RESUMO
Objective:To study the precision of 3D printing coplanar template (3D-PCT) assisted CT-guided radioactive particle implantation using two types of phantoms, and compare the differences between the phantoms, in order to provide reference for radioactive particle implantation.Methods:The needle inserting path was designed in the brachytherapy treatment planning system (BTPS) and the needle tip coordinates were obtained. Following the needle inserting path, the implant needles were inserted into the custom and the liver phantoms, respectively. Then gold markers were implanted through the needles. Subsequently, the needles were withdrawn by 10 mm, and the cold sources were implanted. The coordinates of needle tips, gold markers, and cold sources were recorded. The precision of implanted needles, first particles, and particles after needle withdrawal were obtained by calculating the distance between two points in the space. Finally, the differences between the two phantoms were compared through independent samples t-test. Results:In the 3D-PCT-assisted CT-guided radioactive particle implantation, the precision of implanted needles, first particles, and particles after needle withdrawal in the custom and the liver phantoms was (1.89±0.72) and (2.14±0.88 ) mm ( P>0.05), (2.03±1.14) and (2.42±1.12) mm ( P>0.05), and (-1.96±1.29) and (-2.82±0.91) mm ( t=2.09, P=0.046), respectively. Conclusions:The 3D-PCT-assisted CT-guided radioactive particle implantation is efficient, stable, and precise, showing slight precision differences between the two phantoms.
RESUMO
Objective:To study the effect of graphene oxide (GO) on adipose-derived mesenchymal stem cells (Ad-MSCs) to promote diabetic skin wound healing.Methods:Ad-MSCs were cultured with GO at concentration of 100, 200, and 400 μg/mL and with 25 mmol/L of glucose for 48 h. The apoptosis of Ad-MSCs was detected by flow cytometry and Western blotting. Eighteen BALB/c thymus free female nude mice were selected to establish the skin defect model of diabetic nude mice. Then phosphate-buffered saline, Ad-MSCs, and GO+ Ad-MSCs were injected into the damaged skin of nude mice by intradermal injection for treatment, thereby created the control group, Ad-MSCs group, and GO+ Ad-MSCs group, 6 mice each group. The survival of wound cells and skin healing of mice were observed after surgery, and the wound healing was determined by HE staining and Masson staining.The level of epidermal growth factor (EGF), vascular endothelial growth factor (VEGF), tumor necrosis factor-α (TNF-α), and interleukin 6 (IL-6) were determined by enzyme-linked immunosorbent assay (ELISA).Results:Compared with the high glucose group without GO(control group), the apoptosis rate of Ad-MSCs co-culture with GO was significantly reduced( P<0.05), and the apoptosis rate decreased with the increase of GO concentration. The expression level of Bax protein decreased, and the expression level of Bcl-2 protein increased ( P<0.05). Diabetic skin defect model showed that the survival rate of Ad-MSCs and wound healing degree in GO+ Ad-MSCs group were significantly increased ( P<0.05), and the degree of epithelialization and thickness of collagen regeneration were better than those in other groups. ELISA results showed that the expressions of EGF and VEGF were significantly increased in GO+ Ad-MSCs group ( P<0.05), while the expressions of TNF-α and IL-6 were significantly decreased ( P<0.05). Conclusion:GO can inhibit the apoptosis of Ad-MSCs in vitro. In vivo, Ad-MSCs treated with GO have higher survival rate, faster wound healing, and better effect than Ad-MSCs treated alone.
