruction were performed, followed by a medico-legal autopsy. The autopsic findings showed the typical features of type II OI, including a soft calvarium, deformed extremities, flexed and abducted hips, and uncommon features, such as white sclera, coxa vara, absence of several bones and organs, a cleft lip, and asymmetric ears. The radiologic images revealed such anomalies and variations as a cleft palate, mandibular dysplasia, spina bifida, costa cervicalis, and fusion of the ribs and vertebrae, which were difficult to detect during conventional autopsy. The paper investigated the classification, causative mutation, cause of death, and the differentiation of OI from child abuse, coming to a conclusion that OI knowledge can be of great importance to forensic pathologists and that the merits of postmortem MSCT should be emphasized in forensic pathologic examinations.
Assuntos
Criança , Feminino , Humanos , Recém-Nascido , Gravidez , Autopsia , Morte , Evolução Fatal , Feto , Patologia Legal , Tomografia Computadorizada Multidetectores/métodos , Osteogênese Imperfeita/fisiopatologia , Costelas , Crânio/patologiaRESUMO
OBJECTIVE@#To explore the application value of postmortem multi-slice spiral computed tomography (MSCT) by observing and analyzing the injury features in the traffic accident victims.@*METHODS@#Ten traffic accident victims were scanned with whole body MSCT. The systemic autopsy was subsequently performed to compare with the results of MSCT. The advantages and disadvantages of autopsy and MSCT for obtaining the information of traffic accident injuries were then analyzed.@*RESULTS@#MSCT could reveal 3D shape of fractures clearly and detect air accumulation in different positions of the body, which showed the obvious advantages compared with autopsy. However, the resolution of MSCT was limited compared to the detection of organ and soft tissue injuries.@*CONCLUSION@#A combination of MSCT and autopsy is the best way for determining the manner and the cause of death in traffic fatality victims.
Assuntos
Humanos , Acidentes de Trânsito , Autopsia , Fraturas Ósseas , Lesões dos Tecidos Moles , Tomografia Computadorizada EspiralRESUMO
In the researches of biomechanics for child craniocerebral injury, the research progress of performance parameter detection for brain, skull, cranial suture and dura mater, and the finite element model construction for child's head were reviewed. Meanwhile, the shortcomings of the established finite element model construction of child's head were analyzed. Thus, it is necessary to strengthen the material properties parameter detection of child's head, and establish the relevant database, so as to lay the foundation for establishing an accurate finite element model of child's head.