RESUMO
Objective:To investigate the clinical effect of early arthroscopic shoulder treatment of moderate full-thickness tear of the supraspinatus tendon.Methods:A retrospective case control study was conducted to analyze the clinical data of 43 patients with moderate full-thickness supraspinatus tendon tear admitted to First Affiliated Hospital of Xi 'an Jiaotong University from January 2018 to June 2020,including 17 males and 26 females,aged from 41 to 68 years[(55.9±8.2)years]. All patients had arthroscopic shoulder supraspinatus tendon suture and acromioplasty,including 22 patients underwent surgery within 1 month after persistent shoulder pain and motion limitation in early group and 21 patients between 1 month and 3 months in late group. The duration of operation and intraoperative blood loss were recorded. The visual analogue scale(VAS),American Shoulder and Elbow Society(ASES)score and Constant-Murley score were assessed before operation and at postoperative 3 weeks,6 weeks,3 months and 6 months. The complications were detected with 6 months after operation. Results:All patients were followed up for 6-7 months[(6.4±0.4)months]. There was no statistical significance in operation duration and intraoperative blood loss between the two groups( P>0.05). At 3 weeks,6 weeks,3 months and 6 months after operation,there showed significant decrease of VAS but significant increase of ASES and Constant-Murley scores compared to preoperation( P<0.05). At 3 weeks and 6 weeks after operation,the VAS in early group[(4.4±0.9)points,(3.7±0.8)points]was lower than that in late group[(5.5±1.0)points,(4.8±1.1)points];while the ASES score[(49.1±4.6)points,(56.8±4.1)points]and Constant-Murley score[(54.1±4.8)points,(64.1±4.4)points]in early group were higher than those in late group[ASES score:(45.2±5.4)points,(50.3±5.4)points;Constant-Murley score:(50.5±3.3)points,(58.2±3.9)points]( P<0.05). At 3 months and 6 months after operation,the two groups showed no statistical significance in these scores. There were no postoperative complications such as infection or nerve injury in both group within 6 months. Conclusion:For moderate full-thickness tear of the supraspinatus tendon,arthroscopic shoulder surgery performed within 1 month after persistent shoulder pain and motion limitation can achieve better pain relief and faster functional rehabilitation in the short term compared with surgery performed 1-3 months later.
RESUMO
Objective:To verify the accuracy and feasibility of radioactive 125I seed implantation assisted by an optical navigation system and a 3D-printing non-coplanar template in the treatment of recurrent head and neck cancers. Methods:A total of 12 patients with recurrent head and neck cancer treated with radioactive 125I seed implantation assisted by an optical navigation system and 3D-printing non-coplanar template were enrolled from Dec 2018 to Dec 2019.The pre-plan and post-implant implantation needle number and implanted seed number were recorded.Meanwhile, their dosimetric parameters were compared, including D90, minimum peripheral dose (MPD), V100, V150, V200, conformity index (CI), external index (EI), and the homogeneity index (HI) of the target volume. Results:The median lesion volume was 31.5 cm 3, the median number of seeds was 61.5, and the median prescription dose was 130 Gy.The means of the pre-plan D90, MPD, V100, V150 and V200 were 134.2, 64.6, 93.3, 75.3 and 39.3 Gy, respectively, while those of post-implant D90, MPD, V100, V150, and V200 were 146.7, 68.94, 97.47, 80.40 and 48.30 Gy, respectively, with no statistically significant difference ( P>0.05). Meanwhile, there was no statistically significant difference between the pre-plan and post-implantation needle number, implanted seed number, CI, HI, and EI ( P>0.05). In terms of postoperative dose quality assessment, eight cases were rated excellent (66.6%) and four cases were rated good (33.3%). Conclusions:Radioactive 125I seed implantation assisted by an optical navigation system and 3D-printing non-coplanar template can be accurately performed in the treatment of recurrent head and neck cancer, with good consistency between pre-plan and post-implant dosimetric parameters and thus of prospective potential in clinical application.
RESUMO
Objective:To analyze the efficacy and safety of radioactive 125I seed implantation in the treatment of unresectable early-stage non-small cell lung cancer (NSCLC), in order to provide data for clinical practice and relevant research. Methods:A retrospective study was conducted on the data of 39 patients with early-stage NSCLC who received CT-guided radioactive 125I seed implantation from Dec 2010 to Dec 2018 in multiple hospitals.The seed implantation process consisted of preoperative planning and design, CT-guided puncture, seed implantation, and postoperative evaluation and dose verification.The efficacy and complications of the treatment were analyzed.The clinical efficacy was evaluated by adopting the Response Evaluation Criteria in Solid Tumors (RECIST) (v1.1) and the adverse reactions were evaluated using the Common Terminology Criteria for Adverse Events (CTCAE v4.0). Results:All the patients were 70 years old on average (51-85). The median lesion diameter was 2.7 cm (1.1-6.0 cm), the median seed activity was 0.7 mCi (0.6-0.8 mCi), while the median follow-up duration was 29 months (3-97 months). Meanwhile, the 1-, 3-, and 5-year overall local control rates were 89.5%, 79%, and 79%, respectively, and the 1-, 3-, and 5-year overall survival rates were 100%, 74.8%, and 49.9%, respectively.Local recurrence and distant metastasis were the main causes of failure, accounting for 17.9% (7 cases) each.The incidence of pneumothorax was 56.4% (22 cases), among which nine cases (23.1%) required invasive closed thoracic drainage.Only 1 case of grade-2 radiation pneumonia (2.6%) was observed, with no other adverse reactions such as dermatoses, esophagitis, or myelitis being discovered.As indicated by univariate analysis, the patients with KPS scores of 80-90, pathological type of adenocarcinoma, T stage of T 1-2, and D90>180 Gy exhibited better local control ( χ2=6.202, P<0.05). Meanwhile, high D90 was also associated with a higher survival rate ( χ2=6.907, P<0.05). Conclusions:Radioactive 125I seed implantation is a safe and effective treatment for unresectable early-stage NSCLC.In cases where external beam radiotherapy is not available, radioactive 125I seed implantation can be considered as one of the treatment options.Pneumothorax is the most common complication of radioactive 125I seed implantation, and adenocarcinoma (pathological type) and higher values of D90 are predictors of better local control.
RESUMO
Objective:To compare preoperative planning parameters between non-coplanar and coplanar template-assisted radioactive seed implantation in the treatment of pancreatic cancers, in order to guide clinical application.Methods:Patients with pancreatic cancers who received external irradiation in the Peking University Third Hospital from Jan 2017 to May 2019 were selected.Their image information was imported into the brachytherapy planning system, and the non-coplanar plan and coplanar plan were designed individually.Each patient′s prescription dose was set to 110 Gy, and the activity of the radioactive seeds were 0.4 mCi(1 Ci=3.7×10 10Bq), respectively.For the two plans, the dose distribution was optimized and dosimetric parameters were compared, including the implantation needle number, the implanted seed number, the minimum prescription doses delivered to 90% and 100% of the target volume ( D90 and D100), mean percentages of volume receiving 100%, 150% and 200% of the prescription doses ( V100, V150 and V200), conformity index (CI), external index (EI), and homogeneity index (HI) of the target volume, as well as the doses of 2 cm 3 and 5 cm 3 ( D2 cm 3 and D5 cm 3) of the surrounding normal organs such as the small intestines, colon, duodenum, stomach, and spinal cord. Results:The implantation needle number in the coplanar plan was slightly higher than that in the non-coplanar plan, namely 18.63 vs. 16.45 ( t=-3.239, P <0.05). The implanted seed number was equivalent, namely 90.2 vs. 91.01, with no statistical difference ( P>0.05). There was no significant difference between D90, D100, V100, V150, V200, CI, EI, and HI in the target area of the two plans ( P>0.05). Meanwhile, there was no obvious difference in D2 cm 3 and D5 cm 3 of normal organs including the small intestines, colon, duodenum, stomach, and spinal cord ( P>0.05). Conclusions:With both the coplanar plan and the non-coplanar plan, the prescription doses can be achieved and meanwhile, there are very small differences in the doses of normal organs.Given that 3D-printing non-coplanar and coplanar templates have their own characteristics, it is necessary to choose them according to specific situations.
RESUMO
Objective:To explore the accuracy of CT-guided 125I seed implantation assisted by a navigation system and 3D-printing template in the treatment of recurrent malignant pelvic tumors by comparing pre-plan and intraoperative physical dosimetric parameters. Methods:This study involved 15 patients with recurrent malignant pelvic tumors who received CT-guided radioactive 125I seed implantation assisted by a navigation system and 3D-printing template in the Peking University Third Hospital from Dec 2018 to Feb 2020.Seven of the patients had cervical cancers, seven had rectal cancers, and one had prostate cancer.The median age was 55 years (34-84 years old). The prescription dose was 100-150 Gy.The pre-plan and post-implant data were compared, including the number of implanted seeds, implantation needle number, and some dosimetric parameters such as the minimum prescription doses delivered to 90% and 100% of target volume( D90, D100), mean percentages of volume receiving 100%, 150%, and 200% of the prescription doses( V100, V150, and V200), conformity index(CI), external index(EI), and homogeneity index(HI)of the target volume. Results:The median lesion volume was 29.20 cm 3, the median seed number was 54, and the median D90 was 150 Gy.The post-implant V150 was lower than pre-plan V150 (64.1% vs. 67.1%, t=2.937, P=0.011), and the post-implant mean HI was higher than pre-plan HI (32.01% vs. 26.68%, t=-2.950, P=0.011). There were no significant differences in other dosimetric parameters before and after seed implantation. Conclusions:With CT-guided radioactive seed implantation assisted by a navigation system and 3D-printing template in the treatment of recurrent malignant pelvic tumors, the actual postoperative dose could meet the preoperative plan requirement, ensuring the accuracy and consistency of the dose delivered.
RESUMO
Interstitial permanent radioactive seed implantation delivers a high local dose to tumors and sharply drops off at surrounding normal tissues. Radioactive seeds implanted via ultrasound or computed tomography (CT) guidance are minimally invasive and facilitate quick recovery. Transrectal ultrasound-guided 125I seed implantation assisted by a transperineal plane template is standard for early-stage prostate carcinoma, with a highly consistent target volume dose distribution. The postplan dose evaluation is consistent with the preplan evaluation. Until now, there was no workflow for seed implantation elsewhere in the body, and it was difficult to effectively preplan for seed implantation because of patients' position changes, organ movement, and bone structure interference. Along with three-dimensional (3D) printing techniques and seed implantation planning systems for brachytherapy, coplanar and X Y axis coordinate templates were created, referred to as 3D-printed coplanar templates (3D-PCT). 125I seed implantation under CT guidance with 3D-PCT assistance has been very successful in some carcinomas. Preplanning was very consistent with postplanning of the gross tumor volume. All needles are kept parallel for 3D-PCT, with no coplanar needle rearrangement. No standard workflow for 3D-PCT-assisted seed implantation exists at present. The consensus topics for CT-assisted guidance compared to 3D-PCT-assisted guidance for seed implantation are as follows: Indications for seed implantation, preplanning, definition of radiation doses and dosimetry evaluation, 3D-PCT workflow, radiation protection, and quality of staff. Despite current data supporting 125I seed implantation for some solid carcinomas, there is a need for prospectively-randomized multicenter clinical trials to gather strong evidence for using 125I seed implantation in other solid carcinomas
RESUMO
Objective To compare the preoperative and postoperative dosimetric parameters in the treatment of spinal metastasis,and to verify the accuracy of 3D-printing non-coplanar template (3D-PNCT)combined with CT-guided 125I seed implantation for the treatment of spinal metastasis.Methods The treatment plans of 7 patients with spinal metastasis (9 lesions) from 2016 to 2018 receiving 3D-PNCT in combination with CT-guided 125I seed implantation were retrospectively analyzed.The dosimetric parameters including homogeneity index (HI),conformal index (CI),external index (EI),dose of 90% target volume (Dg0),mPD,volume percent of 100%,150%,and 200% prescribed dose V100、V150、V200 and D2cm3 of spinal cord were compared before and after operation.The british columbia cancer ageny particle implantation quality evaluation standard was applied to evaluate the quality of implantation.Results The HI,EI and CI,Dg0,mPD,V100,V150,V200 and D2cm3 of spinal cord did not significantly differ before and after the plan (all P>0.05).Five were evaluated as excellent and 4 were assessed as good.Conclusion The postoperative dosimetric parameters of 3D-PNCT combined with CT guided 125I seed implantation of spinal metastasis are basically consistent with preoperative dosimetric parameters.The postoperative plans are evaluated as excellent or good,suggesting that the technology has a good therapeutic accuracy in the treatment of spinal metastasis.
RESUMO
Objective:To compare the difference of preoperative and postoperative plans of navigation-assisted three-dimensional (3D)-printing template combined with CT-guided radioactive 125I seeds implantation for malignant tumors, and verify preliminarily the plan quality of optical navigation-assisted seeds implantation. Methods:From December 2018 to November 2019, a total of 20 patients (10 males, 10 females, median age: 60.5 years) with malignant tumors received navigation-assisted 3D-printing template combined with CT-guided radioactive 125I seeds implantation in Peking University Third Hospital. Eight cases were implanted in the head and neck, 1 case in the chest wall, 9 cases in the pelvis and 2 cases in the paravertebral and/or retroperitoneal region. The median prescription dose was 150 Gy. The data in the preoperative and postoperative plans was compared, including seeds number, needles number, and some dosimetry parameters. Dosimetry parameters including dose delivered to 90% gross tumor volume (GTV) ( D90), percentage of GTV received 100%, 150%, and 200% of the prescribed dose ( V100, V150, V200), minimum peripheral dose (MPD), conformal index (CI), external index (EI), homogeneity index (HI) of target volume, and 2 cm 3 range of spinal cord receiving dose ( D2 cm 3). Paired t test and Wilcoxon signed rank test were used to analyze the data. Results:The needles number of preoperative and postoperative plans was the same (both 12 (9, 19)), and the seeds number of postoperative plan was more than preoperative plan with no significant difference (51(35, 68) vs 49(35, 63); z=1.859, P>0.05). The MPD of postoperative plans was higher than preoperative plans ((80.52±14.89) vs (67.22±20.56) Gy, t=-3.769, P=0.001). There were no significant differences in other dosimetry parameters between the two plans ( t values: -0.533, -0.423, z values: from -0.849 to 1.416, all P>0.05). Postoperative dose quality assessment was excellent in 17 cases (17/20), good in 2 cases (2/20) and middle in 1 case (1/20). Conclusions:The quality of the implantation is good under the guidance of combined mode. The actual target dose after operation can meet the requirements of preoperative planning.
RESUMO
Objective@#To compare the preoperative and postoperative dosimetric parameters in the treatment of spinal metastasis, and to verify the accuracy of 3D-printing non-coplanar template (3D-PNCT) combined with CT-guided 125I seed implantation for the treatment of spinal metastasis.@*Methods@#The treatment plans of 7 patients with spinal metastasis (9 lesions) from 2016 to 2018 receiving 3D-PNCT in combination with CT-guided 125I seed implantation were retrospectively analyzed. The dosimetric parameters including homogeneity index (HI), conformal index (CI), external index (EI), dose of 90% target volume(D90), mPD, volume percent of 100%, 150%, and 200% prescribed dose V100、V150、V200 and D2cm3 of spinal cord were compared before and after operation. The british columbia cancer ageny particle implantation quality evaluation standard was applied to evaluate the quality of implantation.@*Results@#The HI, EI and CI, D90, mPD, V100, V150, V200 and D2cm3 of spinal cord did not significantly differ before and after the plan (all P>0.05). Five were evaluated as excellent and 4 were assessed as good.@*Conclusion@#The postoperative dosimetric parameters of 3D-PNCT combined with CT guided 125I seed implantation of spinal metastasis are basically consistent with preoperative dosimetric parameters. The postoperative plans are evaluated as excellent or good, suggesting that the technology has a good therapeutic accuracy in the treatment of spinal metastasis.
RESUMO
Objective To compare the dose distribution of postoperative plans with preoperative plans of 3D-printing template (coplanar and non-coplanar) assisted and CT-guided 125I seed implantation for the treatment of soft tissue sarcoma,and to explore the accuracy of treatment at dosimetry level.Methods From December 2015 to July 2017,19 patients with soft tissue sarcoma (a total of 25 lesions)were treated with 3D printing template assisted and CT-guided 125I seed implantation in Peking University Third Hospital.All patients underwent preoperative assessment,CT simulation orientation,preoperative planning,3D-template printing,3D-template reduction,needle and seed implantation,postoperative dosimetry assessment,postoperative care and follow-up.The preoperative and postoperative dosimetric parameters were conpared.Ten cases of soft tissue sarcoma in superficial trunk or limbs were screened.Preoperative planning of coplanar template and non-coplanar template were designed respectively.The dosimetric parameters of preoperative planning guided of two templates were compared.Results Twentyfive 3D-printing templates were designed and constructed,and 25 lesions were totalled.There was no statistical difference between preoperative and postoperative dosimetric parameters.There was no statistical difference of the preoperative plan's dosimetric parameters between coplanar and non-coplanar in soft tissue sarcoma of superficial trunk/limbs.Conclusions The validation of actual dose distribution in postoperative plans assisted by 3D-printing template in 125I seed implantation showed that most of parameters could meet the expectation of preoperative plans,which indicated the improvement in accuracy for this new modality.For soft tissue sarcoma located in the superficial trunk/limbs,it was recommended to select the 3D-printing coplanar template firstly.
RESUMO
Objective To investigate the feasibility of 3D-printing coplanar coordinate template (3D-PCT) for guiding 125I radioactive seed implantation in the treatment of pelvic wall recurrence of cervical cancer on ensuring the accuracy of dose.Methods From Oct 2016 to Dec 2017 in Peking University Third Hospital,totally 10 patients with pelvic wall recurrent cervical cancer after radiotherapy were treated with 125I radioactive seed implantation assisted by 3D-PCT.The median age was 53.5 years old (37-71 years old).KPS score of the cohort were more than 70.All patients had received pelvic radiation therapy previously.The median volume of the lesion was 31.9 cm3 (3.5-58.0 cm3).The prescription dose was 120-180 Gy.The activity of seeds was 0.55-0.67 mCi(1 Ci =3.7 × 1010Bq),while the number of seeds was 12-81 (median 50) on preoperative plan.Radioactive seeds implantation was performed under 3D-PCT guidance according to the preoperative plan.The actual number of implanted seeds was 53 (10-82).Dosimetry parameters of preoperative plan and postoperative plan including D90,D100,V100,V150,V200,external index (EI),conformal index (CI),heterogeneity index (HI),and organat-risk doses of D2 cm3,D1 cm3 and D0.1 cm3 were compared using the nonparametric test.Results The seed number of postoperative plan was more than that of preoperative plan (Z =-2.255,P < 0.05),but all of the dosimetric parameters showed no significant difference (P > 0.05).D2 cm3 and D1 cm3 of rectum for postoperative plan were lower than that of preoperative plan (Z =-2.100,-2.240,P < 0.05),while other dose parameters of normal tisssues showed no statistically significant difference (P > 0.05).Conclusions Assisted by 3D-PCT for 125I radioactive seed implantation in pelvic wall recurrence of cervical cancer,the actual postoperative dose could meet the requirement of the preoperatie plan through the intraoperative optimization of dose.3D-PCT could ensure the precise of delivered dose of 125I radioactive seed implantation.
RESUMO
Objective To compare the dose distributions of postoperative plans with preoperative plans for 3D printing guide plate assist radioactive seeds implantations, explore the effects of the technology for seeds implantations in dosimetry level. Methods From January 2016 to December 2016, a total of 42 patients of local recurrent malignant tumor of head and neck received 3D printing guide plate assist radioactive seeds implantations in in Peking University Third Hospital, and included in the retrospective study. The prescribed dose was 110 -160 Gy. All patients carried out preoperative planning design, individual guide plate production, and compared the dose distribution of postoperative plan with preoperative plan. Dose parameters include D90 , mPD, V100 , V150 , V200 , CI, EI and HI. Statistical method was paired t-test. Results A total of 423D printing individual templates were produced. The mean GTV volume of all patients was 28. 6 cm3 , and mean D90 of postoperative target area ( GTV) was 142. 6 Gy. For postoperative plans, the mean D90 , mPD, V100 , V150, V200 was 142. 6 Gy, 77. 3 Gy, 92. 48%, 68. 40%and 42. 98%, respectively, and 144. 5 Gy, 70. 2 Gy, 91. 45%, 63. 12% and 34. 74%, respectively, in preoperative plans. Except mPD, V150, V200(t= -2. 166, -2. 863, -4. 778, P<0. 05), there was no significant difference between the two groups. Conclusions 3D printing guide plate could provide good accuracy for positioning and direction. For local recurrent malignant tumor of head and neck, the actual dose distributions in postoperative validations were close to the expectations of preoperative plans which mean the improvement of accuracy in treatment.
RESUMO
Objective To investigate the utilization rate of gold fiducial markers and reasons for abandonment of gold fiducial markers in the CyberKnife VSI System, and to provide reference data for implantation of gold fiducial markers and radiotherapy planning. Methods From March to August,2017,a total of 47 patients had gold fiducial markers implanted or pasted. In those patients, 42 patients had gold fiducial markers implanted,including 32 receiving computed tomography(CT)-guided 3D-printing coplanar template assisted implantation, 1 receiving CT-guided 3D-printing non-coplanar template assisted implantation,1 receiving CT-guided implantation,and 8 receiving ultrasound-guided implantation. A total of 44 patients received the CyberKnife treatment, including 2 patients who failed to use gold fiducial markers and were treated with spine tracking instead and 3 patients missing the treatment for other reasons. The numbers of utilized and abandoned gold fiducial markers were recorded for calculation of the utilization and abandonment rates. The reasons for abandonment of gold fiducial markers were analyzed and classified. Results A total of 134 gold fiducial markers were implanted into or pasted to the 44 patients.In all the gold fiducial markers, 111 were utilized and 23 abandoned, yielding a utilization rate of 82.8% and an abandonment rate of 17.2%.The reasons for abandonment of gold fiducial markers included large rigidity error(26.1%), unqualified implanted fold fiducial markers(17.4%), displacement of gold fiducial markers(26.1%), and others(30.4%). Conclusions Compared with the CT-guided or ultrasound-guided implantation of gold fiducial markers, the CT-guided 3D-printing coplanar or non-coplanar template assisted implantation of gold fiducial markers requires only two puncture needles for each implantation and implants two gold fiducial markers by a single needle,which reduces the number of puncture needles,risk of puncture-induced injury,and incidence of complications after implantation. Not all the gold fiducial markers implanted by a variety of ways will be utilized. Some gold fiducial markers will be abandoned for different reasons,which should be taken into account during implantation of gold fiducial markers.
RESUMO
Objective To evaluate the clinical efficacy and safety of CT-guided 125 I seed implantation in the treatment of recurrent head and neck tumors after radiotherapy. Methods Clinical data of 101 patients who received CT-guided radioactive 125 I seed implantation for recurrent head and neck cancer after radiotherapy from 2007 to 2015 were retrospectively analyzed. The median accumulated dose of external radiotherapy was 66 Gy and the median dose after seed implantation (D90) was 117 Gy. The local progression-free survival and overall survival were analyzed by Kaplan-Meier method. Univariate analysis was performed by log-rank test and multivariate analysis was conducted by using Cox regression model. Results The median follow-up time was 12. 2 months. The 5-year local progression-free survival rate was 26. 6%.The 5-year overall survival rate was 15. 5%. Univariate analysis demonstrated that age,pathological type,implantation site,lesion volume,D90 and short-term efficacy were correlated with local control,and KPS score,lesion volume ,D90,and short-term efficacy were associated with survival (all P<0. 05). Multivariate analysis revealed that pathological type,lesion volume ,D90 and short-term efficacy were independent factors related to local control (P= 0. 000, 0. 002,0. 003 and 0. 014).In terms of the adverse events,skin/ mucosal ulceration was observed in 25. 7% and pain occurred in 13. 9% of all patients. No correlation was noted between the adverse events and dose.Conclusions CT-guided radioactive 125 I seed implantation is an efficacious and safe treatment of recurrent head and neck tumors after radiotherapy. Non-squamous carcinoma,small lesion volume and high dose (D90) indicate excellent local control.
RESUMO
Objective To verify the accuracy of three-dimensional printing coplanar coordinate template (3D-PCCT) technology for 125I seeds implantations in chest tumor at dosimetry level.Methods From January 2016 to June 2017,a total of 22 patients (15 males,7 females;median age 62 years) with chest tumors who received 3D-PCCT assisted 125I seeds implantation in Peking University Third Hospital were enrolled in this retrospective study.There were 8 patients with primary lung cancer and 14 with metastatic carcinoma.The sites for implantation included lung (12 cases),mediastinum (2 cases) and chest wall (8 cases).The prescribed dose was 110-180 Gy.The preoperative plan design,puncture and seeds implantation guided by template were carried out and the dose distribution of postoperative plan was compared with that of preoperative plan.Dose parameters included dose delivered to 90% gross tumor volume (D90),minimum peripheral dose,the percentage of GTV receiving 100% prescription dose (V100),the percentage of GTV receiving 150% prescription dose (V150),conformity index,external index of target volume,uniformity index,D2 cm3 of spinal cord and aorta,and V20 of affected side lung.Wilcoxon signed rank test was used to analyze the data.Results The median D90 was 150.4(125.6,187.0) Gy.Postoperative D90 was higher than the prescribed dose in 68% (15/22) cases.For median value of most parameters,there were no significant differences between the postoperative plans and preoperative plans (all P>0.05) except for the actual V100,which was lower than the preplanned (95.5% vs 97.2%;P=O.040).Conclusion 3D-PCCT could provide good accuracy in 125I seeds implantation for chest tumor.
RESUMO
As an interstitial brachytherapy,radioactive seed implantation could provide high doses in the local site and minimal doses at surrounding normal tissues.It has become one of the best choice for early stage prostate carcinoma.Radioactive seeds were implanted under the guidance by ultrasound,CT and MRI,featured with surgical and interventional treatment.Based on dosimetry for target and organs at risk,radioactive seed implantation is multiple disciplinary.In order to acquire the accurate and high quality seed implantation,it is necessary to set up a team including surgeons,radiation oncologists,interventional doctors and nuclear medicine doctors.The content of the consensus is as follows:radiation physics and dosimetry,indications,side-effects and 3 D-printing template work-follow.Despite the benefit of radioactive seed implantation for solid carcinoma,there still a compelling need for prospective randomized and stage Ⅲ clinical trials from multiple centers,so as to upgrade the evidencebased level,above all confirm the role of radioactive seed implantation in the comprehensive treatment of tumors.
RESUMO
Objective: To compare the dosimetric data between the preoperative plans and postoperative verification in personalized 3D printed template-assisted and computed tomography (CT) image-guided 125-iodine seed implantation for supraclavicular metastatic tumor, and to evaluate the accuracy and feasibility at the dosimetry level.Methods: A total of 14 patients with supraclavicular metastatic tumor (including 15 lesions) who received 3D printed template assisted and CT image-guided 125-iodine seed implantation in Department of Radiation Oncology of Peking University Third Hospital from January to September 2016 were enrolled.There were 8 males and 6 females, aged from 46 to 79 years (mean age: 59.9 years).The Karnofsky performance score (KPS) was from 60 to 90 (median of 80).There were one patient who had not received radiotherapy before, and one patient had received radiotherapy, but the dose was unknown.The remaining 12 patients had received radiotherapy, with the median of 60 Gy (20-70 Gy), and one of them with the dose unknown.All the patients underwent preoperative enhanced CT scan, preoperative planning design, 3D printing template, puncture and particle implantation, the prescription dose from 110 Gy to 150 Gy.Comparisons of the dosimetric parameters between the postoperative verification and preoperative plans were made by paired t-test.The dose parameters inclu-ded D90, V100, V150, V200, matched peripheral dose (mPD), conformal index (CI), and external index (EI).The agreement was evaluated between the preoperative planning and postoperative actual dose parameters using Bland-Altman analysis.Bland-Altman plot showed the difference against the average of preoperative planning and postoperative actual dose parameters with limits of agreement (LoA) (broken lines).Results: The difference of all the data between pre-and postoperation, included D90, V100, V150, V200, mPD, and CI, which was not statistically significant (P>0.05).EI was statistically significant (P<0.05).There was poor consistency of D90, V100, V150, V200, and mPD, but better consistency of CI and EI.Conclusion: Personalized 3D printed template-assisted and CT image-guided 125-iodine seed implantation for supraclavicular metastatic tumor is accurate and feasible.
RESUMO
Objective To compare the pre-and post-operative tumor target volume and to examine the consistency in physical dosimetric parameters of organs at risk (OAR) following 3D-printed coplanar template (3D-PCT)-assisted and CT-guided radioactive seed implantation.Methods The 3D-printed coplanar template was designed using a computer software, and the coordinate system was established where the center was used as the basis for setting the x axis and y axis.Crosses defining the center of treatment were drawn on the patient''s body and matched with the corresponding central point, x axis, and y axis of the coplanar template.3D-PCT-assisted and CT-guided radioactive seed implantation was performed based on the pre-operative plan, and the pre-operative, operative, and post-operative plans were designed to evaluate the target tumor volume and the normal dose received by the tissues.In addition, dosimetric parameters, including D90(minimum dose received by 90% of the gross target volume), V100, V150, V200(percentage of GTV that received 100%, 150%, and 200% of the prescribed dose, respectively), minimum peripheral dose (MPD), conformal index (CI), external index (EI), and homogeneity index (HI) in the pre-operative and post-operative plans were also assessed and compared using the Wilcoxon test. Results Fourteen patients treated in our institution from August to October, 2016 were included in this study. The median age of the patients was 61.5 years, and the median Karnofsky Performance Scale score was 80. A total of 14 lesions from the 14 patients were treated by seed implantation in the neck (n=4), chest (n=3), abdomen (n=5), and pelvis (n=2). Of the 14 patients that underwent implantation, 8 had previously received radiation therapy, and 6 had not received radiation therapy. Dosage optimization was performed for all patients during the operation. The median activity of the implanted seeds was 0.625 mCi (0.55-0.75 mCi,1 Ci=3.7×1010 Bq), and the preoperatively planned median number of needling and implanted seeds were 9(4-34) and 45.5(10-162), respectively. However, the actual median number of needling and implanted seeds were 9.5(4-34) and 45.5(10-162), respectively. Dosimetric analysis showed that there were no significant changes in tumor volume (P=0.135), D90(P=0.208), MPD (P=0.104), V100(P=0.542), V150(P=0.754), V200(P=0.583), CI (P=0.426), EI (P=0.326), and HI (P=0.952) after implantation. Conclusions 3D-PCT guidance and dosage optimization can result in good consistency between pre-and post-operative plans for radioactive seed implantation. 3D-PCT is a convenient and cheap technique suitable for large-scale clinical application.